#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/hardware/amba.h>
+#include <asm/hardware/arm_timer.h>
#include <asm/arch/cm.h>
#include <asm/system.h>
#include <asm/leds.h>
#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
#endif
-/*
- * What does it look like?
- */
-typedef struct TimerStruct {
- unsigned long TimerLoad;
- unsigned long TimerValue;
- unsigned long TimerControl;
- unsigned long TimerClear;
-} TimerStruct_t;
-
static unsigned long timer_reload;
/*
*/
unsigned long integrator_gettimeoffset(void)
{
- volatile TimerStruct_t *timer1 = (TimerStruct_t *)TIMER1_VA_BASE;
unsigned long ticks1, ticks2, status;
/*
* an interrupt. We get around this by ensuring that the
* counter has not reloaded between our two reads.
*/
- ticks2 = timer1->TimerValue & 0xffff;
+ ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
do {
ticks1 = ticks2;
status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS);
- ticks2 = timer1->TimerValue & 0xffff;
+ ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
} while (ticks2 > ticks1);
/*
static irqreturn_t
integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
- volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
-
write_seqlock(&xtime_lock);
/*
* clear the interrupt
*/
- timer1->TimerClear = 1;
+ writel(1, TIMER1_VA_BASE + TIMER_INTCLR);
- timer_tick(regs);
+ /*
+ * the clock tick routines are only processed on the
+ * primary CPU
+ */
+ if (hard_smp_processor_id() == 0) {
+ timer_tick(regs);
+#ifdef CONFIG_SMP
+ smp_send_timer();
+#endif
+ }
+
+#ifdef CONFIG_SMP
+ /*
+ * this is the ARM equivalent of the APIC timer interrupt
+ */
+ update_process_times(user_mode(regs));
+#endif /* CONFIG_SMP */
write_sequnlock(&xtime_lock);
static struct irqaction integrator_timer_irq = {
.name = "Integrator Timer Tick",
- .flags = SA_INTERRUPT,
- .handler = integrator_timer_interrupt
+ .flags = SA_INTERRUPT | SA_TIMER,
+ .handler = integrator_timer_interrupt,
};
/*
*/
void __init integrator_time_init(unsigned long reload, unsigned int ctrl)
{
- volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
- volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
- volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE;
- unsigned int timer_ctrl = 0x80 | 0x40; /* periodic */
+ unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
timer_reload = reload;
timer_ctrl |= ctrl;
if (timer_reload > 0x100000) {
timer_reload >>= 8;
- timer_ctrl |= 0x08; /* /256 */
+ timer_ctrl |= TIMER_CTRL_DIV256;
} else if (timer_reload > 0x010000) {
timer_reload >>= 4;
- timer_ctrl |= 0x04; /* /16 */
+ timer_ctrl |= TIMER_CTRL_DIV16;
}
/*
* Initialise to a known state (all timers off)
*/
- timer0->TimerControl = 0;
- timer1->TimerControl = 0;
- timer2->TimerControl = 0;
+ writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER2_VA_BASE + TIMER_CTRL);
- timer1->TimerLoad = timer_reload;
- timer1->TimerValue = timer_reload;
- timer1->TimerControl = timer_ctrl;
+ writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD);
+ writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE);
+ writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL);
/*
* Make irqs happen for the system timer