2 Experimental ethernet netdevice using ATM AAL5 as underlying carrier
3 (RFC1483 obsoleted by RFC2684) for Linux 2.4
4 Author: Marcell GAL, 2000, XDSL Ltd, Hungary
7 #include <linux/module.h>
8 #include <linux/init.h>
9 #include <linux/kernel.h>
10 #include <linux/list.h>
11 #include <linux/netdevice.h>
12 #include <linux/skbuff.h>
13 #include <linux/etherdevice.h>
14 #include <linux/rtnetlink.h>
16 #include <asm/uaccess.h>
18 #include <linux/atm.h>
19 #include <linux/atmdev.h>
20 #include <linux/capability.h>
21 #include <linux/seq_file.h>
23 #include <linux/atmbr2684.h>
28 * Define this to use a version of the code which interacts with the higher
29 * layers in a more intellegent way, by always reserving enough space for
30 * our header at the begining of the packet. However, there may still be
31 * some problems with programs like tcpdump. In 2.5 we'll sort out what
32 * we need to do to get this perfect. For now we just will copy the packet
33 * if we need space for the header
35 /* #define FASTER_VERSION */
38 #define DPRINTK(format, args...) printk(KERN_DEBUG "br2684: " format, ##args)
40 #define DPRINTK(format, args...)
44 static void skb_debug(const struct sk_buff *skb)
47 char buf[NUM2PRINT * 3 + 1]; /* 3 chars per byte */
49 for (i = 0; i < skb->len && i < NUM2PRINT; i++) {
50 sprintf(buf + i * 3, "%2.2x ", 0xff & skb->data[i]);
52 printk(KERN_DEBUG "br2684: skb: %s\n", buf);
55 #define skb_debug(skb) do {} while (0)
58 static unsigned char llc_oui_pid_pad[] =
59 { 0xAA, 0xAA, 0x03, 0x00, 0x80, 0xC2, 0x00, 0x07, 0x00, 0x00 };
63 e_vc = BR2684_ENCAPS_VC,
64 e_llc = BR2684_ENCAPS_LLC,
68 struct atm_vcc *atmvcc;
69 struct net_device *device;
70 /* keep old push,pop functions for chaining */
71 void (*old_push)(struct atm_vcc *vcc,struct sk_buff *skb);
72 /* void (*old_pop)(struct atm_vcc *vcc,struct sk_buff *skb); */
73 enum br2684_encaps encaps;
74 struct list_head brvccs;
75 #ifdef CONFIG_ATM_BR2684_IPFILTER
76 struct br2684_filter filter;
77 #endif /* CONFIG_ATM_BR2684_IPFILTER */
78 #ifndef FASTER_VERSION
79 unsigned copies_needed, copies_failed;
80 #endif /* FASTER_VERSION */
84 struct net_device *net_dev;
85 struct list_head br2684_devs;
87 struct list_head brvccs; /* one device <=> one vcc (before xmas) */
88 struct net_device_stats stats;
93 * This lock should be held for writing any time the list of devices or
94 * their attached vcc's could be altered. It should be held for reading
95 * any time these are being queried. Note that we sometimes need to
96 * do read-locking under interrupt context, so write locking must block
97 * the current CPU's interrupts
99 static DEFINE_RWLOCK(devs_lock);
101 static LIST_HEAD(br2684_devs);
103 static inline struct br2684_dev *BRPRIV(const struct net_device *net_dev)
105 return (struct br2684_dev *) net_dev->priv;
108 static inline struct net_device *list_entry_brdev(const struct list_head *le)
110 return list_entry(le, struct br2684_dev, br2684_devs)->net_dev;
113 static inline struct br2684_vcc *BR2684_VCC(const struct atm_vcc *atmvcc)
115 return (struct br2684_vcc *) (atmvcc->user_back);
118 static inline struct br2684_vcc *list_entry_brvcc(const struct list_head *le)
120 return list_entry(le, struct br2684_vcc, brvccs);
123 /* Caller should hold read_lock(&devs_lock) */
124 static struct net_device *br2684_find_dev(const struct br2684_if_spec *s)
126 struct list_head *lh;
127 struct net_device *net_dev;
129 case BR2684_FIND_BYNUM:
130 list_for_each(lh, &br2684_devs) {
131 net_dev = list_entry_brdev(lh);
132 if (BRPRIV(net_dev)->number == s->spec.devnum)
136 case BR2684_FIND_BYIFNAME:
137 list_for_each(lh, &br2684_devs) {
138 net_dev = list_entry_brdev(lh);
139 if (!strncmp(net_dev->name, s->spec.ifname, IFNAMSIZ))
148 * Send a packet out a particular vcc. Not to useful right now, but paves
149 * the way for multiple vcc's per itf. Returns true if we can send,
152 static int br2684_xmit_vcc(struct sk_buff *skb, struct br2684_dev *brdev,
153 struct br2684_vcc *brvcc)
155 struct atm_vcc *atmvcc;
156 #ifdef FASTER_VERSION
157 if (brvcc->encaps == e_llc)
158 memcpy(skb_push(skb, 8), llc_oui_pid_pad, 8);
159 /* last 2 bytes of llc_oui_pid_pad are managed by header routines;
160 yes, you got it: 8 + 2 = sizeof(llc_oui_pid_pad)
163 int minheadroom = (brvcc->encaps == e_llc) ? 10 : 2;
164 if (skb_headroom(skb) < minheadroom) {
165 struct sk_buff *skb2 = skb_realloc_headroom(skb, minheadroom);
166 brvcc->copies_needed++;
169 brvcc->copies_failed++;
174 skb_push(skb, minheadroom);
175 if (brvcc->encaps == e_llc)
176 skb_copy_to_linear_data(skb, llc_oui_pid_pad, 10);
178 memset(skb->data, 0, 2);
179 #endif /* FASTER_VERSION */
182 ATM_SKB(skb)->vcc = atmvcc = brvcc->atmvcc;
183 DPRINTK("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, atmvcc, atmvcc->dev);
184 if (!atm_may_send(atmvcc, skb->truesize)) {
185 /* we free this here for now, because we cannot know in a higher
186 layer whether the skb point it supplied wasn't freed yet.
192 atomic_add(skb->truesize, &sk_atm(atmvcc)->sk_wmem_alloc);
193 ATM_SKB(skb)->atm_options = atmvcc->atm_options;
194 brdev->stats.tx_packets++;
195 brdev->stats.tx_bytes += skb->len;
196 atmvcc->send(atmvcc, skb);
200 static inline struct br2684_vcc *pick_outgoing_vcc(struct sk_buff *skb,
201 struct br2684_dev *brdev)
203 return list_empty(&brdev->brvccs) ? NULL :
204 list_entry_brvcc(brdev->brvccs.next); /* 1 vcc/dev right now */
207 static int br2684_start_xmit(struct sk_buff *skb, struct net_device *dev)
209 struct br2684_dev *brdev = BRPRIV(dev);
210 struct br2684_vcc *brvcc;
212 DPRINTK("br2684_start_xmit, skb->dst=%p\n", skb->dst);
213 read_lock(&devs_lock);
214 brvcc = pick_outgoing_vcc(skb, brdev);
216 DPRINTK("no vcc attached to dev %s\n", dev->name);
217 brdev->stats.tx_errors++;
218 brdev->stats.tx_carrier_errors++;
219 /* netif_stop_queue(dev); */
221 read_unlock(&devs_lock);
224 if (!br2684_xmit_vcc(skb, brdev, brvcc)) {
226 * We should probably use netif_*_queue() here, but that
227 * involves added complication. We need to walk before
230 /* don't free here! this pointer might be no longer valid!
233 brdev->stats.tx_errors++;
234 brdev->stats.tx_fifo_errors++;
236 read_unlock(&devs_lock);
240 static struct net_device_stats *br2684_get_stats(struct net_device *dev)
242 DPRINTK("br2684_get_stats\n");
243 return &BRPRIV(dev)->stats;
246 #ifdef FASTER_VERSION
248 * These mirror eth_header and eth_header_cache. They are not usually
249 * exported for use in modules, so we grab them from net_device
250 * after ether_setup() is done with it. Bit of a hack.
252 static int (*my_eth_header)(struct sk_buff *, struct net_device *,
253 unsigned short, void *, void *, unsigned);
254 static int (*my_eth_header_cache)(struct neighbour *, struct hh_cache *);
257 br2684_header(struct sk_buff *skb, struct net_device *dev,
258 unsigned short type, void *daddr, void *saddr, unsigned len)
261 int t = my_eth_header(skb, dev, type, daddr, saddr, len);
263 pad_before_eth = (u16 *) skb_push(skb, 2);
265 return dev->hard_header_len; /* or return 16; ? */
271 br2684_header_cache(struct neighbour *neigh, struct hh_cache *hh)
273 /* hh_data is 16 bytes long. if encaps is ether-llc we need 24, so
274 xmit will add the additional header part in that case */
275 u16 *pad_before_eth = (u16 *)(hh->hh_data);
276 int t = my_eth_header_cache(neigh, hh);
277 DPRINTK("br2684_header_cache, neigh=%p, hh_cache=%p\n", neigh, hh);
282 hh->hh_len = PADLEN + ETH_HLEN;
288 * This is similar to eth_type_trans, which cannot be used because of
289 * our dev->hard_header_len
291 static inline __be16 br_type_trans(struct sk_buff *skb, struct net_device *dev)
297 if (is_multicast_ether_addr(eth->h_dest)) {
298 if (!compare_ether_addr(eth->h_dest, dev->broadcast))
299 skb->pkt_type = PACKET_BROADCAST;
301 skb->pkt_type = PACKET_MULTICAST;
304 else if (compare_ether_addr(eth->h_dest, dev->dev_addr))
305 skb->pkt_type = PACKET_OTHERHOST;
307 if (ntohs(eth->h_proto) >= 1536)
313 * This is a magic hack to spot IPX packets. Older Novell breaks
314 * the protocol design and runs IPX over 802.3 without an 802.2 LLC
315 * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
316 * won't work for fault tolerant netware but does for the rest.
318 if (*(unsigned short *) rawp == 0xFFFF)
319 return htons(ETH_P_802_3);
324 return htons(ETH_P_802_2);
326 #endif /* FASTER_VERSION */
329 * We remember when the MAC gets set, so we don't override it later with
330 * the ESI of the ATM card of the first VC
332 static int (*my_eth_mac_addr)(struct net_device *, void *);
333 static int br2684_mac_addr(struct net_device *dev, void *p)
335 int err = my_eth_mac_addr(dev, p);
337 BRPRIV(dev)->mac_was_set = 1;
341 #ifdef CONFIG_ATM_BR2684_IPFILTER
342 /* this IOCTL is experimental. */
343 static int br2684_setfilt(struct atm_vcc *atmvcc, void __user *arg)
345 struct br2684_vcc *brvcc;
346 struct br2684_filter_set fs;
348 if (copy_from_user(&fs, arg, sizeof fs))
350 if (fs.ifspec.method != BR2684_FIND_BYNOTHING) {
352 * This is really a per-vcc thing, but we can also search
355 struct br2684_dev *brdev;
356 read_lock(&devs_lock);
357 brdev = BRPRIV(br2684_find_dev(&fs.ifspec));
358 if (brdev == NULL || list_empty(&brdev->brvccs) ||
359 brdev->brvccs.next != brdev->brvccs.prev) /* >1 VCC */
362 brvcc = list_entry_brvcc(brdev->brvccs.next);
363 read_unlock(&devs_lock);
367 brvcc = BR2684_VCC(atmvcc);
368 memcpy(&brvcc->filter, &fs.filter, sizeof(brvcc->filter));
372 /* Returns 1 if packet should be dropped */
374 packet_fails_filter(__be16 type, struct br2684_vcc *brvcc, struct sk_buff *skb)
376 if (brvcc->filter.netmask == 0)
377 return 0; /* no filter in place */
378 if (type == htons(ETH_P_IP) &&
379 (((struct iphdr *) (skb->data))->daddr & brvcc->filter.
380 netmask) == brvcc->filter.prefix)
382 if (type == htons(ETH_P_ARP))
384 /* TODO: we should probably filter ARPs too.. don't want to have
385 * them returning values that don't make sense, or is that ok?
389 #endif /* CONFIG_ATM_BR2684_IPFILTER */
391 static void br2684_close_vcc(struct br2684_vcc *brvcc)
393 DPRINTK("removing VCC %p from dev %p\n", brvcc, brvcc->device);
394 write_lock_irq(&devs_lock);
395 list_del(&brvcc->brvccs);
396 write_unlock_irq(&devs_lock);
397 brvcc->atmvcc->user_back = NULL; /* what about vcc->recvq ??? */
398 brvcc->old_push(brvcc->atmvcc, NULL); /* pass on the bad news */
400 module_put(THIS_MODULE);
403 /* when AAL5 PDU comes in: */
404 static void br2684_push(struct atm_vcc *atmvcc, struct sk_buff *skb)
406 struct br2684_vcc *brvcc = BR2684_VCC(atmvcc);
407 struct net_device *net_dev = brvcc->device;
408 struct br2684_dev *brdev = BRPRIV(net_dev);
409 int plen = sizeof(llc_oui_pid_pad) + ETH_HLEN;
411 DPRINTK("br2684_push\n");
413 if (unlikely(skb == NULL)) {
414 /* skb==NULL means VCC is being destroyed */
415 br2684_close_vcc(brvcc);
416 if (list_empty(&brdev->brvccs)) {
417 read_lock(&devs_lock);
418 list_del(&brdev->br2684_devs);
419 read_unlock(&devs_lock);
420 unregister_netdev(net_dev);
421 free_netdev(net_dev);
427 atm_return(atmvcc, skb->truesize);
428 DPRINTK("skb from brdev %p\n", brdev);
429 if (brvcc->encaps == e_llc) {
430 /* let us waste some time for checking the encapsulation.
431 Note, that only 7 char is checked so frames with a valid FCS
432 are also accepted (but FCS is not checked of course) */
433 if (memcmp(skb->data, llc_oui_pid_pad, 7)) {
434 brdev->stats.rx_errors++;
439 /* Strip FCS if present */
440 if (skb->len > 7 && skb->data[7] == 0x01)
441 __skb_trim(skb, skb->len - 4);
443 plen = PADLEN + ETH_HLEN; /* pad, dstmac,srcmac, ethtype */
444 /* first 2 chars should be 0 */
445 if (*((u16 *) (skb->data)) != 0) {
446 brdev->stats.rx_errors++;
451 if (skb->len < plen) {
452 brdev->stats.rx_errors++;
453 dev_kfree_skb(skb); /* dev_ not needed? */
457 #ifdef FASTER_VERSION
458 /* FIXME: tcpdump shows that pointer to mac header is 2 bytes earlier,
459 than should be. What else should I set? */
461 skb_set_mac_header(skb, -ETH_HLEN);
462 skb->pkt_type = PACKET_HOST;
463 #ifdef CONFIG_BR2684_FAST_TRANS
464 skb->protocol = ((u16 *) skb->data)[-1];
465 #else /* some protocols might require this: */
466 skb->protocol = br_type_trans(skb, net_dev);
467 #endif /* CONFIG_BR2684_FAST_TRANS */
469 skb_pull(skb, plen - ETH_HLEN);
470 skb->protocol = eth_type_trans(skb, net_dev);
471 #endif /* FASTER_VERSION */
472 #ifdef CONFIG_ATM_BR2684_IPFILTER
473 if (unlikely(packet_fails_filter(skb->protocol, brvcc, skb))) {
474 brdev->stats.rx_dropped++;
478 #endif /* CONFIG_ATM_BR2684_IPFILTER */
480 ATM_SKB(skb)->vcc = atmvcc; /* needed ? */
481 DPRINTK("received packet's protocol: %x\n", ntohs(skb->protocol));
483 if (unlikely(!(net_dev->flags & IFF_UP))) {
484 /* sigh, interface is down */
485 brdev->stats.rx_dropped++;
489 brdev->stats.rx_packets++;
490 brdev->stats.rx_bytes += skb->len;
491 memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data));
495 static int br2684_regvcc(struct atm_vcc *atmvcc, void __user *arg)
497 /* assign a vcc to a dev
498 Note: we do not have explicit unassign, but look at _push()
501 struct br2684_vcc *brvcc;
503 struct sk_buff_head *rq;
504 struct br2684_dev *brdev;
505 struct net_device *net_dev;
506 struct atm_backend_br2684 be;
509 if (copy_from_user(&be, arg, sizeof be))
511 brvcc = kzalloc(sizeof(struct br2684_vcc), GFP_KERNEL);
514 write_lock_irq(&devs_lock);
515 net_dev = br2684_find_dev(&be.ifspec);
516 if (net_dev == NULL) {
518 "br2684: tried to attach to non-existant device\n");
522 brdev = BRPRIV(net_dev);
523 if (atmvcc->push == NULL) {
527 if (!list_empty(&brdev->brvccs)) {
528 /* Only 1 VCC/dev right now */
532 if (be.fcs_in != BR2684_FCSIN_NO || be.fcs_out != BR2684_FCSOUT_NO ||
533 be.fcs_auto || be.has_vpiid || be.send_padding || (be.encaps !=
534 BR2684_ENCAPS_VC && be.encaps != BR2684_ENCAPS_LLC) ||
539 DPRINTK("br2684_regvcc vcc=%p, encaps=%d, brvcc=%p\n", atmvcc, be.encaps,
541 if (list_empty(&brdev->brvccs) && !brdev->mac_was_set) {
542 unsigned char *esi = atmvcc->dev->esi;
543 if (esi[0] | esi[1] | esi[2] | esi[3] | esi[4] | esi[5])
544 memcpy(net_dev->dev_addr, esi, net_dev->addr_len);
546 net_dev->dev_addr[2] = 1;
548 list_add(&brvcc->brvccs, &brdev->brvccs);
549 write_unlock_irq(&devs_lock);
550 brvcc->device = net_dev;
551 brvcc->atmvcc = atmvcc;
552 atmvcc->user_back = brvcc;
553 brvcc->encaps = (enum br2684_encaps) be.encaps;
554 brvcc->old_push = atmvcc->push;
556 atmvcc->push = br2684_push;
558 rq = &sk_atm(atmvcc)->sk_receive_queue;
560 spin_lock_irqsave(&rq->lock, flags);
561 if (skb_queue_empty(rq)) {
564 /* NULL terminate the list. */
565 rq->prev->next = NULL;
568 rq->prev = rq->next = (struct sk_buff *)rq;
570 spin_unlock_irqrestore(&rq->lock, flags);
573 struct sk_buff *next = skb->next;
575 skb->next = skb->prev = NULL;
576 BRPRIV(skb->dev)->stats.rx_bytes -= skb->len;
577 BRPRIV(skb->dev)->stats.rx_packets--;
578 br2684_push(atmvcc, skb);
582 __module_get(THIS_MODULE);
585 write_unlock_irq(&devs_lock);
590 static void br2684_setup(struct net_device *netdev)
592 struct br2684_dev *brdev = BRPRIV(netdev);
595 brdev->net_dev = netdev;
597 #ifdef FASTER_VERSION
598 my_eth_header = netdev->hard_header;
599 netdev->hard_header = br2684_header;
600 my_eth_header_cache = netdev->hard_header_cache;
601 netdev->hard_header_cache = br2684_header_cache;
602 netdev->hard_header_len = sizeof(llc_oui_pid_pad) + ETH_HLEN; /* 10 + 14 */
604 my_eth_mac_addr = netdev->set_mac_address;
605 netdev->set_mac_address = br2684_mac_addr;
606 netdev->hard_start_xmit = br2684_start_xmit;
607 netdev->get_stats = br2684_get_stats;
609 INIT_LIST_HEAD(&brdev->brvccs);
612 static int br2684_create(void __user *arg)
615 struct net_device *netdev;
616 struct br2684_dev *brdev;
617 struct atm_newif_br2684 ni;
619 DPRINTK("br2684_create\n");
621 if (copy_from_user(&ni, arg, sizeof ni)) {
624 if (ni.media != BR2684_MEDIA_ETHERNET || ni.mtu != 1500) {
628 netdev = alloc_netdev(sizeof(struct br2684_dev),
629 ni.ifname[0] ? ni.ifname : "nas%d",
634 brdev = BRPRIV(netdev);
636 DPRINTK("registered netdev %s\n", netdev->name);
637 /* open, stop, do_ioctl ? */
638 err = register_netdev(netdev);
640 printk(KERN_ERR "br2684_create: register_netdev failed\n");
645 write_lock_irq(&devs_lock);
646 brdev->number = list_empty(&br2684_devs) ? 1 :
647 BRPRIV(list_entry_brdev(br2684_devs.prev))->number + 1;
648 list_add_tail(&brdev->br2684_devs, &br2684_devs);
649 write_unlock_irq(&devs_lock);
654 * This handles ioctls actually performed on our vcc - we must return
655 * -ENOIOCTLCMD for any unrecognized ioctl
657 static int br2684_ioctl(struct socket *sock, unsigned int cmd,
660 struct atm_vcc *atmvcc = ATM_SD(sock);
661 void __user *argp = (void __user *)arg;
666 case ATM_NEWBACKENDIF: {
668 err = get_user(b, (atm_backend_t __user *) argp);
671 if (b != ATM_BACKEND_BR2684)
673 if (!capable(CAP_NET_ADMIN))
675 if (cmd == ATM_SETBACKEND)
676 return br2684_regvcc(atmvcc, argp);
678 return br2684_create(argp);
680 #ifdef CONFIG_ATM_BR2684_IPFILTER
682 if (atmvcc->push != br2684_push)
684 if (!capable(CAP_NET_ADMIN))
686 err = br2684_setfilt(atmvcc, argp);
688 #endif /* CONFIG_ATM_BR2684_IPFILTER */
693 static struct atm_ioctl br2684_ioctl_ops = {
694 .owner = THIS_MODULE,
695 .ioctl = br2684_ioctl,
699 #ifdef CONFIG_PROC_FS
700 static void *br2684_seq_start(struct seq_file *seq, loff_t *pos)
702 read_lock(&devs_lock);
703 return seq_list_start(&br2684_devs, *pos);
706 static void *br2684_seq_next(struct seq_file *seq, void *v, loff_t *pos)
708 return seq_list_next(v, &br2684_devs, pos);
711 static void br2684_seq_stop(struct seq_file *seq, void *v)
713 read_unlock(&devs_lock);
716 static int br2684_seq_show(struct seq_file *seq, void *v)
718 const struct br2684_dev *brdev = list_entry(v, struct br2684_dev,
720 const struct net_device *net_dev = brdev->net_dev;
721 const struct br2684_vcc *brvcc;
723 seq_printf(seq, "dev %.16s: num=%d, mac=%02X:%02X:"
724 "%02X:%02X:%02X:%02X (%s)\n", net_dev->name,
726 net_dev->dev_addr[0],
727 net_dev->dev_addr[1],
728 net_dev->dev_addr[2],
729 net_dev->dev_addr[3],
730 net_dev->dev_addr[4],
731 net_dev->dev_addr[5],
732 brdev->mac_was_set ? "set" : "auto");
734 list_for_each_entry(brvcc, &brdev->brvccs, brvccs) {
735 seq_printf(seq, " vcc %d.%d.%d: encaps=%s"
736 #ifndef FASTER_VERSION
737 ", failed copies %u/%u"
738 #endif /* FASTER_VERSION */
739 "\n", brvcc->atmvcc->dev->number,
740 brvcc->atmvcc->vpi, brvcc->atmvcc->vci,
741 (brvcc->encaps == e_llc) ? "LLC" : "VC"
742 #ifndef FASTER_VERSION
743 , brvcc->copies_failed
744 , brvcc->copies_needed
745 #endif /* FASTER_VERSION */
747 #ifdef CONFIG_ATM_BR2684_IPFILTER
748 #define b1(var, byte) ((u8 *) &brvcc->filter.var)[byte]
749 #define bs(var) b1(var, 0), b1(var, 1), b1(var, 2), b1(var, 3)
750 if (brvcc->filter.netmask != 0)
751 seq_printf(seq, " filter=%d.%d.%d.%d/"
753 bs(prefix), bs(netmask));
756 #endif /* CONFIG_ATM_BR2684_IPFILTER */
761 static struct seq_operations br2684_seq_ops = {
762 .start = br2684_seq_start,
763 .next = br2684_seq_next,
764 .stop = br2684_seq_stop,
765 .show = br2684_seq_show,
768 static int br2684_proc_open(struct inode *inode, struct file *file)
770 return seq_open(file, &br2684_seq_ops);
773 static const struct file_operations br2684_proc_ops = {
774 .owner = THIS_MODULE,
775 .open = br2684_proc_open,
778 .release = seq_release,
781 extern struct proc_dir_entry *atm_proc_root; /* from proc.c */
784 static int __init br2684_init(void)
786 #ifdef CONFIG_PROC_FS
787 struct proc_dir_entry *p;
788 if ((p = create_proc_entry("br2684", 0, atm_proc_root)) == NULL)
790 p->proc_fops = &br2684_proc_ops;
792 register_atm_ioctl(&br2684_ioctl_ops);
796 static void __exit br2684_exit(void)
798 struct net_device *net_dev;
799 struct br2684_dev *brdev;
800 struct br2684_vcc *brvcc;
801 deregister_atm_ioctl(&br2684_ioctl_ops);
803 #ifdef CONFIG_PROC_FS
804 remove_proc_entry("br2684", atm_proc_root);
807 while (!list_empty(&br2684_devs)) {
808 net_dev = list_entry_brdev(br2684_devs.next);
809 brdev = BRPRIV(net_dev);
810 while (!list_empty(&brdev->brvccs)) {
811 brvcc = list_entry_brvcc(brdev->brvccs.next);
812 br2684_close_vcc(brvcc);
815 list_del(&brdev->br2684_devs);
816 unregister_netdev(net_dev);
817 free_netdev(net_dev);
821 module_init(br2684_init);
822 module_exit(br2684_exit);
824 MODULE_AUTHOR("Marcell GAL");
825 MODULE_DESCRIPTION("RFC2684 bridged protocols over ATM/AAL5");
826 MODULE_LICENSE("GPL");