2 * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family
3 * of PCI-SCSI IO processors.
5 * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr>
6 * Copyright (c) 2003-2005 Matthew Wilcox <matthew@wil.cx>
8 * This driver is derived from the Linux sym53c8xx driver.
9 * Copyright (C) 1998-2000 Gerard Roudier
11 * The sym53c8xx driver is derived from the ncr53c8xx driver that had been
12 * a port of the FreeBSD ncr driver to Linux-1.2.13.
14 * The original ncr driver has been written for 386bsd and FreeBSD by
15 * Wolfgang Stanglmeier <wolf@cologne.de>
16 * Stefan Esser <se@mi.Uni-Koeln.de>
17 * Copyright (C) 1994 Wolfgang Stanglmeier
19 * Other major contributions:
21 * NVRAM detection and reading.
22 * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
24 *-----------------------------------------------------------------------------
26 * This program is free software; you can redistribute it and/or modify
27 * it under the terms of the GNU General Public License as published by
28 * the Free Software Foundation; either version 2 of the License, or
29 * (at your option) any later version.
31 * This program is distributed in the hope that it will be useful,
32 * but WITHOUT ANY WARRANTY; without even the implied warranty of
33 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
34 * GNU General Public License for more details.
36 * You should have received a copy of the GNU General Public License
37 * along with this program; if not, write to the Free Software
38 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
41 #include <linux/slab.h>
44 #include "sym_nvram.h"
47 #define SYM_DEBUG_GENERIC_SUPPORT
51 * Needed function prototypes.
53 static void sym_int_ma (struct sym_hcb *np);
54 static void sym_int_sir (struct sym_hcb *np);
55 static struct sym_ccb *sym_alloc_ccb(struct sym_hcb *np);
56 static struct sym_ccb *sym_ccb_from_dsa(struct sym_hcb *np, u32 dsa);
57 static void sym_alloc_lcb_tags (struct sym_hcb *np, u_char tn, u_char ln);
58 static void sym_complete_error (struct sym_hcb *np, struct sym_ccb *cp);
59 static void sym_complete_ok (struct sym_hcb *np, struct sym_ccb *cp);
60 static int sym_compute_residual(struct sym_hcb *np, struct sym_ccb *cp);
63 * Print a buffer in hexadecimal format with a ".\n" at end.
65 static void sym_printl_hex(u_char *p, int n)
73 * Print out the content of a SCSI message.
75 static int sym_show_msg (u_char * msg)
79 if (*msg==M_EXTENDED) {
81 if (i-1>msg[1]) break;
82 printf ("-%x",msg[i]);
85 } else if ((*msg & 0xf0) == 0x20) {
86 printf ("-%x",msg[1]);
92 static void sym_print_msg(struct sym_ccb *cp, char *label, u_char *msg)
94 sym_print_addr(cp->cmd, "%s: ", label);
100 static void sym_print_nego_msg(struct sym_hcb *np, int target, char *label, u_char *msg)
102 struct sym_tcb *tp = &np->target[target];
103 dev_info(&tp->starget->dev, "%s: ", label);
110 * Print something that tells about extended errors.
112 void sym_print_xerr(struct scsi_cmnd *cmd, int x_status)
114 if (x_status & XE_PARITY_ERR) {
115 sym_print_addr(cmd, "unrecovered SCSI parity error.\n");
117 if (x_status & XE_EXTRA_DATA) {
118 sym_print_addr(cmd, "extraneous data discarded.\n");
120 if (x_status & XE_BAD_PHASE) {
121 sym_print_addr(cmd, "illegal scsi phase (4/5).\n");
123 if (x_status & XE_SODL_UNRUN) {
124 sym_print_addr(cmd, "ODD transfer in DATA OUT phase.\n");
126 if (x_status & XE_SWIDE_OVRUN) {
127 sym_print_addr(cmd, "ODD transfer in DATA IN phase.\n");
132 * Return a string for SCSI BUS mode.
134 static char *sym_scsi_bus_mode(int mode)
137 case SMODE_HVD: return "HVD";
138 case SMODE_SE: return "SE";
139 case SMODE_LVD: return "LVD";
145 * Soft reset the chip.
147 * Raising SRST when the chip is running may cause
148 * problems on dual function chips (see below).
149 * On the other hand, LVD devices need some delay
150 * to settle and report actual BUS mode in STEST4.
152 static void sym_chip_reset (struct sym_hcb *np)
154 OUTB(np, nc_istat, SRST);
157 OUTB(np, nc_istat, 0);
159 udelay(2000); /* For BUS MODE to settle */
163 * Really soft reset the chip.:)
165 * Some 896 and 876 chip revisions may hang-up if we set
166 * the SRST (soft reset) bit at the wrong time when SCRIPTS
168 * So, we need to abort the current operation prior to
169 * soft resetting the chip.
171 static void sym_soft_reset (struct sym_hcb *np)
176 if (!(np->features & FE_ISTAT1) || !(INB(np, nc_istat1) & SCRUN))
179 OUTB(np, nc_istat, CABRT);
180 for (i = 100000 ; i ; --i) {
181 istat = INB(np, nc_istat);
185 else if (istat & DIP) {
186 if (INB(np, nc_dstat) & ABRT)
191 OUTB(np, nc_istat, 0);
193 printf("%s: unable to abort current chip operation, "
194 "ISTAT=0x%02x.\n", sym_name(np), istat);
200 * Start reset process.
202 * The interrupt handler will reinitialize the chip.
204 static void sym_start_reset(struct sym_hcb *np)
206 sym_reset_scsi_bus(np, 1);
209 int sym_reset_scsi_bus(struct sym_hcb *np, int enab_int)
214 sym_soft_reset(np); /* Soft reset the chip */
216 OUTW(np, nc_sien, RST);
218 * Enable Tolerant, reset IRQD if present and
219 * properly set IRQ mode, prior to resetting the bus.
221 OUTB(np, nc_stest3, TE);
222 OUTB(np, nc_dcntl, (np->rv_dcntl & IRQM));
223 OUTB(np, nc_scntl1, CRST);
227 if (!SYM_SETUP_SCSI_BUS_CHECK)
230 * Check for no terminators or SCSI bus shorts to ground.
231 * Read SCSI data bus, data parity bits and control signals.
232 * We are expecting RESET to be TRUE and other signals to be
235 term = INB(np, nc_sstat0);
236 term = ((term & 2) << 7) + ((term & 1) << 17); /* rst sdp0 */
237 term |= ((INB(np, nc_sstat2) & 0x01) << 26) | /* sdp1 */
238 ((INW(np, nc_sbdl) & 0xff) << 9) | /* d7-0 */
239 ((INW(np, nc_sbdl) & 0xff00) << 10) | /* d15-8 */
240 INB(np, nc_sbcl); /* req ack bsy sel atn msg cd io */
245 if (term != (2<<7)) {
246 printf("%s: suspicious SCSI data while resetting the BUS.\n",
248 printf("%s: %sdp0,d7-0,rst,req,ack,bsy,sel,atn,msg,c/d,i/o = "
249 "0x%lx, expecting 0x%lx\n",
251 (np->features & FE_WIDE) ? "dp1,d15-8," : "",
252 (u_long)term, (u_long)(2<<7));
253 if (SYM_SETUP_SCSI_BUS_CHECK == 1)
257 OUTB(np, nc_scntl1, 0);
262 * Select SCSI clock frequency
264 static void sym_selectclock(struct sym_hcb *np, u_char scntl3)
267 * If multiplier not present or not selected, leave here.
269 if (np->multiplier <= 1) {
270 OUTB(np, nc_scntl3, scntl3);
274 if (sym_verbose >= 2)
275 printf ("%s: enabling clock multiplier\n", sym_name(np));
277 OUTB(np, nc_stest1, DBLEN); /* Enable clock multiplier */
279 * Wait for the LCKFRQ bit to be set if supported by the chip.
280 * Otherwise wait 50 micro-seconds (at least).
282 if (np->features & FE_LCKFRQ) {
284 while (!(INB(np, nc_stest4) & LCKFRQ) && --i > 0)
287 printf("%s: the chip cannot lock the frequency\n",
293 OUTB(np, nc_stest3, HSC); /* Halt the scsi clock */
294 OUTB(np, nc_scntl3, scntl3);
295 OUTB(np, nc_stest1, (DBLEN|DBLSEL));/* Select clock multiplier */
296 OUTB(np, nc_stest3, 0x00); /* Restart scsi clock */
301 * Determine the chip's clock frequency.
303 * This is essential for the negotiation of the synchronous
306 * Note: we have to return the correct value.
307 * THERE IS NO SAFE DEFAULT VALUE.
309 * Most NCR/SYMBIOS boards are delivered with a 40 Mhz clock.
310 * 53C860 and 53C875 rev. 1 support fast20 transfers but
311 * do not have a clock doubler and so are provided with a
312 * 80 MHz clock. All other fast20 boards incorporate a doubler
313 * and so should be delivered with a 40 MHz clock.
314 * The recent fast40 chips (895/896/895A/1010) use a 40 Mhz base
315 * clock and provide a clock quadrupler (160 Mhz).
319 * calculate SCSI clock frequency (in KHz)
321 static unsigned getfreq (struct sym_hcb *np, int gen)
327 * Measure GEN timer delay in order
328 * to calculate SCSI clock frequency
330 * This code will never execute too
331 * many loop iterations (if DELAY is
332 * reasonably correct). It could get
333 * too low a delay (too high a freq.)
334 * if the CPU is slow executing the
335 * loop for some reason (an NMI, for
336 * example). For this reason we will
337 * if multiple measurements are to be
338 * performed trust the higher delay
339 * (lower frequency returned).
341 OUTW(np, nc_sien, 0); /* mask all scsi interrupts */
342 INW(np, nc_sist); /* clear pending scsi interrupt */
343 OUTB(np, nc_dien, 0); /* mask all dma interrupts */
344 INW(np, nc_sist); /* another one, just to be sure :) */
346 * The C1010-33 core does not report GEN in SIST,
347 * if this interrupt is masked in SIEN.
348 * I don't know yet if the C1010-66 behaves the same way.
350 if (np->features & FE_C10) {
351 OUTW(np, nc_sien, GEN);
352 OUTB(np, nc_istat1, SIRQD);
354 OUTB(np, nc_scntl3, 4); /* set pre-scaler to divide by 3 */
355 OUTB(np, nc_stime1, 0); /* disable general purpose timer */
356 OUTB(np, nc_stime1, gen); /* set to nominal delay of 1<<gen * 125us */
357 while (!(INW(np, nc_sist) & GEN) && ms++ < 100000)
358 udelay(1000/4); /* count in 1/4 of ms */
359 OUTB(np, nc_stime1, 0); /* disable general purpose timer */
361 * Undo C1010-33 specific settings.
363 if (np->features & FE_C10) {
364 OUTW(np, nc_sien, 0);
365 OUTB(np, nc_istat1, 0);
368 * set prescaler to divide by whatever 0 means
369 * 0 ought to choose divide by 2, but appears
370 * to set divide by 3.5 mode in my 53c810 ...
372 OUTB(np, nc_scntl3, 0);
375 * adjust for prescaler, and convert into KHz
377 f = ms ? ((1 << gen) * (4340*4)) / ms : 0;
380 * The C1010-33 result is biased by a factor
381 * of 2/3 compared to earlier chips.
383 if (np->features & FE_C10)
386 if (sym_verbose >= 2)
387 printf ("%s: Delay (GEN=%d): %u msec, %u KHz\n",
388 sym_name(np), gen, ms/4, f);
393 static unsigned sym_getfreq (struct sym_hcb *np)
398 getfreq (np, gen); /* throw away first result */
399 f1 = getfreq (np, gen);
400 f2 = getfreq (np, gen);
401 if (f1 > f2) f1 = f2; /* trust lower result */
406 * Get/probe chip SCSI clock frequency
408 static void sym_getclock (struct sym_hcb *np, int mult)
410 unsigned char scntl3 = np->sv_scntl3;
411 unsigned char stest1 = np->sv_stest1;
417 * True with 875/895/896/895A with clock multiplier selected
419 if (mult > 1 && (stest1 & (DBLEN+DBLSEL)) == DBLEN+DBLSEL) {
420 if (sym_verbose >= 2)
421 printf ("%s: clock multiplier found\n", sym_name(np));
422 np->multiplier = mult;
426 * If multiplier not found or scntl3 not 7,5,3,
427 * reset chip and get frequency from general purpose timer.
428 * Otherwise trust scntl3 BIOS setting.
430 if (np->multiplier != mult || (scntl3 & 7) < 3 || !(scntl3 & 1)) {
431 OUTB(np, nc_stest1, 0); /* make sure doubler is OFF */
432 f1 = sym_getfreq (np);
435 printf ("%s: chip clock is %uKHz\n", sym_name(np), f1);
437 if (f1 < 45000) f1 = 40000;
438 else if (f1 < 55000) f1 = 50000;
441 if (f1 < 80000 && mult > 1) {
442 if (sym_verbose >= 2)
443 printf ("%s: clock multiplier assumed\n",
445 np->multiplier = mult;
448 if ((scntl3 & 7) == 3) f1 = 40000;
449 else if ((scntl3 & 7) == 5) f1 = 80000;
452 f1 /= np->multiplier;
456 * Compute controller synchronous parameters.
458 f1 *= np->multiplier;
463 * Get/probe PCI clock frequency
465 static int sym_getpciclock (struct sym_hcb *np)
470 * For now, we only need to know about the actual
471 * PCI BUS clock frequency for C1010-66 chips.
474 if (np->features & FE_66MHZ) {
478 OUTB(np, nc_stest1, SCLK); /* Use the PCI clock as SCSI clock */
480 OUTB(np, nc_stest1, 0);
488 * SYMBIOS chip clock divisor table.
490 * Divisors are multiplied by 10,000,000 in order to make
491 * calculations more simple.
494 static u32 div_10M[] = {2*_5M, 3*_5M, 4*_5M, 6*_5M, 8*_5M, 12*_5M, 16*_5M};
497 * Get clock factor and sync divisor for a given
498 * synchronous factor period.
501 sym_getsync(struct sym_hcb *np, u_char dt, u_char sfac, u_char *divp, u_char *fakp)
503 u32 clk = np->clock_khz; /* SCSI clock frequency in kHz */
504 int div = np->clock_divn; /* Number of divisors supported */
505 u32 fak; /* Sync factor in sxfer */
506 u32 per; /* Period in tenths of ns */
507 u32 kpc; /* (per * clk) */
511 * Compute the synchronous period in tenths of nano-seconds
513 if (dt && sfac <= 9) per = 125;
514 else if (sfac <= 10) per = 250;
515 else if (sfac == 11) per = 303;
516 else if (sfac == 12) per = 500;
517 else per = 40 * sfac;
525 * For earliest C10 revision 0, we cannot use extra
526 * clocks for the setting of the SCSI clocking.
527 * Note that this limits the lowest sync data transfer
528 * to 5 Mega-transfers per second and may result in
529 * using higher clock divisors.
532 if ((np->features & (FE_C10|FE_U3EN)) == FE_C10) {
534 * Look for the lowest clock divisor that allows an
535 * output speed not faster than the period.
539 if (kpc > (div_10M[div] << 2)) {
544 fak = 0; /* No extra clocks */
545 if (div == np->clock_divn) { /* Are we too fast ? */
555 * Look for the greatest clock divisor that allows an
556 * input speed faster than the period.
559 if (kpc >= (div_10M[div] << 2)) break;
562 * Calculate the lowest clock factor that allows an output
563 * speed not faster than the period, and the max output speed.
564 * If fak >= 1 we will set both XCLKH_ST and XCLKH_DT.
565 * If fak >= 2 we will also set XCLKS_ST and XCLKS_DT.
568 fak = (kpc - 1) / (div_10M[div] << 1) + 1 - 2;
569 /* ret = ((2+fak)*div_10M[div])/np->clock_khz; */
571 fak = (kpc - 1) / div_10M[div] + 1 - 4;
572 /* ret = ((4+fak)*div_10M[div])/np->clock_khz; */
576 * Check against our hardware limits, or bugs :).
584 * Compute and return sync parameters.
593 * SYMBIOS chips allow burst lengths of 2, 4, 8, 16, 32, 64,
594 * 128 transfers. All chips support at least 16 transfers
595 * bursts. The 825A, 875 and 895 chips support bursts of up
596 * to 128 transfers and the 895A and 896 support bursts of up
597 * to 64 transfers. All other chips support up to 16
600 * For PCI 32 bit data transfers each transfer is a DWORD.
601 * It is a QUADWORD (8 bytes) for PCI 64 bit data transfers.
603 * We use log base 2 (burst length) as internal code, with
604 * value 0 meaning "burst disabled".
608 * Burst length from burst code.
610 #define burst_length(bc) (!(bc))? 0 : 1 << (bc)
613 * Burst code from io register bits.
615 #define burst_code(dmode, ctest4, ctest5) \
616 (ctest4) & 0x80? 0 : (((dmode) & 0xc0) >> 6) + ((ctest5) & 0x04) + 1
619 * Set initial io register bits from burst code.
621 static __inline void sym_init_burst(struct sym_hcb *np, u_char bc)
623 np->rv_ctest4 &= ~0x80;
624 np->rv_dmode &= ~(0x3 << 6);
625 np->rv_ctest5 &= ~0x4;
628 np->rv_ctest4 |= 0x80;
632 np->rv_dmode |= ((bc & 0x3) << 6);
633 np->rv_ctest5 |= (bc & 0x4);
639 * Print out the list of targets that have some flag disabled by user.
641 static void sym_print_targets_flag(struct sym_hcb *np, int mask, char *msg)
646 for (cnt = 0, i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) {
649 if (np->target[i].usrflags & mask) {
651 printf("%s: %s disabled for targets",
661 * Save initial settings of some IO registers.
662 * Assumed to have been set by BIOS.
663 * We cannot reset the chip prior to reading the
664 * IO registers, since informations will be lost.
665 * Since the SCRIPTS processor may be running, this
666 * is not safe on paper, but it seems to work quite
669 static void sym_save_initial_setting (struct sym_hcb *np)
671 np->sv_scntl0 = INB(np, nc_scntl0) & 0x0a;
672 np->sv_scntl3 = INB(np, nc_scntl3) & 0x07;
673 np->sv_dmode = INB(np, nc_dmode) & 0xce;
674 np->sv_dcntl = INB(np, nc_dcntl) & 0xa8;
675 np->sv_ctest3 = INB(np, nc_ctest3) & 0x01;
676 np->sv_ctest4 = INB(np, nc_ctest4) & 0x80;
677 np->sv_gpcntl = INB(np, nc_gpcntl);
678 np->sv_stest1 = INB(np, nc_stest1);
679 np->sv_stest2 = INB(np, nc_stest2) & 0x20;
680 np->sv_stest4 = INB(np, nc_stest4);
681 if (np->features & FE_C10) { /* Always large DMA fifo + ultra3 */
682 np->sv_scntl4 = INB(np, nc_scntl4);
683 np->sv_ctest5 = INB(np, nc_ctest5) & 0x04;
686 np->sv_ctest5 = INB(np, nc_ctest5) & 0x24;
690 * Prepare io register values used by sym_start_up()
691 * according to selected and supported features.
693 static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, struct sym_nvram *nvram)
702 np->maxwide = (np->features & FE_WIDE)? 1 : 0;
705 * Guess the frequency of the chip's clock.
707 if (np->features & (FE_ULTRA3 | FE_ULTRA2))
708 np->clock_khz = 160000;
709 else if (np->features & FE_ULTRA)
710 np->clock_khz = 80000;
712 np->clock_khz = 40000;
715 * Get the clock multiplier factor.
717 if (np->features & FE_QUAD)
719 else if (np->features & FE_DBLR)
725 * Measure SCSI clock frequency for chips
726 * it may vary from assumed one.
728 if (np->features & FE_VARCLK)
729 sym_getclock(np, np->multiplier);
732 * Divisor to be used for async (timer pre-scaler).
734 i = np->clock_divn - 1;
736 if (10ul * SYM_CONF_MIN_ASYNC * np->clock_khz > div_10M[i]) {
744 * The C1010 uses hardwired divisors for async.
745 * So, we just throw away, the async. divisor.:-)
747 if (np->features & FE_C10)
751 * Minimum synchronous period factor supported by the chip.
752 * Btw, 'period' is in tenths of nanoseconds.
754 period = (4 * div_10M[0] + np->clock_khz - 1) / np->clock_khz;
756 if (period <= 250) np->minsync = 10;
757 else if (period <= 303) np->minsync = 11;
758 else if (period <= 500) np->minsync = 12;
759 else np->minsync = (period + 40 - 1) / 40;
762 * Check against chip SCSI standard support (SCSI-2,ULTRA,ULTRA2).
764 if (np->minsync < 25 &&
765 !(np->features & (FE_ULTRA|FE_ULTRA2|FE_ULTRA3)))
767 else if (np->minsync < 12 &&
768 !(np->features & (FE_ULTRA2|FE_ULTRA3)))
772 * Maximum synchronous period factor supported by the chip.
774 period = (11 * div_10M[np->clock_divn - 1]) / (4 * np->clock_khz);
775 np->maxsync = period > 2540 ? 254 : period / 10;
778 * If chip is a C1010, guess the sync limits in DT mode.
780 if ((np->features & (FE_C10|FE_ULTRA3)) == (FE_C10|FE_ULTRA3)) {
781 if (np->clock_khz == 160000) {
784 np->maxoffs_dt = nvram->type ? 62 : 31;
789 * 64 bit addressing (895A/896/1010) ?
791 if (np->features & FE_DAC) {
792 #if SYM_CONF_DMA_ADDRESSING_MODE == 0
793 np->rv_ccntl1 |= (DDAC);
794 #elif SYM_CONF_DMA_ADDRESSING_MODE == 1
796 np->rv_ccntl1 |= (DDAC);
798 np->rv_ccntl1 |= (XTIMOD | EXTIBMV);
799 #elif SYM_CONF_DMA_ADDRESSING_MODE == 2
801 np->rv_ccntl1 |= (DDAC);
803 np->rv_ccntl1 |= (0 | EXTIBMV);
808 * Phase mismatch handled by SCRIPTS (895A/896/1010) ?
810 if (np->features & FE_NOPM)
811 np->rv_ccntl0 |= (ENPMJ);
814 * C1010-33 Errata: Part Number:609-039638 (rev. 1) is fixed.
815 * In dual channel mode, contention occurs if internal cycles
816 * are used. Disable internal cycles.
818 if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
819 np->revision_id < 0x1)
820 np->rv_ccntl0 |= DILS;
823 * Select burst length (dwords)
825 burst_max = SYM_SETUP_BURST_ORDER;
826 if (burst_max == 255)
827 burst_max = burst_code(np->sv_dmode, np->sv_ctest4,
831 if (burst_max > np->maxburst)
832 burst_max = np->maxburst;
835 * DEL 352 - 53C810 Rev x11 - Part Number 609-0392140 - ITEM 2.
836 * This chip and the 860 Rev 1 may wrongly use PCI cache line
837 * based transactions on LOAD/STORE instructions. So we have
838 * to prevent these chips from using such PCI transactions in
839 * this driver. The generic ncr driver that does not use
840 * LOAD/STORE instructions does not need this work-around.
842 if ((np->device_id == PCI_DEVICE_ID_NCR_53C810 &&
843 np->revision_id >= 0x10 && np->revision_id <= 0x11) ||
844 (np->device_id == PCI_DEVICE_ID_NCR_53C860 &&
845 np->revision_id <= 0x1))
846 np->features &= ~(FE_WRIE|FE_ERL|FE_ERMP);
849 * Select all supported special features.
850 * If we are using on-board RAM for scripts, prefetch (PFEN)
851 * does not help, but burst op fetch (BOF) does.
852 * Disabling PFEN makes sure BOF will be used.
854 if (np->features & FE_ERL)
855 np->rv_dmode |= ERL; /* Enable Read Line */
856 if (np->features & FE_BOF)
857 np->rv_dmode |= BOF; /* Burst Opcode Fetch */
858 if (np->features & FE_ERMP)
859 np->rv_dmode |= ERMP; /* Enable Read Multiple */
861 if ((np->features & FE_PFEN) && !np->ram_ba)
863 if (np->features & FE_PFEN)
865 np->rv_dcntl |= PFEN; /* Prefetch Enable */
866 if (np->features & FE_CLSE)
867 np->rv_dcntl |= CLSE; /* Cache Line Size Enable */
868 if (np->features & FE_WRIE)
869 np->rv_ctest3 |= WRIE; /* Write and Invalidate */
870 if (np->features & FE_DFS)
871 np->rv_ctest5 |= DFS; /* Dma Fifo Size */
876 np->rv_ctest4 |= MPEE; /* Master parity checking */
877 np->rv_scntl0 |= 0x0a; /* full arb., ena parity, par->ATN */
880 * Get parity checking, host ID and verbose mode from NVRAM
883 sym_nvram_setup_host(shost, np, nvram);
886 * Get SCSI addr of host adapter (set by bios?).
888 if (np->myaddr == 255) {
889 np->myaddr = INB(np, nc_scid) & 0x07;
891 np->myaddr = SYM_SETUP_HOST_ID;
895 * Prepare initial io register bits for burst length
897 sym_init_burst(np, burst_max);
901 * - LVD capable chips (895/895A/896/1010) report the
902 * current BUS mode through the STEST4 IO register.
903 * - For previous generation chips (825/825A/875),
904 * user has to tell us how to check against HVD,
905 * since a 100% safe algorithm is not possible.
907 np->scsi_mode = SMODE_SE;
908 if (np->features & (FE_ULTRA2|FE_ULTRA3))
909 np->scsi_mode = (np->sv_stest4 & SMODE);
910 else if (np->features & FE_DIFF) {
911 if (SYM_SETUP_SCSI_DIFF == 1) {
913 if (np->sv_stest2 & 0x20)
914 np->scsi_mode = SMODE_HVD;
916 else if (nvram->type == SYM_SYMBIOS_NVRAM) {
917 if (!(INB(np, nc_gpreg) & 0x08))
918 np->scsi_mode = SMODE_HVD;
921 else if (SYM_SETUP_SCSI_DIFF == 2)
922 np->scsi_mode = SMODE_HVD;
924 if (np->scsi_mode == SMODE_HVD)
925 np->rv_stest2 |= 0x20;
928 * Set LED support from SCRIPTS.
929 * Ignore this feature for boards known to use a
930 * specific GPIO wiring and for the 895A, 896
931 * and 1010 that drive the LED directly.
933 if ((SYM_SETUP_SCSI_LED ||
934 (nvram->type == SYM_SYMBIOS_NVRAM ||
935 (nvram->type == SYM_TEKRAM_NVRAM &&
936 np->device_id == PCI_DEVICE_ID_NCR_53C895))) &&
937 !(np->features & FE_LEDC) && !(np->sv_gpcntl & 0x01))
938 np->features |= FE_LED0;
943 switch(SYM_SETUP_IRQ_MODE & 3) {
945 np->rv_dcntl |= IRQM;
948 np->rv_dcntl |= (np->sv_dcntl & IRQM);
955 * Configure targets according to driver setup.
956 * If NVRAM present get targets setup from NVRAM.
958 for (i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) {
959 struct sym_tcb *tp = &np->target[i];
961 tp->usrflags |= (SYM_DISC_ENABLED | SYM_TAGS_ENABLED);
962 tp->usrtags = SYM_SETUP_MAX_TAG;
964 sym_nvram_setup_target(np, i, nvram);
967 tp->usrflags &= ~SYM_TAGS_ENABLED;
971 * Let user know about the settings.
973 printf("%s: %s, ID %d, Fast-%d, %s, %s\n", sym_name(np),
974 sym_nvram_type(nvram), np->myaddr,
975 (np->features & FE_ULTRA3) ? 80 :
976 (np->features & FE_ULTRA2) ? 40 :
977 (np->features & FE_ULTRA) ? 20 : 10,
978 sym_scsi_bus_mode(np->scsi_mode),
979 (np->rv_scntl0 & 0xa) ? "parity checking" : "NO parity");
981 * Tell him more on demand.
984 printf("%s: %s IRQ line driver%s\n",
986 np->rv_dcntl & IRQM ? "totem pole" : "open drain",
987 np->ram_ba ? ", using on-chip SRAM" : "");
988 printf("%s: using %s firmware.\n", sym_name(np), np->fw_name);
989 if (np->features & FE_NOPM)
990 printf("%s: handling phase mismatch from SCRIPTS.\n",
996 if (sym_verbose >= 2) {
997 printf ("%s: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = "
998 "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n",
999 sym_name(np), np->sv_scntl3, np->sv_dmode, np->sv_dcntl,
1000 np->sv_ctest3, np->sv_ctest4, np->sv_ctest5);
1002 printf ("%s: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = "
1003 "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n",
1004 sym_name(np), np->rv_scntl3, np->rv_dmode, np->rv_dcntl,
1005 np->rv_ctest3, np->rv_ctest4, np->rv_ctest5);
1008 * Let user be aware of targets that have some disable flags set.
1010 sym_print_targets_flag(np, SYM_SCAN_BOOT_DISABLED, "SCAN AT BOOT");
1012 sym_print_targets_flag(np, SYM_SCAN_LUNS_DISABLED,
1019 * Test the pci bus snoop logic :-(
1021 * Has to be called with interrupts disabled.
1023 #ifndef CONFIG_SCSI_SYM53C8XX_IOMAPPED
1024 static int sym_regtest (struct sym_hcb *np)
1026 register volatile u32 data;
1028 * chip registers may NOT be cached.
1029 * write 0xffffffff to a read only register area,
1030 * and try to read it back.
1033 OUTL(np, nc_dstat, data);
1034 data = INL(np, nc_dstat);
1036 if (data == 0xffffffff) {
1038 if ((data & 0xe2f0fffd) != 0x02000080) {
1040 printf ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n",
1048 static int sym_snooptest (struct sym_hcb *np)
1050 u32 sym_rd, sym_wr, sym_bk, host_rd, host_wr, pc, dstat;
1052 #ifndef CONFIG_SCSI_SYM53C8XX_IOMAPPED
1053 err |= sym_regtest (np);
1054 if (err) return (err);
1058 * Enable Master Parity Checking as we intend
1059 * to enable it for normal operations.
1061 OUTB(np, nc_ctest4, (np->rv_ctest4 & MPEE));
1065 pc = SCRIPTZ_BA(np, snooptest);
1069 * Set memory and register.
1071 np->scratch = cpu_to_scr(host_wr);
1072 OUTL(np, nc_temp, sym_wr);
1074 * Start script (exchange values)
1076 OUTL(np, nc_dsa, np->hcb_ba);
1079 * Wait 'til done (with timeout)
1081 for (i=0; i<SYM_SNOOP_TIMEOUT; i++)
1082 if (INB(np, nc_istat) & (INTF|SIP|DIP))
1084 if (i>=SYM_SNOOP_TIMEOUT) {
1085 printf ("CACHE TEST FAILED: timeout.\n");
1089 * Check for fatal DMA errors.
1091 dstat = INB(np, nc_dstat);
1092 #if 1 /* Band aiding for broken hardwares that fail PCI parity */
1093 if ((dstat & MDPE) && (np->rv_ctest4 & MPEE)) {
1094 printf ("%s: PCI DATA PARITY ERROR DETECTED - "
1095 "DISABLING MASTER DATA PARITY CHECKING.\n",
1097 np->rv_ctest4 &= ~MPEE;
1101 if (dstat & (MDPE|BF|IID)) {
1102 printf ("CACHE TEST FAILED: DMA error (dstat=0x%02x).", dstat);
1106 * Save termination position.
1108 pc = INL(np, nc_dsp);
1110 * Read memory and register.
1112 host_rd = scr_to_cpu(np->scratch);
1113 sym_rd = INL(np, nc_scratcha);
1114 sym_bk = INL(np, nc_temp);
1116 * Check termination position.
1118 if (pc != SCRIPTZ_BA(np, snoopend)+8) {
1119 printf ("CACHE TEST FAILED: script execution failed.\n");
1120 printf ("start=%08lx, pc=%08lx, end=%08lx\n",
1121 (u_long) SCRIPTZ_BA(np, snooptest), (u_long) pc,
1122 (u_long) SCRIPTZ_BA(np, snoopend) +8);
1128 if (host_wr != sym_rd) {
1129 printf ("CACHE TEST FAILED: host wrote %d, chip read %d.\n",
1130 (int) host_wr, (int) sym_rd);
1133 if (host_rd != sym_wr) {
1134 printf ("CACHE TEST FAILED: chip wrote %d, host read %d.\n",
1135 (int) sym_wr, (int) host_rd);
1138 if (sym_bk != sym_wr) {
1139 printf ("CACHE TEST FAILED: chip wrote %d, read back %d.\n",
1140 (int) sym_wr, (int) sym_bk);
1148 * log message for real hard errors
1150 * sym0 targ 0?: ERROR (ds:si) (so-si-sd) (sx/s3/s4) @ name (dsp:dbc).
1151 * reg: r0 r1 r2 r3 r4 r5 r6 ..... rf.
1153 * exception register:
1158 * so: control lines as driven by chip.
1159 * si: control lines as seen by chip.
1160 * sd: scsi data lines as seen by chip.
1163 * sx: sxfer (see the manual)
1164 * s3: scntl3 (see the manual)
1165 * s4: scntl4 (see the manual)
1167 * current script command:
1168 * dsp: script address (relative to start of script).
1169 * dbc: first word of script command.
1171 * First 24 register of the chip:
1174 static void sym_log_hard_error(struct sym_hcb *np, u_short sist, u_char dstat)
1180 u_char *script_base;
1183 dsp = INL(np, nc_dsp);
1185 if (dsp > np->scripta_ba &&
1186 dsp <= np->scripta_ba + np->scripta_sz) {
1187 script_ofs = dsp - np->scripta_ba;
1188 script_size = np->scripta_sz;
1189 script_base = (u_char *) np->scripta0;
1190 script_name = "scripta";
1192 else if (np->scriptb_ba < dsp &&
1193 dsp <= np->scriptb_ba + np->scriptb_sz) {
1194 script_ofs = dsp - np->scriptb_ba;
1195 script_size = np->scriptb_sz;
1196 script_base = (u_char *) np->scriptb0;
1197 script_name = "scriptb";
1202 script_name = "mem";
1205 printf ("%s:%d: ERROR (%x:%x) (%x-%x-%x) (%x/%x/%x) @ (%s %x:%08x).\n",
1206 sym_name(np), (unsigned)INB(np, nc_sdid)&0x0f, dstat, sist,
1207 (unsigned)INB(np, nc_socl), (unsigned)INB(np, nc_sbcl),
1208 (unsigned)INB(np, nc_sbdl), (unsigned)INB(np, nc_sxfer),
1209 (unsigned)INB(np, nc_scntl3),
1210 (np->features & FE_C10) ? (unsigned)INB(np, nc_scntl4) : 0,
1211 script_name, script_ofs, (unsigned)INL(np, nc_dbc));
1213 if (((script_ofs & 3) == 0) &&
1214 (unsigned)script_ofs < script_size) {
1215 printf ("%s: script cmd = %08x\n", sym_name(np),
1216 scr_to_cpu((int) *(u32 *)(script_base + script_ofs)));
1219 printf ("%s: regdump:", sym_name(np));
1221 printf (" %02x", (unsigned)INB_OFF(np, i));
1227 if (dstat & (MDPE|BF))
1228 sym_log_bus_error(np);
1231 static struct sym_chip sym_dev_table[] = {
1232 {PCI_DEVICE_ID_NCR_53C810, 0x0f, "810", 4, 8, 4, 64,
1235 #ifdef SYM_DEBUG_GENERIC_SUPPORT
1236 {PCI_DEVICE_ID_NCR_53C810, 0xff, "810a", 4, 8, 4, 1,
1240 {PCI_DEVICE_ID_NCR_53C810, 0xff, "810a", 4, 8, 4, 1,
1241 FE_CACHE_SET|FE_LDSTR|FE_PFEN|FE_BOF}
1244 {PCI_DEVICE_ID_NCR_53C815, 0xff, "815", 4, 8, 4, 64,
1247 {PCI_DEVICE_ID_NCR_53C825, 0x0f, "825", 6, 8, 4, 64,
1248 FE_WIDE|FE_BOF|FE_ERL|FE_DIFF}
1250 {PCI_DEVICE_ID_NCR_53C825, 0xff, "825a", 6, 8, 4, 2,
1251 FE_WIDE|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM|FE_DIFF}
1253 {PCI_DEVICE_ID_NCR_53C860, 0xff, "860", 4, 8, 5, 1,
1254 FE_ULTRA|FE_CACHE_SET|FE_BOF|FE_LDSTR|FE_PFEN}
1256 {PCI_DEVICE_ID_NCR_53C875, 0x01, "875", 6, 16, 5, 2,
1257 FE_WIDE|FE_ULTRA|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1258 FE_RAM|FE_DIFF|FE_VARCLK}
1260 {PCI_DEVICE_ID_NCR_53C875, 0xff, "875", 6, 16, 5, 2,
1261 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1262 FE_RAM|FE_DIFF|FE_VARCLK}
1264 {PCI_DEVICE_ID_NCR_53C875J, 0xff, "875J", 6, 16, 5, 2,
1265 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1266 FE_RAM|FE_DIFF|FE_VARCLK}
1268 {PCI_DEVICE_ID_NCR_53C885, 0xff, "885", 6, 16, 5, 2,
1269 FE_WIDE|FE_ULTRA|FE_DBLR|FE_CACHE0_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1270 FE_RAM|FE_DIFF|FE_VARCLK}
1272 #ifdef SYM_DEBUG_GENERIC_SUPPORT
1273 {PCI_DEVICE_ID_NCR_53C895, 0xff, "895", 6, 31, 7, 2,
1274 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|
1278 {PCI_DEVICE_ID_NCR_53C895, 0xff, "895", 6, 31, 7, 2,
1279 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1283 {PCI_DEVICE_ID_NCR_53C896, 0xff, "896", 6, 31, 7, 4,
1284 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1285 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_LCKFRQ}
1287 {PCI_DEVICE_ID_LSI_53C895A, 0xff, "895a", 6, 31, 7, 4,
1288 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1289 FE_RAM|FE_RAM8K|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_LCKFRQ}
1291 {PCI_DEVICE_ID_LSI_53C875A, 0xff, "875a", 6, 31, 7, 4,
1292 FE_WIDE|FE_ULTRA|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1293 FE_RAM|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_LCKFRQ}
1295 {PCI_DEVICE_ID_LSI_53C1010_33, 0x00, "1010-33", 6, 31, 7, 8,
1296 FE_WIDE|FE_ULTRA3|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFBC|FE_LDSTR|FE_PFEN|
1297 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_CRC|
1300 {PCI_DEVICE_ID_LSI_53C1010_33, 0xff, "1010-33", 6, 31, 7, 8,
1301 FE_WIDE|FE_ULTRA3|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFBC|FE_LDSTR|FE_PFEN|
1302 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_CRC|
1305 {PCI_DEVICE_ID_LSI_53C1010_66, 0xff, "1010-66", 6, 31, 7, 8,
1306 FE_WIDE|FE_ULTRA3|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFBC|FE_LDSTR|FE_PFEN|
1307 FE_RAM|FE_RAM8K|FE_64BIT|FE_DAC|FE_IO256|FE_NOPM|FE_LEDC|FE_66MHZ|FE_CRC|
1310 {PCI_DEVICE_ID_LSI_53C1510, 0xff, "1510d", 6, 31, 7, 4,
1311 FE_WIDE|FE_ULTRA2|FE_QUAD|FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|
1312 FE_RAM|FE_IO256|FE_LEDC}
1315 #define sym_num_devs \
1316 (sizeof(sym_dev_table) / sizeof(sym_dev_table[0]))
1319 * Look up the chip table.
1321 * Return a pointer to the chip entry if found,
1325 sym_lookup_chip_table (u_short device_id, u_char revision)
1327 struct sym_chip *chip;
1330 for (i = 0; i < sym_num_devs; i++) {
1331 chip = &sym_dev_table[i];
1332 if (device_id != chip->device_id)
1334 if (revision > chip->revision_id)
1342 #if SYM_CONF_DMA_ADDRESSING_MODE == 2
1344 * Lookup the 64 bit DMA segments map.
1345 * This is only used if the direct mapping
1346 * has been unsuccessful.
1348 int sym_lookup_dmap(struct sym_hcb *np, u32 h, int s)
1355 /* Look up existing mappings */
1356 for (i = SYM_DMAP_SIZE-1; i > 0; i--) {
1357 if (h == np->dmap_bah[i])
1360 /* If direct mapping is free, get it */
1361 if (!np->dmap_bah[s])
1363 /* Collision -> lookup free mappings */
1364 for (s = SYM_DMAP_SIZE-1; s > 0; s--) {
1365 if (!np->dmap_bah[s])
1369 panic("sym: ran out of 64 bit DMA segment registers");
1372 np->dmap_bah[s] = h;
1378 * Update IO registers scratch C..R so they will be
1379 * in sync. with queued CCB expectations.
1381 static void sym_update_dmap_regs(struct sym_hcb *np)
1385 if (!np->dmap_dirty)
1387 o = offsetof(struct sym_reg, nc_scrx[0]);
1388 for (i = 0; i < SYM_DMAP_SIZE; i++) {
1389 OUTL_OFF(np, o, np->dmap_bah[i]);
1396 /* Enforce all the fiddly SPI rules and the chip limitations */
1397 static void sym_check_goals(struct sym_hcb *np, struct scsi_target *starget,
1398 struct sym_trans *goal)
1400 if (!spi_support_wide(starget))
1403 if (!spi_support_sync(starget)) {
1412 if (spi_support_dt(starget)) {
1413 if (spi_support_dt_only(starget))
1416 if (goal->offset == 0)
1422 /* Some targets fail to properly negotiate DT in SE mode */
1423 if ((np->scsi_mode != SMODE_LVD) || !(np->features & FE_U3EN))
1427 /* all DT transfers must be wide */
1429 if (goal->offset > np->maxoffs_dt)
1430 goal->offset = np->maxoffs_dt;
1431 if (goal->period < np->minsync_dt)
1432 goal->period = np->minsync_dt;
1433 if (goal->period > np->maxsync_dt)
1434 goal->period = np->maxsync_dt;
1436 goal->iu = goal->qas = 0;
1437 if (goal->offset > np->maxoffs)
1438 goal->offset = np->maxoffs;
1439 if (goal->period < np->minsync)
1440 goal->period = np->minsync;
1441 if (goal->period > np->maxsync)
1442 goal->period = np->maxsync;
1447 * Prepare the next negotiation message if needed.
1449 * Fill in the part of message buffer that contains the
1450 * negotiation and the nego_status field of the CCB.
1451 * Returns the size of the message in bytes.
1453 static int sym_prepare_nego(struct sym_hcb *np, struct sym_ccb *cp, u_char *msgptr)
1455 struct sym_tcb *tp = &np->target[cp->target];
1456 struct scsi_target *starget = tp->starget;
1457 struct sym_trans *goal = &tp->tgoal;
1461 sym_check_goals(np, starget, goal);
1464 * Many devices implement PPR in a buggy way, so only use it if we
1467 if (goal->iu || goal->dt || goal->qas || (goal->period < 0xa)) {
1469 } else if (spi_width(starget) != goal->width) {
1471 } else if (spi_period(starget) != goal->period ||
1472 spi_offset(starget) != goal->offset) {
1475 goal->check_nego = 0;
1481 msgptr[msglen++] = M_EXTENDED;
1482 msgptr[msglen++] = 3;
1483 msgptr[msglen++] = M_X_SYNC_REQ;
1484 msgptr[msglen++] = goal->period;
1485 msgptr[msglen++] = goal->offset;
1488 msgptr[msglen++] = M_EXTENDED;
1489 msgptr[msglen++] = 2;
1490 msgptr[msglen++] = M_X_WIDE_REQ;
1491 msgptr[msglen++] = goal->width;
1494 msgptr[msglen++] = M_EXTENDED;
1495 msgptr[msglen++] = 6;
1496 msgptr[msglen++] = M_X_PPR_REQ;
1497 msgptr[msglen++] = goal->period;
1498 msgptr[msglen++] = 0;
1499 msgptr[msglen++] = goal->offset;
1500 msgptr[msglen++] = goal->width;
1501 msgptr[msglen++] = (goal->iu ? PPR_OPT_IU : 0) |
1502 (goal->dt ? PPR_OPT_DT : 0) |
1503 (goal->qas ? PPR_OPT_QAS : 0);
1507 cp->nego_status = nego;
1510 tp->nego_cp = cp; /* Keep track a nego will be performed */
1511 if (DEBUG_FLAGS & DEBUG_NEGO) {
1512 sym_print_nego_msg(np, cp->target,
1513 nego == NS_SYNC ? "sync msgout" :
1514 nego == NS_WIDE ? "wide msgout" :
1515 "ppr msgout", msgptr);
1523 * Insert a job into the start queue.
1525 void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp)
1529 #ifdef SYM_CONF_IARB_SUPPORT
1531 * If the previously queued CCB is not yet done,
1532 * set the IARB hint. The SCRIPTS will go with IARB
1533 * for this job when starting the previous one.
1534 * We leave devices a chance to win arbitration by
1535 * not using more than 'iarb_max' consecutive
1536 * immediate arbitrations.
1538 if (np->last_cp && np->iarb_count < np->iarb_max) {
1539 np->last_cp->host_flags |= HF_HINT_IARB;
1547 #if SYM_CONF_DMA_ADDRESSING_MODE == 2
1549 * Make SCRIPTS aware of the 64 bit DMA
1550 * segment registers not being up-to-date.
1553 cp->host_xflags |= HX_DMAP_DIRTY;
1557 * Insert first the idle task and then our job.
1558 * The MBs should ensure proper ordering.
1560 qidx = np->squeueput + 2;
1561 if (qidx >= MAX_QUEUE*2) qidx = 0;
1563 np->squeue [qidx] = cpu_to_scr(np->idletask_ba);
1564 MEMORY_WRITE_BARRIER();
1565 np->squeue [np->squeueput] = cpu_to_scr(cp->ccb_ba);
1567 np->squeueput = qidx;
1569 if (DEBUG_FLAGS & DEBUG_QUEUE)
1570 printf ("%s: queuepos=%d.\n", sym_name (np), np->squeueput);
1573 * Script processor may be waiting for reselect.
1576 MEMORY_WRITE_BARRIER();
1577 OUTB(np, nc_istat, SIGP|np->istat_sem);
1580 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
1582 * Start next ready-to-start CCBs.
1584 void sym_start_next_ccbs(struct sym_hcb *np, struct sym_lcb *lp, int maxn)
1590 * Paranoia, as usual. :-)
1592 assert(!lp->started_tags || !lp->started_no_tag);
1595 * Try to start as many commands as asked by caller.
1596 * Prevent from having both tagged and untagged
1597 * commands queued to the device at the same time.
1600 qp = sym_remque_head(&lp->waiting_ccbq);
1603 cp = sym_que_entry(qp, struct sym_ccb, link2_ccbq);
1604 if (cp->tag != NO_TAG) {
1605 if (lp->started_no_tag ||
1606 lp->started_tags >= lp->started_max) {
1607 sym_insque_head(qp, &lp->waiting_ccbq);
1610 lp->itlq_tbl[cp->tag] = cpu_to_scr(cp->ccb_ba);
1612 cpu_to_scr(SCRIPTA_BA(np, resel_tag));
1615 if (lp->started_no_tag || lp->started_tags) {
1616 sym_insque_head(qp, &lp->waiting_ccbq);
1619 lp->head.itl_task_sa = cpu_to_scr(cp->ccb_ba);
1621 cpu_to_scr(SCRIPTA_BA(np, resel_no_tag));
1622 ++lp->started_no_tag;
1625 sym_insque_tail(qp, &lp->started_ccbq);
1626 sym_put_start_queue(np, cp);
1629 #endif /* SYM_OPT_HANDLE_DEVICE_QUEUEING */
1632 * The chip may have completed jobs. Look at the DONE QUEUE.
1634 * On paper, memory read barriers may be needed here to
1635 * prevent out of order LOADs by the CPU from having
1636 * prefetched stale data prior to DMA having occurred.
1638 static int sym_wakeup_done (struct sym_hcb *np)
1647 /* MEMORY_READ_BARRIER(); */
1649 dsa = scr_to_cpu(np->dqueue[i]);
1653 if ((i = i+2) >= MAX_QUEUE*2)
1656 cp = sym_ccb_from_dsa(np, dsa);
1658 MEMORY_READ_BARRIER();
1659 sym_complete_ok (np, cp);
1663 printf ("%s: bad DSA (%x) in done queue.\n",
1664 sym_name(np), (u_int) dsa);
1672 * Complete all CCBs queued to the COMP queue.
1674 * These CCBs are assumed:
1675 * - Not to be referenced either by devices or
1676 * SCRIPTS-related queues and datas.
1677 * - To have to be completed with an error condition
1680 * The device queue freeze count is incremented
1681 * for each CCB that does not prevent this.
1682 * This function is called when all CCBs involved
1683 * in error handling/recovery have been reaped.
1685 static void sym_flush_comp_queue(struct sym_hcb *np, int cam_status)
1690 while ((qp = sym_remque_head(&np->comp_ccbq)) != 0) {
1691 struct scsi_cmnd *cmd;
1692 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
1693 sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq);
1694 /* Leave quiet CCBs waiting for resources */
1695 if (cp->host_status == HS_WAIT)
1699 sym_set_cam_status(cmd, cam_status);
1700 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
1701 if (sym_get_cam_status(cmd) == DID_SOFT_ERROR) {
1702 struct sym_tcb *tp = &np->target[cp->target];
1703 struct sym_lcb *lp = sym_lp(tp, cp->lun);
1705 sym_remque(&cp->link2_ccbq);
1706 sym_insque_tail(&cp->link2_ccbq,
1709 if (cp->tag != NO_TAG)
1712 --lp->started_no_tag;
1719 sym_free_ccb(np, cp);
1720 sym_xpt_done(np, cmd);
1725 * Complete all active CCBs with error.
1726 * Used on CHIP/SCSI RESET.
1728 static void sym_flush_busy_queue (struct sym_hcb *np, int cam_status)
1731 * Move all active CCBs to the COMP queue
1732 * and flush this queue.
1734 sym_que_splice(&np->busy_ccbq, &np->comp_ccbq);
1735 sym_que_init(&np->busy_ccbq);
1736 sym_flush_comp_queue(np, cam_status);
1743 * 0: initialisation.
1744 * 1: SCSI BUS RESET delivered or received.
1745 * 2: SCSI BUS MODE changed.
1747 void sym_start_up (struct sym_hcb *np, int reason)
1753 * Reset chip if asked, otherwise just clear fifos.
1758 OUTB(np, nc_stest3, TE|CSF);
1759 OUTONB(np, nc_ctest3, CLF);
1765 phys = np->squeue_ba;
1766 for (i = 0; i < MAX_QUEUE*2; i += 2) {
1767 np->squeue[i] = cpu_to_scr(np->idletask_ba);
1768 np->squeue[i+1] = cpu_to_scr(phys + (i+2)*4);
1770 np->squeue[MAX_QUEUE*2-1] = cpu_to_scr(phys);
1773 * Start at first entry.
1780 phys = np->dqueue_ba;
1781 for (i = 0; i < MAX_QUEUE*2; i += 2) {
1783 np->dqueue[i+1] = cpu_to_scr(phys + (i+2)*4);
1785 np->dqueue[MAX_QUEUE*2-1] = cpu_to_scr(phys);
1788 * Start at first entry.
1793 * Install patches in scripts.
1794 * This also let point to first position the start
1795 * and done queue pointers used from SCRIPTS.
1800 * Wakeup all pending jobs.
1802 sym_flush_busy_queue(np, DID_RESET);
1807 OUTB(np, nc_istat, 0x00); /* Remove Reset, abort */
1809 udelay(2000); /* The 895 needs time for the bus mode to settle */
1811 OUTB(np, nc_scntl0, np->rv_scntl0 | 0xc0);
1812 /* full arb., ena parity, par->ATN */
1813 OUTB(np, nc_scntl1, 0x00); /* odd parity, and remove CRST!! */
1815 sym_selectclock(np, np->rv_scntl3); /* Select SCSI clock */
1817 OUTB(np, nc_scid , RRE|np->myaddr); /* Adapter SCSI address */
1818 OUTW(np, nc_respid, 1ul<<np->myaddr); /* Id to respond to */
1819 OUTB(np, nc_istat , SIGP ); /* Signal Process */
1820 OUTB(np, nc_dmode , np->rv_dmode); /* Burst length, dma mode */
1821 OUTB(np, nc_ctest5, np->rv_ctest5); /* Large fifo + large burst */
1823 OUTB(np, nc_dcntl , NOCOM|np->rv_dcntl); /* Protect SFBR */
1824 OUTB(np, nc_ctest3, np->rv_ctest3); /* Write and invalidate */
1825 OUTB(np, nc_ctest4, np->rv_ctest4); /* Master parity checking */
1827 /* Extended Sreq/Sack filtering not supported on the C10 */
1828 if (np->features & FE_C10)
1829 OUTB(np, nc_stest2, np->rv_stest2);
1831 OUTB(np, nc_stest2, EXT|np->rv_stest2);
1833 OUTB(np, nc_stest3, TE); /* TolerANT enable */
1834 OUTB(np, nc_stime0, 0x0c); /* HTH disabled STO 0.25 sec */
1837 * For now, disable AIP generation on C1010-66.
1839 if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_66)
1840 OUTB(np, nc_aipcntl1, DISAIP);
1843 * C10101 rev. 0 errata.
1844 * Errant SGE's when in narrow. Write bits 4 & 5 of
1845 * STEST1 register to disable SGE. We probably should do
1846 * that from SCRIPTS for each selection/reselection, but
1847 * I just don't want. :)
1849 if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
1850 np->revision_id < 1)
1851 OUTB(np, nc_stest1, INB(np, nc_stest1) | 0x30);
1854 * DEL 441 - 53C876 Rev 5 - Part Number 609-0392787/2788 - ITEM 2.
1855 * Disable overlapped arbitration for some dual function devices,
1856 * regardless revision id (kind of post-chip-design feature. ;-))
1858 if (np->device_id == PCI_DEVICE_ID_NCR_53C875)
1859 OUTB(np, nc_ctest0, (1<<5));
1860 else if (np->device_id == PCI_DEVICE_ID_NCR_53C896)
1861 np->rv_ccntl0 |= DPR;
1864 * Write CCNTL0/CCNTL1 for chips capable of 64 bit addressing
1865 * and/or hardware phase mismatch, since only such chips
1866 * seem to support those IO registers.
1868 if (np->features & (FE_DAC|FE_NOPM)) {
1869 OUTB(np, nc_ccntl0, np->rv_ccntl0);
1870 OUTB(np, nc_ccntl1, np->rv_ccntl1);
1873 #if SYM_CONF_DMA_ADDRESSING_MODE == 2
1875 * Set up scratch C and DRS IO registers to map the 32 bit
1876 * DMA address range our data structures are located in.
1879 np->dmap_bah[0] = 0; /* ??? */
1880 OUTL(np, nc_scrx[0], np->dmap_bah[0]);
1881 OUTL(np, nc_drs, np->dmap_bah[0]);
1886 * If phase mismatch handled by scripts (895A/896/1010),
1887 * set PM jump addresses.
1889 if (np->features & FE_NOPM) {
1890 OUTL(np, nc_pmjad1, SCRIPTB_BA(np, pm_handle));
1891 OUTL(np, nc_pmjad2, SCRIPTB_BA(np, pm_handle));
1895 * Enable GPIO0 pin for writing if LED support from SCRIPTS.
1896 * Also set GPIO5 and clear GPIO6 if hardware LED control.
1898 if (np->features & FE_LED0)
1899 OUTB(np, nc_gpcntl, INB(np, nc_gpcntl) & ~0x01);
1900 else if (np->features & FE_LEDC)
1901 OUTB(np, nc_gpcntl, (INB(np, nc_gpcntl) & ~0x41) | 0x20);
1906 OUTW(np, nc_sien , STO|HTH|MA|SGE|UDC|RST|PAR);
1907 OUTB(np, nc_dien , MDPE|BF|SSI|SIR|IID);
1910 * For 895/6 enable SBMC interrupt and save current SCSI bus mode.
1911 * Try to eat the spurious SBMC interrupt that may occur when
1912 * we reset the chip but not the SCSI BUS (at initialization).
1914 if (np->features & (FE_ULTRA2|FE_ULTRA3)) {
1915 OUTONW(np, nc_sien, SBMC);
1921 np->scsi_mode = INB(np, nc_stest4) & SMODE;
1925 * Fill in target structure.
1926 * Reinitialize usrsync.
1927 * Reinitialize usrwide.
1928 * Prepare sync negotiation according to actual SCSI bus mode.
1930 for (i=0;i<SYM_CONF_MAX_TARGET;i++) {
1931 struct sym_tcb *tp = &np->target[i];
1935 tp->head.wval = np->rv_scntl3;
1940 * Download SCSI SCRIPTS to on-chip RAM if present,
1941 * and start script processor.
1942 * We do the download preferently from the CPU.
1943 * For platforms that may not support PCI memory mapping,
1944 * we use simple SCRIPTS that performs MEMORY MOVEs.
1946 phys = SCRIPTA_BA(np, init);
1948 if (sym_verbose >= 2)
1949 printf("%s: Downloading SCSI SCRIPTS.\n", sym_name(np));
1950 memcpy_toio(np->s.ramaddr, np->scripta0, np->scripta_sz);
1951 if (np->ram_ws == 8192) {
1952 memcpy_toio(np->s.ramaddr + 4096, np->scriptb0, np->scriptb_sz);
1953 phys = scr_to_cpu(np->scr_ram_seg);
1954 OUTL(np, nc_mmws, phys);
1955 OUTL(np, nc_mmrs, phys);
1956 OUTL(np, nc_sfs, phys);
1957 phys = SCRIPTB_BA(np, start64);
1963 OUTL(np, nc_dsa, np->hcb_ba);
1967 * Notify the XPT about the RESET condition.
1970 sym_xpt_async_bus_reset(np);
1974 * Switch trans mode for current job and its target.
1976 static void sym_settrans(struct sym_hcb *np, int target, u_char opts, u_char ofs,
1977 u_char per, u_char wide, u_char div, u_char fak)
1980 u_char sval, wval, uval;
1981 struct sym_tcb *tp = &np->target[target];
1983 assert(target == (INB(np, nc_sdid) & 0x0f));
1985 sval = tp->head.sval;
1986 wval = tp->head.wval;
1987 uval = tp->head.uval;
1990 printf("XXXX sval=%x wval=%x uval=%x (%x)\n",
1991 sval, wval, uval, np->rv_scntl3);
1996 if (!(np->features & FE_C10))
1997 sval = (sval & ~0x1f) | ofs;
1999 sval = (sval & ~0x3f) | ofs;
2002 * Set the sync divisor and extra clock factor.
2005 wval = (wval & ~0x70) | ((div+1) << 4);
2006 if (!(np->features & FE_C10))
2007 sval = (sval & ~0xe0) | (fak << 5);
2009 uval = uval & ~(XCLKH_ST|XCLKH_DT|XCLKS_ST|XCLKS_DT);
2010 if (fak >= 1) uval |= (XCLKH_ST|XCLKH_DT);
2011 if (fak >= 2) uval |= (XCLKS_ST|XCLKS_DT);
2016 * Set the bus width.
2023 * Set misc. ultra enable bits.
2025 if (np->features & FE_C10) {
2026 uval = uval & ~(U3EN|AIPCKEN);
2028 assert(np->features & FE_U3EN);
2032 wval = wval & ~ULTRA;
2033 if (per <= 12) wval |= ULTRA;
2037 * Stop there if sync parameters are unchanged.
2039 if (tp->head.sval == sval &&
2040 tp->head.wval == wval &&
2041 tp->head.uval == uval)
2043 tp->head.sval = sval;
2044 tp->head.wval = wval;
2045 tp->head.uval = uval;
2048 * Disable extended Sreq/Sack filtering if per < 50.
2049 * Not supported on the C1010.
2051 if (per < 50 && !(np->features & FE_C10))
2052 OUTOFFB(np, nc_stest2, EXT);
2055 * set actual value and sync_status
2057 OUTB(np, nc_sxfer, tp->head.sval);
2058 OUTB(np, nc_scntl3, tp->head.wval);
2060 if (np->features & FE_C10) {
2061 OUTB(np, nc_scntl4, tp->head.uval);
2065 * patch ALL busy ccbs of this target.
2067 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
2069 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
2070 if (cp->target != target)
2072 cp->phys.select.sel_scntl3 = tp->head.wval;
2073 cp->phys.select.sel_sxfer = tp->head.sval;
2074 if (np->features & FE_C10) {
2075 cp->phys.select.sel_scntl4 = tp->head.uval;
2081 * We received a WDTR.
2082 * Let everything be aware of the changes.
2084 static void sym_setwide(struct sym_hcb *np, int target, u_char wide)
2086 struct sym_tcb *tp = &np->target[target];
2087 struct scsi_target *starget = tp->starget;
2089 if (spi_width(starget) == wide)
2092 sym_settrans(np, target, 0, 0, 0, wide, 0, 0);
2094 tp->tgoal.width = wide;
2095 spi_offset(starget) = 0;
2096 spi_period(starget) = 0;
2097 spi_width(starget) = wide;
2098 spi_iu(starget) = 0;
2099 spi_dt(starget) = 0;
2100 spi_qas(starget) = 0;
2102 if (sym_verbose >= 3)
2103 spi_display_xfer_agreement(starget);
2107 * We received a SDTR.
2108 * Let everything be aware of the changes.
2111 sym_setsync(struct sym_hcb *np, int target,
2112 u_char ofs, u_char per, u_char div, u_char fak)
2114 struct sym_tcb *tp = &np->target[target];
2115 struct scsi_target *starget = tp->starget;
2116 u_char wide = (tp->head.wval & EWS) ? BUS_16_BIT : BUS_8_BIT;
2118 sym_settrans(np, target, 0, ofs, per, wide, div, fak);
2120 spi_period(starget) = per;
2121 spi_offset(starget) = ofs;
2122 spi_iu(starget) = spi_dt(starget) = spi_qas(starget) = 0;
2124 if (!tp->tgoal.dt && !tp->tgoal.iu && !tp->tgoal.qas) {
2125 tp->tgoal.period = per;
2126 tp->tgoal.offset = ofs;
2127 tp->tgoal.check_nego = 0;
2130 spi_display_xfer_agreement(starget);
2134 * We received a PPR.
2135 * Let everything be aware of the changes.
2138 sym_setpprot(struct sym_hcb *np, int target, u_char opts, u_char ofs,
2139 u_char per, u_char wide, u_char div, u_char fak)
2141 struct sym_tcb *tp = &np->target[target];
2142 struct scsi_target *starget = tp->starget;
2144 sym_settrans(np, target, opts, ofs, per, wide, div, fak);
2146 spi_width(starget) = tp->tgoal.width = wide;
2147 spi_period(starget) = tp->tgoal.period = per;
2148 spi_offset(starget) = tp->tgoal.offset = ofs;
2149 spi_iu(starget) = tp->tgoal.iu = !!(opts & PPR_OPT_IU);
2150 spi_dt(starget) = tp->tgoal.dt = !!(opts & PPR_OPT_DT);
2151 spi_qas(starget) = tp->tgoal.qas = !!(opts & PPR_OPT_QAS);
2152 tp->tgoal.check_nego = 0;
2154 spi_display_xfer_agreement(starget);
2158 * generic recovery from scsi interrupt
2160 * The doc says that when the chip gets an SCSI interrupt,
2161 * it tries to stop in an orderly fashion, by completing
2162 * an instruction fetch that had started or by flushing
2163 * the DMA fifo for a write to memory that was executing.
2164 * Such a fashion is not enough to know if the instruction
2165 * that was just before the current DSP value has been
2168 * There are some small SCRIPTS sections that deal with
2169 * the start queue and the done queue that may break any
2170 * assomption from the C code if we are interrupted
2171 * inside, so we reset if this happens. Btw, since these
2172 * SCRIPTS sections are executed while the SCRIPTS hasn't
2173 * started SCSI operations, it is very unlikely to happen.
2175 * All the driver data structures are supposed to be
2176 * allocated from the same 4 GB memory window, so there
2177 * is a 1 to 1 relationship between DSA and driver data
2178 * structures. Since we are careful :) to invalidate the
2179 * DSA when we complete a command or when the SCRIPTS
2180 * pushes a DSA into a queue, we can trust it when it
2183 static void sym_recover_scsi_int (struct sym_hcb *np, u_char hsts)
2185 u32 dsp = INL(np, nc_dsp);
2186 u32 dsa = INL(np, nc_dsa);
2187 struct sym_ccb *cp = sym_ccb_from_dsa(np, dsa);
2190 * If we haven't been interrupted inside the SCRIPTS
2191 * critical pathes, we can safely restart the SCRIPTS
2192 * and trust the DSA value if it matches a CCB.
2194 if ((!(dsp > SCRIPTA_BA(np, getjob_begin) &&
2195 dsp < SCRIPTA_BA(np, getjob_end) + 1)) &&
2196 (!(dsp > SCRIPTA_BA(np, ungetjob) &&
2197 dsp < SCRIPTA_BA(np, reselect) + 1)) &&
2198 (!(dsp > SCRIPTB_BA(np, sel_for_abort) &&
2199 dsp < SCRIPTB_BA(np, sel_for_abort_1) + 1)) &&
2200 (!(dsp > SCRIPTA_BA(np, done) &&
2201 dsp < SCRIPTA_BA(np, done_end) + 1))) {
2202 OUTB(np, nc_ctest3, np->rv_ctest3 | CLF); /* clear dma fifo */
2203 OUTB(np, nc_stest3, TE|CSF); /* clear scsi fifo */
2205 * If we have a CCB, let the SCRIPTS call us back for
2206 * the handling of the error with SCRATCHA filled with
2207 * STARTPOS. This way, we will be able to freeze the
2208 * device queue and requeue awaiting IOs.
2211 cp->host_status = hsts;
2212 OUTL_DSP(np, SCRIPTA_BA(np, complete_error));
2215 * Otherwise just restart the SCRIPTS.
2218 OUTL(np, nc_dsa, 0xffffff);
2219 OUTL_DSP(np, SCRIPTA_BA(np, start));
2228 sym_start_reset(np);
2232 * chip exception handler for selection timeout
2234 static void sym_int_sto (struct sym_hcb *np)
2236 u32 dsp = INL(np, nc_dsp);
2238 if (DEBUG_FLAGS & DEBUG_TINY) printf ("T");
2240 if (dsp == SCRIPTA_BA(np, wf_sel_done) + 8)
2241 sym_recover_scsi_int(np, HS_SEL_TIMEOUT);
2243 sym_start_reset(np);
2247 * chip exception handler for unexpected disconnect
2249 static void sym_int_udc (struct sym_hcb *np)
2251 printf ("%s: unexpected disconnect\n", sym_name(np));
2252 sym_recover_scsi_int(np, HS_UNEXPECTED);
2256 * chip exception handler for SCSI bus mode change
2258 * spi2-r12 11.2.3 says a transceiver mode change must
2259 * generate a reset event and a device that detects a reset
2260 * event shall initiate a hard reset. It says also that a
2261 * device that detects a mode change shall set data transfer
2262 * mode to eight bit asynchronous, etc...
2263 * So, just reinitializing all except chip should be enough.
2265 static void sym_int_sbmc (struct sym_hcb *np)
2267 u_char scsi_mode = INB(np, nc_stest4) & SMODE;
2272 printf("%s: SCSI BUS mode change from %s to %s.\n", sym_name(np),
2273 sym_scsi_bus_mode(np->scsi_mode), sym_scsi_bus_mode(scsi_mode));
2276 * Should suspend command processing for a few seconds and
2277 * reinitialize all except the chip.
2279 sym_start_up (np, 2);
2283 * chip exception handler for SCSI parity error.
2285 * When the chip detects a SCSI parity error and is
2286 * currently executing a (CH)MOV instruction, it does
2287 * not interrupt immediately, but tries to finish the
2288 * transfer of the current scatter entry before
2289 * interrupting. The following situations may occur:
2291 * - The complete scatter entry has been transferred
2292 * without the device having changed phase.
2293 * The chip will then interrupt with the DSP pointing
2294 * to the instruction that follows the MOV.
2296 * - A phase mismatch occurs before the MOV finished
2297 * and phase errors are to be handled by the C code.
2298 * The chip will then interrupt with both PAR and MA
2301 * - A phase mismatch occurs before the MOV finished and
2302 * phase errors are to be handled by SCRIPTS.
2303 * The chip will load the DSP with the phase mismatch
2304 * JUMP address and interrupt the host processor.
2306 static void sym_int_par (struct sym_hcb *np, u_short sist)
2308 u_char hsts = INB(np, HS_PRT);
2309 u32 dsp = INL(np, nc_dsp);
2310 u32 dbc = INL(np, nc_dbc);
2311 u32 dsa = INL(np, nc_dsa);
2312 u_char sbcl = INB(np, nc_sbcl);
2313 u_char cmd = dbc >> 24;
2314 int phase = cmd & 7;
2315 struct sym_ccb *cp = sym_ccb_from_dsa(np, dsa);
2317 printf("%s: SCSI parity error detected: SCR1=%d DBC=%x SBCL=%x\n",
2318 sym_name(np), hsts, dbc, sbcl);
2321 * Check that the chip is connected to the SCSI BUS.
2323 if (!(INB(np, nc_scntl1) & ISCON)) {
2324 sym_recover_scsi_int(np, HS_UNEXPECTED);
2329 * If the nexus is not clearly identified, reset the bus.
2330 * We will try to do better later.
2336 * Check instruction was a MOV, direction was INPUT and
2339 if ((cmd & 0xc0) || !(phase & 1) || !(sbcl & 0x8))
2343 * Keep track of the parity error.
2345 OUTONB(np, HF_PRT, HF_EXT_ERR);
2346 cp->xerr_status |= XE_PARITY_ERR;
2349 * Prepare the message to send to the device.
2351 np->msgout[0] = (phase == 7) ? M_PARITY : M_ID_ERROR;
2354 * If the old phase was DATA IN phase, we have to deal with
2355 * the 3 situations described above.
2356 * For other input phases (MSG IN and STATUS), the device
2357 * must resend the whole thing that failed parity checking
2358 * or signal error. So, jumping to dispatcher should be OK.
2360 if (phase == 1 || phase == 5) {
2361 /* Phase mismatch handled by SCRIPTS */
2362 if (dsp == SCRIPTB_BA(np, pm_handle))
2364 /* Phase mismatch handled by the C code */
2367 /* No phase mismatch occurred */
2369 sym_set_script_dp (np, cp, dsp);
2370 OUTL_DSP(np, SCRIPTA_BA(np, dispatch));
2373 else if (phase == 7) /* We definitely cannot handle parity errors */
2374 #if 1 /* in message-in phase due to the relection */
2375 goto reset_all; /* path and various message anticipations. */
2377 OUTL_DSP(np, SCRIPTA_BA(np, clrack));
2380 OUTL_DSP(np, SCRIPTA_BA(np, dispatch));
2384 sym_start_reset(np);
2389 * chip exception handler for phase errors.
2391 * We have to construct a new transfer descriptor,
2392 * to transfer the rest of the current block.
2394 static void sym_int_ma (struct sym_hcb *np)
2407 u_char hflags, hflags0;
2411 dsp = INL(np, nc_dsp);
2412 dbc = INL(np, nc_dbc);
2413 dsa = INL(np, nc_dsa);
2416 rest = dbc & 0xffffff;
2420 * locate matching cp if any.
2422 cp = sym_ccb_from_dsa(np, dsa);
2425 * Donnot take into account dma fifo and various buffers in
2426 * INPUT phase since the chip flushes everything before
2427 * raising the MA interrupt for interrupted INPUT phases.
2428 * For DATA IN phase, we will check for the SWIDE later.
2430 if ((cmd & 7) != 1 && (cmd & 7) != 5) {
2433 if (np->features & FE_DFBC)
2434 delta = INW(np, nc_dfbc);
2439 * Read DFIFO, CTEST[4-6] using 1 PCI bus ownership.
2441 dfifo = INL(np, nc_dfifo);
2444 * Calculate remaining bytes in DMA fifo.
2445 * (CTEST5 = dfifo >> 16)
2447 if (dfifo & (DFS << 16))
2448 delta = ((((dfifo >> 8) & 0x300) |
2449 (dfifo & 0xff)) - rest) & 0x3ff;
2451 delta = ((dfifo & 0xff) - rest) & 0x7f;
2455 * The data in the dma fifo has not been transfered to
2456 * the target -> add the amount to the rest
2457 * and clear the data.
2458 * Check the sstat2 register in case of wide transfer.
2461 ss0 = INB(np, nc_sstat0);
2462 if (ss0 & OLF) rest++;
2463 if (!(np->features & FE_C10))
2464 if (ss0 & ORF) rest++;
2465 if (cp && (cp->phys.select.sel_scntl3 & EWS)) {
2466 ss2 = INB(np, nc_sstat2);
2467 if (ss2 & OLF1) rest++;
2468 if (!(np->features & FE_C10))
2469 if (ss2 & ORF1) rest++;
2475 OUTB(np, nc_ctest3, np->rv_ctest3 | CLF); /* dma fifo */
2476 OUTB(np, nc_stest3, TE|CSF); /* scsi fifo */
2480 * log the information
2482 if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_PHASE))
2483 printf ("P%x%x RL=%d D=%d ", cmd&7, INB(np, nc_sbcl)&7,
2484 (unsigned) rest, (unsigned) delta);
2487 * try to find the interrupted script command,
2488 * and the address at which to continue.
2492 if (dsp > np->scripta_ba &&
2493 dsp <= np->scripta_ba + np->scripta_sz) {
2494 vdsp = (u32 *)((char*)np->scripta0 + (dsp-np->scripta_ba-8));
2497 else if (dsp > np->scriptb_ba &&
2498 dsp <= np->scriptb_ba + np->scriptb_sz) {
2499 vdsp = (u32 *)((char*)np->scriptb0 + (dsp-np->scriptb_ba-8));
2504 * log the information
2506 if (DEBUG_FLAGS & DEBUG_PHASE) {
2507 printf ("\nCP=%p DSP=%x NXT=%x VDSP=%p CMD=%x ",
2508 cp, (unsigned)dsp, (unsigned)nxtdsp, vdsp, cmd);
2512 printf ("%s: interrupted SCRIPT address not found.\n",
2518 printf ("%s: SCSI phase error fixup: CCB already dequeued.\n",
2524 * get old startaddress and old length.
2526 oadr = scr_to_cpu(vdsp[1]);
2528 if (cmd & 0x10) { /* Table indirect */
2529 tblp = (u32 *) ((char*) &cp->phys + oadr);
2530 olen = scr_to_cpu(tblp[0]);
2531 oadr = scr_to_cpu(tblp[1]);
2534 olen = scr_to_cpu(vdsp[0]) & 0xffffff;
2537 if (DEBUG_FLAGS & DEBUG_PHASE) {
2538 printf ("OCMD=%x\nTBLP=%p OLEN=%x OADR=%x\n",
2539 (unsigned) (scr_to_cpu(vdsp[0]) >> 24),
2546 * check cmd against assumed interrupted script command.
2547 * If dt data phase, the MOVE instruction hasn't bit 4 of
2550 if (((cmd & 2) ? cmd : (cmd & ~4)) != (scr_to_cpu(vdsp[0]) >> 24)) {
2551 sym_print_addr(cp->cmd,
2552 "internal error: cmd=%02x != %02x=(vdsp[0] >> 24)\n",
2553 cmd, scr_to_cpu(vdsp[0]) >> 24);
2559 * if old phase not dataphase, leave here.
2562 sym_print_addr(cp->cmd,
2563 "phase change %x-%x %d@%08x resid=%d.\n",
2564 cmd&7, INB(np, nc_sbcl)&7, (unsigned)olen,
2565 (unsigned)oadr, (unsigned)rest);
2566 goto unexpected_phase;
2570 * Choose the correct PM save area.
2572 * Look at the PM_SAVE SCRIPT if you want to understand
2573 * this stuff. The equivalent code is implemented in
2574 * SCRIPTS for the 895A, 896 and 1010 that are able to
2575 * handle PM from the SCRIPTS processor.
2577 hflags0 = INB(np, HF_PRT);
2580 if (hflags & (HF_IN_PM0 | HF_IN_PM1 | HF_DP_SAVED)) {
2581 if (hflags & HF_IN_PM0)
2582 nxtdsp = scr_to_cpu(cp->phys.pm0.ret);
2583 else if (hflags & HF_IN_PM1)
2584 nxtdsp = scr_to_cpu(cp->phys.pm1.ret);
2586 if (hflags & HF_DP_SAVED)
2587 hflags ^= HF_ACT_PM;
2590 if (!(hflags & HF_ACT_PM)) {
2592 newcmd = SCRIPTA_BA(np, pm0_data);
2596 newcmd = SCRIPTA_BA(np, pm1_data);
2599 hflags &= ~(HF_IN_PM0 | HF_IN_PM1 | HF_DP_SAVED);
2600 if (hflags != hflags0)
2601 OUTB(np, HF_PRT, hflags);
2604 * fillin the phase mismatch context
2606 pm->sg.addr = cpu_to_scr(oadr + olen - rest);
2607 pm->sg.size = cpu_to_scr(rest);
2608 pm->ret = cpu_to_scr(nxtdsp);
2611 * If we have a SWIDE,
2612 * - prepare the address to write the SWIDE from SCRIPTS,
2613 * - compute the SCRIPTS address to restart from,
2614 * - move current data pointer context by one byte.
2616 nxtdsp = SCRIPTA_BA(np, dispatch);
2617 if ((cmd & 7) == 1 && cp && (cp->phys.select.sel_scntl3 & EWS) &&
2618 (INB(np, nc_scntl2) & WSR)) {
2622 * Set up the table indirect for the MOVE
2623 * of the residual byte and adjust the data
2626 tmp = scr_to_cpu(pm->sg.addr);
2627 cp->phys.wresid.addr = cpu_to_scr(tmp);
2628 pm->sg.addr = cpu_to_scr(tmp + 1);
2629 tmp = scr_to_cpu(pm->sg.size);
2630 cp->phys.wresid.size = cpu_to_scr((tmp&0xff000000) | 1);
2631 pm->sg.size = cpu_to_scr(tmp - 1);
2634 * If only the residual byte is to be moved,
2635 * no PM context is needed.
2637 if ((tmp&0xffffff) == 1)
2641 * Prepare the address of SCRIPTS that will
2642 * move the residual byte to memory.
2644 nxtdsp = SCRIPTB_BA(np, wsr_ma_helper);
2647 if (DEBUG_FLAGS & DEBUG_PHASE) {
2648 sym_print_addr(cp->cmd, "PM %x %x %x / %x %x %x.\n",
2649 hflags0, hflags, newcmd,
2650 (unsigned)scr_to_cpu(pm->sg.addr),
2651 (unsigned)scr_to_cpu(pm->sg.size),
2652 (unsigned)scr_to_cpu(pm->ret));
2656 * Restart the SCRIPTS processor.
2658 sym_set_script_dp (np, cp, newcmd);
2659 OUTL_DSP(np, nxtdsp);
2663 * Unexpected phase changes that occurs when the current phase
2664 * is not a DATA IN or DATA OUT phase are due to error conditions.
2665 * Such event may only happen when the SCRIPTS is using a
2666 * multibyte SCSI MOVE.
2668 * Phase change Some possible cause
2670 * COMMAND --> MSG IN SCSI parity error detected by target.
2671 * COMMAND --> STATUS Bad command or refused by target.
2672 * MSG OUT --> MSG IN Message rejected by target.
2673 * MSG OUT --> COMMAND Bogus target that discards extended
2674 * negotiation messages.
2676 * The code below does not care of the new phase and so
2677 * trusts the target. Why to annoy it ?
2678 * If the interrupted phase is COMMAND phase, we restart at
2680 * If a target does not get all the messages after selection,
2681 * the code assumes blindly that the target discards extended
2682 * messages and clears the negotiation status.
2683 * If the target does not want all our response to negotiation,
2684 * we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids
2685 * bloat for such a should_not_happen situation).
2686 * In all other situation, we reset the BUS.
2687 * Are these assumptions reasonnable ? (Wait and see ...)
2694 case 2: /* COMMAND phase */
2695 nxtdsp = SCRIPTA_BA(np, dispatch);
2698 case 3: /* STATUS phase */
2699 nxtdsp = SCRIPTA_BA(np, dispatch);
2702 case 6: /* MSG OUT phase */
2704 * If the device may want to use untagged when we want
2705 * tagged, we prepare an IDENTIFY without disc. granted,
2706 * since we will not be able to handle reselect.
2707 * Otherwise, we just don't care.
2709 if (dsp == SCRIPTA_BA(np, send_ident)) {
2710 if (cp->tag != NO_TAG && olen - rest <= 3) {
2711 cp->host_status = HS_BUSY;
2712 np->msgout[0] = IDENTIFY(0, cp->lun);
2713 nxtdsp = SCRIPTB_BA(np, ident_break_atn);
2716 nxtdsp = SCRIPTB_BA(np, ident_break);
2718 else if (dsp == SCRIPTB_BA(np, send_wdtr) ||
2719 dsp == SCRIPTB_BA(np, send_sdtr) ||
2720 dsp == SCRIPTB_BA(np, send_ppr)) {
2721 nxtdsp = SCRIPTB_BA(np, nego_bad_phase);
2722 if (dsp == SCRIPTB_BA(np, send_ppr)) {
2723 struct scsi_device *dev = cp->cmd->device;
2729 case 7: /* MSG IN phase */
2730 nxtdsp = SCRIPTA_BA(np, clrack);
2736 OUTL_DSP(np, nxtdsp);
2741 sym_start_reset(np);
2745 * chip interrupt handler
2747 * In normal situations, interrupt conditions occur one at
2748 * a time. But when something bad happens on the SCSI BUS,
2749 * the chip may raise several interrupt flags before
2750 * stopping and interrupting the CPU. The additionnal
2751 * interrupt flags are stacked in some extra registers
2752 * after the SIP and/or DIP flag has been raised in the
2753 * ISTAT. After the CPU has read the interrupt condition
2754 * flag from SIST or DSTAT, the chip unstacks the other
2755 * interrupt flags and sets the corresponding bits in
2756 * SIST or DSTAT. Since the chip starts stacking once the
2757 * SIP or DIP flag is set, there is a small window of time
2758 * where the stacking does not occur.
2760 * Typically, multiple interrupt conditions may happen in
2761 * the following situations:
2763 * - SCSI parity error + Phase mismatch (PAR|MA)
2764 * When an parity error is detected in input phase
2765 * and the device switches to msg-in phase inside a
2767 * - SCSI parity error + Unexpected disconnect (PAR|UDC)
2768 * When a stupid device does not want to handle the
2769 * recovery of an SCSI parity error.
2770 * - Some combinations of STO, PAR, UDC, ...
2771 * When using non compliant SCSI stuff, when user is
2772 * doing non compliant hot tampering on the BUS, when
2773 * something really bad happens to a device, etc ...
2775 * The heuristic suggested by SYMBIOS to handle
2776 * multiple interrupts is to try unstacking all
2777 * interrupts conditions and to handle them on some
2778 * priority based on error severity.
2779 * This will work when the unstacking has been
2780 * successful, but we cannot be 100 % sure of that,
2781 * since the CPU may have been faster to unstack than
2782 * the chip is able to stack. Hmmm ... But it seems that
2783 * such a situation is very unlikely to happen.
2785 * If this happen, for example STO caught by the CPU
2786 * then UDC happenning before the CPU have restarted
2787 * the SCRIPTS, the driver may wrongly complete the
2788 * same command on UDC, since the SCRIPTS didn't restart
2789 * and the DSA still points to the same command.
2790 * We avoid this situation by setting the DSA to an
2791 * invalid value when the CCB is completed and before
2792 * restarting the SCRIPTS.
2794 * Another issue is that we need some section of our
2795 * recovery procedures to be somehow uninterruptible but
2796 * the SCRIPTS processor does not provides such a
2797 * feature. For this reason, we handle recovery preferently
2798 * from the C code and check against some SCRIPTS critical
2799 * sections from the C code.
2801 * Hopefully, the interrupt handling of the driver is now
2802 * able to resist to weird BUS error conditions, but donnot
2803 * ask me for any guarantee that it will never fail. :-)
2804 * Use at your own decision and risk.
2807 void sym_interrupt (struct sym_hcb *np)
2809 u_char istat, istatc;
2814 * interrupt on the fly ?
2815 * (SCRIPTS may still be running)
2817 * A `dummy read' is needed to ensure that the
2818 * clear of the INTF flag reaches the device
2819 * and that posted writes are flushed to memory
2820 * before the scanning of the DONE queue.
2821 * Note that SCRIPTS also (dummy) read to memory
2822 * prior to deliver the INTF interrupt condition.
2824 istat = INB(np, nc_istat);
2826 OUTB(np, nc_istat, (istat & SIGP) | INTF | np->istat_sem);
2827 istat = INB(np, nc_istat); /* DUMMY READ */
2828 if (DEBUG_FLAGS & DEBUG_TINY) printf ("F ");
2829 sym_wakeup_done(np);
2832 if (!(istat & (SIP|DIP)))
2835 #if 0 /* We should never get this one */
2837 OUTB(np, nc_istat, CABRT);
2841 * PAR and MA interrupts may occur at the same time,
2842 * and we need to know of both in order to handle
2843 * this situation properly. We try to unstack SCSI
2844 * interrupts for that reason. BTW, I dislike a LOT
2845 * such a loop inside the interrupt routine.
2846 * Even if DMA interrupt stacking is very unlikely to
2847 * happen, we also try unstacking these ones, since
2848 * this has no performance impact.
2855 sist |= INW(np, nc_sist);
2857 dstat |= INB(np, nc_dstat);
2858 istatc = INB(np, nc_istat);
2860 } while (istatc & (SIP|DIP));
2862 if (DEBUG_FLAGS & DEBUG_TINY)
2863 printf ("<%d|%x:%x|%x:%x>",
2864 (int)INB(np, nc_scr0),
2866 (unsigned)INL(np, nc_dsp),
2867 (unsigned)INL(np, nc_dbc));
2869 * On paper, a memory read barrier may be needed here to
2870 * prevent out of order LOADs by the CPU from having
2871 * prefetched stale data prior to DMA having occurred.
2872 * And since we are paranoid ... :)
2874 MEMORY_READ_BARRIER();
2877 * First, interrupts we want to service cleanly.
2879 * Phase mismatch (MA) is the most frequent interrupt
2880 * for chip earlier than the 896 and so we have to service
2881 * it as quickly as possible.
2882 * A SCSI parity error (PAR) may be combined with a phase
2883 * mismatch condition (MA).
2884 * Programmed interrupts (SIR) are used to call the C code
2886 * The single step interrupt (SSI) is not used in this
2889 if (!(sist & (STO|GEN|HTH|SGE|UDC|SBMC|RST)) &&
2890 !(dstat & (MDPE|BF|ABRT|IID))) {
2891 if (sist & PAR) sym_int_par (np, sist);
2892 else if (sist & MA) sym_int_ma (np);
2893 else if (dstat & SIR) sym_int_sir (np);
2894 else if (dstat & SSI) OUTONB_STD();
2895 else goto unknown_int;
2900 * Now, interrupts that donnot happen in normal
2901 * situations and that we may need to recover from.
2903 * On SCSI RESET (RST), we reset everything.
2904 * On SCSI BUS MODE CHANGE (SBMC), we complete all
2905 * active CCBs with RESET status, prepare all devices
2906 * for negotiating again and restart the SCRIPTS.
2907 * On STO and UDC, we complete the CCB with the corres-
2908 * ponding status and restart the SCRIPTS.
2911 printf("%s: SCSI BUS reset detected.\n", sym_name(np));
2912 sym_start_up (np, 1);
2916 OUTB(np, nc_ctest3, np->rv_ctest3 | CLF); /* clear dma fifo */
2917 OUTB(np, nc_stest3, TE|CSF); /* clear scsi fifo */
2919 if (!(sist & (GEN|HTH|SGE)) &&
2920 !(dstat & (MDPE|BF|ABRT|IID))) {
2921 if (sist & SBMC) sym_int_sbmc (np);
2922 else if (sist & STO) sym_int_sto (np);
2923 else if (sist & UDC) sym_int_udc (np);
2924 else goto unknown_int;
2929 * Now, interrupts we are not able to recover cleanly.
2931 * Log message for hard errors.
2935 sym_log_hard_error(np, sist, dstat);
2937 if ((sist & (GEN|HTH|SGE)) ||
2938 (dstat & (MDPE|BF|ABRT|IID))) {
2939 sym_start_reset(np);
2945 * We just miss the cause of the interrupt. :(
2946 * Print a message. The timeout will do the real work.
2948 printf( "%s: unknown interrupt(s) ignored, "
2949 "ISTAT=0x%x DSTAT=0x%x SIST=0x%x\n",
2950 sym_name(np), istat, dstat, sist);
2954 * Dequeue from the START queue all CCBs that match
2955 * a given target/lun/task condition (-1 means all),
2956 * and move them from the BUSY queue to the COMP queue
2957 * with DID_SOFT_ERROR status condition.
2958 * This function is used during error handling/recovery.
2959 * It is called with SCRIPTS not running.
2962 sym_dequeue_from_squeue(struct sym_hcb *np, int i, int target, int lun, int task)
2968 * Make sure the starting index is within range.
2970 assert((i >= 0) && (i < 2*MAX_QUEUE));
2973 * Walk until end of START queue and dequeue every job
2974 * that matches the target/lun/task condition.
2977 while (i != np->squeueput) {
2978 cp = sym_ccb_from_dsa(np, scr_to_cpu(np->squeue[i]));
2980 #ifdef SYM_CONF_IARB_SUPPORT
2981 /* Forget hints for IARB, they may be no longer relevant */
2982 cp->host_flags &= ~HF_HINT_IARB;
2984 if ((target == -1 || cp->target == target) &&
2985 (lun == -1 || cp->lun == lun) &&
2986 (task == -1 || cp->tag == task)) {
2987 sym_set_cam_status(cp->cmd, DID_SOFT_ERROR);
2988 sym_remque(&cp->link_ccbq);
2989 sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq);
2993 np->squeue[j] = np->squeue[i];
2994 if ((j += 2) >= MAX_QUEUE*2) j = 0;
2996 if ((i += 2) >= MAX_QUEUE*2) i = 0;
2998 if (i != j) /* Copy back the idle task if needed */
2999 np->squeue[j] = np->squeue[i];
3000 np->squeueput = j; /* Update our current start queue pointer */
3006 * chip handler for bad SCSI status condition
3008 * In case of bad SCSI status, we unqueue all the tasks
3009 * currently queued to the controller but not yet started
3010 * and then restart the SCRIPTS processor immediately.
3012 * QUEUE FULL and BUSY conditions are handled the same way.
3013 * Basically all the not yet started tasks are requeued in
3014 * device queue and the queue is frozen until a completion.
3016 * For CHECK CONDITION and COMMAND TERMINATED status, we use
3017 * the CCB of the failed command to prepare a REQUEST SENSE
3018 * SCSI command and queue it to the controller queue.
3020 * SCRATCHA is assumed to have been loaded with STARTPOS
3021 * before the SCRIPTS called the C code.
3023 static void sym_sir_bad_scsi_status(struct sym_hcb *np, int num, struct sym_ccb *cp)
3026 u_char s_status = cp->ssss_status;
3027 u_char h_flags = cp->host_flags;
3032 * Compute the index of the next job to start from SCRIPTS.
3034 i = (INL(np, nc_scratcha) - np->squeue_ba) / 4;
3037 * The last CCB queued used for IARB hint may be
3038 * no longer relevant. Forget it.
3040 #ifdef SYM_CONF_IARB_SUPPORT
3046 * Now deal with the SCSI status.
3051 if (sym_verbose >= 2) {
3052 sym_print_addr(cp->cmd, "%s\n",
3053 s_status == S_BUSY ? "BUSY" : "QUEUE FULL\n");
3055 default: /* S_INT, S_INT_COND_MET, S_CONFLICT */
3056 sym_complete_error (np, cp);
3061 * If we get an SCSI error when requesting sense, give up.
3063 if (h_flags & HF_SENSE) {
3064 sym_complete_error (np, cp);
3069 * Dequeue all queued CCBs for that device not yet started,
3070 * and restart the SCRIPTS processor immediately.
3072 sym_dequeue_from_squeue(np, i, cp->target, cp->lun, -1);
3073 OUTL_DSP(np, SCRIPTA_BA(np, start));
3076 * Save some info of the actual IO.
3077 * Compute the data residual.
3079 cp->sv_scsi_status = cp->ssss_status;
3080 cp->sv_xerr_status = cp->xerr_status;
3081 cp->sv_resid = sym_compute_residual(np, cp);
3084 * Prepare all needed data structures for
3085 * requesting sense data.
3088 cp->scsi_smsg2[0] = IDENTIFY(0, cp->lun);
3092 * If we are currently using anything different from
3093 * async. 8 bit data transfers with that target,
3094 * start a negotiation, since the device may want
3095 * to report us a UNIT ATTENTION condition due to
3096 * a cause we currently ignore, and we donnot want
3097 * to be stuck with WIDE and/or SYNC data transfer.
3099 * cp->nego_status is filled by sym_prepare_nego().
3101 cp->nego_status = 0;
3102 msglen += sym_prepare_nego(np, cp, &cp->scsi_smsg2[msglen]);
3104 * Message table indirect structure.
3106 cp->phys.smsg.addr = CCB_BA(cp, scsi_smsg2);
3107 cp->phys.smsg.size = cpu_to_scr(msglen);
3112 cp->phys.cmd.addr = CCB_BA(cp, sensecmd);
3113 cp->phys.cmd.size = cpu_to_scr(6);
3116 * patch requested size into sense command
3118 cp->sensecmd[0] = REQUEST_SENSE;
3119 cp->sensecmd[1] = 0;
3120 if (cp->cmd->device->scsi_level <= SCSI_2 && cp->lun <= 7)
3121 cp->sensecmd[1] = cp->lun << 5;
3122 cp->sensecmd[4] = SYM_SNS_BBUF_LEN;
3123 cp->data_len = SYM_SNS_BBUF_LEN;
3128 memset(cp->sns_bbuf, 0, SYM_SNS_BBUF_LEN);
3129 cp->phys.sense.addr = CCB_BA(cp, sns_bbuf);
3130 cp->phys.sense.size = cpu_to_scr(SYM_SNS_BBUF_LEN);
3133 * requeue the command.
3135 startp = SCRIPTB_BA(np, sdata_in);
3137 cp->phys.head.savep = cpu_to_scr(startp);
3138 cp->phys.head.lastp = cpu_to_scr(startp);
3139 cp->startp = cpu_to_scr(startp);
3140 cp->goalp = cpu_to_scr(startp + 16);
3142 cp->host_xflags = 0;
3143 cp->host_status = cp->nego_status ? HS_NEGOTIATE : HS_BUSY;
3144 cp->ssss_status = S_ILLEGAL;
3145 cp->host_flags = (HF_SENSE|HF_DATA_IN);
3146 cp->xerr_status = 0;
3147 cp->extra_bytes = 0;
3149 cp->phys.head.go.start = cpu_to_scr(SCRIPTA_BA(np, select));
3152 * Requeue the command.
3154 sym_put_start_queue(np, cp);
3157 * Give back to upper layer everything we have dequeued.
3159 sym_flush_comp_queue(np, 0);
3165 * After a device has accepted some management message
3166 * as BUS DEVICE RESET, ABORT TASK, etc ..., or when
3167 * a device signals a UNIT ATTENTION condition, some
3168 * tasks are thrown away by the device. We are required
3169 * to reflect that on our tasks list since the device
3170 * will never complete these tasks.
3172 * This function move from the BUSY queue to the COMP
3173 * queue all disconnected CCBs for a given target that
3174 * match the following criteria:
3175 * - lun=-1 means any logical UNIT otherwise a given one.
3176 * - task=-1 means any task, otherwise a given one.
3178 int sym_clear_tasks(struct sym_hcb *np, int cam_status, int target, int lun, int task)
3180 SYM_QUEHEAD qtmp, *qp;
3185 * Move the entire BUSY queue to our temporary queue.
3187 sym_que_init(&qtmp);
3188 sym_que_splice(&np->busy_ccbq, &qtmp);
3189 sym_que_init(&np->busy_ccbq);
3192 * Put all CCBs that matches our criteria into
3193 * the COMP queue and put back other ones into
3196 while ((qp = sym_remque_head(&qtmp)) != 0) {
3197 struct scsi_cmnd *cmd;
3198 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
3200 if (cp->host_status != HS_DISCONNECT ||
3201 cp->target != target ||
3202 (lun != -1 && cp->lun != lun) ||
3204 (cp->tag != NO_TAG && cp->scsi_smsg[2] != task))) {
3205 sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq);
3208 sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq);
3210 /* Preserve the software timeout condition */
3211 if (sym_get_cam_status(cmd) != DID_TIME_OUT)
3212 sym_set_cam_status(cmd, cam_status);
3215 printf("XXXX TASK @%p CLEARED\n", cp);
3222 * chip handler for TASKS recovery
3224 * We cannot safely abort a command, while the SCRIPTS
3225 * processor is running, since we just would be in race
3228 * As long as we have tasks to abort, we keep the SEM
3229 * bit set in the ISTAT. When this bit is set, the
3230 * SCRIPTS processor interrupts (SIR_SCRIPT_STOPPED)
3231 * each time it enters the scheduler.
3233 * If we have to reset a target, clear tasks of a unit,
3234 * or to perform the abort of a disconnected job, we
3235 * restart the SCRIPTS for selecting the target. Once
3236 * selected, the SCRIPTS interrupts (SIR_TARGET_SELECTED).
3237 * If it loses arbitration, the SCRIPTS will interrupt again
3238 * the next time it will enter its scheduler, and so on ...
3240 * On SIR_TARGET_SELECTED, we scan for the more
3241 * appropriate thing to do:
3243 * - If nothing, we just sent a M_ABORT message to the
3244 * target to get rid of the useless SCSI bus ownership.
3245 * According to the specs, no tasks shall be affected.
3246 * - If the target is to be reset, we send it a M_RESET
3248 * - If a logical UNIT is to be cleared , we send the
3249 * IDENTIFY(lun) + M_ABORT.
3250 * - If an untagged task is to be aborted, we send the
3251 * IDENTIFY(lun) + M_ABORT.
3252 * - If a tagged task is to be aborted, we send the
3253 * IDENTIFY(lun) + task attributes + M_ABORT_TAG.
3255 * Once our 'kiss of death' :) message has been accepted
3256 * by the target, the SCRIPTS interrupts again
3257 * (SIR_ABORT_SENT). On this interrupt, we complete
3258 * all the CCBs that should have been aborted by the
3259 * target according to our message.
3261 static void sym_sir_task_recovery(struct sym_hcb *np, int num)
3265 struct sym_tcb *tp = NULL; /* gcc isn't quite smart enough yet */
3266 struct scsi_target *starget;
3267 int target=-1, lun=-1, task;
3272 * The SCRIPTS processor stopped before starting
3273 * the next command in order to allow us to perform
3274 * some task recovery.
3276 case SIR_SCRIPT_STOPPED:
3278 * Do we have any target to reset or unit to clear ?
3280 for (i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) {
3281 tp = &np->target[i];
3283 (tp->lun0p && tp->lun0p->to_clear)) {
3289 for (k = 1 ; k < SYM_CONF_MAX_LUN ; k++) {
3290 if (tp->lunmp[k] && tp->lunmp[k]->to_clear) {
3300 * If not, walk the busy queue for any
3301 * disconnected CCB to be aborted.
3304 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
3305 cp = sym_que_entry(qp,struct sym_ccb,link_ccbq);
3306 if (cp->host_status != HS_DISCONNECT)
3309 target = cp->target;
3316 * If some target is to be selected,
3317 * prepare and start the selection.
3320 tp = &np->target[target];
3321 np->abrt_sel.sel_id = target;
3322 np->abrt_sel.sel_scntl3 = tp->head.wval;
3323 np->abrt_sel.sel_sxfer = tp->head.sval;
3324 OUTL(np, nc_dsa, np->hcb_ba);
3325 OUTL_DSP(np, SCRIPTB_BA(np, sel_for_abort));
3330 * Now look for a CCB to abort that haven't started yet.
3331 * Btw, the SCRIPTS processor is still stopped, so
3332 * we are not in race.
3336 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
3337 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
3338 if (cp->host_status != HS_BUSY &&
3339 cp->host_status != HS_NEGOTIATE)
3343 #ifdef SYM_CONF_IARB_SUPPORT
3345 * If we are using IMMEDIATE ARBITRATION, we donnot
3346 * want to cancel the last queued CCB, since the
3347 * SCRIPTS may have anticipated the selection.
3349 if (cp == np->last_cp) {
3354 i = 1; /* Means we have found some */
3359 * We are done, so we donnot need
3360 * to synchronize with the SCRIPTS anylonger.
3361 * Remove the SEM flag from the ISTAT.
3364 OUTB(np, nc_istat, SIGP);
3368 * Compute index of next position in the start
3369 * queue the SCRIPTS intends to start and dequeue
3370 * all CCBs for that device that haven't been started.
3372 i = (INL(np, nc_scratcha) - np->squeue_ba) / 4;
3373 i = sym_dequeue_from_squeue(np, i, cp->target, cp->lun, -1);
3376 * Make sure at least our IO to abort has been dequeued.
3378 #ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
3379 assert(i && sym_get_cam_status(cp->cmd) == DID_SOFT_ERROR);
3381 sym_remque(&cp->link_ccbq);
3382 sym_insque_tail(&cp->link_ccbq, &np->comp_ccbq);
3385 * Keep track in cam status of the reason of the abort.
3387 if (cp->to_abort == 2)
3388 sym_set_cam_status(cp->cmd, DID_TIME_OUT);
3390 sym_set_cam_status(cp->cmd, DID_ABORT);
3393 * Complete with error everything that we have dequeued.
3395 sym_flush_comp_queue(np, 0);
3398 * The SCRIPTS processor has selected a target
3399 * we may have some manual recovery to perform for.
3401 case SIR_TARGET_SELECTED:
3402 target = INB(np, nc_sdid) & 0xf;
3403 tp = &np->target[target];
3405 np->abrt_tbl.addr = cpu_to_scr(vtobus(np->abrt_msg));
3408 * If the target is to be reset, prepare a
3409 * M_RESET message and clear the to_reset flag
3410 * since we donnot expect this operation to fail.
3413 np->abrt_msg[0] = M_RESET;
3414 np->abrt_tbl.size = 1;
3420 * Otherwise, look for some logical unit to be cleared.
3422 if (tp->lun0p && tp->lun0p->to_clear)
3424 else if (tp->lunmp) {
3425 for (k = 1 ; k < SYM_CONF_MAX_LUN ; k++) {
3426 if (tp->lunmp[k] && tp->lunmp[k]->to_clear) {
3434 * If a logical unit is to be cleared, prepare
3435 * an IDENTIFY(lun) + ABORT MESSAGE.
3438 struct sym_lcb *lp = sym_lp(tp, lun);
3439 lp->to_clear = 0; /* We don't expect to fail here */
3440 np->abrt_msg[0] = IDENTIFY(0, lun);
3441 np->abrt_msg[1] = M_ABORT;
3442 np->abrt_tbl.size = 2;
3447 * Otherwise, look for some disconnected job to
3448 * abort for this target.
3452 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
3453 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
3454 if (cp->host_status != HS_DISCONNECT)
3456 if (cp->target != target)
3460 i = 1; /* Means we have some */
3465 * If we have none, probably since the device has
3466 * completed the command before we won abitration,
3467 * send a M_ABORT message without IDENTIFY.
3468 * According to the specs, the device must just
3469 * disconnect the BUS and not abort any task.
3472 np->abrt_msg[0] = M_ABORT;
3473 np->abrt_tbl.size = 1;
3478 * We have some task to abort.
3479 * Set the IDENTIFY(lun)
3481 np->abrt_msg[0] = IDENTIFY(0, cp->lun);
3484 * If we want to abort an untagged command, we
3485 * will send a IDENTIFY + M_ABORT.
3486 * Otherwise (tagged command), we will send
3487 * a IDENTITFY + task attributes + ABORT TAG.
3489 if (cp->tag == NO_TAG) {
3490 np->abrt_msg[1] = M_ABORT;
3491 np->abrt_tbl.size = 2;
3493 np->abrt_msg[1] = cp->scsi_smsg[1];
3494 np->abrt_msg[2] = cp->scsi_smsg[2];
3495 np->abrt_msg[3] = M_ABORT_TAG;
3496 np->abrt_tbl.size = 4;
3499 * Keep track of software timeout condition, since the
3500 * peripheral driver may not count retries on abort
3501 * conditions not due to timeout.
3503 if (cp->to_abort == 2)
3504 sym_set_cam_status(cp->cmd, DID_TIME_OUT);
3505 cp->to_abort = 0; /* We donnot expect to fail here */
3509 * The target has accepted our message and switched
3510 * to BUS FREE phase as we expected.
3512 case SIR_ABORT_SENT:
3513 target = INB(np, nc_sdid) & 0xf;
3514 tp = &np->target[target];
3515 starget = tp->starget;
3518 ** If we didn't abort anything, leave here.
3520 if (np->abrt_msg[0] == M_ABORT)
3524 * If we sent a M_RESET, then a hardware reset has
3525 * been performed by the target.
3526 * - Reset everything to async 8 bit
3527 * - Tell ourself to negotiate next time :-)
3528 * - Prepare to clear all disconnected CCBs for
3529 * this target from our task list (lun=task=-1)
3533 if (np->abrt_msg[0] == M_RESET) {
3535 tp->head.wval = np->rv_scntl3;
3537 spi_period(starget) = 0;
3538 spi_offset(starget) = 0;
3539 spi_width(starget) = 0;
3540 spi_iu(starget) = 0;
3541 spi_dt(starget) = 0;
3542 spi_qas(starget) = 0;
3543 tp->tgoal.check_nego = 1;
3547 * Otherwise, check for the LUN and TASK(s)
3548 * concerned by the cancelation.
3549 * If it is not ABORT_TAG then it is CLEAR_QUEUE
3550 * or an ABORT message :-)
3553 lun = np->abrt_msg[0] & 0x3f;
3554 if (np->abrt_msg[1] == M_ABORT_TAG)
3555 task = np->abrt_msg[2];
3559 * Complete all the CCBs the device should have
3560 * aborted due to our 'kiss of death' message.
3562 i = (INL(np, nc_scratcha) - np->squeue_ba) / 4;
3563 sym_dequeue_from_squeue(np, i, target, lun, -1);
3564 sym_clear_tasks(np, DID_ABORT, target, lun, task);
3565 sym_flush_comp_queue(np, 0);
3568 * If we sent a BDR, make upper layer aware of that.
3570 if (np->abrt_msg[0] == M_RESET)
3571 sym_xpt_async_sent_bdr(np, target);
3576 * Print to the log the message we intend to send.
3578 if (num == SIR_TARGET_SELECTED) {
3579 dev_info(&tp->starget->dev, "control msgout:");
3580 sym_printl_hex(np->abrt_msg, np->abrt_tbl.size);
3581 np->abrt_tbl.size = cpu_to_scr(np->abrt_tbl.size);
3585 * Let the SCRIPTS processor continue.
3591 * Gerard's alchemy:) that deals with with the data
3592 * pointer for both MDP and the residual calculation.
3594 * I didn't want to bloat the code by more than 200
3595 * lines for the handling of both MDP and the residual.
3596 * This has been achieved by using a data pointer
3597 * representation consisting in an index in the data
3598 * array (dp_sg) and a negative offset (dp_ofs) that
3599 * have the following meaning:
3601 * - dp_sg = SYM_CONF_MAX_SG
3602 * we are at the end of the data script.
3603 * - dp_sg < SYM_CONF_MAX_SG
3604 * dp_sg points to the next entry of the scatter array
3605 * we want to transfer.
3607 * dp_ofs represents the residual of bytes of the
3608 * previous entry scatter entry we will send first.
3610 * no residual to send first.
3612 * The function sym_evaluate_dp() accepts an arbitray
3613 * offset (basically from the MDP message) and returns
3614 * the corresponding values of dp_sg and dp_ofs.
3617 static int sym_evaluate_dp(struct sym_hcb *np, struct sym_ccb *cp, u32 scr, int *ofs)
3620 int dp_ofs, dp_sg, dp_sgmin;
3625 * Compute the resulted data pointer in term of a script
3626 * address within some DATA script and a signed byte offset.
3630 if (dp_scr == SCRIPTA_BA(np, pm0_data))
3632 else if (dp_scr == SCRIPTA_BA(np, pm1_data))
3638 dp_scr = scr_to_cpu(pm->ret);
3639 dp_ofs -= scr_to_cpu(pm->sg.size);
3643 * If we are auto-sensing, then we are done.
3645 if (cp->host_flags & HF_SENSE) {
3651 * Deduce the index of the sg entry.
3652 * Keep track of the index of the first valid entry.
3653 * If result is dp_sg = SYM_CONF_MAX_SG, then we are at the
3656 tmp = scr_to_cpu(sym_goalp(cp));
3657 dp_sg = SYM_CONF_MAX_SG;
3659 dp_sg -= (tmp - 8 - (int)dp_scr) / (2*4);
3660 dp_sgmin = SYM_CONF_MAX_SG - cp->segments;
3663 * Move to the sg entry the data pointer belongs to.
3665 * If we are inside the data area, we expect result to be:
3668 * dp_ofs = 0 and dp_sg is the index of the sg entry
3669 * the data pointer belongs to (or the end of the data)
3671 * dp_ofs < 0 and dp_sg is the index of the sg entry
3672 * the data pointer belongs to + 1.
3676 while (dp_sg > dp_sgmin) {
3678 tmp = scr_to_cpu(cp->phys.data[dp_sg].size);
3679 n = dp_ofs + (tmp & 0xffffff);
3687 else if (dp_ofs > 0) {
3688 while (dp_sg < SYM_CONF_MAX_SG) {
3689 tmp = scr_to_cpu(cp->phys.data[dp_sg].size);
3690 dp_ofs -= (tmp & 0xffffff);
3698 * Make sure the data pointer is inside the data area.
3699 * If not, return some error.
3701 if (dp_sg < dp_sgmin || (dp_sg == dp_sgmin && dp_ofs < 0))
3703 else if (dp_sg > SYM_CONF_MAX_SG ||
3704 (dp_sg == SYM_CONF_MAX_SG && dp_ofs > 0))
3708 * Save the extreme pointer if needed.
3710 if (dp_sg > cp->ext_sg ||
3711 (dp_sg == cp->ext_sg && dp_ofs > cp->ext_ofs)) {
3713 cp->ext_ofs = dp_ofs;
3727 * chip handler for MODIFY DATA POINTER MESSAGE
3729 * We also call this function on IGNORE WIDE RESIDUE
3730 * messages that do not match a SWIDE full condition.
3731 * Btw, we assume in that situation that such a message
3732 * is equivalent to a MODIFY DATA POINTER (offset=-1).
3735 static void sym_modify_dp(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp, int ofs)
3738 u32 dp_scr = sym_get_script_dp (np, cp);
3746 * Not supported for auto-sense.
3748 if (cp->host_flags & HF_SENSE)
3752 * Apply our alchemy:) (see comments in sym_evaluate_dp()),
3753 * to the resulted data pointer.
3755 dp_sg = sym_evaluate_dp(np, cp, dp_scr, &dp_ofs);
3760 * And our alchemy:) allows to easily calculate the data
3761 * script address we want to return for the next data phase.
3763 dp_ret = cpu_to_scr(sym_goalp(cp));
3764 dp_ret = dp_ret - 8 - (SYM_CONF_MAX_SG - dp_sg) * (2*4);
3767 * If offset / scatter entry is zero we donnot need
3768 * a context for the new current data pointer.
3776 * Get a context for the new current data pointer.
3778 hflags = INB(np, HF_PRT);
3780 if (hflags & HF_DP_SAVED)
3781 hflags ^= HF_ACT_PM;
3783 if (!(hflags & HF_ACT_PM)) {
3785 dp_scr = SCRIPTA_BA(np, pm0_data);
3789 dp_scr = SCRIPTA_BA(np, pm1_data);
3792 hflags &= ~(HF_DP_SAVED);
3794 OUTB(np, HF_PRT, hflags);
3797 * Set up the new current data pointer.
3798 * ofs < 0 there, and for the next data phase, we
3799 * want to transfer part of the data of the sg entry
3800 * corresponding to index dp_sg-1 prior to returning
3801 * to the main data script.
3803 pm->ret = cpu_to_scr(dp_ret);
3804 tmp = scr_to_cpu(cp->phys.data[dp_sg-1].addr);
3805 tmp += scr_to_cpu(cp->phys.data[dp_sg-1].size) + dp_ofs;
3806 pm->sg.addr = cpu_to_scr(tmp);
3807 pm->sg.size = cpu_to_scr(-dp_ofs);
3810 sym_set_script_dp (np, cp, dp_scr);
3811 OUTL_DSP(np, SCRIPTA_BA(np, clrack));
3815 OUTL_DSP(np, SCRIPTB_BA(np, msg_bad));
3820 * chip calculation of the data residual.
3822 * As I used to say, the requirement of data residual
3823 * in SCSI is broken, useless and cannot be achieved
3824 * without huge complexity.
3825 * But most OSes and even the official CAM require it.
3826 * When stupidity happens to be so widely spread inside
3827 * a community, it gets hard to convince.
3829 * Anyway, I don't care, since I am not going to use
3830 * any software that considers this data residual as
3831 * a relevant information. :)
3834 int sym_compute_residual(struct sym_hcb *np, struct sym_ccb *cp)
3836 int dp_sg, dp_sgmin, resid = 0;
3840 * Check for some data lost or just thrown away.
3841 * We are not required to be quite accurate in this
3842 * situation. Btw, if we are odd for output and the
3843 * device claims some more data, it may well happen
3844 * than our residual be zero. :-)
3846 if (cp->xerr_status & (XE_EXTRA_DATA|XE_SODL_UNRUN|XE_SWIDE_OVRUN)) {
3847 if (cp->xerr_status & XE_EXTRA_DATA)
3848 resid -= cp->extra_bytes;
3849 if (cp->xerr_status & XE_SODL_UNRUN)
3851 if (cp->xerr_status & XE_SWIDE_OVRUN)
3856 * If all data has been transferred,
3857 * there is no residual.
3859 if (cp->phys.head.lastp == sym_goalp(cp))
3863 * If no data transfer occurs, or if the data
3864 * pointer is weird, return full residual.
3866 if (cp->startp == cp->phys.head.lastp ||
3867 sym_evaluate_dp(np, cp, scr_to_cpu(cp->phys.head.lastp),
3869 return cp->data_len;
3873 * If we were auto-sensing, then we are done.
3875 if (cp->host_flags & HF_SENSE) {
3880 * We are now full comfortable in the computation
3881 * of the data residual (2's complement).
3883 dp_sgmin = SYM_CONF_MAX_SG - cp->segments;
3884 resid = -cp->ext_ofs;
3885 for (dp_sg = cp->ext_sg; dp_sg < SYM_CONF_MAX_SG; ++dp_sg) {
3886 u_int tmp = scr_to_cpu(cp->phys.data[dp_sg].size);
3887 resid += (tmp & 0xffffff);
3890 resid -= cp->odd_byte_adjustment;
3893 * Hopefully, the result is not too wrong.
3899 * Negotiation for WIDE and SYNCHRONOUS DATA TRANSFER.
3901 * When we try to negotiate, we append the negotiation message
3902 * to the identify and (maybe) simple tag message.
3903 * The host status field is set to HS_NEGOTIATE to mark this
3906 * If the target doesn't answer this message immediately
3907 * (as required by the standard), the SIR_NEGO_FAILED interrupt
3908 * will be raised eventually.
3909 * The handler removes the HS_NEGOTIATE status, and sets the
3910 * negotiated value to the default (async / nowide).
3912 * If we receive a matching answer immediately, we check it
3913 * for validity, and set the values.
3915 * If we receive a Reject message immediately, we assume the
3916 * negotiation has failed, and fall back to standard values.
3918 * If we receive a negotiation message while not in HS_NEGOTIATE
3919 * state, it's a target initiated negotiation. We prepare a
3920 * (hopefully) valid answer, set our parameters, and send back
3921 * this answer to the target.
3923 * If the target doesn't fetch the answer (no message out phase),
3924 * we assume the negotiation has failed, and fall back to default
3925 * settings (SIR_NEGO_PROTO interrupt).
3927 * When we set the values, we adjust them in all ccbs belonging
3928 * to this target, in the controller's register, and in the "phys"
3929 * field of the controller's struct sym_hcb.
3933 * chip handler for SYNCHRONOUS DATA TRANSFER REQUEST (SDTR) message.
3936 sym_sync_nego_check(struct sym_hcb *np, int req, struct sym_ccb *cp)
3938 int target = cp->target;
3939 u_char chg, ofs, per, fak, div;
3941 if (DEBUG_FLAGS & DEBUG_NEGO) {
3942 sym_print_nego_msg(np, target, "sync msgin", np->msgin);
3946 * Get requested values.
3953 * Check values against our limits.
3956 if (ofs > np->maxoffs)
3957 {chg = 1; ofs = np->maxoffs;}
3961 if (per < np->minsync)
3962 {chg = 1; per = np->minsync;}
3966 * Get new chip synchronous parameters value.
3969 if (ofs && sym_getsync(np, 0, per, &div, &fak) < 0)
3972 if (DEBUG_FLAGS & DEBUG_NEGO) {
3973 sym_print_addr(cp->cmd,
3974 "sdtr: ofs=%d per=%d div=%d fak=%d chg=%d.\n",
3975 ofs, per, div, fak, chg);
3979 * If it was an answer we want to change,
3980 * then it isn't acceptable. Reject it.
3988 sym_setsync (np, target, ofs, per, div, fak);
3991 * It was an answer. We are done.
3997 * It was a request. Prepare an answer message.
3999 np->msgout[0] = M_EXTENDED;
4001 np->msgout[2] = M_X_SYNC_REQ;
4002 np->msgout[3] = per;
4003 np->msgout[4] = ofs;
4005 if (DEBUG_FLAGS & DEBUG_NEGO) {
4006 sym_print_nego_msg(np, target, "sync msgout", np->msgout);
4009 np->msgin [0] = M_NOOP;
4014 sym_setsync (np, target, 0, 0, 0, 0);
4018 static void sym_sync_nego(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp)
4024 * Request or answer ?
4026 if (INB(np, HS_PRT) == HS_NEGOTIATE) {
4027 OUTB(np, HS_PRT, HS_BUSY);
4028 if (cp->nego_status && cp->nego_status != NS_SYNC)
4034 * Check and apply new values.
4036 result = sym_sync_nego_check(np, req, cp);
4037 if (result) /* Not acceptable, reject it */
4039 if (req) { /* Was a request, send response. */
4040 cp->nego_status = NS_SYNC;
4041 OUTL_DSP(np, SCRIPTB_BA(np, sdtr_resp));
4043 else /* Was a response, we are done. */
4044 OUTL_DSP(np, SCRIPTA_BA(np, clrack));
4048 OUTL_DSP(np, SCRIPTB_BA(np, msg_bad));
4052 * chip handler for PARALLEL PROTOCOL REQUEST (PPR) message.
4055 sym_ppr_nego_check(struct sym_hcb *np, int req, int target)
4057 struct sym_tcb *tp = &np->target[target];
4058 unsigned char fak, div;
4061 unsigned char per = np->msgin[3];
4062 unsigned char ofs = np->msgin[5];
4063 unsigned char wide = np->msgin[6];
4064 unsigned char opts = np->msgin[7] & PPR_OPT_MASK;
4066 if (DEBUG_FLAGS & DEBUG_NEGO) {
4067 sym_print_nego_msg(np, target, "ppr msgin", np->msgin);
4071 * Check values against our limits.
4073 if (wide > np->maxwide) {
4077 if (!wide || !(np->features & FE_U3EN))
4080 if (opts != (np->msgin[7] & PPR_OPT_MASK))
4083 dt = opts & PPR_OPT_DT;
4086 unsigned char maxoffs = dt ? np->maxoffs_dt : np->maxoffs;
4087 if (ofs > maxoffs) {
4094 unsigned char minsync = dt ? np->minsync_dt : np->minsync;
4095 if (per < minsync) {
4102 * Get new chip synchronous parameters value.
4105 if (ofs && sym_getsync(np, dt, per, &div, &fak) < 0)
4109 * If it was an answer we want to change,
4110 * then it isn't acceptable. Reject it.
4118 sym_setpprot(np, target, opts, ofs, per, wide, div, fak);
4121 * It was an answer. We are done.
4127 * It was a request. Prepare an answer message.
4129 np->msgout[0] = M_EXTENDED;
4131 np->msgout[2] = M_X_PPR_REQ;
4132 np->msgout[3] = per;
4134 np->msgout[5] = ofs;
4135 np->msgout[6] = wide;
4136 np->msgout[7] = opts;
4138 if (DEBUG_FLAGS & DEBUG_NEGO) {
4139 sym_print_nego_msg(np, target, "ppr msgout", np->msgout);
4142 np->msgin [0] = M_NOOP;
4147 sym_setpprot (np, target, 0, 0, 0, 0, 0, 0);
4149 * If it is a device response that should result in
4150 * ST, we may want to try a legacy negotiation later.
4152 if (!req && !opts) {
4153 tp->tgoal.period = per;
4154 tp->tgoal.offset = ofs;
4155 tp->tgoal.width = wide;
4156 tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0;
4157 tp->tgoal.check_nego = 1;
4162 static void sym_ppr_nego(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp)
4168 * Request or answer ?
4170 if (INB(np, HS_PRT) == HS_NEGOTIATE) {
4171 OUTB(np, HS_PRT, HS_BUSY);
4172 if (cp->nego_status && cp->nego_status != NS_PPR)
4178 * Check and apply new values.
4180 result = sym_ppr_nego_check(np, req, cp->target);
4181 if (result) /* Not acceptable, reject it */
4183 if (req) { /* Was a request, send response. */
4184 cp->nego_status = NS_PPR;
4185 OUTL_DSP(np, SCRIPTB_BA(np, ppr_resp));
4187 else /* Was a response, we are done. */
4188 OUTL_DSP(np, SCRIPTA_BA(np, clrack));
4192 OUTL_DSP(np, SCRIPTB_BA(np, msg_bad));
4196 * chip handler for WIDE DATA TRANSFER REQUEST (WDTR) message.
4199 sym_wide_nego_check(struct sym_hcb *np, int req, struct sym_ccb *cp)
4201 int target = cp->target;
4204 if (DEBUG_FLAGS & DEBUG_NEGO) {
4205 sym_print_nego_msg(np, target, "wide msgin", np->msgin);
4209 * Get requested values.
4212 wide = np->msgin[3];
4215 * Check values against our limits.
4217 if (wide > np->maxwide) {
4222 if (DEBUG_FLAGS & DEBUG_NEGO) {
4223 sym_print_addr(cp->cmd, "wdtr: wide=%d chg=%d.\n",
4228 * If it was an answer we want to change,
4229 * then it isn't acceptable. Reject it.
4237 sym_setwide (np, target, wide);
4240 * It was an answer. We are done.
4246 * It was a request. Prepare an answer message.
4248 np->msgout[0] = M_EXTENDED;
4250 np->msgout[2] = M_X_WIDE_REQ;
4251 np->msgout[3] = wide;
4253 np->msgin [0] = M_NOOP;
4255 if (DEBUG_FLAGS & DEBUG_NEGO) {
4256 sym_print_nego_msg(np, target, "wide msgout", np->msgout);
4265 static void sym_wide_nego(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp)
4271 * Request or answer ?
4273 if (INB(np, HS_PRT) == HS_NEGOTIATE) {
4274 OUTB(np, HS_PRT, HS_BUSY);
4275 if (cp->nego_status && cp->nego_status != NS_WIDE)
4281 * Check and apply new values.
4283 result = sym_wide_nego_check(np, req, cp);
4284 if (result) /* Not acceptable, reject it */
4286 if (req) { /* Was a request, send response. */
4287 cp->nego_status = NS_WIDE;
4288 OUTL_DSP(np, SCRIPTB_BA(np, wdtr_resp));
4289 } else { /* Was a response. */
4291 * Negotiate for SYNC immediately after WIDE response.
4292 * This allows to negotiate for both WIDE and SYNC on
4293 * a single SCSI command (Suggested by Justin Gibbs).
4295 if (tp->tgoal.offset) {
4296 np->msgout[0] = M_EXTENDED;
4298 np->msgout[2] = M_X_SYNC_REQ;
4299 np->msgout[3] = tp->tgoal.period;
4300 np->msgout[4] = tp->tgoal.offset;
4302 if (DEBUG_FLAGS & DEBUG_NEGO) {
4303 sym_print_nego_msg(np, cp->target,
4304 "sync msgout", np->msgout);
4307 cp->nego_status = NS_SYNC;
4308 OUTB(np, HS_PRT, HS_NEGOTIATE);
4309 OUTL_DSP(np, SCRIPTB_BA(np, sdtr_resp));
4312 OUTL_DSP(np, SCRIPTA_BA(np, clrack));
4318 OUTL_DSP(np, SCRIPTB_BA(np, msg_bad));
4322 * Reset DT, SYNC or WIDE to default settings.
4324 * Called when a negotiation does not succeed either
4325 * on rejection or on protocol error.
4327 * A target that understands a PPR message should never
4328 * reject it, and messing with it is very unlikely.
4329 * So, if a PPR makes problems, we may just want to
4330 * try a legacy negotiation later.
4332 static void sym_nego_default(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp)
4334 switch (cp->nego_status) {
4337 sym_setpprot (np, cp->target, 0, 0, 0, 0, 0, 0);
4339 if (tp->tgoal.period < np->minsync)
4340 tp->tgoal.period = np->minsync;
4341 if (tp->tgoal.offset > np->maxoffs)
4342 tp->tgoal.offset = np->maxoffs;
4343 tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0;
4344 tp->tgoal.check_nego = 1;
4348 sym_setsync (np, cp->target, 0, 0, 0, 0);
4351 sym_setwide (np, cp->target, 0);
4354 np->msgin [0] = M_NOOP;
4355 np->msgout[0] = M_NOOP;
4356 cp->nego_status = 0;
4360 * chip handler for MESSAGE REJECT received in response to
4361 * PPR, WIDE or SYNCHRONOUS negotiation.
4363 static void sym_nego_rejected(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb *cp)
4365 sym_nego_default(np, tp, cp);
4366 OUTB(np, HS_PRT, HS_BUSY);
4370 * chip exception handler for programmed interrupts.
4372 static void sym_int_sir (struct sym_hcb *np)
4374 u_char num = INB(np, nc_dsps);
4375 u32 dsa = INL(np, nc_dsa);
4376 struct sym_ccb *cp = sym_ccb_from_dsa(np, dsa);
4377 u_char target = INB(np, nc_sdid) & 0x0f;
4378 struct sym_tcb *tp = &np->target[target];
4381 if (DEBUG_FLAGS & DEBUG_TINY) printf ("I#%d", num);
4384 #if SYM_CONF_DMA_ADDRESSING_MODE == 2
4386 * SCRIPTS tell us that we may have to update
4387 * 64 bit DMA segment registers.
4389 case SIR_DMAP_DIRTY:
4390 sym_update_dmap_regs(np);
4394 * Command has been completed with error condition
4395 * or has been auto-sensed.
4397 case SIR_COMPLETE_ERROR:
4398 sym_complete_error(np, cp);
4401 * The C code is currently trying to recover from something.
4402 * Typically, user want to abort some command.
4404 case SIR_SCRIPT_STOPPED:
4405 case SIR_TARGET_SELECTED:
4406 case SIR_ABORT_SENT:
4407 sym_sir_task_recovery(np, num);
4410 * The device didn't go to MSG OUT phase after having
4411 * been selected with ATN. We donnot want to handle
4414 case SIR_SEL_ATN_NO_MSG_OUT:
4415 printf ("%s:%d: No MSG OUT phase after selection with ATN.\n",
4416 sym_name (np), target);
4419 * The device didn't switch to MSG IN phase after
4420 * having reseleted the initiator.
4422 case SIR_RESEL_NO_MSG_IN:
4423 printf ("%s:%d: No MSG IN phase after reselection.\n",
4424 sym_name (np), target);
4427 * After reselection, the device sent a message that wasn't
4430 case SIR_RESEL_NO_IDENTIFY:
4431 printf ("%s:%d: No IDENTIFY after reselection.\n",
4432 sym_name (np), target);
4435 * The device reselected a LUN we donnot know about.
4437 case SIR_RESEL_BAD_LUN:
4438 np->msgout[0] = M_RESET;
4441 * The device reselected for an untagged nexus and we
4444 case SIR_RESEL_BAD_I_T_L:
4445 np->msgout[0] = M_ABORT;
4448 * The device reselected for a tagged nexus that we donnot
4451 case SIR_RESEL_BAD_I_T_L_Q:
4452 np->msgout[0] = M_ABORT_TAG;
4455 * The SCRIPTS let us know that the device has grabbed
4456 * our message and will abort the job.
4458 case SIR_RESEL_ABORTED:
4459 np->lastmsg = np->msgout[0];
4460 np->msgout[0] = M_NOOP;
4461 printf ("%s:%d: message %x sent on bad reselection.\n",
4462 sym_name (np), target, np->lastmsg);
4465 * The SCRIPTS let us know that a message has been
4466 * successfully sent to the device.
4468 case SIR_MSG_OUT_DONE:
4469 np->lastmsg = np->msgout[0];
4470 np->msgout[0] = M_NOOP;
4471 /* Should we really care of that */
4472 if (np->lastmsg == M_PARITY || np->lastmsg == M_ID_ERROR) {
4474 cp->xerr_status &= ~XE_PARITY_ERR;
4475 if (!cp->xerr_status)
4476 OUTOFFB(np, HF_PRT, HF_EXT_ERR);
4481 * The device didn't send a GOOD SCSI status.
4482 * We may have some work to do prior to allow
4483 * the SCRIPTS processor to continue.
4485 case SIR_BAD_SCSI_STATUS:
4488 sym_sir_bad_scsi_status(np, num, cp);
4491 * We are asked by the SCRIPTS to prepare a
4494 case SIR_REJECT_TO_SEND:
4495 sym_print_msg(cp, "M_REJECT to send for ", np->msgin);
4496 np->msgout[0] = M_REJECT;
4499 * We have been ODD at the end of a DATA IN
4500 * transfer and the device didn't send a
4501 * IGNORE WIDE RESIDUE message.
4502 * It is a data overrun condition.
4504 case SIR_SWIDE_OVERRUN:
4506 OUTONB(np, HF_PRT, HF_EXT_ERR);
4507 cp->xerr_status |= XE_SWIDE_OVRUN;
4511 * We have been ODD at the end of a DATA OUT
4513 * It is a data underrun condition.
4515 case SIR_SODL_UNDERRUN:
4517 OUTONB(np, HF_PRT, HF_EXT_ERR);
4518 cp->xerr_status |= XE_SODL_UNRUN;
4522 * The device wants us to tranfer more data than
4523 * expected or in the wrong direction.
4524 * The number of extra bytes is in scratcha.
4525 * It is a data overrun condition.
4527 case SIR_DATA_OVERRUN:
4529 OUTONB(np, HF_PRT, HF_EXT_ERR);
4530 cp->xerr_status |= XE_EXTRA_DATA;
4531 cp->extra_bytes += INL(np, nc_scratcha);
4535 * The device switched to an illegal phase (4/5).
4539 OUTONB(np, HF_PRT, HF_EXT_ERR);
4540 cp->xerr_status |= XE_BAD_PHASE;
4544 * We received a message.
4546 case SIR_MSG_RECEIVED:
4549 switch (np->msgin [0]) {
4551 * We received an extended message.
4552 * We handle MODIFY DATA POINTER, SDTR, WDTR
4553 * and reject all other extended messages.
4556 switch (np->msgin [2]) {
4558 if (DEBUG_FLAGS & DEBUG_POINTER)
4559 sym_print_msg(cp,"modify DP",np->msgin);
4560 tmp = (np->msgin[3]<<24) + (np->msgin[4]<<16) +
4561 (np->msgin[5]<<8) + (np->msgin[6]);
4562 sym_modify_dp(np, tp, cp, tmp);
4565 sym_sync_nego(np, tp, cp);
4568 sym_ppr_nego(np, tp, cp);
4571 sym_wide_nego(np, tp, cp);
4578 * We received a 1/2 byte message not handled from SCRIPTS.
4579 * We are only expecting MESSAGE REJECT and IGNORE WIDE
4580 * RESIDUE messages that haven't been anticipated by
4581 * SCRIPTS on SWIDE full condition. Unanticipated IGNORE
4582 * WIDE RESIDUE messages are aliased as MODIFY DP (-1).
4585 if (DEBUG_FLAGS & DEBUG_POINTER)
4586 sym_print_msg(cp,"ign wide residue", np->msgin);
4587 if (cp->host_flags & HF_SENSE)
4588 OUTL_DSP(np, SCRIPTA_BA(np, clrack));
4590 sym_modify_dp(np, tp, cp, -1);
4593 if (INB(np, HS_PRT) == HS_NEGOTIATE)
4594 sym_nego_rejected(np, tp, cp);
4596 sym_print_addr(cp->cmd,
4597 "M_REJECT received (%x:%x).\n",
4598 scr_to_cpu(np->lastmsg), np->msgout[0]);
4607 * We received an unknown message.
4608 * Ignore all MSG IN phases and reject it.
4611 sym_print_msg(cp, "WEIRD message received", np->msgin);
4612 OUTL_DSP(np, SCRIPTB_BA(np, msg_weird));
4615 * Negotiation failed.
4616 * Target does not send us the reply.
4617 * Remove the HS_NEGOTIATE status.
4619 case SIR_NEGO_FAILED:
4620 OUTB(np, HS_PRT, HS_BUSY);
4622 * Negotiation failed.
4623 * Target does not want answer message.
4625 case SIR_NEGO_PROTO:
4626 sym_nego_default(np, tp, cp);
4634 OUTL_DSP(np, SCRIPTB_BA(np, msg_bad));
4637 OUTL_DSP(np, SCRIPTA_BA(np, clrack));
4644 * Acquire a control block
4646 struct sym_ccb *sym_get_ccb (struct sym_hcb *np, struct scsi_cmnd *cmd, u_char tag_order)
4648 u_char tn = cmd->device->id;
4649 u_char ln = cmd->device->lun;
4650 struct sym_tcb *tp = &np->target[tn];
4651 struct sym_lcb *lp = sym_lp(tp, ln);
4652 u_short tag = NO_TAG;
4654 struct sym_ccb *cp = NULL;
4657 * Look for a free CCB
4659 if (sym_que_empty(&np->free_ccbq))
4661 qp = sym_remque_head(&np->free_ccbq);
4664 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
4666 #ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
4668 * If the LCB is not yet available and the LUN
4669 * has been probed ok, try to allocate the LCB.
4671 if (!lp && sym_is_bit(tp->lun_map, ln)) {
4672 lp = sym_alloc_lcb(np, tn, ln);
4679 * If the LCB is not available here, then the
4680 * logical unit is not yet discovered. For those
4681 * ones only accept 1 SCSI IO per logical unit,
4682 * since we cannot allow disconnections.
4685 if (!sym_is_bit(tp->busy0_map, ln))
4686 sym_set_bit(tp->busy0_map, ln);
4691 * If we have been asked for a tagged command.
4695 * Debugging purpose.
4697 #ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
4698 assert(lp->busy_itl == 0);
4701 * Allocate resources for tags if not yet.
4704 sym_alloc_lcb_tags(np, tn, ln);
4709 * Get a tag for this SCSI IO and set up
4710 * the CCB bus address for reselection,
4711 * and count it for this LUN.
4712 * Toggle reselect path to tagged.
4714 if (lp->busy_itlq < SYM_CONF_MAX_TASK) {
4715 tag = lp->cb_tags[lp->ia_tag];
4716 if (++lp->ia_tag == SYM_CONF_MAX_TASK)
4719 #ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
4720 lp->itlq_tbl[tag] = cpu_to_scr(cp->ccb_ba);
4722 cpu_to_scr(SCRIPTA_BA(np, resel_tag));
4724 #ifdef SYM_OPT_LIMIT_COMMAND_REORDERING
4725 cp->tags_si = lp->tags_si;
4726 ++lp->tags_sum[cp->tags_si];
4734 * This command will not be tagged.
4735 * If we already have either a tagged or untagged
4736 * one, refuse to overlap this untagged one.
4740 * Debugging purpose.
4742 #ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
4743 assert(lp->busy_itl == 0 && lp->busy_itlq == 0);
4746 * Count this nexus for this LUN.
4747 * Set up the CCB bus address for reselection.
4748 * Toggle reselect path to untagged.
4751 #ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING
4752 if (lp->busy_itl == 1) {
4753 lp->head.itl_task_sa = cpu_to_scr(cp->ccb_ba);
4755 cpu_to_scr(SCRIPTA_BA(np, resel_no_tag));
4763 * Put the CCB into the busy queue.
4765 sym_insque_tail(&cp->link_ccbq, &np->busy_ccbq);
4766 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
4768 sym_remque(&cp->link2_ccbq);
4769 sym_insque_tail(&cp->link2_ccbq, &lp->waiting_ccbq);
4774 cp->odd_byte_adjustment = 0;
4776 cp->order = tag_order;
4780 if (DEBUG_FLAGS & DEBUG_TAGS) {
4781 sym_print_addr(cmd, "ccb @%p using tag %d.\n", cp, tag);
4787 sym_insque_head(&cp->link_ccbq, &np->free_ccbq);
4792 * Release one control block
4794 void sym_free_ccb (struct sym_hcb *np, struct sym_ccb *cp)
4796 struct sym_tcb *tp = &np->target[cp->target];
4797 struct sym_lcb *lp = sym_lp(tp, cp->lun);
4799 if (DEBUG_FLAGS & DEBUG_TAGS) {
4800 sym_print_addr(cp->cmd, "ccb @%p freeing tag %d.\n",
4809 * If tagged, release the tag, set the relect path
4811 if (cp->tag != NO_TAG) {
4812 #ifdef SYM_OPT_LIMIT_COMMAND_REORDERING
4813 --lp->tags_sum[cp->tags_si];
4816 * Free the tag value.
4818 lp->cb_tags[lp->if_tag] = cp->tag;
4819 if (++lp->if_tag == SYM_CONF_MAX_TASK)
4822 * Make the reselect path invalid,
4823 * and uncount this CCB.
4825 lp->itlq_tbl[cp->tag] = cpu_to_scr(np->bad_itlq_ba);
4827 } else { /* Untagged */
4829 * Make the reselect path invalid,
4830 * and uncount this CCB.
4832 lp->head.itl_task_sa = cpu_to_scr(np->bad_itl_ba);
4836 * If no JOB active, make the LUN reselect path invalid.
4838 if (lp->busy_itlq == 0 && lp->busy_itl == 0)
4840 cpu_to_scr(SCRIPTB_BA(np, resel_bad_lun));
4843 * Otherwise, we only accept 1 IO per LUN.
4844 * Clear the bit that keeps track of this IO.
4847 sym_clr_bit(tp->busy0_map, cp->lun);
4850 * We donnot queue more than 1 ccb per target
4851 * with negotiation at any time. If this ccb was
4852 * used for negotiation, clear this info in the tcb.
4854 if (cp == tp->nego_cp)
4857 #ifdef SYM_CONF_IARB_SUPPORT
4859 * If we just complete the last queued CCB,
4860 * clear this info that is no longer relevant.
4862 if (cp == np->last_cp)
4867 * Make this CCB available.
4870 cp->host_status = HS_IDLE;
4871 sym_remque(&cp->link_ccbq);
4872 sym_insque_head(&cp->link_ccbq, &np->free_ccbq);
4874 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
4876 sym_remque(&cp->link2_ccbq);
4877 sym_insque_tail(&cp->link2_ccbq, &np->dummy_ccbq);
4879 if (cp->tag != NO_TAG)
4882 --lp->started_no_tag;
4890 * Allocate a CCB from memory and initialize its fixed part.
4892 static struct sym_ccb *sym_alloc_ccb(struct sym_hcb *np)
4894 struct sym_ccb *cp = NULL;
4898 * Prevent from allocating more CCBs than we can
4899 * queue to the controller.
4901 if (np->actccbs >= SYM_CONF_MAX_START)
4905 * Allocate memory for this CCB.
4907 cp = sym_calloc_dma(sizeof(struct sym_ccb), "CCB");
4917 * Compute the bus address of this ccb.
4919 cp->ccb_ba = vtobus(cp);
4922 * Insert this ccb into the hashed list.
4924 hcode = CCB_HASH_CODE(cp->ccb_ba);
4925 cp->link_ccbh = np->ccbh[hcode];
4926 np->ccbh[hcode] = cp;
4929 * Initialyze the start and restart actions.
4931 cp->phys.head.go.start = cpu_to_scr(SCRIPTA_BA(np, idle));
4932 cp->phys.head.go.restart = cpu_to_scr(SCRIPTB_BA(np, bad_i_t_l));
4935 * Initilialyze some other fields.
4937 cp->phys.smsg_ext.addr = cpu_to_scr(HCB_BA(np, msgin[2]));
4940 * Chain into free ccb queue.
4942 sym_insque_head(&cp->link_ccbq, &np->free_ccbq);
4945 * Chain into optionnal lists.
4947 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
4948 sym_insque_head(&cp->link2_ccbq, &np->dummy_ccbq);
4953 sym_mfree_dma(cp, sizeof(*cp), "CCB");
4958 * Look up a CCB from a DSA value.
4960 static struct sym_ccb *sym_ccb_from_dsa(struct sym_hcb *np, u32 dsa)
4965 hcode = CCB_HASH_CODE(dsa);
4966 cp = np->ccbh[hcode];
4968 if (cp->ccb_ba == dsa)
4977 * Target control block initialisation.
4978 * Nothing important to do at the moment.
4980 static void sym_init_tcb (struct sym_hcb *np, u_char tn)
4982 #if 0 /* Hmmm... this checking looks paranoid. */
4984 * Check some alignments required by the chip.
4986 assert (((offsetof(struct sym_reg, nc_sxfer) ^
4987 offsetof(struct sym_tcb, head.sval)) &3) == 0);
4988 assert (((offsetof(struct sym_reg, nc_scntl3) ^
4989 offsetof(struct sym_tcb, head.wval)) &3) == 0);
4994 * Lun control block allocation and initialization.
4996 struct sym_lcb *sym_alloc_lcb (struct sym_hcb *np, u_char tn, u_char ln)
4998 struct sym_tcb *tp = &np->target[tn];
4999 struct sym_lcb *lp = sym_lp(tp, ln);
5002 * Already done, just return.
5008 * Donnot allow LUN control block
5009 * allocation for not probed LUNs.
5011 if (!sym_is_bit(tp->lun_map, ln))
5015 * Initialize the target control block if not yet.
5017 sym_init_tcb (np, tn);
5020 * Allocate the LCB bus address array.
5021 * Compute the bus address of this table.
5023 if (ln && !tp->luntbl) {
5026 tp->luntbl = sym_calloc_dma(256, "LUNTBL");
5029 for (i = 0 ; i < 64 ; i++)
5030 tp->luntbl[i] = cpu_to_scr(vtobus(&np->badlun_sa));
5031 tp->head.luntbl_sa = cpu_to_scr(vtobus(tp->luntbl));
5035 * Allocate the table of pointers for LUN(s) > 0, if needed.
5037 if (ln && !tp->lunmp) {
5038 tp->lunmp = kcalloc(SYM_CONF_MAX_LUN, sizeof(struct sym_lcb *),
5046 * Make it available to the chip.
5048 lp = sym_calloc_dma(sizeof(struct sym_lcb), "LCB");
5053 tp->luntbl[ln] = cpu_to_scr(vtobus(lp));
5057 tp->head.lun0_sa = cpu_to_scr(vtobus(lp));
5061 * Let the itl task point to error handling.
5063 lp->head.itl_task_sa = cpu_to_scr(np->bad_itl_ba);
5066 * Set the reselect pattern to our default. :)
5068 lp->head.resel_sa = cpu_to_scr(SCRIPTB_BA(np, resel_bad_lun));
5071 * Set user capabilities.
5073 lp->user_flags = tp->usrflags & (SYM_DISC_ENABLED | SYM_TAGS_ENABLED);
5075 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5077 * Initialize device queueing.
5079 sym_que_init(&lp->waiting_ccbq);
5080 sym_que_init(&lp->started_ccbq);
5081 lp->started_max = SYM_CONF_MAX_TASK;
5082 lp->started_limit = SYM_CONF_MAX_TASK;
5085 * If we are busy, count the IO.
5087 if (sym_is_bit(tp->busy0_map, ln)) {
5089 sym_clr_bit(tp->busy0_map, ln);
5096 * Allocate LCB resources for tagged command queuing.
5098 static void sym_alloc_lcb_tags (struct sym_hcb *np, u_char tn, u_char ln)
5100 struct sym_tcb *tp = &np->target[tn];
5101 struct sym_lcb *lp = sym_lp(tp, ln);
5105 * If LCB not available, try to allocate it.
5107 if (!lp && !(lp = sym_alloc_lcb(np, tn, ln)))
5111 * Allocate the task table and and the tag allocation
5112 * circular buffer. We want both or none.
5114 lp->itlq_tbl = sym_calloc_dma(SYM_CONF_MAX_TASK*4, "ITLQ_TBL");
5117 lp->cb_tags = kcalloc(SYM_CONF_MAX_TASK, 1, GFP_ATOMIC);
5119 sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, "ITLQ_TBL");
5120 lp->itlq_tbl = NULL;
5125 * Initialize the task table with invalid entries.
5127 for (i = 0 ; i < SYM_CONF_MAX_TASK ; i++)
5128 lp->itlq_tbl[i] = cpu_to_scr(np->notask_ba);
5131 * Fill up the tag buffer with tag numbers.
5133 for (i = 0 ; i < SYM_CONF_MAX_TASK ; i++)
5137 * Make the task table available to SCRIPTS,
5138 * And accept tagged commands now.
5140 lp->head.itlq_tbl_sa = cpu_to_scr(vtobus(lp->itlq_tbl));
5148 * Queue a SCSI IO to the controller.
5150 int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
5152 struct scsi_device *sdev = cmd->device;
5160 * Keep track of the IO in our CCB.
5165 * Retrieve the target descriptor.
5167 tp = &np->target[cp->target];
5170 * Retrieve the lun descriptor.
5172 lp = sym_lp(tp, sdev->lun);
5174 can_disconnect = (cp->tag != NO_TAG) ||
5175 (lp && (lp->curr_flags & SYM_DISC_ENABLED));
5177 msgptr = cp->scsi_smsg;
5179 msgptr[msglen++] = IDENTIFY(can_disconnect, sdev->lun);
5182 * Build the tag message if present.
5184 if (cp->tag != NO_TAG) {
5185 u_char order = cp->order;
5193 order = M_SIMPLE_TAG;
5195 #ifdef SYM_OPT_LIMIT_COMMAND_REORDERING
5197 * Avoid too much reordering of SCSI commands.
5198 * The algorithm tries to prevent completion of any
5199 * tagged command from being delayed against more
5200 * than 3 times the max number of queued commands.
5202 if (lp && lp->tags_since > 3*SYM_CONF_MAX_TAG) {
5203 lp->tags_si = !(lp->tags_si);
5204 if (lp->tags_sum[lp->tags_si]) {
5205 order = M_ORDERED_TAG;
5206 if ((DEBUG_FLAGS & DEBUG_TAGS)||sym_verbose>1) {
5208 "ordered tag forced.\n");
5214 msgptr[msglen++] = order;
5217 * For less than 128 tags, actual tags are numbered
5218 * 1,3,5,..2*MAXTAGS+1,since we may have to deal
5219 * with devices that have problems with #TAG 0 or too
5220 * great #TAG numbers. For more tags (up to 256),
5221 * we use directly our tag number.
5223 #if SYM_CONF_MAX_TASK > (512/4)
5224 msgptr[msglen++] = cp->tag;
5226 msgptr[msglen++] = (cp->tag << 1) + 1;
5231 * Build a negotiation message if needed.
5232 * (nego_status is filled by sym_prepare_nego())
5234 cp->nego_status = 0;
5235 if (tp->tgoal.check_nego && !tp->nego_cp && lp) {
5236 msglen += sym_prepare_nego(np, cp, msgptr + msglen);
5242 cp->phys.head.go.start = cpu_to_scr(SCRIPTA_BA(np, select));
5243 cp->phys.head.go.restart = cpu_to_scr(SCRIPTA_BA(np, resel_dsa));
5248 cp->phys.select.sel_id = cp->target;
5249 cp->phys.select.sel_scntl3 = tp->head.wval;
5250 cp->phys.select.sel_sxfer = tp->head.sval;
5251 cp->phys.select.sel_scntl4 = tp->head.uval;
5256 cp->phys.smsg.addr = CCB_BA(cp, scsi_smsg);
5257 cp->phys.smsg.size = cpu_to_scr(msglen);
5262 cp->host_xflags = 0;
5263 cp->host_status = cp->nego_status ? HS_NEGOTIATE : HS_BUSY;
5264 cp->ssss_status = S_ILLEGAL;
5265 cp->xerr_status = 0;
5267 cp->extra_bytes = 0;
5270 * extreme data pointer.
5271 * shall be positive, so -1 is lower than lowest.:)
5277 * Build the CDB and DATA descriptor block
5280 return sym_setup_data_and_start(np, cmd, cp);
5284 * Reset a SCSI target (all LUNs of this target).
5286 int sym_reset_scsi_target(struct sym_hcb *np, int target)
5290 if (target == np->myaddr || (u_int)target >= SYM_CONF_MAX_TARGET)
5293 tp = &np->target[target];
5296 np->istat_sem = SEM;
5297 OUTB(np, nc_istat, SIGP|SEM);
5305 static int sym_abort_ccb(struct sym_hcb *np, struct sym_ccb *cp, int timed_out)
5308 * Check that the IO is active.
5310 if (!cp || !cp->host_status || cp->host_status == HS_WAIT)
5314 * If a previous abort didn't succeed in time,
5315 * perform a BUS reset.
5318 sym_reset_scsi_bus(np, 1);
5323 * Mark the CCB for abort and allow time for.
5325 cp->to_abort = timed_out ? 2 : 1;
5328 * Tell the SCRIPTS processor to stop and synchronize with us.
5330 np->istat_sem = SEM;
5331 OUTB(np, nc_istat, SIGP|SEM);
5335 int sym_abort_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, int timed_out)
5341 * Look up our CCB control block.
5344 FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
5345 struct sym_ccb *cp2 = sym_que_entry(qp, struct sym_ccb, link_ccbq);
5346 if (cp2->cmd == cmd) {
5352 return sym_abort_ccb(np, cp, timed_out);
5356 * Complete execution of a SCSI command with extended
5357 * error, SCSI status error, or having been auto-sensed.
5359 * The SCRIPTS processor is not running there, so we
5360 * can safely access IO registers and remove JOBs from
5362 * SCRATCHA is assumed to have been loaded with STARTPOS
5363 * before the SCRIPTS called the C code.
5365 void sym_complete_error(struct sym_hcb *np, struct sym_ccb *cp)
5367 struct scsi_device *sdev;
5368 struct scsi_cmnd *cmd;
5375 * Paranoid check. :)
5377 if (!cp || !cp->cmd)
5382 if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_RESULT)) {
5383 dev_info(&sdev->sdev_gendev, "CCB=%p STAT=%x/%x/%x\n", cp,
5384 cp->host_status, cp->ssss_status, cp->host_flags);
5388 * Get target and lun pointers.
5390 tp = &np->target[cp->target];
5391 lp = sym_lp(tp, sdev->lun);
5394 * Check for extended errors.
5396 if (cp->xerr_status) {
5398 sym_print_xerr(cmd, cp->xerr_status);
5399 if (cp->host_status == HS_COMPLETE)
5400 cp->host_status = HS_COMP_ERR;
5404 * Calculate the residual.
5406 resid = sym_compute_residual(np, cp);
5408 if (!SYM_SETUP_RESIDUAL_SUPPORT) {/* If user does not want residuals */
5409 resid = 0; /* throw them away. :) */
5414 printf("XXXX RESID= %d - 0x%x\n", resid, resid);
5418 * Dequeue all queued CCBs for that device
5419 * not yet started by SCRIPTS.
5421 i = (INL(np, nc_scratcha) - np->squeue_ba) / 4;
5422 i = sym_dequeue_from_squeue(np, i, cp->target, sdev->lun, -1);
5425 * Restart the SCRIPTS processor.
5427 OUTL_DSP(np, SCRIPTA_BA(np, start));
5429 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5430 if (cp->host_status == HS_COMPLETE &&
5431 cp->ssss_status == S_QUEUE_FULL) {
5432 if (!lp || lp->started_tags - i < 2)
5435 * Decrease queue depth as needed.
5437 lp->started_max = lp->started_tags - i - 1;
5440 if (sym_verbose >= 2) {
5441 sym_print_addr(cmd, " queue depth is now %d\n",
5448 cp->host_status = HS_BUSY;
5449 cp->ssss_status = S_ILLEGAL;
5452 * Let's requeue it to device.
5454 sym_set_cam_status(cmd, DID_SOFT_ERROR);
5460 * Build result in CAM ccb.
5462 sym_set_cam_result_error(np, cp, resid);
5464 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5468 * Add this one to the COMP queue.
5470 sym_remque(&cp->link_ccbq);
5471 sym_insque_head(&cp->link_ccbq, &np->comp_ccbq);
5474 * Complete all those commands with either error
5475 * or requeue condition.
5477 sym_flush_comp_queue(np, 0);
5479 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5481 * Donnot start more than 1 command after an error.
5484 sym_start_next_ccbs(np, lp, 1);
5489 * Complete execution of a successful SCSI command.
5491 * Only successful commands go to the DONE queue,
5492 * since we need to have the SCRIPTS processor
5493 * stopped on any error condition.
5494 * The SCRIPTS processor is running while we are
5495 * completing successful commands.
5497 void sym_complete_ok (struct sym_hcb *np, struct sym_ccb *cp)
5501 struct scsi_cmnd *cmd;
5505 * Paranoid check. :)
5507 if (!cp || !cp->cmd)
5509 assert (cp->host_status == HS_COMPLETE);
5517 * Get target and lun pointers.
5519 tp = &np->target[cp->target];
5520 lp = sym_lp(tp, cp->lun);
5523 * Assume device discovered on first success.
5526 sym_set_bit(tp->lun_map, cp->lun);
5529 * If all data have been transferred, given than no
5530 * extended error did occur, there is no residual.
5533 if (cp->phys.head.lastp != sym_goalp(cp))
5534 resid = sym_compute_residual(np, cp);
5537 * Wrong transfer residuals may be worse than just always
5538 * returning zero. User can disable this feature in
5539 * sym53c8xx.h. Residual support is enabled by default.
5541 if (!SYM_SETUP_RESIDUAL_SUPPORT)
5545 printf("XXXX RESID= %d - 0x%x\n", resid, resid);
5549 * Build result in CAM ccb.
5551 sym_set_cam_result_ok(cp, cmd, resid);
5553 #ifdef SYM_OPT_SNIFF_INQUIRY
5555 * On standard INQUIRY response (EVPD and CmDt
5556 * not set), sniff out device capabilities.
5558 if (cp->cdb_buf[0] == INQUIRY && !(cp->cdb_buf[1] & 0x3))
5559 sym_sniff_inquiry(np, cmd, resid);
5562 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5564 * If max number of started ccbs had been reduced,
5565 * increase it if 200 good status received.
5567 if (lp && lp->started_max < lp->started_limit) {
5569 if (lp->num_sgood >= 200) {
5572 if (sym_verbose >= 2) {
5573 sym_print_addr(cmd, " queue depth is now %d\n",
5583 sym_free_ccb (np, cp);
5585 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5587 * Requeue a couple of awaiting scsi commands.
5589 if (lp && !sym_que_empty(&lp->waiting_ccbq))
5590 sym_start_next_ccbs(np, lp, 2);
5593 * Complete the command.
5595 sym_xpt_done(np, cmd);
5599 * Soft-attach the controller.
5601 int sym_hcb_attach(struct Scsi_Host *shost, struct sym_fw *fw, struct sym_nvram *nvram)
5603 struct sym_hcb *np = sym_get_hcb(shost);
5607 * Get some info about the firmware.
5609 np->scripta_sz = fw->a_size;
5610 np->scriptb_sz = fw->b_size;
5611 np->scriptz_sz = fw->z_size;
5612 np->fw_setup = fw->setup;
5613 np->fw_patch = fw->patch;
5614 np->fw_name = fw->name;
5617 * Save setting of some IO registers, so we will
5618 * be able to probe specific implementations.
5620 sym_save_initial_setting (np);
5623 * Reset the chip now, since it has been reported
5624 * that SCSI clock calibration may not work properly
5625 * if the chip is currently active.
5630 * Prepare controller and devices settings, according
5631 * to chip features, user set-up and driver set-up.
5633 sym_prepare_setting(shost, np, nvram);
5636 * Check the PCI clock frequency.
5637 * Must be performed after prepare_setting since it destroys
5638 * STEST1 that is used to probe for the clock doubler.
5640 i = sym_getpciclock(np);
5641 if (i > 37000 && !(np->features & FE_66MHZ))
5642 printf("%s: PCI BUS clock seems too high: %u KHz.\n",
5646 * Allocate the start queue.
5648 np->squeue = sym_calloc_dma(sizeof(u32)*(MAX_QUEUE*2),"SQUEUE");
5651 np->squeue_ba = vtobus(np->squeue);
5654 * Allocate the done queue.
5656 np->dqueue = sym_calloc_dma(sizeof(u32)*(MAX_QUEUE*2),"DQUEUE");
5659 np->dqueue_ba = vtobus(np->dqueue);
5662 * Allocate the target bus address array.
5664 np->targtbl = sym_calloc_dma(256, "TARGTBL");
5667 np->targtbl_ba = vtobus(np->targtbl);
5670 * Allocate SCRIPTS areas.
5672 np->scripta0 = sym_calloc_dma(np->scripta_sz, "SCRIPTA0");
5673 np->scriptb0 = sym_calloc_dma(np->scriptb_sz, "SCRIPTB0");
5674 np->scriptz0 = sym_calloc_dma(np->scriptz_sz, "SCRIPTZ0");
5675 if (!np->scripta0 || !np->scriptb0 || !np->scriptz0)
5679 * Allocate the array of lists of CCBs hashed by DSA.
5681 np->ccbh = kcalloc(sizeof(struct sym_ccb **), CCB_HASH_SIZE, GFP_KERNEL);
5686 * Initialyze the CCB free and busy queues.
5688 sym_que_init(&np->free_ccbq);
5689 sym_que_init(&np->busy_ccbq);
5690 sym_que_init(&np->comp_ccbq);
5693 * Initialization for optional handling
5694 * of device queueing.
5696 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
5697 sym_que_init(&np->dummy_ccbq);
5700 * Allocate some CCB. We need at least ONE.
5702 if (!sym_alloc_ccb(np))
5706 * Calculate BUS addresses where we are going
5707 * to load the SCRIPTS.
5709 np->scripta_ba = vtobus(np->scripta0);
5710 np->scriptb_ba = vtobus(np->scriptb0);
5711 np->scriptz_ba = vtobus(np->scriptz0);
5714 np->scripta_ba = np->ram_ba;
5715 if (np->features & FE_RAM8K) {
5717 np->scriptb_ba = np->scripta_ba + 4096;
5718 #if 0 /* May get useful for 64 BIT PCI addressing */
5719 np->scr_ram_seg = cpu_to_scr(np->scripta_ba >> 32);
5727 * Copy scripts to controller instance.
5729 memcpy(np->scripta0, fw->a_base, np->scripta_sz);
5730 memcpy(np->scriptb0, fw->b_base, np->scriptb_sz);
5731 memcpy(np->scriptz0, fw->z_base, np->scriptz_sz);
5734 * Setup variable parts in scripts and compute
5735 * scripts bus addresses used from the C code.
5737 np->fw_setup(np, fw);
5740 * Bind SCRIPTS with physical addresses usable by the
5741 * SCRIPTS processor (as seen from the BUS = BUS addresses).
5743 sym_fw_bind_script(np, (u32 *) np->scripta0, np->scripta_sz);
5744 sym_fw_bind_script(np, (u32 *) np->scriptb0, np->scriptb_sz);
5745 sym_fw_bind_script(np, (u32 *) np->scriptz0, np->scriptz_sz);
5747 #ifdef SYM_CONF_IARB_SUPPORT
5749 * If user wants IARB to be set when we win arbitration
5750 * and have other jobs, compute the max number of consecutive
5751 * settings of IARB hints before we leave devices a chance to
5752 * arbitrate for reselection.
5754 #ifdef SYM_SETUP_IARB_MAX
5755 np->iarb_max = SYM_SETUP_IARB_MAX;
5762 * Prepare the idle and invalid task actions.
5764 np->idletask.start = cpu_to_scr(SCRIPTA_BA(np, idle));
5765 np->idletask.restart = cpu_to_scr(SCRIPTB_BA(np, bad_i_t_l));
5766 np->idletask_ba = vtobus(&np->idletask);
5768 np->notask.start = cpu_to_scr(SCRIPTA_BA(np, idle));
5769 np->notask.restart = cpu_to_scr(SCRIPTB_BA(np, bad_i_t_l));
5770 np->notask_ba = vtobus(&np->notask);
5772 np->bad_itl.start = cpu_to_scr(SCRIPTA_BA(np, idle));
5773 np->bad_itl.restart = cpu_to_scr(SCRIPTB_BA(np, bad_i_t_l));
5774 np->bad_itl_ba = vtobus(&np->bad_itl);
5776 np->bad_itlq.start = cpu_to_scr(SCRIPTA_BA(np, idle));
5777 np->bad_itlq.restart = cpu_to_scr(SCRIPTB_BA(np,bad_i_t_l_q));
5778 np->bad_itlq_ba = vtobus(&np->bad_itlq);
5781 * Allocate and prepare the lun JUMP table that is used
5782 * for a target prior the probing of devices (bad lun table).
5783 * A private table will be allocated for the target on the
5784 * first INQUIRY response received.
5786 np->badluntbl = sym_calloc_dma(256, "BADLUNTBL");
5790 np->badlun_sa = cpu_to_scr(SCRIPTB_BA(np, resel_bad_lun));
5791 for (i = 0 ; i < 64 ; i++) /* 64 luns/target, no less */
5792 np->badluntbl[i] = cpu_to_scr(vtobus(&np->badlun_sa));
5795 * Prepare the bus address array that contains the bus
5796 * address of each target control block.
5797 * For now, assume all logical units are wrong. :)
5799 for (i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) {
5800 np->targtbl[i] = cpu_to_scr(vtobus(&np->target[i]));
5801 np->target[i].head.luntbl_sa =
5802 cpu_to_scr(vtobus(np->badluntbl));
5803 np->target[i].head.lun0_sa =
5804 cpu_to_scr(vtobus(&np->badlun_sa));
5808 * Now check the cache handling of the pci chipset.
5810 if (sym_snooptest (np)) {
5811 printf("%s: CACHE INCORRECTLY CONFIGURED.\n", sym_name(np));
5816 * Sigh! we are done.
5825 * Free everything that has been allocated for this device.
5827 void sym_hcb_free(struct sym_hcb *np)
5836 sym_mfree_dma(np->scriptz0, np->scriptz_sz, "SCRIPTZ0");
5838 sym_mfree_dma(np->scriptb0, np->scriptb_sz, "SCRIPTB0");
5840 sym_mfree_dma(np->scripta0, np->scripta_sz, "SCRIPTA0");
5842 sym_mfree_dma(np->squeue, sizeof(u32)*(MAX_QUEUE*2), "SQUEUE");
5844 sym_mfree_dma(np->dqueue, sizeof(u32)*(MAX_QUEUE*2), "DQUEUE");
5847 while ((qp = sym_remque_head(&np->free_ccbq)) != 0) {
5848 cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
5849 sym_mfree_dma(cp, sizeof(*cp), "CCB");
5855 sym_mfree_dma(np->badluntbl, 256,"BADLUNTBL");
5857 for (target = 0; target < SYM_CONF_MAX_TARGET ; target++) {
5858 tp = &np->target[target];
5859 for (lun = 0 ; lun < SYM_CONF_MAX_LUN ; lun++) {
5860 lp = sym_lp(tp, lun);
5864 sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4,
5867 sym_mfree_dma(lp, sizeof(*lp), "LCB");
5869 #if SYM_CONF_MAX_LUN > 1
5874 sym_mfree_dma(np->targtbl, 256, "TARGTBL");