+/************************** OS Utility Wrappers *******************************/
+void ahd_delay(long);
+void
+ahd_delay(long usec)
+{
+ /*
+ * udelay on Linux can have problems for
+ * multi-millisecond waits. Wait at most
+ * 1024us per call.
+ */
+ while (usec > 0) {
+ udelay(usec % 1024);
+ usec -= 1024;
+ }
+}
+
+
+/***************************** Low Level I/O **********************************/
+uint8_t ahd_inb(struct ahd_softc * ahd, long port);
+void ahd_outb(struct ahd_softc * ahd, long port, uint8_t val);
+void ahd_outw_atomic(struct ahd_softc * ahd,
+ long port, uint16_t val);
+void ahd_outsb(struct ahd_softc * ahd, long port,
+ uint8_t *, int count);
+void ahd_insb(struct ahd_softc * ahd, long port,
+ uint8_t *, int count);
+
+uint8_t
+ahd_inb(struct ahd_softc * ahd, long port)
+{
+ uint8_t x;
+
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ x = readb(ahd->bshs[0].maddr + port);
+ } else {
+ x = inb(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
+ }
+ mb();
+ return (x);
+}
+
+#if 0 /* unused */
+static uint16_t
+ahd_inw_atomic(struct ahd_softc * ahd, long port)
+{
+ uint8_t x;
+
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ x = readw(ahd->bshs[0].maddr + port);
+ } else {
+ x = inw(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
+ }
+ mb();
+ return (x);
+}
+#endif
+
+void
+ahd_outb(struct ahd_softc * ahd, long port, uint8_t val)
+{
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ writeb(val, ahd->bshs[0].maddr + port);
+ } else {
+ outb(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
+ }
+ mb();
+}
+
+void
+ahd_outw_atomic(struct ahd_softc * ahd, long port, uint16_t val)
+{
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ writew(val, ahd->bshs[0].maddr + port);
+ } else {
+ outw(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
+ }
+ mb();
+}
+
+void
+ahd_outsb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
+{
+ int i;
+
+ /*
+ * There is probably a more efficient way to do this on Linux
+ * but we don't use this for anything speed critical and this
+ * should work.
+ */
+ for (i = 0; i < count; i++)
+ ahd_outb(ahd, port, *array++);
+}
+
+void
+ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
+{
+ int i;
+
+ /*
+ * There is probably a more efficient way to do this on Linux
+ * but we don't use this for anything speed critical and this
+ * should work.
+ */
+ for (i = 0; i < count; i++)
+ *array++ = ahd_inb(ahd, port);
+}
+
+/******************************* PCI Routines *********************************/
+uint32_t
+ahd_pci_read_config(ahd_dev_softc_t pci, int reg, int width)
+{
+ switch (width) {
+ case 1:
+ {
+ uint8_t retval;
+
+ pci_read_config_byte(pci, reg, &retval);
+ return (retval);
+ }
+ case 2:
+ {
+ uint16_t retval;
+ pci_read_config_word(pci, reg, &retval);
+ return (retval);
+ }
+ case 4:
+ {
+ uint32_t retval;
+ pci_read_config_dword(pci, reg, &retval);
+ return (retval);
+ }
+ default:
+ panic("ahd_pci_read_config: Read size too big");
+ /* NOTREACHED */
+ return (0);
+ }
+}
+
+void
+ahd_pci_write_config(ahd_dev_softc_t pci, int reg, uint32_t value, int width)
+{
+ switch (width) {
+ case 1:
+ pci_write_config_byte(pci, reg, value);
+ break;
+ case 2:
+ pci_write_config_word(pci, reg, value);
+ break;
+ case 4:
+ pci_write_config_dword(pci, reg, value);
+ break;
+ default:
+ panic("ahd_pci_write_config: Write size too big");
+ /* NOTREACHED */
+ }
+}
+