[ARM] nommu: Initial uCLinux support for MMU-based CPUs

[linux-2.6] / arch / arm / mm / proc-arm920.S

diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 950d3b664c1ea57eb869657e9b8d9f9761266116..31dc839ba07c9557ff0dae53de0827b345e870cd 100644 (file)
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 1999,2000 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  hacked for non-paged-MM by Hyok S. Choi, 2003.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,6 +29,7 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
+#include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/procinfo.h>
 #include <asm/page.h>
@@ -96,7 +98,9 @@ ENTRY(cpu_arm920_reset)
        mov     ip, #0
        mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+#ifdef CONFIG_MMU
        mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
        mrc     p15, 0, ip, c1, c0, 0           @ ctrl register
        bic     ip, ip, #0x000f                 @ ............wcam
        bic     ip, ip, #0x1100                 @ ...i...s........
@@ -316,6 +320,7 @@ ENTRY(cpu_arm920_dcache_clean_area)
  */
        .align  5
 ENTRY(cpu_arm920_switch_mm)
+#ifdef CONFIG_MMU
        mov     ip, #0
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
        mcr     p15, 0, ip, c7, c6, 0           @ invalidate D cache
@@ -336,6 +341,7 @@ ENTRY(cpu_arm920_switch_mm)
        mcr     p15, 0, ip, c7, c10, 4          @ drain WB
        mcr     p15, 0, r0, c2, c0, 0           @ load page table pointer
        mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
        mov     pc, lr
 
 /*
@@ -345,6 +351,7 @@ ENTRY(cpu_arm920_switch_mm)
  */
        .align  5
 ENTRY(cpu_arm920_set_pte)
+#ifdef CONFIG_MMU
        str     r1, [r0], #-2048                @ linux version
 
        eor     r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -371,6 +378,7 @@ ENTRY(cpu_arm920_set_pte)
        mov     r0, r0
        mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
        mcr     p15, 0, r0, c7, c10, 4          @ drain WB
+#endif /* CONFIG_MMU */
        mov     pc, lr
 
        __INIT
@@ -380,7 +388,9 @@ __arm920_setup:
        mov     r0, #0
        mcr     p15, 0, r0, c7, c7              @ invalidate I,D caches on v4
        mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer on v4
+#ifdef CONFIG_MMU
        mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
+#endif
        mrc     p15, 0, r0, c1, c0              @ get control register v4
        ldr     r5, arm920_cr1_clear
        bic     r0, r0, r5