err.no Git - linux-2.6/blob - net/mac80211/mesh_plink.c

   1 /*
   2  * Copyright (c) 2008 open80211s Ltd.
   3  * Author:     Luis Carlos Cobo <luisca@cozybit.com>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * published by the Free Software Foundation.
   8  */
   9 #include <linux/kernel.h>
  10 #include <linux/random.h>
  11 #include "ieee80211_i.h"
  12 #include "rate.h"
  13 #include "mesh.h"
  14
  15 #ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
  16 #define mpl_dbg(fmt, args...)   printk(KERN_DEBUG fmt, ##args)
  17 #else
  18 #define mpl_dbg(fmt, args...)   do { (void)(0); } while (0)
  19 #endif
  20
  21 #define PLINK_GET_FRAME_SUBTYPE(p) (p)
  22 #define PLINK_GET_LLID(p) (p + 1)
  23 #define PLINK_GET_PLID(p) (p + 3)
  24
  25 #define mod_plink_timer(s, t) (mod_timer(&s->plink_timer, \
  26                                 jiffies + HZ * t / 1000))
  27
  28 /* Peer link cancel reasons, all subject to ANA approval */
  29 #define MESH_LINK_CANCELLED                     2
  30 #define MESH_MAX_NEIGHBORS                      3
  31 #define MESH_CAPABILITY_POLICY_VIOLATION        4
  32 #define MESH_CLOSE_RCVD                         5
  33 #define MESH_MAX_RETRIES                        6
  34 #define MESH_CONFIRM_TIMEOUT                    7
  35 #define MESH_SECURITY_ROLE_NEGOTIATION_DIFFERS  8
  36 #define MESH_SECURITY_AUTHENTICATION_IMPOSSIBLE 9
  37 #define MESH_SECURITY_FAILED_VERIFICATION       10
  38
  39 #define dot11MeshMaxRetries(s) (s->u.sta.mshcfg.dot11MeshMaxRetries)
  40 #define dot11MeshRetryTimeout(s) (s->u.sta.mshcfg.dot11MeshRetryTimeout)
  41 #define dot11MeshConfirmTimeout(s) (s->u.sta.mshcfg.dot11MeshConfirmTimeout)
  42 #define dot11MeshHoldingTimeout(s) (s->u.sta.mshcfg.dot11MeshHoldingTimeout)
  43 #define dot11MeshMaxPeerLinks(s) (s->u.sta.mshcfg.dot11MeshMaxPeerLinks)
  44
  45 enum plink_frame_type {
  46         PLINK_OPEN = 0,
  47         PLINK_CONFIRM,
  48         PLINK_CLOSE
  49 };
  50
  51 enum plink_event {
  52         PLINK_UNDEFINED,
  53         OPN_ACPT,
  54         OPN_RJCT,
  55         OPN_IGNR,
  56         CNF_ACPT,
  57         CNF_RJCT,
  58         CNF_IGNR,
  59         CLS_ACPT,
  60         CLS_IGNR
  61 };
  62
  63 static inline
  64 void mesh_plink_inc_estab_count(struct ieee80211_sub_if_data *sdata)
  65 {
  66         atomic_inc(&sdata->u.sta.mshstats.estab_plinks);
  67         mesh_accept_plinks_update(sdata);
  68 }
  69
  70 static inline
  71 void mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata)
  72 {
  73         atomic_dec(&sdata->u.sta.mshstats.estab_plinks);
  74         mesh_accept_plinks_update(sdata);
  75 }
  76
  77 /**
  78  * mesh_plink_fsm_restart - restart a mesh peer link finite state machine
  79  *
  80  * @sta: mes peer link to restart
  81  *
  82  * Locking: this function must be called holding sta->lock
  83  */
  84 static inline void mesh_plink_fsm_restart(struct sta_info *sta)
  85 {
  86         sta->plink_state = PLINK_LISTEN;
  87         sta->llid = sta->plid = sta->reason = 0;
  88         sta->plink_retries = 0;
  89 }
  90
  91 /*
  92  * NOTE: This is just an alias for sta_info_alloc(), see notes
  93  *       on it in the lifecycle management section!
  94  */
  95 static struct sta_info *mesh_plink_alloc(struct ieee80211_sub_if_data *sdata,
  96                                          u8 *hw_addr, u64 rates)
  97 {
  98         struct ieee80211_local *local = sdata->local;
  99         struct sta_info *sta;
 100
 101         if (local->num_sta >= MESH_MAX_PLINKS)
 102                 return NULL;
 103
 104         sta = sta_info_alloc(sdata, hw_addr, GFP_ATOMIC);
 105         if (!sta)
 106                 return NULL;
 107
 108         sta->flags = WLAN_STA_AUTHORIZED;
 109         sta->supp_rates[local->hw.conf.channel->band] = rates;
 110
 111         return sta;
 112 }
 113
 114 /**
 115  * mesh_plink_deactivate - deactivate mesh peer link
 116  *
 117  * @sta: mesh peer link to deactivate
 118  *
 119  * All mesh paths with this peer as next hop will be flushed
 120  *
 121  * Locking: the caller must hold sta->lock
 122  */
 123 static void __mesh_plink_deactivate(struct sta_info *sta)
 124 {
 125         struct ieee80211_sub_if_data *sdata = sta->sdata;
 126
 127         if (sta->plink_state == PLINK_ESTAB)
 128                 mesh_plink_dec_estab_count(sdata);
 129         sta->plink_state = PLINK_BLOCKED;
 130         mesh_path_flush_by_nexthop(sta);
 131 }
 132
 133 /**
 134  * __mesh_plink_deactivate - deactivate mesh peer link
 135  *
 136  * @sta: mesh peer link to deactivate
 137  *
 138  * All mesh paths with this peer as next hop will be flushed
 139  */
 140 void mesh_plink_deactivate(struct sta_info *sta)
 141 {
 142         spin_lock_bh(&sta->lock);
 143         __mesh_plink_deactivate(sta);
 144         spin_unlock_bh(&sta->lock);
 145 }
 146
 147 static int mesh_plink_frame_tx(struct net_device *dev,
 148                 enum plink_frame_type action, u8 *da, __le16 llid, __le16 plid,
 149                 __le16 reason) {
 150         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 151         struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
 152         struct ieee80211_mgmt *mgmt;
 153         bool include_plid = false;
 154         u8 *pos;
 155         int ie_len;
 156
 157         if (!skb)
 158                 return -1;
 159         skb_reserve(skb, local->hw.extra_tx_headroom);
 160         /* 25 is the size of the common mgmt part (24) plus the size of the
 161          * common action part (1)
 162          */
 163         mgmt = (struct ieee80211_mgmt *)
 164                 skb_put(skb, 25 + sizeof(mgmt->u.action.u.plink_action));
 165         memset(mgmt, 0, 25 + sizeof(mgmt->u.action.u.plink_action));
 166         mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
 167                                            IEEE80211_STYPE_ACTION);
 168         memcpy(mgmt->da, da, ETH_ALEN);
 169         memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
 170         /* BSSID is left zeroed, wildcard value */
 171         mgmt->u.action.category = PLINK_CATEGORY;
 172         mgmt->u.action.u.plink_action.action_code = action;
 173
 174         if (action == PLINK_CLOSE)
 175                 mgmt->u.action.u.plink_action.aux = reason;
 176         else {
 177                 mgmt->u.action.u.plink_action.aux = cpu_to_le16(0x0);
 178                 if (action == PLINK_CONFIRM) {
 179                         pos = skb_put(skb, 4);
 180                         /* two-byte status code followed by two-byte AID */
 181                         memset(pos, 0, 4);
 182                 }
 183                 mesh_mgmt_ies_add(skb, dev);
 184         }
 185
 186         /* Add Peer Link Management element */
 187         switch (action) {
 188         case PLINK_OPEN:
 189                 ie_len = 3;
 190                 break;
 191         case PLINK_CONFIRM:
 192                 ie_len = 5;
 193                 include_plid = true;
 194                 break;
 195         case PLINK_CLOSE:
 196         default:
 197                 if (!plid)
 198                         ie_len = 5;
 199                 else {
 200                         ie_len = 7;
 201                         include_plid = true;
 202                 }
 203                 break;
 204         }
 205
 206         pos = skb_put(skb, 2 + ie_len);
 207         *pos++ = WLAN_EID_PEER_LINK;
 208         *pos++ = ie_len;
 209         *pos++ = action;
 210         memcpy(pos, &llid, 2);
 211         if (include_plid) {
 212                 pos += 2;
 213                 memcpy(pos, &plid, 2);
 214         }
 215         if (action == PLINK_CLOSE) {
 216                 pos += 2;
 217                 memcpy(pos, &reason, 2);
 218         }
 219
 220         ieee80211_sta_tx(dev, skb, 0);
 221         return 0;
 222 }
 223
 224 void mesh_neighbour_update(u8 *hw_addr, u64 rates, struct net_device *dev,
 225                            bool peer_accepting_plinks)
 226 {
 227         struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 228         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 229         struct sta_info *sta;
 230
 231         rcu_read_lock();
 232
 233         sta = sta_info_get(local, hw_addr);
 234         if (!sta) {
 235                 sta = mesh_plink_alloc(sdata, hw_addr, rates);
 236                 if (!sta) {
 237                         rcu_read_unlock();
 238                         return;
 239                 }
 240                 if (sta_info_insert(sta)) {
 241                         rcu_read_unlock();
 242                         return;
 243                 }
 244         }
 245
 246         sta->last_rx = jiffies;
 247         sta->supp_rates[local->hw.conf.channel->band] = rates;
 248         if (peer_accepting_plinks && sta->plink_state == PLINK_LISTEN &&
 249                         sdata->u.sta.accepting_plinks &&
 250                         sdata->u.sta.mshcfg.auto_open_plinks)
 251                 mesh_plink_open(sta);
 252
 253         rcu_read_unlock();
 254 }
 255
 256 static void mesh_plink_timer(unsigned long data)
 257 {
 258         struct sta_info *sta;
 259         __le16 llid, plid, reason;
 260         struct net_device *dev = NULL;
 261         struct ieee80211_sub_if_data *sdata;
 262 #ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
 263         DECLARE_MAC_BUF(mac);
 264 #endif
 265
 266         /*
 267          * This STA is valid because sta_info_destroy() will
 268          * del_timer_sync() this timer after having made sure
 269          * it cannot be readded (by deleting the plink.)
 270          */
 271         sta = (struct sta_info *) data;
 272
 273         spin_lock_bh(&sta->lock);
 274         if (sta->ignore_plink_timer) {
 275                 sta->ignore_plink_timer = false;
 276                 spin_unlock_bh(&sta->lock);
 277                 return;
 278         }
 279         mpl_dbg("Mesh plink timer for %s fired on state %d\n",
 280                         print_mac(mac, sta->addr), sta->plink_state);
 281         reason = 0;
 282         llid = sta->llid;
 283         plid = sta->plid;
 284         sdata = sta->sdata;
 285         dev = sdata->dev;
 286
 287         switch (sta->plink_state) {
 288         case PLINK_OPN_RCVD:
 289         case PLINK_OPN_SNT:
 290                 /* retry timer */
 291                 if (sta->plink_retries < dot11MeshMaxRetries(sdata)) {
 292                         u32 rand;
 293                         mpl_dbg("Mesh plink for %s (retry, timeout): %d %d\n",
 294                                         print_mac(mac, sta->addr),
 295                                         sta->plink_retries, sta->plink_timeout);
 296                         get_random_bytes(&rand, sizeof(u32));
 297                         sta->plink_timeout = sta->plink_timeout +
 298                                              rand % sta->plink_timeout;
 299                         ++sta->plink_retries;
 300                         mod_plink_timer(sta, sta->plink_timeout);
 301                         spin_unlock_bh(&sta->lock);
 302                         mesh_plink_frame_tx(dev, PLINK_OPEN, sta->addr, llid,
 303                                             0, 0);
 304                         break;
 305                 }
 306                 reason = cpu_to_le16(MESH_MAX_RETRIES);
 307                 /* fall through on else */
 308         case PLINK_CNF_RCVD:
 309                 /* confirm timer */
 310                 if (!reason)
 311                         reason = cpu_to_le16(MESH_CONFIRM_TIMEOUT);
 312                 sta->plink_state = PLINK_HOLDING;
 313                 mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
 314                 spin_unlock_bh(&sta->lock);
 315                 mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid, plid,
 316                                     reason);
 317                 break;
 318         case PLINK_HOLDING:
 319                 /* holding timer */
 320                 del_timer(&sta->plink_timer);
 321                 mesh_plink_fsm_restart(sta);
 322                 spin_unlock_bh(&sta->lock);
 323                 break;
 324         default:
 325                 spin_unlock_bh(&sta->lock);
 326                 break;
 327         }
 328 }
 329
 330 static inline void mesh_plink_timer_set(struct sta_info *sta, int timeout)
 331 {
 332         sta->plink_timer.expires = jiffies + (HZ * timeout / 1000);
 333         sta->plink_timer.data = (unsigned long) sta;
 334         sta->plink_timer.function = mesh_plink_timer;
 335         sta->plink_timeout = timeout;
 336         add_timer(&sta->plink_timer);
 337 }
 338
 339 int mesh_plink_open(struct sta_info *sta)
 340 {
 341         __le16 llid;
 342         struct ieee80211_sub_if_data *sdata = sta->sdata;
 343 #ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
 344         DECLARE_MAC_BUF(mac);
 345 #endif
 346
 347         spin_lock_bh(&sta->lock);
 348         get_random_bytes(&llid, 2);
 349         sta->llid = llid;
 350         if (sta->plink_state != PLINK_LISTEN) {
 351                 spin_unlock_bh(&sta->lock);
 352                 return -EBUSY;
 353         }
 354         sta->plink_state = PLINK_OPN_SNT;
 355         mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
 356         spin_unlock_bh(&sta->lock);
 357         mpl_dbg("Mesh plink: starting establishment with %s\n",
 358                 print_mac(mac, sta->addr));
 359
 360         return mesh_plink_frame_tx(sdata->dev, PLINK_OPEN,
 361                                    sta->addr, llid, 0, 0);
 362 }
 363
 364 void mesh_plink_block(struct sta_info *sta)
 365 {
 366 #ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
 367         DECLARE_MAC_BUF(mac);
 368 #endif
 369
 370         spin_lock_bh(&sta->lock);
 371         __mesh_plink_deactivate(sta);
 372         sta->plink_state = PLINK_BLOCKED;
 373         spin_unlock_bh(&sta->lock);
 374 }
 375
 376 int mesh_plink_close(struct sta_info *sta)
 377 {
 378         struct ieee80211_sub_if_data *sdata = sta->sdata;
 379         __le16 llid, plid, reason;
 380 #ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
 381         DECLARE_MAC_BUF(mac);
 382 #endif
 383
 384         mpl_dbg("Mesh plink: closing link with %s\n",
 385                         print_mac(mac, sta->addr));
 386         spin_lock_bh(&sta->lock);
 387         sta->reason = cpu_to_le16(MESH_LINK_CANCELLED);
 388         reason = sta->reason;
 389
 390         if (sta->plink_state == PLINK_LISTEN ||
 391             sta->plink_state == PLINK_BLOCKED) {
 392                 mesh_plink_fsm_restart(sta);
 393                 spin_unlock_bh(&sta->lock);
 394                 return 0;
 395         } else if (sta->plink_state == PLINK_ESTAB) {
 396                 __mesh_plink_deactivate(sta);
 397                 /* The timer should not be running */
 398                 mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
 399         } else if (!mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata)))
 400                 sta->ignore_plink_timer = true;
 401
 402         sta->plink_state = PLINK_HOLDING;
 403         llid = sta->llid;
 404         plid = sta->plid;
 405         spin_unlock_bh(&sta->lock);
 406         mesh_plink_frame_tx(sta->sdata->dev, PLINK_CLOSE, sta->addr, llid,
 407                             plid, reason);
 408         return 0;
 409 }
 410
 411 void mesh_rx_plink_frame(struct net_device *dev, struct ieee80211_mgmt *mgmt,
 412                          size_t len, struct ieee80211_rx_status *rx_status)
 413 {
 414         struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 415         struct ieee80211_local *local = sdata->local;
 416         struct ieee802_11_elems elems;
 417         struct sta_info *sta;
 418         enum plink_event event;
 419         enum plink_frame_type ftype;
 420         size_t baselen;
 421         u8 ie_len;
 422         u8 *baseaddr;
 423         __le16 plid, llid, reason;
 424 #ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
 425         DECLARE_MAC_BUF(mac);
 426 #endif
 427
 428         if (is_multicast_ether_addr(mgmt->da)) {
 429                 mpl_dbg("Mesh plink: ignore frame from multicast address");
 430                 return;
 431         }
 432
 433         baseaddr = mgmt->u.action.u.plink_action.variable;
 434         baselen = (u8 *) mgmt->u.action.u.plink_action.variable - (u8 *) mgmt;
 435         if (mgmt->u.action.u.plink_action.action_code == PLINK_CONFIRM) {
 436                 baseaddr += 4;
 437                 baselen -= 4;
 438         }
 439         ieee802_11_parse_elems(baseaddr, len - baselen, &elems);
 440         if (!elems.peer_link) {
 441                 mpl_dbg("Mesh plink: missing necessary peer link ie\n");
 442                 return;
 443         }
 444
 445         ftype = *((u8 *)PLINK_GET_FRAME_SUBTYPE(elems.peer_link));
 446         ie_len = elems.peer_link_len;
 447         if ((ftype == PLINK_OPEN && ie_len != 3) ||
 448             (ftype == PLINK_CONFIRM && ie_len != 5) ||
 449             (ftype == PLINK_CLOSE && ie_len != 5 && ie_len != 7)) {
 450                 mpl_dbg("Mesh plink: incorrect plink ie length\n");
 451                 return;
 452         }
 453
 454         if (ftype != PLINK_CLOSE && (!elems.mesh_id || !elems.mesh_config)) {
 455                 mpl_dbg("Mesh plink: missing necessary ie\n");
 456                 return;
 457         }
 458         /* Note the lines below are correct, the llid in the frame is the plid
 459          * from the point of view of this host.
 460          */
 461         memcpy(&plid, PLINK_GET_LLID(elems.peer_link), 2);
 462         if (ftype == PLINK_CONFIRM || (ftype == PLINK_CLOSE && ie_len == 7))
 463                 memcpy(&llid, PLINK_GET_PLID(elems.peer_link), 2);
 464
 465         rcu_read_lock();
 466
 467         sta = sta_info_get(local, mgmt->sa);
 468         if (!sta && ftype != PLINK_OPEN) {
 469                 mpl_dbg("Mesh plink: cls or cnf from unknown peer\n");
 470                 rcu_read_unlock();
 471                 return;
 472         }
 473
 474         if (sta && sta->plink_state == PLINK_BLOCKED) {
 475                 rcu_read_unlock();
 476                 return;
 477         }
 478
 479         /* Now we will figure out the appropriate event... */
 480         event = PLINK_UNDEFINED;
 481         if (ftype != PLINK_CLOSE && (!mesh_matches_local(&elems, dev))) {
 482                 switch (ftype) {
 483                 case PLINK_OPEN:
 484                         event = OPN_RJCT;
 485                         break;
 486                 case PLINK_CONFIRM:
 487                         event = CNF_RJCT;
 488                         break;
 489                 case PLINK_CLOSE:
 490                         /* avoid warning */
 491                         break;
 492                 }
 493                 spin_lock_bh(&sta->lock);
 494         } else if (!sta) {
 495                 /* ftype == PLINK_OPEN */
 496                 u64 rates;
 497                 if (!mesh_plink_free_count(sdata)) {
 498                         mpl_dbg("Mesh plink error: no more free plinks\n");
 499                         rcu_read_unlock();
 500                         return;
 501                 }
 502
 503                 rates = ieee80211_sta_get_rates(local, &elems, rx_status->band);
 504                 sta = mesh_plink_alloc(sdata, mgmt->sa, rates);
 505                 if (!sta) {
 506                         mpl_dbg("Mesh plink error: plink table full\n");
 507                         rcu_read_unlock();
 508                         return;
 509                 }
 510                 if (sta_info_insert(sta)) {
 511                         rcu_read_unlock();
 512                         return;
 513                 }
 514                 event = OPN_ACPT;
 515                 spin_lock_bh(&sta->lock);
 516         } else {
 517                 spin_lock_bh(&sta->lock);
 518                 switch (ftype) {
 519                 case PLINK_OPEN:
 520                         if (!mesh_plink_free_count(sdata) ||
 521                             (sta->plid && sta->plid != plid))
 522                                 event = OPN_IGNR;
 523                         else
 524                                 event = OPN_ACPT;
 525                         break;
 526                 case PLINK_CONFIRM:
 527                         if (!mesh_plink_free_count(sdata) ||
 528                             (sta->llid != llid || sta->plid != plid))
 529                                 event = CNF_IGNR;
 530                         else
 531                                 event = CNF_ACPT;
 532                         break;
 533                 case PLINK_CLOSE:
 534                         if (sta->plink_state == PLINK_ESTAB)
 535                                 /* Do not check for llid or plid. This does not
 536                                  * follow the standard but since multiple plinks
 537                                  * per sta are not supported, it is necessary in
 538                                  * order to avoid a livelock when MP A sees an
 539                                  * establish peer link to MP B but MP B does not
 540                                  * see it. This can be caused by a timeout in
 541                                  * B's peer link establishment or B beign
 542                                  * restarted.
 543                                  */
 544                                 event = CLS_ACPT;
 545                         else if (sta->plid != plid)
 546                                 event = CLS_IGNR;
 547                         else if (ie_len == 7 && sta->llid != llid)
 548                                 event = CLS_IGNR;
 549                         else
 550                                 event = CLS_ACPT;
 551                         break;
 552                 default:
 553                         mpl_dbg("Mesh plink: unknown frame subtype\n");
 554                         spin_unlock_bh(&sta->lock);
 555                         rcu_read_unlock();
 556                         return;
 557                 }
 558         }
 559
 560         mpl_dbg("Mesh plink (peer, state, llid, plid, event): %s %d %d %d %d\n",
 561                         print_mac(mac, mgmt->sa), sta->plink_state,
 562                         le16_to_cpu(sta->llid), le16_to_cpu(sta->plid),
 563                         event);
 564         reason = 0;
 565         switch (sta->plink_state) {
 566                 /* spin_unlock as soon as state is updated at each case */
 567         case PLINK_LISTEN:
 568                 switch (event) {
 569                 case CLS_ACPT:
 570                         mesh_plink_fsm_restart(sta);
 571                         spin_unlock_bh(&sta->lock);
 572                         break;
 573                 case OPN_ACPT:
 574                         sta->plink_state = PLINK_OPN_RCVD;
 575                         sta->plid = plid;
 576                         get_random_bytes(&llid, 2);
 577                         sta->llid = llid;
 578                         mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
 579                         spin_unlock_bh(&sta->lock);
 580                         mesh_plink_frame_tx(dev, PLINK_OPEN, sta->addr, llid,
 581                                             0, 0);
 582                         mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr,
 583                                             llid, plid, 0);
 584                         break;
 585                 default:
 586                         spin_unlock_bh(&sta->lock);
 587                         break;
 588                 }
 589                 break;
 590
 591         case PLINK_OPN_SNT:
 592                 switch (event) {
 593                 case OPN_RJCT:
 594                 case CNF_RJCT:
 595                         reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION);
 596                 case CLS_ACPT:
 597                         if (!reason)
 598                                 reason = cpu_to_le16(MESH_CLOSE_RCVD);
 599                         sta->reason = reason;
 600                         sta->plink_state = PLINK_HOLDING;
 601                         if (!mod_plink_timer(sta,
 602                                              dot11MeshHoldingTimeout(sdata)))
 603                                 sta->ignore_plink_timer = true;
 604
 605                         llid = sta->llid;
 606                         spin_unlock_bh(&sta->lock);
 607                         mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
 608                                             plid, reason);
 609                         break;
 610                 case OPN_ACPT:
 611                         /* retry timer is left untouched */
 612                         sta->plink_state = PLINK_OPN_RCVD;
 613                         sta->plid = plid;
 614                         llid = sta->llid;
 615                         spin_unlock_bh(&sta->lock);
 616                         mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
 617                                             plid, 0);
 618                         break;
 619                 case CNF_ACPT:
 620                         sta->plink_state = PLINK_CNF_RCVD;
 621                         if (!mod_plink_timer(sta,
 622                                              dot11MeshConfirmTimeout(sdata)))
 623                                 sta->ignore_plink_timer = true;
 624
 625                         spin_unlock_bh(&sta->lock);
 626                         break;
 627                 default:
 628                         spin_unlock_bh(&sta->lock);
 629                         break;
 630                 }
 631                 break;
 632
 633         case PLINK_OPN_RCVD:
 634                 switch (event) {
 635                 case OPN_RJCT:
 636                 case CNF_RJCT:
 637                         reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION);
 638                 case CLS_ACPT:
 639                         if (!reason)
 640                                 reason = cpu_to_le16(MESH_CLOSE_RCVD);
 641                         sta->reason = reason;
 642                         sta->plink_state = PLINK_HOLDING;
 643                         if (!mod_plink_timer(sta,
 644                                              dot11MeshHoldingTimeout(sdata)))
 645                                 sta->ignore_plink_timer = true;
 646
 647                         llid = sta->llid;
 648                         spin_unlock_bh(&sta->lock);
 649                         mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
 650                                             plid, reason);
 651                         break;
 652                 case OPN_ACPT:
 653                         llid = sta->llid;
 654                         spin_unlock_bh(&sta->lock);
 655                         mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
 656                                             plid, 0);
 657                         break;
 658                 case CNF_ACPT:
 659                         del_timer(&sta->plink_timer);
 660                         sta->plink_state = PLINK_ESTAB;
 661                         mesh_plink_inc_estab_count(sdata);
 662                         spin_unlock_bh(&sta->lock);
 663                         mpl_dbg("Mesh plink with %s ESTABLISHED\n",
 664                                         print_mac(mac, sta->addr));
 665                         break;
 666                 default:
 667                         spin_unlock_bh(&sta->lock);
 668                         break;
 669                 }
 670                 break;
 671
 672         case PLINK_CNF_RCVD:
 673                 switch (event) {
 674                 case OPN_RJCT:
 675                 case CNF_RJCT:
 676                         reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION);
 677                 case CLS_ACPT:
 678                         if (!reason)
 679                                 reason = cpu_to_le16(MESH_CLOSE_RCVD);
 680                         sta->reason = reason;
 681                         sta->plink_state = PLINK_HOLDING;
 682                         if (!mod_plink_timer(sta,
 683                                              dot11MeshHoldingTimeout(sdata)))
 684                                 sta->ignore_plink_timer = true;
 685
 686                         llid = sta->llid;
 687                         spin_unlock_bh(&sta->lock);
 688                         mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
 689                                             plid, reason);
 690                         break;
 691                 case OPN_ACPT:
 692                         del_timer(&sta->plink_timer);
 693                         sta->plink_state = PLINK_ESTAB;
 694                         mesh_plink_inc_estab_count(sdata);
 695                         spin_unlock_bh(&sta->lock);
 696                         mpl_dbg("Mesh plink with %s ESTABLISHED\n",
 697                                         print_mac(mac, sta->addr));
 698                         mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
 699                                             plid, 0);
 700                         break;
 701                 default:
 702                         spin_unlock_bh(&sta->lock);
 703                         break;
 704                 }
 705                 break;
 706
 707         case PLINK_ESTAB:
 708                 switch (event) {
 709                 case CLS_ACPT:
 710                         reason = cpu_to_le16(MESH_CLOSE_RCVD);
 711                         sta->reason = reason;
 712                         __mesh_plink_deactivate(sta);
 713                         sta->plink_state = PLINK_HOLDING;
 714                         llid = sta->llid;
 715                         mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
 716                         spin_unlock_bh(&sta->lock);
 717                         mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
 718                                             plid, reason);
 719                         break;
 720                 case OPN_ACPT:
 721                         llid = sta->llid;
 722                         spin_unlock_bh(&sta->lock);
 723                         mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
 724                                             plid, 0);
 725                         break;
 726                 default:
 727                         spin_unlock_bh(&sta->lock);
 728                         break;
 729                 }
 730                 break;
 731         case PLINK_HOLDING:
 732                 switch (event) {
 733                 case CLS_ACPT:
 734                         if (del_timer(&sta->plink_timer))
 735                                 sta->ignore_plink_timer = 1;
 736                         mesh_plink_fsm_restart(sta);
 737                         spin_unlock_bh(&sta->lock);
 738                         break;
 739                 case OPN_ACPT:
 740                 case CNF_ACPT:
 741                 case OPN_RJCT:
 742                 case CNF_RJCT:
 743                         llid = sta->llid;
 744                         reason = sta->reason;
 745                         spin_unlock_bh(&sta->lock);
 746                         mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
 747                                             plid, reason);
 748                         break;
 749                 default:
 750                         spin_unlock_bh(&sta->lock);
 751                 }
 752                 break;
 753         default:
 754                 /* should not get here, PLINK_BLOCKED is dealt with at the
 755                  * beggining of the function
 756                  */
 757                 spin_unlock_bh(&sta->lock);
 758                 break;
 759         }
 760
 761         rcu_read_unlock();
 762 }