#include <asm/blackfin.h>
#include <asm/trace.h>
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
-.global __rambase
-.global __ramstart
-.global __ramend
.extern ___bss_stop
.extern ___bss_start
.extern _bf53x_relocate_l1_mem
SSYNC;
#endif
-#ifdef CONFIG_BF537_PORT_H
- p0.h = hi(PORTH_FER);
- p0.l = lo(PORTH_FER);
- R0.L = W[P0]; /* Read */
- SSYNC;
- R0 = 0x0000;
- W[P0] = R0.L; /* Write */
- SSYNC;
- W[P0] = R0.L; /* Disable peripheral function of PORTH */
- SSYNC;
-#endif
-
/* Initialise UART - when booting from u-boot, the UART is not disabled
* so if we dont initalize here, our serial console gets hosed */
- p0.h = hi(UART_LCR);
- p0.l = lo(UART_LCR);
+ p0.h = hi(BFIN_UART_LCR);
+ p0.l = lo(BFIN_UART_LCR);
r0 = 0x0(Z);
w[p0] = r0.L; /* To enable DLL writes */
ssync;
- p0.h = hi(UART_DLL);
- p0.l = lo(UART_DLL);
+ p0.h = hi(BFIN_UART_DLL);
+ p0.l = lo(BFIN_UART_DLL);
r0 = 0x0(Z);
w[p0] = r0.L;
ssync;
- p0.h = hi(UART_DLH);
- p0.l = lo(UART_DLH);
+ p0.h = hi(BFIN_UART_DLH);
+ p0.l = lo(BFIN_UART_DLH);
r0 = 0x00(Z);
w[p0] = r0.L;
ssync;
- p0.h = hi(UART_GCTL);
- p0.l = lo(UART_GCTL);
+ p0.h = hi(BFIN_UART_GCTL);
+ p0.l = lo(BFIN_UART_GCTL);
r0 = 0x0(Z);
w[p0] = r0.L; /* To enable UART clock */
ssync;
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
call _start_dma_code;
#endif
__FINIT
.section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
ENTRY(_start_dma_code)
/* Enable PHY CLK buffer output */
w[p0] = r0.l;
ssync;
- p0.l = LO(EBIU_SDBCTL);
- p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
- r0 = mem_SDBCTL;
- w[p0] = r0.l;
- ssync;
-
P2.H = hi(EBIU_SDGCTL);
P2.L = lo(EBIU_SDGCTL);
R0 = [P2];
RTS;
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-
-.data
-
-/*
- * Set up the usable of RAM stuff. Size of RAM is determined then
- * an initial stack set up at the end.
- */
-
-.align 4
-__rambase:
-.long 0
-__ramstart:
-.long 0
-__ramend:
-.long 0