3 * by Ken Hollis (khollis@bitgate.com)
5 * Permission granted from Simon Machell (smachell@berkprod.com)
6 * Written for the Linux Kernel, and GPLed by Ken Hollis
8 * 960107 Added request_region routines, modulized the whole thing.
9 * 960108 Fixed end-of-file pointer (Thanks to Dan Hollis), added
11 * 960216 Added eof marker on the file, and changed verbose messages.
12 * 960716 Made functional and cosmetic changes to the source for
13 * inclusion in Linux 2.0.x kernels, thanks to Alan Cox.
14 * 960717 Removed read/seek routines, replaced with ioctl. Also, added
15 * check_region command due to Alan's suggestion.
16 * 960821 Made changes to compile in newer 2.0.x kernels. Added
17 * "cold reboot sense" entry.
18 * 960825 Made a few changes to code, deleted some defines and made
19 * typedefs to replace them. Made heartbeat reset only available
20 * via ioctl, and removed the write routine.
21 * 960828 Added new items for PC Watchdog Rev.C card.
22 * 960829 Changed around all of the IOCTLs, added new features,
23 * added watchdog disable/re-enable routines. Added firmware
24 * version reporting. Added read routine for temperature.
25 * Removed some extra defines, added an autodetect Revision
27 * 961006 Revised some documentation, fixed some cosmetic bugs. Made
28 * drivers to panic the system if it's overheating at bootup.
29 * 961118 Changed some verbiage on some of the output, tidied up
30 * code bits, and added compatibility to 2.1.x.
31 * 970912 Enabled board on open and disable on close.
32 * 971107 Took account of recent VFS changes (broke read).
33 * 971210 Disable board on initialisation in case board already ticking.
34 * 971222 Changed open/close for temperature handling
35 * Michael Meskes <meskes@debian.org>.
36 * 980112 Used minor numbers from include/linux/miscdevice.h
37 * 990403 Clear reset status after reading control status register in
38 * pcwd_showprevstate(). [Marc Boucher <marc@mbsi.ca>]
39 * 990605 Made changes to code to support Firmware 1.22a, added
40 * fairly useless proc entry.
41 * 990610 removed said useless proc code for the merge <alan>
42 * 000403 Removed last traces of proc code. <davej>
43 * 011214 Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT <Matt_Domsch@dell.com>
44 * Added timeout module option to override default
48 * A bells and whistles driver is available from http://www.pcwd.de/
49 * More info available at http://www.berkprod.com/ or http://www.pcwatchdog.com/
52 #include <linux/module.h> /* For module specific items */
53 #include <linux/moduleparam.h> /* For new moduleparam's */
54 #include <linux/types.h> /* For standard types (like size_t) */
55 #include <linux/errno.h> /* For the -ENODEV/... values */
56 #include <linux/kernel.h> /* For printk/panic/... */
57 #include <linux/delay.h> /* For mdelay function */
58 #include <linux/timer.h> /* For timer related operations */
59 #include <linux/jiffies.h> /* For jiffies stuff */
60 #include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
61 #include <linux/watchdog.h> /* For the watchdog specific items */
62 #include <linux/reboot.h> /* For kernel_power_off() */
63 #include <linux/init.h> /* For __init/__exit/... */
64 #include <linux/fs.h> /* For file operations */
65 #include <linux/isa.h> /* For isa devices */
66 #include <linux/ioport.h> /* For io-port access */
67 #include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
69 #include <asm/uaccess.h> /* For copy_to_user/put_user/... */
70 #include <asm/io.h> /* For inb/outb/... */
72 /* Module and version information */
73 #define WATCHDOG_VERSION "1.20"
74 #define WATCHDOG_DATE "18 Feb 2007"
75 #define WATCHDOG_DRIVER_NAME "ISA-PC Watchdog"
76 #define WATCHDOG_NAME "pcwd"
77 #define PFX WATCHDOG_NAME ": "
78 #define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION " (" WATCHDOG_DATE ")\n"
79 #define WD_VER WATCHDOG_VERSION " (" WATCHDOG_DATE ")"
82 * It should be noted that PCWD_REVISION_B was removed because A and B
83 * are essentially the same types of card, with the exception that B
84 * has temperature reporting. Since I didn't receive a Rev.B card,
85 * the Rev.B card is not supported. (It's a good thing too, as they
86 * are no longer in production.)
88 #define PCWD_REVISION_A 1
89 #define PCWD_REVISION_C 2
92 * These are the auto-probe addresses available.
94 * Revision A only uses ports 0x270 and 0x370. Revision C introduced 0x350.
95 * Revision A has an address range of 2 addresses, while Revision C has 4.
97 #define PCWD_ISA_NR_CARDS 3
98 static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 };
101 * These are the defines that describe the control status bits for the
102 * PCI-PC Watchdog card.
104 /* Port 1 : Control Status #1 for the PC Watchdog card, revision A. */
105 #define WD_WDRST 0x01 /* Previously reset state */
106 #define WD_T110 0x02 /* Temperature overheat sense */
107 #define WD_HRTBT 0x04 /* Heartbeat sense */
108 #define WD_RLY2 0x08 /* External relay triggered */
109 #define WD_SRLY2 0x80 /* Software external relay triggered */
110 /* Port 1 : Control Status #1 for the PC Watchdog card, revision C. */
111 #define WD_REVC_WTRP 0x01 /* Watchdog Trip status */
112 #define WD_REVC_HRBT 0x02 /* Watchdog Heartbeat */
113 #define WD_REVC_TTRP 0x04 /* Temperature Trip status */
114 #define WD_REVC_RL2A 0x08 /* Relay 2 activated by on-board processor */
115 #define WD_REVC_RL1A 0x10 /* Relay 1 active */
116 #define WD_REVC_R2DS 0x40 /* Relay 2 disable */
117 #define WD_REVC_RLY2 0x80 /* Relay 2 activated? */
118 /* Port 2 : Control Status #2 */
119 #define WD_WDIS 0x10 /* Watchdog Disabled */
120 #define WD_ENTP 0x20 /* Watchdog Enable Temperature Trip */
121 #define WD_SSEL 0x40 /* Watchdog Switch Select (1:SW1 <-> 0:SW2) */
122 #define WD_WCMD 0x80 /* Watchdog Command Mode */
124 /* max. time we give an ISA watchdog card to process a command */
125 /* 500ms for each 4 bit response (according to spec.) */
126 #define ISA_COMMAND_TIMEOUT 1000
128 /* Watchdog's internal commands */
129 #define CMD_ISA_IDLE 0x00
130 #define CMD_ISA_VERSION_INTEGER 0x01
131 #define CMD_ISA_VERSION_TENTH 0x02
132 #define CMD_ISA_VERSION_HUNDRETH 0x03
133 #define CMD_ISA_VERSION_MINOR 0x04
134 #define CMD_ISA_SWITCH_SETTINGS 0x05
135 #define CMD_ISA_RESET_PC 0x06
136 #define CMD_ISA_ARM_0 0x07
137 #define CMD_ISA_ARM_30 0x08
138 #define CMD_ISA_ARM_60 0x09
139 #define CMD_ISA_DELAY_TIME_2SECS 0x0A
140 #define CMD_ISA_DELAY_TIME_4SECS 0x0B
141 #define CMD_ISA_DELAY_TIME_8SECS 0x0C
142 #define CMD_ISA_RESET_RELAYS 0x0D
144 /* Watchdog's Dip Switch heartbeat values */
145 static const int heartbeat_tbl [] = {
146 20, /* OFF-OFF-OFF = 20 Sec */
147 40, /* OFF-OFF-ON = 40 Sec */
148 60, /* OFF-ON-OFF = 1 Min */
149 300, /* OFF-ON-ON = 5 Min */
150 600, /* ON-OFF-OFF = 10 Min */
151 1800, /* ON-OFF-ON = 30 Min */
152 3600, /* ON-ON-OFF = 1 Hour */
153 7200, /* ON-ON-ON = 2 hour */
157 * We are using an kernel timer to do the pinging of the watchdog
158 * every ~500ms. We try to set the internal heartbeat of the
162 #define WDT_INTERVAL (HZ/2+1)
164 /* We can only use 1 card due to the /dev/watchdog restriction */
165 static int cards_found;
167 /* internal variables */
168 static atomic_t open_allowed = ATOMIC_INIT(1);
169 static char expect_close;
170 static int temp_panic;
171 static struct { /* this is private data for each ISA-PC watchdog card */
172 char fw_ver_str[6]; /* The cards firmware version */
173 int revision; /* The card's revision */
174 int supports_temp; /* Wether or not the card has a temperature device */
175 int command_mode; /* Wether or not the card is in command mode */
176 int boot_status; /* The card's boot status */
177 int io_addr; /* The cards I/O address */
178 spinlock_t io_lock; /* the lock for io operations */
179 struct timer_list timer; /* The timer that pings the watchdog */
180 unsigned long next_heartbeat; /* the next_heartbeat for the timer */
183 /* module parameters */
184 #define QUIET 0 /* Default */
185 #define VERBOSE 1 /* Verbose */
186 #define DEBUG 2 /* print fancy stuff too */
187 static int debug = QUIET;
188 module_param(debug, int, 0);
189 MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)");
191 #define WATCHDOG_HEARTBEAT 0 /* default heartbeat = delay-time from dip-switches */
192 static int heartbeat = WATCHDOG_HEARTBEAT;
193 module_param(heartbeat, int, 0);
194 MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<=heartbeat<=7200 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
196 static int nowayout = WATCHDOG_NOWAYOUT;
197 module_param(nowayout, int, 0);
198 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
204 static int send_isa_command(int cmd)
208 int port0, last_port0; /* Double read for stabilising */
211 printk(KERN_DEBUG PFX "sending following data cmd=0x%02x\n",
214 /* The WCMD bit must be 1 and the command is only 4 bits in size */
215 control_status = (cmd & 0x0F) | WD_WCMD;
216 outb_p(control_status, pcwd_private.io_addr + 2);
217 udelay(ISA_COMMAND_TIMEOUT);
219 port0 = inb_p(pcwd_private.io_addr);
220 for (i = 0; i < 25; ++i) {
222 port0 = inb_p(pcwd_private.io_addr);
224 if (port0 == last_port0)
225 break; /* Data is stable */
231 printk(KERN_DEBUG PFX "received following data for cmd=0x%02x: port0=0x%02x last_port0=0x%02x\n",
232 cmd, port0, last_port0);
237 static int set_command_mode(void)
239 int i, found=0, count=0;
241 /* Set the card into command mode */
242 spin_lock(&pcwd_private.io_lock);
243 while ((!found) && (count < 3)) {
244 i = send_isa_command(CMD_ISA_IDLE);
248 else if (i == 0xF3) {
249 /* Card does not like what we've done to it */
250 outb_p(0x00, pcwd_private.io_addr + 2);
251 udelay(1200); /* Spec says wait 1ms */
252 outb_p(0x00, pcwd_private.io_addr + 2);
253 udelay(ISA_COMMAND_TIMEOUT);
257 spin_unlock(&pcwd_private.io_lock);
258 pcwd_private.command_mode = found;
261 printk(KERN_DEBUG PFX "command_mode=%d\n",
262 pcwd_private.command_mode);
267 static void unset_command_mode(void)
269 /* Set the card into normal mode */
270 spin_lock(&pcwd_private.io_lock);
271 outb_p(0x00, pcwd_private.io_addr + 2);
272 udelay(ISA_COMMAND_TIMEOUT);
273 spin_unlock(&pcwd_private.io_lock);
275 pcwd_private.command_mode = 0;
278 printk(KERN_DEBUG PFX "command_mode=%d\n",
279 pcwd_private.command_mode);
282 static inline void pcwd_check_temperature_support(void)
284 if (inb(pcwd_private.io_addr) != 0xF0)
285 pcwd_private.supports_temp = 1;
288 static inline void pcwd_get_firmware(void)
290 int one, ten, hund, minor;
292 strcpy(pcwd_private.fw_ver_str, "ERROR");
294 if (set_command_mode()) {
295 one = send_isa_command(CMD_ISA_VERSION_INTEGER);
296 ten = send_isa_command(CMD_ISA_VERSION_TENTH);
297 hund = send_isa_command(CMD_ISA_VERSION_HUNDRETH);
298 minor = send_isa_command(CMD_ISA_VERSION_MINOR);
299 sprintf(pcwd_private.fw_ver_str, "%c.%c%c%c", one, ten, hund, minor);
301 unset_command_mode();
306 static inline int pcwd_get_option_switches(void)
308 int option_switches=0;
310 if (set_command_mode()) {
311 /* Get switch settings */
312 option_switches = send_isa_command(CMD_ISA_SWITCH_SETTINGS);
315 unset_command_mode();
316 return(option_switches);
319 static void pcwd_show_card_info(void)
323 /* Get some extra info from the hardware (in command/debug/diag mode) */
324 if (pcwd_private.revision == PCWD_REVISION_A)
325 printk(KERN_INFO PFX "ISA-PC Watchdog (REV.A) detected at port 0x%04x\n", pcwd_private.io_addr);
326 else if (pcwd_private.revision == PCWD_REVISION_C) {
328 printk(KERN_INFO PFX "ISA-PC Watchdog (REV.C) detected at port 0x%04x (Firmware version: %s)\n",
329 pcwd_private.io_addr, pcwd_private.fw_ver_str);
330 option_switches = pcwd_get_option_switches();
331 printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
333 ((option_switches & 0x10) ? "ON" : "OFF"),
334 ((option_switches & 0x08) ? "ON" : "OFF"));
336 /* Reprogram internal heartbeat to 2 seconds */
337 if (set_command_mode()) {
338 send_isa_command(CMD_ISA_DELAY_TIME_2SECS);
339 unset_command_mode();
343 if (pcwd_private.supports_temp)
344 printk(KERN_INFO PFX "Temperature Option Detected\n");
346 if (pcwd_private.boot_status & WDIOF_CARDRESET)
347 printk(KERN_INFO PFX "Previous reboot was caused by the card\n");
349 if (pcwd_private.boot_status & WDIOF_OVERHEAT) {
350 printk(KERN_EMERG PFX "Card senses a CPU Overheat. Panicking!\n");
351 printk(KERN_EMERG PFX "CPU Overheat\n");
354 if (pcwd_private.boot_status == 0)
355 printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n");
358 static void pcwd_timer_ping(unsigned long data)
362 /* If we got a heartbeat pulse within the WDT_INTERVAL
363 * we agree to ping the WDT */
364 if(time_before(jiffies, pcwd_private.next_heartbeat)) {
365 /* Ping the watchdog */
366 spin_lock(&pcwd_private.io_lock);
367 if (pcwd_private.revision == PCWD_REVISION_A) {
368 /* Rev A cards are reset by setting the WD_WDRST bit in register 1 */
369 wdrst_stat = inb_p(pcwd_private.io_addr);
371 wdrst_stat |= WD_WDRST;
373 outb_p(wdrst_stat, pcwd_private.io_addr + 1);
375 /* Re-trigger watchdog by writing to port 0 */
376 outb_p(0x00, pcwd_private.io_addr);
379 /* Re-set the timer interval */
380 mod_timer(&pcwd_private.timer, jiffies + WDT_INTERVAL);
382 spin_unlock(&pcwd_private.io_lock);
384 printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n");
388 static int pcwd_start(void)
392 pcwd_private.next_heartbeat = jiffies + (heartbeat * HZ);
394 /* Start the timer */
395 mod_timer(&pcwd_private.timer, jiffies + WDT_INTERVAL);
397 /* Enable the port */
398 if (pcwd_private.revision == PCWD_REVISION_C) {
399 spin_lock(&pcwd_private.io_lock);
400 outb_p(0x00, pcwd_private.io_addr + 3);
401 udelay(ISA_COMMAND_TIMEOUT);
402 stat_reg = inb_p(pcwd_private.io_addr + 2);
403 spin_unlock(&pcwd_private.io_lock);
404 if (stat_reg & WD_WDIS) {
405 printk(KERN_INFO PFX "Could not start watchdog\n");
410 if (debug >= VERBOSE)
411 printk(KERN_DEBUG PFX "Watchdog started\n");
416 static int pcwd_stop(void)
421 del_timer(&pcwd_private.timer);
423 /* Disable the board */
424 if (pcwd_private.revision == PCWD_REVISION_C) {
425 spin_lock(&pcwd_private.io_lock);
426 outb_p(0xA5, pcwd_private.io_addr + 3);
427 udelay(ISA_COMMAND_TIMEOUT);
428 outb_p(0xA5, pcwd_private.io_addr + 3);
429 udelay(ISA_COMMAND_TIMEOUT);
430 stat_reg = inb_p(pcwd_private.io_addr + 2);
431 spin_unlock(&pcwd_private.io_lock);
432 if ((stat_reg & WD_WDIS) == 0) {
433 printk(KERN_INFO PFX "Could not stop watchdog\n");
438 if (debug >= VERBOSE)
439 printk(KERN_DEBUG PFX "Watchdog stopped\n");
444 static int pcwd_keepalive(void)
447 pcwd_private.next_heartbeat = jiffies + (heartbeat * HZ);
450 printk(KERN_DEBUG PFX "Watchdog keepalive signal send\n");
455 static int pcwd_set_heartbeat(int t)
457 if ((t < 2) || (t > 7200)) /* arbitrary upper limit */
462 if (debug >= VERBOSE)
463 printk(KERN_DEBUG PFX "New heartbeat: %d\n",
469 static int pcwd_get_status(int *status)
474 spin_lock(&pcwd_private.io_lock);
475 if (pcwd_private.revision == PCWD_REVISION_A)
476 /* Rev A cards return status information from
477 * the base register, which is used for the
478 * temperature in other cards. */
479 control_status = inb(pcwd_private.io_addr);
481 /* Rev C cards return card status in the base
482 * address + 1 register. And use different bits
483 * to indicate a card initiated reset, and an
484 * over-temperature condition. And the reboot
485 * status can be reset. */
486 control_status = inb(pcwd_private.io_addr + 1);
488 spin_unlock(&pcwd_private.io_lock);
490 if (pcwd_private.revision == PCWD_REVISION_A) {
491 if (control_status & WD_WDRST)
492 *status |= WDIOF_CARDRESET;
494 if (control_status & WD_T110) {
495 *status |= WDIOF_OVERHEAT;
497 printk(KERN_INFO PFX "Temperature overheat trip!\n");
499 /* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */
503 if (control_status & WD_REVC_WTRP)
504 *status |= WDIOF_CARDRESET;
506 if (control_status & WD_REVC_TTRP) {
507 *status |= WDIOF_OVERHEAT;
509 printk(KERN_INFO PFX "Temperature overheat trip!\n");
511 /* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */
519 static int pcwd_clear_status(void)
523 if (pcwd_private.revision == PCWD_REVISION_C) {
524 spin_lock(&pcwd_private.io_lock);
526 if (debug >= VERBOSE)
527 printk(KERN_INFO PFX "clearing watchdog trip status\n");
529 control_status = inb_p(pcwd_private.io_addr + 1);
531 if (debug >= DEBUG) {
532 printk(KERN_DEBUG PFX "status was: 0x%02x\n", control_status);
533 printk(KERN_DEBUG PFX "sending: 0x%02x\n",
534 (control_status & WD_REVC_R2DS));
537 /* clear reset status & Keep Relay 2 disable state as it is */
538 outb_p((control_status & WD_REVC_R2DS), pcwd_private.io_addr + 1);
540 spin_unlock(&pcwd_private.io_lock);
545 static int pcwd_get_temperature(int *temperature)
547 /* check that port 0 gives temperature info and no command results */
548 if (pcwd_private.command_mode)
552 if (!pcwd_private.supports_temp)
556 * Convert celsius to fahrenheit, since this was
557 * the decided 'standard' for this return value.
559 spin_lock(&pcwd_private.io_lock);
560 *temperature = ((inb(pcwd_private.io_addr)) * 9 / 5) + 32;
561 spin_unlock(&pcwd_private.io_lock);
563 if (debug >= DEBUG) {
564 printk(KERN_DEBUG PFX "temperature is: %d F\n",
572 * /dev/watchdog handling
575 static int pcwd_ioctl(struct inode *inode, struct file *file,
576 unsigned int cmd, unsigned long arg)
582 int __user *argp = (int __user *)arg;
583 static struct watchdog_info ident = {
584 .options = WDIOF_OVERHEAT |
586 WDIOF_KEEPALIVEPING |
589 .firmware_version = 1,
597 case WDIOC_GETSUPPORT:
598 if(copy_to_user(argp, &ident, sizeof(ident)))
602 case WDIOC_GETSTATUS:
603 pcwd_get_status(&status);
604 return put_user(status, argp);
606 case WDIOC_GETBOOTSTATUS:
607 return put_user(pcwd_private.boot_status, argp);
610 if (pcwd_get_temperature(&temperature))
613 return put_user(temperature, argp);
615 case WDIOC_SETOPTIONS:
616 if (pcwd_private.revision == PCWD_REVISION_C)
618 if(copy_from_user(&rv, argp, sizeof(int)))
621 if (rv & WDIOS_DISABLECARD)
626 if (rv & WDIOS_ENABLECARD)
631 if (rv & WDIOS_TEMPPANIC)
638 case WDIOC_KEEPALIVE:
642 case WDIOC_SETTIMEOUT:
643 if (get_user(new_heartbeat, argp))
646 if (pcwd_set_heartbeat(new_heartbeat))
652 case WDIOC_GETTIMEOUT:
653 return put_user(heartbeat, argp);
659 static ssize_t pcwd_write(struct file *file, const char __user *buf, size_t len,
666 /* In case it was set long ago */
669 for (i = 0; i != len; i++) {
672 if (get_user(c, buf + i))
683 static int pcwd_open(struct inode *inode, struct file *file)
685 if (!atomic_dec_and_test(&open_allowed) ) {
686 if (debug >= VERBOSE)
687 printk(KERN_ERR PFX "Attempt to open already opened device.\n");
688 atomic_inc( &open_allowed );
693 __module_get(THIS_MODULE);
698 return nonseekable_open(inode, file);
701 static int pcwd_close(struct inode *inode, struct file *file)
703 if (expect_close == 42) {
706 printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
710 atomic_inc( &open_allowed );
715 * /dev/temperature handling
718 static ssize_t pcwd_temp_read(struct file *file, char __user *buf, size_t count,
723 if (pcwd_get_temperature(&temperature))
726 if (copy_to_user(buf, &temperature, 1))
732 static int pcwd_temp_open(struct inode *inode, struct file *file)
734 if (!pcwd_private.supports_temp)
737 return nonseekable_open(inode, file);
740 static int pcwd_temp_close(struct inode *inode, struct file *file)
749 static const struct file_operations pcwd_fops = {
750 .owner = THIS_MODULE,
755 .release = pcwd_close,
758 static struct miscdevice pcwd_miscdev = {
759 .minor = WATCHDOG_MINOR,
764 static const struct file_operations pcwd_temp_fops = {
765 .owner = THIS_MODULE,
767 .read = pcwd_temp_read,
768 .open = pcwd_temp_open,
769 .release = pcwd_temp_close,
772 static struct miscdevice temp_miscdev = {
774 .name = "temperature",
775 .fops = &pcwd_temp_fops,
779 * Init & exit routines
782 static inline int get_revision(void)
784 int r = PCWD_REVISION_C;
786 spin_lock(&pcwd_private.io_lock);
787 /* REV A cards use only 2 io ports; test
788 * presumes a floating bus reads as 0xff. */
789 if ((inb(pcwd_private.io_addr + 2) == 0xFF) ||
790 (inb(pcwd_private.io_addr + 3) == 0xFF))
792 spin_unlock(&pcwd_private.io_lock);
798 * The ISA cards have a heartbeat bit in one of the registers, which
799 * register is card dependent. The heartbeat bit is monitored, and if
800 * found, is considered proof that a Berkshire card has been found.
801 * The initial rate is once per second at board start up, then twice
802 * per second for normal operation.
804 static int __devinit pcwd_isa_match(struct device *dev, unsigned int id)
806 int base_addr=pcwd_ioports[id];
807 int port0, last_port0; /* Reg 0, in case it's REV A */
808 int port1, last_port1; /* Register 1 for REV C cards */
813 printk(KERN_DEBUG PFX "pcwd_isa_match id=%d\n",
816 if (!request_region (base_addr, 4, "PCWD")) {
817 printk(KERN_INFO PFX "Port 0x%04x unavailable\n", base_addr);
823 port0 = inb_p(base_addr); /* For REV A boards */
824 port1 = inb_p(base_addr + 1); /* For REV C boards */
825 if (port0 != 0xff || port1 != 0xff) {
826 /* Not an 'ff' from a floating bus, so must be a card! */
827 for (i = 0; i < 4; ++i) {
834 port0 = inb_p(base_addr);
835 port1 = inb_p(base_addr + 1);
837 /* Has either hearbeat bit changed? */
838 if ((port0 ^ last_port0) & WD_HRTBT ||
839 (port1 ^ last_port1) & WD_REVC_HRBT) {
845 release_region (base_addr, 4);
850 static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id)
855 printk(KERN_DEBUG PFX "pcwd_isa_probe id=%d\n",
859 if (cards_found == 1)
860 printk(KERN_INFO PFX "v%s Ken Hollis (kenji@bitgate.com)\n", WD_VER);
862 if (cards_found > 1) {
863 printk(KERN_ERR PFX "This driver only supports 1 device\n");
867 if (pcwd_ioports[id] == 0x0000) {
868 printk(KERN_ERR PFX "No I/O-Address for card detected\n");
871 pcwd_private.io_addr = pcwd_ioports[id];
873 spin_lock_init(&pcwd_private.io_lock);
875 /* Check card's revision */
876 pcwd_private.revision = get_revision();
878 if (!request_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) {
879 printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
880 pcwd_private.io_addr);
882 goto error_request_region;
885 /* Initial variables */
886 pcwd_private.supports_temp = 0;
888 pcwd_private.boot_status = 0x0000;
890 /* get the boot_status */
891 pcwd_get_status(&pcwd_private.boot_status);
893 /* clear the "card caused reboot" flag */
896 setup_timer(&pcwd_private.timer, pcwd_timer_ping, 0);
898 /* Disable the board */
901 /* Check whether or not the card supports the temperature device */
902 pcwd_check_temperature_support();
904 /* Show info about the card itself */
905 pcwd_show_card_info();
907 /* If heartbeat = 0 then we use the heartbeat from the dip-switches */
909 heartbeat = heartbeat_tbl[(pcwd_get_option_switches() & 0x07)];
911 /* Check that the heartbeat value is within it's range ; if not reset to the default */
912 if (pcwd_set_heartbeat(heartbeat)) {
913 pcwd_set_heartbeat(WATCHDOG_HEARTBEAT);
914 printk(KERN_INFO PFX "heartbeat value must be 2<=heartbeat<=7200, using %d\n",
918 if (pcwd_private.supports_temp) {
919 ret = misc_register(&temp_miscdev);
921 printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
923 goto error_misc_register_temp;
927 ret = misc_register(&pcwd_miscdev);
929 printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
930 WATCHDOG_MINOR, ret);
931 goto error_misc_register_watchdog;
934 printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
935 heartbeat, nowayout);
939 error_misc_register_watchdog:
940 if (pcwd_private.supports_temp)
941 misc_deregister(&temp_miscdev);
942 error_misc_register_temp:
943 release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
944 error_request_region:
945 pcwd_private.io_addr = 0x0000;
950 static int __devexit pcwd_isa_remove(struct device *dev, unsigned int id)
953 printk(KERN_DEBUG PFX "pcwd_isa_remove id=%d\n",
956 if (!pcwd_private.io_addr)
959 /* Disable the board */
964 misc_deregister(&pcwd_miscdev);
965 if (pcwd_private.supports_temp)
966 misc_deregister(&temp_miscdev);
967 release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
968 pcwd_private.io_addr = 0x0000;
974 static void pcwd_isa_shutdown(struct device *dev, unsigned int id)
977 printk(KERN_DEBUG PFX "pcwd_isa_shutdown id=%d\n",
983 static struct isa_driver pcwd_isa_driver = {
984 .match = pcwd_isa_match,
985 .probe = pcwd_isa_probe,
986 .remove = __devexit_p(pcwd_isa_remove),
987 .shutdown = pcwd_isa_shutdown,
989 .owner = THIS_MODULE,
990 .name = WATCHDOG_NAME,
994 static int __init pcwd_init_module(void)
996 return isa_register_driver(&pcwd_isa_driver, PCWD_ISA_NR_CARDS);
999 static void __exit pcwd_cleanup_module(void)
1001 isa_unregister_driver(&pcwd_isa_driver);
1002 printk(KERN_INFO PFX "Watchdog Module Unloaded.\n");
1005 module_init(pcwd_init_module);
1006 module_exit(pcwd_cleanup_module);
1008 MODULE_AUTHOR("Ken Hollis <kenji@bitgate.com>, Wim Van Sebroeck <wim@iguana.be>");
1009 MODULE_DESCRIPTION("Berkshire ISA-PC Watchdog driver");
1010 MODULE_VERSION(WATCHDOG_VERSION);
1011 MODULE_LICENSE("GPL");
1012 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
1013 MODULE_ALIAS_MISCDEV(TEMP_MINOR);