#include <linux/libata.h>
#define DRV_NAME "sata_sil"
-#define DRV_VERSION "2.2"
+#define DRV_VERSION "2.3"
enum {
SIL_MMIO_BAR = 5,
SIL_FLAG_MOD15WRITE = (1 << 30),
SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME,
+ ATA_FLAG_MMIO,
/*
* Controller IDs
SIL_QUIRK_UDMA5MAX = (1 << 1),
};
-static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
#ifdef CONFIG_PM
static int sil_pci_device_resume(struct pci_dev *pdev);
#endif
static void sil_dev_config(struct ata_device *dev);
-static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
-static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
-static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed);
+static int sil_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
+static int sil_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
+static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed);
static void sil_freeze(struct ata_port *ap);
static void sil_thaw(struct ata_port *ap);
/* TODO firmware versions should be added - eric */
static const struct sil_drivelist {
- const char * product;
+ const char *product;
unsigned int quirk;
} sil_blacklist [] = {
{ "ST320012AS", SIL_QUIRK_MOD15WRITE },
};
static struct scsi_host_template sil_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations sil_ops = {
- .port_disable = ata_port_disable,
+static struct ata_port_operations sil_ops = {
+ .inherits = &ata_bmdma_port_ops,
.dev_config = sil_dev_config,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
.set_mode = sil_set_mode,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
.freeze = sil_freeze,
.thaw = sil_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
- .irq_ack = ata_irq_ack,
.scr_read = sil_scr_read,
.scr_write = sil_scr_write,
- .port_start = ata_port_start,
};
static const struct ata_port_info sil_port_info[] = {
MODULE_DEVICE_TABLE(pci, sil_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-static int slow_down = 0;
+static int slow_down;
module_param(slow_down, int, 0444);
MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)");
/**
* sil_set_mode - wrap set_mode functions
- * @ap: port to set up
+ * @link: link to set up
* @r_failed: returned device when we fail
*
* Wrap the libata method for device setup as after the setup we need
* to inspect the results and do some configuration work
*/
-static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed)
+static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed)
{
- struct ata_host *host = ap->host;
- struct ata_device *dev;
- void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR];
+ struct ata_port *ap = link->ap;
+ void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR];
void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode;
- u32 tmp, dev_mode[2];
- unsigned int i;
+ struct ata_device *dev;
+ u32 tmp, dev_mode[2] = { };
int rc;
- rc = ata_do_set_mode(ap, r_failed);
+ rc = ata_do_set_mode(link, r_failed);
if (rc)
return rc;
- for (i = 0; i < 2; i++) {
- dev = &ap->device[i];
+ ata_link_for_each_dev(dev, link) {
if (!ata_dev_enabled(dev))
- dev_mode[i] = 0; /* PIO0/1/2 */
+ dev_mode[dev->devno] = 0; /* PIO0/1/2 */
else if (dev->flags & ATA_DFLAG_PIO)
- dev_mode[i] = 1; /* PIO3/4 */
+ dev_mode[dev->devno] = 1; /* PIO3/4 */
else
- dev_mode[i] = 3; /* UDMA */
+ dev_mode[dev->devno] = 3; /* UDMA */
/* value 2 indicates MDMA */
}
return 0;
}
-static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_reg)
+static inline void __iomem *sil_scr_addr(struct ata_port *ap,
+ unsigned int sc_reg)
{
void __iomem *offset = ap->ioaddr.scr_addr;
return NULL;
}
-static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg)
+static int sil_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
{
void __iomem *mmio = sil_scr_addr(ap, sc_reg);
- if (mmio)
- return readl(mmio);
- return 0xffffffffU;
+
+ if (mmio) {
+ *val = readl(mmio);
+ return 0;
+ }
+ return -EINVAL;
}
-static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
+static int sil_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
{
void __iomem *mmio = sil_scr_addr(ap, sc_reg);
- if (mmio)
+
+ if (mmio) {
writel(val, mmio);
+ return 0;
+ }
+ return -EINVAL;
}
static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
{
- struct ata_eh_info *ehi = &ap->eh_info;
- struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
u8 status;
if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) {
* controllers continue to assert IRQ as long as
* SError bits are pending. Clear SError immediately.
*/
- serror = sil_scr_read(ap, SCR_ERROR);
+ sil_scr_read(ap, SCR_ERROR, &serror);
sil_scr_write(ap, SCR_ERROR, serror);
- /* Trigger hotplug and accumulate SError only if the
- * port isn't already frozen. Otherwise, PHY events
- * during hardreset makes controllers with broken SIEN
- * repeat probing needlessly.
+ /* Sometimes spurious interrupts occur, double check
+ * it's PHYRDY CHG.
*/
- if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
- ata_ehi_hotplugged(&ap->eh_info);
- ap->eh_info.serror |= serror;
+ if (serror & SERR_PHYRDY_CHG) {
+ ap->link.eh_info.serror |= serror;
+ goto freeze;
}
- goto freeze;
+ if (!(bmdma2 & SIL_DMA_COMPLETE))
+ return;
}
- if (unlikely(!qc))
- goto freeze;
-
- if (unlikely(qc->tf.flags & ATA_TFLAG_POLLING)) {
+ if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
/* this sometimes happens, just clear IRQ */
- ata_chk_status(ap);
+ ap->ops->sff_check_status(ap);
return;
}
*/
/* Check the ATA_DFLAG_CDB_INTR flag is enough here.
- * The flag was turned on only for atapi devices.
- * No need to check is_atapi_taskfile(&qc->tf) again.
+ * The flag was turned on only for atapi devices. No
+ * need to check ata_is_atapi(qc->tf.protocol) again.
*/
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
goto err_hsm;
break;
case HSM_ST_LAST:
- if (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
+ if (ata_is_dma(qc->tf.protocol)) {
/* clear DMA-Start bit */
ap->ops->bmdma_stop(qc);
}
/* check main status, clearing INTRQ */
- status = ata_chk_status(ap);
+ status = ap->ops->sff_check_status(ap);
if (unlikely(status & ATA_BUSY))
goto err_hsm;
/* ack bmdma irq events */
- ata_bmdma_irq_clear(ap);
+ ata_sff_irq_clear(ap);
/* kick HSM in the ass */
- ata_hsm_move(ap, qc, status, 0);
+ ata_sff_hsm_move(ap, qc, status, 0);
- if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATA_PROT_ATAPI_DMA))
+ if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol))
ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2);
return;
u32 tmp;
/* clear IRQ */
- ata_chk_status(ap);
- ata_bmdma_irq_clear(ap);
+ ap->ops->sff_check_status(ap);
+ ata_sff_irq_clear(ap);
/* turn on SATA IRQ if supported */
if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
*/
static void sil_dev_config(struct ata_device *dev)
{
- struct ata_port *ap = dev->ap;
- int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO;
+ struct ata_port *ap = dev->link->ap;
+ int print_info = ap->link.eh_context.i.flags & ATA_EHI_PRINTINFO;
unsigned int n, quirks = 0;
unsigned char model_num[ATA_ID_PROD_LEN + 1];
}
}
-static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
int board_id = ent->driver_data;
mmio_base = host->iomap[SIL_MMIO_BAR];
for (i = 0; i < host->n_ports; i++) {
- struct ata_ioports *ioaddr = &host->ports[i]->ioaddr;
+ struct ata_port *ap = host->ports[i];
+ struct ata_ioports *ioaddr = &ap->ioaddr;
ioaddr->cmd_addr = mmio_base + sil_port[i].tf;
ioaddr->altstatus_addr =
ioaddr->ctl_addr = mmio_base + sil_port[i].ctl;
ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma;
ioaddr->scr_addr = mmio_base + sil_port[i].scr;
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
+
+ ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio");
+ ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf");
}
/* initialize and activate */