err.no Git - linux-2.6/blob - drivers/usb/serial/option.c

   1 /*
   2   USB Driver for GSM modems
   3
   4   Copyright (C) 2005  Matthias Urlichs <smurf@smurf.noris.de>
   5
   6   This driver is free software; you can redistribute it and/or modify
   7   it under the terms of Version 2 of the GNU General Public License as
   8   published by the Free Software Foundation.
   9
  10   Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
  11
  12   History: see the git log.
  13
  14   Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
  15
  16   This driver exists because the "normal" serial driver doesn't work too well
  17   with GSM modems. Issues:
  18   - data loss -- one single Receive URB is not nearly enough
  19   - nonstandard flow (Option devices) control
  20   - controlling the baud rate doesn't make sense
  21
  22   This driver is named "option" because the most common device it's
  23   used for is a PC-Card (with an internal OHCI-USB interface, behind
  24   which the GSM interface sits), made by Option Inc.
  25
  26   Some of the "one port" devices actually exhibit multiple USB instances
  27   on the USB bus. This is not a bug, these ports are used for different
  28   device features.
  29 */
  30
  31 #define DRIVER_VERSION "v0.7.1"
  32 #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
  33 #define DRIVER_DESC "USB Driver for GSM modems"
  34
  35 #include <linux/kernel.h>
  36 #include <linux/jiffies.h>
  37 #include <linux/errno.h>
  38 #include <linux/tty.h>
  39 #include <linux/tty_flip.h>
  40 #include <linux/module.h>
  41 #include <linux/bitops.h>
  42 #include <linux/usb.h>
  43 #include <linux/usb/serial.h>
  44
  45 /* Function prototypes */
  46 static int  option_open(struct usb_serial_port *port, struct file *filp);
  47 static void option_close(struct usb_serial_port *port, struct file *filp);
  48 static int  option_startup(struct usb_serial *serial);
  49 static void option_shutdown(struct usb_serial *serial);
  50 static void option_rx_throttle(struct usb_serial_port *port);
  51 static void option_rx_unthrottle(struct usb_serial_port *port);
  52 static int  option_write_room(struct usb_serial_port *port);
  53
  54 static void option_instat_callback(struct urb *urb);
  55
  56 static int option_write(struct usb_serial_port *port,
  57                         const unsigned char *buf, int count);
  58
  59 static int  option_chars_in_buffer(struct usb_serial_port *port);
  60 static int  option_ioctl(struct usb_serial_port *port, struct file *file,
  61                         unsigned int cmd, unsigned long arg);
  62 static void option_set_termios(struct usb_serial_port *port,
  63                                 struct ktermios *old);
  64 static void option_break_ctl(struct usb_serial_port *port, int break_state);
  65 static int  option_tiocmget(struct usb_serial_port *port, struct file *file);
  66 static int  option_tiocmset(struct usb_serial_port *port, struct file *file,
  67                                 unsigned int set, unsigned int clear);
  68 static int  option_send_setup(struct usb_serial_port *port);
  69
  70 /* Vendor and product IDs */
  71 #define OPTION_VENDOR_ID                        0x0AF0
  72 #define OPTION_PRODUCT_COLT                     0x5000
  73 #define OPTION_PRODUCT_RICOLA                   0x6000
  74 #define OPTION_PRODUCT_RICOLA_LIGHT             0x6100
  75 #define OPTION_PRODUCT_RICOLA_QUAD              0x6200
  76 #define OPTION_PRODUCT_RICOLA_QUAD_LIGHT        0x6300
  77 #define OPTION_PRODUCT_RICOLA_NDIS              0x6050
  78 #define OPTION_PRODUCT_RICOLA_NDIS_LIGHT        0x6150
  79 #define OPTION_PRODUCT_RICOLA_NDIS_QUAD         0x6250
  80 #define OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT   0x6350
  81 #define OPTION_PRODUCT_COBRA                    0x6500
  82 #define OPTION_PRODUCT_COBRA_BUS                0x6501
  83 #define OPTION_PRODUCT_VIPER                    0x6600
  84 #define OPTION_PRODUCT_VIPER_BUS                0x6601
  85 #define OPTION_PRODUCT_GT_MAX_READY             0x6701
  86 #define OPTION_PRODUCT_GT_MAX                   0x6711
  87 #define OPTION_PRODUCT_FUJI_MODEM_LIGHT         0x6721
  88 #define OPTION_PRODUCT_FUJI_MODEM_GT            0x6741
  89 #define OPTION_PRODUCT_FUJI_MODEM_EX            0x6761
  90 #define OPTION_PRODUCT_FUJI_NETWORK_LIGHT       0x6731
  91 #define OPTION_PRODUCT_FUJI_NETWORK_GT          0x6751
  92 #define OPTION_PRODUCT_FUJI_NETWORK_EX          0x6771
  93 #define OPTION_PRODUCT_KOI_MODEM                0x6800
  94 #define OPTION_PRODUCT_KOI_NETWORK              0x6811
  95 #define OPTION_PRODUCT_SCORPION_MODEM           0x6901
  96 #define OPTION_PRODUCT_SCORPION_NETWORK         0x6911
  97 #define OPTION_PRODUCT_ETNA_MODEM               0x7001
  98 #define OPTION_PRODUCT_ETNA_NETWORK             0x7011
  99 #define OPTION_PRODUCT_ETNA_MODEM_LITE          0x7021
 100 #define OPTION_PRODUCT_ETNA_MODEM_GT            0x7041
 101 #define OPTION_PRODUCT_ETNA_MODEM_EX            0x7061
 102 #define OPTION_PRODUCT_ETNA_NETWORK_LITE        0x7031
 103 #define OPTION_PRODUCT_ETNA_NETWORK_GT          0x7051
 104 #define OPTION_PRODUCT_ETNA_NETWORK_EX          0x7071
 105 #define OPTION_PRODUCT_ETNA_KOI_MODEM           0x7100
 106 #define OPTION_PRODUCT_ETNA_KOI_NETWORK         0x7111
 107
 108 #define HUAWEI_VENDOR_ID                        0x12D1
 109 #define HUAWEI_PRODUCT_E600                     0x1001
 110 #define HUAWEI_PRODUCT_E220                     0x1003
 111 #define HUAWEI_PRODUCT_E220BIS                  0x1004
 112
 113 #define NOVATELWIRELESS_VENDOR_ID               0x1410
 114 #define DELL_VENDOR_ID                          0x413C
 115
 116 #define ANYDATA_VENDOR_ID                       0x16d5
 117 #define ANYDATA_PRODUCT_ADU_E100A               0x6501
 118 #define ANYDATA_PRODUCT_ADU_500A                0x6502
 119
 120 #define BANDRICH_VENDOR_ID                      0x1A8D
 121 #define BANDRICH_PRODUCT_C100_1                 0x1002
 122 #define BANDRICH_PRODUCT_C100_2                 0x1003
 123
 124 static struct usb_device_id option_ids[] = {
 125         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 126         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
 127         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_LIGHT) },
 128         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD) },
 129         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD_LIGHT) },
 130         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS) },
 131         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_LIGHT) },
 132         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD) },
 133         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT) },
 134         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
 135         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA_BUS) },
 136         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER) },
 137         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER_BUS) },
 138         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GT_MAX_READY) },
 139         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GT_MAX) },
 140         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_LIGHT) },
 141         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_GT) },
 142         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_EX) },
 143         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_LIGHT) },
 144         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_GT) },
 145         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_EX) },
 146         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_KOI_MODEM) },
 147         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_KOI_NETWORK) },
 148         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_SCORPION_MODEM) },
 149         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_SCORPION_NETWORK) },
 150         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM) },
 151         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK) },
 152         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_LITE) },
 153         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) },
 154         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) },
 155         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_LITE) },
 156         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_GT) },
 157         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_EX) },
 158         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
 159         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) },
 160         { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
 161         { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
 162         { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
 163         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1100) }, /* Novatel Merlin XS620/S640 */
 164         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1110) }, /* Novatel Merlin S620 */
 165         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1120) }, /* Novatel Merlin EX720 */
 166         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1130) }, /* Novatel Merlin S720 */
 167         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1400) }, /* Novatel U730 */
 168         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1410) }, /* Novatel U740 */
 169         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1420) }, /* Novatel EU870 */
 170         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1430) }, /* Novatel Merlin XU870 HSDPA/3G */
 171         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2100) }, /* Novatel EV620 CDMA/EV-DO */
 172         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2110) }, /* Novatel Merlin ES620 / Merlin ES720 / Ovation U720 */
 173         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */
 174         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */
 175         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4100) }, /* Novatel U727 */
 176         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4400) }, /* Novatel MC950 */
 177         { USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
 178         { USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
 179         { USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
 180         { USB_DEVICE(DELL_VENDOR_ID, 0x8117) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */
 181         { USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */
 182         { USB_DEVICE(DELL_VENDOR_ID, 0x8128) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */
 183         { USB_DEVICE(DELL_VENDOR_ID, 0x8136) }, /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */
 184         { USB_DEVICE(DELL_VENDOR_ID, 0x8137) }, /* Dell Wireless HSDPA 5520 */
 185         { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
 186         { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
 187         { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
 188         { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
 189         { } /* Terminating entry */
 190 };
 191 MODULE_DEVICE_TABLE(usb, option_ids);
 192
 193 static struct usb_driver option_driver = {
 194         .name       = "option",
 195         .probe      = usb_serial_probe,
 196         .disconnect = usb_serial_disconnect,
 197         .id_table   = option_ids,
 198         .no_dynamic_id =        1,
 199 };
 200
 201 /* The card has three separate interfaces, which the serial driver
 202  * recognizes separately, thus num_port=1.
 203  */
 204
 205 static struct usb_serial_driver option_1port_device = {
 206         .driver = {
 207                 .owner =        THIS_MODULE,
 208                 .name =         "option1",
 209         },
 210         .description       = "GSM modem (1-port)",
 211         .usb_driver        = &option_driver,
 212         .id_table          = option_ids,
 213         .num_interrupt_in  = NUM_DONT_CARE,
 214         .num_bulk_in       = NUM_DONT_CARE,
 215         .num_bulk_out      = NUM_DONT_CARE,
 216         .num_ports         = 1,
 217         .open              = option_open,
 218         .close             = option_close,
 219         .write             = option_write,
 220         .write_room        = option_write_room,
 221         .chars_in_buffer   = option_chars_in_buffer,
 222         .throttle          = option_rx_throttle,
 223         .unthrottle        = option_rx_unthrottle,
 224         .ioctl             = option_ioctl,
 225         .set_termios       = option_set_termios,
 226         .break_ctl         = option_break_ctl,
 227         .tiocmget          = option_tiocmget,
 228         .tiocmset          = option_tiocmset,
 229         .attach            = option_startup,
 230         .shutdown          = option_shutdown,
 231         .read_int_callback = option_instat_callback,
 232 };
 233
 234 #ifdef CONFIG_USB_DEBUG
 235 static int debug;
 236 #else
 237 #define debug 0
 238 #endif
 239
 240 /* per port private data */
 241
 242 #define N_IN_URB 4
 243 #define N_OUT_URB 1
 244 #define IN_BUFLEN 4096
 245 #define OUT_BUFLEN 128
 246
 247 struct option_port_private {
 248         /* Input endpoints and buffer for this port */
 249         struct urb *in_urbs[N_IN_URB];
 250         char in_buffer[N_IN_URB][IN_BUFLEN];
 251         /* Output endpoints and buffer for this port */
 252         struct urb *out_urbs[N_OUT_URB];
 253         char out_buffer[N_OUT_URB][OUT_BUFLEN];
 254         unsigned long out_busy;         /* Bit vector of URBs in use */
 255
 256         /* Settings for the port */
 257         int rts_state;  /* Handshaking pins (outputs) */
 258         int dtr_state;
 259         int cts_state;  /* Handshaking pins (inputs) */
 260         int dsr_state;
 261         int dcd_state;
 262         int ri_state;
 263
 264         unsigned long tx_start_time[N_OUT_URB];
 265 };
 266
 267 /* Functions used by new usb-serial code. */
 268 static int __init option_init(void)
 269 {
 270         int retval;
 271         retval = usb_serial_register(&option_1port_device);
 272         if (retval)
 273                 goto failed_1port_device_register;
 274         retval = usb_register(&option_driver);
 275         if (retval)
 276                 goto failed_driver_register;
 277
 278         info(DRIVER_DESC ": " DRIVER_VERSION);
 279
 280         return 0;
 281
 282 failed_driver_register:
 283         usb_serial_deregister (&option_1port_device);
 284 failed_1port_device_register:
 285         return retval;
 286 }
 287
 288 static void __exit option_exit(void)
 289 {
 290         usb_deregister (&option_driver);
 291         usb_serial_deregister (&option_1port_device);
 292 }
 293
 294 module_init(option_init);
 295 module_exit(option_exit);
 296
 297 static void option_rx_throttle(struct usb_serial_port *port)
 298 {
 299         dbg("%s", __FUNCTION__);
 300 }
 301
 302 static void option_rx_unthrottle(struct usb_serial_port *port)
 303 {
 304         dbg("%s", __FUNCTION__);
 305 }
 306
 307 static void option_break_ctl(struct usb_serial_port *port, int break_state)
 308 {
 309         /* Unfortunately, I don't know how to send a break */
 310         dbg("%s", __FUNCTION__);
 311 }
 312
 313 static void option_set_termios(struct usb_serial_port *port,
 314                         struct ktermios *old_termios)
 315 {
 316         dbg("%s", __FUNCTION__);
 317         /* Doesn't support option setting */
 318         tty_termios_copy_hw(port->tty->termios, old_termios);
 319         option_send_setup(port);
 320 }
 321
 322 static int option_tiocmget(struct usb_serial_port *port, struct file *file)
 323 {
 324         unsigned int value;
 325         struct option_port_private *portdata;
 326
 327         portdata = usb_get_serial_port_data(port);
 328
 329         value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
 330                 ((portdata->dtr_state) ? TIOCM_DTR : 0) |
 331                 ((portdata->cts_state) ? TIOCM_CTS : 0) |
 332                 ((portdata->dsr_state) ? TIOCM_DSR : 0) |
 333                 ((portdata->dcd_state) ? TIOCM_CAR : 0) |
 334                 ((portdata->ri_state) ? TIOCM_RNG : 0);
 335
 336         return value;
 337 }
 338
 339 static int option_tiocmset(struct usb_serial_port *port, struct file *file,
 340                         unsigned int set, unsigned int clear)
 341 {
 342         struct option_port_private *portdata;
 343
 344         portdata = usb_get_serial_port_data(port);
 345
 346         if (set & TIOCM_RTS)
 347                 portdata->rts_state = 1;
 348         if (set & TIOCM_DTR)
 349                 portdata->dtr_state = 1;
 350
 351         if (clear & TIOCM_RTS)
 352                 portdata->rts_state = 0;
 353         if (clear & TIOCM_DTR)
 354                 portdata->dtr_state = 0;
 355         return option_send_setup(port);
 356 }
 357
 358 static int option_ioctl(struct usb_serial_port *port, struct file *file,
 359                         unsigned int cmd, unsigned long arg)
 360 {
 361         return -ENOIOCTLCMD;
 362 }
 363
 364 /* Write */
 365 static int option_write(struct usb_serial_port *port,
 366                         const unsigned char *buf, int count)
 367 {
 368         struct option_port_private *portdata;
 369         int i;
 370         int left, todo;
 371         struct urb *this_urb = NULL; /* spurious */
 372         int err;
 373
 374         portdata = usb_get_serial_port_data(port);
 375
 376         dbg("%s: write (%d chars)", __FUNCTION__, count);
 377
 378         i = 0;
 379         left = count;
 380         for (i=0; left > 0 && i < N_OUT_URB; i++) {
 381                 todo = left;
 382                 if (todo > OUT_BUFLEN)
 383                         todo = OUT_BUFLEN;
 384
 385                 this_urb = portdata->out_urbs[i];
 386                 if (test_and_set_bit(i, &portdata->out_busy)) {
 387                         if (time_before(jiffies,
 388                                         portdata->tx_start_time[i] + 10 * HZ))
 389                                 continue;
 390                         usb_unlink_urb(this_urb);
 391                         continue;
 392                 }
 393                 if (this_urb->status != 0)
 394                         dbg("usb_write %p failed (err=%d)",
 395                                 this_urb, this_urb->status);
 396
 397                 dbg("%s: endpoint %d buf %d", __FUNCTION__,
 398                         usb_pipeendpoint(this_urb->pipe), i);
 399
 400                 /* send the data */
 401                 memcpy (this_urb->transfer_buffer, buf, todo);
 402                 this_urb->transfer_buffer_length = todo;
 403
 404                 this_urb->dev = port->serial->dev;
 405                 err = usb_submit_urb(this_urb, GFP_ATOMIC);
 406                 if (err) {
 407                         dbg("usb_submit_urb %p (write bulk) failed "
 408                                 "(%d, has %d)", this_urb,
 409                                 err, this_urb->status);
 410                         clear_bit(i, &portdata->out_busy);
 411                         continue;
 412                 }
 413                 portdata->tx_start_time[i] = jiffies;
 414                 buf += todo;
 415                 left -= todo;
 416         }
 417
 418         count -= left;
 419         dbg("%s: wrote (did %d)", __FUNCTION__, count);
 420         return count;
 421 }
 422
 423 static void option_indat_callback(struct urb *urb)
 424 {
 425         int err;
 426         int endpoint;
 427         struct usb_serial_port *port;
 428         struct tty_struct *tty;
 429         unsigned char *data = urb->transfer_buffer;
 430         int status = urb->status;
 431
 432         dbg("%s: %p", __FUNCTION__, urb);
 433
 434         endpoint = usb_pipeendpoint(urb->pipe);
 435         port = (struct usb_serial_port *) urb->context;
 436
 437         if (status) {
 438                 dbg("%s: nonzero status: %d on endpoint %02x.",
 439                     __FUNCTION__, status, endpoint);
 440         } else {
 441                 tty = port->tty;
 442                 if (urb->actual_length) {
 443                         tty_buffer_request_room(tty, urb->actual_length);
 444                         tty_insert_flip_string(tty, data, urb->actual_length);
 445                         tty_flip_buffer_push(tty);
 446                 } else {
 447                         dbg("%s: empty read urb received", __FUNCTION__);
 448                 }
 449
 450                 /* Resubmit urb so we continue receiving */
 451                 if (port->open_count && status != -ESHUTDOWN) {
 452                         err = usb_submit_urb(urb, GFP_ATOMIC);
 453                         if (err)
 454                                 printk(KERN_ERR "%s: resubmit read urb failed. "
 455                                         "(%d)", __FUNCTION__, err);
 456                 }
 457         }
 458         return;
 459 }
 460
 461 static void option_outdat_callback(struct urb *urb)
 462 {
 463         struct usb_serial_port *port;
 464         struct option_port_private *portdata;
 465         int i;
 466
 467         dbg("%s", __FUNCTION__);
 468
 469         port = (struct usb_serial_port *) urb->context;
 470
 471         usb_serial_port_softint(port);
 472
 473         portdata = usb_get_serial_port_data(port);
 474         for (i = 0; i < N_OUT_URB; ++i) {
 475                 if (portdata->out_urbs[i] == urb) {
 476                         smp_mb__before_clear_bit();
 477                         clear_bit(i, &portdata->out_busy);
 478                         break;
 479                 }
 480         }
 481 }
 482
 483 static void option_instat_callback(struct urb *urb)
 484 {
 485         int err;
 486         int status = urb->status;
 487         struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
 488         struct option_port_private *portdata = usb_get_serial_port_data(port);
 489         struct usb_serial *serial = port->serial;
 490
 491         dbg("%s", __FUNCTION__);
 492         dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata);
 493
 494         if (status == 0) {
 495                 struct usb_ctrlrequest *req_pkt =
 496                                 (struct usb_ctrlrequest *)urb->transfer_buffer;
 497
 498                 if (!req_pkt) {
 499                         dbg("%s: NULL req_pkt\n", __FUNCTION__);
 500                         return;
 501                 }
 502                 if ((req_pkt->bRequestType == 0xA1) &&
 503                                 (req_pkt->bRequest == 0x20)) {
 504                         int old_dcd_state;
 505                         unsigned char signals = *((unsigned char *)
 506                                         urb->transfer_buffer +
 507                                         sizeof(struct usb_ctrlrequest));
 508
 509                         dbg("%s: signal x%x", __FUNCTION__, signals);
 510
 511                         old_dcd_state = portdata->dcd_state;
 512                         portdata->cts_state = 1;
 513                         portdata->dcd_state = ((signals & 0x01) ? 1 : 0);
 514                         portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
 515                         portdata->ri_state = ((signals & 0x08) ? 1 : 0);
 516
 517                         if (port->tty && !C_CLOCAL(port->tty) &&
 518                                         old_dcd_state && !portdata->dcd_state)
 519                                 tty_hangup(port->tty);
 520                 } else {
 521                         dbg("%s: type %x req %x", __FUNCTION__,
 522                                 req_pkt->bRequestType,req_pkt->bRequest);
 523                 }
 524         } else
 525                 dbg("%s: error %d", __FUNCTION__, status);
 526
 527         /* Resubmit urb so we continue receiving IRQ data */
 528         if (status != -ESHUTDOWN) {
 529                 urb->dev = serial->dev;
 530                 err = usb_submit_urb(urb, GFP_ATOMIC);
 531                 if (err)
 532                         dbg("%s: resubmit intr urb failed. (%d)",
 533                                 __FUNCTION__, err);
 534         }
 535 }
 536
 537 static int option_write_room(struct usb_serial_port *port)
 538 {
 539         struct option_port_private *portdata;
 540         int i;
 541         int data_len = 0;
 542         struct urb *this_urb;
 543
 544         portdata = usb_get_serial_port_data(port);
 545
 546         for (i=0; i < N_OUT_URB; i++) {
 547                 this_urb = portdata->out_urbs[i];
 548                 if (this_urb && !test_bit(i, &portdata->out_busy))
 549                         data_len += OUT_BUFLEN;
 550         }
 551
 552         dbg("%s: %d", __FUNCTION__, data_len);
 553         return data_len;
 554 }
 555
 556 static int option_chars_in_buffer(struct usb_serial_port *port)
 557 {
 558         struct option_port_private *portdata;
 559         int i;
 560         int data_len = 0;
 561         struct urb *this_urb;
 562
 563         portdata = usb_get_serial_port_data(port);
 564
 565         for (i=0; i < N_OUT_URB; i++) {
 566                 this_urb = portdata->out_urbs[i];
 567                 if (this_urb && test_bit(i, &portdata->out_busy))
 568                         data_len += this_urb->transfer_buffer_length;
 569         }
 570         dbg("%s: %d", __FUNCTION__, data_len);
 571         return data_len;
 572 }
 573
 574 static int option_open(struct usb_serial_port *port, struct file *filp)
 575 {
 576         struct option_port_private *portdata;
 577         struct usb_serial *serial = port->serial;
 578         int i, err;
 579         struct urb *urb;
 580
 581         portdata = usb_get_serial_port_data(port);
 582
 583         dbg("%s", __FUNCTION__);
 584
 585         /* Set some sane defaults */
 586         portdata->rts_state = 1;
 587         portdata->dtr_state = 1;
 588
 589         /* Reset low level data toggle and start reading from endpoints */
 590         for (i = 0; i < N_IN_URB; i++) {
 591                 urb = portdata->in_urbs[i];
 592                 if (! urb)
 593                         continue;
 594                 if (urb->dev != serial->dev) {
 595                         dbg("%s: dev %p != %p", __FUNCTION__,
 596                                 urb->dev, serial->dev);
 597                         continue;
 598                 }
 599
 600                 /*
 601                  * make sure endpoint data toggle is synchronized with the
 602                  * device
 603                  */
 604                 usb_clear_halt(urb->dev, urb->pipe);
 605
 606                 err = usb_submit_urb(urb, GFP_KERNEL);
 607                 if (err) {
 608                         dbg("%s: submit urb %d failed (%d) %d",
 609                                 __FUNCTION__, i, err,
 610                                 urb->transfer_buffer_length);
 611                 }
 612         }
 613
 614         /* Reset low level data toggle on out endpoints */
 615         for (i = 0; i < N_OUT_URB; i++) {
 616                 urb = portdata->out_urbs[i];
 617                 if (! urb)
 618                         continue;
 619                 urb->dev = serial->dev;
 620                 /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
 621                                 usb_pipeout(urb->pipe), 0); */
 622         }
 623
 624         port->tty->low_latency = 1;
 625
 626         option_send_setup(port);
 627
 628         return (0);
 629 }
 630
 631 static void option_close(struct usb_serial_port *port, struct file *filp)
 632 {
 633         int i;
 634         struct usb_serial *serial = port->serial;
 635         struct option_port_private *portdata;
 636
 637         dbg("%s", __FUNCTION__);
 638         portdata = usb_get_serial_port_data(port);
 639
 640         portdata->rts_state = 0;
 641         portdata->dtr_state = 0;
 642
 643         if (serial->dev) {
 644                 option_send_setup(port);
 645
 646                 /* Stop reading/writing urbs */
 647                 for (i = 0; i < N_IN_URB; i++)
 648                         usb_kill_urb(portdata->in_urbs[i]);
 649                 for (i = 0; i < N_OUT_URB; i++)
 650                         usb_kill_urb(portdata->out_urbs[i]);
 651         }
 652         port->tty = NULL;
 653 }
 654
 655 /* Helper functions used by option_setup_urbs */
 656 static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint,
 657                 int dir, void *ctx, char *buf, int len,
 658                 void (*callback)(struct urb *))
 659 {
 660         struct urb *urb;
 661
 662         if (endpoint == -1)
 663                 return NULL;            /* endpoint not needed */
 664
 665         urb = usb_alloc_urb(0, GFP_KERNEL);             /* No ISO */
 666         if (urb == NULL) {
 667                 dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint);
 668                 return NULL;
 669         }
 670
 671                 /* Fill URB using supplied data. */
 672         usb_fill_bulk_urb(urb, serial->dev,
 673                       usb_sndbulkpipe(serial->dev, endpoint) | dir,
 674                       buf, len, callback, ctx);
 675
 676         return urb;
 677 }
 678
 679 /* Setup urbs */
 680 static void option_setup_urbs(struct usb_serial *serial)
 681 {
 682         int i,j;
 683         struct usb_serial_port *port;
 684         struct option_port_private *portdata;
 685
 686         dbg("%s", __FUNCTION__);
 687
 688         for (i = 0; i < serial->num_ports; i++) {
 689                 port = serial->port[i];
 690                 portdata = usb_get_serial_port_data(port);
 691
 692         /* Do indat endpoints first */
 693                 for (j = 0; j < N_IN_URB; ++j) {
 694                         portdata->in_urbs[j] = option_setup_urb (serial,
 695                         port->bulk_in_endpointAddress, USB_DIR_IN, port,
 696                         portdata->in_buffer[j], IN_BUFLEN, option_indat_callback);
 697                 }
 698
 699                 /* outdat endpoints */
 700                 for (j = 0; j < N_OUT_URB; ++j) {
 701                         portdata->out_urbs[j] = option_setup_urb (serial,
 702                         port->bulk_out_endpointAddress, USB_DIR_OUT, port,
 703                         portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback);
 704                 }
 705         }
 706 }
 707
 708 static int option_send_setup(struct usb_serial_port *port)
 709 {
 710         struct usb_serial *serial = port->serial;
 711         struct option_port_private *portdata;
 712
 713         dbg("%s", __FUNCTION__);
 714
 715         if (port->number != 0)
 716                 return 0;
 717
 718         portdata = usb_get_serial_port_data(port);
 719
 720         if (port->tty) {
 721                 int val = 0;
 722                 if (portdata->dtr_state)
 723                         val |= 0x01;
 724                 if (portdata->rts_state)
 725                         val |= 0x02;
 726
 727                 return usb_control_msg(serial->dev,
 728                                 usb_rcvctrlpipe(serial->dev, 0),
 729                                 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
 730         }
 731
 732         return 0;
 733 }
 734
 735 static int option_startup(struct usb_serial *serial)
 736 {
 737         int i, err;
 738         struct usb_serial_port *port;
 739         struct option_port_private *portdata;
 740
 741         dbg("%s", __FUNCTION__);
 742
 743         /* Now setup per port private data */
 744         for (i = 0; i < serial->num_ports; i++) {
 745                 port = serial->port[i];
 746                 portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
 747                 if (!portdata) {
 748                         dbg("%s: kmalloc for option_port_private (%d) failed!.",
 749                                         __FUNCTION__, i);
 750                         return (1);
 751                 }
 752
 753                 usb_set_serial_port_data(port, portdata);
 754
 755                 if (! port->interrupt_in_urb)
 756                         continue;
 757                 err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 758                 if (err)
 759                         dbg("%s: submit irq_in urb failed %d",
 760                                 __FUNCTION__, err);
 761         }
 762
 763         option_setup_urbs(serial);
 764
 765         return (0);
 766 }
 767
 768 static void option_shutdown(struct usb_serial *serial)
 769 {
 770         int i, j;
 771         struct usb_serial_port *port;
 772         struct option_port_private *portdata;
 773
 774         dbg("%s", __FUNCTION__);
 775
 776         /* Stop reading/writing urbs */
 777         for (i = 0; i < serial->num_ports; ++i) {
 778                 port = serial->port[i];
 779                 portdata = usb_get_serial_port_data(port);
 780                 for (j = 0; j < N_IN_URB; j++)
 781                         usb_kill_urb(portdata->in_urbs[j]);
 782                 for (j = 0; j < N_OUT_URB; j++)
 783                         usb_kill_urb(portdata->out_urbs[j]);
 784         }
 785
 786         /* Now free them */
 787         for (i = 0; i < serial->num_ports; ++i) {
 788                 port = serial->port[i];
 789                 portdata = usb_get_serial_port_data(port);
 790
 791                 for (j = 0; j < N_IN_URB; j++) {
 792                         if (portdata->in_urbs[j]) {
 793                                 usb_free_urb(portdata->in_urbs[j]);
 794                                 portdata->in_urbs[j] = NULL;
 795                         }
 796                 }
 797                 for (j = 0; j < N_OUT_URB; j++) {
 798                         if (portdata->out_urbs[j]) {
 799                                 usb_free_urb(portdata->out_urbs[j]);
 800                                 portdata->out_urbs[j] = NULL;
 801                         }
 802                 }
 803         }
 804
 805         /* Now free per port private data */
 806         for (i = 0; i < serial->num_ports; i++) {
 807                 port = serial->port[i];
 808                 kfree(usb_get_serial_port_data(port));
 809         }
 810 }
 811
 812 MODULE_AUTHOR(DRIVER_AUTHOR);
 813 MODULE_DESCRIPTION(DRIVER_DESC);
 814 MODULE_VERSION(DRIVER_VERSION);
 815 MODULE_LICENSE("GPL");
 816
 817 #ifdef CONFIG_USB_DEBUG
 818 module_param(debug, bool, S_IRUGO | S_IWUSR);
 819 MODULE_PARM_DESC(debug, "Debug messages");
 820 #endif
 821