#include <linux/init.h>
#include <linux/tty.h>
#include <linux/console.h>
+#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/regs-serial.h>
+#include <asm/plat-s3c/regs-serial.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-lcd.h>
#include <asm/arch/h1940.h>
-#include <asm/arch/nand.h>
+#include <asm/plat-s3c/nand.h>
#include <asm/arch/fb.h>
#include <asm/plat-s3c24xx/clock.h>
/* framebuffer lcd controller information */
-static struct s3c2410fb_mach_info rx3715_lcdcfg __initdata = {
- .regs = {
- .lcdcon1 = S3C2410_LCDCON1_TFT16BPP | \
- S3C2410_LCDCON1_TFT | \
- S3C2410_LCDCON1_CLKVAL(0x0C),
-
- .lcdcon2 = S3C2410_LCDCON2_VBPD(5) | \
- S3C2410_LCDCON2_LINEVAL(319) | \
- S3C2410_LCDCON2_VFPD(6) | \
- S3C2410_LCDCON2_VSPW(2),
-
- .lcdcon3 = S3C2410_LCDCON3_HBPD(35) | \
- S3C2410_LCDCON3_HOZVAL(239) | \
- S3C2410_LCDCON3_HFPD(35),
+static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
+ .lcdcon5 = S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 240,
+ .height = 320,
+
+ .pixclock = 260000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .left_margin = 36,
+ .right_margin = 36,
+ .hsync_len = 8,
+ .upper_margin = 6,
+ .lower_margin = 7,
+ .vsync_len = 3,
+};
- .lcdcon4 = S3C2410_LCDCON4_MVAL(0) | \
- S3C2410_LCDCON4_HSPW(7),
+static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
- .lcdcon5 = S3C2410_LCDCON5_INVVLINE |
- S3C2410_LCDCON5_FRM565 |
- S3C2410_LCDCON5_HWSWP,
- },
+ .displays = &rx3715_lcdcfg,
+ .num_displays = 1,
+ .default_display = 0,
.lpcsel = 0xf82,
.gpdcon_mask = 0xffc0fff0,
.gpdup = 0x0000faff,
.gpdup_mask = 0xffffffff,
-
- .fixed_syncs = 1,
- .width = 240,
- .height = 320,
-
- .xres = {
- .min = 240,
- .max = 240,
- .defval = 240,
- },
-
- .yres = {
- .max = 320,
- .min = 320,
- .defval = 320,
- },
-
- .bpp = {
- .min = 16,
- .max = 16,
- .defval = 16,
- },
};
static struct mtd_partition rx3715_nand_part[] = {
&s3c_device_nand,
};
-static struct s3c24xx_board rx3715_board __initdata = {
- .devices = rx3715_devices,
- .devices_count = ARRAY_SIZE(rx3715_devices)
-};
-
static void __init rx3715_map_io(void)
{
s3c_device_nand.dev.platform_data = &rx3715_nand_info;
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
- s3c24xx_set_board(&rx3715_board);
}
static void __init rx3715_init_irq(void)
static void __init rx3715_init_machine(void)
{
+#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+#endif
s3c2410_pm_init();
- s3c24xx_fb_set_platdata(&rx3715_lcdcfg);
+ s3c24xx_fb_set_platdata(&rx3715_fb_info);
+ platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
}
-
MACHINE_START(RX3715, "IPAQ-RX3715")
/* Maintainer: Ben Dooks <ben@fluff.org> */
.phys_io = S3C2410_PA_UART,