err.no Git - linux-2.6/blob - drivers/usb/serial/whiteheat.c

   1 /*
   2  * USB ConnectTech WhiteHEAT driver
   3  *
   4  *      Copyright (C) 2002
   5  *          Connect Tech Inc.
   6  *
   7  *      Copyright (C) 1999 - 2001
   8  *          Greg Kroah-Hartman (greg@kroah.com)
   9  *
  10  *      This program is free software; you can redistribute it and/or modify
  11  *      it under the terms of the GNU General Public License as published by
  12  *      the Free Software Foundation; either version 2 of the License, or
  13  *      (at your option) any later version.
  14  *
  15  * See Documentation/usb/usb-serial.txt for more information on using this driver
  16  *
  17  * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com)
  18  *      Upgrade to full working driver
  19  *
  20  * (05/30/2001) gkh
  21  *      switched from using spinlock to a semaphore, which fixes lots of problems.
  22  *
  23  * (04/08/2001) gb
  24  *      Identify version on module load.
  25  *
  26  * 2001_Mar_19 gkh
  27  *      Fixed MOD_INC and MOD_DEC logic, the ability to open a port more
  28  *      than once, and the got the proper usb_device_id table entries so
  29  *      the driver works again.
  30  *
  31  * (11/01/2000) Adam J. Richter
  32  *      usb_device_id table support
  33  *
  34  * (10/05/2000) gkh
  35  *      Fixed bug with urb->dev not being set properly, now that the usb
  36  *      core needs it.
  37  *
  38  * (10/03/2000) smd
  39  *      firmware is improved to guard against crap sent to device
  40  *      firmware now replies CMD_FAILURE on bad things
  41  *      read_callback fix you provided for private info struct
  42  *      command_finished now indicates success or fail
  43  *      setup_port struct now packed to avoid gcc padding
  44  *      firmware uses 1 based port numbering, driver now handles that
  45  *
  46  * (09/11/2000) gkh
  47  *      Removed DEBUG #ifdefs with call to usb_serial_debug_data
  48  *
  49  * (07/19/2000) gkh
  50  *      Added module_init and module_exit functions to handle the fact that this
  51  *      driver is a loadable module now.
  52  *      Fixed bug with port->minor that was found by Al Borchers
  53  *
  54  * (07/04/2000) gkh
  55  *      Added support for port settings. Baud rate can now be changed. Line signals
  56  *      are not transferred to and from the tty layer yet, but things seem to be
  57  *      working well now.
  58  *
  59  * (05/04/2000) gkh
  60  *      First cut at open and close commands. Data can flow through the ports at
  61  *      default speeds now.
  62  *
  63  * (03/26/2000) gkh
  64  *      Split driver up into device specific pieces.
  65  *
  66  */
  67
  68 #include <linux/kernel.h>
  69 #include <linux/errno.h>
  70 #include <linux/init.h>
  71 #include <linux/slab.h>
  72 #include <linux/tty.h>
  73 #include <linux/tty_driver.h>
  74 #include <linux/tty_flip.h>
  75 #include <linux/module.h>
  76 #include <linux/spinlock.h>
  77 #include <linux/mutex.h>
  78 #include <asm/uaccess.h>
  79 #include <asm/termbits.h>
  80 #include <linux/usb.h>
  81 #include <linux/serial_reg.h>
  82 #include <linux/serial.h>
  83 #include <linux/usb/serial.h>
  84 #include "whiteheat_fw.h"               /* firmware for the ConnectTech WhiteHEAT device */
  85 #include "whiteheat.h"                  /* WhiteHEAT specific commands */
  86
  87 static int debug;
  88
  89 #ifndef CMSPAR
  90 #define CMSPAR 0
  91 #endif
  92
  93 /*
  94  * Version Information
  95  */
  96 #define DRIVER_VERSION "v2.0"
  97 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>"
  98 #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
  99
 100 #define CONNECT_TECH_VENDOR_ID          0x0710
 101 #define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001
 102 #define CONNECT_TECH_WHITE_HEAT_ID      0x8001
 103
 104 /*
 105    ID tables for whiteheat are unusual, because we want to different
 106    things for different versions of the device.  Eventually, this
 107    will be doable from a single table.  But, for now, we define two
 108    separate ID tables, and then a third table that combines them
 109    just for the purpose of exporting the autoloading information.
 110 */
 111 static struct usb_device_id id_table_std [] = {
 112         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
 113         { }                                             /* Terminating entry */
 114 };
 115
 116 static struct usb_device_id id_table_prerenumeration [] = {
 117         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
 118         { }                                             /* Terminating entry */
 119 };
 120
 121 static struct usb_device_id id_table_combined [] = {
 122         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
 123         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
 124         { }                                             /* Terminating entry */
 125 };
 126
 127 MODULE_DEVICE_TABLE (usb, id_table_combined);
 128
 129 static struct usb_driver whiteheat_driver = {
 130         .name =         "whiteheat",
 131         .probe =        usb_serial_probe,
 132         .disconnect =   usb_serial_disconnect,
 133         .id_table =     id_table_combined,
 134         .no_dynamic_id =        1,
 135 };
 136
 137 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
 138 static int  whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id);
 139 static int  whiteheat_firmware_attach   (struct usb_serial *serial);
 140
 141 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
 142 static int  whiteheat_attach            (struct usb_serial *serial);
 143 static void whiteheat_shutdown          (struct usb_serial *serial);
 144 static int  whiteheat_open              (struct usb_serial_port *port, struct file *filp);
 145 static void whiteheat_close             (struct usb_serial_port *port, struct file *filp);
 146 static int  whiteheat_write             (struct usb_serial_port *port, const unsigned char *buf, int count);
 147 static int  whiteheat_write_room        (struct usb_serial_port *port);
 148 static int  whiteheat_ioctl             (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
 149 static void whiteheat_set_termios       (struct usb_serial_port *port, struct ktermios * old);
 150 static int  whiteheat_tiocmget          (struct usb_serial_port *port, struct file *file);
 151 static int  whiteheat_tiocmset          (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
 152 static void whiteheat_break_ctl         (struct usb_serial_port *port, int break_state);
 153 static int  whiteheat_chars_in_buffer   (struct usb_serial_port *port);
 154 static void whiteheat_throttle          (struct usb_serial_port *port);
 155 static void whiteheat_unthrottle        (struct usb_serial_port *port);
 156 static void whiteheat_read_callback     (struct urb *urb);
 157 static void whiteheat_write_callback    (struct urb *urb);
 158
 159 static struct usb_serial_driver whiteheat_fake_device = {
 160         .driver = {
 161                 .owner =        THIS_MODULE,
 162                 .name =         "whiteheatnofirm",
 163         },
 164         .description =          "Connect Tech - WhiteHEAT - (prerenumeration)",
 165         .usb_driver =           &whiteheat_driver,
 166         .id_table =             id_table_prerenumeration,
 167         .num_interrupt_in =     NUM_DONT_CARE,
 168         .num_bulk_in =          NUM_DONT_CARE,
 169         .num_bulk_out =         NUM_DONT_CARE,
 170         .num_ports =            1,
 171         .probe =                whiteheat_firmware_download,
 172         .attach =               whiteheat_firmware_attach,
 173 };
 174
 175 static struct usb_serial_driver whiteheat_device = {
 176         .driver = {
 177                 .owner =        THIS_MODULE,
 178                 .name =         "whiteheat",
 179         },
 180         .description =          "Connect Tech - WhiteHEAT",
 181         .usb_driver =           &whiteheat_driver,
 182         .id_table =             id_table_std,
 183         .num_interrupt_in =     NUM_DONT_CARE,
 184         .num_bulk_in =          NUM_DONT_CARE,
 185         .num_bulk_out =         NUM_DONT_CARE,
 186         .num_ports =            4,
 187         .attach =               whiteheat_attach,
 188         .shutdown =             whiteheat_shutdown,
 189         .open =                 whiteheat_open,
 190         .close =                whiteheat_close,
 191         .write =                whiteheat_write,
 192         .write_room =           whiteheat_write_room,
 193         .ioctl =                whiteheat_ioctl,
 194         .set_termios =          whiteheat_set_termios,
 195         .break_ctl =            whiteheat_break_ctl,
 196         .tiocmget =             whiteheat_tiocmget,
 197         .tiocmset =             whiteheat_tiocmset,
 198         .chars_in_buffer =      whiteheat_chars_in_buffer,
 199         .throttle =             whiteheat_throttle,
 200         .unthrottle =           whiteheat_unthrottle,
 201         .read_bulk_callback =   whiteheat_read_callback,
 202         .write_bulk_callback =  whiteheat_write_callback,
 203 };
 204
 205
 206 struct whiteheat_command_private {
 207         struct mutex            mutex;
 208         __u8                    port_running;
 209         __u8                    command_finished;
 210         wait_queue_head_t       wait_command;   /* for handling sleeping while waiting for a command to finish */
 211         __u8                    result_buffer[64];
 212 };
 213
 214
 215 #define THROTTLED               0x01
 216 #define ACTUALLY_THROTTLED      0x02
 217
 218 static int urb_pool_size = 8;
 219
 220 struct whiteheat_urb_wrap {
 221         struct list_head        list;
 222         struct urb              *urb;
 223 };
 224
 225 struct whiteheat_private {
 226         spinlock_t              lock;
 227         __u8                    flags;
 228         __u8                    mcr;
 229         struct list_head        rx_urbs_free;
 230         struct list_head        rx_urbs_submitted;
 231         struct list_head        rx_urb_q;
 232         struct work_struct      rx_work;
 233         struct usb_serial_port  *port;
 234         struct list_head        tx_urbs_free;
 235         struct list_head        tx_urbs_submitted;
 236         struct mutex            deathwarrant;
 237 };
 238
 239
 240 /* local function prototypes */
 241 static int start_command_port(struct usb_serial *serial);
 242 static void stop_command_port(struct usb_serial *serial);
 243 static void command_port_write_callback(struct urb *urb);
 244 static void command_port_read_callback(struct urb *urb);
 245
 246 static int start_port_read(struct usb_serial_port *port);
 247 static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, struct list_head *head);
 248 static struct list_head *list_first(struct list_head *head);
 249 static void rx_data_softint(struct work_struct *work);
 250
 251 static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize);
 252 static int firm_open(struct usb_serial_port *port);
 253 static int firm_close(struct usb_serial_port *port);
 254 static int firm_setup_port(struct usb_serial_port *port);
 255 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
 256 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
 257 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
 258 static int firm_purge(struct usb_serial_port *port, __u8 rxtx);
 259 static int firm_get_dtr_rts(struct usb_serial_port *port);
 260 static int firm_report_tx_done(struct usb_serial_port *port);
 261
 262
 263 #define COMMAND_PORT            4
 264 #define COMMAND_TIMEOUT         (2*HZ)  /* 2 second timeout for a command */
 265 #define COMMAND_TIMEOUT_MS      2000
 266 #define CLOSING_DELAY           (30 * HZ)
 267
 268
 269 /*****************************************************************************
 270  * Connect Tech's White Heat prerenumeration driver functions
 271  *****************************************************************************/
 272
 273 /* steps to download the firmware to the WhiteHEAT device:
 274  - hold the reset (by writing to the reset bit of the CPUCS register)
 275  - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD
 276  - release the reset (by writing to the CPUCS register)
 277  - download the WH.HEX file for all addresses greater than 0x1b3f using
 278    VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD
 279  - hold the reset
 280  - download the WH.HEX file for all addresses less than 0x1b40 using
 281    VENDOR_REQUEST_ANCHOR_LOAD
 282  - release the reset
 283  - device renumerated itself and comes up as new device id with all
 284    firmware download completed.
 285 */
 286 static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id)
 287 {
 288         int response;
 289         const struct whiteheat_hex_record *record;
 290
 291         dbg("%s", __FUNCTION__);
 292
 293         response = ezusb_set_reset (serial, 1);
 294
 295         record = &whiteheat_loader[0];
 296         while (record->address != 0xffff) {
 297                 response = ezusb_writememory (serial, record->address,
 298                                 (unsigned char *)record->data, record->data_size, 0xa0);
 299                 if (response < 0) {
 300                         err("%s - ezusb_writememory failed for loader (%d %04X %p %d)",
 301                                 __FUNCTION__, response, record->address, record->data, record->data_size);
 302                         break;
 303                 }
 304                 ++record;
 305         }
 306
 307         response = ezusb_set_reset (serial, 0);
 308
 309         record = &whiteheat_firmware[0];
 310         while (record->address < 0x1b40) {
 311                 ++record;
 312         }
 313         while (record->address != 0xffff) {
 314                 response = ezusb_writememory (serial, record->address,
 315                                 (unsigned char *)record->data, record->data_size, 0xa3);
 316                 if (response < 0) {
 317                         err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)",
 318                                 __FUNCTION__, response, record->address, record->data, record->data_size);
 319                         break;
 320                 }
 321                 ++record;
 322         }
 323
 324         response = ezusb_set_reset (serial, 1);
 325
 326         record = &whiteheat_firmware[0];
 327         while (record->address < 0x1b40) {
 328                 response = ezusb_writememory (serial, record->address,
 329                                 (unsigned char *)record->data, record->data_size, 0xa0);
 330                 if (response < 0) {
 331                         err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)",
 332                                 __FUNCTION__, response, record->address, record->data, record->data_size);
 333                         break;
 334                 }
 335                 ++record;
 336         }
 337
 338         response = ezusb_set_reset (serial, 0);
 339
 340         return 0;
 341 }
 342
 343
 344 static int whiteheat_firmware_attach (struct usb_serial *serial)
 345 {
 346         /* We want this device to fail to have a driver assigned to it */
 347         return 1;
 348 }
 349
 350
 351 /*****************************************************************************
 352  * Connect Tech's White Heat serial driver functions
 353  *****************************************************************************/
 354 static int whiteheat_attach (struct usb_serial *serial)
 355 {
 356         struct usb_serial_port *command_port;
 357         struct whiteheat_command_private *command_info;
 358         struct usb_serial_port *port;
 359         struct whiteheat_private *info;
 360         struct whiteheat_hw_info *hw_info;
 361         int pipe;
 362         int ret;
 363         int alen;
 364         __u8 *command;
 365         __u8 *result;
 366         int i;
 367         int j;
 368         struct urb *urb;
 369         int buf_size;
 370         struct whiteheat_urb_wrap *wrap;
 371         struct list_head *tmp;
 372
 373         command_port = serial->port[COMMAND_PORT];
 374
 375         pipe = usb_sndbulkpipe (serial->dev, command_port->bulk_out_endpointAddress);
 376         command = kmalloc(2, GFP_KERNEL);
 377         if (!command)
 378                 goto no_command_buffer;
 379         command[0] = WHITEHEAT_GET_HW_INFO;
 380         command[1] = 0;
 381
 382         result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
 383         if (!result)
 384                 goto no_result_buffer;
 385         /*
 386          * When the module is reloaded the firmware is still there and
 387          * the endpoints are still in the usb core unchanged. This is the
 388          * unlinking bug in disguise. Same for the call below.
 389          */
 390         usb_clear_halt(serial->dev, pipe);
 391         ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS);
 392         if (ret) {
 393                 err("%s: Couldn't send command [%d]", serial->type->description, ret);
 394                 goto no_firmware;
 395         } else if (alen != 2) {
 396                 err("%s: Send command incomplete [%d]", serial->type->description, alen);
 397                 goto no_firmware;
 398         }
 399
 400         pipe = usb_rcvbulkpipe (serial->dev, command_port->bulk_in_endpointAddress);
 401         /* See the comment on the usb_clear_halt() above */
 402         usb_clear_halt(serial->dev, pipe);
 403         ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
 404         if (ret) {
 405                 err("%s: Couldn't get results [%d]", serial->type->description, ret);
 406                 goto no_firmware;
 407         } else if (alen != sizeof(*hw_info) + 1) {
 408                 err("%s: Get results incomplete [%d]", serial->type->description, alen);
 409                 goto no_firmware;
 410         } else if (result[0] != command[0]) {
 411                 err("%s: Command failed [%d]", serial->type->description, result[0]);
 412                 goto no_firmware;
 413         }
 414
 415         hw_info = (struct whiteheat_hw_info *)&result[1];
 416
 417         info("%s: Driver %s: Firmware v%d.%02d", serial->type->description,
 418              DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev);
 419
 420         for (i = 0; i < serial->num_ports; i++) {
 421                 port = serial->port[i];
 422
 423                 info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
 424                 if (info == NULL) {
 425                         err("%s: Out of memory for port structures\n", serial->type->description);
 426                         goto no_private;
 427                 }
 428
 429                 spin_lock_init(&info->lock);
 430                 mutex_init(&info->deathwarrant);
 431                 info->flags = 0;
 432                 info->mcr = 0;
 433                 INIT_WORK(&info->rx_work, rx_data_softint);
 434                 info->port = port;
 435
 436                 INIT_LIST_HEAD(&info->rx_urbs_free);
 437                 INIT_LIST_HEAD(&info->rx_urbs_submitted);
 438                 INIT_LIST_HEAD(&info->rx_urb_q);
 439                 INIT_LIST_HEAD(&info->tx_urbs_free);
 440                 INIT_LIST_HEAD(&info->tx_urbs_submitted);
 441
 442                 for (j = 0; j < urb_pool_size; j++) {
 443                         urb = usb_alloc_urb(0, GFP_KERNEL);
 444                         if (!urb) {
 445                                 err("No free urbs available");
 446                                 goto no_rx_urb;
 447                         }
 448                         buf_size = port->read_urb->transfer_buffer_length;
 449                         urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
 450                         if (!urb->transfer_buffer) {
 451                                 err("Couldn't allocate urb buffer");
 452                                 goto no_rx_buf;
 453                         }
 454                         wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
 455                         if (!wrap) {
 456                                 err("Couldn't allocate urb wrapper");
 457                                 goto no_rx_wrap;
 458                         }
 459                         usb_fill_bulk_urb(urb, serial->dev,
 460                                         usb_rcvbulkpipe(serial->dev,
 461                                                 port->bulk_in_endpointAddress),
 462                                         urb->transfer_buffer, buf_size,
 463                                         whiteheat_read_callback, port);
 464                         wrap->urb = urb;
 465                         list_add(&wrap->list, &info->rx_urbs_free);
 466
 467                         urb = usb_alloc_urb(0, GFP_KERNEL);
 468                         if (!urb) {
 469                                 err("No free urbs available");
 470                                 goto no_tx_urb;
 471                         }
 472                         buf_size = port->write_urb->transfer_buffer_length;
 473                         urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
 474                         if (!urb->transfer_buffer) {
 475                                 err("Couldn't allocate urb buffer");
 476                                 goto no_tx_buf;
 477                         }
 478                         wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
 479                         if (!wrap) {
 480                                 err("Couldn't allocate urb wrapper");
 481                                 goto no_tx_wrap;
 482                         }
 483                         usb_fill_bulk_urb(urb, serial->dev,
 484                                         usb_sndbulkpipe(serial->dev,
 485                                                 port->bulk_out_endpointAddress),
 486                                         urb->transfer_buffer, buf_size,
 487                                         whiteheat_write_callback, port);
 488                         wrap->urb = urb;
 489                         list_add(&wrap->list, &info->tx_urbs_free);
 490                 }
 491
 492                 usb_set_serial_port_data(port, info);
 493         }
 494
 495         command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL);
 496         if (command_info == NULL) {
 497                 err("%s: Out of memory for port structures\n", serial->type->description);
 498                 goto no_command_private;
 499         }
 500
 501         mutex_init(&command_info->mutex);
 502         command_info->port_running = 0;
 503         init_waitqueue_head(&command_info->wait_command);
 504         usb_set_serial_port_data(command_port, command_info);
 505         command_port->write_urb->complete = command_port_write_callback;
 506         command_port->read_urb->complete = command_port_read_callback;
 507         kfree(result);
 508         kfree(command);
 509
 510         return 0;
 511
 512 no_firmware:
 513         /* Firmware likely not running */
 514         err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description);
 515         err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description);
 516         err("%s: please contact support@connecttech.com\n", serial->type->description);
 517         kfree(result);
 518         return -ENODEV;
 519
 520 no_command_private:
 521         for (i = serial->num_ports - 1; i >= 0; i--) {
 522                 port = serial->port[i];
 523                 info = usb_get_serial_port_data(port);
 524                 for (j = urb_pool_size - 1; j >= 0; j--) {
 525                         tmp = list_first(&info->tx_urbs_free);
 526                         list_del(tmp);
 527                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 528                         urb = wrap->urb;
 529                         kfree(wrap);
 530 no_tx_wrap:
 531                         kfree(urb->transfer_buffer);
 532 no_tx_buf:
 533                         usb_free_urb(urb);
 534 no_tx_urb:
 535                         tmp = list_first(&info->rx_urbs_free);
 536                         list_del(tmp);
 537                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 538                         urb = wrap->urb;
 539                         kfree(wrap);
 540 no_rx_wrap:
 541                         kfree(urb->transfer_buffer);
 542 no_rx_buf:
 543                         usb_free_urb(urb);
 544 no_rx_urb:
 545                         ;
 546                 }
 547                 kfree(info);
 548 no_private:
 549                 ;
 550         }
 551         kfree(result);
 552 no_result_buffer:
 553         kfree(command);
 554 no_command_buffer:
 555         return -ENOMEM;
 556 }
 557
 558
 559 static void whiteheat_shutdown (struct usb_serial *serial)
 560 {
 561         struct usb_serial_port *command_port;
 562         struct usb_serial_port *port;
 563         struct whiteheat_private *info;
 564         struct whiteheat_urb_wrap *wrap;
 565         struct urb *urb;
 566         struct list_head *tmp;
 567         struct list_head *tmp2;
 568         int i;
 569
 570         dbg("%s", __FUNCTION__);
 571
 572         /* free up our private data for our command port */
 573         command_port = serial->port[COMMAND_PORT];
 574         kfree (usb_get_serial_port_data(command_port));
 575
 576         for (i = 0; i < serial->num_ports; i++) {
 577                 port = serial->port[i];
 578                 info = usb_get_serial_port_data(port);
 579                 list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
 580                         list_del(tmp);
 581                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 582                         urb = wrap->urb;
 583                         kfree(wrap);
 584                         kfree(urb->transfer_buffer);
 585                         usb_free_urb(urb);
 586                 }
 587                 list_for_each_safe(tmp, tmp2, &info->tx_urbs_free) {
 588                         list_del(tmp);
 589                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 590                         urb = wrap->urb;
 591                         kfree(wrap);
 592                         kfree(urb->transfer_buffer);
 593                         usb_free_urb(urb);
 594                 }
 595                 kfree(info);
 596         }
 597
 598         return;
 599 }
 600
 601
 602 static int whiteheat_open (struct usb_serial_port *port, struct file *filp)
 603 {
 604         int             retval = 0;
 605         struct ktermios old_term;
 606
 607         dbg("%s - port %d", __FUNCTION__, port->number);
 608
 609         retval = start_command_port(port->serial);
 610         if (retval)
 611                 goto exit;
 612
 613         if (port->tty)
 614                 port->tty->low_latency = 1;
 615
 616         /* send an open port command */
 617         retval = firm_open(port);
 618         if (retval) {
 619                 stop_command_port(port->serial);
 620                 goto exit;
 621         }
 622
 623         retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX);
 624         if (retval) {
 625                 firm_close(port);
 626                 stop_command_port(port->serial);
 627                 goto exit;
 628         }
 629
 630         old_term.c_cflag = ~port->tty->termios->c_cflag;
 631         old_term.c_iflag = ~port->tty->termios->c_iflag;
 632         whiteheat_set_termios(port, &old_term);
 633
 634         /* Work around HCD bugs */
 635         usb_clear_halt(port->serial->dev, port->read_urb->pipe);
 636         usb_clear_halt(port->serial->dev, port->write_urb->pipe);
 637
 638         /* Start reading from the device */
 639         retval = start_port_read(port);
 640         if (retval) {
 641                 err("%s - failed submitting read urb, error %d", __FUNCTION__, retval);
 642                 firm_close(port);
 643                 stop_command_port(port->serial);
 644                 goto exit;
 645         }
 646
 647 exit:
 648         dbg("%s - exit, retval = %d", __FUNCTION__, retval);
 649         return retval;
 650 }
 651
 652
 653 static void whiteheat_close(struct usb_serial_port *port, struct file * filp)
 654 {
 655         struct whiteheat_private *info = usb_get_serial_port_data(port);
 656         struct whiteheat_urb_wrap *wrap;
 657         struct urb *urb;
 658         struct list_head *tmp;
 659         struct list_head *tmp2;
 660
 661         dbg("%s - port %d", __FUNCTION__, port->number);
 662
 663         /* filp is NULL when called from usb_serial_disconnect */
 664         if (filp && (tty_hung_up_p(filp))) {
 665                 return;
 666         }
 667
 668         port->tty->closing = 1;
 669
 670 /*
 671  * Not currently in use; tty_wait_until_sent() calls
 672  * serial_chars_in_buffer() which deadlocks on the second semaphore
 673  * acquisition. This should be fixed at some point. Greg's been
 674  * notified.
 675         if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) {
 676                 tty_wait_until_sent(port->tty, CLOSING_DELAY);
 677         }
 678 */
 679
 680         if (port->tty->driver->flush_buffer)
 681                 port->tty->driver->flush_buffer(port->tty);
 682         tty_ldisc_flush(port->tty);
 683
 684         firm_report_tx_done(port);
 685
 686         firm_close(port);
 687
 688 printk(KERN_ERR"Before processing rx_urbs_submitted.\n");
 689         /* shutdown our bulk reads and writes */
 690         mutex_lock(&info->deathwarrant);
 691         spin_lock_irq(&info->lock);
 692         list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
 693                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 694                 urb = wrap->urb;
 695                 list_del(tmp);
 696                 spin_unlock_irq(&info->lock);
 697                 usb_kill_urb(urb);
 698                 spin_lock_irq(&info->lock);
 699                 list_add(tmp, &info->rx_urbs_free);
 700         }
 701         list_for_each_safe(tmp, tmp2, &info->rx_urb_q)
 702                 list_move(tmp, &info->rx_urbs_free);
 703         list_for_each_safe(tmp, tmp2, &info->tx_urbs_submitted) {
 704                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 705                 urb = wrap->urb;
 706                 list_del(tmp);
 707                 spin_unlock_irq(&info->lock);
 708                 usb_kill_urb(urb);
 709                 spin_lock_irq(&info->lock);
 710                 list_add(tmp, &info->tx_urbs_free);
 711         }
 712         spin_unlock_irq(&info->lock);
 713         mutex_unlock(&info->deathwarrant);
 714
 715         stop_command_port(port->serial);
 716
 717         port->tty->closing = 0;
 718 }
 719
 720
 721 static int whiteheat_write(struct usb_serial_port *port, const unsigned char *buf, int count)
 722 {
 723         struct usb_serial *serial = port->serial;
 724         struct whiteheat_private *info = usb_get_serial_port_data(port);
 725         struct whiteheat_urb_wrap *wrap;
 726         struct urb *urb;
 727         int result;
 728         int bytes;
 729         int sent = 0;
 730         unsigned long flags;
 731         struct list_head *tmp;
 732
 733         dbg("%s - port %d", __FUNCTION__, port->number);
 734
 735         if (count == 0) {
 736                 dbg("%s - write request of 0 bytes", __FUNCTION__);
 737                 return (0);
 738         }
 739
 740         while (count) {
 741                 spin_lock_irqsave(&info->lock, flags);
 742                 if (list_empty(&info->tx_urbs_free)) {
 743                         spin_unlock_irqrestore(&info->lock, flags);
 744                         break;
 745                 }
 746                 tmp = list_first(&info->tx_urbs_free);
 747                 list_del(tmp);
 748                 spin_unlock_irqrestore(&info->lock, flags);
 749
 750                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 751                 urb = wrap->urb;
 752                 bytes = (count > port->bulk_out_size) ? port->bulk_out_size : count;
 753                 memcpy (urb->transfer_buffer, buf + sent, bytes);
 754
 755                 usb_serial_debug_data(debug, &port->dev, __FUNCTION__, bytes, urb->transfer_buffer);
 756
 757                 urb->dev = serial->dev;
 758                 urb->transfer_buffer_length = bytes;
 759                 result = usb_submit_urb(urb, GFP_ATOMIC);
 760                 if (result) {
 761                         err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
 762                         sent = result;
 763                         spin_lock_irqsave(&info->lock, flags);
 764                         list_add(tmp, &info->tx_urbs_free);
 765                         spin_unlock_irqrestore(&info->lock, flags);
 766                         break;
 767                 } else {
 768                         sent += bytes;
 769                         count -= bytes;
 770                         spin_lock_irqsave(&info->lock, flags);
 771                         list_add(tmp, &info->tx_urbs_submitted);
 772                         spin_unlock_irqrestore(&info->lock, flags);
 773                 }
 774         }
 775
 776         return sent;
 777 }
 778
 779
 780 static int whiteheat_write_room(struct usb_serial_port *port)
 781 {
 782         struct whiteheat_private *info = usb_get_serial_port_data(port);
 783         struct list_head *tmp;
 784         int room = 0;
 785         unsigned long flags;
 786
 787         dbg("%s - port %d", __FUNCTION__, port->number);
 788
 789         spin_lock_irqsave(&info->lock, flags);
 790         list_for_each(tmp, &info->tx_urbs_free)
 791                 room++;
 792         spin_unlock_irqrestore(&info->lock, flags);
 793         room *= port->bulk_out_size;
 794
 795         dbg("%s - returns %d", __FUNCTION__, room);
 796         return (room);
 797 }
 798
 799
 800 static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file)
 801 {
 802         struct whiteheat_private *info = usb_get_serial_port_data(port);
 803         unsigned int modem_signals = 0;
 804
 805         dbg("%s - port %d", __FUNCTION__, port->number);
 806
 807         firm_get_dtr_rts(port);
 808         if (info->mcr & UART_MCR_DTR)
 809                 modem_signals |= TIOCM_DTR;
 810         if (info->mcr & UART_MCR_RTS)
 811                 modem_signals |= TIOCM_RTS;
 812
 813         return modem_signals;
 814 }
 815
 816
 817 static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file,
 818                                unsigned int set, unsigned int clear)
 819 {
 820         struct whiteheat_private *info = usb_get_serial_port_data(port);
 821
 822         dbg("%s - port %d", __FUNCTION__, port->number);
 823
 824         if (set & TIOCM_RTS)
 825                 info->mcr |= UART_MCR_RTS;
 826         if (set & TIOCM_DTR)
 827                 info->mcr |= UART_MCR_DTR;
 828
 829         if (clear & TIOCM_RTS)
 830                 info->mcr &= ~UART_MCR_RTS;
 831         if (clear & TIOCM_DTR)
 832                 info->mcr &= ~UART_MCR_DTR;
 833
 834         firm_set_dtr(port, info->mcr & UART_MCR_DTR);
 835         firm_set_rts(port, info->mcr & UART_MCR_RTS);
 836         return 0;
 837 }
 838
 839
 840 static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
 841 {
 842         struct serial_struct serstruct;
 843         void __user *user_arg = (void __user *)arg;
 844
 845         dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
 846
 847         switch (cmd) {
 848                 case TIOCGSERIAL:
 849                         memset(&serstruct, 0, sizeof(serstruct));
 850                         serstruct.type = PORT_16654;
 851                         serstruct.line = port->serial->minor;
 852                         serstruct.port = port->number;
 853                         serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 854                         serstruct.xmit_fifo_size = port->bulk_out_size;
 855                         serstruct.custom_divisor = 0;
 856                         serstruct.baud_base = 460800;
 857                         serstruct.close_delay = CLOSING_DELAY;
 858                         serstruct.closing_wait = CLOSING_DELAY;
 859
 860                         if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
 861                                 return -EFAULT;
 862
 863                         break;
 864
 865                 case TIOCSSERIAL:
 866                         if (copy_from_user(&serstruct, user_arg, sizeof(serstruct)))
 867                                 return -EFAULT;
 868
 869                         /*
 870                          * For now this is ignored. dip sets the ASYNC_[V]HI flags
 871                          * but this isn't used by us at all. Maybe someone somewhere
 872                          * will need the custom_divisor setting.
 873                          */
 874
 875                         break;
 876
 877                 default:
 878                         break;
 879         }
 880
 881         return -ENOIOCTLCMD;
 882 }
 883
 884
 885 static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios)
 886 {
 887         dbg("%s -port %d", __FUNCTION__, port->number);
 888
 889         if ((!port->tty) || (!port->tty->termios)) {
 890                 dbg("%s - no tty structures", __FUNCTION__);
 891                 goto exit;
 892         }
 893
 894         firm_setup_port(port);
 895
 896 exit:
 897         return;
 898 }
 899
 900
 901 static void whiteheat_break_ctl(struct usb_serial_port *port, int break_state) {
 902         firm_set_break(port, break_state);
 903 }
 904
 905
 906 static int whiteheat_chars_in_buffer(struct usb_serial_port *port)
 907 {
 908         struct whiteheat_private *info = usb_get_serial_port_data(port);
 909         struct list_head *tmp;
 910         struct whiteheat_urb_wrap *wrap;
 911         int chars = 0;
 912         unsigned long flags;
 913
 914         dbg("%s - port %d", __FUNCTION__, port->number);
 915
 916         spin_lock_irqsave(&info->lock, flags);
 917         list_for_each(tmp, &info->tx_urbs_submitted) {
 918                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 919                 chars += wrap->urb->transfer_buffer_length;
 920         }
 921         spin_unlock_irqrestore(&info->lock, flags);
 922
 923         dbg ("%s - returns %d", __FUNCTION__, chars);
 924         return chars;
 925 }
 926
 927
 928 static void whiteheat_throttle (struct usb_serial_port *port)
 929 {
 930         struct whiteheat_private *info = usb_get_serial_port_data(port);
 931         unsigned long flags;
 932
 933         dbg("%s - port %d", __FUNCTION__, port->number);
 934
 935         spin_lock_irqsave(&info->lock, flags);
 936         info->flags |= THROTTLED;
 937         spin_unlock_irqrestore(&info->lock, flags);
 938
 939         return;
 940 }
 941
 942
 943 static void whiteheat_unthrottle (struct usb_serial_port *port)
 944 {
 945         struct whiteheat_private *info = usb_get_serial_port_data(port);
 946         int actually_throttled;
 947         unsigned long flags;
 948
 949         dbg("%s - port %d", __FUNCTION__, port->number);
 950
 951         spin_lock_irqsave(&info->lock, flags);
 952         actually_throttled = info->flags & ACTUALLY_THROTTLED;
 953         info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
 954         spin_unlock_irqrestore(&info->lock, flags);
 955
 956         if (actually_throttled)
 957                 rx_data_softint(&info->rx_work);
 958
 959         return;
 960 }
 961
 962
 963 /*****************************************************************************
 964  * Connect Tech's White Heat callback routines
 965  *****************************************************************************/
 966 static void command_port_write_callback(struct urb *urb)
 967 {
 968         int status = urb->status;
 969
 970         dbg("%s", __FUNCTION__);
 971
 972         if (status) {
 973                 dbg("nonzero urb status: %d", status);
 974                 return;
 975         }
 976 }
 977
 978
 979 static void command_port_read_callback(struct urb *urb)
 980 {
 981         struct usb_serial_port *command_port = (struct usb_serial_port *)urb->context;
 982         struct whiteheat_command_private *command_info;
 983         int status = urb->status;
 984         unsigned char *data = urb->transfer_buffer;
 985         int result;
 986
 987         dbg("%s", __FUNCTION__);
 988
 989         command_info = usb_get_serial_port_data(command_port);
 990         if (!command_info) {
 991                 dbg ("%s - command_info is NULL, exiting.", __FUNCTION__);
 992                 return;
 993         }
 994         if (status) {
 995                 dbg("%s - nonzero urb status: %d", __FUNCTION__, status);
 996                 if (status != -ENOENT)
 997                         command_info->command_finished = WHITEHEAT_CMD_FAILURE;
 998                 wake_up(&command_info->wait_command);
 999                 return;
1000         }
1001
1002         usb_serial_debug_data(debug, &command_port->dev, __FUNCTION__, urb->actual_length, data);
1003
1004         if (data[0] == WHITEHEAT_CMD_COMPLETE) {
1005                 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
1006                 wake_up(&command_info->wait_command);
1007         } else if (data[0] == WHITEHEAT_CMD_FAILURE) {
1008                 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
1009                 wake_up(&command_info->wait_command);
1010         } else if (data[0] == WHITEHEAT_EVENT) {
1011                 /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */
1012                 dbg("%s - event received", __FUNCTION__);
1013         } else if (data[0] == WHITEHEAT_GET_DTR_RTS) {
1014                 memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1);
1015                 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
1016                 wake_up(&command_info->wait_command);
1017         } else {
1018                 dbg("%s - bad reply from firmware", __FUNCTION__);
1019         }
1020
1021         /* Continue trying to always read */
1022         command_port->read_urb->dev = command_port->serial->dev;
1023         result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
1024         if (result)
1025                 dbg("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
1026 }
1027
1028
1029 static void whiteheat_read_callback(struct urb *urb)
1030 {
1031         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
1032         struct whiteheat_urb_wrap *wrap;
1033         unsigned char *data = urb->transfer_buffer;
1034         struct whiteheat_private *info = usb_get_serial_port_data(port);
1035         int status = urb->status;
1036
1037         dbg("%s - port %d", __FUNCTION__, port->number);
1038
1039         spin_lock(&info->lock);
1040         wrap = urb_to_wrap(urb, &info->rx_urbs_submitted);
1041         if (!wrap) {
1042                 spin_unlock(&info->lock);
1043                 err("%s - Not my urb!", __FUNCTION__);
1044                 return;
1045         }
1046         list_del(&wrap->list);
1047         spin_unlock(&info->lock);
1048
1049         if (status) {
1050                 dbg("%s - nonzero read bulk status received: %d",
1051                     __FUNCTION__, status);
1052                 spin_lock(&info->lock);
1053                 list_add(&wrap->list, &info->rx_urbs_free);
1054                 spin_unlock(&info->lock);
1055                 return;
1056         }
1057
1058         usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
1059
1060         spin_lock(&info->lock);
1061         list_add_tail(&wrap->list, &info->rx_urb_q);
1062         if (info->flags & THROTTLED) {
1063                 info->flags |= ACTUALLY_THROTTLED;
1064                 spin_unlock(&info->lock);
1065                 return;
1066         }
1067         spin_unlock(&info->lock);
1068
1069         schedule_work(&info->rx_work);
1070 }
1071
1072
1073 static void whiteheat_write_callback(struct urb *urb)
1074 {
1075         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
1076         struct whiteheat_private *info = usb_get_serial_port_data(port);
1077         struct whiteheat_urb_wrap *wrap;
1078         int status = urb->status;
1079
1080         dbg("%s - port %d", __FUNCTION__, port->number);
1081
1082         spin_lock(&info->lock);
1083         wrap = urb_to_wrap(urb, &info->tx_urbs_submitted);
1084         if (!wrap) {
1085                 spin_unlock(&info->lock);
1086                 err("%s - Not my urb!", __FUNCTION__);
1087                 return;
1088         }
1089         list_move(&wrap->list, &info->tx_urbs_free);
1090         spin_unlock(&info->lock);
1091
1092         if (status) {
1093                 dbg("%s - nonzero write bulk status received: %d",
1094                     __FUNCTION__, status);
1095                 return;
1096         }
1097
1098         usb_serial_port_softint(port);
1099 }
1100
1101
1102 /*****************************************************************************
1103  * Connect Tech's White Heat firmware interface
1104  *****************************************************************************/
1105 static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize)
1106 {
1107         struct usb_serial_port *command_port;
1108         struct whiteheat_command_private *command_info;
1109         struct whiteheat_private *info;
1110         __u8 *transfer_buffer;
1111         int retval = 0;
1112         int t;
1113
1114         dbg("%s - command %d", __FUNCTION__, command);
1115
1116         command_port = port->serial->port[COMMAND_PORT];
1117         command_info = usb_get_serial_port_data(command_port);
1118         mutex_lock(&command_info->mutex);
1119         command_info->command_finished = false;
1120
1121         transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
1122         transfer_buffer[0] = command;
1123         memcpy (&transfer_buffer[1], data, datasize);
1124         command_port->write_urb->transfer_buffer_length = datasize + 1;
1125         command_port->write_urb->dev = port->serial->dev;
1126         retval = usb_submit_urb (command_port->write_urb, GFP_NOIO);
1127         if (retval) {
1128                 dbg("%s - submit urb failed", __FUNCTION__);
1129                 goto exit;
1130         }
1131
1132         /* wait for the command to complete */
1133         t = wait_event_timeout(command_info->wait_command,
1134                 (bool)command_info->command_finished, COMMAND_TIMEOUT);
1135         if (!t)
1136                 usb_kill_urb(command_port->write_urb);
1137
1138         if (command_info->command_finished == false) {
1139                 dbg("%s - command timed out.", __FUNCTION__);
1140                 retval = -ETIMEDOUT;
1141                 goto exit;
1142         }
1143
1144         if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) {
1145                 dbg("%s - command failed.", __FUNCTION__);
1146                 retval = -EIO;
1147                 goto exit;
1148         }
1149
1150         if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
1151                 dbg("%s - command completed.", __FUNCTION__);
1152                 switch (command) {
1153                         case WHITEHEAT_GET_DTR_RTS:
1154                                 info = usb_get_serial_port_data(port);
1155                                 memcpy(&info->mcr, command_info->result_buffer, sizeof(struct whiteheat_dr_info));
1156                                 break;
1157                 }
1158         }
1159
1160 exit:
1161         mutex_unlock(&command_info->mutex);
1162         return retval;
1163 }
1164
1165
1166 static int firm_open(struct usb_serial_port *port) {
1167         struct whiteheat_simple open_command;
1168
1169         open_command.port = port->number - port->serial->minor + 1;
1170         return firm_send_command(port, WHITEHEAT_OPEN, (__u8 *)&open_command, sizeof(open_command));
1171 }
1172
1173
1174 static int firm_close(struct usb_serial_port *port) {
1175         struct whiteheat_simple close_command;
1176
1177         close_command.port = port->number - port->serial->minor + 1;
1178         return firm_send_command(port, WHITEHEAT_CLOSE, (__u8 *)&close_command, sizeof(close_command));
1179 }
1180
1181
1182 static int firm_setup_port(struct usb_serial_port *port) {
1183         struct whiteheat_port_settings port_settings;
1184         unsigned int cflag = port->tty->termios->c_cflag;
1185
1186         port_settings.port = port->number + 1;
1187
1188         /* get the byte size */
1189         switch (cflag & CSIZE) {
1190                 case CS5:       port_settings.bits = 5;   break;
1191                 case CS6:       port_settings.bits = 6;   break;
1192                 case CS7:       port_settings.bits = 7;   break;
1193                 default:
1194                 case CS8:       port_settings.bits = 8;   break;
1195         }
1196         dbg("%s - data bits = %d", __FUNCTION__, port_settings.bits);
1197
1198         /* determine the parity */
1199         if (cflag & PARENB)
1200                 if (cflag & CMSPAR)
1201                         if (cflag & PARODD)
1202                                 port_settings.parity = WHITEHEAT_PAR_MARK;
1203                         else
1204                                 port_settings.parity = WHITEHEAT_PAR_SPACE;
1205                 else
1206                         if (cflag & PARODD)
1207                                 port_settings.parity = WHITEHEAT_PAR_ODD;
1208                         else
1209                                 port_settings.parity = WHITEHEAT_PAR_EVEN;
1210         else
1211                 port_settings.parity = WHITEHEAT_PAR_NONE;
1212         dbg("%s - parity = %c", __FUNCTION__, port_settings.parity);
1213
1214         /* figure out the stop bits requested */
1215         if (cflag & CSTOPB)
1216                 port_settings.stop = 2;
1217         else
1218                 port_settings.stop = 1;
1219         dbg("%s - stop bits = %d", __FUNCTION__, port_settings.stop);
1220
1221         /* figure out the flow control settings */
1222         if (cflag & CRTSCTS)
1223                 port_settings.hflow = (WHITEHEAT_HFLOW_CTS | WHITEHEAT_HFLOW_RTS);
1224         else
1225                 port_settings.hflow = WHITEHEAT_HFLOW_NONE;
1226         dbg("%s - hardware flow control = %s %s %s %s", __FUNCTION__,
1227             (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "",
1228             (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
1229             (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
1230             (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
1231
1232         /* determine software flow control */
1233         if (I_IXOFF(port->tty))
1234                 port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
1235         else
1236                 port_settings.sflow = WHITEHEAT_SFLOW_NONE;
1237         dbg("%s - software flow control = %c", __FUNCTION__, port_settings.sflow);
1238
1239         port_settings.xon = START_CHAR(port->tty);
1240         port_settings.xoff = STOP_CHAR(port->tty);
1241         dbg("%s - XON = %2x, XOFF = %2x", __FUNCTION__, port_settings.xon, port_settings.xoff);
1242
1243         /* get the baud rate wanted */
1244         port_settings.baud = tty_get_baud_rate(port->tty);
1245         dbg("%s - baud rate = %d", __FUNCTION__, port_settings.baud);
1246
1247         /* handle any settings that aren't specified in the tty structure */
1248         port_settings.lloop = 0;
1249
1250         /* now send the message to the device */
1251         return firm_send_command(port, WHITEHEAT_SETUP_PORT, (__u8 *)&port_settings, sizeof(port_settings));
1252 }
1253
1254
1255 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) {
1256         struct whiteheat_set_rdb rts_command;
1257
1258         rts_command.port = port->number - port->serial->minor + 1;
1259         rts_command.state = onoff;
1260         return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&rts_command, sizeof(rts_command));
1261 }
1262
1263
1264 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) {
1265         struct whiteheat_set_rdb dtr_command;
1266
1267         dtr_command.port = port->number - port->serial->minor + 1;
1268         dtr_command.state = onoff;
1269         return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&dtr_command, sizeof(dtr_command));
1270 }
1271
1272
1273 static int firm_set_break(struct usb_serial_port *port, __u8 onoff) {
1274         struct whiteheat_set_rdb break_command;
1275
1276         break_command.port = port->number - port->serial->minor + 1;
1277         break_command.state = onoff;
1278         return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&break_command, sizeof(break_command));
1279 }
1280
1281
1282 static int firm_purge(struct usb_serial_port *port, __u8 rxtx) {
1283         struct whiteheat_purge purge_command;
1284
1285         purge_command.port = port->number - port->serial->minor + 1;
1286         purge_command.what = rxtx;
1287         return firm_send_command(port, WHITEHEAT_PURGE, (__u8 *)&purge_command, sizeof(purge_command));
1288 }
1289
1290
1291 static int firm_get_dtr_rts(struct usb_serial_port *port) {
1292         struct whiteheat_simple get_dr_command;
1293
1294         get_dr_command.port = port->number - port->serial->minor + 1;
1295         return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, (__u8 *)&get_dr_command, sizeof(get_dr_command));
1296 }
1297
1298
1299 static int firm_report_tx_done(struct usb_serial_port *port) {
1300         struct whiteheat_simple close_command;
1301
1302         close_command.port = port->number - port->serial->minor + 1;
1303         return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, (__u8 *)&close_command, sizeof(close_command));
1304 }
1305
1306
1307 /*****************************************************************************
1308  * Connect Tech's White Heat utility functions
1309  *****************************************************************************/
1310 static int start_command_port(struct usb_serial *serial)
1311 {
1312         struct usb_serial_port *command_port;
1313         struct whiteheat_command_private *command_info;
1314         int retval = 0;
1315
1316         command_port = serial->port[COMMAND_PORT];
1317         command_info = usb_get_serial_port_data(command_port);
1318         mutex_lock(&command_info->mutex);
1319         if (!command_info->port_running) {
1320                 /* Work around HCD bugs */
1321                 usb_clear_halt(serial->dev, command_port->read_urb->pipe);
1322
1323                 command_port->read_urb->dev = serial->dev;
1324                 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
1325                 if (retval) {
1326                         err("%s - failed submitting read urb, error %d", __FUNCTION__, retval);
1327                         goto exit;
1328                 }
1329         }
1330         command_info->port_running++;
1331
1332 exit:
1333         mutex_unlock(&command_info->mutex);
1334         return retval;
1335 }
1336
1337
1338 static void stop_command_port(struct usb_serial *serial)
1339 {
1340         struct usb_serial_port *command_port;
1341         struct whiteheat_command_private *command_info;
1342
1343         command_port = serial->port[COMMAND_PORT];
1344         command_info = usb_get_serial_port_data(command_port);
1345         mutex_lock(&command_info->mutex);
1346         command_info->port_running--;
1347         if (!command_info->port_running)
1348                 usb_kill_urb(command_port->read_urb);
1349         mutex_unlock(&command_info->mutex);
1350 }
1351
1352
1353 static int start_port_read(struct usb_serial_port *port)
1354 {
1355         struct whiteheat_private *info = usb_get_serial_port_data(port);
1356         struct whiteheat_urb_wrap *wrap;
1357         struct urb *urb;
1358         int retval = 0;
1359         unsigned long flags;
1360         struct list_head *tmp;
1361         struct list_head *tmp2;
1362
1363         spin_lock_irqsave(&info->lock, flags);
1364
1365         list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
1366                 list_del(tmp);
1367                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1368                 urb = wrap->urb;
1369                 urb->dev = port->serial->dev;
1370                 spin_unlock_irqrestore(&info->lock, flags);
1371                 retval = usb_submit_urb(urb, GFP_KERNEL);
1372                 if (retval) {
1373                         spin_lock_irqsave(&info->lock, flags);
1374                         list_add(tmp, &info->rx_urbs_free);
1375                         list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
1376                                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1377                                 urb = wrap->urb;
1378                                 list_del(tmp);
1379                                 spin_unlock_irqrestore(&info->lock, flags);
1380                                 usb_kill_urb(urb);
1381                                 spin_lock_irqsave(&info->lock, flags);
1382                                 list_add(tmp, &info->rx_urbs_free);
1383                         }
1384                         break;
1385                 }
1386                 spin_lock_irqsave(&info->lock, flags);
1387                 list_add(tmp, &info->rx_urbs_submitted);
1388         }
1389
1390         spin_unlock_irqrestore(&info->lock, flags);
1391
1392         return retval;
1393 }
1394
1395
1396 static struct whiteheat_urb_wrap *urb_to_wrap(struct urb* urb, struct list_head *head)
1397 {
1398         struct whiteheat_urb_wrap *wrap;
1399         struct list_head *tmp;
1400
1401         list_for_each(tmp, head) {
1402                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1403                 if (wrap->urb == urb)
1404                         return wrap;
1405         }
1406
1407         return NULL;
1408 }
1409
1410
1411 static struct list_head *list_first(struct list_head *head)
1412 {
1413         return head->next;
1414 }
1415
1416
1417 static void rx_data_softint(struct work_struct *work)
1418 {
1419         struct whiteheat_private *info =
1420                 container_of(work, struct whiteheat_private, rx_work);
1421         struct usb_serial_port *port = info->port;
1422         struct tty_struct *tty = port->tty;
1423         struct whiteheat_urb_wrap *wrap;
1424         struct urb *urb;
1425         unsigned long flags;
1426         struct list_head *tmp;
1427         struct list_head *tmp2;
1428         int result;
1429         int sent = 0;
1430
1431         spin_lock_irqsave(&info->lock, flags);
1432         if (info->flags & THROTTLED) {
1433                 spin_unlock_irqrestore(&info->lock, flags);
1434                 return;
1435         }
1436
1437         list_for_each_safe(tmp, tmp2, &info->rx_urb_q) {
1438                 list_del(tmp);
1439                 spin_unlock_irqrestore(&info->lock, flags);
1440
1441                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1442                 urb = wrap->urb;
1443
1444                 if (tty && urb->actual_length) {
1445                         int len = tty_buffer_request_room(tty, urb->actual_length);
1446                         /* This stuff can go away now I suspect */
1447                         if (unlikely(len < urb->actual_length)) {
1448                                 spin_lock_irqsave(&info->lock, flags);
1449                                 list_add(tmp, &info->rx_urb_q);
1450                                 spin_unlock_irqrestore(&info->lock, flags);
1451                                 tty_flip_buffer_push(tty);
1452                                 schedule_work(&info->rx_work);
1453                                 return;
1454                         }
1455                         tty_insert_flip_string(tty, urb->transfer_buffer, len);
1456                         sent += len;
1457                 }
1458
1459                 urb->dev = port->serial->dev;
1460                 result = usb_submit_urb(urb, GFP_ATOMIC);
1461                 if (result) {
1462                         err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
1463                         spin_lock_irqsave(&info->lock, flags);
1464                         list_add(tmp, &info->rx_urbs_free);
1465                         continue;
1466                 }
1467
1468                 spin_lock_irqsave(&info->lock, flags);
1469                 list_add(tmp, &info->rx_urbs_submitted);
1470         }
1471         spin_unlock_irqrestore(&info->lock, flags);
1472
1473         if (sent)
1474                 tty_flip_buffer_push(tty);
1475 }
1476
1477
1478 /*****************************************************************************
1479  * Connect Tech's White Heat module functions
1480  *****************************************************************************/
1481 static int __init whiteheat_init (void)
1482 {
1483         int retval;
1484         retval = usb_serial_register(&whiteheat_fake_device);
1485         if (retval)
1486                 goto failed_fake_register;
1487         retval = usb_serial_register(&whiteheat_device);
1488         if (retval)
1489                 goto failed_device_register;
1490         retval = usb_register(&whiteheat_driver);
1491         if (retval)
1492                 goto failed_usb_register;
1493         info(DRIVER_DESC " " DRIVER_VERSION);
1494         return 0;
1495 failed_usb_register:
1496         usb_serial_deregister(&whiteheat_device);
1497 failed_device_register:
1498         usb_serial_deregister(&whiteheat_fake_device);
1499 failed_fake_register:
1500         return retval;
1501 }
1502
1503
1504 static void __exit whiteheat_exit (void)
1505 {
1506         usb_deregister (&whiteheat_driver);
1507         usb_serial_deregister (&whiteheat_fake_device);
1508         usb_serial_deregister (&whiteheat_device);
1509 }
1510
1511
1512 module_init(whiteheat_init);
1513 module_exit(whiteheat_exit);
1514
1515 MODULE_AUTHOR( DRIVER_AUTHOR );
1516 MODULE_DESCRIPTION( DRIVER_DESC );
1517 MODULE_LICENSE("GPL");
1518
1519 module_param(urb_pool_size, int, 0);
1520 MODULE_PARM_DESC(urb_pool_size, "Number of urbs to use for buffering");
1521
1522 module_param(debug, bool, S_IRUGO | S_IWUSR);
1523 MODULE_PARM_DESC(debug, "Debug enabled or not");