err.no Git - linux-2.6/blob - drivers/usb/serial/whiteheat.c

   1 /*
   2  * USB ConnectTech WhiteHEAT driver
   3  *
   4  *      Copyright (C) 2002
   5  *          Connect Tech Inc.
   6  *
   7  *      Copyright (C) 1999 - 2001
   8  *          Greg Kroah-Hartman (greg@kroah.com)
   9  *
  10  *      This program is free software; you can redistribute it and/or modify
  11  *      it under the terms of the GNU General Public License as published by
  12  *      the Free Software Foundation; either version 2 of the License, or
  13  *      (at your option) any later version.
  14  *
  15  * See Documentation/usb/usb-serial.txt for more information on using this driver
  16  *
  17  * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com)
  18  *      Upgrade to full working driver
  19  *
  20  * (05/30/2001) gkh
  21  *      switched from using spinlock to a semaphore, which fixes lots of problems.
  22  *
  23  * (04/08/2001) gb
  24  *      Identify version on module load.
  25  *
  26  * 2001_Mar_19 gkh
  27  *      Fixed MOD_INC and MOD_DEC logic, the ability to open a port more
  28  *      than once, and the got the proper usb_device_id table entries so
  29  *      the driver works again.
  30  *
  31  * (11/01/2000) Adam J. Richter
  32  *      usb_device_id table support
  33  *
  34  * (10/05/2000) gkh
  35  *      Fixed bug with urb->dev not being set properly, now that the usb
  36  *      core needs it.
  37  *
  38  * (10/03/2000) smd
  39  *      firmware is improved to guard against crap sent to device
  40  *      firmware now replies CMD_FAILURE on bad things
  41  *      read_callback fix you provided for private info struct
  42  *      command_finished now indicates success or fail
  43  *      setup_port struct now packed to avoid gcc padding
  44  *      firmware uses 1 based port numbering, driver now handles that
  45  *
  46  * (09/11/2000) gkh
  47  *      Removed DEBUG #ifdefs with call to usb_serial_debug_data
  48  *
  49  * (07/19/2000) gkh
  50  *      Added module_init and module_exit functions to handle the fact that this
  51  *      driver is a loadable module now.
  52  *      Fixed bug with port->minor that was found by Al Borchers
  53  *
  54  * (07/04/2000) gkh
  55  *      Added support for port settings. Baud rate can now be changed. Line signals
  56  *      are not transferred to and from the tty layer yet, but things seem to be
  57  *      working well now.
  58  *
  59  * (05/04/2000) gkh
  60  *      First cut at open and close commands. Data can flow through the ports at
  61  *      default speeds now.
  62  *
  63  * (03/26/2000) gkh
  64  *      Split driver up into device specific pieces.
  65  *
  66  */
  67
  68 #include <linux/kernel.h>
  69 #include <linux/errno.h>
  70 #include <linux/init.h>
  71 #include <linux/slab.h>
  72 #include <linux/tty.h>
  73 #include <linux/tty_driver.h>
  74 #include <linux/tty_flip.h>
  75 #include <linux/module.h>
  76 #include <linux/spinlock.h>
  77 #include <linux/mutex.h>
  78 #include <asm/uaccess.h>
  79 #include <asm/termbits.h>
  80 #include <linux/usb.h>
  81 #include <linux/serial_reg.h>
  82 #include <linux/serial.h>
  83 #include <linux/usb/serial.h>
  84 #include "whiteheat_fw.h"               /* firmware for the ConnectTech WhiteHEAT device */
  85 #include "whiteheat.h"                  /* WhiteHEAT specific commands */
  86
  87 static int debug;
  88
  89 #ifndef CMSPAR
  90 #define CMSPAR 0
  91 #endif
  92
  93 /*
  94  * Version Information
  95  */
  96 #define DRIVER_VERSION "v2.0"
  97 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>"
  98 #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
  99
 100 #define CONNECT_TECH_VENDOR_ID          0x0710
 101 #define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001
 102 #define CONNECT_TECH_WHITE_HEAT_ID      0x8001
 103
 104 /*
 105    ID tables for whiteheat are unusual, because we want to different
 106    things for different versions of the device.  Eventually, this
 107    will be doable from a single table.  But, for now, we define two
 108    separate ID tables, and then a third table that combines them
 109    just for the purpose of exporting the autoloading information.
 110 */
 111 static struct usb_device_id id_table_std [] = {
 112         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
 113         { }                                             /* Terminating entry */
 114 };
 115
 116 static struct usb_device_id id_table_prerenumeration [] = {
 117         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
 118         { }                                             /* Terminating entry */
 119 };
 120
 121 static struct usb_device_id id_table_combined [] = {
 122         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
 123         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
 124         { }                                             /* Terminating entry */
 125 };
 126
 127 MODULE_DEVICE_TABLE (usb, id_table_combined);
 128
 129 static struct usb_driver whiteheat_driver = {
 130         .name =         "whiteheat",
 131         .probe =        usb_serial_probe,
 132         .disconnect =   usb_serial_disconnect,
 133         .id_table =     id_table_combined,
 134         .no_dynamic_id =        1,
 135 };
 136
 137 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
 138 static int  whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id);
 139 static int  whiteheat_firmware_attach   (struct usb_serial *serial);
 140
 141 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
 142 static int  whiteheat_attach            (struct usb_serial *serial);
 143 static void whiteheat_shutdown          (struct usb_serial *serial);
 144 static int  whiteheat_open              (struct usb_serial_port *port, struct file *filp);
 145 static void whiteheat_close             (struct usb_serial_port *port, struct file *filp);
 146 static int  whiteheat_write             (struct usb_serial_port *port, const unsigned char *buf, int count);
 147 static int  whiteheat_write_room        (struct usb_serial_port *port);
 148 static int  whiteheat_ioctl             (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
 149 static void whiteheat_set_termios       (struct usb_serial_port *port, struct ktermios * old);
 150 static int  whiteheat_tiocmget          (struct usb_serial_port *port, struct file *file);
 151 static int  whiteheat_tiocmset          (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
 152 static void whiteheat_break_ctl         (struct usb_serial_port *port, int break_state);
 153 static int  whiteheat_chars_in_buffer   (struct usb_serial_port *port);
 154 static void whiteheat_throttle          (struct usb_serial_port *port);
 155 static void whiteheat_unthrottle        (struct usb_serial_port *port);
 156 static void whiteheat_read_callback     (struct urb *urb);
 157 static void whiteheat_write_callback    (struct urb *urb);
 158
 159 static struct usb_serial_driver whiteheat_fake_device = {
 160         .driver = {
 161                 .owner =        THIS_MODULE,
 162                 .name =         "whiteheatnofirm",
 163         },
 164         .description =          "Connect Tech - WhiteHEAT - (prerenumeration)",
 165         .usb_driver =           &whiteheat_driver,
 166         .id_table =             id_table_prerenumeration,
 167         .num_ports =            1,
 168         .probe =                whiteheat_firmware_download,
 169         .attach =               whiteheat_firmware_attach,
 170 };
 171
 172 static struct usb_serial_driver whiteheat_device = {
 173         .driver = {
 174                 .owner =        THIS_MODULE,
 175                 .name =         "whiteheat",
 176         },
 177         .description =          "Connect Tech - WhiteHEAT",
 178         .usb_driver =           &whiteheat_driver,
 179         .id_table =             id_table_std,
 180         .num_ports =            4,
 181         .attach =               whiteheat_attach,
 182         .shutdown =             whiteheat_shutdown,
 183         .open =                 whiteheat_open,
 184         .close =                whiteheat_close,
 185         .write =                whiteheat_write,
 186         .write_room =           whiteheat_write_room,
 187         .ioctl =                whiteheat_ioctl,
 188         .set_termios =          whiteheat_set_termios,
 189         .break_ctl =            whiteheat_break_ctl,
 190         .tiocmget =             whiteheat_tiocmget,
 191         .tiocmset =             whiteheat_tiocmset,
 192         .chars_in_buffer =      whiteheat_chars_in_buffer,
 193         .throttle =             whiteheat_throttle,
 194         .unthrottle =           whiteheat_unthrottle,
 195         .read_bulk_callback =   whiteheat_read_callback,
 196         .write_bulk_callback =  whiteheat_write_callback,
 197 };
 198
 199
 200 struct whiteheat_command_private {
 201         struct mutex            mutex;
 202         __u8                    port_running;
 203         __u8                    command_finished;
 204         wait_queue_head_t       wait_command;   /* for handling sleeping while waiting for a command to finish */
 205         __u8                    result_buffer[64];
 206 };
 207
 208
 209 #define THROTTLED               0x01
 210 #define ACTUALLY_THROTTLED      0x02
 211
 212 static int urb_pool_size = 8;
 213
 214 struct whiteheat_urb_wrap {
 215         struct list_head        list;
 216         struct urb              *urb;
 217 };
 218
 219 struct whiteheat_private {
 220         spinlock_t              lock;
 221         __u8                    flags;
 222         __u8                    mcr;            /* FIXME: no locking on mcr */
 223         struct list_head        rx_urbs_free;
 224         struct list_head        rx_urbs_submitted;
 225         struct list_head        rx_urb_q;
 226         struct work_struct      rx_work;
 227         struct usb_serial_port  *port;
 228         struct list_head        tx_urbs_free;
 229         struct list_head        tx_urbs_submitted;
 230         struct mutex            deathwarrant;
 231 };
 232
 233
 234 /* local function prototypes */
 235 static int start_command_port(struct usb_serial *serial);
 236 static void stop_command_port(struct usb_serial *serial);
 237 static void command_port_write_callback(struct urb *urb);
 238 static void command_port_read_callback(struct urb *urb);
 239
 240 static int start_port_read(struct usb_serial_port *port);
 241 static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, struct list_head *head);
 242 static struct list_head *list_first(struct list_head *head);
 243 static void rx_data_softint(struct work_struct *work);
 244
 245 static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize);
 246 static int firm_open(struct usb_serial_port *port);
 247 static int firm_close(struct usb_serial_port *port);
 248 static int firm_setup_port(struct usb_serial_port *port);
 249 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
 250 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
 251 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
 252 static int firm_purge(struct usb_serial_port *port, __u8 rxtx);
 253 static int firm_get_dtr_rts(struct usb_serial_port *port);
 254 static int firm_report_tx_done(struct usb_serial_port *port);
 255
 256
 257 #define COMMAND_PORT            4
 258 #define COMMAND_TIMEOUT         (2*HZ)  /* 2 second timeout for a command */
 259 #define COMMAND_TIMEOUT_MS      2000
 260 #define CLOSING_DELAY           (30 * HZ)
 261
 262
 263 /*****************************************************************************
 264  * Connect Tech's White Heat prerenumeration driver functions
 265  *****************************************************************************/
 266
 267 /* steps to download the firmware to the WhiteHEAT device:
 268  - hold the reset (by writing to the reset bit of the CPUCS register)
 269  - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD
 270  - release the reset (by writing to the CPUCS register)
 271  - download the WH.HEX file for all addresses greater than 0x1b3f using
 272    VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD
 273  - hold the reset
 274  - download the WH.HEX file for all addresses less than 0x1b40 using
 275    VENDOR_REQUEST_ANCHOR_LOAD
 276  - release the reset
 277  - device renumerated itself and comes up as new device id with all
 278    firmware download completed.
 279 */
 280 static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id)
 281 {
 282         int response;
 283         const struct whiteheat_hex_record *record;
 284
 285         dbg("%s", __func__);
 286
 287         response = ezusb_set_reset (serial, 1);
 288
 289         record = &whiteheat_loader[0];
 290         while (record->address != 0xffff) {
 291                 response = ezusb_writememory (serial, record->address,
 292                                 (unsigned char *)record->data, record->data_size, 0xa0);
 293                 if (response < 0) {
 294                         err("%s - ezusb_writememory failed for loader (%d %04X %p %d)",
 295                                 __func__, response, record->address, record->data, record->data_size);
 296                         break;
 297                 }
 298                 ++record;
 299         }
 300
 301         response = ezusb_set_reset (serial, 0);
 302
 303         record = &whiteheat_firmware[0];
 304         while (record->address < 0x1b40) {
 305                 ++record;
 306         }
 307         while (record->address != 0xffff) {
 308                 response = ezusb_writememory (serial, record->address,
 309                                 (unsigned char *)record->data, record->data_size, 0xa3);
 310                 if (response < 0) {
 311                         err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)",
 312                                 __func__, response, record->address, record->data, record->data_size);
 313                         break;
 314                 }
 315                 ++record;
 316         }
 317
 318         response = ezusb_set_reset (serial, 1);
 319
 320         record = &whiteheat_firmware[0];
 321         while (record->address < 0x1b40) {
 322                 response = ezusb_writememory (serial, record->address,
 323                                 (unsigned char *)record->data, record->data_size, 0xa0);
 324                 if (response < 0) {
 325                         err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)",
 326                                 __func__, response, record->address, record->data, record->data_size);
 327                         break;
 328                 }
 329                 ++record;
 330         }
 331
 332         response = ezusb_set_reset (serial, 0);
 333
 334         return 0;
 335 }
 336
 337
 338 static int whiteheat_firmware_attach (struct usb_serial *serial)
 339 {
 340         /* We want this device to fail to have a driver assigned to it */
 341         return 1;
 342 }
 343
 344
 345 /*****************************************************************************
 346  * Connect Tech's White Heat serial driver functions
 347  *****************************************************************************/
 348 static int whiteheat_attach (struct usb_serial *serial)
 349 {
 350         struct usb_serial_port *command_port;
 351         struct whiteheat_command_private *command_info;
 352         struct usb_serial_port *port;
 353         struct whiteheat_private *info;
 354         struct whiteheat_hw_info *hw_info;
 355         int pipe;
 356         int ret;
 357         int alen;
 358         __u8 *command;
 359         __u8 *result;
 360         int i;
 361         int j;
 362         struct urb *urb;
 363         int buf_size;
 364         struct whiteheat_urb_wrap *wrap;
 365         struct list_head *tmp;
 366
 367         command_port = serial->port[COMMAND_PORT];
 368
 369         pipe = usb_sndbulkpipe (serial->dev, command_port->bulk_out_endpointAddress);
 370         command = kmalloc(2, GFP_KERNEL);
 371         if (!command)
 372                 goto no_command_buffer;
 373         command[0] = WHITEHEAT_GET_HW_INFO;
 374         command[1] = 0;
 375
 376         result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
 377         if (!result)
 378                 goto no_result_buffer;
 379         /*
 380          * When the module is reloaded the firmware is still there and
 381          * the endpoints are still in the usb core unchanged. This is the
 382          * unlinking bug in disguise. Same for the call below.
 383          */
 384         usb_clear_halt(serial->dev, pipe);
 385         ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS);
 386         if (ret) {
 387                 err("%s: Couldn't send command [%d]", serial->type->description, ret);
 388                 goto no_firmware;
 389         } else if (alen != 2) {
 390                 err("%s: Send command incomplete [%d]", serial->type->description, alen);
 391                 goto no_firmware;
 392         }
 393
 394         pipe = usb_rcvbulkpipe (serial->dev, command_port->bulk_in_endpointAddress);
 395         /* See the comment on the usb_clear_halt() above */
 396         usb_clear_halt(serial->dev, pipe);
 397         ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
 398         if (ret) {
 399                 err("%s: Couldn't get results [%d]", serial->type->description, ret);
 400                 goto no_firmware;
 401         } else if (alen != sizeof(*hw_info) + 1) {
 402                 err("%s: Get results incomplete [%d]", serial->type->description, alen);
 403                 goto no_firmware;
 404         } else if (result[0] != command[0]) {
 405                 err("%s: Command failed [%d]", serial->type->description, result[0]);
 406                 goto no_firmware;
 407         }
 408
 409         hw_info = (struct whiteheat_hw_info *)&result[1];
 410
 411         info("%s: Driver %s: Firmware v%d.%02d", serial->type->description,
 412              DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev);
 413
 414         for (i = 0; i < serial->num_ports; i++) {
 415                 port = serial->port[i];
 416
 417                 info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
 418                 if (info == NULL) {
 419                         err("%s: Out of memory for port structures\n", serial->type->description);
 420                         goto no_private;
 421                 }
 422
 423                 spin_lock_init(&info->lock);
 424                 mutex_init(&info->deathwarrant);
 425                 info->flags = 0;
 426                 info->mcr = 0;
 427                 INIT_WORK(&info->rx_work, rx_data_softint);
 428                 info->port = port;
 429
 430                 INIT_LIST_HEAD(&info->rx_urbs_free);
 431                 INIT_LIST_HEAD(&info->rx_urbs_submitted);
 432                 INIT_LIST_HEAD(&info->rx_urb_q);
 433                 INIT_LIST_HEAD(&info->tx_urbs_free);
 434                 INIT_LIST_HEAD(&info->tx_urbs_submitted);
 435
 436                 for (j = 0; j < urb_pool_size; j++) {
 437                         urb = usb_alloc_urb(0, GFP_KERNEL);
 438                         if (!urb) {
 439                                 err("No free urbs available");
 440                                 goto no_rx_urb;
 441                         }
 442                         buf_size = port->read_urb->transfer_buffer_length;
 443                         urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
 444                         if (!urb->transfer_buffer) {
 445                                 err("Couldn't allocate urb buffer");
 446                                 goto no_rx_buf;
 447                         }
 448                         wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
 449                         if (!wrap) {
 450                                 err("Couldn't allocate urb wrapper");
 451                                 goto no_rx_wrap;
 452                         }
 453                         usb_fill_bulk_urb(urb, serial->dev,
 454                                         usb_rcvbulkpipe(serial->dev,
 455                                                 port->bulk_in_endpointAddress),
 456                                         urb->transfer_buffer, buf_size,
 457                                         whiteheat_read_callback, port);
 458                         wrap->urb = urb;
 459                         list_add(&wrap->list, &info->rx_urbs_free);
 460
 461                         urb = usb_alloc_urb(0, GFP_KERNEL);
 462                         if (!urb) {
 463                                 err("No free urbs available");
 464                                 goto no_tx_urb;
 465                         }
 466                         buf_size = port->write_urb->transfer_buffer_length;
 467                         urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
 468                         if (!urb->transfer_buffer) {
 469                                 err("Couldn't allocate urb buffer");
 470                                 goto no_tx_buf;
 471                         }
 472                         wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
 473                         if (!wrap) {
 474                                 err("Couldn't allocate urb wrapper");
 475                                 goto no_tx_wrap;
 476                         }
 477                         usb_fill_bulk_urb(urb, serial->dev,
 478                                         usb_sndbulkpipe(serial->dev,
 479                                                 port->bulk_out_endpointAddress),
 480                                         urb->transfer_buffer, buf_size,
 481                                         whiteheat_write_callback, port);
 482                         wrap->urb = urb;
 483                         list_add(&wrap->list, &info->tx_urbs_free);
 484                 }
 485
 486                 usb_set_serial_port_data(port, info);
 487         }
 488
 489         command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL);
 490         if (command_info == NULL) {
 491                 err("%s: Out of memory for port structures\n", serial->type->description);
 492                 goto no_command_private;
 493         }
 494
 495         mutex_init(&command_info->mutex);
 496         command_info->port_running = 0;
 497         init_waitqueue_head(&command_info->wait_command);
 498         usb_set_serial_port_data(command_port, command_info);
 499         command_port->write_urb->complete = command_port_write_callback;
 500         command_port->read_urb->complete = command_port_read_callback;
 501         kfree(result);
 502         kfree(command);
 503
 504         return 0;
 505
 506 no_firmware:
 507         /* Firmware likely not running */
 508         err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description);
 509         err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description);
 510         err("%s: please contact support@connecttech.com\n", serial->type->description);
 511         kfree(result);
 512         return -ENODEV;
 513
 514 no_command_private:
 515         for (i = serial->num_ports - 1; i >= 0; i--) {
 516                 port = serial->port[i];
 517                 info = usb_get_serial_port_data(port);
 518                 for (j = urb_pool_size - 1; j >= 0; j--) {
 519                         tmp = list_first(&info->tx_urbs_free);
 520                         list_del(tmp);
 521                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 522                         urb = wrap->urb;
 523                         kfree(wrap);
 524 no_tx_wrap:
 525                         kfree(urb->transfer_buffer);
 526 no_tx_buf:
 527                         usb_free_urb(urb);
 528 no_tx_urb:
 529                         tmp = list_first(&info->rx_urbs_free);
 530                         list_del(tmp);
 531                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 532                         urb = wrap->urb;
 533                         kfree(wrap);
 534 no_rx_wrap:
 535                         kfree(urb->transfer_buffer);
 536 no_rx_buf:
 537                         usb_free_urb(urb);
 538 no_rx_urb:
 539                         ;
 540                 }
 541                 kfree(info);
 542 no_private:
 543                 ;
 544         }
 545         kfree(result);
 546 no_result_buffer:
 547         kfree(command);
 548 no_command_buffer:
 549         return -ENOMEM;
 550 }
 551
 552
 553 static void whiteheat_shutdown (struct usb_serial *serial)
 554 {
 555         struct usb_serial_port *command_port;
 556         struct usb_serial_port *port;
 557         struct whiteheat_private *info;
 558         struct whiteheat_urb_wrap *wrap;
 559         struct urb *urb;
 560         struct list_head *tmp;
 561         struct list_head *tmp2;
 562         int i;
 563
 564         dbg("%s", __func__);
 565
 566         /* free up our private data for our command port */
 567         command_port = serial->port[COMMAND_PORT];
 568         kfree (usb_get_serial_port_data(command_port));
 569
 570         for (i = 0; i < serial->num_ports; i++) {
 571                 port = serial->port[i];
 572                 info = usb_get_serial_port_data(port);
 573                 list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
 574                         list_del(tmp);
 575                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 576                         urb = wrap->urb;
 577                         kfree(wrap);
 578                         kfree(urb->transfer_buffer);
 579                         usb_free_urb(urb);
 580                 }
 581                 list_for_each_safe(tmp, tmp2, &info->tx_urbs_free) {
 582                         list_del(tmp);
 583                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 584                         urb = wrap->urb;
 585                         kfree(wrap);
 586                         kfree(urb->transfer_buffer);
 587                         usb_free_urb(urb);
 588                 }
 589                 kfree(info);
 590         }
 591
 592         return;
 593 }
 594
 595
 596 static int whiteheat_open (struct usb_serial_port *port, struct file *filp)
 597 {
 598         int             retval = 0;
 599         struct ktermios old_term;
 600
 601         dbg("%s - port %d", __func__, port->number);
 602
 603         retval = start_command_port(port->serial);
 604         if (retval)
 605                 goto exit;
 606
 607         port->tty->low_latency = 1;
 608
 609         /* send an open port command */
 610         retval = firm_open(port);
 611         if (retval) {
 612                 stop_command_port(port->serial);
 613                 goto exit;
 614         }
 615
 616         retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX);
 617         if (retval) {
 618                 firm_close(port);
 619                 stop_command_port(port->serial);
 620                 goto exit;
 621         }
 622
 623         old_term.c_cflag = ~port->tty->termios->c_cflag;
 624         old_term.c_iflag = ~port->tty->termios->c_iflag;
 625         whiteheat_set_termios(port, &old_term);
 626
 627         /* Work around HCD bugs */
 628         usb_clear_halt(port->serial->dev, port->read_urb->pipe);
 629         usb_clear_halt(port->serial->dev, port->write_urb->pipe);
 630
 631         /* Start reading from the device */
 632         retval = start_port_read(port);
 633         if (retval) {
 634                 err("%s - failed submitting read urb, error %d", __func__, retval);
 635                 firm_close(port);
 636                 stop_command_port(port->serial);
 637                 goto exit;
 638         }
 639
 640 exit:
 641         dbg("%s - exit, retval = %d", __func__, retval);
 642         return retval;
 643 }
 644
 645
 646 static void whiteheat_close(struct usb_serial_port *port, struct file * filp)
 647 {
 648         struct whiteheat_private *info = usb_get_serial_port_data(port);
 649         struct whiteheat_urb_wrap *wrap;
 650         struct urb *urb;
 651         struct list_head *tmp;
 652         struct list_head *tmp2;
 653
 654         dbg("%s - port %d", __func__, port->number);
 655
 656         mutex_lock(&port->serial->disc_mutex);
 657         /* filp is NULL when called from usb_serial_disconnect */
 658         if ((filp && (tty_hung_up_p(filp))) || port->serial->disconnected) {
 659                 mutex_unlock(&port->serial->disc_mutex);
 660                 return;
 661         }
 662         mutex_unlock(&port->serial->disc_mutex);
 663
 664         port->tty->closing = 1;
 665
 666 /*
 667  * Not currently in use; tty_wait_until_sent() calls
 668  * serial_chars_in_buffer() which deadlocks on the second semaphore
 669  * acquisition. This should be fixed at some point. Greg's been
 670  * notified.
 671         if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) {
 672                 tty_wait_until_sent(port->tty, CLOSING_DELAY);
 673         }
 674 */
 675
 676         if (port->tty->driver->flush_buffer)
 677                 port->tty->driver->flush_buffer(port->tty);
 678         tty_ldisc_flush(port->tty);
 679
 680         firm_report_tx_done(port);
 681
 682         firm_close(port);
 683
 684 printk(KERN_ERR"Before processing rx_urbs_submitted.\n");
 685         /* shutdown our bulk reads and writes */
 686         mutex_lock(&info->deathwarrant);
 687         spin_lock_irq(&info->lock);
 688         list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
 689                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 690                 urb = wrap->urb;
 691                 list_del(tmp);
 692                 spin_unlock_irq(&info->lock);
 693                 usb_kill_urb(urb);
 694                 spin_lock_irq(&info->lock);
 695                 list_add(tmp, &info->rx_urbs_free);
 696         }
 697         list_for_each_safe(tmp, tmp2, &info->rx_urb_q)
 698                 list_move(tmp, &info->rx_urbs_free);
 699         list_for_each_safe(tmp, tmp2, &info->tx_urbs_submitted) {
 700                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 701                 urb = wrap->urb;
 702                 list_del(tmp);
 703                 spin_unlock_irq(&info->lock);
 704                 usb_kill_urb(urb);
 705                 spin_lock_irq(&info->lock);
 706                 list_add(tmp, &info->tx_urbs_free);
 707         }
 708         spin_unlock_irq(&info->lock);
 709         mutex_unlock(&info->deathwarrant);
 710
 711         stop_command_port(port->serial);
 712
 713         port->tty->closing = 0;
 714 }
 715
 716
 717 static int whiteheat_write(struct usb_serial_port *port, const unsigned char *buf, int count)
 718 {
 719         struct usb_serial *serial = port->serial;
 720         struct whiteheat_private *info = usb_get_serial_port_data(port);
 721         struct whiteheat_urb_wrap *wrap;
 722         struct urb *urb;
 723         int result;
 724         int bytes;
 725         int sent = 0;
 726         unsigned long flags;
 727         struct list_head *tmp;
 728
 729         dbg("%s - port %d", __func__, port->number);
 730
 731         if (count == 0) {
 732                 dbg("%s - write request of 0 bytes", __func__);
 733                 return (0);
 734         }
 735
 736         while (count) {
 737                 spin_lock_irqsave(&info->lock, flags);
 738                 if (list_empty(&info->tx_urbs_free)) {
 739                         spin_unlock_irqrestore(&info->lock, flags);
 740                         break;
 741                 }
 742                 tmp = list_first(&info->tx_urbs_free);
 743                 list_del(tmp);
 744                 spin_unlock_irqrestore(&info->lock, flags);
 745
 746                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 747                 urb = wrap->urb;
 748                 bytes = (count > port->bulk_out_size) ? port->bulk_out_size : count;
 749                 memcpy (urb->transfer_buffer, buf + sent, bytes);
 750
 751                 usb_serial_debug_data(debug, &port->dev, __func__, bytes, urb->transfer_buffer);
 752
 753                 urb->dev = serial->dev;
 754                 urb->transfer_buffer_length = bytes;
 755                 result = usb_submit_urb(urb, GFP_ATOMIC);
 756                 if (result) {
 757                         err("%s - failed submitting write urb, error %d", __func__, result);
 758                         sent = result;
 759                         spin_lock_irqsave(&info->lock, flags);
 760                         list_add(tmp, &info->tx_urbs_free);
 761                         spin_unlock_irqrestore(&info->lock, flags);
 762                         break;
 763                 } else {
 764                         sent += bytes;
 765                         count -= bytes;
 766                         spin_lock_irqsave(&info->lock, flags);
 767                         list_add(tmp, &info->tx_urbs_submitted);
 768                         spin_unlock_irqrestore(&info->lock, flags);
 769                 }
 770         }
 771
 772         return sent;
 773 }
 774
 775
 776 static int whiteheat_write_room(struct usb_serial_port *port)
 777 {
 778         struct whiteheat_private *info = usb_get_serial_port_data(port);
 779         struct list_head *tmp;
 780         int room = 0;
 781         unsigned long flags;
 782
 783         dbg("%s - port %d", __func__, port->number);
 784
 785         spin_lock_irqsave(&info->lock, flags);
 786         list_for_each(tmp, &info->tx_urbs_free)
 787                 room++;
 788         spin_unlock_irqrestore(&info->lock, flags);
 789         room *= port->bulk_out_size;
 790
 791         dbg("%s - returns %d", __func__, room);
 792         return (room);
 793 }
 794
 795
 796 static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file)
 797 {
 798         struct whiteheat_private *info = usb_get_serial_port_data(port);
 799         unsigned int modem_signals = 0;
 800
 801         dbg("%s - port %d", __func__, port->number);
 802
 803         firm_get_dtr_rts(port);
 804         if (info->mcr & UART_MCR_DTR)
 805                 modem_signals |= TIOCM_DTR;
 806         if (info->mcr & UART_MCR_RTS)
 807                 modem_signals |= TIOCM_RTS;
 808
 809         return modem_signals;
 810 }
 811
 812
 813 static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file,
 814                                unsigned int set, unsigned int clear)
 815 {
 816         struct whiteheat_private *info = usb_get_serial_port_data(port);
 817
 818         dbg("%s - port %d", __func__, port->number);
 819
 820         if (set & TIOCM_RTS)
 821                 info->mcr |= UART_MCR_RTS;
 822         if (set & TIOCM_DTR)
 823                 info->mcr |= UART_MCR_DTR;
 824
 825         if (clear & TIOCM_RTS)
 826                 info->mcr &= ~UART_MCR_RTS;
 827         if (clear & TIOCM_DTR)
 828                 info->mcr &= ~UART_MCR_DTR;
 829
 830         firm_set_dtr(port, info->mcr & UART_MCR_DTR);
 831         firm_set_rts(port, info->mcr & UART_MCR_RTS);
 832         return 0;
 833 }
 834
 835
 836 static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
 837 {
 838         struct serial_struct serstruct;
 839         void __user *user_arg = (void __user *)arg;
 840
 841         dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
 842
 843         switch (cmd) {
 844                 case TIOCGSERIAL:
 845                         memset(&serstruct, 0, sizeof(serstruct));
 846                         serstruct.type = PORT_16654;
 847                         serstruct.line = port->serial->minor;
 848                         serstruct.port = port->number;
 849                         serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 850                         serstruct.xmit_fifo_size = port->bulk_out_size;
 851                         serstruct.custom_divisor = 0;
 852                         serstruct.baud_base = 460800;
 853                         serstruct.close_delay = CLOSING_DELAY;
 854                         serstruct.closing_wait = CLOSING_DELAY;
 855
 856                         if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
 857                                 return -EFAULT;
 858
 859                         break;
 860
 861                 case TIOCSSERIAL:
 862                         if (copy_from_user(&serstruct, user_arg, sizeof(serstruct)))
 863                                 return -EFAULT;
 864
 865                         /*
 866                          * For now this is ignored. dip sets the ASYNC_[V]HI flags
 867                          * but this isn't used by us at all. Maybe someone somewhere
 868                          * will need the custom_divisor setting.
 869                          */
 870
 871                         break;
 872
 873                 default:
 874                         break;
 875         }
 876
 877         return -ENOIOCTLCMD;
 878 }
 879
 880
 881 static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios)
 882 {
 883         dbg("%s -port %d", __func__, port->number);
 884         firm_setup_port(port);
 885 }
 886
 887
 888 static void whiteheat_break_ctl(struct usb_serial_port *port, int break_state) {
 889         firm_set_break(port, break_state);
 890 }
 891
 892
 893 static int whiteheat_chars_in_buffer(struct usb_serial_port *port)
 894 {
 895         struct whiteheat_private *info = usb_get_serial_port_data(port);
 896         struct list_head *tmp;
 897         struct whiteheat_urb_wrap *wrap;
 898         int chars = 0;
 899         unsigned long flags;
 900
 901         dbg("%s - port %d", __func__, port->number);
 902
 903         spin_lock_irqsave(&info->lock, flags);
 904         list_for_each(tmp, &info->tx_urbs_submitted) {
 905                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 906                 chars += wrap->urb->transfer_buffer_length;
 907         }
 908         spin_unlock_irqrestore(&info->lock, flags);
 909
 910         dbg ("%s - returns %d", __func__, chars);
 911         return chars;
 912 }
 913
 914
 915 static void whiteheat_throttle (struct usb_serial_port *port)
 916 {
 917         struct whiteheat_private *info = usb_get_serial_port_data(port);
 918         unsigned long flags;
 919
 920         dbg("%s - port %d", __func__, port->number);
 921
 922         spin_lock_irqsave(&info->lock, flags);
 923         info->flags |= THROTTLED;
 924         spin_unlock_irqrestore(&info->lock, flags);
 925
 926         return;
 927 }
 928
 929
 930 static void whiteheat_unthrottle (struct usb_serial_port *port)
 931 {
 932         struct whiteheat_private *info = usb_get_serial_port_data(port);
 933         int actually_throttled;
 934         unsigned long flags;
 935
 936         dbg("%s - port %d", __func__, port->number);
 937
 938         spin_lock_irqsave(&info->lock, flags);
 939         actually_throttled = info->flags & ACTUALLY_THROTTLED;
 940         info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
 941         spin_unlock_irqrestore(&info->lock, flags);
 942
 943         if (actually_throttled)
 944                 rx_data_softint(&info->rx_work);
 945
 946         return;
 947 }
 948
 949
 950 /*****************************************************************************
 951  * Connect Tech's White Heat callback routines
 952  *****************************************************************************/
 953 static void command_port_write_callback(struct urb *urb)
 954 {
 955         int status = urb->status;
 956
 957         dbg("%s", __func__);
 958
 959         if (status) {
 960                 dbg("nonzero urb status: %d", status);
 961                 return;
 962         }
 963 }
 964
 965
 966 static void command_port_read_callback(struct urb *urb)
 967 {
 968         struct usb_serial_port *command_port = urb->context;
 969         struct whiteheat_command_private *command_info;
 970         int status = urb->status;
 971         unsigned char *data = urb->transfer_buffer;
 972         int result;
 973
 974         dbg("%s", __func__);
 975
 976         command_info = usb_get_serial_port_data(command_port);
 977         if (!command_info) {
 978                 dbg ("%s - command_info is NULL, exiting.", __func__);
 979                 return;
 980         }
 981         if (status) {
 982                 dbg("%s - nonzero urb status: %d", __func__, status);
 983                 if (status != -ENOENT)
 984                         command_info->command_finished = WHITEHEAT_CMD_FAILURE;
 985                 wake_up(&command_info->wait_command);
 986                 return;
 987         }
 988
 989         usb_serial_debug_data(debug, &command_port->dev, __func__, urb->actual_length, data);
 990
 991         if (data[0] == WHITEHEAT_CMD_COMPLETE) {
 992                 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
 993                 wake_up(&command_info->wait_command);
 994         } else if (data[0] == WHITEHEAT_CMD_FAILURE) {
 995                 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
 996                 wake_up(&command_info->wait_command);
 997         } else if (data[0] == WHITEHEAT_EVENT) {
 998                 /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */
 999                 dbg("%s - event received", __func__);
1000         } else if (data[0] == WHITEHEAT_GET_DTR_RTS) {
1001                 memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1);
1002                 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
1003                 wake_up(&command_info->wait_command);
1004         } else {
1005                 dbg("%s - bad reply from firmware", __func__);
1006         }
1007
1008         /* Continue trying to always read */
1009         command_port->read_urb->dev = command_port->serial->dev;
1010         result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
1011         if (result)
1012                 dbg("%s - failed resubmitting read urb, error %d", __func__, result);
1013 }
1014
1015
1016 static void whiteheat_read_callback(struct urb *urb)
1017 {
1018         struct usb_serial_port *port = urb->context;
1019         struct whiteheat_urb_wrap *wrap;
1020         unsigned char *data = urb->transfer_buffer;
1021         struct whiteheat_private *info = usb_get_serial_port_data(port);
1022         int status = urb->status;
1023
1024         dbg("%s - port %d", __func__, port->number);
1025
1026         spin_lock(&info->lock);
1027         wrap = urb_to_wrap(urb, &info->rx_urbs_submitted);
1028         if (!wrap) {
1029                 spin_unlock(&info->lock);
1030                 err("%s - Not my urb!", __func__);
1031                 return;
1032         }
1033         list_del(&wrap->list);
1034         spin_unlock(&info->lock);
1035
1036         if (status) {
1037                 dbg("%s - nonzero read bulk status received: %d",
1038                     __func__, status);
1039                 spin_lock(&info->lock);
1040                 list_add(&wrap->list, &info->rx_urbs_free);
1041                 spin_unlock(&info->lock);
1042                 return;
1043         }
1044
1045         usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
1046
1047         spin_lock(&info->lock);
1048         list_add_tail(&wrap->list, &info->rx_urb_q);
1049         if (info->flags & THROTTLED) {
1050                 info->flags |= ACTUALLY_THROTTLED;
1051                 spin_unlock(&info->lock);
1052                 return;
1053         }
1054         spin_unlock(&info->lock);
1055
1056         schedule_work(&info->rx_work);
1057 }
1058
1059
1060 static void whiteheat_write_callback(struct urb *urb)
1061 {
1062         struct usb_serial_port *port = urb->context;
1063         struct whiteheat_private *info = usb_get_serial_port_data(port);
1064         struct whiteheat_urb_wrap *wrap;
1065         int status = urb->status;
1066
1067         dbg("%s - port %d", __func__, port->number);
1068
1069         spin_lock(&info->lock);
1070         wrap = urb_to_wrap(urb, &info->tx_urbs_submitted);
1071         if (!wrap) {
1072                 spin_unlock(&info->lock);
1073                 err("%s - Not my urb!", __func__);
1074                 return;
1075         }
1076         list_move(&wrap->list, &info->tx_urbs_free);
1077         spin_unlock(&info->lock);
1078
1079         if (status) {
1080                 dbg("%s - nonzero write bulk status received: %d",
1081                     __func__, status);
1082                 return;
1083         }
1084
1085         usb_serial_port_softint(port);
1086 }
1087
1088
1089 /*****************************************************************************
1090  * Connect Tech's White Heat firmware interface
1091  *****************************************************************************/
1092 static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize)
1093 {
1094         struct usb_serial_port *command_port;
1095         struct whiteheat_command_private *command_info;
1096         struct whiteheat_private *info;
1097         __u8 *transfer_buffer;
1098         int retval = 0;
1099         int t;
1100
1101         dbg("%s - command %d", __func__, command);
1102
1103         command_port = port->serial->port[COMMAND_PORT];
1104         command_info = usb_get_serial_port_data(command_port);
1105         mutex_lock(&command_info->mutex);
1106         command_info->command_finished = false;
1107
1108         transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
1109         transfer_buffer[0] = command;
1110         memcpy (&transfer_buffer[1], data, datasize);
1111         command_port->write_urb->transfer_buffer_length = datasize + 1;
1112         command_port->write_urb->dev = port->serial->dev;
1113         retval = usb_submit_urb (command_port->write_urb, GFP_NOIO);
1114         if (retval) {
1115                 dbg("%s - submit urb failed", __func__);
1116                 goto exit;
1117         }
1118
1119         /* wait for the command to complete */
1120         t = wait_event_timeout(command_info->wait_command,
1121                 (bool)command_info->command_finished, COMMAND_TIMEOUT);
1122         if (!t)
1123                 usb_kill_urb(command_port->write_urb);
1124
1125         if (command_info->command_finished == false) {
1126                 dbg("%s - command timed out.", __func__);
1127                 retval = -ETIMEDOUT;
1128                 goto exit;
1129         }
1130
1131         if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) {
1132                 dbg("%s - command failed.", __func__);
1133                 retval = -EIO;
1134                 goto exit;
1135         }
1136
1137         if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
1138                 dbg("%s - command completed.", __func__);
1139                 switch (command) {
1140                         case WHITEHEAT_GET_DTR_RTS:
1141                                 info = usb_get_serial_port_data(port);
1142                                 memcpy(&info->mcr, command_info->result_buffer, sizeof(struct whiteheat_dr_info));
1143                                 break;
1144                 }
1145         }
1146
1147 exit:
1148         mutex_unlock(&command_info->mutex);
1149         return retval;
1150 }
1151
1152
1153 static int firm_open(struct usb_serial_port *port) {
1154         struct whiteheat_simple open_command;
1155
1156         open_command.port = port->number - port->serial->minor + 1;
1157         return firm_send_command(port, WHITEHEAT_OPEN, (__u8 *)&open_command, sizeof(open_command));
1158 }
1159
1160
1161 static int firm_close(struct usb_serial_port *port) {
1162         struct whiteheat_simple close_command;
1163
1164         close_command.port = port->number - port->serial->minor + 1;
1165         return firm_send_command(port, WHITEHEAT_CLOSE, (__u8 *)&close_command, sizeof(close_command));
1166 }
1167
1168
1169 static int firm_setup_port(struct usb_serial_port *port) {
1170         struct whiteheat_port_settings port_settings;
1171         unsigned int cflag = port->tty->termios->c_cflag;
1172
1173         port_settings.port = port->number + 1;
1174
1175         /* get the byte size */
1176         switch (cflag & CSIZE) {
1177                 case CS5:       port_settings.bits = 5;   break;
1178                 case CS6:       port_settings.bits = 6;   break;
1179                 case CS7:       port_settings.bits = 7;   break;
1180                 default:
1181                 case CS8:       port_settings.bits = 8;   break;
1182         }
1183         dbg("%s - data bits = %d", __func__, port_settings.bits);
1184
1185         /* determine the parity */
1186         if (cflag & PARENB)
1187                 if (cflag & CMSPAR)
1188                         if (cflag & PARODD)
1189                                 port_settings.parity = WHITEHEAT_PAR_MARK;
1190                         else
1191                                 port_settings.parity = WHITEHEAT_PAR_SPACE;
1192                 else
1193                         if (cflag & PARODD)
1194                                 port_settings.parity = WHITEHEAT_PAR_ODD;
1195                         else
1196                                 port_settings.parity = WHITEHEAT_PAR_EVEN;
1197         else
1198                 port_settings.parity = WHITEHEAT_PAR_NONE;
1199         dbg("%s - parity = %c", __func__, port_settings.parity);
1200
1201         /* figure out the stop bits requested */
1202         if (cflag & CSTOPB)
1203                 port_settings.stop = 2;
1204         else
1205                 port_settings.stop = 1;
1206         dbg("%s - stop bits = %d", __func__, port_settings.stop);
1207
1208         /* figure out the flow control settings */
1209         if (cflag & CRTSCTS)
1210                 port_settings.hflow = (WHITEHEAT_HFLOW_CTS | WHITEHEAT_HFLOW_RTS);
1211         else
1212                 port_settings.hflow = WHITEHEAT_HFLOW_NONE;
1213         dbg("%s - hardware flow control = %s %s %s %s", __func__,
1214             (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "",
1215             (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
1216             (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
1217             (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
1218
1219         /* determine software flow control */
1220         if (I_IXOFF(port->tty))
1221                 port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
1222         else
1223                 port_settings.sflow = WHITEHEAT_SFLOW_NONE;
1224         dbg("%s - software flow control = %c", __func__, port_settings.sflow);
1225
1226         port_settings.xon = START_CHAR(port->tty);
1227         port_settings.xoff = STOP_CHAR(port->tty);
1228         dbg("%s - XON = %2x, XOFF = %2x", __func__, port_settings.xon, port_settings.xoff);
1229
1230         /* get the baud rate wanted */
1231         port_settings.baud = tty_get_baud_rate(port->tty);
1232         dbg("%s - baud rate = %d", __func__, port_settings.baud);
1233
1234         /* fixme: should set validated settings */
1235         tty_encode_baud_rate(port->tty, port_settings.baud, port_settings.baud);
1236         /* handle any settings that aren't specified in the tty structure */
1237         port_settings.lloop = 0;
1238
1239         /* now send the message to the device */
1240         return firm_send_command(port, WHITEHEAT_SETUP_PORT, (__u8 *)&port_settings, sizeof(port_settings));
1241 }
1242
1243
1244 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) {
1245         struct whiteheat_set_rdb rts_command;
1246
1247         rts_command.port = port->number - port->serial->minor + 1;
1248         rts_command.state = onoff;
1249         return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&rts_command, sizeof(rts_command));
1250 }
1251
1252
1253 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) {
1254         struct whiteheat_set_rdb dtr_command;
1255
1256         dtr_command.port = port->number - port->serial->minor + 1;
1257         dtr_command.state = onoff;
1258         return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&dtr_command, sizeof(dtr_command));
1259 }
1260
1261
1262 static int firm_set_break(struct usb_serial_port *port, __u8 onoff) {
1263         struct whiteheat_set_rdb break_command;
1264
1265         break_command.port = port->number - port->serial->minor + 1;
1266         break_command.state = onoff;
1267         return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&break_command, sizeof(break_command));
1268 }
1269
1270
1271 static int firm_purge(struct usb_serial_port *port, __u8 rxtx) {
1272         struct whiteheat_purge purge_command;
1273
1274         purge_command.port = port->number - port->serial->minor + 1;
1275         purge_command.what = rxtx;
1276         return firm_send_command(port, WHITEHEAT_PURGE, (__u8 *)&purge_command, sizeof(purge_command));
1277 }
1278
1279
1280 static int firm_get_dtr_rts(struct usb_serial_port *port) {
1281         struct whiteheat_simple get_dr_command;
1282
1283         get_dr_command.port = port->number - port->serial->minor + 1;
1284         return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, (__u8 *)&get_dr_command, sizeof(get_dr_command));
1285 }
1286
1287
1288 static int firm_report_tx_done(struct usb_serial_port *port) {
1289         struct whiteheat_simple close_command;
1290
1291         close_command.port = port->number - port->serial->minor + 1;
1292         return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, (__u8 *)&close_command, sizeof(close_command));
1293 }
1294
1295
1296 /*****************************************************************************
1297  * Connect Tech's White Heat utility functions
1298  *****************************************************************************/
1299 static int start_command_port(struct usb_serial *serial)
1300 {
1301         struct usb_serial_port *command_port;
1302         struct whiteheat_command_private *command_info;
1303         int retval = 0;
1304
1305         command_port = serial->port[COMMAND_PORT];
1306         command_info = usb_get_serial_port_data(command_port);
1307         mutex_lock(&command_info->mutex);
1308         if (!command_info->port_running) {
1309                 /* Work around HCD bugs */
1310                 usb_clear_halt(serial->dev, command_port->read_urb->pipe);
1311
1312                 command_port->read_urb->dev = serial->dev;
1313                 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
1314                 if (retval) {
1315                         err("%s - failed submitting read urb, error %d", __func__, retval);
1316                         goto exit;
1317                 }
1318         }
1319         command_info->port_running++;
1320
1321 exit:
1322         mutex_unlock(&command_info->mutex);
1323         return retval;
1324 }
1325
1326
1327 static void stop_command_port(struct usb_serial *serial)
1328 {
1329         struct usb_serial_port *command_port;
1330         struct whiteheat_command_private *command_info;
1331
1332         command_port = serial->port[COMMAND_PORT];
1333         command_info = usb_get_serial_port_data(command_port);
1334         mutex_lock(&command_info->mutex);
1335         command_info->port_running--;
1336         if (!command_info->port_running)
1337                 usb_kill_urb(command_port->read_urb);
1338         mutex_unlock(&command_info->mutex);
1339 }
1340
1341
1342 static int start_port_read(struct usb_serial_port *port)
1343 {
1344         struct whiteheat_private *info = usb_get_serial_port_data(port);
1345         struct whiteheat_urb_wrap *wrap;
1346         struct urb *urb;
1347         int retval = 0;
1348         unsigned long flags;
1349         struct list_head *tmp;
1350         struct list_head *tmp2;
1351
1352         spin_lock_irqsave(&info->lock, flags);
1353
1354         list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
1355                 list_del(tmp);
1356                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1357                 urb = wrap->urb;
1358                 urb->dev = port->serial->dev;
1359                 spin_unlock_irqrestore(&info->lock, flags);
1360                 retval = usb_submit_urb(urb, GFP_KERNEL);
1361                 if (retval) {
1362                         spin_lock_irqsave(&info->lock, flags);
1363                         list_add(tmp, &info->rx_urbs_free);
1364                         list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
1365                                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1366                                 urb = wrap->urb;
1367                                 list_del(tmp);
1368                                 spin_unlock_irqrestore(&info->lock, flags);
1369                                 usb_kill_urb(urb);
1370                                 spin_lock_irqsave(&info->lock, flags);
1371                                 list_add(tmp, &info->rx_urbs_free);
1372                         }
1373                         break;
1374                 }
1375                 spin_lock_irqsave(&info->lock, flags);
1376                 list_add(tmp, &info->rx_urbs_submitted);
1377         }
1378
1379         spin_unlock_irqrestore(&info->lock, flags);
1380
1381         return retval;
1382 }
1383
1384
1385 static struct whiteheat_urb_wrap *urb_to_wrap(struct urb* urb, struct list_head *head)
1386 {
1387         struct whiteheat_urb_wrap *wrap;
1388         struct list_head *tmp;
1389
1390         list_for_each(tmp, head) {
1391                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1392                 if (wrap->urb == urb)
1393                         return wrap;
1394         }
1395
1396         return NULL;
1397 }
1398
1399
1400 static struct list_head *list_first(struct list_head *head)
1401 {
1402         return head->next;
1403 }
1404
1405
1406 static void rx_data_softint(struct work_struct *work)
1407 {
1408         struct whiteheat_private *info =
1409                 container_of(work, struct whiteheat_private, rx_work);
1410         struct usb_serial_port *port = info->port;
1411         struct tty_struct *tty = port->tty;
1412         struct whiteheat_urb_wrap *wrap;
1413         struct urb *urb;
1414         unsigned long flags;
1415         struct list_head *tmp;
1416         struct list_head *tmp2;
1417         int result;
1418         int sent = 0;
1419
1420         spin_lock_irqsave(&info->lock, flags);
1421         if (info->flags & THROTTLED) {
1422                 spin_unlock_irqrestore(&info->lock, flags);
1423                 return;
1424         }
1425
1426         list_for_each_safe(tmp, tmp2, &info->rx_urb_q) {
1427                 list_del(tmp);
1428                 spin_unlock_irqrestore(&info->lock, flags);
1429
1430                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1431                 urb = wrap->urb;
1432
1433                 if (tty && urb->actual_length) {
1434                         int len = tty_buffer_request_room(tty, urb->actual_length);
1435                         /* This stuff can go away now I suspect */
1436                         if (unlikely(len < urb->actual_length)) {
1437                                 spin_lock_irqsave(&info->lock, flags);
1438                                 list_add(tmp, &info->rx_urb_q);
1439                                 spin_unlock_irqrestore(&info->lock, flags);
1440                                 tty_flip_buffer_push(tty);
1441                                 schedule_work(&info->rx_work);
1442                                 return;
1443                         }
1444                         tty_insert_flip_string(tty, urb->transfer_buffer, len);
1445                         sent += len;
1446                 }
1447
1448                 urb->dev = port->serial->dev;
1449                 result = usb_submit_urb(urb, GFP_ATOMIC);
1450                 if (result) {
1451                         err("%s - failed resubmitting read urb, error %d", __func__, result);
1452                         spin_lock_irqsave(&info->lock, flags);
1453                         list_add(tmp, &info->rx_urbs_free);
1454                         continue;
1455                 }
1456
1457                 spin_lock_irqsave(&info->lock, flags);
1458                 list_add(tmp, &info->rx_urbs_submitted);
1459         }
1460         spin_unlock_irqrestore(&info->lock, flags);
1461
1462         if (sent)
1463                 tty_flip_buffer_push(tty);
1464 }
1465
1466
1467 /*****************************************************************************
1468  * Connect Tech's White Heat module functions
1469  *****************************************************************************/
1470 static int __init whiteheat_init (void)
1471 {
1472         int retval;
1473         retval = usb_serial_register(&whiteheat_fake_device);
1474         if (retval)
1475                 goto failed_fake_register;
1476         retval = usb_serial_register(&whiteheat_device);
1477         if (retval)
1478                 goto failed_device_register;
1479         retval = usb_register(&whiteheat_driver);
1480         if (retval)
1481                 goto failed_usb_register;
1482         info(DRIVER_DESC " " DRIVER_VERSION);
1483         return 0;
1484 failed_usb_register:
1485         usb_serial_deregister(&whiteheat_device);
1486 failed_device_register:
1487         usb_serial_deregister(&whiteheat_fake_device);
1488 failed_fake_register:
1489         return retval;
1490 }
1491
1492
1493 static void __exit whiteheat_exit (void)
1494 {
1495         usb_deregister (&whiteheat_driver);
1496         usb_serial_deregister (&whiteheat_fake_device);
1497         usb_serial_deregister (&whiteheat_device);
1498 }
1499
1500
1501 module_init(whiteheat_init);
1502 module_exit(whiteheat_exit);
1503
1504 MODULE_AUTHOR( DRIVER_AUTHOR );
1505 MODULE_DESCRIPTION( DRIVER_DESC );
1506 MODULE_LICENSE("GPL");
1507
1508 module_param(urb_pool_size, int, 0);
1509 MODULE_PARM_DESC(urb_pool_size, "Number of urbs to use for buffering");
1510
1511 module_param(debug, bool, S_IRUGO | S_IWUSR);
1512 MODULE_PARM_DESC(debug, "Debug enabled or not");