#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <asm/arch/regs-serial.h>
+#include <asm/plat-s3c/regs-serial.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/leds-gpio.h>
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
- &s3c_device_iis,
&s3c_device_adc,
&serial_device,
&vr1000_nor,
&s3c24xx_uclk,
};
-static struct s3c24xx_board vr1000_board __initdata = {
- .devices = vr1000_devices,
- .devices_count = ARRAY_SIZE(vr1000_devices),
- .clocks = vr1000_clocks,
- .clocks_count = ARRAY_SIZE(vr1000_clocks),
-};
-
static void vr1000_power_off(void)
{
s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP);
{
/* initialise clock sources */
- s3c24xx_dclk0.parent = NULL;
+ s3c24xx_dclk0.parent = &clk_upll;
s3c24xx_dclk0.rate = 12*1000*1000;
s3c24xx_dclk1.parent = NULL;
s3c24xx_uclk.parent = &s3c24xx_clkout1;
+ s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks));
+
pm_power_off = vr1000_power_off;
s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
- s3c24xx_set_board(&vr1000_board);
- usb_simtec_init();
}
+static void __init vr1000_init(void)
+{
+ platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
+}
MACHINE_START(VR1000, "Thorcom-VR1000")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = vr1000_map_io,
+ .init_machine = vr1000_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
MACHINE_END