2 #ifndef _LINUX_INTERRUPT_H
3 #define _LINUX_INTERRUPT_H
5 #include <linux/kernel.h>
6 #include <linux/linkage.h>
7 #include <linux/bitops.h>
8 #include <linux/preempt.h>
9 #include <linux/cpumask.h>
10 #include <linux/irqreturn.h>
11 #include <linux/hardirq.h>
12 #include <linux/sched.h>
13 #include <linux/irqflags.h>
14 #include <asm/atomic.h>
15 #include <asm/ptrace.h>
16 #include <asm/system.h>
19 * These correspond to the IORESOURCE_IRQ_* defines in
20 * linux/ioport.h to select the interrupt line behaviour. When
21 * requesting an interrupt without specifying a IRQF_TRIGGER, the
22 * setting should be assumed to be "as already configured", which
23 * may be as per machine or firmware initialisation.
25 #define IRQF_TRIGGER_NONE 0x00000000
26 #define IRQF_TRIGGER_RISING 0x00000001
27 #define IRQF_TRIGGER_FALLING 0x00000002
28 #define IRQF_TRIGGER_HIGH 0x00000004
29 #define IRQF_TRIGGER_LOW 0x00000008
30 #define IRQF_TRIGGER_MASK (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
31 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
32 #define IRQF_TRIGGER_PROBE 0x00000010
35 * These flags used only by the kernel as part of the
36 * irq handling routines.
38 * IRQF_DISABLED - keep irqs disabled when calling the action handler
39 * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
40 * IRQF_SHARED - allow sharing the irq among several devices
41 * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
42 * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
43 * IRQF_PERCPU - Interrupt is per cpu
44 * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
45 * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
46 * registered first in an shared interrupt is considered for
47 * performance reasons)
49 #define IRQF_DISABLED 0x00000020
50 #define IRQF_SAMPLE_RANDOM 0x00000040
51 #define IRQF_SHARED 0x00000080
52 #define IRQF_PROBE_SHARED 0x00000100
53 #define IRQF_TIMER 0x00000200
54 #define IRQF_PERCPU 0x00000400
55 #define IRQF_NOBALANCING 0x00000800
56 #define IRQF_IRQPOLL 0x00001000
58 typedef irqreturn_t (*irq_handler_t)(int, void *);
61 irq_handler_t handler;
66 struct irqaction *next;
68 struct proc_dir_entry *dir;
71 extern irqreturn_t no_action(int cpl, void *dev_id);
72 extern int __must_check request_irq(unsigned int, irq_handler_t handler,
73 unsigned long, const char *, void *);
74 extern void free_irq(unsigned int, void *);
78 extern int __must_check devm_request_irq(struct device *dev, unsigned int irq,
79 irq_handler_t handler, unsigned long irqflags,
80 const char *devname, void *dev_id);
81 extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
84 * On lockdep we dont want to enable hardirqs in hardirq
85 * context. Use local_irq_enable_in_hardirq() to annotate
86 * kernel code that has to do this nevertheless (pretty much
87 * the only valid case is for old/broken hardware that is
90 * NOTE: in theory this might break fragile code that relies
91 * on hardirq delivery - in practice we dont seem to have such
92 * places left. So the only effect should be slightly increased
96 # define local_irq_enable_in_hardirq() do { } while (0)
98 # define local_irq_enable_in_hardirq() local_irq_enable()
101 extern void disable_irq_nosync(unsigned int irq);
102 extern void disable_irq(unsigned int irq);
103 extern void enable_irq(unsigned int irq);
105 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
107 extern cpumask_t irq_default_affinity;
109 extern int irq_set_affinity(unsigned int irq, cpumask_t cpumask);
110 extern int irq_can_set_affinity(unsigned int irq);
111 extern int irq_select_affinity(unsigned int irq);
113 #else /* CONFIG_SMP */
115 static inline int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
120 static inline int irq_can_set_affinity(unsigned int irq)
125 static inline int irq_select_affinity(unsigned int irq) { return 0; }
127 #endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
129 #ifdef CONFIG_GENERIC_HARDIRQS
131 * Special lockdep variants of irq disabling/enabling.
132 * These should be used for locking constructs that
133 * know that a particular irq context which is disabled,
134 * and which is the only irq-context user of a lock,
135 * that it's safe to take the lock in the irq-disabled
136 * section without disabling hardirqs.
138 * On !CONFIG_LOCKDEP they are equivalent to the normal
139 * irq disable/enable methods.
141 static inline void disable_irq_nosync_lockdep(unsigned int irq)
143 disable_irq_nosync(irq);
144 #ifdef CONFIG_LOCKDEP
149 static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq, unsigned long *flags)
151 disable_irq_nosync(irq);
152 #ifdef CONFIG_LOCKDEP
153 local_irq_save(*flags);
157 static inline void disable_irq_lockdep(unsigned int irq)
160 #ifdef CONFIG_LOCKDEP
165 static inline void enable_irq_lockdep(unsigned int irq)
167 #ifdef CONFIG_LOCKDEP
173 static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long *flags)
175 #ifdef CONFIG_LOCKDEP
176 local_irq_restore(*flags);
181 /* IRQ wakeup (PM) control: */
182 extern int set_irq_wake(unsigned int irq, unsigned int on);
184 static inline int enable_irq_wake(unsigned int irq)
186 return set_irq_wake(irq, 1);
189 static inline int disable_irq_wake(unsigned int irq)
191 return set_irq_wake(irq, 0);
194 #else /* !CONFIG_GENERIC_HARDIRQS */
196 * NOTE: non-genirq architectures, if they want to support the lock
197 * validator need to define the methods below in their asm/irq.h
198 * files, under an #ifdef CONFIG_LOCKDEP section.
200 #ifndef CONFIG_LOCKDEP
201 # define disable_irq_nosync_lockdep(irq) disable_irq_nosync(irq)
202 # define disable_irq_nosync_lockdep_irqsave(irq, flags) \
203 disable_irq_nosync(irq)
204 # define disable_irq_lockdep(irq) disable_irq(irq)
205 # define enable_irq_lockdep(irq) enable_irq(irq)
206 # define enable_irq_lockdep_irqrestore(irq, flags) \
210 static inline int enable_irq_wake(unsigned int irq)
215 static inline int disable_irq_wake(unsigned int irq)
219 #endif /* CONFIG_GENERIC_HARDIRQS */
221 #ifndef __ARCH_SET_SOFTIRQ_PENDING
222 #define set_softirq_pending(x) (local_softirq_pending() = (x))
223 #define or_softirq_pending(x) (local_softirq_pending() |= (x))
227 * Temporary defines for UP kernels, until all code gets fixed.
230 static inline void __deprecated cli(void)
234 static inline void __deprecated sti(void)
238 static inline void __deprecated save_flags(unsigned long *x)
240 local_save_flags(*x);
242 #define save_flags(x) save_flags(&x)
243 static inline void __deprecated restore_flags(unsigned long x)
245 local_irq_restore(x);
248 static inline void __deprecated save_and_cli(unsigned long *x)
252 #define save_and_cli(x) save_and_cli(&x)
253 #endif /* CONFIG_SMP */
255 /* Some architectures might implement lazy enabling/disabling of
256 * interrupts. In some cases, such as stop_machine, we might want
257 * to ensure that after a local_irq_disable(), interrupts have
258 * really been disabled in hardware. Such architectures need to
259 * implement the following hook.
261 #ifndef hard_irq_disable
262 #define hard_irq_disable() do { } while(0)
265 /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
266 frequency threaded job scheduling. For almost all the purposes
267 tasklets are more than enough. F.e. all serial device BHs et
268 al. should be converted to tasklets, not to softirqs.
280 #ifdef CONFIG_HIGH_RES_TIMERS
283 RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */
286 /* softirq mask and active fields moved to irq_cpustat_t in
287 * asm/hardirq.h to get better cache usage. KAO
290 struct softirq_action
292 void (*action)(struct softirq_action *);
295 asmlinkage void do_softirq(void);
296 asmlinkage void __do_softirq(void);
297 extern void open_softirq(int nr, void (*action)(struct softirq_action *));
298 extern void softirq_init(void);
299 #define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0)
300 extern void raise_softirq_irqoff(unsigned int nr);
301 extern void raise_softirq(unsigned int nr);
304 /* Tasklets --- multithreaded analogue of BHs.
306 Main feature differing them of generic softirqs: tasklet
307 is running only on one CPU simultaneously.
309 Main feature differing them of BHs: different tasklets
310 may be run simultaneously on different CPUs.
313 * If tasklet_schedule() is called, then tasklet is guaranteed
314 to be executed on some cpu at least once after this.
315 * If the tasklet is already scheduled, but its excecution is still not
316 started, it will be executed only once.
317 * If this tasklet is already running on another CPU (or schedule is called
318 from tasklet itself), it is rescheduled for later.
319 * Tasklet is strictly serialized wrt itself, but not
320 wrt another tasklets. If client needs some intertask synchronization,
321 he makes it with spinlocks.
324 struct tasklet_struct
326 struct tasklet_struct *next;
329 void (*func)(unsigned long);
333 #define DECLARE_TASKLET(name, func, data) \
334 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
336 #define DECLARE_TASKLET_DISABLED(name, func, data) \
337 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
342 TASKLET_STATE_SCHED, /* Tasklet is scheduled for execution */
343 TASKLET_STATE_RUN /* Tasklet is running (SMP only) */
347 static inline int tasklet_trylock(struct tasklet_struct *t)
349 return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
352 static inline void tasklet_unlock(struct tasklet_struct *t)
354 smp_mb__before_clear_bit();
355 clear_bit(TASKLET_STATE_RUN, &(t)->state);
358 static inline void tasklet_unlock_wait(struct tasklet_struct *t)
360 while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); }
363 #define tasklet_trylock(t) 1
364 #define tasklet_unlock_wait(t) do { } while (0)
365 #define tasklet_unlock(t) do { } while (0)
368 extern void __tasklet_schedule(struct tasklet_struct *t);
370 static inline void tasklet_schedule(struct tasklet_struct *t)
372 if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
373 __tasklet_schedule(t);
376 extern void __tasklet_hi_schedule(struct tasklet_struct *t);
378 static inline void tasklet_hi_schedule(struct tasklet_struct *t)
380 if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
381 __tasklet_hi_schedule(t);
385 static inline void tasklet_disable_nosync(struct tasklet_struct *t)
387 atomic_inc(&t->count);
388 smp_mb__after_atomic_inc();
391 static inline void tasklet_disable(struct tasklet_struct *t)
393 tasklet_disable_nosync(t);
394 tasklet_unlock_wait(t);
398 static inline void tasklet_enable(struct tasklet_struct *t)
400 smp_mb__before_atomic_dec();
401 atomic_dec(&t->count);
404 static inline void tasklet_hi_enable(struct tasklet_struct *t)
406 smp_mb__before_atomic_dec();
407 atomic_dec(&t->count);
410 extern void tasklet_kill(struct tasklet_struct *t);
411 extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
412 extern void tasklet_init(struct tasklet_struct *t,
413 void (*func)(unsigned long), unsigned long data);
416 * Autoprobing for irqs:
418 * probe_irq_on() and probe_irq_off() provide robust primitives
419 * for accurate IRQ probing during kernel initialization. They are
420 * reasonably simple to use, are not "fooled" by spurious interrupts,
421 * and, unlike other attempts at IRQ probing, they do not get hung on
422 * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
424 * For reasonably foolproof probing, use them as follows:
426 * 1. clear and/or mask the device's internal interrupt.
428 * 3. irqs = probe_irq_on(); // "take over" all unassigned idle IRQs
429 * 4. enable the device and cause it to trigger an interrupt.
430 * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
431 * 6. irq = probe_irq_off(irqs); // get IRQ number, 0=none, negative=multiple
432 * 7. service the device to clear its pending interrupt.
433 * 8. loop again if paranoia is required.
435 * probe_irq_on() returns a mask of allocated irq's.
437 * probe_irq_off() takes the mask as a parameter,
438 * and returns the irq number which occurred,
439 * or zero if none occurred, or a negative irq number
440 * if more than one irq occurred.
443 #if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE)
444 static inline unsigned long probe_irq_on(void)
448 static inline int probe_irq_off(unsigned long val)
452 static inline unsigned int probe_irq_mask(unsigned long val)
457 extern unsigned long probe_irq_on(void); /* returns 0 on failure */
458 extern int probe_irq_off(unsigned long); /* returns 0 or negative on failure */
459 extern unsigned int probe_irq_mask(unsigned long); /* returns mask of ISA interrupts */
462 #ifdef CONFIG_PROC_FS
463 /* Initialize /proc/irq/ */
464 extern void init_irq_proc(void);
466 static inline void init_irq_proc(void)
471 int show_interrupts(struct seq_file *p, void *v);