1 #ifndef _SPARC64_HYPERVISOR_H
2 #define _SPARC64_HYPERVISOR_H
4 /* Sun4v hypervisor interfaces and defines.
6 * Hypervisor calls are made via traps to software traps number 0x80
7 * and above. Registers %o0 to %o5 serve as argument, status, and
8 * return value registers.
10 * There are two kinds of these traps. First there are the normal
11 * "fast traps" which use software trap 0x80 and encode the function
12 * to invoke by number in register %o5. Argument and return value
13 * handling is as follows:
15 * -----------------------------------------------
16 * | %o5 | function number | undefined |
17 * | %o0 | argument 0 | return status |
18 * | %o1 | argument 1 | return value 1 |
19 * | %o2 | argument 2 | return value 2 |
20 * | %o3 | argument 3 | return value 3 |
21 * | %o4 | argument 4 | return value 4 |
22 * -----------------------------------------------
24 * The second type are "hyper-fast traps" which encode the function
25 * number in the software trap number itself. So these use trap
26 * numbers > 0x80. The register usage for hyper-fast traps is as
29 * -----------------------------------------------
30 * | %o0 | argument 0 | return status |
31 * | %o1 | argument 1 | return value 1 |
32 * | %o2 | argument 2 | return value 2 |
33 * | %o3 | argument 3 | return value 3 |
34 * | %o4 | argument 4 | return value 4 |
35 * -----------------------------------------------
37 * Registers providing explicit arguments to the hypervisor calls
38 * are volatile across the call. Upon return their values are
39 * undefined unless explicitly specified as containing a particular
40 * return value by the specific call. The return status is always
41 * returned in register %o0, zero indicates a successful execution of
42 * the hypervisor call and other values indicate an error status as
43 * defined below. So, for example, if a hyper-fast trap takes
44 * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across
45 * the call and %o3, %o4, and %o5 would be preserved.
47 * If the hypervisor trap is invalid, or the fast trap function number
48 * is invalid, HV_EBADTRAP will be returned in %o0. Also, all 64-bits
49 * of the argument and return values are significant.
53 #define HV_FAST_TRAP 0x80
54 #define HV_MMU_MAP_ADDR_TRAP 0x83
55 #define HV_MMU_UNMAP_ADDR_TRAP 0x84
56 #define HV_TTRACE_ADDENTRY_TRAP 0x85
57 #define HV_CORE_TRAP 0xff
60 #define HV_EOK 0 /* Successful return */
61 #define HV_ENOCPU 1 /* Invalid CPU id */
62 #define HV_ENORADDR 2 /* Invalid real address */
63 #define HV_ENOINTR 3 /* Invalid interrupt id */
64 #define HV_EBADPGSZ 4 /* Invalid pagesize encoding */
65 #define HV_EBADTSB 5 /* Invalid TSB description */
66 #define HV_EINVAL 6 /* Invalid argument */
67 #define HV_EBADTRAP 7 /* Invalid function number */
68 #define HV_EBADALIGN 8 /* Invalid address alignment */
69 #define HV_EWOULDBLOCK 9 /* Cannot complete w/o blocking */
70 #define HV_ENOACCESS 10 /* No access to resource */
71 #define HV_EIO 11 /* I/O error */
72 #define HV_ECPUERROR 12 /* CPU in error state */
73 #define HV_ENOTSUPPORTED 13 /* Function not supported */
74 #define HV_ENOMAP 14 /* No mapping found */
75 #define HV_ETOOMANY 15 /* Too many items specified */
76 #define HV_ECHANNEL 16 /* Invalid LDC channel */
77 #define HV_EBUSY 17 /* Resource busy */
81 * FUNCTION: HV_FAST_MACH_EXIT
83 * ERRORS: This service does not return.
85 * Stop all CPUs in the virtual domain and place them into the stopped
86 * state. The 64-bit exit code may be passed to a service entity as
87 * the domain's exit status. On systems without a service entity, the
88 * domain will undergo a reset, and the boot firmware will be
91 * This function will never return to the guest that invokes it.
93 * Note: By convention an exit code of zero denotes a successful exit by
94 * the guest code. A non-zero exit code denotes a guest specific
98 #define HV_FAST_MACH_EXIT 0x00
101 extern void sun4v_mach_exit(unsigned long exit_core);
104 /* Domain services. */
108 * FUNCTION: HV_FAST_MACH_DESC
113 * ERRORS: HV_EBADALIGN Buffer is badly aligned
114 * HV_ENORADDR Buffer is to an illegal real address.
115 * HV_EINVAL Buffer length is too small for complete
116 * machine description.
118 * Copy the most current machine description into the buffer indicated
119 * by the real address in ARG0. The buffer provided must be 16 byte
120 * aligned. Upon success or HV_EINVAL, this service returns the
121 * actual size of the machine description in the RET1 return value.
123 * Note: A method of determining the appropriate buffer size for the
124 * machine description is to first call this service with a buffer
127 #define HV_FAST_MACH_DESC 0x01
130 extern unsigned long sun4v_mach_desc(unsigned long buffer_pa,
131 unsigned long buf_len,
132 unsigned long *real_buf_len);
137 * FUNCTION: HV_FAST_MACH_SIR
138 * ERRORS: This service does not return.
140 * Perform a software initiated reset of the virtual machine domain.
141 * All CPUs are captured as soon as possible, all hardware devices are
142 * returned to the entry default state, and the domain is restarted at
143 * the SIR (trap type 0x04) real trap table (RTBA) entry point on one
144 * of the CPUs. The single CPU restarted is selected as determined by
145 * platform specific policy. Memory is preserved across this
148 #define HV_FAST_MACH_SIR 0x02
151 extern void sun4v_mach_sir(void);
154 /* mach_set_watchdog()
156 * FUNCTION: HV_FAST_MACH_SET_WATCHDOG
157 * ARG0: timeout in milliseconds
159 * RET1: time remaining in milliseconds
161 * A guest uses this API to set a watchdog timer. Once the gues has set
162 * the timer, it must call the timer service again either to disable or
163 * postpone the expiration. If the timer expires before being reset or
164 * disabled, then the hypervisor take a platform specific action leading
165 * to guest termination within a bounded time period. The platform action
166 * may include recovery actions such as reporting the expiration to a
167 * Service Processor, and/or automatically restarting the gues.
169 * The 'timeout' parameter is specified in milliseconds, however the
170 * implementated granularity is given by the 'watchdog-resolution'
171 * property in the 'platform' node of the guest's machine description.
172 * The largest allowed timeout value is specified by the
173 * 'watchdog-max-timeout' property of the 'platform' node.
175 * If the 'timeout' argument is not zero, the watchdog timer is set to
176 * expire after a minimum of 'timeout' milliseconds.
178 * If the 'timeout' argument is zero, the watchdog timer is disabled.
180 * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout'
181 * property, the hypervisor leaves the watchdog timer state unchanged,
182 * and returns a status of EINVAL.
184 * The 'time remaining' return value is valid regardless of whether the
185 * return status is EOK or EINVAL. A non-zero return value indicates the
186 * number of milliseconds that were remaining until the timer was to expire.
187 * If less than one millisecond remains, the return value is '1'. If the
188 * watchdog timer was disabled at the time of the call, the return value is
191 * If the hypervisor cannot support the exact timeout value requested, but
192 * can support a larger timeout value, the hypervisor may round the actual
193 * timeout to a value larger than the requested timeout, consequently the
194 * 'time remaining' return value may be larger than the previously requested
197 * Any guest OS debugger should be aware that the watchdog service may be in
198 * use. Consequently, it is recommended that the watchdog service is
199 * disabled upon debugger entry (e.g. reaching a breakpoint), and then
200 * re-enabled upon returning to normal execution. The API has been designed
201 * with this in mind, and the 'time remaining' result of the disable call may
202 * be used directly as the timeout argument of the re-enable call.
204 #define HV_FAST_MACH_SET_WATCHDOG 0x05
207 extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout,
208 unsigned long *orig_timeout);
213 * CPUs represent devices that can execute software threads. A single
214 * chip that contains multiple cores or strands is represented as
215 * multiple CPUs with unique CPU identifiers. CPUs are exported to
216 * OBP via the machine description (and to the OS via the OBP device
217 * tree). CPUs are always in one of three states: stopped, running,
220 * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a
221 * CPU within a logical domain. Operations that are to be performed
222 * on multiple CPUs specify them via a CPU list. A CPU list is an
223 * array in real memory, of which each 16-bit word is a CPU ID. CPU
224 * lists are passed through the API as two arguments. The first is
225 * the number of entries (16-bit words) in the CPU list, and the
226 * second is the (real address) pointer to the CPU ID list.
231 * FUNCTION: HV_FAST_CPU_START
237 * ERRORS: ENOCPU Invalid CPU ID
238 * EINVAL Target CPU ID is not in the stopped state
239 * ENORADDR Invalid PC or RTBA real address
240 * EBADALIGN Unaligned PC or unaligned RTBA
241 * EWOULDBLOCK Starting resources are not available
243 * Start CPU with given CPU ID with PC in %pc and with a real trap
244 * base address value of RTBA. The indicated CPU must be in the
245 * stopped state. The supplied RTBA must be aligned on a 256 byte
246 * boundary. On successful completion, the specified CPU will be in
247 * the running state and will be supplied with "target ARG0" in %o0
250 #define HV_FAST_CPU_START 0x10
253 extern unsigned long sun4v_cpu_start(unsigned long cpuid,
261 * FUNCTION: HV_FAST_CPU_STOP
264 * ERRORS: ENOCPU Invalid CPU ID
265 * EINVAL Target CPU ID is the current cpu
266 * EINVAL Target CPU ID is not in the running state
267 * EWOULDBLOCK Stopping resources are not available
268 * ENOTSUPPORTED Not supported on this platform
270 * The specified CPU is stopped. The indicated CPU must be in the
271 * running state. On completion, it will be in the stopped state. It
272 * is not legal to stop the current CPU.
274 * Note: As this service cannot be used to stop the current cpu, this service
275 * may not be used to stop the last running CPU in a domain. To stop
276 * and exit a running domain, a guest must use the mach_exit() service.
278 #define HV_FAST_CPU_STOP 0x11
281 extern unsigned long sun4v_cpu_stop(unsigned long cpuid);
286 * FUNCTION: HV_FAST_CPU_YIELD
288 * ERRORS: No possible error.
290 * Suspend execution on the current CPU. Execution will resume when
291 * an interrupt (device, %stick_compare, or cross-call) is targeted to
292 * the CPU. On some CPUs, this API may be used by the hypervisor to
293 * save power by disabling hardware strands.
295 #define HV_FAST_CPU_YIELD 0x12
298 extern unsigned long sun4v_cpu_yield(void);
303 * FUNCTION: HV_FAST_CPU_QCONF
305 * ARG1: base real address
306 * ARG2: number of entries
308 * ERRORS: ENORADDR Invalid base real address
309 * EINVAL Invalid queue or number of entries is less
310 * than 2 or too large.
311 * EBADALIGN Base real address is not correctly aligned
314 * Configure the given queue to be placed at the given base real
315 * address, with the given number of entries. The number of entries
316 * must be a power of 2. The base real address must be aligned
317 * exactly to match the queue size. Each queue entry is 64 bytes
318 * long, so for example a 32 entry queue must be aligned on a 2048
319 * byte real address boundary.
321 * The specified queue is unconfigured if the number of entries is given
324 * For the current version of this API service, the argument queue is defined
328 * ----- -------------------------
329 * 0x3c cpu mondo queue
330 * 0x3d device mondo queue
331 * 0x3e resumable error queue
332 * 0x3f non-resumable error queue
334 * Note: The maximum number of entries for each queue for a specific cpu may
335 * be determined from the machine description.
337 #define HV_FAST_CPU_QCONF 0x14
338 #define HV_CPU_QUEUE_CPU_MONDO 0x3c
339 #define HV_CPU_QUEUE_DEVICE_MONDO 0x3d
340 #define HV_CPU_QUEUE_RES_ERROR 0x3e
341 #define HV_CPU_QUEUE_NONRES_ERROR 0x3f
344 extern unsigned long sun4v_cpu_qconf(unsigned long type,
345 unsigned long queue_paddr,
346 unsigned long num_queue_entries);
351 * FUNCTION: HV_FAST_CPU_QINFO
354 * RET1: base real address
355 * RET1: number of entries
356 * ERRORS: EINVAL Invalid queue
358 * Return the configuration info for the given queue. The base real
359 * address and number of entries of the defined queue are returned.
360 * The queue argument values are the same as for cpu_qconf() above.
362 * If the specified queue is a valid queue number, but no queue has
363 * been defined, the number of entries will be set to zero and the
364 * base real address returned is undefined.
366 #define HV_FAST_CPU_QINFO 0x15
370 * FUNCTION: HV_FAST_CPU_MONDO_SEND
372 * ARG2: data real address
374 * ERRORS: EBADALIGN Mondo data is not 64-byte aligned or CPU list
375 * is not 2-byte aligned.
376 * ENORADDR Invalid data mondo address, or invalid cpu list
378 * ENOCPU Invalid cpu in CPU list
379 * EWOULDBLOCK Some or all of the listed CPUs did not receive
381 * ECPUERROR One or more of the listed CPUs are in error
382 * state, use HV_FAST_CPU_STATE to see which ones
383 * EINVAL CPU list includes caller's CPU ID
385 * Send a mondo interrupt to the CPUs in the given CPU list with the
386 * 64-bytes at the given data real address. The data must be 64-byte
387 * aligned. The mondo data will be delivered to the cpu_mondo queues
388 * of the recipient CPUs.
390 * In all cases, error or not, the CPUs in the CPU list to which the
391 * mondo has been successfully delivered will be indicated by having
392 * their entry in CPU list updated with the value 0xffff.
394 #define HV_FAST_CPU_MONDO_SEND 0x42
397 extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa);
402 * FUNCTION: HV_FAST_CPU_MYID
405 * ERRORS: No errors defined.
407 * Return the hypervisor ID handle for the current CPU. Use by a
408 * virtual CPU to discover it's own identity.
410 #define HV_FAST_CPU_MYID 0x16
414 * FUNCTION: HV_FAST_CPU_STATE
418 * ERRORS: ENOCPU Invalid CPU ID
420 * Retrieve the current state of the CPU with the given CPU ID.
422 #define HV_FAST_CPU_STATE 0x17
423 #define HV_CPU_STATE_STOPPED 0x01
424 #define HV_CPU_STATE_RUNNING 0x02
425 #define HV_CPU_STATE_ERROR 0x03
428 extern long sun4v_cpu_state(unsigned long cpuid);
433 * FUNCTION: HV_FAST_CPU_SET_RTBA
436 * RET1: previous RTBA
437 * ERRORS: ENORADDR Invalid RTBA real address
438 * EBADALIGN RTBA is incorrectly aligned for a trap table
440 * Set the real trap base address of the local cpu to the given RTBA.
441 * The supplied RTBA must be aligned on a 256 byte boundary. Upon
442 * success the previous value of the RTBA is returned in RET1.
444 * Note: This service does not affect %tba
446 #define HV_FAST_CPU_SET_RTBA 0x18
450 * FUNCTION: HV_FAST_CPU_GET_RTBA
452 * RET1: previous RTBA
453 * ERRORS: No possible error.
455 * Returns the current value of RTBA in RET1.
457 #define HV_FAST_CPU_GET_RTBA 0x19
461 * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls.
464 struct hv_tsb_descr {
465 unsigned short pgsz_idx;
466 unsigned short assoc;
467 unsigned int num_ttes; /* in TTEs */
468 unsigned int ctx_idx;
469 unsigned int pgsz_mask;
470 unsigned long tsb_base;
474 #define HV_TSB_DESCR_PGSZ_IDX_OFFSET 0x00
475 #define HV_TSB_DESCR_ASSOC_OFFSET 0x02
476 #define HV_TSB_DESCR_NUM_TTES_OFFSET 0x04
477 #define HV_TSB_DESCR_CTX_IDX_OFFSET 0x08
478 #define HV_TSB_DESCR_PGSZ_MASK_OFFSET 0x0c
479 #define HV_TSB_DESCR_TSB_BASE_OFFSET 0x10
480 #define HV_TSB_DESCR_RESV_OFFSET 0x18
482 /* Page size bitmask. */
483 #define HV_PGSZ_MASK_8K (1 << 0)
484 #define HV_PGSZ_MASK_64K (1 << 1)
485 #define HV_PGSZ_MASK_512K (1 << 2)
486 #define HV_PGSZ_MASK_4MB (1 << 3)
487 #define HV_PGSZ_MASK_32MB (1 << 4)
488 #define HV_PGSZ_MASK_256MB (1 << 5)
489 #define HV_PGSZ_MASK_2GB (1 << 6)
490 #define HV_PGSZ_MASK_16GB (1 << 7)
492 /* Page size index. The value given in the TSB descriptor must correspond
493 * to the smallest page size specified in the pgsz_mask page size bitmask.
495 #define HV_PGSZ_IDX_8K 0
496 #define HV_PGSZ_IDX_64K 1
497 #define HV_PGSZ_IDX_512K 2
498 #define HV_PGSZ_IDX_4MB 3
499 #define HV_PGSZ_IDX_32MB 4
500 #define HV_PGSZ_IDX_256MB 5
501 #define HV_PGSZ_IDX_2GB 6
502 #define HV_PGSZ_IDX_16GB 7
504 /* MMU fault status area.
506 * MMU related faults have their status and fault address information
507 * placed into a memory region made available by privileged code. Each
508 * virtual processor must make a mmu_fault_area_conf() call to tell the
509 * hypervisor where that processor's fault status should be stored.
511 * The fault status block is a multiple of 64-bytes and must be aligned
512 * on a 64-byte boundary.
515 struct hv_fault_status {
516 unsigned long i_fault_type;
517 unsigned long i_fault_addr;
518 unsigned long i_fault_ctx;
519 unsigned long i_reserved[5];
520 unsigned long d_fault_type;
521 unsigned long d_fault_addr;
522 unsigned long d_fault_ctx;
523 unsigned long d_reserved[5];
526 #define HV_FAULT_I_TYPE_OFFSET 0x00
527 #define HV_FAULT_I_ADDR_OFFSET 0x08
528 #define HV_FAULT_I_CTX_OFFSET 0x10
529 #define HV_FAULT_D_TYPE_OFFSET 0x40
530 #define HV_FAULT_D_ADDR_OFFSET 0x48
531 #define HV_FAULT_D_CTX_OFFSET 0x50
533 #define HV_FAULT_TYPE_FAST_MISS 1
534 #define HV_FAULT_TYPE_FAST_PROT 2
535 #define HV_FAULT_TYPE_MMU_MISS 3
536 #define HV_FAULT_TYPE_INV_RA 4
537 #define HV_FAULT_TYPE_PRIV_VIOL 5
538 #define HV_FAULT_TYPE_PROT_VIOL 6
539 #define HV_FAULT_TYPE_NFO 7
540 #define HV_FAULT_TYPE_NFO_SEFF 8
541 #define HV_FAULT_TYPE_INV_VA 9
542 #define HV_FAULT_TYPE_INV_ASI 10
543 #define HV_FAULT_TYPE_NC_ATOMIC 11
544 #define HV_FAULT_TYPE_PRIV_ACT 12
545 #define HV_FAULT_TYPE_RESV1 13
546 #define HV_FAULT_TYPE_UNALIGNED 14
547 #define HV_FAULT_TYPE_INV_PGSZ 15
548 /* Values 16 --> -2 are reserved. */
549 #define HV_FAULT_TYPE_MULTIPLE -1
551 /* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(),
552 * and mmu_{map,unmap}_perm_addr().
554 #define HV_MMU_DMMU 0x01
555 #define HV_MMU_IMMU 0x02
556 #define HV_MMU_ALL (HV_MMU_DMMU | HV_MMU_IMMU)
559 * TRAP: HV_MMU_MAP_ADDR_TRAP
560 * ARG0: virtual address
563 * ARG3: flags (HV_MMU_{IMMU,DMMU})
564 * ERRORS: EINVAL Invalid virtual address, mmu context, or flags
565 * EBADPGSZ Invalid page size value
566 * ENORADDR Invalid real address in TTE
568 * Create a non-permanent mapping using the given TTE, virtual
569 * address, and mmu context. The flags argument determines which
570 * (data, or instruction, or both) TLB the mapping gets loaded into.
572 * The behavior is undefined if the valid bit is clear in the TTE.
574 * Note: This API call is for privileged code to specify temporary translation
575 * mappings without the need to create and manage a TSB.
579 * TRAP: HV_MMU_UNMAP_ADDR_TRAP
580 * ARG0: virtual address
582 * ARG2: flags (HV_MMU_{IMMU,DMMU})
583 * ERRORS: EINVAL Invalid virtual address, mmu context, or flags
585 * Demaps the given virtual address in the given mmu context on this
586 * CPU. This function is intended to be used to demap pages mapped
587 * with mmu_map_addr. This service is equivalent to invoking
588 * mmu_demap_page() with only the current CPU in the CPU list. The
589 * flags argument determines which (data, or instruction, or both) TLB
590 * the mapping gets unmapped from.
592 * Attempting to perform an unmap operation for a previously defined
593 * permanent mapping will have undefined results.
598 * FUNCTION: HV_FAST_MMU_TSB_CTX0
599 * ARG0: number of TSB descriptions
600 * ARG1: TSB descriptions pointer
602 * ERRORS: ENORADDR Invalid TSB descriptions pointer or
603 * TSB base within a descriptor
604 * EBADALIGN TSB descriptions pointer is not aligned
605 * to an 8-byte boundary, or TSB base
606 * within a descriptor is not aligned for
608 * EBADPGSZ Invalid page size in a TSB descriptor
609 * EBADTSB Invalid associativity or size in a TSB
611 * EINVAL Invalid number of TSB descriptions, or
612 * invalid context index in a TSB
613 * descriptor, or index page size not
614 * equal to smallest page size in page
615 * size bitmask field.
617 * Configures the TSBs for the current CPU for virtual addresses with
618 * context zero. The TSB descriptions pointer is a pointer to an
619 * array of the given number of TSB descriptions.
621 * Note: The maximum number of TSBs available to a virtual CPU is given by the
622 * mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the
623 * machine description.
625 #define HV_FAST_MMU_TSB_CTX0 0x20
628 extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions,
629 unsigned long tsb_desc_ra);
634 * FUNCTION: HV_FAST_MMU_TSB_CTXNON0
635 * ARG0: number of TSB descriptions
636 * ARG1: TSB descriptions pointer
638 * ERRORS: Same as for mmu_tsb_ctx0() above.
640 * Configures the TSBs for the current CPU for virtual addresses with
641 * non-zero contexts. The TSB descriptions pointer is a pointer to an
642 * array of the given number of TSB descriptions.
644 * Note: A maximum of 16 TSBs may be specified in the TSB description list.
646 #define HV_FAST_MMU_TSB_CTXNON0 0x21
650 * FUNCTION: HV_FAST_MMU_DEMAP_PAGE
651 * ARG0: reserved, must be zero
652 * ARG1: reserved, must be zero
653 * ARG2: virtual address
655 * ARG4: flags (HV_MMU_{IMMU,DMMU})
657 * ERRORS: EINVAL Invalid virutal address, context, or
659 * ENOTSUPPORTED ARG0 or ARG1 is non-zero
661 * Demaps any page mapping of the given virtual address in the given
662 * mmu context for the current virtual CPU. Any virtually tagged
663 * caches are guaranteed to be kept consistent. The flags argument
664 * determines which TLB (instruction, or data, or both) participate in
667 * ARG0 and ARG1 are both reserved and must be set to zero.
669 #define HV_FAST_MMU_DEMAP_PAGE 0x22
673 * FUNCTION: HV_FAST_MMU_DEMAP_CTX
674 * ARG0: reserved, must be zero
675 * ARG1: reserved, must be zero
677 * ARG3: flags (HV_MMU_{IMMU,DMMU})
679 * ERRORS: EINVAL Invalid context or flags value
680 * ENOTSUPPORTED ARG0 or ARG1 is non-zero
682 * Demaps all non-permanent virtual page mappings previously specified
683 * for the given context for the current virtual CPU. Any virtual
684 * tagged caches are guaranteed to be kept consistent. The flags
685 * argument determines which TLB (instruction, or data, or both)
686 * participate in the operation.
688 * ARG0 and ARG1 are both reserved and must be set to zero.
690 #define HV_FAST_MMU_DEMAP_CTX 0x23
694 * FUNCTION: HV_FAST_MMU_DEMAP_ALL
695 * ARG0: reserved, must be zero
696 * ARG1: reserved, must be zero
697 * ARG2: flags (HV_MMU_{IMMU,DMMU})
699 * ERRORS: EINVAL Invalid flags value
700 * ENOTSUPPORTED ARG0 or ARG1 is non-zero
702 * Demaps all non-permanent virtual page mappings previously specified
703 * for the current virtual CPU. Any virtual tagged caches are
704 * guaranteed to be kept consistent. The flags argument determines
705 * which TLB (instruction, or data, or both) participate in the
708 * ARG0 and ARG1 are both reserved and must be set to zero.
710 #define HV_FAST_MMU_DEMAP_ALL 0x24
712 /* mmu_map_perm_addr()
714 * FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR
715 * ARG0: virtual address
716 * ARG1: reserved, must be zero
718 * ARG3: flags (HV_MMU_{IMMU,DMMU})
720 * ERRORS: EINVAL Invalid virutal address or flags value
721 * EBADPGSZ Invalid page size value
722 * ENORADDR Invalid real address in TTE
723 * ETOOMANY Too many mappings (max of 8 reached)
725 * Create a permanent mapping using the given TTE and virtual address
726 * for context 0 on the calling virtual CPU. A maximum of 8 such
727 * permanent mappings may be specified by privileged code. Mappings
728 * may be removed with mmu_unmap_perm_addr().
730 * The behavior is undefined if a TTE with the valid bit clear is given.
732 * Note: This call is used to specify address space mappings for which
733 * privileged code does not expect to receive misses. For example,
734 * this mechanism can be used to map kernel nucleus code and data.
736 #define HV_FAST_MMU_MAP_PERM_ADDR 0x25
739 extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr,
740 unsigned long set_to_zero,
742 unsigned long flags);
745 /* mmu_fault_area_conf()
747 * FUNCTION: HV_FAST_MMU_FAULT_AREA_CONF
750 * RET1: previous mmu fault area real address
751 * ERRORS: ENORADDR Invalid real address
752 * EBADALIGN Invalid alignment for fault area
754 * Configure the MMU fault status area for the calling CPU. A 64-byte
755 * aligned real address specifies where MMU fault status information
756 * is placed. The return value is the previously specified area, or 0
757 * for the first invocation. Specifying a fault area at real address
760 #define HV_FAST_MMU_FAULT_AREA_CONF 0x26
764 * FUNCTION: HV_FAST_MMU_ENABLE
766 * ARG1: return target address
768 * ERRORS: ENORADDR Invalid real address when disabling
770 * EBADALIGN The return target address is not
771 * aligned to an instruction.
772 * EINVAL The enable flag request the current
773 * operating mode (e.g. disable if already
776 * Enable or disable virtual address translation for the calling CPU
777 * within the virtual machine domain. If the enable flag is zero,
778 * translation is disabled, any non-zero value will enable
781 * When this function returns, the newly selected translation mode
782 * will be active. If the mmu is being enabled, then the return
783 * target address is a virtual address else it is a real address.
785 * Upon successful completion, control will be returned to the given
786 * return target address (ie. the cpu will jump to that address). On
787 * failure, the previous mmu mode remains and the trap simply returns
788 * as normal with the appropriate error code in RET0.
790 #define HV_FAST_MMU_ENABLE 0x27
792 /* mmu_unmap_perm_addr()
794 * FUNCTION: HV_FAST_MMU_UNMAP_PERM_ADDR
795 * ARG0: virtual address
796 * ARG1: reserved, must be zero
797 * ARG2: flags (HV_MMU_{IMMU,DMMU})
799 * ERRORS: EINVAL Invalid virutal address or flags value
800 * ENOMAP Specified mapping was not found
802 * Demaps any permanent page mapping (established via
803 * mmu_map_perm_addr()) at the given virtual address for context 0 on
804 * the current virtual CPU. Any virtual tagged caches are guaranteed
805 * to be kept consistent.
807 #define HV_FAST_MMU_UNMAP_PERM_ADDR 0x28
809 /* mmu_tsb_ctx0_info()
811 * FUNCTION: HV_FAST_MMU_TSB_CTX0_INFO
813 * ARG1: buffer pointer
815 * RET1: number of TSBs
816 * ERRORS: EINVAL Supplied buffer is too small
817 * EBADALIGN The buffer pointer is badly aligned
818 * ENORADDR Invalid real address for buffer pointer
820 * Return the TSB configuration as previous defined by mmu_tsb_ctx0()
821 * into the provided buffer. The size of the buffer is given in ARG1
822 * in terms of the number of TSB description entries.
824 * Upon return, RET1 always contains the number of TSB descriptions
825 * previously configured. If zero TSBs were configured, EOK is
826 * returned with RET1 containing 0.
828 #define HV_FAST_MMU_TSB_CTX0_INFO 0x29
830 /* mmu_tsb_ctxnon0_info()
832 * FUNCTION: HV_FAST_MMU_TSB_CTXNON0_INFO
834 * ARG1: buffer pointer
836 * RET1: number of TSBs
837 * ERRORS: EINVAL Supplied buffer is too small
838 * EBADALIGN The buffer pointer is badly aligned
839 * ENORADDR Invalid real address for buffer pointer
841 * Return the TSB configuration as previous defined by
842 * mmu_tsb_ctxnon0() into the provided buffer. The size of the buffer
843 * is given in ARG1 in terms of the number of TSB description entries.
845 * Upon return, RET1 always contains the number of TSB descriptions
846 * previously configured. If zero TSBs were configured, EOK is
847 * returned with RET1 containing 0.
849 #define HV_FAST_MMU_TSB_CTXNON0_INFO 0x2a
851 /* mmu_fault_area_info()
853 * FUNCTION: HV_FAST_MMU_FAULT_AREA_INFO
855 * RET1: fault area real address
856 * ERRORS: No errors defined.
858 * Return the currently defined MMU fault status area for the current
859 * CPU. The real address of the fault status area is returned in
860 * RET1, or 0 is returned in RET1 if no fault status area is defined.
862 * Note: mmu_fault_area_conf() may be called with the return value (RET1)
863 * from this service if there is a need to save and restore the fault
866 #define HV_FAST_MMU_FAULT_AREA_INFO 0x2b
868 /* Cache and Memory services. */
872 * FUNCTION: HV_FAST_MEM_SCRUB
876 * RET1: length scrubbed
877 * ERRORS: ENORADDR Invalid real address
878 * EBADALIGN Start address or length are not correctly
880 * EINVAL Length is zero
882 * Zero the memory contents in the range real address to real address
883 * plus length minus 1. Also, valid ECC will be generated for that
884 * memory address range. Scrubbing is started at the given real
885 * address, but may not scrub the entire given length. The actual
886 * length scrubbed will be returned in RET1.
888 * The real address and length must be aligned on an 8K boundary, or
889 * contain the start address and length from a sun4v error report.
891 * Note: There are two uses for this function. The first use is to block clear
892 * and initialize memory and the second is to scrub an u ncorrectable
893 * error reported via a resumable or non-resumable trap. The second
894 * use requires the arguments to be equal to the real address and length
895 * provided in a sun4v memory error report.
897 #define HV_FAST_MEM_SCRUB 0x31
901 * FUNCTION: HV_FAST_MEM_SYNC
905 * RET1: length synced
906 * ERRORS: ENORADDR Invalid real address
907 * EBADALIGN Start address or length are not correctly
909 * EINVAL Length is zero
911 * Force the next access within the real address to real address plus
912 * length minus 1 to be fetches from main system memory. Less than
913 * the given length may be synced, the actual amount synced is
914 * returned in RET1. The real address and length must be aligned on
917 #define HV_FAST_MEM_SYNC 0x32
919 /* Time of day services.
921 * The hypervisor maintains the time of day on a per-domain basis.
922 * Changing the time of day in one domain does not affect the time of
923 * day on any other domain.
925 * Time is described by a single unsigned 64-bit word which is the
926 * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1,
932 * FUNCTION: HV_FAST_TOD_GET
935 * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable
936 * ENOTSUPPORTED If TOD not supported on this platform
938 * Return the current time of day. May block if TOD access is
939 * temporarily not possible.
941 #define HV_FAST_TOD_GET 0x50
944 extern unsigned long sun4v_tod_get(unsigned long *time);
949 * FUNCTION: HV_FAST_TOD_SET
952 * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable
953 * ENOTSUPPORTED If TOD not supported on this platform
955 * The current time of day is set to the value specified in ARG0. May
956 * block if TOD access is temporarily not possible.
958 #define HV_FAST_TOD_SET 0x51
961 extern unsigned long sun4v_tod_set(unsigned long time);
964 /* Console services */
968 * FUNCTION: HV_FAST_CONS_GETCHAR
971 * ERRORS: EWOULDBLOCK No character available.
973 * Returns a character from the console device. If no character is
974 * available then an EWOULDBLOCK error is returned. If a character is
975 * available, then the returned status is EOK and the character value
978 * A virtual BREAK is represented by the 64-bit value -1.
980 * A virtual HUP signal is represented by the 64-bit value -2.
982 #define HV_FAST_CONS_GETCHAR 0x60
986 * FUNCTION: HV_FAST_CONS_PUTCHAR
989 * ERRORS: EINVAL Illegal character
990 * EWOULDBLOCK Output buffer currently full, would block
992 * Send a character to the console device. Only character values
993 * between 0 and 255 may be used. Values outside this range are
994 * invalid except for the 64-bit value -1 which is used to send a
997 #define HV_FAST_CONS_PUTCHAR 0x61
1000 * TRAP: HV_FAST_TRAP
1001 * FUNCTION: HV_FAST_CONS_READ
1002 * ARG0: buffer real address
1003 * ARG1: buffer size in bytes
1005 * RET1: bytes read or BREAK or HUP
1006 * ERRORS: EWOULDBLOCK No character available.
1008 * Reads characters into a buffer from the console device. If no
1009 * character is available then an EWOULDBLOCK error is returned.
1010 * If a character is available, then the returned status is EOK
1011 * and the number of bytes read into the given buffer is provided
1014 * A virtual BREAK is represented by the 64-bit RET1 value -1.
1016 * A virtual HUP signal is represented by the 64-bit RET1 value -2.
1018 * If BREAK or HUP are indicated, no bytes were read into buffer.
1020 #define HV_FAST_CONS_READ 0x62
1023 * TRAP: HV_FAST_TRAP
1024 * FUNCTION: HV_FAST_CONS_WRITE
1025 * ARG0: buffer real address
1026 * ARG1: buffer size in bytes
1028 * RET1: bytes written
1029 * ERRORS: EWOULDBLOCK Output buffer currently full, would block
1031 * Send a characters in buffer to the console device. Breaks must be
1032 * sent using con_putchar().
1034 #define HV_FAST_CONS_WRITE 0x63
1036 #ifndef __ASSEMBLY__
1037 extern long sun4v_con_getchar(long *status);
1038 extern long sun4v_con_putchar(long c);
1039 extern long sun4v_con_read(unsigned long buffer,
1041 unsigned long *bytes_read);
1042 extern unsigned long sun4v_con_write(unsigned long buffer,
1044 unsigned long *bytes_written);
1047 /* mach_set_soft_state()
1048 * TRAP: HV_FAST_TRAP
1049 * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE
1050 * ARG0: software state
1051 * ARG1: software state description pointer
1053 * ERRORS: EINVAL software state not valid or software state
1054 * description is not NULL terminated
1055 * ENORADDR software state description pointer is not a
1056 * valid real address
1057 * EBADALIGNED software state description is not correctly
1060 * This allows the guest to report it's soft state to the hypervisor. There
1061 * are two primary components to this state. The first part states whether
1062 * the guest software is running or not. The second containts optional
1063 * details specific to the software.
1065 * The software state argument is defined below in HV_SOFT_STATE_*, and
1066 * indicates whether the guest is operating normally or in a transitional
1069 * The software state description argument is a real address of a data buffer
1070 * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL
1071 * terminated 7-bit ASCII string of up to 31 characters not including the
1074 #define HV_FAST_MACH_SET_SOFT_STATE 0x70
1075 #define HV_SOFT_STATE_NORMAL 0x01
1076 #define HV_SOFT_STATE_TRANSITION 0x02
1078 #ifndef __ASSEMBLY__
1079 extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state,
1080 unsigned long msg_string_ra);
1083 /* mach_get_soft_state()
1084 * TRAP: HV_FAST_TRAP
1085 * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE
1086 * ARG0: software state description pointer
1088 * RET1: software state
1089 * ERRORS: ENORADDR software state description pointer is not a
1090 * valid real address
1091 * EBADALIGNED software state description is not correctly
1094 * Retrieve the current value of the guest's software state. The rules
1095 * for the software state pointer are the same as for mach_set_soft_state()
1098 #define HV_FAST_MACH_GET_SOFT_STATE 0x71
1100 /* Trap trace services.
1102 * The hypervisor provides a trap tracing capability for privileged
1103 * code running on each virtual CPU. Privileged code provides a
1104 * round-robin trap trace queue within which the hypervisor writes
1105 * 64-byte entries detailing hyperprivileged traps taken n behalf of
1106 * privileged code. This is provided as a debugging capability for
1109 * The trap trace control structure is 64-bytes long and placed at the
1110 * start (offset 0) of the trap trace buffer, and is described as
1113 #ifndef __ASSEMBLY__
1114 struct hv_trap_trace_control {
1115 unsigned long head_offset;
1116 unsigned long tail_offset;
1117 unsigned long __reserved[0x30 / sizeof(unsigned long)];
1120 #define HV_TRAP_TRACE_CTRL_HEAD_OFFSET 0x00
1121 #define HV_TRAP_TRACE_CTRL_TAIL_OFFSET 0x08
1123 /* The head offset is the offset of the most recently completed entry
1124 * in the trap-trace buffer. The tail offset is the offset of the
1125 * next entry to be written. The control structure is owned and
1126 * modified by the hypervisor. A guest may not modify the control
1127 * structure contents. Attempts to do so will result in undefined
1128 * behavior for the guest.
1130 * Each trap trace buffer entry is layed out as follows:
1132 #ifndef __ASSEMBLY__
1133 struct hv_trap_trace_entry {
1134 unsigned char type; /* Hypervisor or guest entry? */
1135 unsigned char hpstate; /* Hyper-privileged state */
1136 unsigned char tl; /* Trap level */
1137 unsigned char gl; /* Global register level */
1138 unsigned short tt; /* Trap type */
1139 unsigned short tag; /* Extended trap identifier */
1140 unsigned long tstate; /* Trap state */
1141 unsigned long tick; /* Tick */
1142 unsigned long tpc; /* Trap PC */
1143 unsigned long f1; /* Entry specific */
1144 unsigned long f2; /* Entry specific */
1145 unsigned long f3; /* Entry specific */
1146 unsigned long f4; /* Entry specific */
1149 #define HV_TRAP_TRACE_ENTRY_TYPE 0x00
1150 #define HV_TRAP_TRACE_ENTRY_HPSTATE 0x01
1151 #define HV_TRAP_TRACE_ENTRY_TL 0x02
1152 #define HV_TRAP_TRACE_ENTRY_GL 0x03
1153 #define HV_TRAP_TRACE_ENTRY_TT 0x04
1154 #define HV_TRAP_TRACE_ENTRY_TAG 0x06
1155 #define HV_TRAP_TRACE_ENTRY_TSTATE 0x08
1156 #define HV_TRAP_TRACE_ENTRY_TICK 0x10
1157 #define HV_TRAP_TRACE_ENTRY_TPC 0x18
1158 #define HV_TRAP_TRACE_ENTRY_F1 0x20
1159 #define HV_TRAP_TRACE_ENTRY_F2 0x28
1160 #define HV_TRAP_TRACE_ENTRY_F3 0x30
1161 #define HV_TRAP_TRACE_ENTRY_F4 0x38
1163 /* The type field is encoded as follows. */
1164 #define HV_TRAP_TYPE_UNDEF 0x00 /* Entry content undefined */
1165 #define HV_TRAP_TYPE_HV 0x01 /* Hypervisor trap entry */
1166 #define HV_TRAP_TYPE_GUEST 0xff /* Added via ttrace_addentry() */
1168 /* ttrace_buf_conf()
1169 * TRAP: HV_FAST_TRAP
1170 * FUNCTION: HV_FAST_TTRACE_BUF_CONF
1171 * ARG0: real address
1172 * ARG1: number of entries
1174 * RET1: number of entries
1175 * ERRORS: ENORADDR Invalid real address
1176 * EINVAL Size is too small
1177 * EBADALIGN Real address not aligned on 64-byte boundary
1179 * Requests hypervisor trap tracing and declares a virtual CPU's trap
1180 * trace buffer to the hypervisor. The real address supplies the real
1181 * base address of the trap trace queue and must be 64-byte aligned.
1182 * Specifying a value of 0 for the number of entries disables trap
1183 * tracing for the calling virtual CPU. The buffer allocated must be
1184 * sized for a power of two number of 64-byte trap trace entries plus
1185 * an initial 64-byte control structure.
1187 * This may be invoked any number of times so that a virtual CPU may
1188 * relocate a trap trace buffer or create "snapshots" of information.
1190 * If the real address is illegal or badly aligned, then trap tracing
1191 * is disabled and an error is returned.
1193 * Upon failure with EINVAL, this service call returns in RET1 the
1194 * minimum number of buffer entries required. Upon other failures
1195 * RET1 is undefined.
1197 #define HV_FAST_TTRACE_BUF_CONF 0x90
1199 /* ttrace_buf_info()
1200 * TRAP: HV_FAST_TRAP
1201 * FUNCTION: HV_FAST_TTRACE_BUF_INFO
1203 * RET1: real address
1205 * ERRORS: None defined.
1207 * Returns the size and location of the previously declared trap-trace
1208 * buffer. In the event that no buffer was previously defined, or the
1209 * buffer is disabled, this call will return a size of zero bytes.
1211 #define HV_FAST_TTRACE_BUF_INFO 0x91
1214 * TRAP: HV_FAST_TRAP
1215 * FUNCTION: HV_FAST_TTRACE_ENABLE
1218 * RET1: previous enable state
1219 * ERRORS: EINVAL No trap trace buffer currently defined
1221 * Enable or disable trap tracing, and return the previous enabled
1222 * state in RET1. Future systems may define various flags for the
1223 * enable argument (ARG0), for the moment a guest should pass
1224 * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all
1225 * tracing - which will ensure future compatability.
1227 #define HV_FAST_TTRACE_ENABLE 0x92
1230 * TRAP: HV_FAST_TRAP
1231 * FUNCTION: HV_FAST_TTRACE_FREEZE
1234 * RET1: previous freeze state
1235 * ERRORS: EINVAL No trap trace buffer currently defined
1237 * Freeze or unfreeze trap tracing, returning the previous freeze
1238 * state in RET1. A guest should pass a non-zero value to freeze and
1239 * a zero value to unfreeze all tracing. The returned previous state
1240 * is 0 for not frozen and 1 for frozen.
1242 #define HV_FAST_TTRACE_FREEZE 0x93
1244 /* ttrace_addentry()
1245 * TRAP: HV_TTRACE_ADDENTRY_TRAP
1246 * ARG0: tag (16-bits)
1252 * ERRORS: EINVAL No trap trace buffer currently defined
1254 * Add an entry to the trap trace buffer. Upon return only ARG0/RET0
1255 * is modified - none of the other registers holding arguments are
1256 * volatile across this hypervisor service.
1259 /* Core dump services.
1261 * Since the hypervisor viraulizes and thus obscures a lot of the
1262 * physical machine layout and state, traditional OS crash dumps can
1263 * be difficult to diagnose especially when the problem is a
1264 * configuration error of some sort.
1266 * The dump services provide an opaque buffer into which the
1267 * hypervisor can place it's internal state in order to assist in
1268 * debugging such situations. The contents are opaque and extremely
1269 * platform and hypervisor implementation specific. The guest, during
1270 * a core dump, requests that the hypervisor update any information in
1271 * the dump buffer in preparation to being dumped as part of the
1272 * domain's memory image.
1275 /* dump_buf_update()
1276 * TRAP: HV_FAST_TRAP
1277 * FUNCTION: HV_FAST_DUMP_BUF_UPDATE
1278 * ARG0: real address
1281 * RET1: required size of dump buffer
1282 * ERRORS: ENORADDR Invalid real address
1283 * EBADALIGN Real address is not aligned on a 64-byte
1285 * EINVAL Size is non-zero but less than minimum size
1287 * ENOTSUPPORTED Operation not supported on current logical
1290 * Declare a domain dump buffer to the hypervisor. The real address
1291 * provided for the domain dump buffer must be 64-byte aligned. The
1292 * size specifies the size of the dump buffer and may be larger than
1293 * the minimum size specified in the machine description. The
1294 * hypervisor will fill the dump buffer with opaque data.
1296 * Note: A guest may elect to include dump buffer contents as part of a crash
1297 * dump to assist with debugging. This function may be called any number
1298 * of times so that a guest may relocate a dump buffer, or create
1299 * "snapshots" of any dump-buffer information. Each call to
1300 * dump_buf_update() atomically declares the new dump buffer to the
1303 * A specified size of 0 unconfigures the dump buffer. If the real
1304 * address is illegal or badly aligned, then any currently active dump
1305 * buffer is disabled and an error is returned.
1307 * In the event that the call fails with EINVAL, RET1 contains the
1308 * minimum size requires by the hypervisor for a valid dump buffer.
1310 #define HV_FAST_DUMP_BUF_UPDATE 0x94
1313 * TRAP: HV_FAST_TRAP
1314 * FUNCTION: HV_FAST_DUMP_BUF_INFO
1316 * RET1: real address of current dump buffer
1317 * RET2: size of current dump buffer
1318 * ERRORS: No errors defined.
1320 * Return the currently configures dump buffer description. A
1321 * returned size of 0 bytes indicates an undefined dump buffer. In
1322 * this case the return address in RET1 is undefined.
1324 #define HV_FAST_DUMP_BUF_INFO 0x95
1326 /* Device interrupt services.
1328 * Device interrupts are allocated to system bus bridges by the hypervisor,
1329 * and described to OBP in the machine description. OBP then describes
1330 * these interrupts to the OS via properties in the device tree.
1334 * cpuid Unique opaque value which represents a target cpu.
1336 * devhandle Device handle. It uniquely identifies a device, and
1337 * consistes of the lower 28-bits of the hi-cell of the
1338 * first entry of the device's "reg" property in the
1341 * devino Device interrupt number. Specifies the relative
1342 * interrupt number within the device. The unique
1343 * combination of devhandle and devino are used to
1344 * identify a specific device interrupt.
1346 * Note: The devino value is the same as the values in the
1347 * "interrupts" property or "interrupt-map" property
1348 * in the OBP device tree for that device.
1350 * sysino System interrupt number. A 64-bit unsigned interger
1351 * representing a unique interrupt within a virtual
1354 * intr_state A flag representing the interrupt state for a given
1355 * sysino. The state values are defined below.
1357 * intr_enabled A flag representing the 'enabled' state for a given
1358 * sysino. The enable values are defined below.
1361 #define HV_INTR_STATE_IDLE 0 /* Nothing pending */
1362 #define HV_INTR_STATE_RECEIVED 1 /* Interrupt received by hardware */
1363 #define HV_INTR_STATE_DELIVERED 2 /* Interrupt delivered to queue */
1365 #define HV_INTR_DISABLED 0 /* sysino not enabled */
1366 #define HV_INTR_ENABLED 1 /* sysino enabled */
1368 /* intr_devino_to_sysino()
1369 * TRAP: HV_FAST_TRAP
1370 * FUNCTION: HV_FAST_INTR_DEVINO2SYSINO
1375 * ERRORS: EINVAL Invalid devhandle/devino
1377 * Converts a device specific interrupt number of the given
1378 * devhandle/devino into a system specific ino (sysino).
1380 #define HV_FAST_INTR_DEVINO2SYSINO 0xa0
1382 #ifndef __ASSEMBLY__
1383 extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle,
1384 unsigned long devino);
1387 /* intr_getenabled()
1388 * TRAP: HV_FAST_TRAP
1389 * FUNCTION: HV_FAST_INTR_GETENABLED
1392 * RET1: intr_enabled (HV_INTR_{DISABLED,ENABLED})
1393 * ERRORS: EINVAL Invalid sysino
1395 * Returns interrupt enabled state in RET1 for the interrupt defined
1396 * by the given sysino.
1398 #define HV_FAST_INTR_GETENABLED 0xa1
1400 #ifndef __ASSEMBLY__
1401 extern unsigned long sun4v_intr_getenabled(unsigned long sysino);
1404 /* intr_setenabled()
1405 * TRAP: HV_FAST_TRAP
1406 * FUNCTION: HV_FAST_INTR_SETENABLED
1408 * ARG1: intr_enabled (HV_INTR_{DISABLED,ENABLED})
1410 * ERRORS: EINVAL Invalid sysino or intr_enabled value
1412 * Set the 'enabled' state of the interrupt sysino.
1414 #define HV_FAST_INTR_SETENABLED 0xa2
1416 #ifndef __ASSEMBLY__
1417 extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled);
1421 * TRAP: HV_FAST_TRAP
1422 * FUNCTION: HV_FAST_INTR_GETSTATE
1425 * RET1: intr_state (HV_INTR_STATE_*)
1426 * ERRORS: EINVAL Invalid sysino
1428 * Returns current state of the interrupt defined by the given sysino.
1430 #define HV_FAST_INTR_GETSTATE 0xa3
1432 #ifndef __ASSEMBLY__
1433 extern unsigned long sun4v_intr_getstate(unsigned long sysino);
1437 * TRAP: HV_FAST_TRAP
1438 * FUNCTION: HV_FAST_INTR_SETSTATE
1440 * ARG1: intr_state (HV_INTR_STATE_*)
1442 * ERRORS: EINVAL Invalid sysino or intr_state value
1444 * Sets the current state of the interrupt described by the given sysino
1447 * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending
1448 * interrupt for sysino.
1450 #define HV_FAST_INTR_SETSTATE 0xa4
1452 #ifndef __ASSEMBLY__
1453 extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state);
1457 * TRAP: HV_FAST_TRAP
1458 * FUNCTION: HV_FAST_INTR_GETTARGET
1462 * ERRORS: EINVAL Invalid sysino
1464 * Returns CPU that is the current target of the interrupt defined by
1465 * the given sysino. The CPU value returned is undefined if the target
1466 * has not been set via intr_settarget().
1468 #define HV_FAST_INTR_GETTARGET 0xa5
1470 #ifndef __ASSEMBLY__
1471 extern unsigned long sun4v_intr_gettarget(unsigned long sysino);
1475 * TRAP: HV_FAST_TRAP
1476 * FUNCTION: HV_FAST_INTR_SETTARGET
1480 * ERRORS: EINVAL Invalid sysino
1481 * ENOCPU Invalid cpuid
1483 * Set the target CPU for the interrupt defined by the given sysino.
1485 #define HV_FAST_INTR_SETTARGET 0xa6
1487 #ifndef __ASSEMBLY__
1488 extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid);
1491 /* vintr_get_cookie()
1492 * TRAP: HV_FAST_TRAP
1493 * FUNCTION: HV_FAST_VINTR_GET_COOKIE
1494 * ARG0: device handle
1499 #define HV_FAST_VINTR_GET_COOKIE 0xa7
1501 /* vintr_set_cookie()
1502 * TRAP: HV_FAST_TRAP
1503 * FUNCTION: HV_FAST_VINTR_SET_COOKIE
1504 * ARG0: device handle
1509 #define HV_FAST_VINTR_SET_COOKIE 0xa8
1511 /* vintr_get_valid()
1512 * TRAP: HV_FAST_TRAP
1513 * FUNCTION: HV_FAST_VINTR_GET_VALID
1514 * ARG0: device handle
1519 #define HV_FAST_VINTR_GET_VALID 0xa9
1521 /* vintr_set_valid()
1522 * TRAP: HV_FAST_TRAP
1523 * FUNCTION: HV_FAST_VINTR_SET_VALID
1524 * ARG0: device handle
1529 #define HV_FAST_VINTR_SET_VALID 0xaa
1531 /* vintr_get_state()
1532 * TRAP: HV_FAST_TRAP
1533 * FUNCTION: HV_FAST_VINTR_GET_STATE
1534 * ARG0: device handle
1539 #define HV_FAST_VINTR_GET_STATE 0xab
1541 /* vintr_set_state()
1542 * TRAP: HV_FAST_TRAP
1543 * FUNCTION: HV_FAST_VINTR_SET_STATE
1544 * ARG0: device handle
1549 #define HV_FAST_VINTR_SET_STATE 0xac
1551 /* vintr_get_target()
1552 * TRAP: HV_FAST_TRAP
1553 * FUNCTION: HV_FAST_VINTR_GET_TARGET
1554 * ARG0: device handle
1559 #define HV_FAST_VINTR_GET_TARGET 0xad
1561 /* vintr_set_target()
1562 * TRAP: HV_FAST_TRAP
1563 * FUNCTION: HV_FAST_VINTR_SET_TARGET
1564 * ARG0: device handle
1569 #define HV_FAST_VINTR_SET_TARGET 0xae
1571 #ifndef __ASSEMBLY__
1572 extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle,
1573 unsigned long dev_ino,
1574 unsigned long *cookie);
1575 extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle,
1576 unsigned long dev_ino,
1577 unsigned long cookie);
1578 extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle,
1579 unsigned long dev_ino,
1580 unsigned long *valid);
1581 extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle,
1582 unsigned long dev_ino,
1583 unsigned long valid);
1584 extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle,
1585 unsigned long dev_ino,
1586 unsigned long *state);
1587 extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle,
1588 unsigned long dev_ino,
1589 unsigned long state);
1590 extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle,
1591 unsigned long dev_ino,
1592 unsigned long *cpuid);
1593 extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle,
1594 unsigned long dev_ino,
1595 unsigned long cpuid);
1600 * See the terminology descriptions in the device interrupt services
1601 * section above as those apply here too. Here are terminology
1602 * definitions specific to these PCI IO services:
1604 * tsbnum TSB number. Indentifies which io-tsb is used.
1605 * For this version of the specification, tsbnum
1608 * tsbindex TSB index. Identifies which entry in the TSB
1609 * is used. The first entry is zero.
1611 * tsbid A 64-bit aligned data structure which contains
1612 * a tsbnum and a tsbindex. Bits 63:32 contain the
1613 * tsbnum and bits 31:00 contain the tsbindex.
1615 * Use the HV_PCI_TSBID() macro to construct such
1618 * io_attributes IO attributes for IOMMU mappings. One of more
1619 * of the attritbute bits are stores in a 64-bit
1620 * value. The values are defined below.
1622 * r_addr 64-bit real address
1624 * pci_device PCI device address. A PCI device address identifies
1625 * a specific device on a specific PCI bus segment.
1626 * A PCI device address ia a 32-bit unsigned integer
1627 * with the following format:
1629 * 00000000.bbbbbbbb.dddddfff.00000000
1631 * Use the HV_PCI_DEVICE_BUILD() macro to construct
1635 * PCI configureation space offset. For conventional
1636 * PCI a value between 0 and 255. For extended
1637 * configuration space, a value between 0 and 4095.
1639 * Note: For PCI configuration space accesses, the offset
1640 * must be aligned to the access size.
1642 * error_flag A return value which specifies if the action succeeded
1643 * or failed. 0 means no error, non-0 means some error
1644 * occurred while performing the service.
1647 * Direction definition for pci_dma_sync(), defined
1648 * below in HV_PCI_SYNC_*.
1650 * io_page_list A list of io_page_addresses, an io_page_address is
1653 * io_page_list_p A pointer to an io_page_list.
1655 * "size based byte swap" - Some functions do size based byte swapping
1656 * which allows sw to access pointers and
1657 * counters in native form when the processor
1658 * operates in a different endianness than the
1659 * IO bus. Size-based byte swapping converts a
1660 * multi-byte field between big-endian and
1661 * little-endian format.
1664 #define HV_PCI_MAP_ATTR_READ 0x01
1665 #define HV_PCI_MAP_ATTR_WRITE 0x02
1667 #define HV_PCI_DEVICE_BUILD(b,d,f) \
1668 ((((b) & 0xff) << 16) | \
1669 (((d) & 0x1f) << 11) | \
1670 (((f) & 0x07) << 8))
1672 #define HV_PCI_TSBID(__tsb_num, __tsb_index) \
1673 ((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index)))
1675 #define HV_PCI_SYNC_FOR_DEVICE 0x01
1676 #define HV_PCI_SYNC_FOR_CPU 0x02
1679 * TRAP: HV_FAST_TRAP
1680 * FUNCTION: HV_FAST_PCI_IOMMU_MAP
1684 * ARG3: io_attributes
1685 * ARG4: io_page_list_p
1687 * RET1: #ttes mapped
1688 * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex/io_attributes
1689 * EBADALIGN Improperly aligned real address
1690 * ENORADDR Invalid real address
1692 * Create IOMMU mappings in the sun4v device defined by the given
1693 * devhandle. The mappings are created in the TSB defined by the
1694 * tsbnum component of the given tsbid. The first mapping is created
1695 * in the TSB i ndex defined by the tsbindex component of the given tsbid.
1696 * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex,
1697 * the second at tsbnum, tsbindex + 1, etc.
1699 * All mappings are created with the attributes defined by the io_attributes
1700 * argument. The page mapping addresses are described in the io_page_list
1701 * defined by the given io_page_list_p, which is a pointer to the io_page_list.
1702 * The first entry in the io_page_list is the address for the first iotte, the
1703 * 2nd for the 2nd iotte, and so on.
1705 * Each io_page_address in the io_page_list must be appropriately aligned.
1706 * #ttes must be greater than zero. For this version of the spec, the tsbnum
1707 * component of the given tsbid must be zero.
1709 * Returns the actual number of mappings creates, which may be less than
1710 * or equal to the argument #ttes. If the function returns a value which
1711 * is less than the #ttes, the caller may continus to call the function with
1712 * an updated tsbid, #ttes, io_page_list_p arguments until all pages are
1715 * Note: This function does not imply an iotte cache flush. The guest must
1716 * demap an entry before re-mapping it.
1718 #define HV_FAST_PCI_IOMMU_MAP 0xb0
1720 /* pci_iommu_demap()
1721 * TRAP: HV_FAST_TRAP
1722 * FUNCTION: HV_FAST_PCI_IOMMU_DEMAP
1727 * RET1: #ttes demapped
1728 * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex
1730 * Demap and flush IOMMU mappings in the device defined by the given
1731 * devhandle. Demaps up to #ttes entries in the TSB defined by the tsbnum
1732 * component of the given tsbid, starting at the TSB index defined by the
1733 * tsbindex component of the given tsbid.
1735 * For this version of the spec, the tsbnum of the given tsbid must be zero.
1736 * #ttes must be greater than zero.
1738 * Returns the actual number of ttes demapped, which may be less than or equal
1739 * to the argument #ttes. If #ttes demapped is less than #ttes, the caller
1740 * may continue to call this function with updated tsbid and #ttes arguments
1741 * until all pages are demapped.
1743 * Note: Entries do not have to be mapped to be demapped. A demap of an
1744 * unmapped page will flush the entry from the tte cache.
1746 #define HV_FAST_PCI_IOMMU_DEMAP 0xb1
1748 /* pci_iommu_getmap()
1749 * TRAP: HV_FAST_TRAP
1750 * FUNCTION: HV_FAST_PCI_IOMMU_GETMAP
1754 * RET1: io_attributes
1755 * RET2: real address
1756 * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex
1757 * ENOMAP Mapping is not valid, no translation exists
1759 * Read and return the mapping in the device described by the given devhandle
1760 * and tsbid. If successful, the io_attributes shall be returned in RET1
1761 * and the page address of the mapping shall be returned in RET2.
1763 * For this version of the spec, the tsbnum component of the given tsbid
1766 #define HV_FAST_PCI_IOMMU_GETMAP 0xb2
1768 /* pci_iommu_getbypass()
1769 * TRAP: HV_FAST_TRAP
1770 * FUNCTION: HV_FAST_PCI_IOMMU_GETBYPASS
1772 * ARG1: real address
1773 * ARG2: io_attributes
1776 * ERRORS: EINVAL Invalid devhandle/io_attributes
1777 * ENORADDR Invalid real address
1778 * ENOTSUPPORTED Function not supported in this implementation.
1780 * Create a "special" mapping in the device described by the given devhandle,
1781 * for the given real address and attributes. Return the IO address in RET1
1784 #define HV_FAST_PCI_IOMMU_GETBYPASS 0xb3
1787 * TRAP: HV_FAST_TRAP
1788 * FUNCTION: HV_FAST_PCI_CONFIG_GET
1791 * ARG2: pci_config_offset
1796 * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size
1797 * EBADALIGN pci_config_offset not size aligned
1798 * ENOACCESS Access to this offset is not permitted
1800 * Read PCI configuration space for the adapter described by the given
1801 * devhandle. Read size (1, 2, or 4) bytes of data from the given
1802 * pci_device, at pci_config_offset from the beginning of the device's
1803 * configuration space. If there was no error, RET1 is set to zero and
1804 * RET2 is set to the data read. Insignificant bits in RET2 are not
1805 * guarenteed to have any specific value and therefore must be ignored.
1807 * The data returned in RET2 is size based byte swapped.
1809 * If an error occurs during the read, set RET1 to a non-zero value. The
1810 * given pci_config_offset must be 'size' aligned.
1812 #define HV_FAST_PCI_CONFIG_GET 0xb4
1815 * TRAP: HV_FAST_TRAP
1816 * FUNCTION: HV_FAST_PCI_CONFIG_PUT
1819 * ARG2: pci_config_offset
1824 * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size
1825 * EBADALIGN pci_config_offset not size aligned
1826 * ENOACCESS Access to this offset is not permitted
1828 * Write PCI configuration space for the adapter described by the given
1829 * devhandle. Write size (1, 2, or 4) bytes of data in a single operation,
1830 * at pci_config_offset from the beginning of the device's configuration
1831 * space. The data argument contains the data to be written to configuration
1832 * space. Prior to writing, the data is size based byte swapped.
1834 * If an error occurs during the write access, do not generate an error
1835 * report, do set RET1 to a non-zero value. Otherwise RET1 is zero.
1836 * The given pci_config_offset must be 'size' aligned.
1838 * This function is permitted to read from offset zero in the configuration
1839 * space described by the given pci_device if necessary to ensure that the
1840 * write access to config space completes.
1842 #define HV_FAST_PCI_CONFIG_PUT 0xb5
1845 * TRAP: HV_FAST_TRAP
1846 * FUNCTION: HV_FAST_PCI_PEEK
1848 * ARG1: real address
1853 * ERRORS: EINVAL Invalid devhandle or size
1854 * EBADALIGN Improperly aligned real address
1855 * ENORADDR Bad real address
1856 * ENOACCESS Guest access prohibited
1858 * Attempt to read the IO address given by the given devhandle, real address,
1859 * and size. Size must be 1, 2, 4, or 8. The read is performed as a single
1860 * access operation using the given size. If an error occurs when reading
1861 * from the given location, do not generate an error report, but return a
1862 * non-zero value in RET1. If the read was successful, return zero in RET1
1863 * and return the actual data read in RET2. The data returned is size based
1866 * Non-significant bits in RET2 are not guarenteed to have any specific value
1867 * and therefore must be ignored. If RET1 is returned as non-zero, the data
1868 * value is not guarenteed to have any specific value and should be ignored.
1870 * The caller must have permission to read from the given devhandle, real
1871 * address, which must be an IO address. The argument real address must be a
1872 * size aligned address.
1874 * The hypervisor implementation of this function must block access to any
1875 * IO address that the guest does not have explicit permission to access.
1877 #define HV_FAST_PCI_PEEK 0xb6
1880 * TRAP: HV_FAST_TRAP
1881 * FUNCTION: HV_FAST_PCI_POKE
1883 * ARG1: real address
1889 * ERRORS: EINVAL Invalid devhandle, size, or pci_device
1890 * EBADALIGN Improperly aligned real address
1891 * ENORADDR Bad real address
1892 * ENOACCESS Guest access prohibited
1893 * ENOTSUPPORTED Function is not supported by implementation
1895 * Attempt to write data to the IO address given by the given devhandle,
1896 * real address, and size. Size must be 1, 2, 4, or 8. The write is
1897 * performed as a single access operation using the given size. Prior to
1898 * writing the data is size based swapped.
1900 * If an error occurs when writing to the given location, do not generate an
1901 * error report, but return a non-zero value in RET1. If the write was
1902 * successful, return zero in RET1.
1904 * pci_device describes the configuration address of the device being
1905 * written to. The implementation may safely read from offset 0 with
1906 * the configuration space of the device described by devhandle and
1907 * pci_device in order to guarantee that the write portion of the operation
1910 * Any error that occurs due to the read shall be reported using the normal
1911 * error reporting mechanisms .. the read error is not suppressed.
1913 * The caller must have permission to write to the given devhandle, real
1914 * address, which must be an IO address. The argument real address must be a
1915 * size aligned address. The caller must have permission to read from
1916 * the given devhandle, pci_device cofiguration space offset 0.
1918 * The hypervisor implementation of this function must block access to any
1919 * IO address that the guest does not have explicit permission to access.
1921 #define HV_FAST_PCI_POKE 0xb7
1924 * TRAP: HV_FAST_TRAP
1925 * FUNCTION: HV_FAST_PCI_DMA_SYNC
1927 * ARG1: real address
1929 * ARG3: io_sync_direction
1932 * ERRORS: EINVAL Invalid devhandle or io_sync_direction
1933 * ENORADDR Bad real address
1935 * Synchronize a memory region described by the given real address and size,
1936 * for the device defined by the given devhandle using the direction(s)
1937 * defined by the given io_sync_direction. The argument size is the size of
1938 * the memory region in bytes.
1940 * Return the actual number of bytes synchronized in the return value #synced,
1941 * which may be less than or equal to the argument size. If the return
1942 * value #synced is less than size, the caller must continue to call this
1943 * function with updated real address and size arguments until the entire
1944 * memory region is synchronized.
1946 #define HV_FAST_PCI_DMA_SYNC 0xb8
1948 /* PCI MSI services. */
1950 #define HV_MSITYPE_MSI32 0x00
1951 #define HV_MSITYPE_MSI64 0x01
1953 #define HV_MSIQSTATE_IDLE 0x00
1954 #define HV_MSIQSTATE_ERROR 0x01
1956 #define HV_MSIQ_INVALID 0x00
1957 #define HV_MSIQ_VALID 0x01
1959 #define HV_MSISTATE_IDLE 0x00
1960 #define HV_MSISTATE_DELIVERED 0x01
1962 #define HV_MSIVALID_INVALID 0x00
1963 #define HV_MSIVALID_VALID 0x01
1965 #define HV_PCIE_MSGTYPE_PME_MSG 0x18
1966 #define HV_PCIE_MSGTYPE_PME_ACK_MSG 0x1b
1967 #define HV_PCIE_MSGTYPE_CORR_MSG 0x30
1968 #define HV_PCIE_MSGTYPE_NONFATAL_MSG 0x31
1969 #define HV_PCIE_MSGTYPE_FATAL_MSG 0x33
1971 #define HV_MSG_INVALID 0x00
1972 #define HV_MSG_VALID 0x01
1975 * TRAP: HV_FAST_TRAP
1976 * FUNCTION: HV_FAST_PCI_MSIQ_CONF
1979 * ARG2: real address
1980 * ARG3: number of entries
1982 * ERRORS: EINVAL Invalid devhandle, msiqid or nentries
1983 * EBADALIGN Improperly aligned real address
1984 * ENORADDR Bad real address
1986 * Configure the MSI queue given by the devhandle and msiqid arguments,
1987 * and to be placed at the given real address and be of the given
1988 * number of entries. The real address must be aligned exactly to match
1989 * the queue size. Each queue entry is 64-bytes long, so f.e. a 32 entry
1990 * queue must be aligned on a 2048 byte real address boundary. The MSI-EQ
1991 * Head and Tail are initialized so that the MSI-EQ is 'empty'.
1993 * Implementation Note: Certain implementations have fixed sized queues. In
1994 * that case, number of entries must contain the correct
1997 #define HV_FAST_PCI_MSIQ_CONF 0xc0
2000 * TRAP: HV_FAST_TRAP
2001 * FUNCTION: HV_FAST_PCI_MSIQ_INFO
2005 * RET1: real address
2006 * RET2: number of entries
2007 * ERRORS: EINVAL Invalid devhandle or msiqid
2009 * Return the configuration information for the MSI queue described
2010 * by the given devhandle and msiqid. The base address of the queue
2011 * is returned in ARG1 and the number of entries is returned in ARG2.
2012 * If the queue is unconfigured, the real address is undefined and the
2013 * number of entries will be returned as zero.
2015 #define HV_FAST_PCI_MSIQ_INFO 0xc1
2017 /* pci_msiq_getvalid()
2018 * TRAP: HV_FAST_TRAP
2019 * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID
2023 * RET1: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID)
2024 * ERRORS: EINVAL Invalid devhandle or msiqid
2026 * Get the valid state of the MSI-EQ described by the given devhandle and
2029 #define HV_FAST_PCI_MSIQ_GETVALID 0xc2
2031 /* pci_msiq_setvalid()
2032 * TRAP: HV_FAST_TRAP
2033 * FUNCTION: HV_FAST_PCI_MSIQ_SETVALID
2036 * ARG2: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID)
2038 * ERRORS: EINVAL Invalid devhandle or msiqid or msiqvalid
2039 * value or MSI EQ is uninitialized
2041 * Set the valid state of the MSI-EQ described by the given devhandle and
2042 * msiqid to the given msiqvalid.
2044 #define HV_FAST_PCI_MSIQ_SETVALID 0xc3
2046 /* pci_msiq_getstate()
2047 * TRAP: HV_FAST_TRAP
2048 * FUNCTION: HV_FAST_PCI_MSIQ_GETSTATE
2052 * RET1: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
2053 * ERRORS: EINVAL Invalid devhandle or msiqid
2055 * Get the state of the MSI-EQ described by the given devhandle and
2058 #define HV_FAST_PCI_MSIQ_GETSTATE 0xc4
2060 /* pci_msiq_getvalid()
2061 * TRAP: HV_FAST_TRAP
2062 * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID
2065 * ARG2: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
2067 * ERRORS: EINVAL Invalid devhandle or msiqid or msiqstate
2068 * value or MSI EQ is uninitialized
2070 * Set the state of the MSI-EQ described by the given devhandle and
2071 * msiqid to the given msiqvalid.
2073 #define HV_FAST_PCI_MSIQ_SETSTATE 0xc5
2075 /* pci_msiq_gethead()
2076 * TRAP: HV_FAST_TRAP
2077 * FUNCTION: HV_FAST_PCI_MSIQ_GETHEAD
2082 * ERRORS: EINVAL Invalid devhandle or msiqid
2084 * Get the current MSI EQ queue head for the MSI-EQ described by the
2085 * given devhandle and msiqid.
2087 #define HV_FAST_PCI_MSIQ_GETHEAD 0xc6
2089 /* pci_msiq_sethead()
2090 * TRAP: HV_FAST_TRAP
2091 * FUNCTION: HV_FAST_PCI_MSIQ_SETHEAD
2096 * ERRORS: EINVAL Invalid devhandle or msiqid or msiqhead,
2097 * or MSI EQ is uninitialized
2099 * Set the current MSI EQ queue head for the MSI-EQ described by the
2100 * given devhandle and msiqid.
2102 #define HV_FAST_PCI_MSIQ_SETHEAD 0xc7
2104 /* pci_msiq_gettail()
2105 * TRAP: HV_FAST_TRAP
2106 * FUNCTION: HV_FAST_PCI_MSIQ_GETTAIL
2111 * ERRORS: EINVAL Invalid devhandle or msiqid
2113 * Get the current MSI EQ queue tail for the MSI-EQ described by the
2114 * given devhandle and msiqid.
2116 #define HV_FAST_PCI_MSIQ_GETTAIL 0xc8
2118 /* pci_msi_getvalid()
2119 * TRAP: HV_FAST_TRAP
2120 * FUNCTION: HV_FAST_PCI_MSI_GETVALID
2124 * RET1: msivalidstate
2125 * ERRORS: EINVAL Invalid devhandle or msinum
2127 * Get the current valid/enabled state for the MSI defined by the
2128 * given devhandle and msinum.
2130 #define HV_FAST_PCI_MSI_GETVALID 0xc9
2132 /* pci_msi_setvalid()
2133 * TRAP: HV_FAST_TRAP
2134 * FUNCTION: HV_FAST_PCI_MSI_SETVALID
2137 * ARG2: msivalidstate
2139 * ERRORS: EINVAL Invalid devhandle or msinum or msivalidstate
2141 * Set the current valid/enabled state for the MSI defined by the
2142 * given devhandle and msinum.
2144 #define HV_FAST_PCI_MSI_SETVALID 0xca
2146 /* pci_msi_getmsiq()
2147 * TRAP: HV_FAST_TRAP
2148 * FUNCTION: HV_FAST_PCI_MSI_GETMSIQ
2153 * ERRORS: EINVAL Invalid devhandle or msinum or MSI is unbound
2155 * Get the MSI EQ that the MSI defined by the given devhandle and
2156 * msinum is bound to.
2158 #define HV_FAST_PCI_MSI_GETMSIQ 0xcb
2160 /* pci_msi_setmsiq()
2161 * TRAP: HV_FAST_TRAP
2162 * FUNCTION: HV_FAST_PCI_MSI_SETMSIQ
2168 * ERRORS: EINVAL Invalid devhandle or msinum or msiqid
2170 * Set the MSI EQ that the MSI defined by the given devhandle and
2171 * msinum is bound to.
2173 #define HV_FAST_PCI_MSI_SETMSIQ 0xcc
2175 /* pci_msi_getstate()
2176 * TRAP: HV_FAST_TRAP
2177 * FUNCTION: HV_FAST_PCI_MSI_GETSTATE
2182 * ERRORS: EINVAL Invalid devhandle or msinum
2184 * Get the state of the MSI defined by the given devhandle and msinum.
2185 * If not initialized, return HV_MSISTATE_IDLE.
2187 #define HV_FAST_PCI_MSI_GETSTATE 0xcd
2189 /* pci_msi_setstate()
2190 * TRAP: HV_FAST_TRAP
2191 * FUNCTION: HV_FAST_PCI_MSI_SETSTATE
2196 * ERRORS: EINVAL Invalid devhandle or msinum or msistate
2198 * Set the state of the MSI defined by the given devhandle and msinum.
2200 #define HV_FAST_PCI_MSI_SETSTATE 0xce
2202 /* pci_msg_getmsiq()
2203 * TRAP: HV_FAST_TRAP
2204 * FUNCTION: HV_FAST_PCI_MSG_GETMSIQ
2209 * ERRORS: EINVAL Invalid devhandle or msgtype
2211 * Get the MSI EQ of the MSG defined by the given devhandle and msgtype.
2213 #define HV_FAST_PCI_MSG_GETMSIQ 0xd0
2215 /* pci_msg_setmsiq()
2216 * TRAP: HV_FAST_TRAP
2217 * FUNCTION: HV_FAST_PCI_MSG_SETMSIQ
2222 * ERRORS: EINVAL Invalid devhandle, msgtype, or msiqid
2224 * Set the MSI EQ of the MSG defined by the given devhandle and msgtype.
2226 #define HV_FAST_PCI_MSG_SETMSIQ 0xd1
2228 /* pci_msg_getvalid()
2229 * TRAP: HV_FAST_TRAP
2230 * FUNCTION: HV_FAST_PCI_MSG_GETVALID
2234 * RET1: msgvalidstate
2235 * ERRORS: EINVAL Invalid devhandle or msgtype
2237 * Get the valid/enabled state of the MSG defined by the given
2238 * devhandle and msgtype.
2240 #define HV_FAST_PCI_MSG_GETVALID 0xd2
2242 /* pci_msg_setvalid()
2243 * TRAP: HV_FAST_TRAP
2244 * FUNCTION: HV_FAST_PCI_MSG_SETVALID
2247 * ARG2: msgvalidstate
2249 * ERRORS: EINVAL Invalid devhandle or msgtype or msgvalidstate
2251 * Set the valid/enabled state of the MSG defined by the given
2252 * devhandle and msgtype.
2254 #define HV_FAST_PCI_MSG_SETVALID 0xd3
2256 /* Logical Domain Channel services. */
2258 #define LDC_CHANNEL_DOWN 0
2259 #define LDC_CHANNEL_UP 1
2260 #define LDC_CHANNEL_RESETTING 2
2263 * TRAP: HV_FAST_TRAP
2264 * FUNCTION: HV_FAST_LDC_TX_QCONF
2266 * ARG1: real address base of queue
2267 * ARG2: num entries in queue
2270 * Configure transmit queue for the LDC endpoint specified by the
2271 * given channel ID, to be placed at the given real address, and
2272 * be of the given num entries. Num entries must be a power of two.
2273 * The real address base of the queue must be aligned on the queue
2274 * size. Each queue entry is 64-bytes, so for example, a 32 entry
2275 * queue must be aligned on a 2048 byte real address boundary.
2277 * Upon configuration of a valid transmit queue the head and tail
2278 * pointers are set to a hypervisor specific identical value indicating
2279 * that the queue initially is empty.
2281 * The endpoint's transmit queue is un-configured if num entries is zero.
2283 * The maximum number of entries for each queue for a specific cpu may be
2284 * determined from the machine description. A transmit queue may be
2285 * specified even in the event that the LDC is down (peer endpoint has no
2286 * receive queue specified). Transmission will begin as soon as the peer
2287 * endpoint defines a receive queue.
2289 * It is recommended that a guest wait for a transmit queue to empty prior
2290 * to reconfiguring it, or un-configuring it. Re or un-configuring of a
2291 * non-empty transmit queue behaves exactly as defined above, however it
2292 * is undefined as to how many of the pending entries in the original queue
2293 * will be delivered prior to the re-configuration taking effect.
2294 * Furthermore, as the queue configuration causes a reset of the head and
2295 * tail pointers there is no way for a guest to determine how many entries
2296 * have been sent after the configuration operation.
2298 #define HV_FAST_LDC_TX_QCONF 0xe0
2301 * TRAP: HV_FAST_TRAP
2302 * FUNCTION: HV_FAST_LDC_TX_QINFO
2305 * RET1: real address base of queue
2306 * RET2: num entries in queue
2308 * Return the configuration info for the transmit queue of LDC endpoint
2309 * defined by the given channel ID. The real address is the currently
2310 * defined real address base of the defined queue, and num entries is the
2311 * size of the queue in terms of number of entries.
2313 * If the specified channel ID is a valid endpoint number, but no transmit
2314 * queue has been defined this service will return success, but with num
2315 * entries set to zero and the real address will have an undefined value.
2317 #define HV_FAST_LDC_TX_QINFO 0xe1
2319 /* ldc_tx_get_state()
2320 * TRAP: HV_FAST_TRAP
2321 * FUNCTION: HV_FAST_LDC_TX_GET_STATE
2326 * RET3: channel state
2328 * Return the transmit state, and the head and tail queue pointers, for
2329 * the transmit queue of the LDC endpoint defined by the given channel ID.
2330 * The head and tail values are the byte offset of the head and tail
2331 * positions of the transmit queue for the specified endpoint.
2333 #define HV_FAST_LDC_TX_GET_STATE 0xe2
2335 /* ldc_tx_set_qtail()
2336 * TRAP: HV_FAST_TRAP
2337 * FUNCTION: HV_FAST_LDC_TX_SET_QTAIL
2342 * Update the tail pointer for the transmit queue associated with the LDC
2343 * endpoint defined by the given channel ID. The tail offset specified
2344 * must be aligned on a 64 byte boundary, and calculated so as to increase
2345 * the number of pending entries on the transmit queue. Any attempt to
2346 * decrease the number of pending transmit queue entires is considered
2347 * an invalid tail offset and will result in an EINVAL error.
2349 * Since the tail of the transmit queue may not be moved backwards, the
2350 * transmit queue may be flushed by configuring a new transmit queue,
2351 * whereupon the hypervisor will configure the initial transmit head and
2352 * tail pointers to be equal.
2354 #define HV_FAST_LDC_TX_SET_QTAIL 0xe3
2357 * TRAP: HV_FAST_TRAP
2358 * FUNCTION: HV_FAST_LDC_RX_QCONF
2360 * ARG1: real address base of queue
2361 * ARG2: num entries in queue
2364 * Configure receive queue for the LDC endpoint specified by the
2365 * given channel ID, to be placed at the given real address, and
2366 * be of the given num entries. Num entries must be a power of two.
2367 * The real address base of the queue must be aligned on the queue
2368 * size. Each queue entry is 64-bytes, so for example, a 32 entry
2369 * queue must be aligned on a 2048 byte real address boundary.
2371 * The endpoint's transmit queue is un-configured if num entries is zero.
2373 * If a valid receive queue is specified for a local endpoint the LDC is
2374 * in the up state for the purpose of transmission to this endpoint.
2376 * The maximum number of entries for each queue for a specific cpu may be
2377 * determined from the machine description.
2379 * As receive queue configuration causes a reset of the queue's head and
2380 * tail pointers there is no way for a gues to determine how many entries
2381 * have been received between a preceeding ldc_get_rx_state() API call
2382 * and the completion of the configuration operation. It should be noted
2383 * that datagram delivery is not guarenteed via domain channels anyway,
2384 * and therefore any higher protocol should be resilient to datagram
2385 * loss if necessary. However, to overcome this specific race potential
2386 * it is recommended, for example, that a higher level protocol be employed
2387 * to ensure either retransmission, or ensure that no datagrams are pending
2388 * on the peer endpoint's transmit queue prior to the configuration process.
2390 #define HV_FAST_LDC_RX_QCONF 0xe4
2393 * TRAP: HV_FAST_TRAP
2394 * FUNCTION: HV_FAST_LDC_RX_QINFO
2397 * RET1: real address base of queue
2398 * RET2: num entries in queue
2400 * Return the configuration info for the receive queue of LDC endpoint
2401 * defined by the given channel ID. The real address is the currently
2402 * defined real address base of the defined queue, and num entries is the
2403 * size of the queue in terms of number of entries.
2405 * If the specified channel ID is a valid endpoint number, but no receive
2406 * queue has been defined this service will return success, but with num
2407 * entries set to zero and the real address will have an undefined value.
2409 #define HV_FAST_LDC_RX_QINFO 0xe5
2411 /* ldc_rx_get_state()
2412 * TRAP: HV_FAST_TRAP
2413 * FUNCTION: HV_FAST_LDC_RX_GET_STATE
2418 * RET3: channel state
2420 * Return the receive state, and the head and tail queue pointers, for
2421 * the receive queue of the LDC endpoint defined by the given channel ID.
2422 * The head and tail values are the byte offset of the head and tail
2423 * positions of the receive queue for the specified endpoint.
2425 #define HV_FAST_LDC_RX_GET_STATE 0xe6
2427 /* ldc_rx_set_qhead()
2428 * TRAP: HV_FAST_TRAP
2429 * FUNCTION: HV_FAST_LDC_RX_SET_QHEAD
2434 * Update the head pointer for the receive queue associated with the LDC
2435 * endpoint defined by the given channel ID. The head offset specified
2436 * must be aligned on a 64 byte boundary, and calculated so as to decrease
2437 * the number of pending entries on the receive queue. Any attempt to
2438 * increase the number of pending receive queue entires is considered
2439 * an invalid head offset and will result in an EINVAL error.
2441 * The receive queue may be flushed by setting the head offset equal
2442 * to the current tail offset.
2444 #define HV_FAST_LDC_RX_SET_QHEAD 0xe7
2446 /* LDC Map Table Entry. Each slot is defined by a translation table
2447 * entry, as specified by the LDC_MTE_* bits below, and a 64-bit
2448 * hypervisor invalidation cookie.
2450 #define LDC_MTE_PADDR 0x0fffffffffffe000 /* pa[55:13] */
2451 #define LDC_MTE_COPY_W 0x0000000000000400 /* copy write access */
2452 #define LDC_MTE_COPY_R 0x0000000000000200 /* copy read access */
2453 #define LDC_MTE_IOMMU_W 0x0000000000000100 /* IOMMU write access */
2454 #define LDC_MTE_IOMMU_R 0x0000000000000080 /* IOMMU read access */
2455 #define LDC_MTE_EXEC 0x0000000000000040 /* execute */
2456 #define LDC_MTE_WRITE 0x0000000000000020 /* read */
2457 #define LDC_MTE_READ 0x0000000000000010 /* write */
2458 #define LDC_MTE_SZALL 0x000000000000000f /* page size bits */
2459 #define LDC_MTE_SZ16GB 0x0000000000000007 /* 16GB page */
2460 #define LDC_MTE_SZ2GB 0x0000000000000006 /* 2GB page */
2461 #define LDC_MTE_SZ256MB 0x0000000000000005 /* 256MB page */
2462 #define LDC_MTE_SZ32MB 0x0000000000000004 /* 32MB page */
2463 #define LDC_MTE_SZ4MB 0x0000000000000003 /* 4MB page */
2464 #define LDC_MTE_SZ512K 0x0000000000000002 /* 512K page */
2465 #define LDC_MTE_SZ64K 0x0000000000000001 /* 64K page */
2466 #define LDC_MTE_SZ8K 0x0000000000000000 /* 8K page */
2468 #ifndef __ASSEMBLY__
2469 struct ldc_mtable_entry {
2471 unsigned long cookie;
2475 /* ldc_set_map_table()
2476 * TRAP: HV_FAST_TRAP
2477 * FUNCTION: HV_FAST_LDC_SET_MAP_TABLE
2479 * ARG1: table real address
2483 * Register the MTE table at the given table real address, with the
2484 * specified num entries, for the LDC indicated by the given channel
2487 #define HV_FAST_LDC_SET_MAP_TABLE 0xea
2489 /* ldc_get_map_table()
2490 * TRAP: HV_FAST_TRAP
2491 * FUNCTION: HV_FAST_LDC_GET_MAP_TABLE
2494 * RET1: table real address
2497 * Return the configuration of the current mapping table registered
2498 * for the given channel ID.
2500 #define HV_FAST_LDC_GET_MAP_TABLE 0xeb
2502 #define LDC_COPY_IN 0
2503 #define LDC_COPY_OUT 1
2506 * TRAP: HV_FAST_TRAP
2507 * FUNCTION: HV_FAST_LDC_COPY
2509 * ARG1: LDC_COPY_* direction code
2510 * ARG2: target real address
2511 * ARG3: local real address
2512 * ARG4: length in bytes
2514 * RET1: actual length in bytes
2516 #define HV_FAST_LDC_COPY 0xec
2518 #define LDC_MEM_READ 1
2519 #define LDC_MEM_WRITE 2
2520 #define LDC_MEM_EXEC 4
2523 * TRAP: HV_FAST_TRAP
2524 * FUNCTION: HV_FAST_LDC_MAPIN
2528 * RET1: real address
2529 * RET2: LDC_MEM_* permissions
2531 #define HV_FAST_LDC_MAPIN 0xed
2534 * TRAP: HV_FAST_TRAP
2535 * FUNCTION: HV_FAST_LDC_UNMAP
2536 * ARG0: real address
2539 #define HV_FAST_LDC_UNMAP 0xee
2542 * TRAP: HV_FAST_TRAP
2543 * FUNCTION: HV_FAST_LDC_REVOKE
2545 * ARG1: ldc_mtable_entry cookie
2548 #define HV_FAST_LDC_REVOKE 0xef
2550 #ifndef __ASSEMBLY__
2551 extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel,
2553 unsigned long num_entries);
2554 extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel,
2556 unsigned long *num_entries);
2557 extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel,
2558 unsigned long *head_off,
2559 unsigned long *tail_off,
2560 unsigned long *chan_state);
2561 extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel,
2562 unsigned long tail_off);
2563 extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel,
2565 unsigned long num_entries);
2566 extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel,
2568 unsigned long *num_entries);
2569 extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel,
2570 unsigned long *head_off,
2571 unsigned long *tail_off,
2572 unsigned long *chan_state);
2573 extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel,
2574 unsigned long head_off);
2575 extern unsigned long sun4v_ldc_set_map_table(unsigned long channel,
2577 unsigned long num_entries);
2578 extern unsigned long sun4v_ldc_get_map_table(unsigned long channel,
2580 unsigned long *num_entries);
2581 extern unsigned long sun4v_ldc_copy(unsigned long channel,
2582 unsigned long dir_code,
2583 unsigned long tgt_raddr,
2584 unsigned long lcl_raddr,
2586 unsigned long *actual_len);
2587 extern unsigned long sun4v_ldc_mapin(unsigned long channel,
2588 unsigned long cookie,
2590 unsigned long *perm);
2591 extern unsigned long sun4v_ldc_unmap(unsigned long ra);
2592 extern unsigned long sun4v_ldc_revoke(unsigned long cookie,
2593 unsigned long mte_cookie);
2596 /* Performance counter services. */
2598 #define HV_PERF_JBUS_PERF_CTRL_REG 0x00
2599 #define HV_PERF_JBUS_PERF_CNT_REG 0x01
2600 #define HV_PERF_DRAM_PERF_CTRL_REG_0 0x02
2601 #define HV_PERF_DRAM_PERF_CNT_REG_0 0x03
2602 #define HV_PERF_DRAM_PERF_CTRL_REG_1 0x04
2603 #define HV_PERF_DRAM_PERF_CNT_REG_1 0x05
2604 #define HV_PERF_DRAM_PERF_CTRL_REG_2 0x06
2605 #define HV_PERF_DRAM_PERF_CNT_REG_2 0x07
2606 #define HV_PERF_DRAM_PERF_CTRL_REG_3 0x08
2607 #define HV_PERF_DRAM_PERF_CNT_REG_3 0x09
2610 * TRAP: HV_FAST_TRAP
2611 * FUNCTION: HV_FAST_GET_PERFREG
2612 * ARG0: performance reg number
2614 * RET1: performance reg value
2615 * ERRORS: EINVAL Invalid performance register number
2616 * ENOACCESS No access allowed to performance counters
2618 * Read the value of the given DRAM/JBUS performance counter/control register.
2620 #define HV_FAST_GET_PERFREG 0x100
2623 * TRAP: HV_FAST_TRAP
2624 * FUNCTION: HV_FAST_SET_PERFREG
2625 * ARG0: performance reg number
2626 * ARG1: performance reg value
2628 * ERRORS: EINVAL Invalid performance register number
2629 * ENOACCESS No access allowed to performance counters
2631 * Write the given performance reg value to the given DRAM/JBUS
2632 * performance counter/control register.
2634 #define HV_FAST_SET_PERFREG 0x101
2636 /* MMU statistics services.
2638 * The hypervisor maintains MMU statistics and privileged code provides
2639 * a buffer where these statistics can be collected. It is continually
2640 * updated once configured. The layout is as follows:
2642 #ifndef __ASSEMBLY__
2643 struct hv_mmu_statistics {
2644 unsigned long immu_tsb_hits_ctx0_8k_tte;
2645 unsigned long immu_tsb_ticks_ctx0_8k_tte;
2646 unsigned long immu_tsb_hits_ctx0_64k_tte;
2647 unsigned long immu_tsb_ticks_ctx0_64k_tte;
2648 unsigned long __reserved1[2];
2649 unsigned long immu_tsb_hits_ctx0_4mb_tte;
2650 unsigned long immu_tsb_ticks_ctx0_4mb_tte;
2651 unsigned long __reserved2[2];
2652 unsigned long immu_tsb_hits_ctx0_256mb_tte;
2653 unsigned long immu_tsb_ticks_ctx0_256mb_tte;
2654 unsigned long __reserved3[4];
2655 unsigned long immu_tsb_hits_ctxnon0_8k_tte;
2656 unsigned long immu_tsb_ticks_ctxnon0_8k_tte;
2657 unsigned long immu_tsb_hits_ctxnon0_64k_tte;
2658 unsigned long immu_tsb_ticks_ctxnon0_64k_tte;
2659 unsigned long __reserved4[2];
2660 unsigned long immu_tsb_hits_ctxnon0_4mb_tte;
2661 unsigned long immu_tsb_ticks_ctxnon0_4mb_tte;
2662 unsigned long __reserved5[2];
2663 unsigned long immu_tsb_hits_ctxnon0_256mb_tte;
2664 unsigned long immu_tsb_ticks_ctxnon0_256mb_tte;
2665 unsigned long __reserved6[4];
2666 unsigned long dmmu_tsb_hits_ctx0_8k_tte;
2667 unsigned long dmmu_tsb_ticks_ctx0_8k_tte;
2668 unsigned long dmmu_tsb_hits_ctx0_64k_tte;
2669 unsigned long dmmu_tsb_ticks_ctx0_64k_tte;
2670 unsigned long __reserved7[2];
2671 unsigned long dmmu_tsb_hits_ctx0_4mb_tte;
2672 unsigned long dmmu_tsb_ticks_ctx0_4mb_tte;
2673 unsigned long __reserved8[2];
2674 unsigned long dmmu_tsb_hits_ctx0_256mb_tte;
2675 unsigned long dmmu_tsb_ticks_ctx0_256mb_tte;
2676 unsigned long __reserved9[4];
2677 unsigned long dmmu_tsb_hits_ctxnon0_8k_tte;
2678 unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte;
2679 unsigned long dmmu_tsb_hits_ctxnon0_64k_tte;
2680 unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte;
2681 unsigned long __reserved10[2];
2682 unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte;
2683 unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte;
2684 unsigned long __reserved11[2];
2685 unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte;
2686 unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte;
2687 unsigned long __reserved12[4];
2692 * TRAP: HV_FAST_TRAP
2693 * FUNCTION: HV_FAST_MMUSTAT_CONF
2694 * ARG0: real address
2696 * RET1: real address
2697 * ERRORS: ENORADDR Invalid real address
2698 * EBADALIGN Real address not aligned on 64-byte boundary
2699 * EBADTRAP API not supported on this processor
2701 * Enable MMU statistic gathering using the buffer at the given real
2702 * address on the current virtual CPU. The new buffer real address
2703 * is given in ARG1, and the previously specified buffer real address
2704 * is returned in RET1, or is returned as zero for the first invocation.
2706 * If the passed in real address argument is zero, this will disable
2707 * MMU statistic collection on the current virtual CPU. If an error is
2708 * returned then no statistics are collected.
2710 * The buffer contents should be initialized to all zeros before being
2711 * given to the hypervisor or else the statistics will be meaningless.
2713 #define HV_FAST_MMUSTAT_CONF 0x102
2716 * TRAP: HV_FAST_TRAP
2717 * FUNCTION: HV_FAST_MMUSTAT_INFO
2719 * RET1: real address
2720 * ERRORS: EBADTRAP API not supported on this processor
2722 * Return the current state and real address of the currently configured
2723 * MMU statistics buffer on the current virtual CPU.
2725 #define HV_FAST_MMUSTAT_INFO 0x103
2727 /* Function numbers for HV_CORE_TRAP. */
2728 #define HV_CORE_SET_VER 0x00
2729 #define HV_CORE_PUTCHAR 0x01
2730 #define HV_CORE_EXIT 0x02
2731 #define HV_CORE_GET_VER 0x03
2733 /* Hypervisor API groups for use with HV_CORE_SET_VER and
2736 #define HV_GRP_SUN4V 0x0000
2737 #define HV_GRP_CORE 0x0001
2738 #define HV_GRP_INTR 0x0002
2739 #define HV_GRP_SOFT_STATE 0x0003
2740 #define HV_GRP_PCI 0x0100
2741 #define HV_GRP_LDOM 0x0101
2742 #define HV_GRP_SVC_CHAN 0x0102
2743 #define HV_GRP_NCS 0x0103
2744 #define HV_GRP_NIAG_PERF 0x0200
2745 #define HV_GRP_FIRE_PERF 0x0201
2746 #define HV_GRP_DIAG 0x0300
2748 #ifndef __ASSEMBLY__
2749 extern unsigned long sun4v_get_version(unsigned long group,
2750 unsigned long *major,
2751 unsigned long *minor);
2752 extern unsigned long sun4v_set_version(unsigned long group,
2753 unsigned long major,
2754 unsigned long minor,
2755 unsigned long *actual_minor);
2757 extern int sun4v_hvapi_register(unsigned long group, unsigned long major,
2758 unsigned long *minor);
2759 extern void sun4v_hvapi_unregister(unsigned long group);
2760 extern int sun4v_hvapi_get(unsigned long group,
2761 unsigned long *major,
2762 unsigned long *minor);
2763 extern void sun4v_hvapi_init(void);
2766 #endif /* !(_SPARC64_HYPERVISOR_H) */