* GPIO_47 PH15 PF47
*/
+#include <linux/delay.h>
#include <linux/module.h>
#include <linux/err.h>
#include <asm/blackfin.h>
#include <asm/gpio.h>
+#include <asm/portmux.h>
#include <linux/irq.h>
#ifdef BF533_FAMILY
};
#endif
-static unsigned short reserved_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS + 16)];
+
+#define MAX_RESOURCES 256
+#define RESOURCE_LABEL_SIZE 16
+
+struct str_ident {
+ char name[RESOURCE_LABEL_SIZE];
+} *str_ident;
+
#ifdef CONFIG_PM
static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
return 0;
}
+static void set_label(unsigned short ident, const char *label)
+{
+
+ if (label && str_ident) {
+ strncpy(str_ident[ident].name, label,
+ RESOURCE_LABEL_SIZE);
+ str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
+ }
+}
+
+static char *get_label(unsigned short ident)
+{
+ if (!str_ident)
+ return "UNKNOWN";
+
+ return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN");
+}
+
+static int cmp_label(unsigned short ident, const char *label)
+{
+ if (label && str_ident)
+ return strncmp(str_ident[ident].name,
+ label, strlen(label));
+ else
+ return -EINVAL;
+}
+
#ifdef BF537_FAMILY
static void port_setup(unsigned short gpio, unsigned short usage)
{
- if (usage == GPIO_USAGE) {
- if (*port_fer[gpio_bank(gpio)] & gpio_bit(gpio))
- printk(KERN_WARNING "bfin-gpio: Possible Conflict with Peripheral "
- "usage and GPIO %d detected!\n", gpio);
- *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
- } else
- *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
- SSYNC();
+ if (!check_gpio(gpio)) {
+ if (usage == GPIO_USAGE) {
+ *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ } else
+ *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
+ SSYNC();
+ }
}
#else
# define port_setup(...) do { } while (0)
#endif
+#ifdef BF537_FAMILY
+
+static struct {
+ unsigned short res;
+ unsigned short offset;
+} port_mux_lut[] = {
+ {.res = P_PPI0_D13, .offset = 11},
+ {.res = P_PPI0_D14, .offset = 11},
+ {.res = P_PPI0_D15, .offset = 11},
+ {.res = P_SPORT1_TFS, .offset = 11},
+ {.res = P_SPORT1_TSCLK, .offset = 11},
+ {.res = P_SPORT1_DTPRI, .offset = 11},
+ {.res = P_PPI0_D10, .offset = 10},
+ {.res = P_PPI0_D11, .offset = 10},
+ {.res = P_PPI0_D12, .offset = 10},
+ {.res = P_SPORT1_RSCLK, .offset = 10},
+ {.res = P_SPORT1_RFS, .offset = 10},
+ {.res = P_SPORT1_DRPRI, .offset = 10},
+ {.res = P_PPI0_D8, .offset = 9},
+ {.res = P_PPI0_D9, .offset = 9},
+ {.res = P_SPORT1_DRSEC, .offset = 9},
+ {.res = P_SPORT1_DTSEC, .offset = 9},
+ {.res = P_TMR2, .offset = 8},
+ {.res = P_PPI0_FS3, .offset = 8},
+ {.res = P_TMR3, .offset = 7},
+ {.res = P_SPI0_SSEL4, .offset = 7},
+ {.res = P_TMR4, .offset = 6},
+ {.res = P_SPI0_SSEL5, .offset = 6},
+ {.res = P_TMR5, .offset = 5},
+ {.res = P_SPI0_SSEL6, .offset = 5},
+ {.res = P_UART1_RX, .offset = 4},
+ {.res = P_UART1_TX, .offset = 4},
+ {.res = P_TMR6, .offset = 4},
+ {.res = P_TMR7, .offset = 4},
+ {.res = P_UART0_RX, .offset = 3},
+ {.res = P_UART0_TX, .offset = 3},
+ {.res = P_DMAR0, .offset = 3},
+ {.res = P_DMAR1, .offset = 3},
+ {.res = P_SPORT0_DTSEC, .offset = 1},
+ {.res = P_SPORT0_DRSEC, .offset = 1},
+ {.res = P_CAN0_RX, .offset = 1},
+ {.res = P_CAN0_TX, .offset = 1},
+ {.res = P_SPI0_SSEL7, .offset = 1},
+ {.res = P_SPORT0_TFS, .offset = 0},
+ {.res = P_SPORT0_DTPRI, .offset = 0},
+ {.res = P_SPI0_SSEL2, .offset = 0},
+ {.res = P_SPI0_SSEL3, .offset = 0},
+};
+
+static void portmux_setup(unsigned short per, unsigned short function)
+{
+ u16 y, offset, muxreg;
+
+ for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) {
+ if (port_mux_lut[y].res == per) {
+
+ /* SET PORTMUX REG */
+
+ offset = port_mux_lut[y].offset;
+ muxreg = bfin_read_PORT_MUX();
+
+ if (offset != 1) {
+ muxreg &= ~(1 << offset);
+ } else {
+ muxreg &= ~(3 << 1);
+ }
+
+ muxreg |= (function << offset);
+ bfin_write_PORT_MUX(muxreg);
+ }
+ }
+}
+
+#else
+# define portmux_setup(...) do { } while (0)
+#endif
static void default_gpio(unsigned short gpio)
{
static int __init bfin_gpio_init(void)
{
- int i;
-
- printk(KERN_INFO "Blackfin GPIO Controller\n");
+ str_ident = kcalloc(MAX_RESOURCES,
+ sizeof(struct str_ident), GFP_KERNEL);
+ if (str_ident == NULL)
+ return -ENOMEM;
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE)
- reserved_map[gpio_bank(i)] = 0;
+ memset(str_ident, 0, MAX_RESOURCES * sizeof(struct str_ident));
-#if defined(BF537_FAMILY) && (defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
-# if defined(CONFIG_BFIN_MAC_RMII)
- reserved_map[gpio_bank(PORT_H)] = 0xC373;
-# else
- reserved_map[gpio_bank(PORT_H)] = 0xFFFF;
-# endif
-#endif
+ printk(KERN_INFO "Blackfin GPIO Controller\n");
return 0;
-}
+}
arch_initcall(bfin_gpio_init);
void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
{ \
unsigned long flags; \
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
local_irq_save(flags); \
if (arg) \
gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
#define SET_GPIO_SC(name) \
void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
{ \
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
if (arg) \
gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
else \
SET_GPIO_SC(maska)
SET_GPIO_SC(maskb)
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311
void set_gpio_data(unsigned short gpio, unsigned short arg)
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
if (arg)
gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
#endif
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311
void set_gpio_toggle(unsigned short gpio)
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
bfin_read_CHIPID();
#else
void set_gpio_toggle(unsigned short gpio)
{
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
}
#endif
SET_GPIO_P(maskb)
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311
void set_gpiop_data(unsigned short gpio, unsigned short arg)
{
unsigned long flags;
GET_GPIO(maskb)
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311
unsigned short get_gpio_data(unsigned short gpio)
{
unsigned long flags;
unsigned short ret;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->data >> gpio_sub_n(gpio));
bfin_read_CHIPID();
GET_GPIO_P(maska)
GET_GPIO_P(maskb)
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311
unsigned short get_gpiop_data(unsigned short gpio)
{
unsigned long flags;
gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir;
gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge;
gpio_bank_saved[bank].both = gpio_bankb[bank]->both;
- gpio_bank_saved[bank].reserved = reserved_map[bank];
+ gpio_bank_saved[bank].reserved =
+ reserved_gpio_map[bank];
gpio = i;
while (mask) {
if (mask & 1) {
- reserved_map[gpio_bank(gpio)] |=
+ reserved_gpio_map[gpio_bank(gpio)] |=
gpio_bit(gpio);
bfin_gpio_wakeup_type(gpio,
wakeup_flags_map[gpio]);
gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge;
gpio_bankb[bank]->both = gpio_bank_saved[bank].both;
- reserved_map[bank] = gpio_bank_saved[bank].reserved;
+ reserved_gpio_map[bank] =
+ gpio_bank_saved[bank].reserved;
}
#endif
+
+
+
+int peripheral_request(unsigned short per, const char *label)
+{
+ unsigned long flags;
+ unsigned short ident = P_IDENT(per);
+
+ /*
+ * Don't cares are pins with only one dedicated function
+ */
+
+ if (per & P_DONTCARE)
+ return 0;
+
+ if (!(per & P_DEFINED))
+ return -ENODEV;
+
+ local_irq_save(flags);
+
+ if (!check_gpio(ident)) {
+
+ if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
+ printk(KERN_ERR
+ "%s: Peripheral %d is already reserved as GPIO by %s !\n",
+ __FUNCTION__, ident, get_label(ident));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ }
+
+ if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) {
+
+ /*
+ * Pin functions like AMC address strobes my
+ * be requested and used by several drivers
+ */
+
+ if (!(per & P_MAYSHARE)) {
+
+ /*
+ * Allow that the identical pin function can
+ * be requested from the same driver twice
+ */
+
+ if (cmp_label(ident, label) == 0)
+ goto anyway;
+
+ printk(KERN_ERR
+ "%s: Peripheral %d function %d is already"
+ " reserved by %s !\n",
+ __FUNCTION__, ident, P_FUNCT2MUX(per),
+ get_label(ident));
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ }
+
+anyway:
+
+
+ portmux_setup(per, P_FUNCT2MUX(per));
+
+ port_setup(ident, PERIPHERAL_USAGE);
+
+ reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
+ local_irq_restore(flags);
+ set_label(ident, label);
+
+ return 0;
+}
+EXPORT_SYMBOL(peripheral_request);
+
+int peripheral_request_list(unsigned short per[], const char *label)
+{
+ u16 cnt;
+ int ret;
+
+ for (cnt = 0; per[cnt] != 0; cnt++) {
+
+ ret = peripheral_request(per[cnt], label);
+
+ if (ret < 0) {
+ for ( ; cnt > 0; cnt--) {
+ peripheral_free(per[cnt - 1]);
+ }
+ return ret;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(peripheral_request_list);
+
+void peripheral_free(unsigned short per)
+{
+ unsigned long flags;
+ unsigned short ident = P_IDENT(per);
+
+ if (per & P_DONTCARE)
+ return;
+
+ if (!(per & P_DEFINED))
+ return;
+
+ if (check_gpio(ident) < 0)
+ return;
+
+ local_irq_save(flags);
+
+ if (unlikely(!(reserved_peri_map[gpio_bank(ident)]
+ & gpio_bit(ident)))) {
+ local_irq_restore(flags);
+ return;
+ }
+
+ if (!(per & P_MAYSHARE)) {
+ port_setup(ident, GPIO_USAGE);
+ }
+
+ reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident);
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(peripheral_free);
+
+void peripheral_free_list(unsigned short per[])
+{
+ u16 cnt;
+
+ for (cnt = 0; per[cnt] != 0; cnt++) {
+ peripheral_free(per[cnt]);
+ }
+
+}
+EXPORT_SYMBOL(peripheral_free_list);
+
/***********************************************************
*
* FUNCTIONS: Blackfin GPIO Driver
local_irq_save(flags);
- if (unlikely(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
dump_stack();
local_irq_restore(flags);
return -EBUSY;
}
- reserved_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+ reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
local_irq_restore(flags);
local_irq_save(flags);
- if (unlikely(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+ if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio);
dump_stack();
local_irq_restore(flags);
default_gpio(gpio);
- reserved_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
local_irq_restore(flags);
}
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
{
unsigned long flags;
- BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
local_irq_save(flags);
gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_direction_output);
+
+/* If we are booting from SPI and our board lacks a strong enough pull up,
+ * the core can reset and execute the bootrom faster than the resistor can
+ * pull the signal logically high. To work around this (common) error in
+ * board design, we explicitly set the pin back to GPIO mode, force /CS
+ * high, and wait for the electrons to do their thing.
+ *
+ * This function only makes sense to be called from reset code, but it
+ * lives here as we need to force all the GPIO states w/out going through
+ * BUG() checks and such.
+ */
+void bfin_gpio_reset_spi0_ssel1(void)
+{
+ u16 gpio = P_IDENT(P_SPI0_SSEL1);
+
+ port_setup(gpio, GPIO_USAGE);
+ gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+ udelay(1);
+}
projects / linux-2.6 / blobdiff