Merge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6

[linux-2.6] / drivers / crypto / Kconfig

diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 8a70a9edabdafd1d0e4795793e625ca2e645a3e8..e522144cba3af9bc9d9e5e9bbc1e5dcb05e693c0 100644 (file)
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -27,6 +27,7 @@ config CRYPTO_DEV_PADLOCK_AES
        tristate "PadLock driver for AES algorithm"
        depends on CRYPTO_DEV_PADLOCK
        select CRYPTO_BLKCIPHER
        tristate "PadLock driver for AES algorithm"
        depends on CRYPTO_DEV_PADLOCK
        select CRYPTO_BLKCIPHER

+       select CRYPTO_AES

        help
          Use VIA PadLock for AES algorithm.
 
        help
          Use VIA PadLock for AES algorithm.
 


@@ -48,8 +49,6 @@ config CRYPTO_DEV_PADLOCK_SHA
          If unsure say M. The compiled module will be
          called padlock-sha.ko
 
          If unsure say M. The compiled module will be
          called padlock-sha.ko
 

-source "arch/s390/crypto/Kconfig"
-

 config CRYPTO_DEV_GEODE
        tristate "Support for the Geode LX AES engine"
        depends on X86_32 && PCI
 config CRYPTO_DEV_GEODE
        tristate "Support for the Geode LX AES engine"
        depends on X86_32 && PCI


@@ -66,6 +65,7 @@ config ZCRYPT
        tristate "Support for PCI-attached cryptographic adapters"
        depends on S390
        select ZCRYPT_MONOLITHIC if ZCRYPT="y"
        tristate "Support for PCI-attached cryptographic adapters"
        depends on S390
        select ZCRYPT_MONOLITHIC if ZCRYPT="y"

+       select HW_RANDOM

        help
          Select this option if you want to use a PCI-attached cryptographic
          adapter like:
        help
          Select this option if you want to use a PCI-attached cryptographic
          adapter like:


@@ -83,6 +83,80 @@ config ZCRYPT_MONOLITHIC
          that contains all parts of the crypto device driver (ap bus,
          request router and all the card drivers).
 
          that contains all parts of the crypto device driver (ap bus,
          request router and all the card drivers).
 

+config CRYPTO_SHA1_S390
+       tristate "SHA1 digest algorithm"
+       depends on S390
+       select CRYPTO_ALGAPI
+       help
+         This is the s390 hardware accelerated implementation of the
+         SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
+
+config CRYPTO_SHA256_S390
+       tristate "SHA256 digest algorithm"
+       depends on S390
+       select CRYPTO_ALGAPI
+       help
+         This is the s390 hardware accelerated implementation of the
+         SHA256 secure hash standard (DFIPS 180-2).
+
+         This version of SHA implements a 256 bit hash with 128 bits of
+         security against collision attacks.
+
+config CRYPTO_SHA512_S390
+       tristate "SHA384 and SHA512 digest algorithm"
+       depends on S390
+       select CRYPTO_ALGAPI
+       help
+         This is the s390 hardware accelerated implementation of the
+         SHA512 secure hash standard.
+
+         This version of SHA implements a 512 bit hash with 256 bits of
+         security against collision attacks. The code also includes SHA-384,
+         a 384 bit hash with 192 bits of security against collision attacks.
+
+
+config CRYPTO_DES_S390
+       tristate "DES and Triple DES cipher algorithms"
+       depends on S390
+       select CRYPTO_ALGAPI
+       select CRYPTO_BLKCIPHER
+       help
+         This us the s390 hardware accelerated implementation of the
+         DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
+
+config CRYPTO_AES_S390
+       tristate "AES cipher algorithms"
+       depends on S390
+       select CRYPTO_ALGAPI
+       select CRYPTO_BLKCIPHER
+       help
+         This is the s390 hardware accelerated implementation of the
+         AES cipher algorithms (FIPS-197). AES uses the Rijndael
+         algorithm.
+
+         Rijndael appears to be consistently a very good performer in
+         both hardware and software across a wide range of computing
+         environments regardless of its use in feedback or non-feedback
+         modes. Its key setup time is excellent, and its key agility is
+         good. Rijndael's very low memory requirements make it very well
+         suited for restricted-space environments, in which it also
+         demonstrates excellent performance. Rijndael's operations are
+         among the easiest to defend against power and timing attacks.
+
+         On s390 the System z9-109 currently only supports the key size
+         of 128 bit.
+
+config S390_PRNG
+       tristate "Pseudo random number generator device driver"
+       depends on S390
+       default "m"
+       help
+         Select this option if you want to use the s390 pseudo random number
+         generator. The PRNG is part of the cryptographic processor functions
+         and uses triple-DES to generate secure random numbers like the
+         ANSI X9.17 standard. The PRNG is usable via the char device
+         /dev/prandom.
+

 config CRYPTO_DEV_HIFN_795X
        tristate "Driver HIFN 795x crypto accelerator chips"
        select CRYPTO_DES
 config CRYPTO_DEV_HIFN_795X
        tristate "Driver HIFN 795x crypto accelerator chips"
        select CRYPTO_DES


@@ -100,4 +174,30 @@ config CRYPTO_DEV_HIFN_795X_RNG
          Select this option if you want to enable the random number generator
          on the HIFN 795x crypto adapters.
 
          Select this option if you want to enable the random number generator
          on the HIFN 795x crypto adapters.
 

+config CRYPTO_DEV_TALITOS
+       tristate "Talitos Freescale Security Engine (SEC)"
+       select CRYPTO_ALGAPI
+       select CRYPTO_AUTHENC
+       select HW_RANDOM
+       depends on FSL_SOC
+       help
+         Say 'Y' here to use the Freescale Security Engine (SEC)
+         to offload cryptographic algorithm computation.
+
+         The Freescale SEC is present on PowerQUICC 'E' processors, such
+         as the MPC8349E and MPC8548E.
+
+         To compile this driver as a module, choose M here: the module
+         will be called talitos.
+
+config CRYPTO_DEV_IXP4XX
+       tristate "Driver for IXP4xx crypto hardware acceleration"
+       depends on ARCH_IXP4XX
+       select CRYPTO_DES
+       select CRYPTO_ALGAPI
+       select CRYPTO_AUTHENC
+       select CRYPTO_BLKCIPHER
+       help
+         Driver for the IXP4xx NPE crypto engine.
+

 endif # CRYPTO_HW
 endif # CRYPTO_HW