config BASLER_EXCITE
bool "Basler eXcite smart camera"
+ select CEVT_R4K
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
config BCM47XX
bool "BCM47XX based boards"
+ select CEVT_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
config MIPS_COBALT
bool "Cobalt Server"
+ select CEVT_R4K
+ select CEVT_GT641XX
select DMA_NONCOHERENT
select HW_HAS_PCI
+ select I8253
select I8259
select IRQ_CPU
select IRQ_GT641XX
config MACH_DECSTATION
bool "DECstations"
select BOOT_ELF32
+ select CEVT_R4K
select DMA_NONCOHERENT
select NO_IOPORT
select IRQ_CPU
select ARC
select ARC32
select ARCH_MAY_HAVE_PC_FDC
+ select CEVT_R4K
select GENERIC_ISA_DMA
select IRQ_CPU
+ select I8253
select I8259
select ISA
select PCSPEAKER
config LASAT
bool "LASAT Networks platforms"
+ select CEVT_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select HW_HAS_PCI
+ select IRQ_CPU
select PCI_GT64XXX_PCI0
select MIPS_NILE4
select R5000_CPU_SCACHE
config LEMOTE_FULONG
bool "Lemote Fulong mini-PC"
select ARCH_SPARSEMEM_ENABLE
+ select CEVT_R4K
select SYS_HAS_CPU_LOONGSON2
select DMA_NONCOHERENT
select BOOT_ELF32
config MIPS_ATLAS
bool "MIPS Atlas board"
select BOOT_ELF32
+ select CEVT_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select IRQ_CPU
bool "MIPS Malta board"
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
+ select CEVT_R4K
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
select IRQ_CPU
select HW_HAS_PCI
+ select I8253
select I8259
select MIPS_BOARDS_GEN
select MIPS_BONITO64
config MIPS_SEAD
bool "MIPS SEAD board"
+ select CEVT_R4K
select IRQ_CPU
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
config MIPS_SIM
bool 'MIPS simulator (MIPSsim)'
+ select CEVT_R4K
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select IRQ_CPU
config MARKEINS
bool "NEC EMMA2RH Mark-eins"
+ select CEVT_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
config MACH_VR41XX
bool "NEC VR4100 series based machines"
+ select CEVT_R4K
select SYS_HAS_CPU_VR41XX
select GENERIC_HARDIRQS_NO__DO_IRQ
config PMC_YOSEMITE
bool "PMC-Sierra Yosemite eval board"
+ select CEVT_R4K
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
config QEMU
bool "Qemu"
+ select CEVT_R4K
select DMA_COHERENT
select GENERIC_ISA_DMA
select HAVE_STD_PC_SERIAL_PORT
+ select I8253
select I8259
+ select IRQ_CPU
select ISA
select PCSPEAKER
select SWAP_IO_SPACE
select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
- select ARCH_SPARSEMEM_ENABLE
select GENERIC_HARDIRQS_NO__DO_IRQ
select NR_CPUS_DEFAULT_1
select SYS_SUPPORTS_SMP
select ARC
select ARC32
select BOOT_ELF32
+ select CEVT_R4K
select DMA_NONCOHERENT
select HW_HAS_EISA
+ select I8253
select IP22_CPU_SCACHE
select IRQ_CPU
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select ARC
select ARC32
select BOOT_ELF32
+ select CEVT_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
+ select IRQ_CPU
select R5000_CPU_SCACHE
select RM7000_CPU_SCACHE
select SYS_HAS_CPU_R5000
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
config SNI_RM
select ARC32 if CPU_LITTLE_ENDIAN
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
+ select CEVT_R4K
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
select HW_HAS_EISA
select HW_HAS_PCI
select IRQ_CPU
+ select I8253
select I8259
select ISA
select PCSPEAKER
config TOSHIBA_JMR3927
bool "Toshiba JMR-TX3927 board"
+ select CEVT_TXX9
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_TX3927
config TOSHIBA_RBTX4927
bool "Toshiba RBTX49[23]7 board"
+ select CEVT_R4K
+ select CEVT_TXX9
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
config TOSHIBA_RBTX4938
bool "Toshiba RBTX4938 board"
+ select CEVT_R4K
+ select CEVT_TXX9
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
config WR_PPMC
bool "Wind River PPMC board"
+ select CEVT_R4K
select IRQ_CPU
select BOOT_ELF32
select DMA_NONCOHERENT
bool
default y
+config GENERIC_CLOCKEVENTS
+ bool
+ default y
+
config GENERIC_TIME
bool
default y
config BOOT_RAW
bool
+config CEVT_BCM1480
+ bool
+
+config CEVT_GT641XX
+ bool
+
+config CEVT_R4K
+ bool
+
+config CEVT_SB1250
+ bool
+
+config CEVT_TXX9
+ bool
+
+config CSRC_BCM1480
+ bool
+
+config CSRC_SB1250
+ bool
+
config CFE
bool
menu "CPU selection"
+source "kernel/time/Kconfig"
+
choice
prompt "CPU type"
default CPU_R4X00
depends on SYS_SUPPORTS_MULTITHREADING
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
- select CPU_MIPSR2_SRS
select MIPS_MT
select NR_CPUS_DEFAULT_2
select SMP
depends on CPU_MIPS32_R2
#depends on CPU_MIPS64_R2 # once there is hardware ...
depends on SYS_SUPPORTS_MULTITHREADING
+ select GENERIC_CLOCKEVENTS_BROADCAST
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
- select CPU_MIPSR2_SRS
select MIPS_MT
select NR_CPUS_DEFAULT_8
select SMP
depends on SYS_SUPPORTS_MULTITHREADING
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
- select CPU_MIPSR2_SRS
select MIPS_MT
help
Includes a loader for loading an elf relocatable object
config CPU_MIPSR2_IRQ_EI
bool
-#
-# Shadow registers are an R2 feature
-#
-config CPU_MIPSR2_SRS
- bool
-
config CPU_HAS_SYNC
bool
depends on !CPU_R3000
default y
+config GENERIC_CLOCKEVENTS_BROADCAST
+ bool
+
#
# Use the generic interrupt handling code in kernel/irq/:
#
but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
- The name comes from the similiarity to the exec system call.
+ The name comes from the similarity to the exec system call.
It is an ongoing process to be certain the hardware in a machine
is properly shutdown, so do not be surprised if this code does not
bool
default y
+config I8253
+ bool
+
config PCSPEAKER
bool
source "fs/Kconfig"
-source "arch/mips/oprofile/Kconfig"
+source "kernel/Kconfig.instrumentation"
source "arch/mips/Kconfig.debug"
projects / linux-2.6 / blobdiff