2 * (C) Copyright Linus Torvalds 1999
3 * (C) Copyright Johannes Erdfelt 1999-2001
4 * (C) Copyright Andreas Gal 1999
5 * (C) Copyright Gregory P. Smith 1999
6 * (C) Copyright Deti Fliegl 1999
7 * (C) Copyright Randy Dunlap 2000
8 * (C) Copyright David Brownell 2000-2002
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
17 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software Foundation,
22 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <linux/module.h>
26 #include <linux/version.h>
27 #include <linux/kernel.h>
28 #include <linux/slab.h>
29 #include <linux/completion.h>
30 #include <linux/utsname.h>
33 #include <asm/scatterlist.h>
34 #include <linux/device.h>
35 #include <linux/dma-mapping.h>
36 #include <linux/mutex.h>
38 #include <asm/byteorder.h>
39 #include <linux/platform_device.h>
40 #include <linux/workqueue.h>
42 #include <linux/usb.h>
49 /*-------------------------------------------------------------------------*/
52 * USB Host Controller Driver framework
54 * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
55 * HCD-specific behaviors/bugs.
57 * This does error checks, tracks devices and urbs, and delegates to a
58 * "hc_driver" only for code (and data) that really needs to know about
59 * hardware differences. That includes root hub registers, i/o queues,
60 * and so on ... but as little else as possible.
62 * Shared code includes most of the "root hub" code (these are emulated,
63 * though each HC's hardware works differently) and PCI glue, plus request
64 * tracking overhead. The HCD code should only block on spinlocks or on
65 * hardware handshaking; blocking on software events (such as other kernel
66 * threads releasing resources, or completing actions) is all generic.
68 * Happens the USB 2.0 spec says this would be invisible inside the "USBD",
69 * and includes mostly a "HCDI" (HCD Interface) along with some APIs used
70 * only by the hub driver ... and that neither should be seen or used by
71 * usb client device drivers.
73 * Contributors of ideas or unattributed patches include: David Brownell,
74 * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
77 * 2002-02-21 Pull in most of the usb_bus support from usb.c; some
78 * associated cleanup. "usb_hcd" still != "usb_bus".
79 * 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
82 /*-------------------------------------------------------------------------*/
84 /* host controllers we manage */
85 LIST_HEAD (usb_bus_list);
86 EXPORT_SYMBOL_GPL (usb_bus_list);
88 /* used when allocating bus numbers */
91 unsigned long busmap [USB_MAXBUS / (8*sizeof (unsigned long))];
93 static struct usb_busmap busmap;
95 /* used when updating list of hcds */
96 DEFINE_MUTEX(usb_bus_list_lock); /* exported only for usbfs */
97 EXPORT_SYMBOL_GPL (usb_bus_list_lock);
99 /* used for controlling access to virtual root hubs */
100 static DEFINE_SPINLOCK(hcd_root_hub_lock);
102 /* used when updating an endpoint's URB list */
103 static DEFINE_SPINLOCK(hcd_urb_list_lock);
105 /* wait queue for synchronous unlinks */
106 DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
108 static inline int is_root_hub(struct usb_device *udev)
110 return (udev->parent == NULL);
113 /*-------------------------------------------------------------------------*/
116 * Sharable chunks of root hub code.
119 /*-------------------------------------------------------------------------*/
121 #define KERNEL_REL ((LINUX_VERSION_CODE >> 16) & 0x0ff)
122 #define KERNEL_VER ((LINUX_VERSION_CODE >> 8) & 0x0ff)
124 /* usb 2.0 root hub device descriptor */
125 static const u8 usb2_rh_dev_descriptor [18] = {
126 0x12, /* __u8 bLength; */
127 0x01, /* __u8 bDescriptorType; Device */
128 0x00, 0x02, /* __le16 bcdUSB; v2.0 */
130 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
131 0x00, /* __u8 bDeviceSubClass; */
132 0x01, /* __u8 bDeviceProtocol; [ usb 2.0 single TT ]*/
133 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
135 0x00, 0x00, /* __le16 idVendor; */
136 0x00, 0x00, /* __le16 idProduct; */
137 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
139 0x03, /* __u8 iManufacturer; */
140 0x02, /* __u8 iProduct; */
141 0x01, /* __u8 iSerialNumber; */
142 0x01 /* __u8 bNumConfigurations; */
145 /* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
147 /* usb 1.1 root hub device descriptor */
148 static const u8 usb11_rh_dev_descriptor [18] = {
149 0x12, /* __u8 bLength; */
150 0x01, /* __u8 bDescriptorType; Device */
151 0x10, 0x01, /* __le16 bcdUSB; v1.1 */
153 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
154 0x00, /* __u8 bDeviceSubClass; */
155 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
156 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
158 0x00, 0x00, /* __le16 idVendor; */
159 0x00, 0x00, /* __le16 idProduct; */
160 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
162 0x03, /* __u8 iManufacturer; */
163 0x02, /* __u8 iProduct; */
164 0x01, /* __u8 iSerialNumber; */
165 0x01 /* __u8 bNumConfigurations; */
169 /*-------------------------------------------------------------------------*/
171 /* Configuration descriptors for our root hubs */
173 static const u8 fs_rh_config_descriptor [] = {
175 /* one configuration */
176 0x09, /* __u8 bLength; */
177 0x02, /* __u8 bDescriptorType; Configuration */
178 0x19, 0x00, /* __le16 wTotalLength; */
179 0x01, /* __u8 bNumInterfaces; (1) */
180 0x01, /* __u8 bConfigurationValue; */
181 0x00, /* __u8 iConfiguration; */
182 0xc0, /* __u8 bmAttributes;
187 0x00, /* __u8 MaxPower; */
190 * USB 2.0, single TT organization (mandatory):
191 * one interface, protocol 0
193 * USB 2.0, multiple TT organization (optional):
194 * two interfaces, protocols 1 (like single TT)
195 * and 2 (multiple TT mode) ... config is
201 0x09, /* __u8 if_bLength; */
202 0x04, /* __u8 if_bDescriptorType; Interface */
203 0x00, /* __u8 if_bInterfaceNumber; */
204 0x00, /* __u8 if_bAlternateSetting; */
205 0x01, /* __u8 if_bNumEndpoints; */
206 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
207 0x00, /* __u8 if_bInterfaceSubClass; */
208 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
209 0x00, /* __u8 if_iInterface; */
211 /* one endpoint (status change endpoint) */
212 0x07, /* __u8 ep_bLength; */
213 0x05, /* __u8 ep_bDescriptorType; Endpoint */
214 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
215 0x03, /* __u8 ep_bmAttributes; Interrupt */
216 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
217 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
220 static const u8 hs_rh_config_descriptor [] = {
222 /* one configuration */
223 0x09, /* __u8 bLength; */
224 0x02, /* __u8 bDescriptorType; Configuration */
225 0x19, 0x00, /* __le16 wTotalLength; */
226 0x01, /* __u8 bNumInterfaces; (1) */
227 0x01, /* __u8 bConfigurationValue; */
228 0x00, /* __u8 iConfiguration; */
229 0xc0, /* __u8 bmAttributes;
234 0x00, /* __u8 MaxPower; */
237 * USB 2.0, single TT organization (mandatory):
238 * one interface, protocol 0
240 * USB 2.0, multiple TT organization (optional):
241 * two interfaces, protocols 1 (like single TT)
242 * and 2 (multiple TT mode) ... config is
248 0x09, /* __u8 if_bLength; */
249 0x04, /* __u8 if_bDescriptorType; Interface */
250 0x00, /* __u8 if_bInterfaceNumber; */
251 0x00, /* __u8 if_bAlternateSetting; */
252 0x01, /* __u8 if_bNumEndpoints; */
253 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
254 0x00, /* __u8 if_bInterfaceSubClass; */
255 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
256 0x00, /* __u8 if_iInterface; */
258 /* one endpoint (status change endpoint) */
259 0x07, /* __u8 ep_bLength; */
260 0x05, /* __u8 ep_bDescriptorType; Endpoint */
261 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
262 0x03, /* __u8 ep_bmAttributes; Interrupt */
263 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
264 * see hub.c:hub_configure() for details. */
265 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
266 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
269 /*-------------------------------------------------------------------------*/
272 * helper routine for returning string descriptors in UTF-16LE
273 * input can actually be ISO-8859-1; ASCII is its 7-bit subset
275 static int ascii2utf (char *s, u8 *utf, int utfmax)
279 for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) {
291 * rh_string - provides manufacturer, product and serial strings for root hub
292 * @id: the string ID number (1: serial number, 2: product, 3: vendor)
293 * @hcd: the host controller for this root hub
294 * @type: string describing our driver
295 * @data: return packet in UTF-16 LE
296 * @len: length of the return packet
298 * Produces either a manufacturer, product or serial number string for the
299 * virtual root hub device.
301 static int rh_string (
311 buf[0] = 4; buf[1] = 3; /* 4 bytes string data */
312 buf[2] = 0x09; buf[3] = 0x04; /* MSFT-speak for "en-us" */
314 memcpy (data, buf, len);
318 } else if (id == 1) {
319 strlcpy (buf, hcd->self.bus_name, sizeof buf);
321 // product description
322 } else if (id == 2) {
323 strlcpy (buf, hcd->product_desc, sizeof buf);
325 // id 3 == vendor description
326 } else if (id == 3) {
327 snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
328 init_utsname()->release, hcd->driver->description);
330 // unsupported IDs --> "protocol stall"
334 switch (len) { /* All cases fall through */
336 len = 2 + ascii2utf (buf, data + 2, len - 2);
338 data [1] = 3; /* type == string */
340 data [0] = 2 * (strlen (buf) + 1);
342 ; /* Compiler wants a statement here */
348 /* Root hub control transfers execute synchronously */
349 static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
351 struct usb_ctrlrequest *cmd;
352 u16 typeReq, wValue, wIndex, wLength;
353 u8 *ubuf = urb->transfer_buffer;
354 u8 tbuf [sizeof (struct usb_hub_descriptor)]
355 __attribute__((aligned(4)));
356 const u8 *bufp = tbuf;
358 int patch_wakeup = 0;
364 spin_lock_irq(&hcd_root_hub_lock);
365 status = usb_hcd_link_urb_to_ep(hcd, urb);
366 spin_unlock_irq(&hcd_root_hub_lock);
369 urb->hcpriv = hcd; /* Indicate it's queued */
371 cmd = (struct usb_ctrlrequest *) urb->setup_packet;
372 typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
373 wValue = le16_to_cpu (cmd->wValue);
374 wIndex = le16_to_cpu (cmd->wIndex);
375 wLength = le16_to_cpu (cmd->wLength);
377 if (wLength > urb->transfer_buffer_length)
380 urb->actual_length = 0;
383 /* DEVICE REQUESTS */
385 /* The root hub's remote wakeup enable bit is implemented using
386 * driver model wakeup flags. If this system supports wakeup
387 * through USB, userspace may change the default "allow wakeup"
388 * policy through sysfs or these calls.
390 * Most root hubs support wakeup from downstream devices, for
391 * runtime power management (disabling USB clocks and reducing
392 * VBUS power usage). However, not all of them do so; silicon,
393 * board, and BIOS bugs here are not uncommon, so these can't
394 * be treated quite like external hubs.
396 * Likewise, not all root hubs will pass wakeup events upstream,
397 * to wake up the whole system. So don't assume root hub and
398 * controller capabilities are identical.
401 case DeviceRequest | USB_REQ_GET_STATUS:
402 tbuf [0] = (device_may_wakeup(&hcd->self.root_hub->dev)
403 << USB_DEVICE_REMOTE_WAKEUP)
404 | (1 << USB_DEVICE_SELF_POWERED);
408 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
409 if (wValue == USB_DEVICE_REMOTE_WAKEUP)
410 device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
414 case DeviceOutRequest | USB_REQ_SET_FEATURE:
415 if (device_can_wakeup(&hcd->self.root_hub->dev)
416 && wValue == USB_DEVICE_REMOTE_WAKEUP)
417 device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
421 case DeviceRequest | USB_REQ_GET_CONFIGURATION:
425 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
427 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
428 switch (wValue & 0xff00) {
429 case USB_DT_DEVICE << 8:
430 if (hcd->driver->flags & HCD_USB2)
431 bufp = usb2_rh_dev_descriptor;
432 else if (hcd->driver->flags & HCD_USB11)
433 bufp = usb11_rh_dev_descriptor;
438 case USB_DT_CONFIG << 8:
439 if (hcd->driver->flags & HCD_USB2) {
440 bufp = hs_rh_config_descriptor;
441 len = sizeof hs_rh_config_descriptor;
443 bufp = fs_rh_config_descriptor;
444 len = sizeof fs_rh_config_descriptor;
446 if (device_can_wakeup(&hcd->self.root_hub->dev))
449 case USB_DT_STRING << 8:
450 n = rh_string (wValue & 0xff, hcd, ubuf, wLength);
453 urb->actual_length = n;
459 case DeviceRequest | USB_REQ_GET_INTERFACE:
463 case DeviceOutRequest | USB_REQ_SET_INTERFACE:
465 case DeviceOutRequest | USB_REQ_SET_ADDRESS:
466 // wValue == urb->dev->devaddr
467 dev_dbg (hcd->self.controller, "root hub device address %d\n",
471 /* INTERFACE REQUESTS (no defined feature/status flags) */
473 /* ENDPOINT REQUESTS */
475 case EndpointRequest | USB_REQ_GET_STATUS:
476 // ENDPOINT_HALT flag
481 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
482 case EndpointOutRequest | USB_REQ_SET_FEATURE:
483 dev_dbg (hcd->self.controller, "no endpoint features yet\n");
486 /* CLASS REQUESTS (and errors) */
489 /* non-generic request */
495 case GetHubDescriptor:
496 len = sizeof (struct usb_hub_descriptor);
499 status = hcd->driver->hub_control (hcd,
500 typeReq, wValue, wIndex,
504 /* "protocol stall" on error */
510 if (status != -EPIPE) {
511 dev_dbg (hcd->self.controller,
512 "CTRL: TypeReq=0x%x val=0x%x "
513 "idx=0x%x len=%d ==> %d\n",
514 typeReq, wValue, wIndex,
519 if (urb->transfer_buffer_length < len)
520 len = urb->transfer_buffer_length;
521 urb->actual_length = len;
522 // always USB_DIR_IN, toward host
523 memcpy (ubuf, bufp, len);
525 /* report whether RH hardware supports remote wakeup */
527 len > offsetof (struct usb_config_descriptor,
529 ((struct usb_config_descriptor *)ubuf)->bmAttributes
530 |= USB_CONFIG_ATT_WAKEUP;
533 /* any errors get returned through the urb completion */
534 spin_lock_irq(&hcd_root_hub_lock);
535 urb->status = status;
536 usb_hcd_unlink_urb_from_ep(hcd, urb);
538 /* This peculiar use of spinlocks echoes what real HC drivers do.
539 * Avoiding calls to local_irq_disable/enable makes the code
542 spin_unlock(&hcd_root_hub_lock);
543 usb_hcd_giveback_urb(hcd, urb);
544 spin_lock(&hcd_root_hub_lock);
546 spin_unlock_irq(&hcd_root_hub_lock);
550 /*-------------------------------------------------------------------------*/
553 * Root Hub interrupt transfers are polled using a timer if the
554 * driver requests it; otherwise the driver is responsible for
555 * calling usb_hcd_poll_rh_status() when an event occurs.
557 * Completions are called in_interrupt(), but they may or may not
560 void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
565 char buffer[4]; /* Any root hubs with > 31 ports? */
567 if (unlikely(!hcd->rh_registered))
569 if (!hcd->uses_new_polling && !hcd->status_urb)
572 length = hcd->driver->hub_status_data(hcd, buffer);
575 /* try to complete the status urb */
576 spin_lock_irqsave(&hcd_root_hub_lock, flags);
577 urb = hcd->status_urb;
579 hcd->poll_pending = 0;
580 hcd->status_urb = NULL;
582 urb->actual_length = length;
583 memcpy(urb->transfer_buffer, buffer, length);
585 usb_hcd_unlink_urb_from_ep(hcd, urb);
586 spin_unlock(&hcd_root_hub_lock);
587 usb_hcd_giveback_urb(hcd, urb);
588 spin_lock(&hcd_root_hub_lock);
591 hcd->poll_pending = 1;
593 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
596 /* The USB 2.0 spec says 256 ms. This is close enough and won't
597 * exceed that limit if HZ is 100. The math is more clunky than
598 * maybe expected, this is to make sure that all timers for USB devices
599 * fire at the same time to give the CPU a break inbetween */
600 if (hcd->uses_new_polling ? hcd->poll_rh :
601 (length == 0 && hcd->status_urb != NULL))
602 mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
604 EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
607 static void rh_timer_func (unsigned long _hcd)
609 usb_hcd_poll_rh_status((struct usb_hcd *) _hcd);
612 /*-------------------------------------------------------------------------*/
614 static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
618 int len = 1 + (urb->dev->maxchild / 8);
620 spin_lock_irqsave (&hcd_root_hub_lock, flags);
621 if (hcd->status_urb || urb->transfer_buffer_length < len) {
622 dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
627 retval = usb_hcd_link_urb_to_ep(hcd, urb);
631 hcd->status_urb = urb;
632 urb->hcpriv = hcd; /* indicate it's queued */
633 if (!hcd->uses_new_polling)
634 mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
636 /* If a status change has already occurred, report it ASAP */
637 else if (hcd->poll_pending)
638 mod_timer(&hcd->rh_timer, jiffies);
641 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
645 static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
647 if (usb_endpoint_xfer_int(&urb->ep->desc))
648 return rh_queue_status (hcd, urb);
649 if (usb_endpoint_xfer_control(&urb->ep->desc))
650 return rh_call_control (hcd, urb);
654 /*-------------------------------------------------------------------------*/
656 /* Unlinks of root-hub control URBs are legal, but they don't do anything
657 * since these URBs always execute synchronously.
659 static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
664 spin_lock_irqsave(&hcd_root_hub_lock, flags);
665 rc = usb_hcd_check_unlink_urb(hcd, urb, status);
669 if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
672 } else { /* Status URB */
673 if (!hcd->uses_new_polling)
674 del_timer (&hcd->rh_timer);
675 if (urb == hcd->status_urb) {
676 hcd->status_urb = NULL;
677 usb_hcd_unlink_urb_from_ep(hcd, urb);
679 spin_unlock(&hcd_root_hub_lock);
680 usb_hcd_giveback_urb(hcd, urb);
681 spin_lock(&hcd_root_hub_lock);
685 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
692 * Show & store the current value of authorized_default
694 static ssize_t usb_host_authorized_default_show(struct device *dev,
695 struct device_attribute *attr,
698 struct usb_device *rh_usb_dev = to_usb_device(dev);
699 struct usb_bus *usb_bus = rh_usb_dev->bus;
700 struct usb_hcd *usb_hcd;
702 if (usb_bus == NULL) /* FIXME: not sure if this case is possible */
704 usb_hcd = bus_to_hcd(usb_bus);
705 return snprintf(buf, PAGE_SIZE, "%u\n", usb_hcd->authorized_default);
708 static ssize_t usb_host_authorized_default_store(struct device *dev,
709 struct device_attribute *attr,
710 const char *buf, size_t size)
714 struct usb_device *rh_usb_dev = to_usb_device(dev);
715 struct usb_bus *usb_bus = rh_usb_dev->bus;
716 struct usb_hcd *usb_hcd;
718 if (usb_bus == NULL) /* FIXME: not sure if this case is possible */
720 usb_hcd = bus_to_hcd(usb_bus);
721 result = sscanf(buf, "%u\n", &val);
723 usb_hcd->authorized_default = val? 1 : 0;
731 static DEVICE_ATTR(authorized_default, 0644,
732 usb_host_authorized_default_show,
733 usb_host_authorized_default_store);
736 /* Group all the USB bus attributes */
737 static struct attribute *usb_bus_attrs[] = {
738 &dev_attr_authorized_default.attr,
742 static struct attribute_group usb_bus_attr_group = {
743 .name = NULL, /* we want them in the same directory */
744 .attrs = usb_bus_attrs,
749 /*-------------------------------------------------------------------------*/
751 static struct class *usb_host_class;
753 int usb_host_init(void)
757 usb_host_class = class_create(THIS_MODULE, "usb_host");
758 if (IS_ERR(usb_host_class))
759 retval = PTR_ERR(usb_host_class);
763 void usb_host_cleanup(void)
765 class_destroy(usb_host_class);
769 * usb_bus_init - shared initialization code
770 * @bus: the bus structure being initialized
772 * This code is used to initialize a usb_bus structure, memory for which is
773 * separately managed.
775 static void usb_bus_init (struct usb_bus *bus)
777 memset (&bus->devmap, 0, sizeof(struct usb_devmap));
779 bus->devnum_next = 1;
781 bus->root_hub = NULL;
783 bus->bandwidth_allocated = 0;
784 bus->bandwidth_int_reqs = 0;
785 bus->bandwidth_isoc_reqs = 0;
787 INIT_LIST_HEAD (&bus->bus_list);
790 /*-------------------------------------------------------------------------*/
793 * usb_register_bus - registers the USB host controller with the usb core
794 * @bus: pointer to the bus to register
795 * Context: !in_interrupt()
797 * Assigns a bus number, and links the controller into usbcore data
798 * structures so that it can be seen by scanning the bus list.
800 static int usb_register_bus(struct usb_bus *bus)
805 mutex_lock(&usb_bus_list_lock);
806 busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1);
807 if (busnum >= USB_MAXBUS) {
808 printk (KERN_ERR "%s: too many buses\n", usbcore_name);
809 goto error_find_busnum;
811 set_bit (busnum, busmap.busmap);
812 bus->busnum = busnum;
813 bus->class_dev = class_device_create(usb_host_class, NULL, MKDEV(0,0),
814 bus->controller, "usb_host%d",
816 result = PTR_ERR(bus->class_dev);
817 if (IS_ERR(bus->class_dev))
818 goto error_create_class_dev;
819 class_set_devdata(bus->class_dev, bus);
821 /* Add it to the local list of buses */
822 list_add (&bus->bus_list, &usb_bus_list);
823 mutex_unlock(&usb_bus_list_lock);
825 usb_notify_add_bus(bus);
827 dev_info (bus->controller, "new USB bus registered, assigned bus "
828 "number %d\n", bus->busnum);
831 error_create_class_dev:
832 clear_bit(busnum, busmap.busmap);
834 mutex_unlock(&usb_bus_list_lock);
839 * usb_deregister_bus - deregisters the USB host controller
840 * @bus: pointer to the bus to deregister
841 * Context: !in_interrupt()
843 * Recycles the bus number, and unlinks the controller from usbcore data
844 * structures so that it won't be seen by scanning the bus list.
846 static void usb_deregister_bus (struct usb_bus *bus)
848 dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
851 * NOTE: make sure that all the devices are removed by the
852 * controller code, as well as having it call this when cleaning
855 mutex_lock(&usb_bus_list_lock);
856 list_del (&bus->bus_list);
857 mutex_unlock(&usb_bus_list_lock);
859 usb_notify_remove_bus(bus);
861 clear_bit (bus->busnum, busmap.busmap);
863 class_device_unregister(bus->class_dev);
867 * register_root_hub - called by usb_add_hcd() to register a root hub
868 * @hcd: host controller for this root hub
870 * This function registers the root hub with the USB subsystem. It sets up
871 * the device properly in the device tree and then calls usb_new_device()
872 * to register the usb device. It also assigns the root hub's USB address
875 static int register_root_hub(struct usb_hcd *hcd)
877 struct device *parent_dev = hcd->self.controller;
878 struct usb_device *usb_dev = hcd->self.root_hub;
879 const int devnum = 1;
882 usb_dev->devnum = devnum;
883 usb_dev->bus->devnum_next = devnum + 1;
884 memset (&usb_dev->bus->devmap.devicemap, 0,
885 sizeof usb_dev->bus->devmap.devicemap);
886 set_bit (devnum, usb_dev->bus->devmap.devicemap);
887 usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
889 mutex_lock(&usb_bus_list_lock);
891 usb_dev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
892 retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
893 if (retval != sizeof usb_dev->descriptor) {
894 mutex_unlock(&usb_bus_list_lock);
895 dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
896 usb_dev->dev.bus_id, retval);
897 return (retval < 0) ? retval : -EMSGSIZE;
900 retval = usb_new_device (usb_dev);
902 dev_err (parent_dev, "can't register root hub for %s, %d\n",
903 usb_dev->dev.bus_id, retval);
905 mutex_unlock(&usb_bus_list_lock);
908 spin_lock_irq (&hcd_root_hub_lock);
909 hcd->rh_registered = 1;
910 spin_unlock_irq (&hcd_root_hub_lock);
912 /* Did the HC die before the root hub was registered? */
913 if (hcd->state == HC_STATE_HALT)
914 usb_hc_died (hcd); /* This time clean up */
920 void usb_enable_root_hub_irq (struct usb_bus *bus)
924 hcd = container_of (bus, struct usb_hcd, self);
925 if (hcd->driver->hub_irq_enable && hcd->state != HC_STATE_HALT)
926 hcd->driver->hub_irq_enable (hcd);
930 /*-------------------------------------------------------------------------*/
933 * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
934 * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
935 * @is_input: true iff the transaction sends data to the host
936 * @isoc: true for isochronous transactions, false for interrupt ones
937 * @bytecount: how many bytes in the transaction.
939 * Returns approximate bus time in nanoseconds for a periodic transaction.
940 * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
941 * scheduled in software, this function is only used for such scheduling.
943 long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
948 case USB_SPEED_LOW: /* INTR only */
950 tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
951 return (64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp);
953 tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
954 return (64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp);
956 case USB_SPEED_FULL: /* ISOC or INTR */
958 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
959 return (((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp);
961 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
962 return (9107L + BW_HOST_DELAY + tmp);
964 case USB_SPEED_HIGH: /* ISOC or INTR */
965 // FIXME adjust for input vs output
967 tmp = HS_NSECS_ISO (bytecount);
969 tmp = HS_NSECS (bytecount);
972 pr_debug ("%s: bogus device speed!\n", usbcore_name);
976 EXPORT_SYMBOL (usb_calc_bus_time);
979 /*-------------------------------------------------------------------------*/
982 * Generic HC operations.
985 /*-------------------------------------------------------------------------*/
988 * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
989 * @hcd: host controller to which @urb was submitted
990 * @urb: URB being submitted
992 * Host controller drivers should call this routine in their enqueue()
993 * method. The HCD's private spinlock must be held and interrupts must
994 * be disabled. The actions carried out here are required for URB
995 * submission, as well as for endpoint shutdown and for usb_kill_urb.
997 * Returns 0 for no error, otherwise a negative error code (in which case
998 * the enqueue() method must fail). If no error occurs but enqueue() fails
999 * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
1000 * the private spinlock and returning.
1002 int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
1006 spin_lock(&hcd_urb_list_lock);
1008 /* Check that the URB isn't being killed */
1009 if (unlikely(urb->reject)) {
1014 if (unlikely(!urb->ep->enabled)) {
1020 * Check the host controller's state and add the URB to the
1023 switch (hcd->state) {
1024 case HC_STATE_RUNNING:
1025 case HC_STATE_RESUMING:
1027 list_add_tail(&urb->urb_list, &urb->ep->urb_list);
1034 spin_unlock(&hcd_urb_list_lock);
1037 EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
1040 * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
1041 * @hcd: host controller to which @urb was submitted
1042 * @urb: URB being checked for unlinkability
1043 * @status: error code to store in @urb if the unlink succeeds
1045 * Host controller drivers should call this routine in their dequeue()
1046 * method. The HCD's private spinlock must be held and interrupts must
1047 * be disabled. The actions carried out here are required for making
1048 * sure than an unlink is valid.
1050 * Returns 0 for no error, otherwise a negative error code (in which case
1051 * the dequeue() method must fail). The possible error codes are:
1053 * -EIDRM: @urb was not submitted or has already completed.
1054 * The completion function may not have been called yet.
1056 * -EBUSY: @urb has already been unlinked.
1058 int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
1061 struct list_head *tmp;
1063 /* insist the urb is still queued */
1064 list_for_each(tmp, &urb->ep->urb_list) {
1065 if (tmp == &urb->urb_list)
1068 if (tmp != &urb->urb_list)
1071 /* Any status except -EINPROGRESS means something already started to
1072 * unlink this URB from the hardware. So there's no more work to do.
1076 urb->unlinked = status;
1078 /* IRQ setup can easily be broken so that USB controllers
1079 * never get completion IRQs ... maybe even the ones we need to
1080 * finish unlinking the initial failed usb_set_address()
1081 * or device descriptor fetch.
1083 if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) &&
1084 !is_root_hub(urb->dev)) {
1085 dev_warn(hcd->self.controller, "Unlink after no-IRQ? "
1086 "Controller is probably using the wrong IRQ.\n");
1087 set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
1092 EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
1095 * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
1096 * @hcd: host controller to which @urb was submitted
1097 * @urb: URB being unlinked
1099 * Host controller drivers should call this routine before calling
1100 * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
1101 * interrupts must be disabled. The actions carried out here are required
1102 * for URB completion.
1104 void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
1106 /* clear all state linking urb to this dev (and hcd) */
1107 spin_lock(&hcd_urb_list_lock);
1108 list_del_init(&urb->urb_list);
1109 spin_unlock(&hcd_urb_list_lock);
1111 EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
1113 static void map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1115 /* Map the URB's buffers for DMA access.
1116 * Lower level HCD code should use *_dma exclusively,
1117 * unless it uses pio or talks to another transport.
1119 if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
1120 if (usb_endpoint_xfer_control(&urb->ep->desc)
1121 && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
1122 urb->setup_dma = dma_map_single (
1123 hcd->self.controller,
1125 sizeof (struct usb_ctrlrequest),
1127 if (urb->transfer_buffer_length != 0
1128 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
1129 urb->transfer_dma = dma_map_single (
1130 hcd->self.controller,
1131 urb->transfer_buffer,
1132 urb->transfer_buffer_length,
1139 static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1141 if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
1142 if (usb_endpoint_xfer_control(&urb->ep->desc)
1143 && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
1144 dma_unmap_single(hcd->self.controller, urb->setup_dma,
1145 sizeof(struct usb_ctrlrequest),
1147 if (urb->transfer_buffer_length != 0
1148 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
1149 dma_unmap_single(hcd->self.controller,
1151 urb->transfer_buffer_length,
1158 /*-------------------------------------------------------------------------*/
1160 /* may be called in any context with a valid urb->dev usecount
1161 * caller surrenders "ownership" of urb
1162 * expects usb_submit_urb() to have sanity checked and conditioned all
1165 int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
1168 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1170 /* increment urb's reference count as part of giving it to the HCD
1171 * (which will control it). HCD guarantees that it either returns
1172 * an error or calls giveback(), but not both.
1175 atomic_inc(&urb->use_count);
1176 usbmon_urb_submit(&hcd->self, urb);
1178 /* NOTE requirements on root-hub callers (usbfs and the hub
1179 * driver, for now): URBs' urb->transfer_buffer must be
1180 * valid and usb_buffer_{sync,unmap}() not be needed, since
1181 * they could clobber root hub response data. Also, control
1182 * URBs must be submitted in process context with interrupts
1185 map_urb_for_dma(hcd, urb);
1186 if (is_root_hub(urb->dev))
1187 status = rh_urb_enqueue(hcd, urb);
1189 status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
1191 if (unlikely(status)) {
1192 usbmon_urb_submit_error(&hcd->self, urb, status);
1193 unmap_urb_for_dma(hcd, urb);
1195 INIT_LIST_HEAD(&urb->urb_list);
1196 atomic_dec(&urb->use_count);
1198 wake_up(&usb_kill_urb_queue);
1204 /*-------------------------------------------------------------------------*/
1206 /* this makes the hcd giveback() the urb more quickly, by kicking it
1207 * off hardware queues (which may take a while) and returning it as
1208 * soon as practical. we've already set up the urb's return status,
1209 * but we can't know if the callback completed already.
1211 static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
1215 if (is_root_hub(urb->dev))
1216 value = usb_rh_urb_dequeue(hcd, urb, status);
1219 /* The only reason an HCD might fail this call is if
1220 * it has not yet fully queued the urb to begin with.
1221 * Such failures should be harmless. */
1222 value = hcd->driver->urb_dequeue(hcd, urb, status);
1228 * called in any context
1230 * caller guarantees urb won't be recycled till both unlink()
1231 * and the urb's completion function return
1233 int usb_hcd_unlink_urb (struct urb *urb, int status)
1235 struct usb_hcd *hcd;
1238 hcd = bus_to_hcd(urb->dev->bus);
1239 retval = unlink1(hcd, urb, status);
1242 retval = -EINPROGRESS;
1243 else if (retval != -EIDRM && retval != -EBUSY)
1244 dev_dbg(&urb->dev->dev, "hcd_unlink_urb %p fail %d\n",
1249 /*-------------------------------------------------------------------------*/
1252 * usb_hcd_giveback_urb - return URB from HCD to device driver
1253 * @hcd: host controller returning the URB
1254 * @urb: urb being returned to the USB device driver.
1255 * Context: in_interrupt()
1257 * This hands the URB from HCD to its USB device driver, using its
1258 * completion function. The HCD has freed all per-urb resources
1259 * (and is done using urb->hcpriv). It also released all HCD locks;
1260 * the device driver won't cause problems if it frees, modifies,
1261 * or resubmits this URB.
1263 * If @urb was unlinked, the value of @urb->status will be overridden by
1264 * @urb->unlinked. Erroneous short transfers are detected in case
1265 * the HCD hasn't checked for them.
1267 void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb)
1270 if (unlikely(urb->unlinked))
1271 urb->status = urb->unlinked;
1272 else if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
1273 urb->actual_length < urb->transfer_buffer_length &&
1275 urb->status = -EREMOTEIO;
1277 unmap_urb_for_dma(hcd, urb);
1278 usbmon_urb_complete(&hcd->self, urb);
1279 usb_unanchor_urb(urb);
1281 /* pass ownership to the completion handler */
1282 urb->complete (urb);
1283 atomic_dec (&urb->use_count);
1284 if (unlikely (urb->reject))
1285 wake_up (&usb_kill_urb_queue);
1288 EXPORT_SYMBOL (usb_hcd_giveback_urb);
1290 /*-------------------------------------------------------------------------*/
1292 /* disables the endpoint: cancels any pending urbs, then synchronizes with
1293 * the hcd to make sure all endpoint state is gone from hardware, and then
1294 * waits until the endpoint's queue is completely drained. use for
1295 * set_configuration, set_interface, driver removal, physical disconnect.
1297 * example: a qh stored in ep->hcpriv, holding state related to endpoint
1298 * type, maxpacket size, toggle, halt status, and scheduling.
1300 void usb_hcd_endpoint_disable (struct usb_device *udev,
1301 struct usb_host_endpoint *ep)
1303 struct usb_hcd *hcd;
1307 hcd = bus_to_hcd(udev->bus);
1309 /* ep is already gone from udev->ep_{in,out}[]; no more submits */
1311 spin_lock_irq(&hcd_urb_list_lock);
1312 list_for_each_entry (urb, &ep->urb_list, urb_list) {
1318 is_in = usb_urb_dir_in(urb);
1319 spin_unlock(&hcd_urb_list_lock);
1322 unlink1(hcd, urb, -ESHUTDOWN);
1323 dev_dbg (hcd->self.controller,
1324 "shutdown urb %p ep%d%s%s\n",
1325 urb, usb_endpoint_num(&ep->desc),
1326 is_in ? "in" : "out",
1329 switch (usb_endpoint_type(&ep->desc)) {
1330 case USB_ENDPOINT_XFER_CONTROL:
1332 case USB_ENDPOINT_XFER_BULK:
1334 case USB_ENDPOINT_XFER_INT:
1343 /* list contents may have changed */
1346 spin_unlock_irq(&hcd_urb_list_lock);
1348 /* synchronize with the hardware, so old configuration state
1349 * clears out immediately (and will be freed).
1351 if (hcd->driver->endpoint_disable)
1352 hcd->driver->endpoint_disable (hcd, ep);
1354 /* Wait until the endpoint queue is completely empty. Most HCDs
1355 * will have done this already in their endpoint_disable method,
1356 * but some might not. And there could be root-hub control URBs
1357 * still pending since they aren't affected by the HCDs'
1358 * endpoint_disable methods.
1360 while (!list_empty (&ep->urb_list)) {
1361 spin_lock_irq(&hcd_urb_list_lock);
1363 /* The list may have changed while we acquired the spinlock */
1365 if (!list_empty (&ep->urb_list)) {
1366 urb = list_entry (ep->urb_list.prev, struct urb,
1370 spin_unlock_irq(&hcd_urb_list_lock);
1379 /*-------------------------------------------------------------------------*/
1381 /* called in any context */
1382 int usb_hcd_get_frame_number (struct usb_device *udev)
1384 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
1386 if (!HC_IS_RUNNING (hcd->state))
1388 return hcd->driver->get_frame_number (hcd);
1391 /*-------------------------------------------------------------------------*/
1395 int hcd_bus_suspend(struct usb_device *rhdev)
1397 struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self);
1399 int old_state = hcd->state;
1401 dev_dbg(&rhdev->dev, "bus %s%s\n",
1402 rhdev->auto_pm ? "auto-" : "", "suspend");
1403 if (!hcd->driver->bus_suspend) {
1406 hcd->state = HC_STATE_QUIESCING;
1407 status = hcd->driver->bus_suspend(hcd);
1410 usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
1411 hcd->state = HC_STATE_SUSPENDED;
1413 hcd->state = old_state;
1414 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
1420 int hcd_bus_resume(struct usb_device *rhdev)
1422 struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self);
1424 int old_state = hcd->state;
1426 dev_dbg(&rhdev->dev, "usb %s%s\n",
1427 rhdev->auto_pm ? "auto-" : "", "resume");
1428 if (!hcd->driver->bus_resume)
1430 if (hcd->state == HC_STATE_RUNNING)
1433 hcd->state = HC_STATE_RESUMING;
1434 status = hcd->driver->bus_resume(hcd);
1436 /* TRSMRCY = 10 msec */
1438 usb_set_device_state(rhdev, rhdev->actconfig
1439 ? USB_STATE_CONFIGURED
1440 : USB_STATE_ADDRESS);
1441 hcd->state = HC_STATE_RUNNING;
1443 hcd->state = old_state;
1444 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
1446 if (status != -ESHUTDOWN)
1452 /* Workqueue routine for root-hub remote wakeup */
1453 static void hcd_resume_work(struct work_struct *work)
1455 struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
1456 struct usb_device *udev = hcd->self.root_hub;
1458 usb_lock_device(udev);
1459 usb_mark_last_busy(udev);
1460 usb_external_resume_device(udev);
1461 usb_unlock_device(udev);
1465 * usb_hcd_resume_root_hub - called by HCD to resume its root hub
1466 * @hcd: host controller for this root hub
1468 * The USB host controller calls this function when its root hub is
1469 * suspended (with the remote wakeup feature enabled) and a remote
1470 * wakeup request is received. The routine submits a workqueue request
1471 * to resume the root hub (that is, manage its downstream ports again).
1473 void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
1475 unsigned long flags;
1477 spin_lock_irqsave (&hcd_root_hub_lock, flags);
1478 if (hcd->rh_registered)
1479 queue_work(ksuspend_usb_wq, &hcd->wakeup_work);
1480 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
1482 EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
1486 /*-------------------------------------------------------------------------*/
1488 #ifdef CONFIG_USB_OTG
1491 * usb_bus_start_enum - start immediate enumeration (for OTG)
1492 * @bus: the bus (must use hcd framework)
1493 * @port_num: 1-based number of port; usually bus->otg_port
1494 * Context: in_interrupt()
1496 * Starts enumeration, with an immediate reset followed later by
1497 * khubd identifying and possibly configuring the device.
1498 * This is needed by OTG controller drivers, where it helps meet
1499 * HNP protocol timing requirements for starting a port reset.
1501 int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
1503 struct usb_hcd *hcd;
1504 int status = -EOPNOTSUPP;
1506 /* NOTE: since HNP can't start by grabbing the bus's address0_sem,
1507 * boards with root hubs hooked up to internal devices (instead of
1508 * just the OTG port) may need more attention to resetting...
1510 hcd = container_of (bus, struct usb_hcd, self);
1511 if (port_num && hcd->driver->start_port_reset)
1512 status = hcd->driver->start_port_reset(hcd, port_num);
1514 /* run khubd shortly after (first) root port reset finishes;
1515 * it may issue others, until at least 50 msecs have passed.
1518 mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
1521 EXPORT_SYMBOL (usb_bus_start_enum);
1525 /*-------------------------------------------------------------------------*/
1528 * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
1529 * @irq: the IRQ being raised
1530 * @__hcd: pointer to the HCD whose IRQ is being signaled
1531 * @r: saved hardware registers
1533 * If the controller isn't HALTed, calls the driver's irq handler.
1534 * Checks whether the controller is now dead.
1536 irqreturn_t usb_hcd_irq (int irq, void *__hcd)
1538 struct usb_hcd *hcd = __hcd;
1539 int start = hcd->state;
1541 if (unlikely(start == HC_STATE_HALT ||
1542 !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
1544 if (hcd->driver->irq (hcd) == IRQ_NONE)
1547 set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
1549 if (unlikely(hcd->state == HC_STATE_HALT))
1554 /*-------------------------------------------------------------------------*/
1557 * usb_hc_died - report abnormal shutdown of a host controller (bus glue)
1558 * @hcd: pointer to the HCD representing the controller
1560 * This is called by bus glue to report a USB host controller that died
1561 * while operations may still have been pending. It's called automatically
1562 * by the PCI glue, so only glue for non-PCI busses should need to call it.
1564 void usb_hc_died (struct usb_hcd *hcd)
1566 unsigned long flags;
1568 dev_err (hcd->self.controller, "HC died; cleaning up\n");
1570 spin_lock_irqsave (&hcd_root_hub_lock, flags);
1571 if (hcd->rh_registered) {
1574 /* make khubd clean up old urbs and devices */
1575 usb_set_device_state (hcd->self.root_hub,
1576 USB_STATE_NOTATTACHED);
1577 usb_kick_khubd (hcd->self.root_hub);
1579 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
1581 EXPORT_SYMBOL_GPL (usb_hc_died);
1583 /*-------------------------------------------------------------------------*/
1586 * usb_create_hcd - create and initialize an HCD structure
1587 * @driver: HC driver that will use this hcd
1588 * @dev: device for this HC, stored in hcd->self.controller
1589 * @bus_name: value to store in hcd->self.bus_name
1590 * Context: !in_interrupt()
1592 * Allocate a struct usb_hcd, with extra space at the end for the
1593 * HC driver's private data. Initialize the generic members of the
1596 * If memory is unavailable, returns NULL.
1598 struct usb_hcd *usb_create_hcd (const struct hc_driver *driver,
1599 struct device *dev, char *bus_name)
1601 struct usb_hcd *hcd;
1603 hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
1605 dev_dbg (dev, "hcd alloc failed\n");
1608 dev_set_drvdata(dev, hcd);
1609 kref_init(&hcd->kref);
1611 usb_bus_init(&hcd->self);
1612 hcd->self.controller = dev;
1613 hcd->self.bus_name = bus_name;
1614 hcd->self.uses_dma = (dev->dma_mask != NULL);
1616 init_timer(&hcd->rh_timer);
1617 hcd->rh_timer.function = rh_timer_func;
1618 hcd->rh_timer.data = (unsigned long) hcd;
1620 INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
1623 hcd->driver = driver;
1624 hcd->product_desc = (driver->product_desc) ? driver->product_desc :
1625 "USB Host Controller";
1628 EXPORT_SYMBOL (usb_create_hcd);
1630 static void hcd_release (struct kref *kref)
1632 struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
1637 struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
1640 kref_get (&hcd->kref);
1643 EXPORT_SYMBOL (usb_get_hcd);
1645 void usb_put_hcd (struct usb_hcd *hcd)
1648 kref_put (&hcd->kref, hcd_release);
1650 EXPORT_SYMBOL (usb_put_hcd);
1653 * usb_add_hcd - finish generic HCD structure initialization and register
1654 * @hcd: the usb_hcd structure to initialize
1655 * @irqnum: Interrupt line to allocate
1656 * @irqflags: Interrupt type flags
1658 * Finish the remaining parts of generic HCD initialization: allocate the
1659 * buffers of consistent memory, register the bus, request the IRQ line,
1660 * and call the driver's reset() and start() routines.
1662 int usb_add_hcd(struct usb_hcd *hcd,
1663 unsigned int irqnum, unsigned long irqflags)
1666 struct usb_device *rhdev;
1668 dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
1670 hcd->authorized_default = hcd->wireless? 0 : 1;
1671 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
1673 /* HC is in reset state, but accessible. Now do the one-time init,
1674 * bottom up so that hcds can customize the root hubs before khubd
1675 * starts talking to them. (Note, bus id is assigned early too.)
1677 if ((retval = hcd_buffer_create(hcd)) != 0) {
1678 dev_dbg(hcd->self.controller, "pool alloc failed\n");
1682 if ((retval = usb_register_bus(&hcd->self)) < 0)
1683 goto err_register_bus;
1685 if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
1686 dev_err(hcd->self.controller, "unable to allocate root hub\n");
1688 goto err_allocate_root_hub;
1690 rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH :
1692 hcd->self.root_hub = rhdev;
1694 /* wakeup flag init defaults to "everything works" for root hubs,
1695 * but drivers can override it in reset() if needed, along with
1696 * recording the overall controller's system wakeup capability.
1698 device_init_wakeup(&rhdev->dev, 1);
1700 /* "reset" is misnamed; its role is now one-time init. the controller
1701 * should already have been reset (and boot firmware kicked off etc).
1703 if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
1704 dev_err(hcd->self.controller, "can't setup\n");
1705 goto err_hcd_driver_setup;
1708 /* NOTE: root hub and controller capabilities may not be the same */
1709 if (device_can_wakeup(hcd->self.controller)
1710 && device_can_wakeup(&hcd->self.root_hub->dev))
1711 dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
1713 /* enable irqs just before we start the controller */
1714 if (hcd->driver->irq) {
1715 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
1716 hcd->driver->description, hcd->self.busnum);
1717 if ((retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
1718 hcd->irq_descr, hcd)) != 0) {
1719 dev_err(hcd->self.controller,
1720 "request interrupt %d failed\n", irqnum);
1721 goto err_request_irq;
1724 dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
1725 (hcd->driver->flags & HCD_MEMORY) ?
1726 "io mem" : "io base",
1727 (unsigned long long)hcd->rsrc_start);
1730 if (hcd->rsrc_start)
1731 dev_info(hcd->self.controller, "%s 0x%08llx\n",
1732 (hcd->driver->flags & HCD_MEMORY) ?
1733 "io mem" : "io base",
1734 (unsigned long long)hcd->rsrc_start);
1737 if ((retval = hcd->driver->start(hcd)) < 0) {
1738 dev_err(hcd->self.controller, "startup error %d\n", retval);
1739 goto err_hcd_driver_start;
1742 /* starting here, usbcore will pay attention to this root hub */
1743 rhdev->bus_mA = min(500u, hcd->power_budget);
1744 if ((retval = register_root_hub(hcd)) != 0)
1745 goto err_register_root_hub;
1747 retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group);
1749 printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n",
1751 goto error_create_attr_group;
1753 if (hcd->uses_new_polling && hcd->poll_rh)
1754 usb_hcd_poll_rh_status(hcd);
1757 error_create_attr_group:
1758 mutex_lock(&usb_bus_list_lock);
1759 usb_disconnect(&hcd->self.root_hub);
1760 mutex_unlock(&usb_bus_list_lock);
1761 err_register_root_hub:
1762 hcd->driver->stop(hcd);
1763 err_hcd_driver_start:
1765 free_irq(irqnum, hcd);
1767 err_hcd_driver_setup:
1768 hcd->self.root_hub = NULL;
1770 err_allocate_root_hub:
1771 usb_deregister_bus(&hcd->self);
1773 hcd_buffer_destroy(hcd);
1776 EXPORT_SYMBOL (usb_add_hcd);
1779 * usb_remove_hcd - shutdown processing for generic HCDs
1780 * @hcd: the usb_hcd structure to remove
1781 * Context: !in_interrupt()
1783 * Disconnects the root hub, then reverses the effects of usb_add_hcd(),
1784 * invoking the HCD's stop() method.
1786 void usb_remove_hcd(struct usb_hcd *hcd)
1788 dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
1790 if (HC_IS_RUNNING (hcd->state))
1791 hcd->state = HC_STATE_QUIESCING;
1793 dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
1794 spin_lock_irq (&hcd_root_hub_lock);
1795 hcd->rh_registered = 0;
1796 spin_unlock_irq (&hcd_root_hub_lock);
1799 cancel_work_sync(&hcd->wakeup_work);
1802 sysfs_remove_group(&hcd->self.root_hub->dev.kobj, &usb_bus_attr_group);
1803 mutex_lock(&usb_bus_list_lock);
1804 usb_disconnect(&hcd->self.root_hub);
1805 mutex_unlock(&usb_bus_list_lock);
1807 hcd->driver->stop(hcd);
1808 hcd->state = HC_STATE_HALT;
1811 del_timer_sync(&hcd->rh_timer);
1814 free_irq(hcd->irq, hcd);
1815 usb_deregister_bus(&hcd->self);
1816 hcd_buffer_destroy(hcd);
1818 EXPORT_SYMBOL (usb_remove_hcd);
1821 usb_hcd_platform_shutdown(struct platform_device* dev)
1823 struct usb_hcd *hcd = platform_get_drvdata(dev);
1825 if (hcd->driver->shutdown)
1826 hcd->driver->shutdown(hcd);
1828 EXPORT_SYMBOL (usb_hcd_platform_shutdown);
1830 /*-------------------------------------------------------------------------*/
1832 #if defined(CONFIG_USB_MON)
1834 struct usb_mon_operations *mon_ops;
1837 * The registration is unlocked.
1838 * We do it this way because we do not want to lock in hot paths.
1840 * Notice that the code is minimally error-proof. Because usbmon needs
1841 * symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
1844 int usb_mon_register (struct usb_mon_operations *ops)
1854 EXPORT_SYMBOL_GPL (usb_mon_register);
1856 void usb_mon_deregister (void)
1859 if (mon_ops == NULL) {
1860 printk(KERN_ERR "USB: monitor was not registered\n");
1866 EXPORT_SYMBOL_GPL (usb_mon_deregister);
1868 #endif /* CONFIG_USB_MON */