]> err.no Git - linux-2.6/blob - drivers/usb/host/ohci-au1xxx.c
1b9abdba920b9d18a8a53723a8eabc58342eaf0d
[linux-2.6] / drivers / usb / host / ohci-au1xxx.c
1 /*
2  * OHCI HCD (Host Controller Driver) for USB.
3  *
4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
6  * (C) Copyright 2002 Hewlett-Packard Company
7  *
8  * Bus Glue for AMD Alchemy Au1xxx
9  *
10  * Written by Christopher Hoover <ch@hpl.hp.com>
11  * Based on fragments of previous driver by Rusell King et al.
12  *
13  * Modified for LH7A404 from ohci-sa1111.c
14  *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
15  * Modified for AMD Alchemy Au1xxx
16  *  by Matt Porter <mporter@kernel.crashing.org>
17  *
18  * This file is licenced under the GPL.
19  */
20
21 #include <linux/platform_device.h>
22 #include <linux/signal.h>
23
24 #include <asm/mach-au1x00/au1000.h>
25
26 #ifndef CONFIG_SOC_AU1200
27
28 #define USBH_ENABLE_BE (1<<0)
29 #define USBH_ENABLE_C  (1<<1)
30 #define USBH_ENABLE_E  (1<<2)
31 #define USBH_ENABLE_CE (1<<3)
32 #define USBH_ENABLE_RD (1<<4)
33
34 #ifdef __LITTLE_ENDIAN
35 #define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
36 #elif __BIG_ENDIAN
37 #define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | USBH_ENABLE_BE)
38 #else
39 #error not byte order defined
40 #endif
41
42 #else   /* Au1200 */
43
44 #define USB_HOST_CONFIG    (USB_MSR_BASE + USB_MSR_MCFG)
45 #define USB_MCFG_PFEN     (1<<31)
46 #define USB_MCFG_RDCOMB   (1<<30)
47 #define USB_MCFG_SSDEN    (1<<23)
48 #define USB_MCFG_OHCCLKEN (1<<16)
49 #define USB_MCFG_UCAM     (1<<7)
50 #define USB_MCFG_OBMEN    (1<<1)
51 #define USB_MCFG_OMEMEN   (1<<0)
52
53 #define USBH_ENABLE_CE    USB_MCFG_OHCCLKEN
54 #ifdef CONFIG_DMA_COHERENT
55 #define USBH_ENABLE_INIT  (USB_MCFG_OHCCLKEN \
56                          | USB_MCFG_PFEN | USB_MCFG_RDCOMB \
57                          | USB_MCFG_SSDEN | USB_MCFG_UCAM \
58                          | USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
59 #else
60 #define USBH_ENABLE_INIT  (USB_MCFG_OHCCLKEN \
61                          | USB_MCFG_PFEN | USB_MCFG_RDCOMB \
62                          | USB_MCFG_SSDEN \
63                          | USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
64 #endif
65 #define USBH_DISABLE      (USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
66
67 #endif  /* Au1200 */
68
69 extern int usb_disabled(void);
70
71 /*-------------------------------------------------------------------------*/
72
73 static void au1xxx_start_ohc(struct platform_device *dev)
74 {
75         printk(KERN_DEBUG __FILE__
76                 ": starting Au1xxx OHCI USB Controller\n");
77
78         /* enable host controller */
79
80 #ifndef CONFIG_SOC_AU1200
81
82         au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
83         udelay(1000);
84         au_writel(USBH_ENABLE_INIT, USB_HOST_CONFIG);
85         udelay(1000);
86
87 #else   /* Au1200 */
88
89         /* write HW defaults again in case Yamon cleared them */
90         if (au_readl(USB_HOST_CONFIG) == 0) {
91                 au_writel(0x00d02000, USB_HOST_CONFIG);
92                 au_readl(USB_HOST_CONFIG);
93                 udelay(1000);
94         }
95         au_writel(USBH_ENABLE_CE | au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
96         au_readl(USB_HOST_CONFIG);
97         udelay(1000);
98         au_writel(USBH_ENABLE_INIT | au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
99         au_readl(USB_HOST_CONFIG);
100         udelay(1000);
101
102 #endif  /* Au1200 */
103
104 #ifndef CONFIG_SOC_AU1200
105         /* wait for reset complete (read register twice; see au1500 errata) */
106         while (au_readl(USB_HOST_CONFIG),
107                 !(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
108 #endif
109                 udelay(1000);
110
111         printk(KERN_DEBUG __FILE__
112         ": Clock to USB host has been enabled \n");
113 }
114
115 static void au1xxx_stop_ohc(struct platform_device *dev)
116 {
117         printk(KERN_DEBUG __FILE__
118                ": stopping Au1xxx OHCI USB Controller\n");
119
120 #ifndef CONFIG_SOC_AU1200
121
122         /* Disable clock */
123         au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
124
125 #else   /* Au1200 */
126
127         /* Disable mem */
128         au_writel(~USBH_DISABLE & au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
129         udelay(1000);
130         /* Disable clock */
131         au_writel(~USBH_ENABLE_CE & au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
132         au_readl(USB_HOST_CONFIG);
133 #endif  /* Au1200 */
134 }
135
136
137 /*-------------------------------------------------------------------------*/
138
139 /* configure so an HC device and id are always provided */
140 /* always called with process context; sleeping is OK */
141
142
143 /**
144  * usb_ohci_au1xxx_probe - initialize Au1xxx-based HCDs
145  * Context: !in_interrupt()
146  *
147  * Allocates basic resources for this USB host controller, and
148  * then invokes the start() method for the HCD associated with it
149  * through the hotplug entry's driver_data.
150  *
151  */
152 static int usb_ohci_au1xxx_probe(const struct hc_driver *driver,
153                           struct platform_device *dev)
154 {
155         int retval;
156         struct usb_hcd *hcd;
157
158 #if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
159         /* Au1200 AB USB does not support coherent memory */
160         if (!(read_c0_prid() & 0xff)) {
161                 pr_info("%s: this is chip revision AB !!\n",
162                         dev->name);
163                 pr_info("%s: update your board or re-configure the kernel\n",
164                         dev->name);
165                 return -ENODEV;
166         }
167 #endif
168
169         if (dev->resource[1].flags != IORESOURCE_IRQ) {
170                 pr_debug("resource[1] is not IORESOURCE_IRQ\n");
171                 return -ENOMEM;
172         }
173
174         hcd = usb_create_hcd(driver, &dev->dev, "au1xxx");
175         if (!hcd)
176                 return -ENOMEM;
177         hcd->rsrc_start = dev->resource[0].start;
178         hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
179
180         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
181                 pr_debug("request_mem_region failed\n");
182                 retval = -EBUSY;
183                 goto err1;
184         }
185
186         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
187         if (!hcd->regs) {
188                 pr_debug("ioremap failed\n");
189                 retval = -ENOMEM;
190                 goto err2;
191         }
192
193         au1xxx_start_ohc(dev);
194         ohci_hcd_init(hcd_to_ohci(hcd));
195
196         retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED | IRQF_SHARED);
197         if (retval == 0)
198                 return retval;
199
200         au1xxx_stop_ohc(dev);
201         iounmap(hcd->regs);
202  err2:
203         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
204  err1:
205         usb_put_hcd(hcd);
206         return retval;
207 }
208
209
210 /* may be called without controller electrically present */
211 /* may be called with controller, bus, and devices active */
212
213 /**
214  * usb_hcd_au1xxx_remove - shutdown processing for Au1xxx-based HCDs
215  * @dev: USB Host Controller being removed
216  * Context: !in_interrupt()
217  *
218  * Reverses the effect of usb_hcd_au1xxx_probe(), first invoking
219  * the HCD's stop() method.  It is always called from a thread
220  * context, normally "rmmod", "apmd", or something similar.
221  *
222  */
223 static void usb_ohci_au1xxx_remove(struct usb_hcd *hcd, struct platform_device *dev)
224 {
225         usb_remove_hcd(hcd);
226         au1xxx_stop_ohc(dev);
227         iounmap(hcd->regs);
228         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
229         usb_put_hcd(hcd);
230 }
231
232 /*-------------------------------------------------------------------------*/
233
234 static int __devinit
235 ohci_au1xxx_start (struct usb_hcd *hcd)
236 {
237         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
238         int             ret;
239
240         ohci_dbg (ohci, "ohci_au1xxx_start, ohci:%p", ohci);
241
242         if ((ret = ohci_init (ohci)) < 0)
243                 return ret;
244
245         if ((ret = ohci_run (ohci)) < 0) {
246                 err ("can't start %s", hcd->self.bus_name);
247                 ohci_stop (hcd);
248                 return ret;
249         }
250
251         return 0;
252 }
253
254 /*-------------------------------------------------------------------------*/
255
256 static const struct hc_driver ohci_au1xxx_hc_driver = {
257         .description =          hcd_name,
258         .product_desc =         "Au1xxx OHCI",
259         .hcd_priv_size =        sizeof(struct ohci_hcd),
260
261         /*
262          * generic hardware linkage
263          */
264         .irq =                  ohci_irq,
265         .flags =                HCD_USB11 | HCD_MEMORY,
266
267         /*
268          * basic lifecycle operations
269          */
270         .start =                ohci_au1xxx_start,
271         .stop =                 ohci_stop,
272         .shutdown =             ohci_shutdown,
273
274         /*
275          * managing i/o requests and associated device resources
276          */
277         .urb_enqueue =          ohci_urb_enqueue,
278         .urb_dequeue =          ohci_urb_dequeue,
279         .endpoint_disable =     ohci_endpoint_disable,
280
281         /*
282          * scheduling support
283          */
284         .get_frame_number =     ohci_get_frame,
285
286         /*
287          * root hub support
288          */
289         .hub_status_data =      ohci_hub_status_data,
290         .hub_control =          ohci_hub_control,
291 #ifdef  CONFIG_PM
292         .bus_suspend =          ohci_bus_suspend,
293         .bus_resume =           ohci_bus_resume,
294 #endif
295         .start_port_reset =     ohci_start_port_reset,
296 };
297
298 /*-------------------------------------------------------------------------*/
299
300 static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
301 {
302         int ret;
303
304         pr_debug ("In ohci_hcd_au1xxx_drv_probe");
305
306         if (usb_disabled())
307                 return -ENODEV;
308
309         ret = usb_ohci_au1xxx_probe(&ohci_au1xxx_hc_driver, pdev);
310         return ret;
311 }
312
313 static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
314 {
315         struct usb_hcd *hcd = platform_get_drvdata(pdev);
316
317         usb_ohci_au1xxx_remove(hcd, pdev);
318         return 0;
319 }
320         /*TBD*/
321 /*static int ohci_hcd_au1xxx_drv_suspend(struct platform_device *dev)
322 {
323         struct usb_hcd *hcd = platform_get_drvdata(dev);
324
325         return 0;
326 }
327 static int ohci_hcd_au1xxx_drv_resume(struct platform_device *dev)
328 {
329         struct usb_hcd *hcd = platform_get_drvdata(dev);
330
331         return 0;
332 }
333 */
334
335 static struct platform_driver ohci_hcd_au1xxx_driver = {
336         .probe          = ohci_hcd_au1xxx_drv_probe,
337         .remove         = ohci_hcd_au1xxx_drv_remove,
338         .shutdown       = usb_hcd_platform_shutdown,
339         /*.suspend      = ohci_hcd_au1xxx_drv_suspend, */
340         /*.resume       = ohci_hcd_au1xxx_drv_resume, */
341         .driver         = {
342                 .name   = "au1xxx-ohci",
343                 .owner  = THIS_MODULE,
344         },
345 };
346
347 MODULE_ALIAS("platform:au1xxx-ohci");