-#ifdef CONFIG_SERIAL_AU1X00
-#include <asm/mach-au1x00/au1000.h>
-#ifdef CONFIG_SOC_AU1000
-#define AU1000_SERIAL_PORT_DEFNS \
- { .baud_base = 0, .port = UART0_ADDR, \
- .iomem_base = (unsigned char *)UART0_ADDR, \
- .irq = AU1000_UART0_INT, .flags = STD_COM_FLAGS, \
- .iomem_reg_shift = 2 }, \
- { .baud_base = 0, .port = UART1_ADDR, \
- .iomem_base = (unsigned char *)UART1_ADDR, \
- .irq = AU1000_UART1_INT, .flags = STD_COM_FLAGS, \
- .iomem_reg_shift = 2 }, \
- { .baud_base = 0, .port = UART2_ADDR, \
- .iomem_base = (unsigned char *)UART2_ADDR, \
- .irq = AU1000_UART2_INT, .flags = STD_COM_FLAGS, \
- .iomem_reg_shift = 2 }, \
- { .baud_base = 0, .port = UART3_ADDR, \
- .iomem_base = (unsigned char *)UART3_ADDR, \
- .irq = AU1000_UART3_INT, .flags = STD_COM_FLAGS, \
- .iomem_reg_shift = 2 },
-#endif
-
-#ifdef CONFIG_SOC_AU1500
-#define AU1000_SERIAL_PORT_DEFNS \
- { .baud_base = 0, .port = UART0_ADDR, \
- .iomem_base = (unsigned char *)UART0_ADDR, \
- .irq = AU1500_UART0_INT, .flags = STD_COM_FLAGS, \
- .iomem_reg_shift = 2 }, \
- { .baud_base = 0, .port = UART3_ADDR, \
- .iomem_base = (unsigned char *)UART3_ADDR, \
- .irq = AU1500_UART3_INT, .flags = STD_COM_FLAGS, \
- .iomem_reg_shift = 2 },
-#endif
-
-#ifdef CONFIG_SOC_AU1100
-#define AU1000_SERIAL_PORT_DEFNS \
- { .baud_base = 0, .port = UART0_ADDR, \
- .iomem_base = (unsigned char *)UART0_ADDR, \
- .irq = AU1100_UART0_INT, .flags = STD_COM_FLAGS, \
- .iomem_reg_shift = 2 }, \
- { .baud_base = 0, .port = UART1_ADDR, \
- .iomem_base = (unsigned char *)UART1_ADDR, \
- .irq = AU1100_UART1_INT, .flags = STD_COM_FLAGS, \
- .iomem_reg_shift = 2 }, \
- { .baud_base = 0, .port = UART3_ADDR, \
- .iomem_base = (unsigned char *)UART3_ADDR, \
- .irq = AU1100_UART3_INT, .flags = STD_COM_FLAGS, \
- .iomem_reg_shift = 2 },
-#endif
-
-#ifdef CONFIG_SOC_AU1550
-#define AU1000_SERIAL_PORT_DEFNS \
- { .baud_base = 0, .port = UART0_ADDR, \
- .iomem_base = (unsigned char *)UART0_ADDR, \
- .irq = AU1550_UART0_INT, .flags = STD_COM_FLAGS, \
- .iomem_reg_shift = 2 }, \
- { .baud_base = 0, .port = UART1_ADDR, \
- .iomem_base = (unsigned char *)UART1_ADDR, \
- .irq = AU1550_UART1_INT, .flags = STD_COM_FLAGS, \
- .iomem_reg_shift = 2 }, \
- { .baud_base = 0, .port = UART3_ADDR, \
- .iomem_base = (unsigned char *)UART3_ADDR, \
- .irq = AU1550_UART3_INT, .flags = STD_COM_FLAGS,\
- .iomem_reg_shift = 2 },
-#endif
-
-#ifdef CONFIG_SOC_AU1200
-#define AU1000_SERIAL_PORT_DEFNS \
- { .baud_base = 0, .port = UART0_ADDR, \
- .iomem_base = (unsigned char *)UART0_ADDR, \
- .irq = AU1200_UART0_INT, .flags = STD_COM_FLAGS, \
- .iomem_reg_shift = 2 }, \
- { .baud_base = 0, .port = UART1_ADDR, \
- .iomem_base = (unsigned char *)UART1_ADDR, \
- .irq = AU1200_UART1_INT, .flags = STD_COM_FLAGS, \
- .iomem_reg_shift = 2 },
-#endif
-
-#else
-#define AU1000_SERIAL_PORT_DEFNS
-#endif
-