2 * linux/drivers/video/neofb.c -- NeoMagic Framebuffer Driver
4 * Copyright (c) 2001-2002 Denis Oliver Kropp <dok@directfb.org>
7 * Card specific code is based on XFree86's neomagic driver.
8 * Framebuffer framework code is based on code of cyber2000fb.
10 * This file is subject to the terms and conditions of the GNU General
11 * Public License. See the file COPYING in the main directory of this
12 * archive for more details.
16 * - Cosmetic changes (dok)
19 * - Toshiba Libretto support, allow modes larger than LCD size if
20 * LCD is disabled, keep BIOS settings if internal/external display
21 * haven't been enabled explicitly
22 * (Thomas J. Moore <dark@mama.indstate.edu>)
25 * - Porting over to new fbdev api. (jsimmons)
28 * - got rid of all floating point (dok)
31 * - added module license (dok)
34 * - hardware accelerated clear and move for 2200 and above (dok)
35 * - maximum allowed dotclock is handled now (dok)
38 * - correct panning after X usage (dok)
39 * - added module and kernel parameters (dok)
40 * - no stretching if external display is enabled (dok)
43 * - initial version (dok)
47 * - ioctl for internal/external switching
49 * - 32bit depth support, maybe impossible
50 * - disable pan-on-sync, need specs
53 * - white margin on bootup like with tdfxfb (colormap problem?)
57 #include <linux/module.h>
58 #include <linux/kernel.h>
59 #include <linux/errno.h>
60 #include <linux/string.h>
62 #include <linux/slab.h>
63 #include <linux/delay.h>
65 #include <linux/pci.h>
66 #include <linux/init.h>
68 #include <linux/toshiba.h>
73 #include <asm/pgtable.h>
74 #include <asm/system.h>
80 #include <video/vga.h>
81 #include <video/neomagic.h>
83 #define NEOFB_VERSION "0.4.2"
85 /* --------------------------------------------------------------------- */
91 static int nopciburst;
92 static char *mode_option __devinitdata = NULL;
96 MODULE_AUTHOR("(c) 2001-2002 Denis Oliver Kropp <dok@convergence.de>");
97 MODULE_LICENSE("GPL");
98 MODULE_DESCRIPTION("FBDev driver for NeoMagic PCI Chips");
99 module_param(internal, bool, 0);
100 MODULE_PARM_DESC(internal, "Enable output on internal LCD Display.");
101 module_param(external, bool, 0);
102 MODULE_PARM_DESC(external, "Enable output on external CRT.");
103 module_param(libretto, bool, 0);
104 MODULE_PARM_DESC(libretto, "Force Libretto 100/110 800x480 LCD.");
105 module_param(nostretch, bool, 0);
106 MODULE_PARM_DESC(nostretch,
107 "Disable stretching of modes smaller than LCD.");
108 module_param(nopciburst, bool, 0);
109 MODULE_PARM_DESC(nopciburst, "Disable PCI burst mode.");
110 module_param(mode_option, charp, 0);
111 MODULE_PARM_DESC(mode_option, "Preferred video mode ('640x480-8@60', etc)");
116 /* --------------------------------------------------------------------- */
118 static biosMode bios8[] = {
127 static biosMode bios16[] = {
136 static biosMode bios24[] = {
142 #ifdef NO_32BIT_SUPPORT_YET
143 /* FIXME: guessed values, wrong */
144 static biosMode bios32[] = {
151 static inline void write_le32(int regindex, u32 val, const struct neofb_par *par)
153 writel(val, par->neo2200 + par->cursorOff + regindex);
156 static int neoFindMode(int xres, int yres, int depth)
164 size = ARRAY_SIZE(bios8);
168 size = ARRAY_SIZE(bios16);
172 size = ARRAY_SIZE(bios24);
175 #ifdef NO_32BIT_SUPPORT_YET
177 size = ARRAY_SIZE(bios32);
185 for (i = 0; i < size; i++) {
186 if (xres <= mode[i].x_res) {
187 xres_s = mode[i].x_res;
188 for (; i < size; i++) {
189 if (mode[i].x_res != xres_s)
190 return mode[i - 1].mode;
191 if (yres <= mode[i].y_res)
196 return mode[size - 1].mode;
202 * Determine the closest clock frequency to the one requested.
208 static void neoCalcVCLK(const struct fb_info *info,
209 struct neofb_par *par, long freq)
212 int n_best = 0, d_best = 0, f_best = 0;
213 long f_best_diff = 0x7ffff;
215 for (f = 0; f <= MAX_F; f++)
216 for (d = 0; d <= MAX_D; d++)
217 for (n = 0; n <= MAX_N; n++) {
221 f_out = ((14318 * (n + 1)) / (d + 1)) >> f;
222 f_diff = abs(f_out - freq);
223 if (f_diff <= f_best_diff) {
224 f_best_diff = f_diff;
233 if (info->fix.accel == FB_ACCEL_NEOMAGIC_NM2200 ||
234 info->fix.accel == FB_ACCEL_NEOMAGIC_NM2230 ||
235 info->fix.accel == FB_ACCEL_NEOMAGIC_NM2360 ||
236 info->fix.accel == FB_ACCEL_NEOMAGIC_NM2380) {
237 /* NOT_DONE: We are trying the full range of the 2200 clock.
238 We should be able to try n up to 2047 */
239 par->VCLK3NumeratorLow = n_best;
240 par->VCLK3NumeratorHigh = (f_best << 7);
242 par->VCLK3NumeratorLow = n_best | (f_best << 7);
244 par->VCLK3Denominator = d_best;
247 printk(KERN_DEBUG "neoVCLK: f:%ld NumLow=%d NumHi=%d Den=%d Df=%ld\n",
249 par->VCLK3NumeratorLow,
250 par->VCLK3NumeratorHigh,
251 par->VCLK3Denominator, f_best_diff);
257 * Handle the initialization, etc. of a screen.
258 * Return FALSE on failure.
261 static int vgaHWInit(const struct fb_var_screeninfo *var,
262 const struct fb_info *info,
263 struct neofb_par *par, struct xtimings *timings)
265 par->MiscOutReg = 0x23;
267 if (!(timings->sync & FB_SYNC_HOR_HIGH_ACT))
268 par->MiscOutReg |= 0x40;
270 if (!(timings->sync & FB_SYNC_VERT_HIGH_ACT))
271 par->MiscOutReg |= 0x80;
276 par->Sequencer[0] = 0x00;
277 par->Sequencer[1] = 0x01;
278 par->Sequencer[2] = 0x0F;
279 par->Sequencer[3] = 0x00; /* Font select */
280 par->Sequencer[4] = 0x0E; /* Misc */
285 par->CRTC[0] = (timings->HTotal >> 3) - 5;
286 par->CRTC[1] = (timings->HDisplay >> 3) - 1;
287 par->CRTC[2] = (timings->HDisplay >> 3) - 1;
288 par->CRTC[3] = (((timings->HTotal >> 3) - 1) & 0x1F) | 0x80;
289 par->CRTC[4] = (timings->HSyncStart >> 3);
290 par->CRTC[5] = ((((timings->HTotal >> 3) - 1) & 0x20) << 2)
291 | (((timings->HSyncEnd >> 3)) & 0x1F);
292 par->CRTC[6] = (timings->VTotal - 2) & 0xFF;
293 par->CRTC[7] = (((timings->VTotal - 2) & 0x100) >> 8)
294 | (((timings->VDisplay - 1) & 0x100) >> 7)
295 | ((timings->VSyncStart & 0x100) >> 6)
296 | (((timings->VDisplay - 1) & 0x100) >> 5)
297 | 0x10 | (((timings->VTotal - 2) & 0x200) >> 4)
298 | (((timings->VDisplay - 1) & 0x200) >> 3)
299 | ((timings->VSyncStart & 0x200) >> 2);
301 par->CRTC[9] = (((timings->VDisplay - 1) & 0x200) >> 4) | 0x40;
303 if (timings->dblscan)
304 par->CRTC[9] |= 0x80;
306 par->CRTC[10] = 0x00;
307 par->CRTC[11] = 0x00;
308 par->CRTC[12] = 0x00;
309 par->CRTC[13] = 0x00;
310 par->CRTC[14] = 0x00;
311 par->CRTC[15] = 0x00;
312 par->CRTC[16] = timings->VSyncStart & 0xFF;
313 par->CRTC[17] = (timings->VSyncEnd & 0x0F) | 0x20;
314 par->CRTC[18] = (timings->VDisplay - 1) & 0xFF;
315 par->CRTC[19] = var->xres_virtual >> 4;
316 par->CRTC[20] = 0x00;
317 par->CRTC[21] = (timings->VDisplay - 1) & 0xFF;
318 par->CRTC[22] = (timings->VTotal - 1) & 0xFF;
319 par->CRTC[23] = 0xC3;
320 par->CRTC[24] = 0xFF;
323 * are these unnecessary?
324 * vgaHWHBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN | KGA_ENABLE_ON_ZERO);
325 * vgaHWVBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN | KGA_ENABLE_ON_ZERO);
329 * Graphics Display Controller
331 par->Graphics[0] = 0x00;
332 par->Graphics[1] = 0x00;
333 par->Graphics[2] = 0x00;
334 par->Graphics[3] = 0x00;
335 par->Graphics[4] = 0x00;
336 par->Graphics[5] = 0x40;
337 par->Graphics[6] = 0x05; /* only map 64k VGA memory !!!! */
338 par->Graphics[7] = 0x0F;
339 par->Graphics[8] = 0xFF;
342 par->Attribute[0] = 0x00; /* standard colormap translation */
343 par->Attribute[1] = 0x01;
344 par->Attribute[2] = 0x02;
345 par->Attribute[3] = 0x03;
346 par->Attribute[4] = 0x04;
347 par->Attribute[5] = 0x05;
348 par->Attribute[6] = 0x06;
349 par->Attribute[7] = 0x07;
350 par->Attribute[8] = 0x08;
351 par->Attribute[9] = 0x09;
352 par->Attribute[10] = 0x0A;
353 par->Attribute[11] = 0x0B;
354 par->Attribute[12] = 0x0C;
355 par->Attribute[13] = 0x0D;
356 par->Attribute[14] = 0x0E;
357 par->Attribute[15] = 0x0F;
358 par->Attribute[16] = 0x41;
359 par->Attribute[17] = 0xFF;
360 par->Attribute[18] = 0x0F;
361 par->Attribute[19] = 0x00;
362 par->Attribute[20] = 0x00;
366 static void vgaHWLock(struct vgastate *state)
368 /* Protect CRTC[0-7] */
369 vga_wcrt(state->vgabase, 0x11, vga_rcrt(state->vgabase, 0x11) | 0x80);
372 static void vgaHWUnlock(void)
374 /* Unprotect CRTC[0-7] */
375 vga_wcrt(NULL, 0x11, vga_rcrt(NULL, 0x11) & ~0x80);
378 static void neoLock(struct vgastate *state)
380 vga_wgfx(state->vgabase, 0x09, 0x00);
384 static void neoUnlock(void)
387 vga_wgfx(NULL, 0x09, 0x26);
391 * VGA Palette management
393 static int paletteEnabled = 0;
395 static inline void VGAenablePalette(void)
397 vga_r(NULL, VGA_IS1_RC);
398 vga_w(NULL, VGA_ATT_W, 0x00);
402 static inline void VGAdisablePalette(void)
404 vga_r(NULL, VGA_IS1_RC);
405 vga_w(NULL, VGA_ATT_W, 0x20);
409 static inline void VGAwATTR(u8 index, u8 value)
416 vga_r(NULL, VGA_IS1_RC);
417 vga_wattr(NULL, index, value);
420 static void vgaHWProtect(int on)
426 * Turn off screen and disable sequencer.
428 tmp = vga_rseq(NULL, 0x01);
429 vga_wseq(NULL, 0x00, 0x01); /* Synchronous Reset */
430 vga_wseq(NULL, 0x01, tmp | 0x20); /* disable the display */
435 * Reenable sequencer, then turn on screen.
437 tmp = vga_rseq(NULL, 0x01);
438 vga_wseq(NULL, 0x01, tmp & ~0x20); /* reenable display */
439 vga_wseq(NULL, 0x00, 0x03); /* clear synchronousreset */
445 static void vgaHWRestore(const struct fb_info *info,
446 const struct neofb_par *par)
450 vga_w(NULL, VGA_MIS_W, par->MiscOutReg);
452 for (i = 1; i < 5; i++)
453 vga_wseq(NULL, i, par->Sequencer[i]);
455 /* Ensure CRTC registers 0-7 are unlocked by clearing bit 7 or CRTC[17] */
456 vga_wcrt(NULL, 17, par->CRTC[17] & ~0x80);
458 for (i = 0; i < 25; i++)
459 vga_wcrt(NULL, i, par->CRTC[i]);
461 for (i = 0; i < 9; i++)
462 vga_wgfx(NULL, i, par->Graphics[i]);
466 for (i = 0; i < 21; i++)
467 VGAwATTR(i, par->Attribute[i]);
473 /* -------------------- Hardware specific routines ------------------------- */
476 * Hardware Acceleration for Neo2200+
478 static inline int neo2200_sync(struct fb_info *info)
480 struct neofb_par *par = info->par;
482 while (readl(&par->neo2200->bltStat) & 1);
486 static inline void neo2200_wait_fifo(struct fb_info *info,
487 int requested_fifo_space)
489 // ndev->neo.waitfifo_calls++;
490 // ndev->neo.waitfifo_sum += requested_fifo_space;
492 /* FIXME: does not work
493 if (neo_fifo_space < requested_fifo_space)
495 neo_fifo_waitcycles++;
499 neo_fifo_space = (neo2200->bltStat >> 8);
500 if (neo_fifo_space >= requested_fifo_space)
506 neo_fifo_cache_hits++;
509 neo_fifo_space -= requested_fifo_space;
515 static inline void neo2200_accel_init(struct fb_info *info,
516 struct fb_var_screeninfo *var)
518 struct neofb_par *par = info->par;
519 Neo2200 __iomem *neo2200 = par->neo2200;
524 switch (var->bits_per_pixel) {
526 bltMod = NEO_MODE1_DEPTH8;
527 pitch = var->xres_virtual;
531 bltMod = NEO_MODE1_DEPTH16;
532 pitch = var->xres_virtual * 2;
535 bltMod = NEO_MODE1_DEPTH24;
536 pitch = var->xres_virtual * 3;
540 "neofb: neo2200_accel_init: unexpected bits per pixel!\n");
544 writel(bltMod << 16, &neo2200->bltStat);
545 writel((pitch << 16) | pitch, &neo2200->pitch);
548 /* --------------------------------------------------------------------- */
551 neofb_open(struct fb_info *info, int user)
553 struct neofb_par *par = info->par;
555 mutex_lock(&par->open_lock);
556 if (!par->ref_count) {
557 memset(&par->state, 0, sizeof(struct vgastate));
558 par->state.flags = VGA_SAVE_MODE | VGA_SAVE_FONTS;
559 save_vga(&par->state);
562 mutex_unlock(&par->open_lock);
568 neofb_release(struct fb_info *info, int user)
570 struct neofb_par *par = info->par;
572 mutex_lock(&par->open_lock);
573 if (!par->ref_count) {
574 mutex_unlock(&par->open_lock);
577 if (par->ref_count == 1) {
578 restore_vga(&par->state);
581 mutex_unlock(&par->open_lock);
587 neofb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
589 struct neofb_par *par = info->par;
590 unsigned int pixclock = var->pixclock;
591 struct xtimings timings;
595 DBG("neofb_check_var");
598 pixclock = 10000; /* 10ns = 100MHz */
599 timings.pixclock = 1000000000 / pixclock;
600 if (timings.pixclock < 1)
601 timings.pixclock = 1;
603 if (timings.pixclock > par->maxClock)
606 timings.dblscan = var->vmode & FB_VMODE_DOUBLE;
607 timings.interlaced = var->vmode & FB_VMODE_INTERLACED;
608 timings.HDisplay = var->xres;
609 timings.HSyncStart = timings.HDisplay + var->right_margin;
610 timings.HSyncEnd = timings.HSyncStart + var->hsync_len;
611 timings.HTotal = timings.HSyncEnd + var->left_margin;
612 timings.VDisplay = var->yres;
613 timings.VSyncStart = timings.VDisplay + var->lower_margin;
614 timings.VSyncEnd = timings.VSyncStart + var->vsync_len;
615 timings.VTotal = timings.VSyncEnd + var->upper_margin;
616 timings.sync = var->sync;
618 /* Is the mode larger than the LCD panel? */
619 if (par->internal_display &&
620 ((var->xres > par->NeoPanelWidth) ||
621 (var->yres > par->NeoPanelHeight))) {
623 "Mode (%dx%d) larger than the LCD panel (%dx%d)\n",
624 var->xres, var->yres, par->NeoPanelWidth,
625 par->NeoPanelHeight);
629 /* Is the mode one of the acceptable sizes? */
630 if (!par->internal_display)
635 if (var->yres == 1024)
639 if (var->yres == 768)
643 if (var->yres == (par->libretto ? 480 : 600))
647 if (var->yres == 480)
655 "Mode (%dx%d) won't display properly on LCD\n",
656 var->xres, var->yres);
660 var->red.msb_right = 0;
661 var->green.msb_right = 0;
662 var->blue.msb_right = 0;
663 var->transp.msb_right = 0;
665 switch (var->bits_per_pixel) {
666 case 8: /* PSEUDOCOLOUR, 256 */
667 var->transp.offset = 0;
668 var->transp.length = 0;
671 var->green.offset = 0;
672 var->green.length = 8;
673 var->blue.offset = 0;
674 var->blue.length = 8;
677 case 16: /* DIRECTCOLOUR, 64k */
678 var->transp.offset = 0;
679 var->transp.length = 0;
680 var->red.offset = 11;
682 var->green.offset = 5;
683 var->green.length = 6;
684 var->blue.offset = 0;
685 var->blue.length = 5;
688 case 24: /* TRUECOLOUR, 16m */
689 var->transp.offset = 0;
690 var->transp.length = 0;
691 var->red.offset = 16;
693 var->green.offset = 8;
694 var->green.length = 8;
695 var->blue.offset = 0;
696 var->blue.length = 8;
699 #ifdef NO_32BIT_SUPPORT_YET
700 case 32: /* TRUECOLOUR, 16m */
701 var->transp.offset = 24;
702 var->transp.length = 8;
703 var->red.offset = 16;
705 var->green.offset = 8;
706 var->green.length = 8;
707 var->blue.offset = 0;
708 var->blue.length = 8;
712 printk(KERN_WARNING "neofb: no support for %dbpp\n",
713 var->bits_per_pixel);
717 vramlen = info->fix.smem_len;
718 if (vramlen > 4 * 1024 * 1024)
719 vramlen = 4 * 1024 * 1024;
721 if (var->yres_virtual < var->yres)
722 var->yres_virtual = var->yres;
723 if (var->xres_virtual < var->xres)
724 var->xres_virtual = var->xres;
726 memlen = var->xres_virtual * var->bits_per_pixel * var->yres_virtual >> 3;
728 if (memlen > vramlen) {
729 var->yres_virtual = vramlen * 8 / (var->xres_virtual *
730 var->bits_per_pixel);
731 memlen = var->xres_virtual * var->bits_per_pixel *
732 var->yres_virtual / 8;
735 /* we must round yres/xres down, we already rounded y/xres_virtual up
736 if it was possible. We should return -EINVAL, but I disagree */
737 if (var->yres_virtual < var->yres)
738 var->yres = var->yres_virtual;
739 if (var->xres_virtual < var->xres)
740 var->xres = var->xres_virtual;
741 if (var->xoffset + var->xres > var->xres_virtual)
742 var->xoffset = var->xres_virtual - var->xres;
743 if (var->yoffset + var->yres > var->yres_virtual)
744 var->yoffset = var->yres_virtual - var->yres;
750 if (var->bits_per_pixel >= 24 || !par->neo2200)
751 var->accel_flags &= ~FB_ACCELF_TEXT;
755 static int neofb_set_par(struct fb_info *info)
757 struct neofb_par *par = info->par;
758 struct xtimings timings;
762 int hoffset, voffset;
764 DBG("neofb_set_par");
768 vgaHWProtect(1); /* Blank the screen */
770 timings.dblscan = info->var.vmode & FB_VMODE_DOUBLE;
771 timings.interlaced = info->var.vmode & FB_VMODE_INTERLACED;
772 timings.HDisplay = info->var.xres;
773 timings.HSyncStart = timings.HDisplay + info->var.right_margin;
774 timings.HSyncEnd = timings.HSyncStart + info->var.hsync_len;
775 timings.HTotal = timings.HSyncEnd + info->var.left_margin;
776 timings.VDisplay = info->var.yres;
777 timings.VSyncStart = timings.VDisplay + info->var.lower_margin;
778 timings.VSyncEnd = timings.VSyncStart + info->var.vsync_len;
779 timings.VTotal = timings.VSyncEnd + info->var.upper_margin;
780 timings.sync = info->var.sync;
781 timings.pixclock = PICOS2KHZ(info->var.pixclock);
783 if (timings.pixclock < 1)
784 timings.pixclock = 1;
787 * This will allocate the datastructure and initialize all of the
788 * generic VGA registers.
791 if (vgaHWInit(&info->var, info, par, &timings))
795 * The default value assigned by vgaHW.c is 0x41, but this does
796 * not work for NeoMagic.
798 par->Attribute[16] = 0x01;
800 switch (info->var.bits_per_pixel) {
802 par->CRTC[0x13] = info->var.xres_virtual >> 3;
803 par->ExtCRTOffset = info->var.xres_virtual >> 11;
804 par->ExtColorModeSelect = 0x11;
807 par->CRTC[0x13] = info->var.xres_virtual >> 2;
808 par->ExtCRTOffset = info->var.xres_virtual >> 10;
809 par->ExtColorModeSelect = 0x13;
812 par->CRTC[0x13] = (info->var.xres_virtual * 3) >> 3;
813 par->ExtCRTOffset = (info->var.xres_virtual * 3) >> 11;
814 par->ExtColorModeSelect = 0x14;
816 #ifdef NO_32BIT_SUPPORT_YET
817 case 32: /* FIXME: guessed values */
818 par->CRTC[0x13] = info->var.xres_virtual >> 1;
819 par->ExtCRTOffset = info->var.xres_virtual >> 9;
820 par->ExtColorModeSelect = 0x15;
827 par->ExtCRTDispAddr = 0x10;
829 /* Vertical Extension */
830 par->VerticalExt = (((timings.VTotal - 2) & 0x400) >> 10)
831 | (((timings.VDisplay - 1) & 0x400) >> 9)
832 | (((timings.VSyncStart) & 0x400) >> 8)
833 | (((timings.VSyncStart) & 0x400) >> 7);
835 /* Fast write bursts on unless disabled. */
837 par->SysIfaceCntl1 = 0x30;
839 par->SysIfaceCntl1 = 0x00;
841 par->SysIfaceCntl2 = 0xc0; /* VESA Bios sets this to 0x80! */
843 /* Initialize: by default, we want display config register to be read */
844 par->PanelDispCntlRegRead = 1;
846 /* Enable any user specified display devices. */
847 par->PanelDispCntlReg1 = 0x00;
848 if (par->internal_display)
849 par->PanelDispCntlReg1 |= 0x02;
850 if (par->external_display)
851 par->PanelDispCntlReg1 |= 0x01;
853 /* If the user did not specify any display devices, then... */
854 if (par->PanelDispCntlReg1 == 0x00) {
855 /* Default to internal (i.e., LCD) only. */
856 par->PanelDispCntlReg1 = vga_rgfx(NULL, 0x20) & 0x03;
859 /* If we are using a fixed mode, then tell the chip we are. */
860 switch (info->var.xres) {
862 par->PanelDispCntlReg1 |= 0x60;
865 par->PanelDispCntlReg1 |= 0x40;
868 par->PanelDispCntlReg1 |= 0x20;
875 /* Setup shadow register locking. */
876 switch (par->PanelDispCntlReg1 & 0x03) {
877 case 0x01: /* External CRT only mode: */
878 par->GeneralLockReg = 0x00;
879 /* We need to program the VCLK for external display only mode. */
880 par->ProgramVCLK = 1;
882 case 0x02: /* Internal LCD only mode: */
883 case 0x03: /* Simultaneous internal/external (LCD/CRT) mode: */
884 par->GeneralLockReg = 0x01;
885 /* Don't program the VCLK when using the LCD. */
886 par->ProgramVCLK = 0;
891 * If the screen is to be stretched, turn on stretching for the
894 * OPTION_LCD_STRETCH means stretching should be turned off!
896 par->PanelDispCntlReg2 = 0x00;
897 par->PanelDispCntlReg3 = 0x00;
899 if (par->lcd_stretch && (par->PanelDispCntlReg1 == 0x02) && /* LCD only */
900 (info->var.xres != par->NeoPanelWidth)) {
901 switch (info->var.xres) {
902 case 320: /* Needs testing. KEM -- 24 May 98 */
903 case 400: /* Needs testing. KEM -- 24 May 98 */
908 par->PanelDispCntlReg2 |= 0xC6;
912 /* No stretching in these modes. */
918 * If the screen is to be centerd, turn on the centering for the
921 par->PanelVertCenterReg1 = 0x00;
922 par->PanelVertCenterReg2 = 0x00;
923 par->PanelVertCenterReg3 = 0x00;
924 par->PanelVertCenterReg4 = 0x00;
925 par->PanelVertCenterReg5 = 0x00;
926 par->PanelHorizCenterReg1 = 0x00;
927 par->PanelHorizCenterReg2 = 0x00;
928 par->PanelHorizCenterReg3 = 0x00;
929 par->PanelHorizCenterReg4 = 0x00;
930 par->PanelHorizCenterReg5 = 0x00;
933 if (par->PanelDispCntlReg1 & 0x02) {
934 if (info->var.xres == par->NeoPanelWidth) {
936 * No centering required when the requested display width
937 * equals the panel width.
940 par->PanelDispCntlReg2 |= 0x01;
941 par->PanelDispCntlReg3 |= 0x10;
943 /* Calculate the horizontal and vertical offsets. */
946 ((par->NeoPanelWidth -
947 info->var.xres) >> 4) - 1;
949 ((par->NeoPanelHeight -
950 info->var.yres) >> 1) - 2;
952 /* Stretched modes cannot be centered. */
957 switch (info->var.xres) {
958 case 320: /* Needs testing. KEM -- 24 May 98 */
959 par->PanelHorizCenterReg3 = hoffset;
960 par->PanelVertCenterReg2 = voffset;
962 case 400: /* Needs testing. KEM -- 24 May 98 */
963 par->PanelHorizCenterReg4 = hoffset;
964 par->PanelVertCenterReg1 = voffset;
967 par->PanelHorizCenterReg1 = hoffset;
968 par->PanelVertCenterReg3 = voffset;
971 par->PanelHorizCenterReg2 = hoffset;
972 par->PanelVertCenterReg4 = voffset;
975 par->PanelHorizCenterReg5 = hoffset;
976 par->PanelVertCenterReg5 = voffset;
980 /* No centering in these modes. */
987 neoFindMode(info->var.xres, info->var.yres,
988 info->var.bits_per_pixel);
991 * Calculate the VCLK that most closely matches the requested dot
994 neoCalcVCLK(info, par, timings.pixclock);
996 /* Since we program the clocks ourselves, always use VCLK3. */
997 par->MiscOutReg |= 0x0C;
999 /* alread unlocked above */
1000 /* BOGUS vga_wgfx(NULL, 0x09, 0x26); */
1002 /* don't know what this is, but it's 0 from bootup anyway */
1003 vga_wgfx(NULL, 0x15, 0x00);
1005 /* was set to 0x01 by my bios in text and vesa modes */
1006 vga_wgfx(NULL, 0x0A, par->GeneralLockReg);
1009 * The color mode needs to be set before calling vgaHWRestore
1010 * to ensure the DAC is initialized properly.
1012 * NOTE: Make sure we don't change bits make sure we don't change
1013 * any reserved bits.
1015 temp = vga_rgfx(NULL, 0x90);
1016 switch (info->fix.accel) {
1017 case FB_ACCEL_NEOMAGIC_NM2070:
1018 temp &= 0xF0; /* Save bits 7:4 */
1019 temp |= (par->ExtColorModeSelect & ~0xF0);
1021 case FB_ACCEL_NEOMAGIC_NM2090:
1022 case FB_ACCEL_NEOMAGIC_NM2093:
1023 case FB_ACCEL_NEOMAGIC_NM2097:
1024 case FB_ACCEL_NEOMAGIC_NM2160:
1025 case FB_ACCEL_NEOMAGIC_NM2200:
1026 case FB_ACCEL_NEOMAGIC_NM2230:
1027 case FB_ACCEL_NEOMAGIC_NM2360:
1028 case FB_ACCEL_NEOMAGIC_NM2380:
1029 temp &= 0x70; /* Save bits 6:4 */
1030 temp |= (par->ExtColorModeSelect & ~0x70);
1034 vga_wgfx(NULL, 0x90, temp);
1037 * In some rare cases a lockup might occur if we don't delay
1038 * here. (Reported by Miles Lane)
1043 * Disable horizontal and vertical graphics and text expansions so
1044 * that vgaHWRestore works properly.
1046 temp = vga_rgfx(NULL, 0x25);
1048 vga_wgfx(NULL, 0x25, temp);
1051 * Sleep for 200ms to make sure that the two operations above have
1052 * had time to take effect.
1057 * This function handles restoring the generic VGA registers. */
1058 vgaHWRestore(info, par);
1060 /* linear colormap for non palettized modes */
1061 switch (info->var.bits_per_pixel) {
1063 /* PseudoColor, 256 */
1064 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
1067 /* TrueColor, 64k */
1068 info->fix.visual = FB_VISUAL_TRUECOLOR;
1070 for (i = 0; i < 64; i++) {
1073 outb(i << 1, 0x3c9);
1075 outb(i << 1, 0x3c9);
1079 #ifdef NO_32BIT_SUPPORT_YET
1082 /* TrueColor, 16m */
1083 info->fix.visual = FB_VISUAL_TRUECOLOR;
1085 for (i = 0; i < 256; i++) {
1095 vga_wgfx(NULL, 0x0E, par->ExtCRTDispAddr);
1096 vga_wgfx(NULL, 0x0F, par->ExtCRTOffset);
1097 temp = vga_rgfx(NULL, 0x10);
1098 temp &= 0x0F; /* Save bits 3:0 */
1099 temp |= (par->SysIfaceCntl1 & ~0x0F); /* VESA Bios sets bit 1! */
1100 vga_wgfx(NULL, 0x10, temp);
1102 vga_wgfx(NULL, 0x11, par->SysIfaceCntl2);
1103 vga_wgfx(NULL, 0x15, 0 /*par->SingleAddrPage */ );
1104 vga_wgfx(NULL, 0x16, 0 /*par->DualAddrPage */ );
1106 temp = vga_rgfx(NULL, 0x20);
1107 switch (info->fix.accel) {
1108 case FB_ACCEL_NEOMAGIC_NM2070:
1109 temp &= 0xFC; /* Save bits 7:2 */
1110 temp |= (par->PanelDispCntlReg1 & ~0xFC);
1112 case FB_ACCEL_NEOMAGIC_NM2090:
1113 case FB_ACCEL_NEOMAGIC_NM2093:
1114 case FB_ACCEL_NEOMAGIC_NM2097:
1115 case FB_ACCEL_NEOMAGIC_NM2160:
1116 temp &= 0xDC; /* Save bits 7:6,4:2 */
1117 temp |= (par->PanelDispCntlReg1 & ~0xDC);
1119 case FB_ACCEL_NEOMAGIC_NM2200:
1120 case FB_ACCEL_NEOMAGIC_NM2230:
1121 case FB_ACCEL_NEOMAGIC_NM2360:
1122 case FB_ACCEL_NEOMAGIC_NM2380:
1123 temp &= 0x98; /* Save bits 7,4:3 */
1124 temp |= (par->PanelDispCntlReg1 & ~0x98);
1127 vga_wgfx(NULL, 0x20, temp);
1129 temp = vga_rgfx(NULL, 0x25);
1130 temp &= 0x38; /* Save bits 5:3 */
1131 temp |= (par->PanelDispCntlReg2 & ~0x38);
1132 vga_wgfx(NULL, 0x25, temp);
1134 if (info->fix.accel != FB_ACCEL_NEOMAGIC_NM2070) {
1135 temp = vga_rgfx(NULL, 0x30);
1136 temp &= 0xEF; /* Save bits 7:5 and bits 3:0 */
1137 temp |= (par->PanelDispCntlReg3 & ~0xEF);
1138 vga_wgfx(NULL, 0x30, temp);
1141 vga_wgfx(NULL, 0x28, par->PanelVertCenterReg1);
1142 vga_wgfx(NULL, 0x29, par->PanelVertCenterReg2);
1143 vga_wgfx(NULL, 0x2a, par->PanelVertCenterReg3);
1145 if (info->fix.accel != FB_ACCEL_NEOMAGIC_NM2070) {
1146 vga_wgfx(NULL, 0x32, par->PanelVertCenterReg4);
1147 vga_wgfx(NULL, 0x33, par->PanelHorizCenterReg1);
1148 vga_wgfx(NULL, 0x34, par->PanelHorizCenterReg2);
1149 vga_wgfx(NULL, 0x35, par->PanelHorizCenterReg3);
1152 if (info->fix.accel == FB_ACCEL_NEOMAGIC_NM2160)
1153 vga_wgfx(NULL, 0x36, par->PanelHorizCenterReg4);
1155 if (info->fix.accel == FB_ACCEL_NEOMAGIC_NM2200 ||
1156 info->fix.accel == FB_ACCEL_NEOMAGIC_NM2230 ||
1157 info->fix.accel == FB_ACCEL_NEOMAGIC_NM2360 ||
1158 info->fix.accel == FB_ACCEL_NEOMAGIC_NM2380) {
1159 vga_wgfx(NULL, 0x36, par->PanelHorizCenterReg4);
1160 vga_wgfx(NULL, 0x37, par->PanelVertCenterReg5);
1161 vga_wgfx(NULL, 0x38, par->PanelHorizCenterReg5);
1166 /* Program VCLK3 if needed. */
1167 if (par->ProgramVCLK && ((vga_rgfx(NULL, 0x9B) != par->VCLK3NumeratorLow)
1168 || (vga_rgfx(NULL, 0x9F) != par->VCLK3Denominator)
1169 || (clock_hi && ((vga_rgfx(NULL, 0x8F) & ~0x0f)
1170 != (par->VCLK3NumeratorHigh &
1172 vga_wgfx(NULL, 0x9B, par->VCLK3NumeratorLow);
1174 temp = vga_rgfx(NULL, 0x8F);
1175 temp &= 0x0F; /* Save bits 3:0 */
1176 temp |= (par->VCLK3NumeratorHigh & ~0x0F);
1177 vga_wgfx(NULL, 0x8F, temp);
1179 vga_wgfx(NULL, 0x9F, par->VCLK3Denominator);
1183 vga_wcrt(NULL, 0x23, par->biosMode);
1185 vga_wgfx(NULL, 0x93, 0xc0); /* Gives 5x faster framebuffer writes !!! */
1187 /* Program vertical extension register */
1188 if (info->fix.accel == FB_ACCEL_NEOMAGIC_NM2200 ||
1189 info->fix.accel == FB_ACCEL_NEOMAGIC_NM2230 ||
1190 info->fix.accel == FB_ACCEL_NEOMAGIC_NM2360 ||
1191 info->fix.accel == FB_ACCEL_NEOMAGIC_NM2380) {
1192 vga_wcrt(NULL, 0x70, par->VerticalExt);
1195 vgaHWProtect(0); /* Turn on screen */
1197 /* Calling this also locks offset registers required in update_start */
1198 neoLock(&par->state);
1200 info->fix.line_length =
1201 info->var.xres_virtual * (info->var.bits_per_pixel >> 3);
1203 switch (info->fix.accel) {
1204 case FB_ACCEL_NEOMAGIC_NM2200:
1205 case FB_ACCEL_NEOMAGIC_NM2230:
1206 case FB_ACCEL_NEOMAGIC_NM2360:
1207 case FB_ACCEL_NEOMAGIC_NM2380:
1208 neo2200_accel_init(info, &info->var);
1216 static void neofb_update_start(struct fb_info *info,
1217 struct fb_var_screeninfo *var)
1219 struct neofb_par *par = info->par;
1220 struct vgastate *state = &par->state;
1221 int oldExtCRTDispAddr;
1224 DBG("neofb_update_start");
1226 Base = (var->yoffset * var->xres_virtual + var->xoffset) >> 2;
1227 Base *= (var->bits_per_pixel + 7) / 8;
1232 * These are the generic starting address registers.
1234 vga_wcrt(state->vgabase, 0x0C, (Base & 0x00FF00) >> 8);
1235 vga_wcrt(state->vgabase, 0x0D, (Base & 0x00FF));
1238 * Make sure we don't clobber some other bits that might already
1239 * have been set. NOTE: NM2200 has a writable bit 3, but it shouldn't
1242 oldExtCRTDispAddr = vga_rgfx(NULL, 0x0E);
1243 vga_wgfx(state->vgabase, 0x0E, (((Base >> 16) & 0x0f) | (oldExtCRTDispAddr & 0xf0)));
1249 * Pan or Wrap the Display
1251 static int neofb_pan_display(struct fb_var_screeninfo *var,
1252 struct fb_info *info)
1256 y_bottom = var->yoffset;
1258 if (!(var->vmode & FB_VMODE_YWRAP))
1259 y_bottom += var->yres;
1261 if (var->xoffset > (var->xres_virtual - var->xres))
1263 if (y_bottom > info->var.yres_virtual)
1266 neofb_update_start(info, var);
1268 info->var.xoffset = var->xoffset;
1269 info->var.yoffset = var->yoffset;
1271 if (var->vmode & FB_VMODE_YWRAP)
1272 info->var.vmode |= FB_VMODE_YWRAP;
1274 info->var.vmode &= ~FB_VMODE_YWRAP;
1278 static int neofb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
1279 u_int transp, struct fb_info *fb)
1281 if (regno >= fb->cmap.len || regno > 255)
1284 if (fb->var.bits_per_pixel <= 8) {
1287 outb(red >> 10, 0x3c9);
1288 outb(green >> 10, 0x3c9);
1289 outb(blue >> 10, 0x3c9);
1290 } else if (regno < 16) {
1291 switch (fb->var.bits_per_pixel) {
1293 ((u32 *) fb->pseudo_palette)[regno] =
1294 ((red & 0xf800)) | ((green & 0xfc00) >> 5) |
1295 ((blue & 0xf800) >> 11);
1298 ((u32 *) fb->pseudo_palette)[regno] =
1299 ((red & 0xff00) << 8) | ((green & 0xff00)) |
1300 ((blue & 0xff00) >> 8);
1302 #ifdef NO_32BIT_SUPPORT_YET
1304 ((u32 *) fb->pseudo_palette)[regno] =
1305 ((transp & 0xff00) << 16) | ((red & 0xff00) << 8) |
1306 ((green & 0xff00)) | ((blue & 0xff00) >> 8);
1318 * (Un)Blank the display.
1320 static int neofb_blank(int blank_mode, struct fb_info *info)
1323 * Blank the screen if blank_mode != 0, else unblank.
1324 * Return 0 if blanking succeeded, != 0 if un-/blanking failed due to
1325 * e.g. a video mode which doesn't support it. Implements VESA suspend
1326 * and powerdown modes for monitors, and backlight control on LCDs.
1327 * blank_mode == 0: unblanked (backlight on)
1328 * blank_mode == 1: blank (backlight on)
1329 * blank_mode == 2: suspend vsync (backlight off)
1330 * blank_mode == 3: suspend hsync (backlight off)
1331 * blank_mode == 4: powerdown (backlight off)
1333 * wms...Enable VESA DPMS compatible powerdown mode
1334 * run "setterm -powersave powerdown" to take advantage
1336 struct neofb_par *par = info->par;
1337 int seqflags, lcdflags, dpmsflags, reg, tmpdisp;
1340 * Read back the register bits related to display configuration. They might
1341 * have been changed underneath the driver via Fn key stroke.
1344 tmpdisp = vga_rgfx(NULL, 0x20) & 0x03;
1345 neoLock(&par->state);
1347 /* In case we blank the screen, we want to store the possibly new
1348 * configuration in the driver. During un-blank, we re-apply this setting,
1349 * since the LCD bit will be cleared in order to switch off the backlight.
1351 if (par->PanelDispCntlRegRead) {
1352 par->PanelDispCntlReg1 = tmpdisp;
1354 par->PanelDispCntlRegRead = !blank_mode;
1356 switch (blank_mode) {
1357 case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */
1358 seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */
1359 lcdflags = 0; /* LCD off */
1360 dpmsflags = NEO_GR01_SUPPRESS_HSYNC |
1361 NEO_GR01_SUPPRESS_VSYNC;
1362 #ifdef CONFIG_TOSHIBA
1363 /* Do we still need this ? */
1364 /* attempt to turn off backlight on toshiba; also turns off external */
1368 regs.eax = 0xff00; /* HCI_SET */
1369 regs.ebx = 0x0002; /* HCI_BACKLIGHT */
1370 regs.ecx = 0x0000; /* HCI_DISABLE */
1375 case FB_BLANK_HSYNC_SUSPEND: /* hsync off */
1376 seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */
1377 lcdflags = 0; /* LCD off */
1378 dpmsflags = NEO_GR01_SUPPRESS_HSYNC;
1380 case FB_BLANK_VSYNC_SUSPEND: /* vsync off */
1381 seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */
1382 lcdflags = 0; /* LCD off */
1383 dpmsflags = NEO_GR01_SUPPRESS_VSYNC;
1385 case FB_BLANK_NORMAL: /* just blank screen (backlight stays on) */
1386 seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */
1388 * During a blank operation with the LID shut, we might store "LCD off"
1389 * by mistake. Due to timing issues, the BIOS may switch the lights
1390 * back on, and we turn it back off once we "unblank".
1392 * So here is an attempt to implement ">=" - if we are in the process
1393 * of unblanking, and the LCD bit is unset in the driver but set in the
1394 * register, we must keep it.
1396 lcdflags = ((par->PanelDispCntlReg1 | tmpdisp) & 0x02); /* LCD normal */
1397 dpmsflags = 0x00; /* no hsync/vsync suppression */
1399 case FB_BLANK_UNBLANK: /* unblank */
1400 seqflags = 0; /* Enable sequencer */
1401 lcdflags = ((par->PanelDispCntlReg1 | tmpdisp) & 0x02); /* LCD normal */
1402 dpmsflags = 0x00; /* no hsync/vsync suppression */
1403 #ifdef CONFIG_TOSHIBA
1404 /* Do we still need this ? */
1405 /* attempt to re-enable backlight/external on toshiba */
1409 regs.eax = 0xff00; /* HCI_SET */
1410 regs.ebx = 0x0002; /* HCI_BACKLIGHT */
1411 regs.ecx = 0x0001; /* HCI_ENABLE */
1416 default: /* Anything else we don't understand; return 1 to tell
1417 * fb_blank we didn't aactually do anything */
1422 reg = (vga_rseq(NULL, 0x01) & ~0x20) | seqflags;
1423 vga_wseq(NULL, 0x01, reg);
1424 reg = (vga_rgfx(NULL, 0x20) & ~0x02) | lcdflags;
1425 vga_wgfx(NULL, 0x20, reg);
1426 reg = (vga_rgfx(NULL, 0x01) & ~0xF0) | 0x80 | dpmsflags;
1427 vga_wgfx(NULL, 0x01, reg);
1428 neoLock(&par->state);
1433 neo2200_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
1435 struct neofb_par *par = info->par;
1438 dst = rect->dx + rect->dy * info->var.xres_virtual;
1439 rop = rect->rop ? 0x060000 : 0x0c0000;
1441 neo2200_wait_fifo(info, 4);
1443 /* set blt control */
1444 writel(NEO_BC3_FIFO_EN |
1445 NEO_BC0_SRC_IS_FG | NEO_BC3_SKIP_MAPPING |
1446 // NEO_BC3_DST_XY_ADDR |
1447 // NEO_BC3_SRC_XY_ADDR |
1448 rop, &par->neo2200->bltCntl);
1450 switch (info->var.bits_per_pixel) {
1452 writel(rect->color, &par->neo2200->fgColor);
1456 writel(((u32 *) (info->pseudo_palette))[rect->color],
1457 &par->neo2200->fgColor);
1461 writel(dst * ((info->var.bits_per_pixel + 7) >> 3),
1462 &par->neo2200->dstStart);
1463 writel((rect->height << 16) | (rect->width & 0xffff),
1464 &par->neo2200->xyExt);
1468 neo2200_copyarea(struct fb_info *info, const struct fb_copyarea *area)
1470 u32 sx = area->sx, sy = area->sy, dx = area->dx, dy = area->dy;
1471 struct neofb_par *par = info->par;
1472 u_long src, dst, bltCntl;
1474 bltCntl = NEO_BC3_FIFO_EN | NEO_BC3_SKIP_MAPPING | 0x0C0000;
1476 if ((dy > sy) || ((dy == sy) && (dx > sx))) {
1477 /* Start with the lower right corner */
1478 sy += (area->height - 1);
1479 dy += (area->height - 1);
1480 sx += (area->width - 1);
1481 dx += (area->width - 1);
1483 bltCntl |= NEO_BC0_X_DEC | NEO_BC0_DST_Y_DEC | NEO_BC0_SRC_Y_DEC;
1486 src = sx * (info->var.bits_per_pixel >> 3) + sy*info->fix.line_length;
1487 dst = dx * (info->var.bits_per_pixel >> 3) + dy*info->fix.line_length;
1489 neo2200_wait_fifo(info, 4);
1491 /* set blt control */
1492 writel(bltCntl, &par->neo2200->bltCntl);
1494 writel(src, &par->neo2200->srcStart);
1495 writel(dst, &par->neo2200->dstStart);
1496 writel((area->height << 16) | (area->width & 0xffff),
1497 &par->neo2200->xyExt);
1501 neo2200_imageblit(struct fb_info *info, const struct fb_image *image)
1503 struct neofb_par *par = info->par;
1504 int s_pitch = (image->width * image->depth + 7) >> 3;
1505 int scan_align = info->pixmap.scan_align - 1;
1506 int buf_align = info->pixmap.buf_align - 1;
1507 int bltCntl_flags, d_pitch, data_len;
1509 // The data is padded for the hardware
1510 d_pitch = (s_pitch + scan_align) & ~scan_align;
1511 data_len = ((d_pitch * image->height) + buf_align) & ~buf_align;
1515 if (image->depth == 1) {
1516 if (info->var.bits_per_pixel == 24 && image->width < 16) {
1517 /* FIXME. There is a bug with accelerated color-expanded
1518 * transfers in 24 bit mode if the image being transferred
1519 * is less than 16 bits wide. This is due to insufficient
1520 * padding when writing the image. We need to adjust
1521 * struct fb_pixmap. Not yet done. */
1522 return cfb_imageblit(info, image);
1524 bltCntl_flags = NEO_BC0_SRC_MONO;
1525 } else if (image->depth == info->var.bits_per_pixel) {
1528 /* We don't currently support hardware acceleration if image
1529 * depth is different from display */
1530 return cfb_imageblit(info, image);
1533 switch (info->var.bits_per_pixel) {
1535 writel(image->fg_color, &par->neo2200->fgColor);
1536 writel(image->bg_color, &par->neo2200->bgColor);
1540 writel(((u32 *) (info->pseudo_palette))[image->fg_color],
1541 &par->neo2200->fgColor);
1542 writel(((u32 *) (info->pseudo_palette))[image->bg_color],
1543 &par->neo2200->bgColor);
1547 writel(NEO_BC0_SYS_TO_VID |
1548 NEO_BC3_SKIP_MAPPING | bltCntl_flags |
1549 // NEO_BC3_DST_XY_ADDR |
1550 0x0c0000, &par->neo2200->bltCntl);
1552 writel(0, &par->neo2200->srcStart);
1553 // par->neo2200->dstStart = (image->dy << 16) | (image->dx & 0xffff);
1554 writel(((image->dx & 0xffff) * (info->var.bits_per_pixel >> 3) +
1555 image->dy * info->fix.line_length), &par->neo2200->dstStart);
1556 writel((image->height << 16) | (image->width & 0xffff),
1557 &par->neo2200->xyExt);
1559 memcpy_toio(par->mmio_vbase + 0x100000, image->data, data_len);
1563 neofb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
1565 switch (info->fix.accel) {
1566 case FB_ACCEL_NEOMAGIC_NM2200:
1567 case FB_ACCEL_NEOMAGIC_NM2230:
1568 case FB_ACCEL_NEOMAGIC_NM2360:
1569 case FB_ACCEL_NEOMAGIC_NM2380:
1570 neo2200_fillrect(info, rect);
1573 cfb_fillrect(info, rect);
1579 neofb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
1581 switch (info->fix.accel) {
1582 case FB_ACCEL_NEOMAGIC_NM2200:
1583 case FB_ACCEL_NEOMAGIC_NM2230:
1584 case FB_ACCEL_NEOMAGIC_NM2360:
1585 case FB_ACCEL_NEOMAGIC_NM2380:
1586 neo2200_copyarea(info, area);
1589 cfb_copyarea(info, area);
1595 neofb_imageblit(struct fb_info *info, const struct fb_image *image)
1597 switch (info->fix.accel) {
1598 case FB_ACCEL_NEOMAGIC_NM2200:
1599 case FB_ACCEL_NEOMAGIC_NM2230:
1600 case FB_ACCEL_NEOMAGIC_NM2360:
1601 case FB_ACCEL_NEOMAGIC_NM2380:
1602 neo2200_imageblit(info, image);
1605 cfb_imageblit(info, image);
1611 neofb_sync(struct fb_info *info)
1613 switch (info->fix.accel) {
1614 case FB_ACCEL_NEOMAGIC_NM2200:
1615 case FB_ACCEL_NEOMAGIC_NM2230:
1616 case FB_ACCEL_NEOMAGIC_NM2360:
1617 case FB_ACCEL_NEOMAGIC_NM2380:
1628 neofb_draw_cursor(struct fb_info *info, u8 *dst, u8 *src, unsigned int width)
1630 //memset_io(info->sprite.addr, 0xff, 1);
1634 neofb_cursor(struct fb_info *info, struct fb_cursor *cursor)
1636 struct neofb_par *par = (struct neofb_par *) info->par;
1639 write_le32(NEOREG_CURSCNTL, ~NEO_CURS_ENABLE, par);
1641 if (cursor->set & FB_CUR_SETPOS) {
1642 u32 x = cursor->image.dx;
1643 u32 y = cursor->image.dy;
1645 info->cursor.image.dx = x;
1646 info->cursor.image.dy = y;
1647 write_le32(NEOREG_CURSX, x, par);
1648 write_le32(NEOREG_CURSY, y, par);
1651 if (cursor->set & FB_CUR_SETSIZE) {
1652 info->cursor.image.height = cursor->image.height;
1653 info->cursor.image.width = cursor->image.width;
1656 if (cursor->set & FB_CUR_SETHOT)
1657 info->cursor.hot = cursor->hot;
1659 if (cursor->set & FB_CUR_SETCMAP) {
1660 if (cursor->image.depth == 1) {
1661 u32 fg = cursor->image.fg_color;
1662 u32 bg = cursor->image.bg_color;
1664 info->cursor.image.fg_color = fg;
1665 info->cursor.image.bg_color = bg;
1667 fg = ((fg & 0xff0000) >> 16) | ((fg & 0xff) << 16) | (fg & 0xff00);
1668 bg = ((bg & 0xff0000) >> 16) | ((bg & 0xff) << 16) | (bg & 0xff00);
1669 write_le32(NEOREG_CURSFGCOLOR, fg, par);
1670 write_le32(NEOREG_CURSBGCOLOR, bg, par);
1674 if (cursor->set & FB_CUR_SETSHAPE)
1675 fb_load_cursor_image(info);
1677 if (info->cursor.enable)
1678 write_le32(NEOREG_CURSCNTL, NEO_CURS_ENABLE, par);
1683 static struct fb_ops neofb_ops = {
1684 .owner = THIS_MODULE,
1685 .fb_open = neofb_open,
1686 .fb_release = neofb_release,
1687 .fb_check_var = neofb_check_var,
1688 .fb_set_par = neofb_set_par,
1689 .fb_setcolreg = neofb_setcolreg,
1690 .fb_pan_display = neofb_pan_display,
1691 .fb_blank = neofb_blank,
1692 .fb_sync = neofb_sync,
1693 .fb_fillrect = neofb_fillrect,
1694 .fb_copyarea = neofb_copyarea,
1695 .fb_imageblit = neofb_imageblit,
1698 /* --------------------------------------------------------------------- */
1700 static struct fb_videomode __devinitdata mode800x480 = {
1710 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
1711 .vmode = FB_VMODE_NONINTERLACED
1714 static int __devinit neo_map_mmio(struct fb_info *info,
1715 struct pci_dev *dev)
1717 struct neofb_par *par = info->par;
1719 DBG("neo_map_mmio");
1721 switch (info->fix.accel) {
1722 case FB_ACCEL_NEOMAGIC_NM2070:
1723 info->fix.mmio_start = pci_resource_start(dev, 0)+
1726 case FB_ACCEL_NEOMAGIC_NM2090:
1727 case FB_ACCEL_NEOMAGIC_NM2093:
1728 info->fix.mmio_start = pci_resource_start(dev, 0)+
1731 case FB_ACCEL_NEOMAGIC_NM2160:
1732 case FB_ACCEL_NEOMAGIC_NM2097:
1733 case FB_ACCEL_NEOMAGIC_NM2200:
1734 case FB_ACCEL_NEOMAGIC_NM2230:
1735 case FB_ACCEL_NEOMAGIC_NM2360:
1736 case FB_ACCEL_NEOMAGIC_NM2380:
1737 info->fix.mmio_start = pci_resource_start(dev, 1);
1740 info->fix.mmio_start = pci_resource_start(dev, 0);
1742 info->fix.mmio_len = MMIO_SIZE;
1744 if (!request_mem_region
1745 (info->fix.mmio_start, MMIO_SIZE, "memory mapped I/O")) {
1746 printk("neofb: memory mapped IO in use\n");
1750 par->mmio_vbase = ioremap(info->fix.mmio_start, MMIO_SIZE);
1751 if (!par->mmio_vbase) {
1752 printk("neofb: unable to map memory mapped IO\n");
1753 release_mem_region(info->fix.mmio_start,
1754 info->fix.mmio_len);
1757 printk(KERN_INFO "neofb: mapped io at %p\n",
1762 static void neo_unmap_mmio(struct fb_info *info)
1764 struct neofb_par *par = info->par;
1766 DBG("neo_unmap_mmio");
1768 iounmap(par->mmio_vbase);
1769 par->mmio_vbase = NULL;
1771 release_mem_region(info->fix.mmio_start,
1772 info->fix.mmio_len);
1775 static int __devinit neo_map_video(struct fb_info *info,
1776 struct pci_dev *dev, int video_len)
1778 //unsigned long addr;
1780 DBG("neo_map_video");
1782 info->fix.smem_start = pci_resource_start(dev, 0);
1783 info->fix.smem_len = video_len;
1785 if (!request_mem_region(info->fix.smem_start, info->fix.smem_len,
1787 printk("neofb: frame buffer in use\n");
1792 ioremap(info->fix.smem_start, info->fix.smem_len);
1793 if (!info->screen_base) {
1794 printk("neofb: unable to map screen memory\n");
1795 release_mem_region(info->fix.smem_start,
1796 info->fix.smem_len);
1799 printk(KERN_INFO "neofb: mapped framebuffer at %p\n",
1803 ((struct neofb_par *)(info->par))->mtrr =
1804 mtrr_add(info->fix.smem_start, pci_resource_len(dev, 0),
1805 MTRR_TYPE_WRCOMB, 1);
1808 /* Clear framebuffer, it's all white in memory after boot */
1809 memset_io(info->screen_base, 0, info->fix.smem_len);
1811 /* Allocate Cursor drawing pad.
1812 info->fix.smem_len -= PAGE_SIZE;
1813 addr = info->fix.smem_start + info->fix.smem_len;
1814 write_le32(NEOREG_CURSMEMPOS, ((0x000f & (addr >> 10)) << 8) |
1815 ((0x0ff0 & (addr >> 10)) >> 4), par);
1816 addr = (unsigned long) info->screen_base + info->fix.smem_len;
1817 info->sprite.addr = (u8 *) addr; */
1821 static void neo_unmap_video(struct fb_info *info)
1823 DBG("neo_unmap_video");
1827 struct neofb_par *par = info->par;
1829 mtrr_del(par->mtrr, info->fix.smem_start,
1830 info->fix.smem_len);
1833 iounmap(info->screen_base);
1834 info->screen_base = NULL;
1836 release_mem_region(info->fix.smem_start,
1837 info->fix.smem_len);
1840 static int __devinit neo_scan_monitor(struct fb_info *info)
1842 struct neofb_par *par = info->par;
1843 unsigned char type, display;
1846 // Eventually we will have i2c support.
1847 info->monspecs.modedb = kmalloc(sizeof(struct fb_videomode), GFP_KERNEL);
1848 if (!info->monspecs.modedb)
1850 info->monspecs.modedb_len = 1;
1852 /* Determine the panel type */
1853 vga_wgfx(NULL, 0x09, 0x26);
1854 type = vga_rgfx(NULL, 0x21);
1855 display = vga_rgfx(NULL, 0x20);
1856 if (!par->internal_display && !par->external_display) {
1857 par->internal_display = display & 2 || !(display & 3) ? 1 : 0;
1858 par->external_display = display & 1;
1859 printk (KERN_INFO "Autodetected %s display\n",
1860 par->internal_display && par->external_display ? "simultaneous" :
1861 par->internal_display ? "internal" : "external");
1864 /* Determine panel width -- used in NeoValidMode. */
1865 w = vga_rgfx(NULL, 0x20);
1866 vga_wgfx(NULL, 0x09, 0x00);
1867 switch ((w & 0x18) >> 3) {
1870 par->NeoPanelWidth = 640;
1871 par->NeoPanelHeight = 480;
1872 memcpy(info->monspecs.modedb, &vesa_modes[3], sizeof(struct fb_videomode));
1875 par->NeoPanelWidth = 800;
1876 if (par->libretto) {
1877 par->NeoPanelHeight = 480;
1878 memcpy(info->monspecs.modedb, &mode800x480, sizeof(struct fb_videomode));
1881 par->NeoPanelHeight = 600;
1882 memcpy(info->monspecs.modedb, &vesa_modes[8], sizeof(struct fb_videomode));
1887 par->NeoPanelWidth = 1024;
1888 par->NeoPanelHeight = 768;
1889 memcpy(info->monspecs.modedb, &vesa_modes[13], sizeof(struct fb_videomode));
1892 /* 1280x1024@60 panel support needs to be added */
1894 par->NeoPanelWidth = 1280;
1895 par->NeoPanelHeight = 1024;
1896 memcpy(info->monspecs.modedb, &vesa_modes[20], sizeof(struct fb_videomode));
1900 "neofb: Only 640x480, 800x600/480 and 1024x768 panels are currently supported\n");
1905 par->NeoPanelWidth = 640;
1906 par->NeoPanelHeight = 480;
1907 memcpy(info->monspecs.modedb, &vesa_modes[3], sizeof(struct fb_videomode));
1911 printk(KERN_INFO "Panel is a %dx%d %s %s display\n",
1913 par->NeoPanelHeight,
1914 (type & 0x02) ? "color" : "monochrome",
1915 (type & 0x10) ? "TFT" : "dual scan");
1919 static int __devinit neo_init_hw(struct fb_info *info)
1921 struct neofb_par *par = info->par;
1923 int maxClock = 65000;
1924 int CursorMem = 1024;
1925 int CursorOff = 0x100;
1926 int linearSize = 1024;
1927 int maxWidth = 1024;
1928 int maxHeight = 1024;
1935 printk(KERN_DEBUG "--- Neo extended register dump ---\n");
1936 for (int w = 0; w < 0x85; w++)
1937 printk(KERN_DEBUG "CR %p: %p\n", (void *) w,
1938 (void *) vga_rcrt(NULL, w));
1939 for (int w = 0; w < 0xC7; w++)
1940 printk(KERN_DEBUG "GR %p: %p\n", (void *) w,
1941 (void *) vga_rgfx(NULL, w));
1943 switch (info->fix.accel) {
1944 case FB_ACCEL_NEOMAGIC_NM2070:
1953 case FB_ACCEL_NEOMAGIC_NM2090:
1954 case FB_ACCEL_NEOMAGIC_NM2093:
1963 case FB_ACCEL_NEOMAGIC_NM2097:
1972 case FB_ACCEL_NEOMAGIC_NM2160:
1981 case FB_ACCEL_NEOMAGIC_NM2200:
1988 maxHeight = 1024; /* ???? */
1990 par->neo2200 = (Neo2200 __iomem *) par->mmio_vbase;
1992 case FB_ACCEL_NEOMAGIC_NM2230:
1999 maxHeight = 1024; /* ???? */
2001 par->neo2200 = (Neo2200 __iomem *) par->mmio_vbase;
2003 case FB_ACCEL_NEOMAGIC_NM2360:
2010 maxHeight = 1024; /* ???? */
2012 par->neo2200 = (Neo2200 __iomem *) par->mmio_vbase;
2014 case FB_ACCEL_NEOMAGIC_NM2380:
2021 maxHeight = 1024; /* ???? */
2023 par->neo2200 = (Neo2200 __iomem *) par->mmio_vbase;
2027 info->sprite.size = CursorMem;
2028 info->sprite.scan_align = 1;
2029 info->sprite.buf_align = 1;
2030 info->sprite.flags = FB_PIXMAP_IO;
2031 info->sprite.outbuf = neofb_draw_cursor;
2033 par->maxClock = maxClock;
2034 par->cursorOff = CursorOff;
2035 return ((videoRam * 1024));
2039 static struct fb_info *__devinit neo_alloc_fb_info(struct pci_dev *dev, const struct
2042 struct fb_info *info;
2043 struct neofb_par *par;
2045 info = framebuffer_alloc(sizeof(struct neofb_par), &dev->dev);
2052 info->fix.accel = id->driver_data;
2054 mutex_init(&par->open_lock);
2055 par->pci_burst = !nopciburst;
2056 par->lcd_stretch = !nostretch;
2057 par->libretto = libretto;
2059 par->internal_display = internal;
2060 par->external_display = external;
2061 info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
2063 switch (info->fix.accel) {
2064 case FB_ACCEL_NEOMAGIC_NM2070:
2065 snprintf(info->fix.id, sizeof(info->fix.id),
2068 case FB_ACCEL_NEOMAGIC_NM2090:
2069 snprintf(info->fix.id, sizeof(info->fix.id),
2072 case FB_ACCEL_NEOMAGIC_NM2093:
2073 snprintf(info->fix.id, sizeof(info->fix.id),
2074 "MagicGraph 128ZV");
2076 case FB_ACCEL_NEOMAGIC_NM2097:
2077 snprintf(info->fix.id, sizeof(info->fix.id),
2078 "MagicGraph 128ZV+");
2080 case FB_ACCEL_NEOMAGIC_NM2160:
2081 snprintf(info->fix.id, sizeof(info->fix.id),
2082 "MagicGraph 128XD");
2084 case FB_ACCEL_NEOMAGIC_NM2200:
2085 snprintf(info->fix.id, sizeof(info->fix.id),
2086 "MagicGraph 256AV");
2087 info->flags |= FBINFO_HWACCEL_IMAGEBLIT |
2088 FBINFO_HWACCEL_COPYAREA |
2089 FBINFO_HWACCEL_FILLRECT;
2091 case FB_ACCEL_NEOMAGIC_NM2230:
2092 snprintf(info->fix.id, sizeof(info->fix.id),
2093 "MagicGraph 256AV+");
2094 info->flags |= FBINFO_HWACCEL_IMAGEBLIT |
2095 FBINFO_HWACCEL_COPYAREA |
2096 FBINFO_HWACCEL_FILLRECT;
2098 case FB_ACCEL_NEOMAGIC_NM2360:
2099 snprintf(info->fix.id, sizeof(info->fix.id),
2100 "MagicGraph 256ZX");
2101 info->flags |= FBINFO_HWACCEL_IMAGEBLIT |
2102 FBINFO_HWACCEL_COPYAREA |
2103 FBINFO_HWACCEL_FILLRECT;
2105 case FB_ACCEL_NEOMAGIC_NM2380:
2106 snprintf(info->fix.id, sizeof(info->fix.id),
2107 "MagicGraph 256XL+");
2108 info->flags |= FBINFO_HWACCEL_IMAGEBLIT |
2109 FBINFO_HWACCEL_COPYAREA |
2110 FBINFO_HWACCEL_FILLRECT;
2114 info->fix.type = FB_TYPE_PACKED_PIXELS;
2115 info->fix.type_aux = 0;
2116 info->fix.xpanstep = 0;
2117 info->fix.ypanstep = 4;
2118 info->fix.ywrapstep = 0;
2119 info->fix.accel = id->driver_data;
2121 info->fbops = &neofb_ops;
2122 info->pseudo_palette = par->palette;
2126 static void neo_free_fb_info(struct fb_info *info)
2130 * Free the colourmap
2132 fb_dealloc_cmap(&info->cmap);
2133 framebuffer_release(info);
2137 /* --------------------------------------------------------------------- */
2139 static int __devinit neofb_probe(struct pci_dev *dev,
2140 const struct pci_device_id *id)
2142 struct fb_info *info;
2143 u_int h_sync, v_sync;
2148 err = pci_enable_device(dev);
2153 info = neo_alloc_fb_info(dev, id);
2157 err = neo_map_mmio(info, dev);
2161 err = neo_scan_monitor(info);
2163 goto err_scan_monitor;
2165 video_len = neo_init_hw(info);
2166 if (video_len < 0) {
2171 err = neo_map_video(info, dev, video_len);
2175 if (!fb_find_mode(&info->var, info, mode_option, NULL, 0,
2176 info->monspecs.modedb, 16)) {
2177 printk(KERN_ERR "neofb: Unable to find usable video mode.\n");
2182 * Calculate the hsync and vsync frequencies. Note that
2183 * we split the 1e12 constant up so that we can preserve
2184 * the precision and fit the results into 32-bit registers.
2185 * (1953125000 * 512 = 1e12)
2187 h_sync = 1953125000 / info->var.pixclock;
2189 h_sync * 512 / (info->var.xres + info->var.left_margin +
2190 info->var.right_margin + info->var.hsync_len);
2192 h_sync / (info->var.yres + info->var.upper_margin +
2193 info->var.lower_margin + info->var.vsync_len);
2195 printk(KERN_INFO "neofb v" NEOFB_VERSION
2196 ": %dkB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
2197 info->fix.smem_len >> 10, info->var.xres,
2198 info->var.yres, h_sync / 1000, h_sync % 1000, v_sync);
2200 if (fb_alloc_cmap(&info->cmap, 256, 0) < 0)
2203 err = register_framebuffer(info);
2207 printk(KERN_INFO "fb%d: %s frame buffer device\n",
2208 info->node, info->fix.id);
2213 pci_set_drvdata(dev, info);
2217 fb_dealloc_cmap(&info->cmap);
2219 neo_unmap_video(info);
2221 fb_destroy_modedb(info->monspecs.modedb);
2223 neo_unmap_mmio(info);
2225 neo_free_fb_info(info);
2229 static void __devexit neofb_remove(struct pci_dev *dev)
2231 struct fb_info *info = pci_get_drvdata(dev);
2233 DBG("neofb_remove");
2237 * If unregister_framebuffer fails, then
2238 * we will be leaving hooks that could cause
2239 * oopsen laying around.
2241 if (unregister_framebuffer(info))
2243 "neofb: danger danger! Oopsen imminent!\n");
2245 neo_unmap_video(info);
2246 fb_destroy_modedb(info->monspecs.modedb);
2247 neo_unmap_mmio(info);
2248 neo_free_fb_info(info);
2251 * Ensure that the driver data is no longer
2254 pci_set_drvdata(dev, NULL);
2258 static struct pci_device_id neofb_devices[] = {
2259 {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2070,
2260 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2070},
2262 {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2090,
2263 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2090},
2265 {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2093,
2266 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2093},
2268 {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2097,
2269 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2097},
2271 {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2160,
2272 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2160},
2274 {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2200,
2275 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2200},
2277 {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2230,
2278 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2230},
2280 {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2360,
2281 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2360},
2283 {PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2380,
2284 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2380},
2286 {0, 0, 0, 0, 0, 0, 0}
2289 MODULE_DEVICE_TABLE(pci, neofb_devices);
2291 static struct pci_driver neofb_driver = {
2293 .id_table = neofb_devices,
2294 .probe = neofb_probe,
2295 .remove = __devexit_p(neofb_remove)
2298 /* ************************* init in-kernel code ************************** */
2301 static int __init neofb_setup(char *options)
2307 if (!options || !*options)
2310 while ((this_opt = strsep(&options, ",")) != NULL) {
2314 if (!strncmp(this_opt, "internal", 8))
2316 else if (!strncmp(this_opt, "external", 8))
2318 else if (!strncmp(this_opt, "nostretch", 9))
2320 else if (!strncmp(this_opt, "nopciburst", 10))
2322 else if (!strncmp(this_opt, "libretto", 8))
2325 mode_option = this_opt;
2331 static int __init neofb_init(void)
2334 char *option = NULL;
2336 if (fb_get_options("neofb", &option))
2338 neofb_setup(option);
2340 return pci_register_driver(&neofb_driver);
2343 module_init(neofb_init);
2346 static void __exit neofb_exit(void)
2348 pci_unregister_driver(&neofb_driver);
2351 module_exit(neofb_exit);