-extern volatile unsigned long init_rsp;
-extern void (*initial_code)(void);
-
-#ifdef APIC_DEBUG
-static void inquire_remote_apic(int apicid)
-{
- unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
- char *names[] = { "ID", "VERSION", "SPIV" };
- int timeout;
- u32 status;
-
- printk(KERN_INFO "Inquiring remote APIC #%d...\n", apicid);
-
- for (i = 0; i < ARRAY_SIZE(regs); i++) {
- printk(KERN_INFO "... APIC #%d %s: ", apicid, names[i]);
-
- /*
- * Wait for idle.
- */
- status = safe_apic_wait_icr_idle();
- if (status)
- printk(KERN_CONT
- "a previous APIC delivery may have failed\n");
-
- apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
- apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]);
-
- timeout = 0;
- do {
- udelay(100);
- status = apic_read(APIC_ICR) & APIC_ICR_RR_MASK;
- } while (status == APIC_ICR_RR_INPROG && timeout++ < 1000);
-
- switch (status) {
- case APIC_ICR_RR_VALID:
- status = apic_read(APIC_RRR);
- printk(KERN_CONT "%08x\n", status);
- break;
- default:
- printk(KERN_CONT "failed\n");
- }
- }
-}
-#endif
-
-/*
- * Kick the secondary to wake up.
- */
-static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int start_rip)
-{
- unsigned long send_status, accept_status = 0;
- int maxlvt, num_starts, j;
-
- Dprintk("Asserting INIT.\n");
-
- /*
- * Turn INIT on target chip
- */
- apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
- /*
- * Send IPI
- */
- apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT
- | APIC_DM_INIT);
-
- Dprintk("Waiting for send to finish...\n");
- send_status = safe_apic_wait_icr_idle();
-
- mdelay(10);
-
- Dprintk("Deasserting INIT.\n");
-
- /* Target chip */
- apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
- /* Send IPI */
- apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
-
- Dprintk("Waiting for send to finish...\n");
- send_status = safe_apic_wait_icr_idle();
-
- mb();
- atomic_set(&init_deasserted, 1);
-
- num_starts = 2;
-
- /*
- * Run STARTUP IPI loop.
- */
- Dprintk("#startup loops: %d.\n", num_starts);
-
- maxlvt = lapic_get_maxlvt();
-
- for (j = 1; j <= num_starts; j++) {
- Dprintk("Sending STARTUP #%d.\n",j);
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
- Dprintk("After apic_write.\n");
-
- /*
- * STARTUP IPI
- */
-
- /* Target chip */
- apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
- /* Boot on the stack */
- /* Kick the second */
- apic_write(APIC_ICR, APIC_DM_STARTUP | (start_rip >> 12));
-
- /*
- * Give the other CPU some time to accept the IPI.
- */
- udelay(300);
-
- Dprintk("Startup point 1.\n");
-
- Dprintk("Waiting for send to finish...\n");
- send_status = safe_apic_wait_icr_idle();
-
- /*
- * Give the other CPU some time to accept the IPI.
- */
- udelay(200);
- /*
- * Due to the Pentium erratum 3AP.
- */
- if (maxlvt > 3) {
- apic_write(APIC_ESR, 0);
- }
- accept_status = (apic_read(APIC_ESR) & 0xEF);
- if (send_status || accept_status)
- break;
- }
- Dprintk("After Startup.\n");
-
- if (send_status)
- printk(KERN_ERR "APIC never delivered???\n");
- if (accept_status)
- printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
-
- return (send_status | accept_status);
-}
-
-struct create_idle {
- struct work_struct work;
- struct task_struct *idle;
- struct completion done;
- int cpu;
-};
-
-static void __cpuinit do_fork_idle(struct work_struct *work)
-{
- struct create_idle *c_idle =
- container_of(work, struct create_idle, work);
-
- c_idle->idle = fork_idle(c_idle->cpu);
- complete(&c_idle->done);
-}
-
-/*
- * Boot one CPU.
- */
-static int __cpuinit do_boot_cpu(int cpu, int apicid)
-{
- unsigned long boot_error;
- int timeout;
- unsigned long start_rip;
- struct create_idle c_idle = {
- .cpu = cpu,
- .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
- };
- INIT_WORK(&c_idle.work, do_fork_idle);
-
- /* allocate memory for gdts of secondary cpus. Hotplug is considered */
- if (!cpu_gdt_descr[cpu].address &&
- !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
- printk(KERN_ERR "Failed to allocate GDT for CPU %d\n", cpu);
- return -1;
- }
-
- /* Allocate node local memory for AP pdas */
- if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) {
- struct x8664_pda *newpda, *pda;
- int node = cpu_to_node(cpu);
- pda = cpu_pda(cpu);
- newpda = kmalloc_node(sizeof (struct x8664_pda), GFP_ATOMIC,
- node);
- if (newpda) {
- memcpy(newpda, pda, sizeof (struct x8664_pda));
- cpu_pda(cpu) = newpda;
- } else
- printk(KERN_ERR
- "Could not allocate node local PDA for CPU %d on node %d\n",
- cpu, node);
- }
-
- alternatives_smp_switch(1);
-
- c_idle.idle = get_idle_for_cpu(cpu);
-
- if (c_idle.idle) {
- c_idle.idle->thread.sp = (unsigned long) (((struct pt_regs *)
- (THREAD_SIZE + task_stack_page(c_idle.idle))) - 1);
- init_idle(c_idle.idle, cpu);
- goto do_rest;
- }
-
- /*
- * During cold boot process, keventd thread is not spun up yet.
- * When we do cpu hot-add, we create idle threads on the fly, we should
- * not acquire any attributes from the calling context. Hence the clean
- * way to create kernel_threads() is to do that from keventd().
- * We do the current_is_keventd() due to the fact that ACPI notifier
- * was also queuing to keventd() and when the caller is already running
- * in context of keventd(), we would end up with locking up the keventd
- * thread.
- */
- if (!keventd_up() || current_is_keventd())
- c_idle.work.func(&c_idle.work);
- else {
- schedule_work(&c_idle.work);
- wait_for_completion(&c_idle.done);
- }
-
- if (IS_ERR(c_idle.idle)) {
- printk("failed fork for CPU %d\n", cpu);
- return PTR_ERR(c_idle.idle);
- }
-
- set_idle_for_cpu(cpu, c_idle.idle);
-
-do_rest:
-
- cpu_pda(cpu)->pcurrent = c_idle.idle;
-
- start_rip = setup_trampoline();
-
- init_rsp = c_idle.idle->thread.sp;
- load_sp0(&per_cpu(init_tss, cpu), &c_idle.idle->thread);
- initial_code = start_secondary;
- clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
-
- printk(KERN_INFO "Booting processor %d/%d APIC 0x%x\n", cpu,
- cpus_weight(cpu_present_map),
- apicid);
-
- /*
- * This grunge runs the startup process for
- * the targeted processor.
- */
-
- atomic_set(&init_deasserted, 0);
-
- Dprintk("Setting warm reset code and vector.\n");
-
- CMOS_WRITE(0xa, 0xf);
- local_flush_tlb();
- Dprintk("1.\n");
- *((volatile unsigned short *) phys_to_virt(0x469)) = start_rip >> 4;
- Dprintk("2.\n");
- *((volatile unsigned short *) phys_to_virt(0x467)) = start_rip & 0xf;
- Dprintk("3.\n");
-
- /*
- * Be paranoid about clearing APIC errors.
- */
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
-
- /*
- * Status is now clean
- */
- boot_error = 0;
-
- /*
- * Starting actual IPI sequence...
- */
- boot_error = wakeup_secondary_via_INIT(apicid, start_rip);
-
- if (!boot_error) {
- /*
- * allow APs to start initializing.
- */
- Dprintk("Before Callout %d.\n", cpu);
- cpu_set(cpu, cpu_callout_map);
- Dprintk("After Callout %d.\n", cpu);
-
- /*
- * Wait 5s total for a response
- */
- for (timeout = 0; timeout < 50000; timeout++) {
- if (cpu_isset(cpu, cpu_callin_map))
- break; /* It has booted */
- udelay(100);
- }
-
- if (cpu_isset(cpu, cpu_callin_map)) {
- /* number CPUs logically, starting from 1 (BSP is 0) */
- Dprintk("CPU has booted.\n");
- } else {
- boot_error = 1;
- if (*((volatile unsigned char *)phys_to_virt(SMP_TRAMPOLINE_BASE))
- == 0xA5)
- /* trampoline started but...? */
- printk("Stuck ??\n");
- else
- /* trampoline code not run */
- printk("Not responding.\n");
-#ifdef APIC_DEBUG
- inquire_remote_apic(apicid);
-#endif
- }
- }
- if (boot_error) {
- cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
- clear_bit(cpu, (unsigned long *)&cpu_initialized); /* was set by cpu_init() */
- clear_node_cpumask(cpu); /* was set by numa_add_cpu */
- cpu_clear(cpu, cpu_present_map);
- cpu_clear(cpu, cpu_possible_map);
- per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID;
- return -EIO;
- }
-
- return 0;
-}
-