err.no Git - linux-2.6/blob - drivers/usb/host/ehci-hub.c

   1 /*
   2  * Copyright (c) 2001-2002 by David Brownell
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License as published by the
   6  * Free Software Foundation; either version 2 of the License, or (at your
   7  * option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful, but
  10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  * for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software Foundation,
  16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  17  */
  18
  19 /* this file is part of ehci-hcd.c */
  20
  21 /*-------------------------------------------------------------------------*/
  22
  23 /*
  24  * EHCI Root Hub ... the nonsharable stuff
  25  *
  26  * Registers don't need cpu_to_le32, that happens transparently
  27  */
  28
  29 /*-------------------------------------------------------------------------*/
  30
  31 #ifdef  CONFIG_PM
  32
  33 static int ehci_hub_suspend (struct usb_hcd *hcd)
  34 {
  35         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
  36         int                     port;
  37
  38         if (time_before (jiffies, ehci->next_statechange))
  39                 msleep(5);
  40
  41         port = HCS_N_PORTS (ehci->hcs_params);
  42         spin_lock_irq (&ehci->lock);
  43
  44         /* stop schedules, clean any completed work */
  45         if (HC_IS_RUNNING(hcd->state)) {
  46                 ehci_quiesce (ehci);
  47                 hcd->state = HC_STATE_QUIESCING;
  48         }
  49         ehci->command = readl (&ehci->regs->command);
  50         if (ehci->reclaim)
  51                 ehci->reclaim_ready = 1;
  52         ehci_work(ehci, NULL);
  53
  54         /* suspend any active/unsuspended ports, maybe allow wakeup */
  55         while (port--) {
  56                 u32 __iomem     *reg = &ehci->regs->port_status [port];
  57                 u32             t1 = readl (reg);
  58                 u32             t2 = t1;
  59
  60                 if ((t1 & PORT_PE) && !(t1 & PORT_OWNER))
  61                         t2 |= PORT_SUSPEND;
  62                 if (hcd->remote_wakeup)
  63                         t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
  64                 else
  65                         t2 &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E);
  66
  67                 if (t1 != t2) {
  68                         ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
  69                                 port + 1, t1, t2);
  70                         writel (t2, reg);
  71                 }
  72         }
  73
  74         /* turn off now-idle HC */
  75         ehci_halt (ehci);
  76         hcd->state = HC_STATE_SUSPENDED;
  77
  78         ehci->next_statechange = jiffies + msecs_to_jiffies(10);
  79         spin_unlock_irq (&ehci->lock);
  80         return 0;
  81 }
  82
  83
  84 /* caller has locked the root hub, and should reset/reinit on error */
  85 static int ehci_hub_resume (struct usb_hcd *hcd)
  86 {
  87         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
  88         u32                     temp;
  89         int                     i;
  90         int                     intr_enable;
  91
  92         if (time_before (jiffies, ehci->next_statechange))
  93                 msleep(5);
  94         spin_lock_irq (&ehci->lock);
  95
  96         /* re-init operational registers in case we lost power */
  97         if (readl (&ehci->regs->intr_enable) == 0) {
  98                 /* at least some APM implementations will try to deliver
  99                  * IRQs right away, so delay them until we're ready.
 100                  */
 101                 intr_enable = 1;
 102                 writel (0, &ehci->regs->segment);
 103                 writel (ehci->periodic_dma, &ehci->regs->frame_list);
 104                 writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next);
 105         } else
 106                 intr_enable = 0;
 107         ehci_dbg(ehci, "resume root hub%s\n",
 108                         intr_enable ? " after power loss" : "");
 109
 110         /* restore CMD_RUN, framelist size, and irq threshold */
 111         writel (ehci->command, &ehci->regs->command);
 112
 113         /* take ports out of suspend */
 114         i = HCS_N_PORTS (ehci->hcs_params);
 115         while (i--) {
 116                 temp = readl (&ehci->regs->port_status [i]);
 117                 temp &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E);
 118                 if (temp & PORT_SUSPEND) {
 119                         ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
 120                         temp |= PORT_RESUME;
 121                 }
 122                 writel (temp, &ehci->regs->port_status [i]);
 123         }
 124         i = HCS_N_PORTS (ehci->hcs_params);
 125         mdelay (20);
 126         while (i--) {
 127                 temp = readl (&ehci->regs->port_status [i]);
 128                 if ((temp & PORT_SUSPEND) == 0)
 129                         continue;
 130                 temp &= ~PORT_RESUME;
 131                 writel (temp, &ehci->regs->port_status [i]);
 132                 ehci_vdbg (ehci, "resumed port %d\n", i + 1);
 133         }
 134         (void) readl (&ehci->regs->command);
 135
 136         /* maybe re-activate the schedule(s) */
 137         temp = 0;
 138         if (ehci->async->qh_next.qh)
 139                 temp |= CMD_ASE;
 140         if (ehci->periodic_sched)
 141                 temp |= CMD_PSE;
 142         if (temp) {
 143                 ehci->command |= temp;
 144                 writel (ehci->command, &ehci->regs->command);
 145         }
 146
 147         ehci->next_statechange = jiffies + msecs_to_jiffies(5);
 148         hcd->state = HC_STATE_RUNNING;
 149
 150         /* Now we can safely re-enable irqs */
 151         if (intr_enable)
 152                 writel (INTR_MASK, &ehci->regs->intr_enable);
 153
 154         spin_unlock_irq (&ehci->lock);
 155         return 0;
 156 }
 157
 158 #else
 159
 160 #define ehci_hub_suspend        NULL
 161 #define ehci_hub_resume         NULL
 162
 163 #endif  /* CONFIG_PM */
 164
 165 /*-------------------------------------------------------------------------*/
 166
 167 static int check_reset_complete (
 168         struct ehci_hcd *ehci,
 169         int             index,
 170         int             port_status
 171 ) {
 172         if (!(port_status & PORT_CONNECT)) {
 173                 ehci->reset_done [index] = 0;
 174                 return port_status;
 175         }
 176
 177         /* if reset finished and it's still not enabled -- handoff */
 178         if (!(port_status & PORT_PE)) {
 179
 180                 /* with integrated TT, there's nobody to hand it to! */
 181                 if (ehci_is_TDI(ehci)) {
 182                         ehci_dbg (ehci,
 183                                 "Failed to enable port %d on root hub TT\n",
 184                                 index+1);
 185                         return port_status;
 186                 }
 187
 188                 ehci_dbg (ehci, "port %d full speed --> companion\n",
 189                         index + 1);
 190
 191                 // what happens if HCS_N_CC(params) == 0 ?
 192                 port_status |= PORT_OWNER;
 193                 writel (port_status, &ehci->regs->port_status [index]);
 194
 195         } else
 196                 ehci_dbg (ehci, "port %d high speed\n", index + 1);
 197
 198         return port_status;
 199 }
 200
 201 /*-------------------------------------------------------------------------*/
 202
 203
 204 /* build "status change" packet (one or two bytes) from HC registers */
 205
 206 static int
 207 ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 208 {
 209         struct ehci_hcd *ehci = hcd_to_ehci (hcd);
 210         u32             temp, status = 0;
 211         int             ports, i, retval = 1;
 212         unsigned long   flags;
 213
 214         /* if !USB_SUSPEND, root hub timers won't get shut down ... */
 215         if (!HC_IS_RUNNING(hcd->state))
 216                 return 0;
 217
 218         /* init status to no-changes */
 219         buf [0] = 0;
 220         ports = HCS_N_PORTS (ehci->hcs_params);
 221         if (ports > 7) {
 222                 buf [1] = 0;
 223                 retval++;
 224         }
 225
 226         /* no hub change reports (bit 0) for now (power, ...) */
 227
 228         /* port N changes (bit N)? */
 229         spin_lock_irqsave (&ehci->lock, flags);
 230         for (i = 0; i < ports; i++) {
 231                 temp = readl (&ehci->regs->port_status [i]);
 232                 if (temp & PORT_OWNER) {
 233                         /* don't report this in GetPortStatus */
 234                         if (temp & PORT_CSC) {
 235                                 temp &= ~PORT_CSC;
 236                                 writel (temp, &ehci->regs->port_status [i]);
 237                         }
 238                         continue;
 239                 }
 240                 if (!(temp & PORT_CONNECT))
 241                         ehci->reset_done [i] = 0;
 242                 if ((temp & (PORT_CSC | PORT_PEC | PORT_OCC)) != 0
 243                                 // PORT_STAT_C_SUSPEND?
 244                                 || ((temp & PORT_RESUME) != 0
 245                                         && time_after (jiffies,
 246                                                 ehci->reset_done [i]))) {
 247                         if (i < 7)
 248                             buf [0] |= 1 << (i + 1);
 249                         else
 250                             buf [1] |= 1 << (i - 7);
 251                         status = STS_PCD;
 252                 }
 253         }
 254         /* FIXME autosuspend idle root hubs */
 255         spin_unlock_irqrestore (&ehci->lock, flags);
 256         return status ? retval : 0;
 257 }
 258
 259 /*-------------------------------------------------------------------------*/
 260
 261 static void
 262 ehci_hub_descriptor (
 263         struct ehci_hcd                 *ehci,
 264         struct usb_hub_descriptor       *desc
 265 ) {
 266         int             ports = HCS_N_PORTS (ehci->hcs_params);
 267         u16             temp;
 268
 269         desc->bDescriptorType = 0x29;
 270         desc->bPwrOn2PwrGood = 10;      /* ehci 1.0, 2.3.9 says 20ms max */
 271         desc->bHubContrCurrent = 0;
 272
 273         desc->bNbrPorts = ports;
 274         temp = 1 + (ports / 8);
 275         desc->bDescLength = 7 + 2 * temp;
 276
 277         /* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
 278         memset (&desc->bitmap [0], 0, temp);
 279         memset (&desc->bitmap [temp], 0xff, temp);
 280
 281         temp = 0x0008;                  /* per-port overcurrent reporting */
 282         if (HCS_PPC (ehci->hcs_params))
 283                 temp |= 0x0001;         /* per-port power control */
 284         else
 285                 temp |= 0x0002;         /* no power switching */
 286 #if 0
 287 // re-enable when we support USB_PORT_FEAT_INDICATOR below.
 288         if (HCS_INDICATOR (ehci->hcs_params))
 289                 temp |= 0x0080;         /* per-port indicators (LEDs) */
 290 #endif
 291         desc->wHubCharacteristics = (__force __u16)cpu_to_le16 (temp);
 292 }
 293
 294 /*-------------------------------------------------------------------------*/
 295
 296 #define PORT_WAKE_BITS  (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
 297
 298 static int ehci_hub_control (
 299         struct usb_hcd  *hcd,
 300         u16             typeReq,
 301         u16             wValue,
 302         u16             wIndex,
 303         char            *buf,
 304         u16             wLength
 305 ) {
 306         struct ehci_hcd *ehci = hcd_to_ehci (hcd);
 307         int             ports = HCS_N_PORTS (ehci->hcs_params);
 308         u32             temp, status;
 309         unsigned long   flags;
 310         int             retval = 0;
 311
 312         /*
 313          * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
 314          * HCS_INDICATOR may say we can change LEDs to off/amber/green.
 315          * (track current state ourselves) ... blink for diagnostics,
 316          * power, "this is the one", etc.  EHCI spec supports this.
 317          */
 318
 319         spin_lock_irqsave (&ehci->lock, flags);
 320         switch (typeReq) {
 321         case ClearHubFeature:
 322                 switch (wValue) {
 323                 case C_HUB_LOCAL_POWER:
 324                 case C_HUB_OVER_CURRENT:
 325                         /* no hub-wide feature/status flags */
 326                         break;
 327                 default:
 328                         goto error;
 329                 }
 330                 break;
 331         case ClearPortFeature:
 332                 if (!wIndex || wIndex > ports)
 333                         goto error;
 334                 wIndex--;
 335                 temp = readl (&ehci->regs->port_status [wIndex]);
 336                 if (temp & PORT_OWNER)
 337                         break;
 338
 339                 switch (wValue) {
 340                 case USB_PORT_FEAT_ENABLE:
 341                         writel (temp & ~PORT_PE,
 342                                 &ehci->regs->port_status [wIndex]);
 343                         break;
 344                 case USB_PORT_FEAT_C_ENABLE:
 345                         writel (temp | PORT_PEC,
 346                                 &ehci->regs->port_status [wIndex]);
 347                         break;
 348                 case USB_PORT_FEAT_SUSPEND:
 349                         if (temp & PORT_RESET)
 350                                 goto error;
 351                         if (temp & PORT_SUSPEND) {
 352                                 if ((temp & PORT_PE) == 0)
 353                                         goto error;
 354                                 /* resume signaling for 20 msec */
 355                                 writel ((temp & ~PORT_WAKE_BITS) | PORT_RESUME,
 356                                         &ehci->regs->port_status [wIndex]);
 357                                 ehci->reset_done [wIndex] = jiffies
 358                                                 + msecs_to_jiffies (20);
 359                         }
 360                         break;
 361                 case USB_PORT_FEAT_C_SUSPEND:
 362                         /* we auto-clear this feature */
 363                         break;
 364                 case USB_PORT_FEAT_POWER:
 365                         if (HCS_PPC (ehci->hcs_params))
 366                                 writel (temp & ~PORT_POWER,
 367                                         &ehci->regs->port_status [wIndex]);
 368                         break;
 369                 case USB_PORT_FEAT_C_CONNECTION:
 370                         writel (temp | PORT_CSC,
 371                                 &ehci->regs->port_status [wIndex]);
 372                         break;
 373                 case USB_PORT_FEAT_C_OVER_CURRENT:
 374                         writel (temp | PORT_OCC,
 375                                 &ehci->regs->port_status [wIndex]);
 376                         break;
 377                 case USB_PORT_FEAT_C_RESET:
 378                         /* GetPortStatus clears reset */
 379                         break;
 380                 default:
 381                         goto error;
 382                 }
 383                 readl (&ehci->regs->command);   /* unblock posted write */
 384                 break;
 385         case GetHubDescriptor:
 386                 ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
 387                         buf);
 388                 break;
 389         case GetHubStatus:
 390                 /* no hub-wide feature/status flags */
 391                 memset (buf, 0, 4);
 392                 //cpu_to_le32s ((u32 *) buf);
 393                 break;
 394         case GetPortStatus:
 395                 if (!wIndex || wIndex > ports)
 396                         goto error;
 397                 wIndex--;
 398                 status = 0;
 399                 temp = readl (&ehci->regs->port_status [wIndex]);
 400
 401                 // wPortChange bits
 402                 if (temp & PORT_CSC)
 403                         status |= 1 << USB_PORT_FEAT_C_CONNECTION;
 404                 if (temp & PORT_PEC)
 405                         status |= 1 << USB_PORT_FEAT_C_ENABLE;
 406                 if (temp & PORT_OCC)
 407                         status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
 408
 409                 /* whoever resumes must GetPortStatus to complete it!! */
 410                 if ((temp & PORT_RESUME)
 411                                 && time_after (jiffies,
 412                                         ehci->reset_done [wIndex])) {
 413                         status |= 1 << USB_PORT_FEAT_C_SUSPEND;
 414                         ehci->reset_done [wIndex] = 0;
 415
 416                         /* stop resume signaling */
 417                         temp = readl (&ehci->regs->port_status [wIndex]);
 418                         writel (temp & ~PORT_RESUME,
 419                                 &ehci->regs->port_status [wIndex]);
 420                         retval = handshake (
 421                                         &ehci->regs->port_status [wIndex],
 422                                         PORT_RESUME, 0, 2000 /* 2msec */);
 423                         if (retval != 0) {
 424                                 ehci_err (ehci, "port %d resume error %d\n",
 425                                         wIndex + 1, retval);
 426                                 goto error;
 427                         }
 428                         temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
 429                 }
 430
 431                 /* whoever resets must GetPortStatus to complete it!! */
 432                 if ((temp & PORT_RESET)
 433                                 && time_after (jiffies,
 434                                         ehci->reset_done [wIndex])) {
 435                         status |= 1 << USB_PORT_FEAT_C_RESET;
 436                         ehci->reset_done [wIndex] = 0;
 437
 438                         /* force reset to complete */
 439                         writel (temp & ~PORT_RESET,
 440                                         &ehci->regs->port_status [wIndex]);
 441                         retval = handshake (
 442                                         &ehci->regs->port_status [wIndex],
 443                                         PORT_RESET, 0, 500);
 444                         if (retval != 0) {
 445                                 ehci_err (ehci, "port %d reset error %d\n",
 446                                         wIndex + 1, retval);
 447                                 goto error;
 448                         }
 449
 450                         /* see what we found out */
 451                         temp = check_reset_complete (ehci, wIndex,
 452                                 readl (&ehci->regs->port_status [wIndex]));
 453                 }
 454
 455                 // don't show wPortStatus if it's owned by a companion hc
 456                 if (!(temp & PORT_OWNER)) {
 457                         if (temp & PORT_CONNECT) {
 458                                 status |= 1 << USB_PORT_FEAT_CONNECTION;
 459                                 // status may be from integrated TT
 460                                 status |= ehci_port_speed(ehci, temp);
 461                         }
 462                         if (temp & PORT_PE)
 463                                 status |= 1 << USB_PORT_FEAT_ENABLE;
 464                         if (temp & (PORT_SUSPEND|PORT_RESUME))
 465                                 status |= 1 << USB_PORT_FEAT_SUSPEND;
 466                         if (temp & PORT_OC)
 467                                 status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
 468                         if (temp & PORT_RESET)
 469                                 status |= 1 << USB_PORT_FEAT_RESET;
 470                         if (temp & PORT_POWER)
 471                                 status |= 1 << USB_PORT_FEAT_POWER;
 472                 }
 473
 474 #ifndef EHCI_VERBOSE_DEBUG
 475         if (status & ~0xffff)   /* only if wPortChange is interesting */
 476 #endif
 477                 dbg_port (ehci, "GetStatus", wIndex + 1, temp);
 478                 // we "know" this alignment is good, caller used kmalloc()...
 479                 *((__le32 *) buf) = cpu_to_le32 (status);
 480                 break;
 481         case SetHubFeature:
 482                 switch (wValue) {
 483                 case C_HUB_LOCAL_POWER:
 484                 case C_HUB_OVER_CURRENT:
 485                         /* no hub-wide feature/status flags */
 486                         break;
 487                 default:
 488                         goto error;
 489                 }
 490                 break;
 491         case SetPortFeature:
 492                 if (!wIndex || wIndex > ports)
 493                         goto error;
 494                 wIndex--;
 495                 temp = readl (&ehci->regs->port_status [wIndex]);
 496                 if (temp & PORT_OWNER)
 497                         break;
 498
 499                 switch (wValue) {
 500                 case USB_PORT_FEAT_SUSPEND:
 501                         if ((temp & PORT_PE) == 0
 502                                         || (temp & PORT_RESET) != 0)
 503                                 goto error;
 504                         if (hcd->remote_wakeup)
 505                                 temp |= PORT_WAKE_BITS;
 506                         writel (temp | PORT_SUSPEND,
 507                                 &ehci->regs->port_status [wIndex]);
 508                         break;
 509                 case USB_PORT_FEAT_POWER:
 510                         if (HCS_PPC (ehci->hcs_params))
 511                                 writel (temp | PORT_POWER,
 512                                         &ehci->regs->port_status [wIndex]);
 513                         break;
 514                 case USB_PORT_FEAT_RESET:
 515                         if (temp & PORT_RESUME)
 516                                 goto error;
 517                         /* line status bits may report this as low speed,
 518                          * which can be fine if this root hub has a
 519                          * transaction translator built in.
 520                          */
 521                         if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
 522                                         && !ehci_is_TDI(ehci)
 523                                         && PORT_USB11 (temp)) {
 524                                 ehci_dbg (ehci,
 525                                         "port %d low speed --> companion\n",
 526                                         wIndex + 1);
 527                                 temp |= PORT_OWNER;
 528                         } else {
 529                                 ehci_vdbg (ehci, "port %d reset\n", wIndex + 1);
 530                                 temp |= PORT_RESET;
 531                                 temp &= ~PORT_PE;
 532
 533                                 /*
 534                                  * caller must wait, then call GetPortStatus
 535                                  * usb 2.0 spec says 50 ms resets on root
 536                                  */
 537                                 ehci->reset_done [wIndex] = jiffies
 538                                                 + msecs_to_jiffies (50);
 539                         }
 540                         writel (temp, &ehci->regs->port_status [wIndex]);
 541                         break;
 542                 default:
 543                         goto error;
 544                 }
 545                 readl (&ehci->regs->command);   /* unblock posted writes */
 546                 break;
 547
 548         default:
 549 error:
 550                 /* "stall" on error */
 551                 retval = -EPIPE;
 552         }
 553         spin_unlock_irqrestore (&ehci->lock, flags);
 554         return retval;
 555 }