-static int ieee80211_sta_join_ibss(struct net_device *dev,
- struct ieee80211_if_sta *ifsta,
- struct ieee80211_sta_bss *bss)
-{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- int res, rates, i, j;
- struct sk_buff *skb;
- struct ieee80211_mgmt *mgmt;
- struct ieee80211_tx_control control;
- struct ieee80211_hw_mode *mode;
- struct rate_selection ratesel;
- u8 *pos;
- struct ieee80211_sub_if_data *sdata;
-
- /* Remove possible STA entries from other IBSS networks. */
- sta_info_flush(local, NULL);
-
- if (local->ops->reset_tsf) {
- /* Reset own TSF to allow time synchronization work. */
- local->ops->reset_tsf(local_to_hw(local));
- }
- memcpy(ifsta->bssid, bss->bssid, ETH_ALEN);
- res = ieee80211_if_config(dev);
- if (res)
- return res;
-
- local->hw.conf.beacon_int = bss->beacon_int >= 10 ? bss->beacon_int : 10;
-
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- sdata->drop_unencrypted = bss->capability &
- WLAN_CAPABILITY_PRIVACY ? 1 : 0;
-
- res = ieee80211_set_channel(local, -1, bss->freq);
-
- if (!(local->oper_channel->flag & IEEE80211_CHAN_W_IBSS)) {
- printk(KERN_DEBUG "%s: IBSS not allowed on channel %d "
- "(%d MHz)\n", dev->name, local->hw.conf.channel,
- local->hw.conf.freq);
- return -1;
- }
-
- /* Set beacon template based on scan results */
- skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
- do {
- if (!skb)
- break;
-
- skb_reserve(skb, local->hw.extra_tx_headroom);
-
- mgmt = (struct ieee80211_mgmt *)
- skb_put(skb, 24 + sizeof(mgmt->u.beacon));
- memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon));
- mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_BEACON);
- memset(mgmt->da, 0xff, ETH_ALEN);
- memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
- memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
- mgmt->u.beacon.beacon_int =
- cpu_to_le16(local->hw.conf.beacon_int);
- mgmt->u.beacon.capab_info = cpu_to_le16(bss->capability);
-
- pos = skb_put(skb, 2 + ifsta->ssid_len);
- *pos++ = WLAN_EID_SSID;
- *pos++ = ifsta->ssid_len;
- memcpy(pos, ifsta->ssid, ifsta->ssid_len);
-
- rates = bss->supp_rates_len;
- if (rates > 8)
- rates = 8;
- pos = skb_put(skb, 2 + rates);
- *pos++ = WLAN_EID_SUPP_RATES;
- *pos++ = rates;
- memcpy(pos, bss->supp_rates, rates);
-
- pos = skb_put(skb, 2 + 1);
- *pos++ = WLAN_EID_DS_PARAMS;
- *pos++ = 1;
- *pos++ = bss->channel;
-
- pos = skb_put(skb, 2 + 2);
- *pos++ = WLAN_EID_IBSS_PARAMS;
- *pos++ = 2;
- /* FIX: set ATIM window based on scan results */
- *pos++ = 0;
- *pos++ = 0;
-
- if (bss->supp_rates_len > 8) {
- rates = bss->supp_rates_len - 8;
- pos = skb_put(skb, 2 + rates);
- *pos++ = WLAN_EID_EXT_SUPP_RATES;
- *pos++ = rates;
- memcpy(pos, &bss->supp_rates[8], rates);
- }
-
- memset(&control, 0, sizeof(control));
- rate_control_get_rate(dev, local->oper_hw_mode, skb, &ratesel);
- if (!ratesel.rate) {
- printk(KERN_DEBUG "%s: Failed to determine TX rate "
- "for IBSS beacon\n", dev->name);
- break;
- }
- control.vif = &sdata->vif;
- control.tx_rate =
- (sdata->bss_conf.use_short_preamble &&
- (ratesel.rate->flags & IEEE80211_RATE_PREAMBLE2)) ?
- ratesel.rate->val2 : ratesel.rate->val;
- control.antenna_sel_tx = local->hw.conf.antenna_sel_tx;
- control.power_level = local->hw.conf.power_level;
- control.flags |= IEEE80211_TXCTL_NO_ACK;
- control.retry_limit = 1;
-
- ifsta->probe_resp = skb_copy(skb, GFP_ATOMIC);
- if (ifsta->probe_resp) {
- mgmt = (struct ieee80211_mgmt *)
- ifsta->probe_resp->data;
- mgmt->frame_control =
- IEEE80211_FC(IEEE80211_FTYPE_MGMT,
- IEEE80211_STYPE_PROBE_RESP);
- } else {
- printk(KERN_DEBUG "%s: Could not allocate ProbeResp "
- "template for IBSS\n", dev->name);
- }
-
- if (local->ops->beacon_update &&
- local->ops->beacon_update(local_to_hw(local),
- skb, &control) == 0) {
- printk(KERN_DEBUG "%s: Configured IBSS beacon "
- "template based on scan results\n", dev->name);
- skb = NULL;
- }
-
- rates = 0;
- mode = local->oper_hw_mode;
- for (i = 0; i < bss->supp_rates_len; i++) {
- int bitrate = (bss->supp_rates[i] & 0x7f) * 5;
- for (j = 0; j < mode->num_rates; j++)
- if (mode->rates[j].rate == bitrate)
- rates |= BIT(j);
- }
- ifsta->supp_rates_bits = rates;
- } while (0);
-
- if (skb) {
- printk(KERN_DEBUG "%s: Failed to configure IBSS beacon "
- "template\n", dev->name);
- dev_kfree_skb(skb);
- }
-
- ifsta->state = IEEE80211_IBSS_JOINED;
- mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
-
- ieee80211_rx_bss_put(dev, bss);
-
- return res;
-}
-