err.no Git - linux-2.6/blob - drivers/video/sunxvr2500.c

   1 /* s3d.c: Sun 3DLABS XVR-2500 et al. driver for sparc64 systems
   2  *
   3  * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
   4  */
   5
   6 #include <linux/module.h>
   7 #include <linux/kernel.h>
   8 #include <linux/slab.h>
   9 #include <linux/fb.h>
  10 #include <linux/pci.h>
  11 #include <linux/init.h>
  12 #include <linux/of_device.h>
  13
  14 #include <asm/io.h>
  15
  16 struct s3d_info {
  17         struct fb_info          *info;
  18         struct pci_dev          *pdev;
  19
  20         char __iomem            *fb_base;
  21         unsigned long           fb_base_phys;
  22
  23         struct device_node      *of_node;
  24
  25         unsigned int            width;
  26         unsigned int            height;
  27         unsigned int            depth;
  28         unsigned int            fb_size;
  29
  30         u32                     pseudo_palette[16];
  31 };
  32
  33 static int __devinit s3d_get_props(struct s3d_info *sp)
  34 {
  35         sp->width = of_getintprop_default(sp->of_node, "width", 0);
  36         sp->height = of_getintprop_default(sp->of_node, "height", 0);
  37         sp->depth = of_getintprop_default(sp->of_node, "depth", 8);
  38
  39         if (!sp->width || !sp->height) {
  40                 printk(KERN_ERR "s3d: Critical properties missing for %s\n",
  41                        pci_name(sp->pdev));
  42                 return -EINVAL;
  43         }
  44
  45         return 0;
  46 }
  47
  48 static int s3d_setcolreg(unsigned regno,
  49                          unsigned red, unsigned green, unsigned blue,
  50                          unsigned transp, struct fb_info *info)
  51 {
  52         u32 value;
  53
  54         if (regno < 16) {
  55                 red >>= 8;
  56                 green >>= 8;
  57                 blue >>= 8;
  58
  59                 value = (blue << 24) | (green << 16) | (red << 8);
  60                 ((u32 *)info->pseudo_palette)[regno] = value;
  61         }
  62
  63         return 0;
  64 }
  65
  66 static struct fb_ops s3d_ops = {
  67         .owner                  = THIS_MODULE,
  68         .fb_setcolreg           = s3d_setcolreg,
  69         .fb_fillrect            = cfb_fillrect,
  70         .fb_copyarea            = cfb_copyarea,
  71         .fb_imageblit           = cfb_imageblit,
  72 };
  73
  74 static int __devinit s3d_set_fbinfo(struct s3d_info *sp)
  75 {
  76         struct fb_info *info = sp->info;
  77         struct fb_var_screeninfo *var = &info->var;
  78
  79         info->flags = FBINFO_DEFAULT;
  80         info->fbops = &s3d_ops;
  81         info->screen_base = sp->fb_base;
  82         info->screen_size = sp->fb_size;
  83
  84         info->pseudo_palette = sp->pseudo_palette;
  85
  86         /* Fill fix common fields */
  87         strlcpy(info->fix.id, "s3d", sizeof(info->fix.id));
  88         info->fix.smem_start = sp->fb_base_phys;
  89         info->fix.smem_len = sp->fb_size;
  90         info->fix.type = FB_TYPE_PACKED_PIXELS;
  91         if (sp->depth == 32 || sp->depth == 24)
  92                 info->fix.visual = FB_VISUAL_TRUECOLOR;
  93         else
  94                 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
  95
  96         var->xres = sp->width;
  97         var->yres = sp->height;
  98         var->xres_virtual = var->xres;
  99         var->yres_virtual = var->yres;
 100         var->bits_per_pixel = sp->depth;
 101
 102         var->red.offset = 8;
 103         var->red.length = 8;
 104         var->green.offset = 16;
 105         var->green.length = 8;
 106         var->blue.offset = 24;
 107         var->blue.length = 8;
 108         var->transp.offset = 0;
 109         var->transp.length = 0;
 110
 111         if (fb_alloc_cmap(&info->cmap, 256, 0)) {
 112                 printk(KERN_ERR "s3d: Cannot allocate color map.\n");
 113                 return -ENOMEM;
 114         }
 115
 116         return 0;
 117 }
 118
 119 static int __devinit s3d_pci_register(struct pci_dev *pdev,
 120                                       const struct pci_device_id *ent)
 121 {
 122         struct fb_info *info;
 123         struct s3d_info *sp;
 124         int err;
 125
 126         err = pci_enable_device(pdev);
 127         if (err < 0) {
 128                 printk(KERN_ERR "s3d: Cannot enable PCI device %s\n",
 129                        pci_name(pdev));
 130                 goto err_out;
 131         }
 132
 133         info = framebuffer_alloc(sizeof(struct s3d_info), &pdev->dev);
 134         if (!info) {
 135                 printk(KERN_ERR "s3d: Cannot allocate fb_info\n");
 136                 err = -ENOMEM;
 137                 goto err_disable;
 138         }
 139
 140         sp = info->par;
 141         sp->info = info;
 142         sp->pdev = pdev;
 143         sp->of_node = pci_device_to_OF_node(pdev);
 144         if (!sp->of_node) {
 145                 printk(KERN_ERR "s3d: Cannot find OF node of %s\n",
 146                        pci_name(pdev));
 147                 err = -ENODEV;
 148                 goto err_release_fb;
 149         }
 150
 151         sp->fb_base_phys = pci_resource_start (pdev, 1);
 152
 153         err = pci_request_region(pdev, 1, "s3d framebuffer");
 154         if (err < 0) {
 155                 printk("s3d: Cannot request region 1 for %s\n",
 156                        pci_name(pdev));
 157                 goto err_release_fb;
 158         }
 159
 160         err = s3d_get_props(sp);
 161         if (err)
 162                 goto err_release_pci;
 163
 164         /* XXX 'linebytes' is often wrong, it is equal to the width
 165          * XXX with depth of 32 on my XVR-2500 which is clearly not
 166          * XXX right.  So we don't try to use it.
 167          */
 168         switch (sp->depth) {
 169         case 8:
 170                 info->fix.line_length = sp->width;
 171                 break;
 172         case 16:
 173                 info->fix.line_length = sp->width * 2;
 174                 break;
 175         case 24:
 176                 info->fix.line_length = sp->width * 3;
 177                 break;
 178         case 32:
 179                 info->fix.line_length = sp->width * 4;
 180                 break;
 181         }
 182         sp->fb_size = info->fix.line_length * sp->height;
 183
 184         sp->fb_base = ioremap(sp->fb_base_phys, sp->fb_size);
 185         if (!sp->fb_base)
 186                 goto err_release_pci;
 187
 188         err = s3d_set_fbinfo(sp);
 189         if (err)
 190                 goto err_unmap_fb;
 191
 192         pci_set_drvdata(pdev, info);
 193
 194         printk("s3d: Found device at %s\n", pci_name(pdev));
 195
 196         err = register_framebuffer(info);
 197         if (err < 0) {
 198                 printk(KERN_ERR "s3d: Could not register framebuffer %s\n",
 199                        pci_name(pdev));
 200                 goto err_unmap_fb;
 201         }
 202
 203         return 0;
 204
 205 err_unmap_fb:
 206         iounmap(sp->fb_base);
 207
 208 err_release_pci:
 209         pci_release_region(pdev, 1);
 210
 211 err_release_fb:
 212         framebuffer_release(info);
 213
 214 err_disable:
 215         pci_disable_device(pdev);
 216
 217 err_out:
 218         return err;
 219 }
 220
 221 static void __devexit s3d_pci_unregister(struct pci_dev *pdev)
 222 {
 223         struct fb_info *info = pci_get_drvdata(pdev);
 224         struct s3d_info *sp = info->par;
 225
 226         unregister_framebuffer(info);
 227
 228         iounmap(sp->fb_base);
 229
 230         pci_release_region(pdev, 1);
 231
 232         framebuffer_release(info);
 233
 234         pci_disable_device(pdev);
 235 }
 236
 237 static struct pci_device_id s3d_pci_table[] = {
 238         {       PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x002c),       },
 239         {       PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x002d),       },
 240         {       PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x002e),       },
 241         {       PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x002f),       },
 242         {       PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x0030),       },
 243         {       PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x0031),       },
 244         {       PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x0032),       },
 245         {       PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x0033),       },
 246         { 0, }
 247 };
 248
 249 static struct pci_driver s3d_driver = {
 250         .name           = "s3d",
 251         .id_table       = s3d_pci_table,
 252         .probe          = s3d_pci_register,
 253         .remove         = __devexit_p(s3d_pci_unregister),
 254 };
 255
 256 static int __init s3d_init(void)
 257 {
 258         if (fb_get_options("s3d", NULL))
 259                 return -ENODEV;
 260
 261         return pci_register_driver(&s3d_driver);
 262 }
 263
 264 static void __exit s3d_exit(void)
 265 {
 266         pci_unregister_driver(&s3d_driver);
 267 }
 268
 269 module_init(s3d_init);
 270 module_exit(s3d_exit);
 271
 272 MODULE_DESCRIPTION("framebuffer driver for Sun XVR-2500 graphics");
 273 MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
 274 MODULE_VERSION("1.0");
 275 MODULE_LICENSE("GPL");