-void (*pm_cpu_prep)(void);
-void (*pm_cpu_sleep)(void);
-
-#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
-
-/* s3c2410_pm_enter
- *
- * central control for sleep/resume process
-*/
-
-static int s3c2410_pm_enter(suspend_state_t state)
-{
- unsigned long regs_save[16];
-
- /* ensure the debug is initialised (if enabled) */
-
- s3c2410_pm_debug_init();
-
- DBG("s3c2410_pm_enter(%d)\n", state);
-
- if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
- printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
- return -EINVAL;
- }
-
- if (state != PM_SUSPEND_MEM) {
- printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n");
- return -EINVAL;
- }
-
- /* check if we have anything to wake-up with... bad things seem
- * to happen if you suspend with no wakeup (system will often
- * require a full power-cycle)
- */
-
- if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
- !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
- printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
- printk(KERN_ERR PFX "Aborting sleep\n");
- return -EINVAL;
- }
-
- /* prepare check area if configured */
-
- s3c2410_pm_check_prepare();
-
- /* store the physical address of the register recovery block */
-
- s3c2410_sleep_save_phys = virt_to_phys(regs_save);
-
- DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
-
- /* save all necessary core registers not covered by the drivers */
-
- s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
- s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
-
- /* set the irq configuration for wake */
-
- s3c2410_pm_configure_extint();
-
- DBG("sleep: irq wakeup masks: %08lx,%08lx\n",
- s3c_irqwake_intmask, s3c_irqwake_eintmask);
-
- __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
- __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
-
- /* ack any outstanding external interrupts before we go to sleep */
-
- __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
- __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
- __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
-
- /* call cpu specific preperation */
-
- pm_cpu_prep();
-
- /* flush cache back to ram */
-
- flush_cache_all();
-
- s3c2410_pm_check_store();
-
- /* send the cpu to sleep... */
-
- __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
-
- /* s3c2410_cpu_save will also act as our return point from when
- * we resume as it saves its own register state, so use the return
- * code to differentiate return from save and return from sleep */
-
- if (s3c2410_cpu_save(regs_save) == 0) {
- flush_cache_all();
- pm_cpu_sleep();
- }
-
- /* restore the cpu state */
-
- cpu_init();
-
- /* restore the system state */
-
- s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
- s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
-
- s3c2410_pm_debug_init();
-
- /* check what irq (if any) restored the system */
-
- DBG("post sleep: IRQs 0x%08x, 0x%08x\n",
- __raw_readl(S3C2410_SRCPND),
- __raw_readl(S3C2410_EINTPEND));
-
- s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
- s3c_irqwake_intmask);
-
- s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
- s3c_irqwake_eintmask);
-
- DBG("post sleep, preparing to return\n");
-
- s3c2410_pm_check_restore();
-
- /* ok, let's return from sleep */