[POWERPC] spufs: fix incorrect file descriptors in SPU coredump note names

[linux-2.6] / arch / powerpc / Kconfig.debug

diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 6a79fe43e229e9036a25b8792eb45246f44db30c..db7cc34c24d4d983030adeebb029be70925587e3 100644 (file)
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -151,6 +151,13 @@ config BOOTX_TEXT
 
 config PPC_EARLY_DEBUG
        bool "Early debugging (dangerous)"
 
 config PPC_EARLY_DEBUG
        bool "Early debugging (dangerous)"

+       help
+         Say Y to enable some early debugging facilities that may be available
+         for your processor/board combination. Those facilities are hacks
+         intended to debug problems early during boot, this should not be
+         enabled in a production kernel.
+         Note that enabling this will also cause the kernel default log level
+         to be pushed to max automatically very early during boot

 
 choice
        prompt "Early debugging console"
 
 choice
        prompt "Early debugging console"


@@ -218,7 +225,16 @@ config PPC_EARLY_DEBUG_44x
        depends on 44x
        help
          Select this to enable early debugging for IBM 44x chips via the
        depends on 44x
        help
          Select this to enable early debugging for IBM 44x chips via the

-         inbuilt serial port.
+         inbuilt serial port.  If you enable this, ensure you set
+          PPC_EARLY_DEBUG_44x_PHYSLOW below to suit your target board.
+
+config PPC_EARLY_DEBUG_40x
+       bool "Early serial debugging for IBM/AMCC 40x CPUs"
+       depends on 40x
+       help
+         Select this to enable early debugging for IBM 40x chips via the
+         inbuilt serial port. This works on chips with a 16550 compatible
+         UART. Xilinx chips with uartlite cannot use this option.

 
 config PPC_EARLY_DEBUG_CPM
        bool "Early serial debugging for Freescale CPM-based serial ports"
 
 config PPC_EARLY_DEBUG_CPM
        bool "Early serial debugging for Freescale CPM-based serial ports"


@@ -235,12 +251,20 @@ config PPC_EARLY_DEBUG_44x_PHYSLOW
        hex "Low 32 bits of early debug UART physical address"
        depends on PPC_EARLY_DEBUG_44x
        default "0x40000200"
        hex "Low 32 bits of early debug UART physical address"
        depends on PPC_EARLY_DEBUG_44x
        default "0x40000200"

+       help
+         You probably want 0x40000200 for ebony boards and
+          0x40000300 for taishan

 
 config PPC_EARLY_DEBUG_44x_PHYSHIGH
        hex "EPRN of early debug UART physical address"
        depends on PPC_EARLY_DEBUG_44x
        default "0x1"
 
 
 config PPC_EARLY_DEBUG_44x_PHYSHIGH
        hex "EPRN of early debug UART physical address"
        depends on PPC_EARLY_DEBUG_44x
        default "0x1"
 

+config PPC_EARLY_DEBUG_40x_PHYSADDR
+       hex "Early debug UART physical address"
+       depends on PPC_EARLY_DEBUG_40x
+       default "0xef600300"
+

 config PPC_EARLY_DEBUG_CPM_ADDR
        hex "CPM UART early debug transmit descriptor address"
        depends on PPC_EARLY_DEBUG_CPM
 config PPC_EARLY_DEBUG_CPM_ADDR
        hex "CPM UART early debug transmit descriptor address"
        depends on PPC_EARLY_DEBUG_CPM