#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb_isp1362.h>
#endif
-#include <asm/irq.h>
+#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/usb/sl811.h>
+#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
-#include <linux/usb_sl811.h>
-
+#include <asm/reboot.h>
#include <linux/spi/ad7877.h>
/*
* Name the Board for the /proc/cpuinfo
*/
-char *bfin_board_name = "ADDS-BF537-STAMP";
+const char bfin_board_name[] = "ADDS-BF537-STAMP";
/*
* Driver needs to know address, irq and flag pin.
int __init bfin_isp1761_init(void)
{
- unsigned int num_devices=ARRAY_SIZE(bfin_isp1761_devices);
+ unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
.start = 0x20310000, /* IO PORT */
.end = 0x20312000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF4,
.end = IRQ_PF4,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },{
+ }, {
.start = 6, /* Card Detect PF6 */
.end = 6,
.flags = IORESOURCE_IRQ,
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
};
#endif
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+ [0] = {
+ .start = 0x203FB800,
+ .end = 0x203FB800 + 8,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PF9,
+ .end = IRQ_PF9,
+ .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+ },
+};
+
+static struct platform_device dm9000_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+ .resource = dm9000_resources,
+};
+#endif
+
#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
static struct resource sl811_hcd_resources[] = {
{
.start = 0x20340000,
.end = 0x20340000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20340004,
.end = 0x20340004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = CONFIG_USB_SL811_BFIN_IRQ,
.end = CONFIG_USB_SL811_BFIN_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
void sl811_port_power(struct device *dev, int is_on)
{
- unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS);
-
- bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+ gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+ gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
if (is_on)
- bfin_write_FIO_FLAG_S(mask);
+ gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
else
- bfin_write_FIO_FLAG_C(mask);
+ gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
}
#endif
.start = 0x20360000,
.end = 0x20360000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20360004,
.end = 0x20360004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20300000,
.end = 0x20300000 + 0x100,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-// .cs_change_per_word = 1,
.enable_dma = 0,
.bits_per_word = 16,
};
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
{
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1, /* Framework bus number */
+ .bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. */
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
{
.modalias = "ad1836-spi",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
.controller_data = &ad1836_spi_chip_info,
},
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
#endif
#if defined(CONFIG_PBX)
{
- .modalias = "fxs-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 3,
- .controller_data= &spi_si3xxx_chip_info,
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J11_JUMPER,
+ .controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
- .modalias = "fxo-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 2,
- .controller_data= &spi_si3xxx_chip_info,
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J19_JUMPER,
+ .controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
#endif
{
.modalias = "ad5304_spi",
.max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
+ .bus_num = 0,
.chip_select = 2,
.platform_data = NULL,
.controller_data = &ad5304_chip_info,
};
/* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
.enable_dma = 1, /* master has the ability to do dma transfer */
};
-static struct platform_device spi_bfin_master_device = {
- .name = "bfin-spi-master",
- .id = 1, /* Bus number */
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
.dev = {
- .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
#endif /* spi master and devices */
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
static struct platform_device bfin_fb_device = {
- .name = "bf537-fb",
+ .name = "bf537-lq035",
+};
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+ .name = "bfin-adv7393",
};
#endif
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,
#endif
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+ [0] = {
+ .start = TWI0_REGBASE,
+ .end = TWI0_REGBASE,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TWI,
+ .end = IRQ_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct platform_device i2c_bfin_twi_device = {
.name = "i2c-bfin-twi",
.id = 0,
+ .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+ .resource = bfin_twi0_resource,
};
#endif
};
#endif
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT 55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 1,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x20314020,
+ .end = 0x2031403F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2031401C,
+ .end = 0x2031401F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
static struct platform_device *stamp_devices[] __initdata = {
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
&bfin_pcmcia_cf_device,
&smc91x_device,
#endif
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+ &dm9000_device,
+#endif
+
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mac_device,
#endif
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &spi_bfin_master_device,
+ &bfin_spi0_device,
#endif
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
&bfin_fb_device,
#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+ &bfin_fb_adv7393_device,
+#endif
+
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
&bfin_sport0_uart_device,
&bfin_sport1_uart_device,
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
+#endif
};
static int __init stamp_init(void)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
return 0;
}
arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+ /* workaround reboot hang when booting from SPI */
+ if ((bfin_read_SYSCR() & 0x7) == 0x3)
+ bfin_gpio_reset_spi0_ssel1();
+}