2 * USB Cypress M8 driver
5 * Lonnie Mendez (dignome@gmail.com)
6 * Copyright (C) 2003,2004
7 * Neil Whelchel (koyama@firstlight.net)
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * See Documentation/usb/usb-serial.txt for more information on using this driver
16 * See http://geocities.com/i0xox0i for information on this driver and the
17 * earthmate usb device.
19 * Lonnie Mendez <dignome@gmail.com>
21 * Fixed problem where setting or retreiving the serial config would fail with
22 * EPIPE. Removed CRTS toggling so the driver behaves more like other usbserial
23 * adapters. Issued new interval of 1ms instead of the default 10ms. As a
24 * result, transfer speed has been substantially increased. From avg. 850bps to
25 * avg. 3300bps. initial termios has also been modified. Cleaned up code and
26 * formatting issues so it is more readable. Replaced the C++ style comments.
28 * Lonnie Mendez <dignome@gmail.com>
30 * Incorporated write buffering from pl2303 driver. Fixed bug with line
31 * handling so both lines are raised in cypress_open. (was dropping rts)
32 * Various code cleanups made as well along with other misc bug fixes.
34 * Lonnie Mendez <dignome@gmail.com>
36 * Driver modified to support dynamic line settings. Various improvments
41 * Driver first released.
45 /* Thanks to Neil Whelchel for writing the first cypress m8 implementation for linux. */
46 /* Thanks to cypress for providing references for the hid reports. */
47 /* Thanks to Jiang Zhang for providing links and for general help. */
48 /* Code originates and was built up from ftdi_sio, belkin, pl2303 and others. */
51 #include <linux/kernel.h>
52 #include <linux/errno.h>
53 #include <linux/init.h>
54 #include <linux/slab.h>
55 #include <linux/tty.h>
56 #include <linux/tty_driver.h>
57 #include <linux/tty_flip.h>
58 #include <linux/module.h>
59 #include <linux/moduleparam.h>
60 #include <linux/spinlock.h>
61 #include <linux/usb.h>
62 #include <linux/usb/serial.h>
63 #include <linux/serial.h>
64 #include <linux/delay.h>
65 #include <asm/uaccess.h>
67 #include "cypress_m8.h"
70 #ifdef CONFIG_USB_SERIAL_DEBUG
81 #define DRIVER_VERSION "v1.09"
82 #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
83 #define DRIVER_DESC "Cypress USB to Serial Driver"
85 /* write buffer size defines */
86 #define CYPRESS_BUF_SIZE 1024
87 #define CYPRESS_CLOSING_WAIT (30*HZ)
89 static struct usb_device_id id_table_earthmate [] = {
90 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
91 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
92 { } /* Terminating entry */
95 static struct usb_device_id id_table_cyphidcomrs232 [] = {
96 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
97 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
98 { } /* Terminating entry */
101 static struct usb_device_id id_table_nokiaca42v2 [] = {
102 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
103 { } /* Terminating entry */
106 static struct usb_device_id id_table_combined [] = {
107 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
108 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
109 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
110 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
111 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
112 { } /* Terminating entry */
115 MODULE_DEVICE_TABLE (usb, id_table_combined);
117 static struct usb_driver cypress_driver = {
119 .probe = usb_serial_probe,
120 .disconnect = usb_serial_disconnect,
121 .id_table = id_table_combined,
126 packet_format_1, /* b0:status, b1:payload count */
127 packet_format_2 /* b0[7:3]:status, b0[2:0]:payload count */
130 struct cypress_private {
131 spinlock_t lock; /* private lock */
132 int chiptype; /* identifier of device, for quirks/etc */
133 int bytes_in; /* used for statistics */
134 int bytes_out; /* used for statistics */
135 int cmd_count; /* used for statistics */
136 int cmd_ctrl; /* always set this to 1 before issuing a command */
137 struct cypress_buf *buf; /* write buffer */
138 int write_urb_in_use; /* write urb in use indicator */
139 int write_urb_interval; /* interval to use for write urb */
140 int read_urb_interval; /* interval to use for read urb */
141 int comm_is_ok; /* true if communication is (still) ok */
142 int termios_initialized;
143 __u8 line_control; /* holds dtr / rts value */
144 __u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */
145 __u8 current_config; /* stores the current configuration byte */
146 __u8 rx_flags; /* throttling - used from whiteheat/ftdi_sio */
147 enum packet_format pkt_fmt; /* format to use for packet send / receive */
148 int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */
149 int baud_rate; /* stores current baud rate in integer form */
150 int isthrottled; /* if throttled, discard reads */
151 wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */
152 char prev_status, diff_status; /* used for TIOCMIWAIT */
153 /* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
154 struct ktermios tmp_termios; /* stores the old termios settings */
157 /* write buffer structure */
159 unsigned int buf_size;
165 /* function prototypes for the Cypress USB to serial device */
166 static int cypress_earthmate_startup (struct usb_serial *serial);
167 static int cypress_hidcom_startup (struct usb_serial *serial);
168 static int cypress_ca42v2_startup (struct usb_serial *serial);
169 static void cypress_shutdown (struct usb_serial *serial);
170 static int cypress_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
171 static void cypress_close (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
172 static int cypress_write (struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
173 static void cypress_send (struct usb_serial_port *port);
174 static int cypress_write_room (struct tty_struct *tty);
175 static int cypress_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
176 static void cypress_set_termios (struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
177 static int cypress_tiocmget (struct tty_struct *tty, struct file *file);
178 static int cypress_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
179 static int cypress_chars_in_buffer (struct tty_struct *tty);
180 static void cypress_throttle (struct tty_struct *tty);
181 static void cypress_unthrottle (struct tty_struct *tty);
182 static void cypress_set_dead (struct usb_serial_port *port);
183 static void cypress_read_int_callback (struct urb *urb);
184 static void cypress_write_int_callback (struct urb *urb);
185 /* write buffer functions */
186 static struct cypress_buf *cypress_buf_alloc(unsigned int size);
187 static void cypress_buf_free(struct cypress_buf *cb);
188 static void cypress_buf_clear(struct cypress_buf *cb);
189 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb);
190 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb);
191 static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf, unsigned int count);
192 static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count);
195 static struct usb_serial_driver cypress_earthmate_device = {
197 .owner = THIS_MODULE,
200 .description = "DeLorme Earthmate USB",
201 .usb_driver = &cypress_driver,
202 .id_table = id_table_earthmate,
204 .attach = cypress_earthmate_startup,
205 .shutdown = cypress_shutdown,
206 .open = cypress_open,
207 .close = cypress_close,
208 .write = cypress_write,
209 .write_room = cypress_write_room,
210 .ioctl = cypress_ioctl,
211 .set_termios = cypress_set_termios,
212 .tiocmget = cypress_tiocmget,
213 .tiocmset = cypress_tiocmset,
214 .chars_in_buffer = cypress_chars_in_buffer,
215 .throttle = cypress_throttle,
216 .unthrottle = cypress_unthrottle,
217 .read_int_callback = cypress_read_int_callback,
218 .write_int_callback = cypress_write_int_callback,
221 static struct usb_serial_driver cypress_hidcom_device = {
223 .owner = THIS_MODULE,
226 .description = "HID->COM RS232 Adapter",
227 .usb_driver = &cypress_driver,
228 .id_table = id_table_cyphidcomrs232,
230 .attach = cypress_hidcom_startup,
231 .shutdown = cypress_shutdown,
232 .open = cypress_open,
233 .close = cypress_close,
234 .write = cypress_write,
235 .write_room = cypress_write_room,
236 .ioctl = cypress_ioctl,
237 .set_termios = cypress_set_termios,
238 .tiocmget = cypress_tiocmget,
239 .tiocmset = cypress_tiocmset,
240 .chars_in_buffer = cypress_chars_in_buffer,
241 .throttle = cypress_throttle,
242 .unthrottle = cypress_unthrottle,
243 .read_int_callback = cypress_read_int_callback,
244 .write_int_callback = cypress_write_int_callback,
247 static struct usb_serial_driver cypress_ca42v2_device = {
249 .owner = THIS_MODULE,
250 .name = "nokiaca42v2",
252 .description = "Nokia CA-42 V2 Adapter",
253 .usb_driver = &cypress_driver,
254 .id_table = id_table_nokiaca42v2,
256 .attach = cypress_ca42v2_startup,
257 .shutdown = cypress_shutdown,
258 .open = cypress_open,
259 .close = cypress_close,
260 .write = cypress_write,
261 .write_room = cypress_write_room,
262 .ioctl = cypress_ioctl,
263 .set_termios = cypress_set_termios,
264 .tiocmget = cypress_tiocmget,
265 .tiocmset = cypress_tiocmset,
266 .chars_in_buffer = cypress_chars_in_buffer,
267 .throttle = cypress_throttle,
268 .unthrottle = cypress_unthrottle,
269 .read_int_callback = cypress_read_int_callback,
270 .write_int_callback = cypress_write_int_callback,
273 /*****************************************************************************
274 * Cypress serial helper functions
275 *****************************************************************************/
278 static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
280 struct cypress_private *priv;
281 priv = usb_get_serial_port_data(port);
284 * The general purpose firmware for the Cypress M8 allows for
285 * a maximum speed of 57600bps (I have no idea whether DeLorme
286 * chose to use the general purpose firmware or not), if you
287 * need to modify this speed setting for your own project
288 * please add your own chiptype and modify the code likewise.
289 * The Cypress HID->COM device will work successfully up to
290 * 115200bps (but the actual throughput is around 3kBps).
292 if (port->serial->dev->speed == USB_SPEED_LOW) {
294 * Mike Isely <isely@pobox.com> 2-Feb-2008: The
295 * Cypress app note that describes this mechanism
296 * states the the low-speed part can't handle more
297 * than 800 bytes/sec, in which case 4800 baud is the
298 * safest speed for a part like that.
300 if (new_rate > 4800) {
301 dbg("%s - failed setting baud rate, device incapable "
302 "speed %d", __func__, new_rate);
306 switch (priv->chiptype) {
308 if (new_rate <= 600) {
309 /* 300 and 600 baud rates are supported under
310 * the generic firmware, but are not used with
311 * NMEA and SiRF protocols */
312 dbg("%s - failed setting baud rate, unsupported speed "
313 "of %d on Earthmate GPS", __func__, new_rate);
324 /* This function can either set or retrieve the current serial line settings */
325 static int cypress_serial_control (struct tty_struct *tty,
326 struct usb_serial_port *port, speed_t baud_rate, int data_bits,
327 int stop_bits, int parity_enable, int parity_type, int reset,
328 int cypress_request_type)
330 int new_baudrate = 0, retval = 0, tries = 0;
331 struct cypress_private *priv;
332 __u8 feature_buffer[5];
337 priv = usb_get_serial_port_data(port);
339 if (!priv->comm_is_ok)
342 switch(cypress_request_type) {
343 case CYPRESS_SET_CONFIG:
344 new_baudrate = priv->baud_rate;
345 /* 0 means 'Hang up' so doesn't change the true bit rate */
347 new_baudrate = priv->baud_rate;
348 /* Change of speed ? */
349 else if (baud_rate != priv->baud_rate) {
350 dbg("%s - baud rate is changing", __func__);
351 retval = analyze_baud_rate(port, baud_rate);
353 new_baudrate = retval;
354 dbg("%s - New baud rate set to %d",
355 __func__, new_baudrate);
358 dbg("%s - baud rate is being sent as %d", __func__, new_baudrate);
360 memset(feature_buffer, 0, sizeof(feature_buffer));
361 /* fill the feature_buffer with new configuration */
362 *((u_int32_t *)feature_buffer) = new_baudrate;
364 feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */
366 feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */
367 feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */
368 feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */
370 feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */
372 dbg("%s - device is being sent this feature report:", __func__);
373 dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__, feature_buffer[0], feature_buffer[1],
374 feature_buffer[2], feature_buffer[3], feature_buffer[4]);
377 retval = usb_control_msg(port->serial->dev,
378 usb_sndctrlpipe(port->serial->dev, 0),
380 USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
381 0x0300, 0, feature_buffer,
382 sizeof(feature_buffer), 500);
387 } while (retval != sizeof(feature_buffer) &&
390 if (retval != sizeof(feature_buffer)) {
391 err("%s - failed sending serial line settings - %d", __func__, retval);
392 cypress_set_dead(port);
394 spin_lock_irqsave(&priv->lock, flags);
395 priv->baud_rate = new_baudrate;
396 priv->current_config = feature_buffer[4];
397 spin_unlock_irqrestore(&priv->lock, flags);
398 /* If we asked for a speed change encode it */
400 tty_encode_baud_rate(tty,
401 new_baudrate, new_baudrate);
404 case CYPRESS_GET_CONFIG:
405 if (priv->get_cfg_unsafe) {
406 /* Not implemented for this device,
407 and if we try to do it we're likely
408 to crash the hardware. */
411 dbg("%s - retreiving serial line settings", __func__);
412 /* set initial values in feature buffer */
413 memset(feature_buffer, 0, sizeof(feature_buffer));
416 retval = usb_control_msg(port->serial->dev,
417 usb_rcvctrlpipe(port->serial->dev, 0),
419 USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
420 0x0300, 0, feature_buffer,
421 sizeof(feature_buffer), 500);
426 } while (retval != sizeof(feature_buffer) &&
429 if (retval != sizeof(feature_buffer)) {
430 err("%s - failed to retrieve serial line settings - %d", __func__, retval);
431 cypress_set_dead(port);
434 spin_lock_irqsave(&priv->lock, flags);
436 /* store the config in one byte, and later use bit masks to check values */
437 priv->current_config = feature_buffer[4];
438 priv->baud_rate = *((u_int32_t *)feature_buffer);
439 spin_unlock_irqrestore(&priv->lock, flags);
442 spin_lock_irqsave(&priv->lock, flags);
444 spin_unlock_irqrestore(&priv->lock, flags);
447 } /* cypress_serial_control */
450 static void cypress_set_dead(struct usb_serial_port *port)
452 struct cypress_private *priv = usb_get_serial_port_data(port);
455 spin_lock_irqsave(&priv->lock, flags);
456 if (!priv->comm_is_ok) {
457 spin_unlock_irqrestore(&priv->lock, flags);
460 priv->comm_is_ok = 0;
461 spin_unlock_irqrestore(&priv->lock, flags);
463 err("cypress_m8 suspending failing port %d - interval might be too short",
468 /*****************************************************************************
469 * Cypress serial driver functions
470 *****************************************************************************/
473 static int generic_startup (struct usb_serial *serial)
475 struct cypress_private *priv;
476 struct usb_serial_port *port = serial->port[0];
478 dbg("%s - port %d", __func__, port->number);
480 priv = kzalloc(sizeof (struct cypress_private), GFP_KERNEL);
484 priv->comm_is_ok = !0;
485 spin_lock_init(&priv->lock);
486 priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE);
487 if (priv->buf == NULL) {
491 init_waitqueue_head(&priv->delta_msr_wait);
493 usb_reset_configuration (serial->dev);
496 priv->line_control = 0;
497 priv->termios_initialized = 0;
499 /* Default packet format setting is determined by packet size.
500 Anything with a size larger then 9 must have a separate
501 count field since the 3 bit count field is otherwise too
502 small. Otherwise we can use the slightly more compact
503 format. This is in accordance with the cypress_m8 serial
504 converter app note. */
505 if (port->interrupt_out_size > 9) {
506 priv->pkt_fmt = packet_format_1;
508 priv->pkt_fmt = packet_format_2;
511 priv->write_urb_interval = interval;
512 priv->read_urb_interval = interval;
513 dbg("%s - port %d read & write intervals forced to %d",
514 __func__,port->number,interval);
516 priv->write_urb_interval = port->interrupt_out_urb->interval;
517 priv->read_urb_interval = port->interrupt_in_urb->interval;
518 dbg("%s - port %d intervals: read=%d write=%d",
519 __func__,port->number,
520 priv->read_urb_interval,priv->write_urb_interval);
522 usb_set_serial_port_data(port, priv);
528 static int cypress_earthmate_startup (struct usb_serial *serial)
530 struct cypress_private *priv;
531 struct usb_serial_port *port = serial->port[0];
535 if (generic_startup(serial)) {
536 dbg("%s - Failed setting up port %d", __func__,
541 priv = usb_get_serial_port_data(port);
542 priv->chiptype = CT_EARTHMATE;
543 /* All Earthmate devices use the separated-count packet
545 priv->pkt_fmt = packet_format_1;
546 if (serial->dev->descriptor.idProduct != cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
547 /* The old original USB Earthmate seemed able to
548 handle GET_CONFIG requests; everything they've
549 produced since that time crashes if this command is
551 dbg("%s - Marking this device as unsafe for GET_CONFIG "
552 "commands", __func__);
553 priv->get_cfg_unsafe = !0;
557 } /* cypress_earthmate_startup */
560 static int cypress_hidcom_startup (struct usb_serial *serial)
562 struct cypress_private *priv;
566 if (generic_startup(serial)) {
567 dbg("%s - Failed setting up port %d", __func__,
568 serial->port[0]->number);
572 priv = usb_get_serial_port_data(serial->port[0]);
573 priv->chiptype = CT_CYPHIDCOM;
576 } /* cypress_hidcom_startup */
579 static int cypress_ca42v2_startup (struct usb_serial *serial)
581 struct cypress_private *priv;
585 if (generic_startup(serial)) {
586 dbg("%s - Failed setting up port %d", __func__,
587 serial->port[0]->number);
591 priv = usb_get_serial_port_data(serial->port[0]);
592 priv->chiptype = CT_CA42V2;
595 } /* cypress_ca42v2_startup */
598 static void cypress_shutdown (struct usb_serial *serial)
600 struct cypress_private *priv;
602 dbg ("%s - port %d", __func__, serial->port[0]->number);
604 /* all open ports are closed at this point */
606 priv = usb_get_serial_port_data(serial->port[0]);
609 cypress_buf_free(priv->buf);
611 usb_set_serial_port_data(serial->port[0], NULL);
616 static int cypress_open(struct tty_struct *tty,
617 struct usb_serial_port *port, struct file *filp)
619 struct cypress_private *priv = usb_get_serial_port_data(port);
620 struct usb_serial *serial = port->serial;
624 dbg("%s - port %d", __func__, port->number);
626 if (!priv->comm_is_ok)
629 /* clear halts before open */
630 usb_clear_halt(serial->dev, 0x81);
631 usb_clear_halt(serial->dev, 0x02);
633 spin_lock_irqsave(&priv->lock, flags);
634 /* reset read/write statistics */
639 spin_unlock_irqrestore(&priv->lock, flags);
641 /* setting to zero could cause data loss */
643 tty->low_latency = 1;
645 /* raise both lines and set termios */
646 spin_lock_irqsave(&priv->lock, flags);
647 priv->line_control = CONTROL_DTR | CONTROL_RTS;
649 spin_unlock_irqrestore(&priv->lock, flags);
650 result = cypress_write(tty, port, NULL, 0);
653 dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __func__, result);
656 dbg("%s - success setting the control lines", __func__);
659 cypress_set_termios(tty, port, &priv->tmp_termios);
661 /* setup the port and start reading from the device */
662 if(!port->interrupt_in_urb){
663 err("%s - interrupt_in_urb is empty!", __func__);
667 usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
668 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
669 port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length,
670 cypress_read_int_callback, port, priv->read_urb_interval);
671 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
674 dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
675 cypress_set_dead(port);
682 static void cypress_close(struct tty_struct *tty,
683 struct usb_serial_port *port, struct file * filp)
685 struct cypress_private *priv = usb_get_serial_port_data(port);
686 unsigned int c_cflag;
691 dbg("%s - port %d", __func__, port->number);
693 /* wait for data to drain from buffer */
694 spin_lock_irq(&priv->lock);
695 timeout = CYPRESS_CLOSING_WAIT;
696 init_waitqueue_entry(&wait, current);
697 add_wait_queue(&tty->write_wait, &wait);
699 set_current_state(TASK_INTERRUPTIBLE);
700 if (cypress_buf_data_avail(priv->buf) == 0
701 || timeout == 0 || signal_pending(current)
702 /* without mutex, allowed due to harmless failure mode */
703 || port->serial->disconnected)
705 spin_unlock_irq(&priv->lock);
706 timeout = schedule_timeout(timeout);
707 spin_lock_irq(&priv->lock);
709 set_current_state(TASK_RUNNING);
710 remove_wait_queue(&tty->write_wait, &wait);
711 /* clear out any remaining data in the buffer */
712 cypress_buf_clear(priv->buf);
713 spin_unlock_irq(&priv->lock);
715 /* writing is potentially harmful, lock must be taken */
716 mutex_lock(&port->serial->disc_mutex);
717 if (port->serial->disconnected) {
718 mutex_unlock(&port->serial->disc_mutex);
721 /* wait for characters to drain from device */
723 bps = tty_get_baud_rate(tty);
725 timeout = max((HZ*2560)/bps,HZ/10);
728 schedule_timeout_interruptible(timeout);
731 dbg("%s - stopping urbs", __func__);
732 usb_kill_urb (port->interrupt_in_urb);
733 usb_kill_urb (port->interrupt_out_urb);
736 c_cflag = tty->termios->c_cflag;
737 if (c_cflag & HUPCL) {
738 /* drop dtr and rts */
739 priv = usb_get_serial_port_data(port);
740 spin_lock_irq(&priv->lock);
741 priv->line_control = 0;
743 spin_unlock_irq(&priv->lock);
744 cypress_write(tty, port, NULL, 0);
749 dev_info (&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
750 priv->bytes_in, priv->bytes_out, priv->cmd_count);
751 mutex_unlock(&port->serial->disc_mutex);
752 } /* cypress_close */
755 static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
756 const unsigned char *buf, int count)
758 struct cypress_private *priv = usb_get_serial_port_data(port);
761 dbg("%s - port %d, %d bytes", __func__, port->number, count);
763 /* line control commands, which need to be executed immediately,
764 are not put into the buffer for obvious reasons.
766 if (priv->cmd_ctrl) {
774 spin_lock_irqsave(&priv->lock, flags);
775 count = cypress_buf_put(priv->buf, buf, count);
776 spin_unlock_irqrestore(&priv->lock, flags);
782 } /* cypress_write */
785 static void cypress_send(struct usb_serial_port *port)
787 int count = 0, result, offset, actual_size;
788 struct cypress_private *priv = usb_get_serial_port_data(port);
791 if (!priv->comm_is_ok)
794 dbg("%s - port %d", __func__, port->number);
795 dbg("%s - interrupt out size is %d", __func__, port->interrupt_out_size);
797 spin_lock_irqsave(&priv->lock, flags);
798 if (priv->write_urb_in_use) {
799 dbg("%s - can't write, urb in use", __func__);
800 spin_unlock_irqrestore(&priv->lock, flags);
803 spin_unlock_irqrestore(&priv->lock, flags);
806 memset(port->interrupt_out_urb->transfer_buffer, 0, port->interrupt_out_size);
808 spin_lock_irqsave(&priv->lock, flags);
809 switch (priv->pkt_fmt) {
811 case packet_format_1:
812 /* this is for the CY7C64013... */
814 port->interrupt_out_buffer[0] = priv->line_control;
816 case packet_format_2:
817 /* this is for the CY7C63743... */
819 port->interrupt_out_buffer[0] = priv->line_control;
823 if (priv->line_control & CONTROL_RESET)
824 priv->line_control &= ~CONTROL_RESET;
826 if (priv->cmd_ctrl) {
828 dbg("%s - line control command being issued", __func__);
829 spin_unlock_irqrestore(&priv->lock, flags);
832 spin_unlock_irqrestore(&priv->lock, flags);
834 count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
835 port->interrupt_out_size-offset);
841 switch (priv->pkt_fmt) {
843 case packet_format_1:
844 port->interrupt_out_buffer[1] = count;
846 case packet_format_2:
847 port->interrupt_out_buffer[0] |= count;
850 dbg("%s - count is %d", __func__, count);
853 spin_lock_irqsave(&priv->lock, flags);
854 priv->write_urb_in_use = 1;
855 spin_unlock_irqrestore(&priv->lock, flags);
860 actual_size = count +
861 (priv->pkt_fmt == packet_format_1 ? 2 : 1);
863 usb_serial_debug_data(debug, &port->dev, __func__, port->interrupt_out_size,
864 port->interrupt_out_urb->transfer_buffer);
866 usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
867 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
868 port->interrupt_out_buffer, port->interrupt_out_size,
869 cypress_write_int_callback, port, priv->write_urb_interval);
870 result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC);
872 dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__,
874 priv->write_urb_in_use = 0;
875 cypress_set_dead(port);
878 spin_lock_irqsave(&priv->lock, flags);
879 if (priv->cmd_ctrl) {
882 priv->bytes_out += count; /* do not count the line control and size bytes */
883 spin_unlock_irqrestore(&priv->lock, flags);
885 usb_serial_port_softint(port);
889 /* returns how much space is available in the soft buffer */
890 static int cypress_write_room(struct tty_struct *tty)
892 struct usb_serial_port *port = tty->driver_data;
893 struct cypress_private *priv = usb_get_serial_port_data(port);
897 dbg("%s - port %d", __func__, port->number);
899 spin_lock_irqsave(&priv->lock, flags);
900 room = cypress_buf_space_avail(priv->buf);
901 spin_unlock_irqrestore(&priv->lock, flags);
903 dbg("%s - returns %d", __func__, room);
908 static int cypress_tiocmget(struct tty_struct *tty, struct file *file)
910 struct usb_serial_port *port = tty->driver_data;
911 struct cypress_private *priv = usb_get_serial_port_data(port);
912 __u8 status, control;
913 unsigned int result = 0;
916 dbg("%s - port %d", __func__, port->number);
918 spin_lock_irqsave(&priv->lock, flags);
919 control = priv->line_control;
920 status = priv->current_status;
921 spin_unlock_irqrestore(&priv->lock, flags);
923 result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
924 | ((control & CONTROL_RTS) ? TIOCM_RTS : 0)
925 | ((status & UART_CTS) ? TIOCM_CTS : 0)
926 | ((status & UART_DSR) ? TIOCM_DSR : 0)
927 | ((status & UART_RI) ? TIOCM_RI : 0)
928 | ((status & UART_CD) ? TIOCM_CD : 0);
930 dbg("%s - result = %x", __func__, result);
936 static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
937 unsigned int set, unsigned int clear)
939 struct usb_serial_port *port = tty->driver_data;
940 struct cypress_private *priv = usb_get_serial_port_data(port);
943 dbg("%s - port %d", __func__, port->number);
945 spin_lock_irqsave(&priv->lock, flags);
947 priv->line_control |= CONTROL_RTS;
949 priv->line_control |= CONTROL_DTR;
950 if (clear & TIOCM_RTS)
951 priv->line_control &= ~CONTROL_RTS;
952 if (clear & TIOCM_DTR)
953 priv->line_control &= ~CONTROL_DTR;
955 spin_unlock_irqrestore(&priv->lock, flags);
957 return cypress_write(tty, port, NULL, 0);
961 static int cypress_ioctl(struct tty_struct *tty, struct file * file,
962 unsigned int cmd, unsigned long arg)
964 struct usb_serial_port *port = tty->driver_data;
965 struct cypress_private *priv = usb_get_serial_port_data(port);
967 dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
970 /* This code comes from drivers/char/serial.c and ftdi_sio.c */
972 while (priv != NULL) {
973 interruptible_sleep_on(&priv->delta_msr_wait);
974 /* see if a signal did it */
975 if (signal_pending(current))
978 char diff = priv->diff_status;
981 return -EIO; /* no change => error */
984 /* consume all events */
985 priv->diff_status = 0;
987 /* return 0 if caller wanted to know about these bits */
988 if ( ((arg & TIOCM_RNG) && (diff & UART_RI)) ||
989 ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
990 ((arg & TIOCM_CD) && (diff & UART_CD)) ||
991 ((arg & TIOCM_CTS) && (diff & UART_CTS)) ) {
994 /* otherwise caller can't care less about what happened,
995 * and so we continue to wait for more events.
1003 dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __func__, cmd);
1004 return -ENOIOCTLCMD;
1005 } /* cypress_ioctl */
1008 static void cypress_set_termios(struct tty_struct *tty,
1009 struct usb_serial_port *port, struct ktermios *old_termios)
1011 struct cypress_private *priv = usb_get_serial_port_data(port);
1012 int data_bits, stop_bits, parity_type, parity_enable;
1013 unsigned cflag, iflag;
1014 unsigned long flags;
1018 dbg("%s - port %d", __func__, port->number);
1020 spin_lock_irqsave(&priv->lock, flags);
1021 if (!priv->termios_initialized) {
1022 if (priv->chiptype == CT_EARTHMATE) {
1023 *(tty->termios) = tty_std_termios;
1024 tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
1026 tty->termios->c_ispeed = 4800;
1027 tty->termios->c_ospeed = 4800;
1028 } else if (priv->chiptype == CT_CYPHIDCOM) {
1029 *(tty->termios) = tty_std_termios;
1030 tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1032 tty->termios->c_ispeed = 9600;
1033 tty->termios->c_ospeed = 9600;
1034 } else if (priv->chiptype == CT_CA42V2) {
1035 *(tty->termios) = tty_std_termios;
1036 tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
1038 tty->termios->c_ispeed = 9600;
1039 tty->termios->c_ospeed = 9600;
1041 priv->termios_initialized = 1;
1043 spin_unlock_irqrestore(&priv->lock, flags);
1045 /* Unsupported features need clearing */
1046 tty->termios->c_cflag &= ~(CMSPAR|CRTSCTS);
1048 cflag = tty->termios->c_cflag;
1049 iflag = tty->termios->c_iflag;
1051 /* check if there are new settings */
1053 spin_lock_irqsave(&priv->lock, flags);
1054 priv->tmp_termios = *(tty->termios);
1055 spin_unlock_irqrestore(&priv->lock, flags);
1058 /* set number of data bits, parity, stop bits */
1059 /* when parity is disabled the parity type bit is ignored */
1061 /* 1 means 2 stop bits, 0 means 1 stop bit */
1062 stop_bits = cflag & CSTOPB ? 1 : 0;
1064 if (cflag & PARENB) {
1066 /* 1 means odd parity, 0 means even parity */
1067 parity_type = cflag & PARODD ? 1 : 0;
1069 parity_enable = parity_type = 0;
1071 if (cflag & CSIZE) {
1072 switch (cflag & CSIZE) {
1086 err("%s - CSIZE was set, but not CS5-CS8",
1093 spin_lock_irqsave(&priv->lock, flags);
1094 oldlines = priv->line_control;
1095 if ((cflag & CBAUD) == B0) {
1096 /* drop dtr and rts */
1097 dbg("%s - dropping the lines, baud rate 0bps", __func__);
1098 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
1100 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
1101 spin_unlock_irqrestore(&priv->lock, flags);
1103 dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
1104 "%d data_bits (+5)", __func__, stop_bits,
1105 parity_enable, parity_type, data_bits);
1107 cypress_serial_control(tty, port, tty_get_baud_rate(tty), data_bits, stop_bits,
1108 parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);
1110 /* we perform a CYPRESS_GET_CONFIG so that the current settings are
1111 * filled into the private structure this should confirm that all is
1112 * working if it returns what we just set */
1113 cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
1115 /* Here we can define custom tty settings for devices; the main tty
1116 * termios flag base comes from empeg.c */
1118 spin_lock_irqsave(&priv->lock, flags);
1119 if ( (priv->chiptype == CT_EARTHMATE) && (priv->baud_rate == 4800) ) {
1120 dbg("Using custom termios settings for a baud rate of "
1122 /* define custom termios settings for NMEA protocol */
1124 tty->termios->c_iflag /* input modes - */
1125 &= ~(IGNBRK /* disable ignore break */
1126 | BRKINT /* disable break causes interrupt */
1127 | PARMRK /* disable mark parity errors */
1128 | ISTRIP /* disable clear high bit of input char */
1129 | INLCR /* disable translate NL to CR */
1130 | IGNCR /* disable ignore CR */
1131 | ICRNL /* disable translate CR to NL */
1132 | IXON); /* disable enable XON/XOFF flow control */
1134 tty->termios->c_oflag /* output modes */
1135 &= ~OPOST; /* disable postprocess output char */
1137 tty->termios->c_lflag /* line discipline modes */
1138 &= ~(ECHO /* disable echo input characters */
1139 | ECHONL /* disable echo new line */
1140 | ICANON /* disable erase, kill, werase, and rprnt
1141 special characters */
1142 | ISIG /* disable interrupt, quit, and suspend
1143 special characters */
1144 | IEXTEN); /* disable non-POSIX special characters */
1145 } /* CT_CYPHIDCOM: Application should handle this for device */
1147 linechange = (priv->line_control != oldlines);
1148 spin_unlock_irqrestore(&priv->lock, flags);
1150 /* if necessary, set lines */
1153 cypress_write(tty, port, NULL, 0);
1155 } /* cypress_set_termios */
1158 /* returns amount of data still left in soft buffer */
1159 static int cypress_chars_in_buffer(struct tty_struct *tty)
1161 struct usb_serial_port *port = tty->driver_data;
1162 struct cypress_private *priv = usb_get_serial_port_data(port);
1164 unsigned long flags;
1166 dbg("%s - port %d", __func__, port->number);
1168 spin_lock_irqsave(&priv->lock, flags);
1169 chars = cypress_buf_data_avail(priv->buf);
1170 spin_unlock_irqrestore(&priv->lock, flags);
1172 dbg("%s - returns %d", __func__, chars);
1177 static void cypress_throttle(struct tty_struct *tty)
1179 struct usb_serial_port *port = tty->driver_data;
1180 struct cypress_private *priv = usb_get_serial_port_data(port);
1181 unsigned long flags;
1183 dbg("%s - port %d", __func__, port->number);
1185 spin_lock_irqsave(&priv->lock, flags);
1186 priv->rx_flags = THROTTLED;
1187 spin_unlock_irqrestore(&priv->lock, flags);
1191 static void cypress_unthrottle(struct tty_struct *tty)
1193 struct usb_serial_port *port = tty->driver_data;
1194 struct cypress_private *priv = usb_get_serial_port_data(port);
1195 int actually_throttled, result;
1196 unsigned long flags;
1198 dbg("%s - port %d", __func__, port->number);
1200 spin_lock_irqsave(&priv->lock, flags);
1201 actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1203 spin_unlock_irqrestore(&priv->lock, flags);
1205 if (!priv->comm_is_ok)
1208 if (actually_throttled) {
1209 port->interrupt_in_urb->dev = port->serial->dev;
1211 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1213 dev_err(&port->dev, "%s - failed submitting read urb, "
1214 "error %d\n", __func__, result);
1215 cypress_set_dead(port);
1221 static void cypress_read_int_callback(struct urb *urb)
1223 struct usb_serial_port *port = urb->context;
1224 struct cypress_private *priv = usb_get_serial_port_data(port);
1225 struct tty_struct *tty;
1226 unsigned char *data = urb->transfer_buffer;
1227 unsigned long flags;
1228 char tty_flag = TTY_NORMAL;
1233 int status = urb->status;
1235 dbg("%s - port %d", __func__, port->number);
1238 case 0: /* success */
1243 /* precursor to disconnect so just go away */
1246 usb_clear_halt(port->serial->dev,0x81);
1249 /* something ugly is going on... */
1250 dev_err(&urb->dev->dev,"%s - unexpected nonzero read status received: %d\n",
1252 cypress_set_dead(port);
1256 spin_lock_irqsave(&priv->lock, flags);
1257 if (priv->rx_flags & THROTTLED) {
1258 dbg("%s - now throttling", __func__);
1259 priv->rx_flags |= ACTUALLY_THROTTLED;
1260 spin_unlock_irqrestore(&priv->lock, flags);
1263 spin_unlock_irqrestore(&priv->lock, flags);
1265 tty = port->port.tty;
1267 dbg("%s - bad tty pointer - exiting", __func__);
1271 spin_lock_irqsave(&priv->lock, flags);
1272 result = urb->actual_length;
1273 switch (priv->pkt_fmt) {
1275 case packet_format_1:
1276 /* This is for the CY7C64013... */
1277 priv->current_status = data[0] & 0xF8;
1278 bytes = data[1] + 2;
1283 case packet_format_2:
1284 /* This is for the CY7C63743... */
1285 priv->current_status = data[0] & 0xF8;
1286 bytes = (data[0] & 0x07) + 1;
1292 spin_unlock_irqrestore(&priv->lock, flags);
1293 if (result < bytes) {
1294 dbg("%s - wrong packet size - received %d bytes but packet "
1295 "said %d bytes", __func__, result, bytes);
1299 usb_serial_debug_data (debug, &port->dev, __func__,
1300 urb->actual_length, data);
1302 spin_lock_irqsave(&priv->lock, flags);
1303 /* check to see if status has changed */
1304 if (priv->current_status != priv->prev_status) {
1305 priv->diff_status |= priv->current_status ^
1307 wake_up_interruptible(&priv->delta_msr_wait);
1308 priv->prev_status = priv->current_status;
1310 spin_unlock_irqrestore(&priv->lock, flags);
1312 /* hangup, as defined in acm.c... this might be a bad place for it
1314 if (tty && !(tty->termios->c_cflag & CLOCAL) &&
1315 !(priv->current_status & UART_CD)) {
1316 dbg("%s - calling hangup", __func__);
1321 /* There is one error bit... I'm assuming it is a parity error
1322 * indicator as the generic firmware will set this bit to 1 if a
1323 * parity error occurs.
1324 * I can not find reference to any other error events. */
1325 spin_lock_irqsave(&priv->lock, flags);
1326 if (priv->current_status & CYP_ERROR) {
1327 spin_unlock_irqrestore(&priv->lock, flags);
1328 tty_flag = TTY_PARITY;
1329 dbg("%s - Parity Error detected", __func__);
1331 spin_unlock_irqrestore(&priv->lock, flags);
1333 /* process read if there is data other than line status */
1334 if (tty && (bytes > i)) {
1335 bytes = tty_buffer_request_room(tty, bytes);
1336 for (; i < bytes ; ++i) {
1337 dbg("pushing byte number %d - %d - %c", i, data[i],
1339 tty_insert_flip_char(tty, data[i], tty_flag);
1341 tty_flip_buffer_push(port->port.tty);
1344 spin_lock_irqsave(&priv->lock, flags);
1345 /* control and status byte(s) are also counted */
1346 priv->bytes_in += bytes;
1347 spin_unlock_irqrestore(&priv->lock, flags);
1351 /* Continue trying to always read... unless the port has closed. */
1353 if (port->port.count > 0 && priv->comm_is_ok) {
1354 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1355 usb_rcvintpipe(port->serial->dev,
1356 port->interrupt_in_endpointAddress),
1357 port->interrupt_in_urb->transfer_buffer,
1358 port->interrupt_in_urb->transfer_buffer_length,
1359 cypress_read_int_callback, port, priv->read_urb_interval);
1360 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1362 dev_err(&urb->dev->dev, "%s - failed resubmitting "
1363 "read urb, error %d\n", __func__,
1365 cypress_set_dead(port);
1370 } /* cypress_read_int_callback */
1373 static void cypress_write_int_callback(struct urb *urb)
1375 struct usb_serial_port *port = urb->context;
1376 struct cypress_private *priv = usb_get_serial_port_data(port);
1378 int status = urb->status;
1380 dbg("%s - port %d", __func__, port->number);
1389 /* this urb is terminated, clean up */
1390 dbg("%s - urb shutting down with status: %d",
1392 priv->write_urb_in_use = 0;
1394 case -EPIPE: /* no break needed; clear halt and resubmit */
1395 if (!priv->comm_is_ok)
1397 usb_clear_halt(port->serial->dev, 0x02);
1398 /* error in the urb, so we have to resubmit it */
1399 dbg("%s - nonzero write bulk status received: %d",
1401 port->interrupt_out_urb->transfer_buffer_length = 1;
1402 port->interrupt_out_urb->dev = port->serial->dev;
1403 result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
1406 dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n",
1408 cypress_set_dead(port);
1411 dev_err(&urb->dev->dev,"%s - unexpected nonzero write status received: %d\n",
1413 cypress_set_dead(port);
1417 priv->write_urb_in_use = 0;
1419 /* send any buffered data */
1424 /*****************************************************************************
1425 * Write buffer functions - buffering code from pl2303 used
1426 *****************************************************************************/
1431 * Allocate a circular buffer and all associated memory.
1434 static struct cypress_buf *cypress_buf_alloc(unsigned int size)
1437 struct cypress_buf *cb;
1443 cb = kmalloc(sizeof(struct cypress_buf), GFP_KERNEL);
1447 cb->buf_buf = kmalloc(size, GFP_KERNEL);
1448 if (cb->buf_buf == NULL) {
1453 cb->buf_size = size;
1454 cb->buf_get = cb->buf_put = cb->buf_buf;
1464 * Free the buffer and all associated memory.
1467 static void cypress_buf_free(struct cypress_buf *cb)
1479 * Clear out all data in the circular buffer.
1482 static void cypress_buf_clear(struct cypress_buf *cb)
1485 cb->buf_get = cb->buf_put;
1486 /* equivalent to a get of all data available */
1491 * cypress_buf_data_avail
1493 * Return the number of bytes of data available in the circular
1497 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
1500 return ((cb->buf_size + cb->buf_put - cb->buf_get) % cb->buf_size);
1507 * cypress_buf_space_avail
1509 * Return the number of bytes of space available in the circular
1513 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
1516 return ((cb->buf_size + cb->buf_get - cb->buf_put - 1) % cb->buf_size);
1525 * Copy data data from a user buffer and put it into the circular buffer.
1526 * Restrict to the amount of space available.
1528 * Return the number of bytes copied.
1531 static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf,
1541 len = cypress_buf_space_avail(cb);
1548 len = cb->buf_buf + cb->buf_size - cb->buf_put;
1550 memcpy(cb->buf_put, buf, len);
1551 memcpy(cb->buf_buf, buf+len, count - len);
1552 cb->buf_put = cb->buf_buf + count - len;
1554 memcpy(cb->buf_put, buf, count);
1556 cb->buf_put += count;
1557 else /* count == len */
1558 cb->buf_put = cb->buf_buf;
1569 * Get data from the circular buffer and copy to the given buffer.
1570 * Restrict to the amount of data available.
1572 * Return the number of bytes copied.
1575 static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf,
1585 len = cypress_buf_data_avail(cb);
1592 len = cb->buf_buf + cb->buf_size - cb->buf_get;
1594 memcpy(buf, cb->buf_get, len);
1595 memcpy(buf+len, cb->buf_buf, count - len);
1596 cb->buf_get = cb->buf_buf + count - len;
1598 memcpy(buf, cb->buf_get, count);
1600 cb->buf_get += count;
1601 else /* count == len */
1602 cb->buf_get = cb->buf_buf;
1609 /*****************************************************************************
1611 *****************************************************************************/
1613 static int __init cypress_init(void)
1617 dbg("%s", __func__);
1619 retval = usb_serial_register(&cypress_earthmate_device);
1621 goto failed_em_register;
1622 retval = usb_serial_register(&cypress_hidcom_device);
1624 goto failed_hidcom_register;
1625 retval = usb_serial_register(&cypress_ca42v2_device);
1627 goto failed_ca42v2_register;
1628 retval = usb_register(&cypress_driver);
1630 goto failed_usb_register;
1632 info(DRIVER_DESC " " DRIVER_VERSION);
1635 failed_usb_register:
1636 usb_serial_deregister(&cypress_ca42v2_device);
1637 failed_ca42v2_register:
1638 usb_serial_deregister(&cypress_hidcom_device);
1639 failed_hidcom_register:
1640 usb_serial_deregister(&cypress_earthmate_device);
1646 static void __exit cypress_exit (void)
1648 dbg("%s", __func__);
1650 usb_deregister (&cypress_driver);
1651 usb_serial_deregister (&cypress_earthmate_device);
1652 usb_serial_deregister (&cypress_hidcom_device);
1653 usb_serial_deregister (&cypress_ca42v2_device);
1657 module_init(cypress_init);
1658 module_exit(cypress_exit);
1660 MODULE_AUTHOR( DRIVER_AUTHOR );
1661 MODULE_DESCRIPTION( DRIVER_DESC );
1662 MODULE_VERSION( DRIVER_VERSION );
1663 MODULE_LICENSE("GPL");
1665 module_param(debug, bool, S_IRUGO | S_IWUSR);
1666 MODULE_PARM_DESC(debug, "Debug enabled or not");
1667 module_param(stats, bool, S_IRUGO | S_IWUSR);
1668 MODULE_PARM_DESC(stats, "Enable statistics or not");
1669 module_param(interval, int, S_IRUGO | S_IWUSR);
1670 MODULE_PARM_DESC(interval, "Overrides interrupt interval");