strict -- Be less tolerant of platforms that are not
strictly ACPI specification compliant.
- See also Documentation/pm.txt, pci=noacpi
+ See also Documentation/power/pm.txt, pci=noacpi
acpi_apic_instance= [ACPI, IOAPIC]
Format: <int>
default: 0
acpi_sleep= [HW,ACPI] Sleep options
- Format: { s3_bios, s3_mode }
- See Documentation/power/video.txt
+ Format: { s3_bios, s3_mode, s3_beep }
+ See Documentation/power/video.txt for s3_bios and s3_mode.
+ s3_beep is for debugging; it makes the PC's speaker beep
+ as soon as the kernel's real-mode entry point is called.
acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
Format: { level | edge | high | low }
acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA
Format: <irq>,<irq>...
+ acpi_new_pts_ordering [HW,ACPI]
+ Enforce the ACPI 2.0 ordering of the _PTS control
+ method wrt putting devices into low power states
+ default: pre ACPI 2.0 ordering of _PTS
+
acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT
+ acpi_no_initrd_override [KNL,ACPI]
+ Disable loading custom ACPI tables from the initramfs
+
acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS
Format: To spoof as Windows 98: ="Microsoft Windows"
1 will print _a lot_ more information - normally
only useful to kernel developers.
- decnet= [HW,NET]
+ decnet.addr= [HW,NET]
Format: <area>[,<node>]
See also Documentation/networking/decnet.txt.
Format: <cyl>,<head>,<sect>
hd?= [HW] (E)IDE subsystem
- hd?lun= See Documentation/ide.txt.
+ hd?lun= See Documentation/ide/ide.txt.
highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
size of <nn>. This works even on boxes that have no
See Documentation/isdn/README.HiSax.
hugepages= [HW,X86-32,IA-64] Maximal number of HugeTLB pages.
+ hugepagesz= [HW,IA-64,PPC] The size of the HugeTLB pages.
i8042.direct [HW] Put keyboard port into non-translated mode
i8042.dumbkbd [HW] Pretend that controller can only read data from
ide= [HW] (E)IDE subsystem
Format: ide=nodma or ide=doubler or ide=reverse
- See Documentation/ide.txt.
+ See Documentation/ide/ide.txt.
ide?= [HW] (E)IDE subsystem
Format: ide?=noprobe or chipset specific parameters.
- See Documentation/ide.txt.
+ See Documentation/ide/ide.txt.
idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed
- See Documentation/ide.txt.
+ See Documentation/ide/ide.txt.
idle= [X86]
Format: idle=poll or idle=mwait
loop use the MONITOR/MWAIT idle loop anyways. Performance should be the same
as idle=poll.
+ ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
+ Claim all unknown PCI IDE storage controllers.
+
ignore_loglevel [KNL]
Ignore loglevel setting - this will print /all/
kernel messages to the console. Useful for debugging.
when set.
Format: <int>
+ libata.force= [LIBATA] Force configurations. The format is comma
+ separated list of "[ID:]VAL" where ID is
+ PORT[:DEVICE]. PORT and DEVICE are decimal numbers
+ matching port, link or device. Basically, it matches
+ the ATA ID string printed on console by libata. If
+ the whole ID part is omitted, the last PORT and DEVICE
+ values are used. If ID hasn't been specified yet, the
+ configuration applies to all ports, links and devices.
+
+ If only DEVICE is omitted, the parameter applies to
+ the port and all links and devices behind it. DEVICE
+ number of 0 either selects the first device or the
+ first fan-out link behind PMP device. It does not
+ select the host link. DEVICE number of 15 selects the
+ host link and device attached to it.
+
+ The VAL specifies the configuration to force. As long
+ as there's no ambiguity shortcut notation is allowed.
+ For example, both 1.5 and 1.5G would work for 1.5Gbps.
+ The following configurations can be forced.
+
+ * Cable type: 40c, 80c, short40c, unk, ign or sata.
+ Any ID with matching PORT is used.
+
+ * SATA link speed limit: 1.5Gbps or 3.0Gbps.
+
+ * Transfer mode: pio[0-7], mwdma[0-4] and udma[0-7].
+ udma[/][16,25,33,44,66,100,133] notation is also
+ allowed.
+
+ * [no]ncq: Turn on or off NCQ.
+
+ If there are multiple matching configurations changing
+ the same attribute, the last one is used.
+
load_ramdisk= [RAM] List of ramdisks to load from floppy
See Documentation/ramdisk.txt.
[SCSI] Maximum number of LUNs received.
Should be between 1 and 16384.
- mca-pentium [BUGS=X86-32]
-
mcatest= [IA-64]
mce [X86-32] Machine Check Exception
Multi-Function General Purpose Timers on AMD Geode
platforms.
+ mfgptfix [X86-32] Fix MFGPT timers on AMD Geode platforms when
+ the BIOS has incorrectly applied a workaround. TinyBIOS
+ version 0.98 is known to be affected, 0.99 fixes the
+ problem by letting the user disable the workaround.
+
mga= [HW,DRM]
mousedev.tap_time=
ramdisk_size= [RAM] Sizes of RAM disks in kilobytes
See Documentation/ramdisk.txt.
- rcu.blimit= [KNL,BOOT] Set maximum number of finished
- RCU callbacks to process in one batch.
+ rcupdate.blimit= [KNL,BOOT]
+ Set maximum number of finished RCU callbacks to process
+ in one batch.
- rcu.qhimark= [KNL,BOOT] Set threshold of queued
+ rcupdate.qhimark= [KNL,BOOT]
+ Set threshold of queued
RCU callbacks over which batch limiting is disabled.
- rcu.qlowmark= [KNL,BOOT] Set threshold of queued
- RCU callbacks below which batch limiting is re-enabled.
+ rcupdate.qlowmark= [KNL,BOOT]
+ Set threshold of queued RCU callbacks below which
+ batch limiting is re-enabled.
rdinit= [KNL]
Format: <full_path>
st= [HW,SCSI] SCSI tape parameters (buffers, etc.)
See Documentation/scsi/st.txt.
- st0x= [HW,SCSI]
- See header of drivers/scsi/seagate.c.
-
sti= [PARISC,HW]
Format: <num>
Set the STI (builtin display/keyboard on the HP-PARISC
<deci-seconds>: poll all this frequency
0: no polling (default)
- time Show timing data prefixed to each printk message line
- [deprecated, see 'printk.time']
-
tipar.timeout= [HW,PPT]
Set communications timeout in tenths of a second
(default 15).
tipar.delay= [HW,PPT]
Set inter-bit delay in microseconds (default 10).
- tmc8xx= [HW,SCSI]
- See header of drivers/scsi/seagate.c.
-
tmscsim= [HW,SCSI]
See comment before function dc390_setup() in
drivers/scsi/tmscsim.c.