2 * USB Keyspan PDA / Xircom / Entregra Converter driver
4 * Copyright (C) 1999 - 2001 Greg Kroah-Hartman <greg@kroah.com>
5 * Copyright (C) 1999, 2000 Brian Warner <warner@lothar.com>
6 * Copyright (C) 2000 Al Borchers <borchers@steinerpoint.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * See Documentation/usb/usb-serial.txt for more information on using this driver
16 * cleaned up the Xircom support. Added ids for Entregra device which is
17 * the same as the Xircom device. Enabled the code to be compiled for
18 * either Xircom or Keyspan devices.
20 * (08/11/2001) Cristian M. Craciunescu
21 * support for Xircom PGSDB9
24 * switched from using spinlock to a semaphore, which fixes lots of problems.
27 * Identify version on module load.
29 * (11/01/2000) Adam J. Richter
30 * usb_device_id table support
33 * Fixed bug with urb->dev not being set properly, now that the usb
37 * Added locks for SMP safeness.
38 * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
41 * (07/20/2000) borchers
42 * - keyspan_pda_write no longer sleeps if it is called on interrupt time;
43 * PPP and the line discipline with stty echo on can call write on
44 * interrupt time and this would cause an oops if write slept
45 * - if keyspan_pda_write is in an interrupt, it will not call
46 * usb_control_msg (which sleeps) to query the room in the device
47 * buffer, it simply uses the current room value it has
48 * - if the urb is busy or if it is throttled keyspan_pda_write just
49 * returns 0, rather than sleeping to wait for this to change; the
50 * write_chan code in n_tty.c will sleep if needed before calling
51 * keyspan_pda_write again
52 * - if the device needs to be unthrottled, write now queues up the
53 * call to usb_control_msg (which sleeps) to unthrottle the device
54 * - the wakeups from keyspan_pda_write_bulk_callback are queued rather
55 * than done directly from the callback to avoid the race in write_chan
56 * - keyspan_pda_chars_in_buffer also indicates its buffer is full if the
57 * urb status is -EINPROGRESS, meaning it cannot write at the moment
60 * Added module_init and module_exit functions to handle the fact that this
61 * driver is a loadable module now.
64 * Split driver up into device specific pieces.
69 #include <linux/kernel.h>
70 #include <linux/errno.h>
71 #include <linux/init.h>
72 #include <linux/slab.h>
73 #include <linux/tty.h>
74 #include <linux/tty_driver.h>
75 #include <linux/tty_flip.h>
76 #include <linux/module.h>
77 #include <linux/spinlock.h>
78 #include <linux/workqueue.h>
79 #include <asm/uaccess.h>
80 #include <linux/usb.h>
81 #include <linux/usb/serial.h>
85 struct ezusb_hex_record {
91 /* make a simple define to handle if we are compiling keyspan_pda or xircom support */
92 #if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_KEYSPAN_PDA_MODULE)
97 #if defined(CONFIG_USB_SERIAL_XIRCOM) || defined(CONFIG_USB_SERIAL_XIRCOM_MODULE)
104 #include "keyspan_pda_fw.h"
108 #include "xircom_pgs_fw.h"
112 * Version Information
114 #define DRIVER_VERSION "v1.1"
115 #define DRIVER_AUTHOR "Brian Warner <warner@lothar.com>"
116 #define DRIVER_DESC "USB Keyspan PDA Converter driver"
118 struct keyspan_pda_private {
121 struct work_struct wakeup_work;
122 struct work_struct unthrottle_work;
123 struct usb_serial *serial;
124 struct usb_serial_port *port;
128 #define KEYSPAN_VENDOR_ID 0x06cd
129 #define KEYSPAN_PDA_FAKE_ID 0x0103
130 #define KEYSPAN_PDA_ID 0x0104 /* no clue */
132 /* For Xircom PGSDB9 and older Entregra version of the same device */
133 #define XIRCOM_VENDOR_ID 0x085a
134 #define XIRCOM_FAKE_ID 0x8027
135 #define ENTREGRA_VENDOR_ID 0x1645
136 #define ENTREGRA_FAKE_ID 0x8093
138 static struct usb_device_id id_table_combined [] = {
140 { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
143 { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
144 { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
146 { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
147 { } /* Terminating entry */
150 MODULE_DEVICE_TABLE (usb, id_table_combined);
152 static struct usb_driver keyspan_pda_driver = {
153 .name = "keyspan_pda",
154 .probe = usb_serial_probe,
155 .disconnect = usb_serial_disconnect,
156 .id_table = id_table_combined,
160 static struct usb_device_id id_table_std [] = {
161 { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
162 { } /* Terminating entry */
166 static struct usb_device_id id_table_fake [] = {
167 { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
168 { } /* Terminating entry */
173 static struct usb_device_id id_table_fake_xircom [] = {
174 { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
175 { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
180 static void keyspan_pda_wakeup_write(struct work_struct *work)
182 struct keyspan_pda_private *priv =
183 container_of(work, struct keyspan_pda_private, wakeup_work);
184 struct usb_serial_port *port = priv->port;
186 tty_wakeup(port->tty);
189 static void keyspan_pda_request_unthrottle(struct work_struct *work)
191 struct keyspan_pda_private *priv =
192 container_of(work, struct keyspan_pda_private, unthrottle_work);
193 struct usb_serial *serial = priv->serial;
196 dbg(" request_unthrottle");
197 /* ask the device to tell us when the tx buffer becomes
198 sufficiently empty */
199 result = usb_control_msg(serial->dev,
200 usb_sndctrlpipe(serial->dev, 0),
201 7, /* request_unthrottle */
202 USB_TYPE_VENDOR | USB_RECIP_INTERFACE
204 16, /* value: threshold */
210 dbg("%s - error %d from usb_control_msg",
215 static void keyspan_pda_rx_interrupt (struct urb *urb)
217 struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
218 struct tty_struct *tty = port->tty;
219 unsigned char *data = urb->transfer_buffer;
222 int status = urb->status;
223 struct keyspan_pda_private *priv;
224 priv = usb_get_serial_port_data(port);
233 /* this urb is terminated, clean up */
234 dbg("%s - urb shutting down with status: %d",
238 dbg("%s - nonzero urb status received: %d",
243 /* see if the message is data or a status interrupt */
246 /* rest of message is rx data */
247 if (urb->actual_length) {
248 for (i = 1; i < urb->actual_length ; ++i) {
249 tty_insert_flip_char(tty, data[i], 0);
251 tty_flip_buffer_push(tty);
255 /* status interrupt */
256 dbg(" rx int, d1=%d, d2=%d", data[1], data[2]);
258 case 1: /* modemline change */
260 case 2: /* tx unthrottle interrupt */
261 priv->tx_throttled = 0;
262 /* queue up a wakeup at scheduler time */
263 schedule_work(&priv->wakeup_work);
274 retval = usb_submit_urb (urb, GFP_ATOMIC);
276 err ("%s - usb_submit_urb failed with result %d",
281 static void keyspan_pda_rx_throttle (struct usb_serial_port *port)
283 /* stop receiving characters. We just turn off the URB request, and
284 let chars pile up in the device. If we're doing hardware
285 flowcontrol, the device will signal the other end when its buffer
286 fills up. If we're doing XON/XOFF, this would be a good time to
287 send an XOFF, although it might make sense to foist that off
288 upon the device too. */
290 dbg("keyspan_pda_rx_throttle port %d", port->number);
291 usb_kill_urb(port->interrupt_in_urb);
295 static void keyspan_pda_rx_unthrottle (struct usb_serial_port *port)
297 /* just restart the receive interrupt URB */
298 dbg("keyspan_pda_rx_unthrottle port %d", port->number);
299 port->interrupt_in_urb->dev = port->serial->dev;
300 if (usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC))
301 dbg(" usb_submit_urb(read urb) failed");
306 static speed_t keyspan_pda_setbaud (struct usb_serial *serial, speed_t baud)
312 case 110: bindex = 0; break;
313 case 300: bindex = 1; break;
314 case 1200: bindex = 2; break;
315 case 2400: bindex = 3; break;
316 case 4800: bindex = 4; break;
317 case 9600: bindex = 5; break;
318 case 19200: bindex = 6; break;
319 case 38400: bindex = 7; break;
320 case 57600: bindex = 8; break;
321 case 115200: bindex = 9; break;
323 bindex = 5; /* Default to 9600 */
327 /* rather than figure out how to sleep while waiting for this
328 to complete, I just use the "legacy" API. */
329 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
332 | USB_RECIP_INTERFACE
333 | USB_DIR_OUT, /* type */
345 static void keyspan_pda_break_ctl (struct usb_serial_port *port, int break_state)
347 struct usb_serial *serial = port->serial;
351 if (break_state == -1)
352 value = 1; /* start break */
354 value = 0; /* clear break */
355 result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
357 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
358 value, 0, NULL, 0, 2000);
360 dbg("%s - error %d from usb_control_msg",
362 /* there is something funky about this.. the TCSBRK that 'cu' performs
363 ought to translate into a break_ctl(-1),break_ctl(0) pair HZ/4
364 seconds apart, but it feels like the break sent isn't as long as it
369 static void keyspan_pda_set_termios (struct usb_serial_port *port,
370 struct ktermios *old_termios)
372 struct usb_serial *serial = port->serial;
375 /* cflag specifies lots of stuff: number of stop bits, parity, number
376 of data bits, baud. What can the device actually handle?:
377 CSTOPB (1 stop bit or 2)
380 There is minimal hw support for parity (a PSW bit seems to hold the
381 parity of whatever is in the accumulator). The UART either deals
382 with 10 bits (start, 8 data, stop) or 11 bits (start, 8 data,
383 1 special, stop). So, with firmware changes, we could do:
385 8N2: 11 bit, extra bit always (mark?)
386 8[EOMS]1: 11 bit, extra bit is parity
387 7[EOMS]1: 10 bit, b0/b7 is parity
388 7[EOMS]2: 11 bit, b0/b7 is parity, extra bit always (mark?)
390 HW flow control is dictated by the tty->termios->c_cflags & CRTSCTS
393 For now, just do baud. */
395 speed = tty_get_baud_rate(port->tty);
396 speed = keyspan_pda_setbaud(serial, speed);
399 dbg("can't handle requested baud rate");
400 /* It hasn't changed so.. */
401 speed = tty_termios_baud_rate(old_termios);
403 /* Only speed can change so copy the old h/w parameters
404 then encode the new speed */
405 tty_termios_copy_hw(port->tty->termios, old_termios);
406 tty_encode_baud_rate(port->tty, speed, speed);
410 /* modem control pins: DTR and RTS are outputs and can be controlled.
411 DCD, RI, DSR, CTS are inputs and can be read. All outputs can also be
412 read. The byte passed is: DTR(b7) DCD RI DSR CTS RTS(b2) unused unused */
414 static int keyspan_pda_get_modem_info(struct usb_serial *serial,
415 unsigned char *value)
419 rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
421 USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN,
422 0, 0, &data, 1, 2000);
429 static int keyspan_pda_set_modem_info(struct usb_serial *serial,
433 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
435 USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_OUT,
436 value, 0, NULL, 0, 2000);
440 static int keyspan_pda_tiocmget(struct usb_serial_port *port, struct file *file)
442 struct usb_serial *serial = port->serial;
444 unsigned char status;
447 rc = keyspan_pda_get_modem_info(serial, &status);
451 ((status & (1<<7)) ? TIOCM_DTR : 0) |
452 ((status & (1<<6)) ? TIOCM_CAR : 0) |
453 ((status & (1<<5)) ? TIOCM_RNG : 0) |
454 ((status & (1<<4)) ? TIOCM_DSR : 0) |
455 ((status & (1<<3)) ? TIOCM_CTS : 0) |
456 ((status & (1<<2)) ? TIOCM_RTS : 0);
460 static int keyspan_pda_tiocmset(struct usb_serial_port *port, struct file *file,
461 unsigned int set, unsigned int clear)
463 struct usb_serial *serial = port->serial;
465 unsigned char status;
467 rc = keyspan_pda_get_modem_info(serial, &status);
476 if (clear & TIOCM_RTS)
478 if (clear & TIOCM_DTR)
480 rc = keyspan_pda_set_modem_info(serial, status);
484 static int keyspan_pda_ioctl(struct usb_serial_port *port, struct file *file,
485 unsigned int cmd, unsigned long arg)
489 /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
492 /* return count of modemline transitions */
499 static int keyspan_pda_write(struct usb_serial_port *port,
500 const unsigned char *buf, int count)
502 struct usb_serial *serial = port->serial;
503 int request_unthrottle = 0;
505 struct keyspan_pda_private *priv;
507 priv = usb_get_serial_port_data(port);
508 /* guess how much room is left in the device's ring buffer, and if we
509 want to send more than that, check first, updating our notion of
510 what is left. If our write will result in no room left, ask the
511 device to give us an interrupt when the room available rises above
512 a threshold, and hold off all writers (eventually, those using
513 select() or poll() too) until we receive that unthrottle interrupt.
514 Block if we can't write anything at all, otherwise write as much as
516 dbg("keyspan_pda_write(%d)",count);
518 dbg(" write request of 0 bytes");
522 /* we might block because of:
523 the TX urb is in-flight (wait until it completes)
524 the device is full (wait until it says there is room)
526 spin_lock_bh(&port->lock);
527 if (port->write_urb_busy || priv->tx_throttled) {
528 spin_unlock_bh(&port->lock);
531 port->write_urb_busy = 1;
532 spin_unlock_bh(&port->lock);
534 /* At this point the URB is in our control, nobody else can submit it
535 again (the only sudden transition was the one from EINPROGRESS to
536 finished). Also, the tx process is not throttled. So we are
539 count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
541 /* Check if we might overrun the Tx buffer. If so, ask the
542 device how much room it really has. This is done only on
543 scheduler time, since usb_control_msg() sleeps. */
544 if (count > priv->tx_room && !in_interrupt()) {
546 rc = usb_control_msg(serial->dev,
547 usb_rcvctrlpipe(serial->dev, 0),
549 USB_TYPE_VENDOR | USB_RECIP_INTERFACE
551 0, /* value: 0 means "remaining room" */
557 dbg(" roomquery failed");
561 dbg(" roomquery returned 0 bytes");
562 rc = -EIO; /* device didn't return any data */
565 dbg(" roomquery says %d", room);
566 priv->tx_room = room;
568 if (count > priv->tx_room) {
569 /* we're about to completely fill the Tx buffer, so
570 we'll be throttled afterwards. */
571 count = priv->tx_room;
572 request_unthrottle = 1;
576 /* now transfer data */
577 memcpy (port->write_urb->transfer_buffer, buf, count);
578 /* send the data out the bulk port */
579 port->write_urb->transfer_buffer_length = count;
581 priv->tx_room -= count;
583 port->write_urb->dev = port->serial->dev;
584 rc = usb_submit_urb(port->write_urb, GFP_ATOMIC);
586 dbg(" usb_submit_urb(write bulk) failed");
591 /* There wasn't any room left, so we are throttled until
592 the buffer empties a bit */
593 request_unthrottle = 1;
596 if (request_unthrottle) {
597 priv->tx_throttled = 1; /* block writers */
598 schedule_work(&priv->unthrottle_work);
604 port->write_urb_busy = 0;
609 static void keyspan_pda_write_bulk_callback (struct urb *urb)
611 struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
612 struct keyspan_pda_private *priv;
614 port->write_urb_busy = 0;
615 priv = usb_get_serial_port_data(port);
617 /* queue up a wakeup at scheduler time */
618 schedule_work(&priv->wakeup_work);
622 static int keyspan_pda_write_room (struct usb_serial_port *port)
624 struct keyspan_pda_private *priv;
626 priv = usb_get_serial_port_data(port);
628 /* used by n_tty.c for processing of tabs and such. Giving it our
629 conservative guess is probably good enough, but needs testing by
630 running a console through the device. */
632 return (priv->tx_room);
636 static int keyspan_pda_chars_in_buffer (struct usb_serial_port *port)
638 struct keyspan_pda_private *priv;
642 priv = usb_get_serial_port_data(port);
644 /* when throttled, return at least WAKEUP_CHARS to tell select() (via
645 n_tty.c:normal_poll() ) that we're not writeable. */
647 spin_lock_irqsave(&port->lock, flags);
648 if (port->write_urb_busy || priv->tx_throttled)
650 spin_unlock_irqrestore(&port->lock, flags);
655 static int keyspan_pda_open (struct usb_serial_port *port, struct file *filp)
657 struct usb_serial *serial = port->serial;
660 struct keyspan_pda_private *priv;
662 /* find out how much room is in the Tx ring */
663 rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
665 USB_TYPE_VENDOR | USB_RECIP_INTERFACE
673 dbg("%s - roomquery failed", __func__);
677 dbg("%s - roomquery returned 0 bytes", __func__);
681 priv = usb_get_serial_port_data(port);
682 priv->tx_room = room;
683 priv->tx_throttled = room ? 0 : 1;
685 /* the normal serial device seems to always turn on DTR and RTS here,
687 if (port->tty->termios->c_cflag & CBAUD)
688 keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2) );
690 keyspan_pda_set_modem_info(serial, 0);
692 /*Start reading from the device*/
693 port->interrupt_in_urb->dev = serial->dev;
694 rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
696 dbg("%s - usb_submit_urb(read int) failed", __func__);
705 static void keyspan_pda_close(struct usb_serial_port *port, struct file *filp)
707 struct usb_serial *serial = port->serial;
710 /* the normal serial device seems to always shut off DTR and RTS now */
711 if (port->tty->termios->c_cflag & HUPCL)
712 keyspan_pda_set_modem_info(serial, 0);
714 /* shutdown our bulk reads and writes */
715 usb_kill_urb(port->write_urb);
716 usb_kill_urb(port->interrupt_in_urb);
721 /* download the firmware to a "fake" device (pre-renumeration) */
722 static int keyspan_pda_fake_startup (struct usb_serial *serial)
725 const struct ezusb_hex_record *record = NULL;
727 /* download the firmware here ... */
728 response = ezusb_set_reset(serial, 1);
731 if (le16_to_cpu(serial->dev->descriptor.idVendor) == KEYSPAN_VENDOR_ID)
732 record = &keyspan_pda_firmware[0];
735 if ((le16_to_cpu(serial->dev->descriptor.idVendor) == XIRCOM_VENDOR_ID) ||
736 (le16_to_cpu(serial->dev->descriptor.idVendor) == ENTREGRA_VENDOR_ID))
737 record = &xircom_pgs_firmware[0];
739 if (record == NULL) {
740 err("%s: unknown vendor, aborting.", __func__);
744 while(record->address != 0xffff) {
745 response = ezusb_writememory(serial, record->address,
746 (unsigned char *)record->data,
747 record->data_size, 0xa0);
749 err("ezusb_writememory failed for Keyspan PDA "
750 "firmware (%d %04X %p %d)",
752 record->address, record->data, record->data_size);
757 /* bring device out of reset. Renumeration will occur in a moment
758 and the new device will bind to the real driver */
759 response = ezusb_set_reset(serial, 0);
761 /* we want this device to fail to have a driver assigned to it. */
765 static int keyspan_pda_startup (struct usb_serial *serial)
768 struct keyspan_pda_private *priv;
770 /* allocate the private data structures for all ports. Well, for all
773 priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL);
775 return (1); /* error */
776 usb_set_serial_port_data(serial->port[0], priv);
777 init_waitqueue_head(&serial->port[0]->write_wait);
778 INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write);
779 INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle);
780 priv->serial = serial;
781 priv->port = serial->port[0];
785 static void keyspan_pda_shutdown (struct usb_serial *serial)
789 kfree(usb_get_serial_port_data(serial->port[0]));
793 static struct usb_serial_driver keyspan_pda_fake_device = {
795 .owner = THIS_MODULE,
796 .name = "keyspan_pda_pre",
798 .description = "Keyspan PDA - (prerenumeration)",
799 .usb_driver = &keyspan_pda_driver,
800 .id_table = id_table_fake,
802 .attach = keyspan_pda_fake_startup,
807 static struct usb_serial_driver xircom_pgs_fake_device = {
809 .owner = THIS_MODULE,
810 .name = "xircom_no_firm",
812 .description = "Xircom / Entregra PGS - (prerenumeration)",
813 .usb_driver = &keyspan_pda_driver,
814 .id_table = id_table_fake_xircom,
816 .attach = keyspan_pda_fake_startup,
820 static struct usb_serial_driver keyspan_pda_device = {
822 .owner = THIS_MODULE,
823 .name = "keyspan_pda",
825 .description = "Keyspan PDA",
826 .usb_driver = &keyspan_pda_driver,
827 .id_table = id_table_std,
829 .open = keyspan_pda_open,
830 .close = keyspan_pda_close,
831 .write = keyspan_pda_write,
832 .write_room = keyspan_pda_write_room,
833 .write_bulk_callback = keyspan_pda_write_bulk_callback,
834 .read_int_callback = keyspan_pda_rx_interrupt,
835 .chars_in_buffer = keyspan_pda_chars_in_buffer,
836 .throttle = keyspan_pda_rx_throttle,
837 .unthrottle = keyspan_pda_rx_unthrottle,
838 .ioctl = keyspan_pda_ioctl,
839 .set_termios = keyspan_pda_set_termios,
840 .break_ctl = keyspan_pda_break_ctl,
841 .tiocmget = keyspan_pda_tiocmget,
842 .tiocmset = keyspan_pda_tiocmset,
843 .attach = keyspan_pda_startup,
844 .shutdown = keyspan_pda_shutdown,
848 static int __init keyspan_pda_init (void)
851 retval = usb_serial_register(&keyspan_pda_device);
853 goto failed_pda_register;
855 retval = usb_serial_register(&keyspan_pda_fake_device);
857 goto failed_pda_fake_register;
860 retval = usb_serial_register(&xircom_pgs_fake_device);
862 goto failed_xircom_register;
864 retval = usb_register(&keyspan_pda_driver);
866 goto failed_usb_register;
867 info(DRIVER_DESC " " DRIVER_VERSION);
871 usb_serial_deregister(&xircom_pgs_fake_device);
872 failed_xircom_register:
875 usb_serial_deregister(&keyspan_pda_fake_device);
878 failed_pda_fake_register:
880 usb_serial_deregister(&keyspan_pda_device);
886 static void __exit keyspan_pda_exit (void)
888 usb_deregister (&keyspan_pda_driver);
889 usb_serial_deregister (&keyspan_pda_device);
891 usb_serial_deregister (&keyspan_pda_fake_device);
894 usb_serial_deregister (&xircom_pgs_fake_device);
899 module_init(keyspan_pda_init);
900 module_exit(keyspan_pda_exit);
902 MODULE_AUTHOR( DRIVER_AUTHOR );
903 MODULE_DESCRIPTION( DRIVER_DESC );
904 MODULE_LICENSE("GPL");
906 module_param(debug, bool, S_IRUGO | S_IWUSR);
907 MODULE_PARM_DESC(debug, "Debug enabled or not");