2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2005 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
9 #include <linux/moduleparam.h>
10 #include <linux/vmalloc.h>
11 #include <linux/delay.h>
12 #include <linux/kthread.h>
14 #include <scsi/scsi_tcq.h>
15 #include <scsi/scsicam.h>
16 #include <scsi/scsi_transport.h>
17 #include <scsi/scsi_transport_fc.h>
22 char qla2x00_version_str[40];
25 * SRB allocation cache
27 static struct kmem_cache *srb_cachep;
30 * Ioctl related information.
34 int ql2xlogintimeout = 20;
35 module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
36 MODULE_PARM_DESC(ql2xlogintimeout,
37 "Login timeout value in seconds.");
39 int qlport_down_retry = 30;
40 module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR);
41 MODULE_PARM_DESC(qlport_down_retry,
42 "Maximum number of command retries to a port that returns "
43 "a PORT-DOWN status.");
45 int ql2xplogiabsentdevice;
46 module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR);
47 MODULE_PARM_DESC(ql2xplogiabsentdevice,
48 "Option to enable PLOGI to devices that are not present after "
49 "a Fabric scan. This is needed for several broken switches. "
50 "Default is 0 - no PLOGI. 1 - perfom PLOGI.");
52 int ql2xloginretrycount = 0;
53 module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
54 MODULE_PARM_DESC(ql2xloginretrycount,
55 "Specify an alternate value for the NVRAM login retry count.");
57 int ql2xallocfwdump = 1;
58 module_param(ql2xallocfwdump, int, S_IRUGO|S_IRUSR);
59 MODULE_PARM_DESC(ql2xallocfwdump,
60 "Option to enable allocation of memory for a firmware dump "
61 "during HBA initialization. Memory allocation requirements "
62 "vary by ISP type. Default is 1 - allocate memory.");
64 int ql2xextended_error_logging;
65 module_param(ql2xextended_error_logging, int, S_IRUGO|S_IRUSR);
66 MODULE_PARM_DESC(ql2xextended_error_logging,
67 "Option to enable extended error logging, "
68 "Default is 0 - no logging. 1 - log errors.");
70 static void qla2x00_free_device(scsi_qla_host_t *);
72 static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
75 module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
76 MODULE_PARM_DESC(ql2xfdmienable,
77 "Enables FDMI registratons "
78 "Default is 0 - no FDMI. 1 - perfom FDMI.");
80 #define MAX_Q_DEPTH 32
81 static int ql2xmaxqdepth = MAX_Q_DEPTH;
82 module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
83 MODULE_PARM_DESC(ql2xmaxqdepth,
84 "Maximum queue depth to report for target devices.");
86 int ql2xqfullrampup = 120;
87 module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR);
88 MODULE_PARM_DESC(ql2xqfullrampup,
89 "Number of seconds to wait to begin to ramp-up the queue "
90 "depth for a device after a queue-full condition has been "
91 "detected. Default is 120 seconds.");
94 * SCSI host template entry points
96 static int qla2xxx_slave_configure(struct scsi_device * device);
97 static int qla2xxx_slave_alloc(struct scsi_device *);
98 static int qla2xxx_scan_finished(struct Scsi_Host *, unsigned long time);
99 static void qla2xxx_scan_start(struct Scsi_Host *);
100 static void qla2xxx_slave_destroy(struct scsi_device *);
101 static int qla2x00_queuecommand(struct scsi_cmnd *cmd,
102 void (*fn)(struct scsi_cmnd *));
103 static int qla24xx_queuecommand(struct scsi_cmnd *cmd,
104 void (*fn)(struct scsi_cmnd *));
105 static int qla2xxx_eh_abort(struct scsi_cmnd *);
106 static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
107 static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
108 static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
109 static int qla2x00_loop_reset(scsi_qla_host_t *ha);
110 static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *);
112 static int qla2x00_change_queue_depth(struct scsi_device *, int);
113 static int qla2x00_change_queue_type(struct scsi_device *, int);
115 static struct scsi_host_template qla2x00_driver_template = {
116 .module = THIS_MODULE,
117 .name = QLA2XXX_DRIVER_NAME,
118 .queuecommand = qla2x00_queuecommand,
120 .eh_abort_handler = qla2xxx_eh_abort,
121 .eh_device_reset_handler = qla2xxx_eh_device_reset,
122 .eh_bus_reset_handler = qla2xxx_eh_bus_reset,
123 .eh_host_reset_handler = qla2xxx_eh_host_reset,
125 .slave_configure = qla2xxx_slave_configure,
127 .slave_alloc = qla2xxx_slave_alloc,
128 .slave_destroy = qla2xxx_slave_destroy,
129 .scan_finished = qla2xxx_scan_finished,
130 .scan_start = qla2xxx_scan_start,
131 .change_queue_depth = qla2x00_change_queue_depth,
132 .change_queue_type = qla2x00_change_queue_type,
135 .use_clustering = ENABLE_CLUSTERING,
136 .sg_tablesize = SG_ALL,
139 * The RISC allows for each command to transfer (2^32-1) bytes of data,
140 * which equates to 0x800000 sectors.
142 .max_sectors = 0xFFFF,
143 .shost_attrs = qla2x00_host_attrs,
146 static struct scsi_host_template qla24xx_driver_template = {
147 .module = THIS_MODULE,
148 .name = QLA2XXX_DRIVER_NAME,
149 .queuecommand = qla24xx_queuecommand,
151 .eh_abort_handler = qla2xxx_eh_abort,
152 .eh_device_reset_handler = qla2xxx_eh_device_reset,
153 .eh_bus_reset_handler = qla2xxx_eh_bus_reset,
154 .eh_host_reset_handler = qla2xxx_eh_host_reset,
156 .slave_configure = qla2xxx_slave_configure,
158 .slave_alloc = qla2xxx_slave_alloc,
159 .slave_destroy = qla2xxx_slave_destroy,
160 .change_queue_depth = qla2x00_change_queue_depth,
161 .change_queue_type = qla2x00_change_queue_type,
164 .use_clustering = ENABLE_CLUSTERING,
165 .sg_tablesize = SG_ALL,
167 .max_sectors = 0xFFFF,
168 .shost_attrs = qla2x00_host_attrs,
171 static struct scsi_transport_template *qla2xxx_transport_template = NULL;
173 /* TODO Convert to inlines
177 #define WATCH_INTERVAL 1 /* number of seconds */
179 static void qla2x00_timer(scsi_qla_host_t *);
181 static __inline__ void qla2x00_start_timer(scsi_qla_host_t *,
182 void *, unsigned long);
183 static __inline__ void qla2x00_restart_timer(scsi_qla_host_t *, unsigned long);
184 static __inline__ void qla2x00_stop_timer(scsi_qla_host_t *);
187 qla2x00_start_timer(scsi_qla_host_t *ha, void *func, unsigned long interval)
189 init_timer(&ha->timer);
190 ha->timer.expires = jiffies + interval * HZ;
191 ha->timer.data = (unsigned long)ha;
192 ha->timer.function = (void (*)(unsigned long))func;
193 add_timer(&ha->timer);
194 ha->timer_active = 1;
198 qla2x00_restart_timer(scsi_qla_host_t *ha, unsigned long interval)
200 mod_timer(&ha->timer, jiffies + interval * HZ);
203 static __inline__ void
204 qla2x00_stop_timer(scsi_qla_host_t *ha)
206 del_timer_sync(&ha->timer);
207 ha->timer_active = 0;
210 static int qla2x00_do_dpc(void *data);
212 static void qla2x00_rst_aen(scsi_qla_host_t *);
214 static uint8_t qla2x00_mem_alloc(scsi_qla_host_t *);
215 static void qla2x00_mem_free(scsi_qla_host_t *ha);
216 static int qla2x00_allocate_sp_pool( scsi_qla_host_t *ha);
217 static void qla2x00_free_sp_pool(scsi_qla_host_t *ha);
218 static void qla2x00_sp_free_dma(scsi_qla_host_t *, srb_t *);
219 void qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *);
221 /* -------------------------------------------------------------------------- */
224 qla2x00_pci_info_str(struct scsi_qla_host *ha, char *str)
226 static char *pci_bus_modes[] = {
227 "33", "66", "100", "133",
232 pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9;
235 strcat(str, pci_bus_modes[pci_bus]);
237 pci_bus = (ha->pci_attr & BIT_8) >> 8;
239 strcat(str, pci_bus_modes[pci_bus]);
241 strcat(str, " MHz)");
247 qla24xx_pci_info_str(struct scsi_qla_host *ha, char *str)
249 static char *pci_bus_modes[] = { "33", "66", "100", "133", };
253 pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
256 uint16_t pcie_lstat, lspeed, lwidth;
259 pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
260 lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
261 lwidth = (pcie_lstat &
262 (BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4;
264 strcpy(str, "PCIe (");
266 strcat(str, "2.5Gb/s ");
268 strcat(str, "<unknown> ");
269 snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
276 pci_bus = (ha->pci_attr & CSRX_PCIX_BUS_MODE_MASK) >> 8;
277 if (pci_bus == 0 || pci_bus == 8) {
279 strcat(str, pci_bus_modes[pci_bus >> 3]);
283 strcat(str, "Mode 2");
285 strcat(str, "Mode 1");
287 strcat(str, pci_bus_modes[pci_bus & ~BIT_2]);
289 strcat(str, " MHz)");
295 qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
299 sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
300 ha->fw_minor_version,
301 ha->fw_subminor_version);
303 if (ha->fw_attributes & BIT_9) {
308 switch (ha->fw_attributes & 0xFF) {
322 sprintf(un_str, "(%x)", ha->fw_attributes);
326 if (ha->fw_attributes & 0x100)
333 qla24xx_fw_version_str(struct scsi_qla_host *ha, char *str)
335 sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
336 ha->fw_minor_version,
337 ha->fw_subminor_version);
339 if (ha->fw_attributes & BIT_0)
340 strcat(str, "[Class 2] ");
341 if (ha->fw_attributes & BIT_1)
342 strcat(str, "[IP] ");
343 if (ha->fw_attributes & BIT_2)
344 strcat(str, "[Multi-ID] ");
345 if (ha->fw_attributes & BIT_13)
346 strcat(str, "[Experimental]");
350 static inline srb_t *
351 qla2x00_get_new_sp(scsi_qla_host_t *ha, fc_port_t *fcport,
352 struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
356 sp = mempool_alloc(ha->srb_mempool, GFP_ATOMIC);
364 CMD_SP(cmd) = (void *)sp;
365 cmd->scsi_done = done;
371 qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
373 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
374 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
375 struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
379 rval = fc_remote_port_chkready(rport);
382 goto qc_fail_command;
385 /* Close window on fcport/rport state-transitioning. */
386 if (!*(fc_port_t **)rport->dd_data) {
387 cmd->result = DID_IMM_RETRY << 16;
388 goto qc_fail_command;
391 if (atomic_read(&fcport->state) != FCS_ONLINE) {
392 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
393 atomic_read(&ha->loop_state) == LOOP_DEAD) {
394 cmd->result = DID_NO_CONNECT << 16;
395 goto qc_fail_command;
400 spin_unlock_irq(ha->host->host_lock);
402 sp = qla2x00_get_new_sp(ha, fcport, cmd, done);
404 goto qc_host_busy_lock;
406 rval = qla2x00_start_scsi(sp);
407 if (rval != QLA_SUCCESS)
408 goto qc_host_busy_free_sp;
410 spin_lock_irq(ha->host->host_lock);
414 qc_host_busy_free_sp:
415 qla2x00_sp_free_dma(ha, sp);
416 mempool_free(sp, ha->srb_mempool);
419 spin_lock_irq(ha->host->host_lock);
422 return SCSI_MLQUEUE_HOST_BUSY;
432 qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
434 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
435 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
436 struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
440 rval = fc_remote_port_chkready(rport);
443 goto qc24_fail_command;
446 /* Close window on fcport/rport state-transitioning. */
447 if (!*(fc_port_t **)rport->dd_data) {
448 cmd->result = DID_IMM_RETRY << 16;
449 goto qc24_fail_command;
452 if (atomic_read(&fcport->state) != FCS_ONLINE) {
453 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
454 atomic_read(&ha->loop_state) == LOOP_DEAD) {
455 cmd->result = DID_NO_CONNECT << 16;
456 goto qc24_fail_command;
461 spin_unlock_irq(ha->host->host_lock);
463 sp = qla2x00_get_new_sp(ha, fcport, cmd, done);
465 goto qc24_host_busy_lock;
467 rval = qla24xx_start_scsi(sp);
468 if (rval != QLA_SUCCESS)
469 goto qc24_host_busy_free_sp;
471 spin_lock_irq(ha->host->host_lock);
475 qc24_host_busy_free_sp:
476 qla2x00_sp_free_dma(ha, sp);
477 mempool_free(sp, ha->srb_mempool);
480 spin_lock_irq(ha->host->host_lock);
483 return SCSI_MLQUEUE_HOST_BUSY;
493 * qla2x00_eh_wait_on_command
494 * Waits for the command to be returned by the Firmware for some
498 * ha = actual ha whose done queue will contain the command
499 * returned by firmware.
500 * cmd = Scsi Command to wait on.
501 * flag = Abort/Reset(Bus or Device Reset)
508 qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd)
510 #define ABORT_POLLING_PERIOD 1000
511 #define ABORT_WAIT_ITER ((10 * 1000) / (ABORT_POLLING_PERIOD))
512 unsigned long wait_iter = ABORT_WAIT_ITER;
513 int ret = QLA_SUCCESS;
515 while (CMD_SP(cmd)) {
516 msleep(ABORT_POLLING_PERIOD);
522 ret = QLA_FUNCTION_FAILED;
528 * qla2x00_wait_for_hba_online
529 * Wait till the HBA is online after going through
530 * <= MAX_RETRIES_OF_ISP_ABORT or
531 * finally HBA is disabled ie marked offline
534 * ha - pointer to host adapter structure
537 * Does context switching-Release SPIN_LOCK
538 * (if any) before calling this routine.
541 * Success (Adapter is online) : 0
542 * Failed (Adapter is offline/disabled) : 1
545 qla2x00_wait_for_hba_online(scsi_qla_host_t *ha)
548 unsigned long wait_online;
550 wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ);
551 while (((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) ||
552 test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) ||
553 test_bit(ISP_ABORT_RETRY, &ha->dpc_flags) ||
554 ha->dpc_active) && time_before(jiffies, wait_online)) {
558 if (ha->flags.online)
559 return_status = QLA_SUCCESS;
561 return_status = QLA_FUNCTION_FAILED;
563 DEBUG2(printk("%s return_status=%d\n",__func__,return_status));
565 return (return_status);
569 * qla2x00_wait_for_loop_ready
570 * Wait for MAX_LOOP_TIMEOUT(5 min) value for loop
571 * to be in LOOP_READY state.
573 * ha - pointer to host adapter structure
576 * Does context switching-Release SPIN_LOCK
577 * (if any) before calling this routine.
581 * Success (LOOP_READY) : 0
582 * Failed (LOOP_NOT_READY) : 1
585 qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha)
587 int return_status = QLA_SUCCESS;
588 unsigned long loop_timeout ;
590 /* wait for 5 min at the max for loop to be ready */
591 loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ);
593 while ((!atomic_read(&ha->loop_down_timer) &&
594 atomic_read(&ha->loop_state) == LOOP_DOWN) ||
595 atomic_read(&ha->loop_state) != LOOP_READY) {
596 if (atomic_read(&ha->loop_state) == LOOP_DEAD) {
597 return_status = QLA_FUNCTION_FAILED;
601 if (time_after_eq(jiffies, loop_timeout)) {
602 return_status = QLA_FUNCTION_FAILED;
606 return (return_status);
610 qla2x00_block_error_handler(struct scsi_cmnd *cmnd)
612 struct Scsi_Host *shost = cmnd->device->host;
613 struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
616 spin_lock_irqsave(shost->host_lock, flags);
617 while (rport->port_state == FC_PORTSTATE_BLOCKED) {
618 spin_unlock_irqrestore(shost->host_lock, flags);
620 spin_lock_irqsave(shost->host_lock, flags);
622 spin_unlock_irqrestore(shost->host_lock, flags);
626 /**************************************************************************
630 * The abort function will abort the specified command.
633 * cmd = Linux SCSI command packet to be aborted.
636 * Either SUCCESS or FAILED.
639 * Only return FAILED if command not returned by firmware.
640 **************************************************************************/
642 qla2xxx_eh_abort(struct scsi_cmnd *cmd)
644 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
647 unsigned int id, lun;
648 unsigned long serial;
652 qla2x00_block_error_handler(cmd);
659 id = cmd->device->id;
660 lun = cmd->device->lun;
661 serial = cmd->serial_number;
663 /* Check active list for command command. */
664 spin_lock_irqsave(&ha->hardware_lock, flags);
665 for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
666 sp = ha->outstanding_cmds[i];
674 DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld.\n",
675 __func__, ha->host_no, sp, serial));
676 DEBUG3(qla2x00_print_scsi_cmd(cmd));
678 spin_unlock_irqrestore(&ha->hardware_lock, flags);
679 if (ha->isp_ops.abort_command(ha, sp)) {
680 DEBUG2(printk("%s(%ld): abort_command "
681 "mbx failed.\n", __func__, ha->host_no));
683 DEBUG3(printk("%s(%ld): abort_command "
684 "mbx success.\n", __func__, ha->host_no));
687 spin_lock_irqsave(&ha->hardware_lock, flags);
691 spin_unlock_irqrestore(&ha->hardware_lock, flags);
693 /* Wait for the command to be returned. */
695 if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
696 qla_printk(KERN_ERR, ha,
697 "scsi(%ld:%d:%d): Abort handler timed out -- %lx "
698 "%x.\n", ha->host_no, id, lun, serial, ret);
703 qla_printk(KERN_INFO, ha,
704 "scsi(%ld:%d:%d): Abort command issued -- %d %lx %x.\n",
705 ha->host_no, id, lun, wait, serial, ret);
710 /**************************************************************************
711 * qla2x00_eh_wait_for_pending_target_commands
714 * Waits for all the commands to come back from the specified target.
717 * ha - pointer to scsi_qla_host structure.
720 * Either SUCCESS or FAILED.
723 **************************************************************************/
725 qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
730 struct scsi_cmnd *cmd;
736 * Waiting for all commands for the designated target in the active
739 for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
740 spin_lock_irqsave(&ha->hardware_lock, flags);
741 sp = ha->outstanding_cmds[cnt];
744 spin_unlock_irqrestore(&ha->hardware_lock, flags);
745 if (cmd->device->id == t) {
746 if (!qla2x00_eh_wait_on_command(ha, cmd)) {
752 spin_unlock_irqrestore(&ha->hardware_lock, flags);
759 /**************************************************************************
760 * qla2xxx_eh_device_reset
763 * The device reset function will reset the target and abort any
764 * executing commands.
766 * NOTE: The use of SP is undefined within this context. Do *NOT*
767 * attempt to use this value, even if you determine it is
771 * cmd = Linux SCSI command packet of the command that cause the
775 * SUCCESS/FAILURE (defined as macro in scsi.h).
777 **************************************************************************/
779 qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
781 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
782 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
784 unsigned int id, lun;
785 unsigned long serial;
787 qla2x00_block_error_handler(cmd);
791 id = cmd->device->id;
792 lun = cmd->device->lun;
793 serial = cmd->serial_number;
798 qla_printk(KERN_INFO, ha,
799 "scsi(%ld:%d:%d): DEVICE RESET ISSUED.\n", ha->host_no, id, lun);
801 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
802 goto eh_dev_reset_done;
804 if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
805 if (qla2x00_device_reset(ha, fcport) == 0)
808 #if defined(LOGOUT_AFTER_DEVICE_RESET)
809 if (ret == SUCCESS) {
810 if (fcport->flags & FC_FABRIC_DEVICE) {
811 ha->isp_ops.fabric_logout(ha, fcport->loop_id);
812 qla2x00_mark_device_lost(ha, fcport, 0, 0);
817 DEBUG2(printk(KERN_INFO
818 "%s failed: loop not ready\n",__func__));
822 DEBUG3(printk("%s(%ld): device reset failed\n",
823 __func__, ha->host_no));
824 qla_printk(KERN_INFO, ha, "%s: device reset failed\n",
827 goto eh_dev_reset_done;
830 /* Flush outstanding commands. */
831 if (qla2x00_eh_wait_for_pending_target_commands(ha, id))
834 DEBUG3(printk("%s(%ld): failed while waiting for commands\n",
835 __func__, ha->host_no));
836 qla_printk(KERN_INFO, ha,
837 "%s: failed while waiting for commands\n", __func__);
839 qla_printk(KERN_INFO, ha,
840 "scsi(%ld:%d:%d): DEVICE RESET SUCCEEDED.\n", ha->host_no,
846 /**************************************************************************
847 * qla2x00_eh_wait_for_pending_commands
850 * Waits for all the commands to come back from the specified host.
853 * ha - pointer to scsi_qla_host structure.
860 **************************************************************************/
862 qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
867 struct scsi_cmnd *cmd;
873 * Waiting for all commands for the designated target in the active
876 for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
877 spin_lock_irqsave(&ha->hardware_lock, flags);
878 sp = ha->outstanding_cmds[cnt];
881 spin_unlock_irqrestore(&ha->hardware_lock, flags);
882 status = qla2x00_eh_wait_on_command(ha, cmd);
887 spin_unlock_irqrestore(&ha->hardware_lock, flags);
894 /**************************************************************************
895 * qla2xxx_eh_bus_reset
898 * The bus reset function will reset the bus and abort any executing
902 * cmd = Linux SCSI command packet of the command that cause the
906 * SUCCESS/FAILURE (defined as macro in scsi.h).
908 **************************************************************************/
910 qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
912 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
913 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
915 unsigned int id, lun;
916 unsigned long serial;
918 qla2x00_block_error_handler(cmd);
922 id = cmd->device->id;
923 lun = cmd->device->lun;
924 serial = cmd->serial_number;
929 qla_printk(KERN_INFO, ha,
930 "scsi(%ld:%d:%d): LOOP RESET ISSUED.\n", ha->host_no, id, lun);
932 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) {
933 DEBUG2(printk("%s failed:board disabled\n",__func__));
934 goto eh_bus_reset_done;
937 if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
938 if (qla2x00_loop_reset(ha) == QLA_SUCCESS)
942 goto eh_bus_reset_done;
944 /* Flush outstanding commands. */
945 if (!qla2x00_eh_wait_for_pending_commands(ha))
949 qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
950 (ret == FAILED) ? "failed" : "succeded");
955 /**************************************************************************
956 * qla2xxx_eh_host_reset
959 * The reset function will reset the Adapter.
962 * cmd = Linux SCSI command packet of the command that cause the
966 * Either SUCCESS or FAILED.
969 **************************************************************************/
971 qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
973 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
974 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
976 unsigned int id, lun;
977 unsigned long serial;
979 qla2x00_block_error_handler(cmd);
983 id = cmd->device->id;
984 lun = cmd->device->lun;
985 serial = cmd->serial_number;
990 qla_printk(KERN_INFO, ha,
991 "scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no, id, lun);
993 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
994 goto eh_host_reset_lock;
997 * Fixme-may be dpc thread is active and processing
998 * loop_resync,so wait a while for it to
999 * be completed and then issue big hammer.Otherwise
1000 * it may cause I/O failure as big hammer marks the
1001 * devices as lost kicking of the port_down_timer
1002 * while dpc is stuck for the mailbox to complete.
1004 qla2x00_wait_for_loop_ready(ha);
1005 set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
1006 if (qla2x00_abort_isp(ha)) {
1007 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
1008 /* failed. schedule dpc to try */
1009 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1011 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
1012 goto eh_host_reset_lock;
1014 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
1016 /* Waiting for our command in done_queue to be returned to OS.*/
1017 if (qla2x00_eh_wait_for_pending_commands(ha))
1021 qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
1022 (ret == FAILED) ? "failed" : "succeded");
1028 * qla2x00_loop_reset
1032 * ha = adapter block pointer.
1038 qla2x00_loop_reset(scsi_qla_host_t *ha)
1041 struct fc_port *fcport;
1043 if (ha->flags.enable_lip_full_login) {
1044 ret = qla2x00_full_login_lip(ha);
1045 if (ret != QLA_SUCCESS) {
1046 DEBUG2_3(printk("%s(%ld): bus_reset failed: "
1047 "full_login_lip=%d.\n", __func__, ha->host_no,
1050 atomic_set(&ha->loop_state, LOOP_DOWN);
1051 atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
1052 qla2x00_mark_all_devices_lost(ha, 0);
1053 qla2x00_wait_for_loop_ready(ha);
1056 if (ha->flags.enable_lip_reset) {
1057 ret = qla2x00_lip_reset(ha);
1058 if (ret != QLA_SUCCESS) {
1059 DEBUG2_3(printk("%s(%ld): bus_reset failed: "
1060 "lip_reset=%d.\n", __func__, ha->host_no, ret));
1062 qla2x00_wait_for_loop_ready(ha);
1065 if (ha->flags.enable_target_reset) {
1066 list_for_each_entry(fcport, &ha->fcports, list) {
1067 if (fcport->port_type != FCT_TARGET)
1070 ret = qla2x00_device_reset(ha, fcport);
1071 if (ret != QLA_SUCCESS) {
1072 DEBUG2_3(printk("%s(%ld): bus_reset failed: "
1073 "target_reset=%d d_id=%x.\n", __func__,
1074 ha->host_no, ret, fcport->d_id.b24));
1079 /* Issue marker command only when we are going to start the I/O */
1080 ha->marker_needed = 1;
1086 * qla2x00_device_reset
1087 * Issue bus device reset message to the target.
1090 * ha = adapter block pointer.
1092 * TARGET_QUEUE_LOCK must be released.
1093 * ADAPTER_STATE_LOCK must be released.
1099 qla2x00_device_reset(scsi_qla_host_t *ha, fc_port_t *reset_fcport)
1101 /* Abort Target command will clear Reservation */
1102 return ha->isp_ops.abort_target(reset_fcport);
1106 qla2xxx_slave_alloc(struct scsi_device *sdev)
1108 struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
1110 if (!rport || fc_remote_port_chkready(rport))
1113 sdev->hostdata = *(fc_port_t **)rport->dd_data;
1119 qla2xxx_slave_configure(struct scsi_device *sdev)
1121 scsi_qla_host_t *ha = to_qla_host(sdev->host);
1122 struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
1124 if (sdev->tagged_supported)
1125 scsi_activate_tcq(sdev, ha->max_q_depth);
1127 scsi_deactivate_tcq(sdev, ha->max_q_depth);
1129 rport->dev_loss_tmo = ha->port_down_retry_count + 5;
1135 qla2xxx_slave_destroy(struct scsi_device *sdev)
1137 sdev->hostdata = NULL;
1141 qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth)
1143 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
1144 return sdev->queue_depth;
1148 qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
1150 if (sdev->tagged_supported) {
1151 scsi_set_tag_type(sdev, tag_type);
1153 scsi_activate_tcq(sdev, sdev->queue_depth);
1155 scsi_deactivate_tcq(sdev, sdev->queue_depth);
1163 * qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
1166 * At exit, the @ha's flags.enable_64bit_addressing set to indicated
1167 * supported addressing method.
1170 qla2x00_config_dma_addressing(scsi_qla_host_t *ha)
1172 /* Assume a 32bit DMA mask. */
1173 ha->flags.enable_64bit_addressing = 0;
1175 if (!dma_set_mask(&ha->pdev->dev, DMA_64BIT_MASK)) {
1176 /* Any upper-dword bits set? */
1177 if (MSD(dma_get_required_mask(&ha->pdev->dev)) &&
1178 !pci_set_consistent_dma_mask(ha->pdev, DMA_64BIT_MASK)) {
1179 /* Ok, a 64bit DMA mask is applicable. */
1180 ha->flags.enable_64bit_addressing = 1;
1181 ha->isp_ops.calc_req_entries = qla2x00_calc_iocbs_64;
1182 ha->isp_ops.build_iocbs = qla2x00_build_scsi_iocbs_64;
1187 dma_set_mask(&ha->pdev->dev, DMA_32BIT_MASK);
1188 pci_set_consistent_dma_mask(ha->pdev, DMA_32BIT_MASK);
1192 qla2x00_set_isp_flags(scsi_qla_host_t *ha)
1194 ha->device_type = DT_EXTENDED_IDS;
1195 switch (ha->pdev->device) {
1196 case PCI_DEVICE_ID_QLOGIC_ISP2100:
1197 ha->device_type |= DT_ISP2100;
1198 ha->device_type &= ~DT_EXTENDED_IDS;
1199 ha->fw_srisc_address = RISC_START_ADDRESS_2100;
1201 case PCI_DEVICE_ID_QLOGIC_ISP2200:
1202 ha->device_type |= DT_ISP2200;
1203 ha->device_type &= ~DT_EXTENDED_IDS;
1204 ha->fw_srisc_address = RISC_START_ADDRESS_2100;
1206 case PCI_DEVICE_ID_QLOGIC_ISP2300:
1207 ha->device_type |= DT_ISP2300;
1208 ha->device_type |= DT_ZIO_SUPPORTED;
1209 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1211 case PCI_DEVICE_ID_QLOGIC_ISP2312:
1212 ha->device_type |= DT_ISP2312;
1213 ha->device_type |= DT_ZIO_SUPPORTED;
1214 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1216 case PCI_DEVICE_ID_QLOGIC_ISP2322:
1217 ha->device_type |= DT_ISP2322;
1218 ha->device_type |= DT_ZIO_SUPPORTED;
1219 if (ha->pdev->subsystem_vendor == 0x1028 &&
1220 ha->pdev->subsystem_device == 0x0170)
1221 ha->device_type |= DT_OEM_001;
1222 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1224 case PCI_DEVICE_ID_QLOGIC_ISP6312:
1225 ha->device_type |= DT_ISP6312;
1226 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1228 case PCI_DEVICE_ID_QLOGIC_ISP6322:
1229 ha->device_type |= DT_ISP6322;
1230 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1232 case PCI_DEVICE_ID_QLOGIC_ISP2422:
1233 ha->device_type |= DT_ISP2422;
1234 ha->device_type |= DT_ZIO_SUPPORTED;
1235 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1237 case PCI_DEVICE_ID_QLOGIC_ISP2432:
1238 ha->device_type |= DT_ISP2432;
1239 ha->device_type |= DT_ZIO_SUPPORTED;
1240 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1242 case PCI_DEVICE_ID_QLOGIC_ISP5422:
1243 ha->device_type |= DT_ISP5422;
1244 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1246 case PCI_DEVICE_ID_QLOGIC_ISP5432:
1247 ha->device_type |= DT_ISP5432;
1248 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1254 qla2x00_iospace_config(scsi_qla_host_t *ha)
1256 unsigned long pio, pio_len, pio_flags;
1257 unsigned long mmio, mmio_len, mmio_flags;
1259 /* We only need PIO for Flash operations on ISP2312 v2 chips. */
1260 pio = pci_resource_start(ha->pdev, 0);
1261 pio_len = pci_resource_len(ha->pdev, 0);
1262 pio_flags = pci_resource_flags(ha->pdev, 0);
1263 if (pio_flags & IORESOURCE_IO) {
1264 if (pio_len < MIN_IOBASE_LEN) {
1265 qla_printk(KERN_WARNING, ha,
1266 "Invalid PCI I/O region size (%s)...\n",
1267 pci_name(ha->pdev));
1271 qla_printk(KERN_WARNING, ha,
1272 "region #0 not a PIO resource (%s)...\n",
1273 pci_name(ha->pdev));
1277 /* Use MMIO operations for all accesses. */
1278 mmio = pci_resource_start(ha->pdev, 1);
1279 mmio_len = pci_resource_len(ha->pdev, 1);
1280 mmio_flags = pci_resource_flags(ha->pdev, 1);
1282 if (!(mmio_flags & IORESOURCE_MEM)) {
1283 qla_printk(KERN_ERR, ha,
1284 "region #0 not an MMIO resource (%s), aborting\n",
1285 pci_name(ha->pdev));
1286 goto iospace_error_exit;
1288 if (mmio_len < MIN_IOBASE_LEN) {
1289 qla_printk(KERN_ERR, ha,
1290 "Invalid PCI mem region size (%s), aborting\n",
1291 pci_name(ha->pdev));
1292 goto iospace_error_exit;
1295 if (pci_request_regions(ha->pdev, QLA2XXX_DRIVER_NAME)) {
1296 qla_printk(KERN_WARNING, ha,
1297 "Failed to reserve PIO/MMIO regions (%s)\n",
1298 pci_name(ha->pdev));
1300 goto iospace_error_exit;
1303 ha->pio_address = pio;
1304 ha->pio_length = pio_len;
1305 ha->iobase = ioremap(mmio, MIN_IOBASE_LEN);
1307 qla_printk(KERN_ERR, ha,
1308 "cannot remap MMIO (%s), aborting\n", pci_name(ha->pdev));
1310 goto iospace_error_exit;
1320 qla2x00_enable_intrs(scsi_qla_host_t *ha)
1322 unsigned long flags = 0;
1323 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1325 spin_lock_irqsave(&ha->hardware_lock, flags);
1326 ha->interrupts_on = 1;
1327 /* enable risc and host interrupts */
1328 WRT_REG_WORD(®->ictrl, ICR_EN_INT | ICR_EN_RISC);
1329 RD_REG_WORD(®->ictrl);
1330 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1335 qla2x00_disable_intrs(scsi_qla_host_t *ha)
1337 unsigned long flags = 0;
1338 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1340 spin_lock_irqsave(&ha->hardware_lock, flags);
1341 ha->interrupts_on = 0;
1342 /* disable risc and host interrupts */
1343 WRT_REG_WORD(®->ictrl, 0);
1344 RD_REG_WORD(®->ictrl);
1345 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1349 qla24xx_enable_intrs(scsi_qla_host_t *ha)
1351 unsigned long flags = 0;
1352 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1354 spin_lock_irqsave(&ha->hardware_lock, flags);
1355 ha->interrupts_on = 1;
1356 WRT_REG_DWORD(®->ictrl, ICRX_EN_RISC_INT);
1357 RD_REG_DWORD(®->ictrl);
1358 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1362 qla24xx_disable_intrs(scsi_qla_host_t *ha)
1364 unsigned long flags = 0;
1365 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1367 spin_lock_irqsave(&ha->hardware_lock, flags);
1368 ha->interrupts_on = 0;
1369 WRT_REG_DWORD(®->ictrl, 0);
1370 RD_REG_DWORD(®->ictrl);
1371 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1375 qla2xxx_scan_start(struct Scsi_Host *shost)
1377 scsi_qla_host_t *ha = (scsi_qla_host_t *)shost->hostdata;
1379 set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
1380 set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
1381 set_bit(RSCN_UPDATE, &ha->dpc_flags);
1385 qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time)
1387 scsi_qla_host_t *ha = (scsi_qla_host_t *)shost->hostdata;
1391 if (time > ha->loop_reset_delay * HZ)
1394 return atomic_read(&ha->loop_state) == LOOP_READY;
1398 * PCI driver interface
1400 static int __devinit
1401 qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
1404 device_reg_t __iomem *reg;
1405 struct Scsi_Host *host;
1406 scsi_qla_host_t *ha;
1407 unsigned long flags = 0;
1410 struct scsi_host_template *sht;
1412 if (pci_enable_device(pdev))
1415 sht = &qla2x00_driver_template;
1416 if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
1417 pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 ||
1418 pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 ||
1419 pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432)
1420 sht = &qla24xx_driver_template;
1421 host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
1424 "qla2xxx: Couldn't allocate host from scsi layer!\n");
1425 goto probe_disable_device;
1428 /* Clear our data area */
1429 ha = (scsi_qla_host_t *)host->hostdata;
1430 memset(ha, 0, sizeof(scsi_qla_host_t));
1434 ha->host_no = host->host_no;
1435 sprintf(ha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, ha->host_no);
1437 /* Set ISP-type information. */
1438 qla2x00_set_isp_flags(ha);
1440 /* Configure PCI I/O space */
1441 ret = qla2x00_iospace_config(ha);
1445 qla_printk(KERN_INFO, ha,
1446 "Found an ISP%04X, irq %d, iobase 0x%p\n", pdev->device, pdev->irq,
1449 spin_lock_init(&ha->hardware_lock);
1451 ha->prev_topology = 0;
1452 ha->init_cb_size = sizeof(init_cb_t);
1453 ha->mgmt_svr_loop_id = MANAGEMENT_SERVER;
1454 ha->link_data_rate = PORT_SPEED_UNKNOWN;
1455 ha->optrom_size = OPTROM_SIZE_2300;
1457 ha->max_q_depth = MAX_Q_DEPTH;
1458 if (ql2xmaxqdepth != 0 && ql2xmaxqdepth <= 0xffffU)
1459 ha->max_q_depth = ql2xmaxqdepth;
1461 /* Assign ISP specific operations. */
1462 ha->isp_ops.pci_config = qla2100_pci_config;
1463 ha->isp_ops.reset_chip = qla2x00_reset_chip;
1464 ha->isp_ops.chip_diag = qla2x00_chip_diag;
1465 ha->isp_ops.config_rings = qla2x00_config_rings;
1466 ha->isp_ops.reset_adapter = qla2x00_reset_adapter;
1467 ha->isp_ops.nvram_config = qla2x00_nvram_config;
1468 ha->isp_ops.update_fw_options = qla2x00_update_fw_options;
1469 ha->isp_ops.load_risc = qla2x00_load_risc;
1470 ha->isp_ops.pci_info_str = qla2x00_pci_info_str;
1471 ha->isp_ops.fw_version_str = qla2x00_fw_version_str;
1472 ha->isp_ops.intr_handler = qla2100_intr_handler;
1473 ha->isp_ops.enable_intrs = qla2x00_enable_intrs;
1474 ha->isp_ops.disable_intrs = qla2x00_disable_intrs;
1475 ha->isp_ops.abort_command = qla2x00_abort_command;
1476 ha->isp_ops.abort_target = qla2x00_abort_target;
1477 ha->isp_ops.fabric_login = qla2x00_login_fabric;
1478 ha->isp_ops.fabric_logout = qla2x00_fabric_logout;
1479 ha->isp_ops.calc_req_entries = qla2x00_calc_iocbs_32;
1480 ha->isp_ops.build_iocbs = qla2x00_build_scsi_iocbs_32;
1481 ha->isp_ops.prep_ms_iocb = qla2x00_prep_ms_iocb;
1482 ha->isp_ops.prep_ms_fdmi_iocb = qla2x00_prep_ms_fdmi_iocb;
1483 ha->isp_ops.read_nvram = qla2x00_read_nvram_data;
1484 ha->isp_ops.write_nvram = qla2x00_write_nvram_data;
1485 ha->isp_ops.fw_dump = qla2100_fw_dump;
1486 ha->isp_ops.read_optrom = qla2x00_read_optrom_data;
1487 ha->isp_ops.write_optrom = qla2x00_write_optrom_data;
1488 if (IS_QLA2100(ha)) {
1489 host->max_id = MAX_TARGETS_2100;
1490 ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
1491 ha->request_q_length = REQUEST_ENTRY_CNT_2100;
1492 ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
1493 ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
1494 host->sg_tablesize = 32;
1495 ha->gid_list_info_size = 4;
1496 } else if (IS_QLA2200(ha)) {
1497 host->max_id = MAX_TARGETS_2200;
1498 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1499 ha->request_q_length = REQUEST_ENTRY_CNT_2200;
1500 ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
1501 ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
1502 ha->gid_list_info_size = 4;
1503 } else if (IS_QLA23XX(ha)) {
1504 host->max_id = MAX_TARGETS_2200;
1505 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1506 ha->request_q_length = REQUEST_ENTRY_CNT_2200;
1507 ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
1508 ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
1509 ha->isp_ops.pci_config = qla2300_pci_config;
1510 ha->isp_ops.intr_handler = qla2300_intr_handler;
1511 ha->isp_ops.fw_dump = qla2300_fw_dump;
1512 ha->isp_ops.beacon_on = qla2x00_beacon_on;
1513 ha->isp_ops.beacon_off = qla2x00_beacon_off;
1514 ha->isp_ops.beacon_blink = qla2x00_beacon_blink;
1515 ha->gid_list_info_size = 6;
1516 if (IS_QLA2322(ha) || IS_QLA6322(ha))
1517 ha->optrom_size = OPTROM_SIZE_2322;
1518 } else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
1519 host->max_id = MAX_TARGETS_2200;
1520 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1521 ha->request_q_length = REQUEST_ENTRY_CNT_24XX;
1522 ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
1523 ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
1524 ha->init_cb_size = sizeof(struct init_cb_24xx);
1525 ha->mgmt_svr_loop_id = 10;
1526 ha->isp_ops.pci_config = qla24xx_pci_config;
1527 ha->isp_ops.reset_chip = qla24xx_reset_chip;
1528 ha->isp_ops.chip_diag = qla24xx_chip_diag;
1529 ha->isp_ops.config_rings = qla24xx_config_rings;
1530 ha->isp_ops.reset_adapter = qla24xx_reset_adapter;
1531 ha->isp_ops.nvram_config = qla24xx_nvram_config;
1532 ha->isp_ops.update_fw_options = qla24xx_update_fw_options;
1533 ha->isp_ops.load_risc = qla24xx_load_risc;
1534 ha->isp_ops.pci_info_str = qla24xx_pci_info_str;
1535 ha->isp_ops.fw_version_str = qla24xx_fw_version_str;
1536 ha->isp_ops.intr_handler = qla24xx_intr_handler;
1537 ha->isp_ops.enable_intrs = qla24xx_enable_intrs;
1538 ha->isp_ops.disable_intrs = qla24xx_disable_intrs;
1539 ha->isp_ops.abort_command = qla24xx_abort_command;
1540 ha->isp_ops.abort_target = qla24xx_abort_target;
1541 ha->isp_ops.fabric_login = qla24xx_login_fabric;
1542 ha->isp_ops.fabric_logout = qla24xx_fabric_logout;
1543 ha->isp_ops.prep_ms_iocb = qla24xx_prep_ms_iocb;
1544 ha->isp_ops.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb;
1545 ha->isp_ops.read_nvram = qla24xx_read_nvram_data;
1546 ha->isp_ops.write_nvram = qla24xx_write_nvram_data;
1547 ha->isp_ops.fw_dump = qla24xx_fw_dump;
1548 ha->isp_ops.read_optrom = qla24xx_read_optrom_data;
1549 ha->isp_ops.write_optrom = qla24xx_write_optrom_data;
1550 ha->isp_ops.beacon_on = qla24xx_beacon_on;
1551 ha->isp_ops.beacon_off = qla24xx_beacon_off;
1552 ha->isp_ops.beacon_blink = qla24xx_beacon_blink;
1553 ha->gid_list_info_size = 8;
1554 ha->optrom_size = OPTROM_SIZE_24XX;
1556 host->can_queue = ha->request_q_length + 128;
1558 /* load the F/W, read paramaters, and init the H/W */
1559 ha->instance = num_hosts;
1561 init_MUTEX(&ha->mbx_cmd_sem);
1562 init_MUTEX_LOCKED(&ha->mbx_intr_sem);
1564 INIT_LIST_HEAD(&ha->list);
1565 INIT_LIST_HEAD(&ha->fcports);
1568 * These locks are used to prevent more than one CPU
1569 * from modifying the queue at the same time. The
1570 * higher level "host_lock" will reduce most
1571 * contention for these locks.
1573 spin_lock_init(&ha->mbx_reg_lock);
1575 qla2x00_config_dma_addressing(ha);
1576 if (qla2x00_mem_alloc(ha)) {
1577 qla_printk(KERN_WARNING, ha,
1578 "[ERROR] Failed to allocate memory for adapter\n");
1584 if (qla2x00_initialize_adapter(ha) &&
1585 !(ha->device_flags & DFLG_NO_CABLE)) {
1587 qla_printk(KERN_WARNING, ha,
1588 "Failed to initialize adapter\n");
1590 DEBUG2(printk("scsi(%ld): Failed to initialize adapter - "
1591 "Adapter flags %x.\n",
1592 ha->host_no, ha->device_flags));
1599 * Startup the kernel thread for this host adapter
1601 ha->dpc_thread = kthread_create(qla2x00_do_dpc, ha,
1602 "%s_dpc", ha->host_str);
1603 if (IS_ERR(ha->dpc_thread)) {
1604 qla_printk(KERN_WARNING, ha,
1605 "Unable to start DPC thread!\n");
1606 ret = PTR_ERR(ha->dpc_thread);
1610 host->this_id = 255;
1611 host->cmd_per_lun = 3;
1612 host->unique_id = ha->instance;
1613 host->max_cmd_len = MAX_CMDSZ;
1614 host->max_channel = MAX_BUSES - 1;
1615 host->max_lun = MAX_LUNS;
1616 host->transportt = qla2xxx_transport_template;
1618 ret = request_irq(pdev->irq, ha->isp_ops.intr_handler,
1619 IRQF_DISABLED|IRQF_SHARED, QLA2XXX_DRIVER_NAME, ha);
1621 qla_printk(KERN_WARNING, ha,
1622 "Failed to reserve interrupt %d already in use.\n",
1626 host->irq = pdev->irq;
1628 /* Initialized the timer */
1629 qla2x00_start_timer(ha, qla2x00_timer, WATCH_INTERVAL);
1631 DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n",
1634 ha->isp_ops.disable_intrs(ha);
1636 spin_lock_irqsave(&ha->hardware_lock, flags);
1638 if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
1639 WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_HOST_INT);
1640 WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_RISC_INT);
1642 WRT_REG_WORD(®->isp.semaphore, 0);
1643 WRT_REG_WORD(®->isp.hccr, HCCR_CLR_RISC_INT);
1644 WRT_REG_WORD(®->isp.hccr, HCCR_CLR_HOST_INT);
1646 /* Enable proper parity */
1647 if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) {
1650 WRT_REG_WORD(®->isp.hccr,
1651 (HCCR_ENABLE_PARITY + 0x1));
1653 /* SRAM, Instruction RAM and GP RAM parity */
1654 WRT_REG_WORD(®->isp.hccr,
1655 (HCCR_ENABLE_PARITY + 0x7));
1658 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1660 ha->isp_ops.enable_intrs(ha);
1662 pci_set_drvdata(pdev, ha);
1664 ha->flags.init_done = 1;
1665 ha->flags.online = 1;
1669 ret = scsi_add_host(host, &pdev->dev);
1673 scsi_scan_host(host);
1675 qla2x00_alloc_sysfs_attr(ha);
1677 qla2x00_init_host_attr(ha);
1679 qla_printk(KERN_INFO, ha, "\n"
1680 " QLogic Fibre Channel HBA Driver: %s\n"
1682 " ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n",
1683 qla2x00_version_str, ha->model_number,
1684 ha->model_desc ? ha->model_desc: "", pdev->device,
1685 ha->isp_ops.pci_info_str(ha, pci_info), pci_name(pdev),
1686 ha->flags.enable_64bit_addressing ? '+': '-', ha->host_no,
1687 ha->isp_ops.fw_version_str(ha, fw_str));
1692 qla2x00_free_device(ha);
1694 scsi_host_put(host);
1696 probe_disable_device:
1697 pci_disable_device(pdev);
1703 static void __devexit
1704 qla2x00_remove_one(struct pci_dev *pdev)
1706 scsi_qla_host_t *ha;
1708 ha = pci_get_drvdata(pdev);
1710 qla2x00_free_sysfs_attr(ha);
1712 fc_remove_host(ha->host);
1714 scsi_remove_host(ha->host);
1716 qla2x00_free_device(ha);
1718 scsi_host_put(ha->host);
1720 pci_set_drvdata(pdev, NULL);
1724 qla2x00_free_device(scsi_qla_host_t *ha)
1727 if (ha->timer_active)
1728 qla2x00_stop_timer(ha);
1730 /* Kill the kernel thread for this host */
1731 if (ha->dpc_thread) {
1732 struct task_struct *t = ha->dpc_thread;
1735 * qla2xxx_wake_dpc checks for ->dpc_thread
1736 * so we need to zero it out.
1738 ha->dpc_thread = NULL;
1743 qla2x00_trace_control(ha, TC_DISABLE, 0, 0);
1745 ha->flags.online = 0;
1747 /* Stop currently executing firmware. */
1748 qla2x00_try_to_stop_firmware(ha);
1750 /* turn-off interrupts on the card */
1751 if (ha->interrupts_on)
1752 ha->isp_ops.disable_intrs(ha);
1754 qla2x00_mem_free(ha);
1756 /* Detach interrupts */
1758 free_irq(ha->host->irq, ha);
1760 /* release io space registers */
1762 iounmap(ha->iobase);
1763 pci_release_regions(ha->pdev);
1765 pci_disable_device(ha->pdev);
1769 qla2x00_schedule_rport_del(struct scsi_qla_host *ha, fc_port_t *fcport,
1772 unsigned long flags;
1773 struct fc_rport *rport;
1778 rport = fcport->rport;
1780 spin_lock_irqsave(&fcport->rport_lock, flags);
1781 fcport->drport = rport;
1782 fcport->rport = NULL;
1783 *(fc_port_t **)rport->dd_data = NULL;
1784 spin_unlock_irqrestore(&fcport->rport_lock, flags);
1785 set_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags);
1787 spin_lock_irqsave(&fcport->rport_lock, flags);
1788 fcport->rport = NULL;
1789 *(fc_port_t **)rport->dd_data = NULL;
1790 spin_unlock_irqrestore(&fcport->rport_lock, flags);
1791 fc_remote_port_delete(rport);
1796 * qla2x00_mark_device_lost Updates fcport state when device goes offline.
1798 * Input: ha = adapter block pointer. fcport = port structure pointer.
1804 void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport,
1805 int do_login, int defer)
1807 if (atomic_read(&fcport->state) == FCS_ONLINE)
1808 qla2x00_schedule_rport_del(ha, fcport, defer);
1811 * We may need to retry the login, so don't change the state of the
1812 * port but do the retries.
1814 if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD)
1815 atomic_set(&fcport->state, FCS_DEVICE_LOST);
1820 if (fcport->login_retry == 0) {
1821 fcport->login_retry = ha->login_retry_count;
1822 set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
1824 DEBUG(printk("scsi(%ld): Port login retry: "
1825 "%02x%02x%02x%02x%02x%02x%02x%02x, "
1826 "id = 0x%04x retry cnt=%d\n",
1828 fcport->port_name[0],
1829 fcport->port_name[1],
1830 fcport->port_name[2],
1831 fcport->port_name[3],
1832 fcport->port_name[4],
1833 fcport->port_name[5],
1834 fcport->port_name[6],
1835 fcport->port_name[7],
1837 fcport->login_retry));
1842 * qla2x00_mark_all_devices_lost
1843 * Updates fcport state when device goes offline.
1846 * ha = adapter block pointer.
1847 * fcport = port structure pointer.
1855 qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer)
1859 list_for_each_entry(fcport, &ha->fcports, list) {
1860 if (fcport->port_type != FCT_TARGET)
1864 * No point in marking the device as lost, if the device is
1867 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
1869 if (atomic_read(&fcport->state) == FCS_ONLINE)
1870 qla2x00_schedule_rport_del(ha, fcport, defer);
1871 atomic_set(&fcport->state, FCS_DEVICE_LOST);
1875 qla2xxx_wake_dpc(ha);
1880 * Allocates adapter memory.
1887 qla2x00_mem_alloc(scsi_qla_host_t *ha)
1895 * This will loop only once if everything goes well, else some
1896 * number of retries will be performed to get around a kernel
1897 * bug where available mem is not allocated until after a
1898 * little delay and a retry.
1900 ha->request_ring = dma_alloc_coherent(&ha->pdev->dev,
1901 (ha->request_q_length + 1) * sizeof(request_t),
1902 &ha->request_dma, GFP_KERNEL);
1903 if (ha->request_ring == NULL) {
1904 qla_printk(KERN_WARNING, ha,
1905 "Memory Allocation failed - request_ring\n");
1907 qla2x00_mem_free(ha);
1913 ha->response_ring = dma_alloc_coherent(&ha->pdev->dev,
1914 (ha->response_q_length + 1) * sizeof(response_t),
1915 &ha->response_dma, GFP_KERNEL);
1916 if (ha->response_ring == NULL) {
1917 qla_printk(KERN_WARNING, ha,
1918 "Memory Allocation failed - response_ring\n");
1920 qla2x00_mem_free(ha);
1926 ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE,
1927 &ha->gid_list_dma, GFP_KERNEL);
1928 if (ha->gid_list == NULL) {
1929 qla_printk(KERN_WARNING, ha,
1930 "Memory Allocation failed - gid_list\n");
1932 qla2x00_mem_free(ha);
1938 snprintf(name, sizeof(name), "%s_%ld", QLA2XXX_DRIVER_NAME,
1940 ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev,
1941 DMA_POOL_SIZE, 8, 0);
1942 if (ha->s_dma_pool == NULL) {
1943 qla_printk(KERN_WARNING, ha,
1944 "Memory Allocation failed - s_dma_pool\n");
1946 qla2x00_mem_free(ha);
1952 /* get consistent memory allocated for init control block */
1953 ha->init_cb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
1955 if (ha->init_cb == NULL) {
1956 qla_printk(KERN_WARNING, ha,
1957 "Memory Allocation failed - init_cb\n");
1959 qla2x00_mem_free(ha);
1964 memset(ha->init_cb, 0, ha->init_cb_size);
1966 if (qla2x00_allocate_sp_pool(ha)) {
1967 qla_printk(KERN_WARNING, ha,
1968 "Memory Allocation failed - "
1969 "qla2x00_allocate_sp_pool()\n");
1971 qla2x00_mem_free(ha);
1977 /* Allocate memory for SNS commands */
1978 if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
1979 /* Get consistent memory allocated for SNS commands */
1980 ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev,
1981 sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma,
1983 if (ha->sns_cmd == NULL) {
1985 qla_printk(KERN_WARNING, ha,
1986 "Memory Allocation failed - sns_cmd\n");
1988 qla2x00_mem_free(ha);
1993 memset(ha->sns_cmd, 0, sizeof(struct sns_cmd_pkt));
1995 /* Get consistent memory allocated for MS IOCB */
1996 ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
1998 if (ha->ms_iocb == NULL) {
2000 qla_printk(KERN_WARNING, ha,
2001 "Memory Allocation failed - ms_iocb\n");
2003 qla2x00_mem_free(ha);
2008 memset(ha->ms_iocb, 0, sizeof(ms_iocb_entry_t));
2011 * Get consistent memory allocated for CT SNS
2014 ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev,
2015 sizeof(struct ct_sns_pkt), &ha->ct_sns_dma,
2017 if (ha->ct_sns == NULL) {
2019 qla_printk(KERN_WARNING, ha,
2020 "Memory Allocation failed - ct_sns\n");
2022 qla2x00_mem_free(ha);
2027 memset(ha->ct_sns, 0, sizeof(struct ct_sns_pkt));
2029 if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
2031 * Get consistent memory allocated for SFP
2034 ha->sfp_data = dma_pool_alloc(ha->s_dma_pool,
2035 GFP_KERNEL, &ha->sfp_data_dma);
2036 if (ha->sfp_data == NULL) {
2037 qla_printk(KERN_WARNING, ha,
2038 "Memory Allocation failed - "
2041 qla2x00_mem_free(ha);
2046 memset(ha->sfp_data, 0, SFP_BLOCK_SIZE);
2050 /* Done all allocations without any error. */
2053 } while (retry-- && status != 0);
2057 "%s(): **** FAILED ****\n", __func__);
2065 * Frees all adapter allocated memory.
2068 * ha = adapter block pointer.
2071 qla2x00_mem_free(scsi_qla_host_t *ha)
2073 struct list_head *fcpl, *fcptemp;
2078 DEBUG2(printk("%s(): ERROR invalid ha pointer.\n", __func__));
2083 qla2x00_free_sp_pool(ha);
2087 dma_free_coherent(&ha->pdev->dev,
2088 ntohl(ha->fw_dump->eft_size), ha->eft, ha->eft_dma);
2093 dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
2094 ha->sns_cmd, ha->sns_cmd_dma);
2097 dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
2098 ha->ct_sns, ha->ct_sns_dma);
2101 dma_pool_free(ha->s_dma_pool, ha->sfp_data, ha->sfp_data_dma);
2104 dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
2107 dma_pool_free(ha->s_dma_pool, ha->init_cb, ha->init_cb_dma);
2110 dma_pool_destroy(ha->s_dma_pool);
2113 dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
2116 if (ha->response_ring)
2117 dma_free_coherent(&ha->pdev->dev,
2118 (ha->response_q_length + 1) * sizeof(response_t),
2119 ha->response_ring, ha->response_dma);
2121 if (ha->request_ring)
2122 dma_free_coherent(&ha->pdev->dev,
2123 (ha->request_q_length + 1) * sizeof(request_t),
2124 ha->request_ring, ha->request_dma);
2129 ha->sns_cmd_dma = 0;
2133 ha->ms_iocb_dma = 0;
2135 ha->init_cb_dma = 0;
2137 ha->s_dma_pool = NULL;
2139 ha->gid_list = NULL;
2140 ha->gid_list_dma = 0;
2142 ha->response_ring = NULL;
2143 ha->response_dma = 0;
2144 ha->request_ring = NULL;
2145 ha->request_dma = 0;
2147 list_for_each_safe(fcpl, fcptemp, &ha->fcports) {
2148 fcport = list_entry(fcpl, fc_port_t, list);
2151 list_del_init(&fcport->list);
2154 INIT_LIST_HEAD(&ha->fcports);
2158 ha->fw_dump_reading = 0;
2160 vfree(ha->optrom_buffer);
2164 * qla2x00_allocate_sp_pool
2165 * This routine is called during initialization to allocate
2166 * memory for local srb_t.
2169 * ha = adapter block pointer.
2175 qla2x00_allocate_sp_pool(scsi_qla_host_t *ha)
2180 ha->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep);
2181 if (ha->srb_mempool == NULL) {
2182 qla_printk(KERN_INFO, ha, "Unable to allocate SRB mempool.\n");
2183 rval = QLA_FUNCTION_FAILED;
2189 * This routine frees all adapter allocated memory.
2193 qla2x00_free_sp_pool( scsi_qla_host_t *ha)
2195 if (ha->srb_mempool) {
2196 mempool_destroy(ha->srb_mempool);
2197 ha->srb_mempool = NULL;
2201 /**************************************************************************
2203 * This kernel thread is a task that is schedule by the interrupt handler
2204 * to perform the background processing for interrupts.
2207 * This task always run in the context of a kernel thread. It
2208 * is kick-off by the driver's detect code and starts up
2209 * up one per adapter. It immediately goes to sleep and waits for
2210 * some fibre event. When either the interrupt handler or
2211 * the timer routine detects a event it will one of the task
2212 * bits then wake us up.
2213 **************************************************************************/
2215 qla2x00_do_dpc(void *data)
2217 scsi_qla_host_t *ha;
2220 uint16_t next_loopid;
2222 ha = (scsi_qla_host_t *)data;
2224 set_user_nice(current, -20);
2226 while (!kthread_should_stop()) {
2227 DEBUG3(printk("qla2x00: DPC handler sleeping\n"));
2229 set_current_state(TASK_INTERRUPTIBLE);
2231 __set_current_state(TASK_RUNNING);
2233 DEBUG3(printk("qla2x00: DPC handler waking up\n"));
2235 /* Initialization not yet finished. Don't do anything yet. */
2236 if (!ha->flags.init_done)
2239 DEBUG3(printk("scsi(%ld): DPC handler\n", ha->host_no));
2243 if (ha->flags.mbox_busy) {
2248 if (test_and_clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) {
2250 DEBUG(printk("scsi(%ld): dpc: sched "
2251 "qla2x00_abort_isp ha = %p\n",
2253 if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
2256 if (qla2x00_abort_isp(ha)) {
2257 /* failed. retry later */
2258 set_bit(ISP_ABORT_NEEDED,
2261 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
2263 DEBUG(printk("scsi(%ld): dpc: qla2x00_abort_isp end\n",
2267 if (test_and_clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags))
2268 qla2x00_update_fcports(ha);
2270 if (test_and_clear_bit(LOOP_RESET_NEEDED, &ha->dpc_flags)) {
2271 DEBUG(printk("scsi(%ld): dpc: sched loop_reset()\n",
2273 qla2x00_loop_reset(ha);
2276 if (test_and_clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) &&
2277 (!(test_and_set_bit(RESET_ACTIVE, &ha->dpc_flags)))) {
2279 DEBUG(printk("scsi(%ld): qla2x00_reset_marker()\n",
2282 qla2x00_rst_aen(ha);
2283 clear_bit(RESET_ACTIVE, &ha->dpc_flags);
2286 /* Retry each device up to login retry count */
2287 if ((test_and_clear_bit(RELOGIN_NEEDED, &ha->dpc_flags)) &&
2288 !test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) &&
2289 atomic_read(&ha->loop_state) != LOOP_DOWN) {
2291 DEBUG(printk("scsi(%ld): qla2x00_port_login()\n",
2295 list_for_each_entry(fcport, &ha->fcports, list) {
2297 * If the port is not ONLINE then try to login
2298 * to it if we haven't run out of retries.
2300 if (atomic_read(&fcport->state) != FCS_ONLINE &&
2301 fcport->login_retry) {
2303 fcport->login_retry--;
2304 if (fcport->flags & FCF_FABRIC_DEVICE) {
2307 ha->isp_ops.fabric_logout(
2308 ha, fcport->loop_id,
2309 fcport->d_id.b.domain,
2310 fcport->d_id.b.area,
2311 fcport->d_id.b.al_pa);
2312 status = qla2x00_fabric_login(
2313 ha, fcport, &next_loopid);
2316 qla2x00_local_device_login(
2319 if (status == QLA_SUCCESS) {
2320 fcport->old_loop_id = fcport->loop_id;
2322 DEBUG(printk("scsi(%ld): port login OK: logged in ID 0x%x\n",
2323 ha->host_no, fcport->loop_id));
2325 qla2x00_update_fcport(ha,
2327 } else if (status == 1) {
2328 set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
2329 /* retry the login again */
2330 DEBUG(printk("scsi(%ld): Retrying %d login again loop_id 0x%x\n",
2332 fcport->login_retry, fcport->loop_id));
2334 fcport->login_retry = 0;
2337 if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
2340 DEBUG(printk("scsi(%ld): qla2x00_port_login - end\n",
2344 if ((test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags)) &&
2345 atomic_read(&ha->loop_state) != LOOP_DOWN) {
2347 clear_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags);
2348 DEBUG(printk("scsi(%ld): qla2x00_login_retry()\n",
2351 set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
2353 DEBUG(printk("scsi(%ld): qla2x00_login_retry - end\n",
2357 if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
2359 DEBUG(printk("scsi(%ld): qla2x00_loop_resync()\n",
2362 if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE,
2365 qla2x00_loop_resync(ha);
2367 clear_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags);
2370 DEBUG(printk("scsi(%ld): qla2x00_loop_resync - end\n",
2374 if (test_and_clear_bit(FCPORT_RESCAN_NEEDED, &ha->dpc_flags)) {
2376 DEBUG(printk("scsi(%ld): Rescan flagged fcports...\n",
2379 qla2x00_rescan_fcports(ha);
2381 DEBUG(printk("scsi(%ld): Rescan flagged fcports..."
2386 if (!ha->interrupts_on)
2387 ha->isp_ops.enable_intrs(ha);
2389 if (test_and_clear_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags))
2390 ha->isp_ops.beacon_blink(ha);
2393 } /* End of while(1) */
2395 DEBUG(printk("scsi(%ld): DPC handler exiting\n", ha->host_no));
2398 * Make sure that nobody tries to wake us up again.
2406 qla2xxx_wake_dpc(scsi_qla_host_t *ha)
2409 wake_up_process(ha->dpc_thread);
2414 * Processes asynchronous reset.
2417 * ha = adapter block pointer.
2420 qla2x00_rst_aen(scsi_qla_host_t *ha)
2422 if (ha->flags.online && !ha->flags.reset_active &&
2423 !atomic_read(&ha->loop_down_timer) &&
2424 !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) {
2426 clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
2429 * Issue marker command only when we are going to start
2432 ha->marker_needed = 1;
2433 } while (!atomic_read(&ha->loop_down_timer) &&
2434 (test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags)));
2439 qla2x00_sp_free_dma(scsi_qla_host_t *ha, srb_t *sp)
2441 struct scsi_cmnd *cmd = sp->cmd;
2443 if (sp->flags & SRB_DMA_VALID) {
2445 dma_unmap_sg(&ha->pdev->dev, cmd->request_buffer,
2446 cmd->use_sg, cmd->sc_data_direction);
2447 } else if (cmd->request_bufflen) {
2448 dma_unmap_single(&ha->pdev->dev, sp->dma_handle,
2449 cmd->request_bufflen, cmd->sc_data_direction);
2451 sp->flags &= ~SRB_DMA_VALID;
2457 qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *sp)
2459 struct scsi_cmnd *cmd = sp->cmd;
2461 qla2x00_sp_free_dma(ha, sp);
2463 mempool_free(sp, ha->srb_mempool);
2465 cmd->scsi_done(cmd);
2468 /**************************************************************************
2474 * Context: Interrupt
2475 ***************************************************************************/
2477 qla2x00_timer(scsi_qla_host_t *ha)
2479 unsigned long cpu_flags = 0;
2487 * Ports - Port down timer.
2489 * Whenever, a port is in the LOST state we start decrementing its port
2490 * down timer every second until it reaches zero. Once it reaches zero
2491 * the port it marked DEAD.
2494 list_for_each_entry(fcport, &ha->fcports, list) {
2495 if (fcport->port_type != FCT_TARGET)
2498 if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
2500 if (atomic_read(&fcport->port_down_timer) == 0)
2503 if (atomic_dec_and_test(&fcport->port_down_timer) != 0)
2504 atomic_set(&fcport->state, FCS_DEVICE_DEAD);
2506 DEBUG(printk("scsi(%ld): fcport-%d - port retry count: "
2509 t, atomic_read(&fcport->port_down_timer)));
2512 } /* End of for fcport */
2515 /* Loop down handler. */
2516 if (atomic_read(&ha->loop_down_timer) > 0 &&
2517 !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags)) && ha->flags.online) {
2519 if (atomic_read(&ha->loop_down_timer) ==
2520 ha->loop_down_abort_time) {
2522 DEBUG(printk("scsi(%ld): Loop Down - aborting the "
2523 "queues before time expire\n",
2526 if (!IS_QLA2100(ha) && ha->link_down_timeout)
2527 atomic_set(&ha->loop_state, LOOP_DEAD);
2529 /* Schedule an ISP abort to return any tape commands. */
2530 spin_lock_irqsave(&ha->hardware_lock, cpu_flags);
2531 for (index = 1; index < MAX_OUTSTANDING_COMMANDS;
2535 sp = ha->outstanding_cmds[index];
2539 if (!(sfcp->flags & FCF_TAPE_PRESENT))
2542 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
2545 spin_unlock_irqrestore(&ha->hardware_lock, cpu_flags);
2547 set_bit(ABORT_QUEUES_NEEDED, &ha->dpc_flags);
2551 /* if the loop has been down for 4 minutes, reinit adapter */
2552 if (atomic_dec_and_test(&ha->loop_down_timer) != 0) {
2553 DEBUG(printk("scsi(%ld): Loop down exceed 4 mins - "
2554 "restarting queues.\n",
2557 set_bit(RESTART_QUEUES_NEEDED, &ha->dpc_flags);
2560 if (!(ha->device_flags & DFLG_NO_CABLE)) {
2561 DEBUG(printk("scsi(%ld): Loop down - "
2564 qla_printk(KERN_WARNING, ha,
2565 "Loop down - aborting ISP.\n");
2567 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
2570 DEBUG3(printk("scsi(%ld): Loop Down - seconds remaining %d\n",
2572 atomic_read(&ha->loop_down_timer)));
2575 /* Check if beacon LED needs to be blinked */
2576 if (ha->beacon_blink_led == 1) {
2577 set_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags);
2581 /* Schedule the DPC routine if needed */
2582 if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) ||
2583 test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) ||
2584 test_bit(LOOP_RESET_NEEDED, &ha->dpc_flags) ||
2585 test_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags) ||
2587 test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) ||
2588 test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) ||
2589 test_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags) ||
2590 test_bit(RELOGIN_NEEDED, &ha->dpc_flags)))
2591 qla2xxx_wake_dpc(ha);
2593 qla2x00_restart_timer(ha, WATCH_INTERVAL);
2596 /* XXX(hch): crude hack to emulate a down_timeout() */
2598 qla2x00_down_timeout(struct semaphore *sema, unsigned long timeout)
2600 const unsigned int step = 100; /* msecs */
2601 unsigned int iterations = jiffies_to_msecs(timeout)/100;
2604 if (!down_trylock(sema))
2606 if (msleep_interruptible(step))
2608 } while (--iterations >= 0);
2613 /* Firmware interface routines. */
2616 #define FW_ISP21XX 0
2617 #define FW_ISP22XX 1
2618 #define FW_ISP2300 2
2619 #define FW_ISP2322 3
2620 #define FW_ISP24XX 4
2622 #define FW_FILE_ISP21XX "ql2100_fw.bin"
2623 #define FW_FILE_ISP22XX "ql2200_fw.bin"
2624 #define FW_FILE_ISP2300 "ql2300_fw.bin"
2625 #define FW_FILE_ISP2322 "ql2322_fw.bin"
2626 #define FW_FILE_ISP24XX "ql2400_fw.bin"
2628 static DECLARE_MUTEX(qla_fw_lock);
2630 static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
2631 { .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, },
2632 { .name = FW_FILE_ISP22XX, .segs = { 0x1000, 0 }, },
2633 { .name = FW_FILE_ISP2300, .segs = { 0x800, 0 }, },
2634 { .name = FW_FILE_ISP2322, .segs = { 0x800, 0x1c000, 0x1e000, 0 }, },
2635 { .name = FW_FILE_ISP24XX, },
2639 qla2x00_request_firmware(scsi_qla_host_t *ha)
2641 struct fw_blob *blob;
2644 if (IS_QLA2100(ha)) {
2645 blob = &qla_fw_blobs[FW_ISP21XX];
2646 } else if (IS_QLA2200(ha)) {
2647 blob = &qla_fw_blobs[FW_ISP22XX];
2648 } else if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
2649 blob = &qla_fw_blobs[FW_ISP2300];
2650 } else if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
2651 blob = &qla_fw_blobs[FW_ISP2322];
2652 } else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
2653 blob = &qla_fw_blobs[FW_ISP24XX];
2660 if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) {
2661 DEBUG2(printk("scsi(%ld): Failed to load firmware image "
2662 "(%s).\n", ha->host_no, blob->name));
2674 qla2x00_release_firmware(void)
2679 for (idx = 0; idx < FW_BLOBS; idx++)
2680 if (qla_fw_blobs[idx].fw)
2681 release_firmware(qla_fw_blobs[idx].fw);
2685 static struct pci_device_id qla2xxx_pci_tbl[] = {
2686 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100) },
2687 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200) },
2688 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300) },
2689 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312) },
2690 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322) },
2691 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312) },
2692 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322) },
2693 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422) },
2694 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432) },
2695 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5422) },
2696 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) },
2699 MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
2701 static struct pci_driver qla2xxx_pci_driver = {
2702 .name = QLA2XXX_DRIVER_NAME,
2704 .owner = THIS_MODULE,
2706 .id_table = qla2xxx_pci_tbl,
2707 .probe = qla2x00_probe_one,
2708 .remove = __devexit_p(qla2x00_remove_one),
2712 * qla2x00_module_init - Module initialization.
2715 qla2x00_module_init(void)
2719 /* Allocate cache for SRBs. */
2720 srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0,
2721 SLAB_HWCACHE_ALIGN, NULL, NULL);
2722 if (srb_cachep == NULL) {
2724 "qla2xxx: Unable to allocate SRB cache...Failing load!\n");
2728 /* Derive version string. */
2729 strcpy(qla2x00_version_str, QLA2XXX_VERSION);
2730 if (ql2xextended_error_logging)
2731 strcat(qla2x00_version_str, "-debug");
2733 qla2xxx_transport_template =
2734 fc_attach_transport(&qla2xxx_transport_functions);
2735 if (!qla2xxx_transport_template)
2738 printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
2739 ret = pci_register_driver(&qla2xxx_pci_driver);
2741 kmem_cache_destroy(srb_cachep);
2742 fc_release_transport(qla2xxx_transport_template);
2748 * qla2x00_module_exit - Module cleanup.
2751 qla2x00_module_exit(void)
2753 pci_unregister_driver(&qla2xxx_pci_driver);
2754 qla2x00_release_firmware();
2755 kmem_cache_destroy(srb_cachep);
2756 fc_release_transport(qla2xxx_transport_template);
2759 module_init(qla2x00_module_init);
2760 module_exit(qla2x00_module_exit);
2762 MODULE_AUTHOR("QLogic Corporation");
2763 MODULE_DESCRIPTION("QLogic Fibre Channel HBA Driver");
2764 MODULE_LICENSE("GPL");
2765 MODULE_VERSION(QLA2XXX_VERSION);
2766 MODULE_FIRMWARE(FW_FILE_ISP21XX);
2767 MODULE_FIRMWARE(FW_FILE_ISP22XX);
2768 MODULE_FIRMWARE(FW_FILE_ISP2300);
2769 MODULE_FIRMWARE(FW_FILE_ISP2322);
2770 MODULE_FIRMWARE(FW_FILE_ISP24XX);