#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
#include <linux/usb/musb.h>
+#endif
#include <asm/bfin5xx_spi.h>
#include <asm/cplb.h>
#include <asm/dma.h>
#include <asm/gpio.h>
#include <asm/nand.h>
+#include <asm/portmux.h>
#include <asm/mach/bf54x_keys.h>
#include <linux/input.h>
#include <linux/spi/ad7877.h>
};
#endif
-#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE)
-static struct resource bf54x_hcd_resources[] = {
- {
- .start = 0xFFC03C00,
- .end = 0xFFC040FF,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device bf54x_hcd = {
- .name = "bf54x-hcd",
- .id = 0,
- .num_resources = ARRAY_SIZE(bf54x_hcd_resources),
- .resource = bf54x_hcd_resources,
-};
-#endif
-
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
static struct resource musb_resources[] = {
[0] = {
};
static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_MUSB_OTG
+#if defined(CONFIG_USB_MUSB_OTG)
.mode = MUSB_OTG,
-#elif CONFIG_USB_MUSB_HDRC_HCD
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
.mode = MUSB_HOST,
-#elif CONFIG_USB_GADGET_MUSB_HDRC
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
.mode = MUSB_PERIPHERAL,
#endif
- .multipoint = 1,
+ .multipoint = 0,
};
static u64 musb_dmamask = ~(u32)0;
},
{
.name = "File System",
- .offset = 4 * SIZE_1M,
- .size = (256 - 4) * SIZE_1M,
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
},
};
};
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
static struct platform_device bf54x_sdh_device = {
.name = "bfin-sdh",
.id = 0,
};
#endif
+static struct mtd_partition ezkit_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x40000,
+ .offset = 0,
+ }, {
+ .name = "Kernel",
+ .size = 0xE0000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "RootFS",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+ .width = 2,
+ .parts = ezkit_partitions,
+ .nr_parts = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+ .start = 0x20000000,
+ .end = 0x20ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ezkit_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &ezkit_flash_resource,
+};
+
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
.mask_flags = MTD_CAP_ROM
}, {
.name = "linux kernel",
- .size = 0x1c0000,
- .offset = 0x40000
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
}
};
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
- .cs_change_per_word = 1,
+ .cs_change_per_word = 0,
.enable_dma = 0,
.bits_per_word = 16,
};
};
#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
static struct spi_board_info bf54x_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
.controller_data = &spi_ad7877_chip_info,
},
#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &spidev_chip_info,
+ },
+#endif
};
/* SPI (0) */
};
/* SPI controller data */
-static struct bfin5xx_spi_master bf54x_spi_master_info = {
+static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bf54x_spi_master0 = {
.num_resources = ARRAY_SIZE(bfin_spi0_resource),
.resource = bfin_spi0_resource,
.dev = {
- .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+ .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
},
};
+static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+};
+
static struct platform_device bf54x_spi_master1 = {
.name = "bfin-spi",
.id = 1, /* Bus number */
.num_resources = ARRAY_SIZE(bfin_spi1_resource),
.resource = bfin_spi1_resource,
.dev = {
- .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+ .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
},
};
#endif /* spi master and devices */
.resource = bfin_twi0_resource,
};
+#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
static struct resource bfin_twi1_resource[] = {
[0] = {
.start = TWI1_REGBASE,
.resource = bfin_twi1_resource,
};
#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+ {BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"},
+ {BTN_1, GPIO_PB9, 1, "gpio-keys: BTN1"},
+ {BTN_2, GPIO_PB10, 1, "gpio-keys: BTN2"},
+ {BTN_3, GPIO_PB11, 1, "gpio-keys: BTN3"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+ .buttons = bfin_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &bfin_gpio_keys_data,
+ },
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+ .start = 0,
+ .end = MAX_BLACKFIN_GPIOS - 1,
+ .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+ .name = "simple-gpio",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &bfin_gpios_resources,
+};
static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&smsc911x_device,
#endif
-#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE)
- &bf54x_hcd,
-#endif
-
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
&musb_device,
#endif
&bf5xx_nand_device,
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
&bf54x_sdh_device,
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
&i2c_bfin_twi0_device,
+#if !defined(CONFIG_BF542)
&i2c_bfin_twi1_device,
#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &bfin_device_gpiokeys,
+#endif
+
+ &bfin_gpios_device,
+ &ezkit_flash_device,
};
-static int __init stamp_init(void)
+static int __init ezkit_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
return 0;
}
-arch_initcall(stamp_init);
+arch_initcall(ezkit_init);