2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2005 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
9 #include <linux/moduleparam.h>
10 #include <linux/vmalloc.h>
11 #include <linux/delay.h>
12 #include <linux/kthread.h>
14 #include <scsi/scsi_tcq.h>
15 #include <scsi/scsicam.h>
16 #include <scsi/scsi_transport.h>
17 #include <scsi/scsi_transport_fc.h>
22 char qla2x00_version_str[40];
25 * SRB allocation cache
27 static struct kmem_cache *srb_cachep;
30 * Ioctl related information.
33 int ql2xlogintimeout = 20;
34 module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
35 MODULE_PARM_DESC(ql2xlogintimeout,
36 "Login timeout value in seconds.");
38 int qlport_down_retry;
39 module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR);
40 MODULE_PARM_DESC(qlport_down_retry,
41 "Maximum number of command retries to a port that returns "
42 "a PORT-DOWN status.");
44 int ql2xplogiabsentdevice;
45 module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR);
46 MODULE_PARM_DESC(ql2xplogiabsentdevice,
47 "Option to enable PLOGI to devices that are not present after "
48 "a Fabric scan. This is needed for several broken switches. "
49 "Default is 0 - no PLOGI. 1 - perfom PLOGI.");
51 int ql2xloginretrycount = 0;
52 module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
53 MODULE_PARM_DESC(ql2xloginretrycount,
54 "Specify an alternate value for the NVRAM login retry count.");
56 int ql2xallocfwdump = 1;
57 module_param(ql2xallocfwdump, int, S_IRUGO|S_IRUSR);
58 MODULE_PARM_DESC(ql2xallocfwdump,
59 "Option to enable allocation of memory for a firmware dump "
60 "during HBA initialization. Memory allocation requirements "
61 "vary by ISP type. Default is 1 - allocate memory.");
63 int ql2xextended_error_logging;
64 module_param(ql2xextended_error_logging, int, S_IRUGO|S_IWUSR);
65 MODULE_PARM_DESC(ql2xextended_error_logging,
66 "Option to enable extended error logging, "
67 "Default is 0 - no logging. 1 - log errors.");
69 static void qla2x00_free_device(scsi_qla_host_t *);
71 static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
74 module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
75 MODULE_PARM_DESC(ql2xfdmienable,
76 "Enables FDMI registratons "
77 "Default is 0 - no FDMI. 1 - perfom FDMI.");
79 #define MAX_Q_DEPTH 32
80 static int ql2xmaxqdepth = MAX_Q_DEPTH;
81 module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
82 MODULE_PARM_DESC(ql2xmaxqdepth,
83 "Maximum queue depth to report for target devices.");
85 int ql2xqfullrampup = 120;
86 module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR);
87 MODULE_PARM_DESC(ql2xqfullrampup,
88 "Number of seconds to wait to begin to ramp-up the queue "
89 "depth for a device after a queue-full condition has been "
90 "detected. Default is 120 seconds.");
93 * SCSI host template entry points
95 static int qla2xxx_slave_configure(struct scsi_device * device);
96 static int qla2xxx_slave_alloc(struct scsi_device *);
97 static int qla2xxx_scan_finished(struct Scsi_Host *, unsigned long time);
98 static void qla2xxx_scan_start(struct Scsi_Host *);
99 static void qla2xxx_slave_destroy(struct scsi_device *);
100 static int qla2x00_queuecommand(struct scsi_cmnd *cmd,
101 void (*fn)(struct scsi_cmnd *));
102 static int qla24xx_queuecommand(struct scsi_cmnd *cmd,
103 void (*fn)(struct scsi_cmnd *));
104 static int qla2xxx_eh_abort(struct scsi_cmnd *);
105 static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
106 static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
107 static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
108 static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *);
110 static int qla2x00_change_queue_depth(struct scsi_device *, int);
111 static int qla2x00_change_queue_type(struct scsi_device *, int);
113 static struct scsi_host_template qla2x00_driver_template = {
114 .module = THIS_MODULE,
115 .name = QLA2XXX_DRIVER_NAME,
116 .queuecommand = qla2x00_queuecommand,
118 .eh_abort_handler = qla2xxx_eh_abort,
119 .eh_device_reset_handler = qla2xxx_eh_device_reset,
120 .eh_bus_reset_handler = qla2xxx_eh_bus_reset,
121 .eh_host_reset_handler = qla2xxx_eh_host_reset,
123 .slave_configure = qla2xxx_slave_configure,
125 .slave_alloc = qla2xxx_slave_alloc,
126 .slave_destroy = qla2xxx_slave_destroy,
127 .scan_finished = qla2xxx_scan_finished,
128 .scan_start = qla2xxx_scan_start,
129 .change_queue_depth = qla2x00_change_queue_depth,
130 .change_queue_type = qla2x00_change_queue_type,
133 .use_clustering = ENABLE_CLUSTERING,
134 .sg_tablesize = SG_ALL,
137 * The RISC allows for each command to transfer (2^32-1) bytes of data,
138 * which equates to 0x800000 sectors.
140 .max_sectors = 0xFFFF,
141 .shost_attrs = qla2x00_host_attrs,
144 struct scsi_host_template qla24xx_driver_template = {
145 .module = THIS_MODULE,
146 .name = QLA2XXX_DRIVER_NAME,
147 .queuecommand = qla24xx_queuecommand,
149 .eh_abort_handler = qla2xxx_eh_abort,
150 .eh_device_reset_handler = qla2xxx_eh_device_reset,
151 .eh_bus_reset_handler = qla2xxx_eh_bus_reset,
152 .eh_host_reset_handler = qla2xxx_eh_host_reset,
154 .slave_configure = qla2xxx_slave_configure,
156 .slave_alloc = qla2xxx_slave_alloc,
157 .slave_destroy = qla2xxx_slave_destroy,
158 .scan_finished = qla2xxx_scan_finished,
159 .scan_start = qla2xxx_scan_start,
160 .change_queue_depth = qla2x00_change_queue_depth,
161 .change_queue_type = qla2x00_change_queue_type,
164 .use_clustering = ENABLE_CLUSTERING,
165 .sg_tablesize = SG_ALL,
167 .max_sectors = 0xFFFF,
168 .shost_attrs = qla2x00_host_attrs,
171 static struct scsi_transport_template *qla2xxx_transport_template = NULL;
172 struct scsi_transport_template *qla2xxx_transport_vport_template = NULL;
174 /* TODO Convert to inlines
180 qla2x00_start_timer(scsi_qla_host_t *ha, void *func, unsigned long interval)
182 init_timer(&ha->timer);
183 ha->timer.expires = jiffies + interval * HZ;
184 ha->timer.data = (unsigned long)ha;
185 ha->timer.function = (void (*)(unsigned long))func;
186 add_timer(&ha->timer);
187 ha->timer_active = 1;
191 qla2x00_restart_timer(scsi_qla_host_t *ha, unsigned long interval)
193 mod_timer(&ha->timer, jiffies + interval * HZ);
196 static __inline__ void
197 qla2x00_stop_timer(scsi_qla_host_t *ha)
199 del_timer_sync(&ha->timer);
200 ha->timer_active = 0;
203 static int qla2x00_do_dpc(void *data);
205 static void qla2x00_rst_aen(scsi_qla_host_t *);
207 static int qla2x00_mem_alloc(scsi_qla_host_t *);
208 static void qla2x00_mem_free(scsi_qla_host_t *ha);
209 static void qla2x00_sp_free_dma(scsi_qla_host_t *, srb_t *);
211 /* -------------------------------------------------------------------------- */
214 qla2x00_pci_info_str(struct scsi_qla_host *ha, char *str)
216 static char *pci_bus_modes[] = {
217 "33", "66", "100", "133",
222 pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9;
225 strcat(str, pci_bus_modes[pci_bus]);
227 pci_bus = (ha->pci_attr & BIT_8) >> 8;
229 strcat(str, pci_bus_modes[pci_bus]);
231 strcat(str, " MHz)");
237 qla24xx_pci_info_str(struct scsi_qla_host *ha, char *str)
239 static char *pci_bus_modes[] = { "33", "66", "100", "133", };
243 pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
246 uint16_t pcie_lstat, lspeed, lwidth;
249 pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
250 lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
251 lwidth = (pcie_lstat &
252 (BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4;
254 strcpy(str, "PCIe (");
256 strcat(str, "2.5Gb/s ");
257 else if (lspeed == 2)
258 strcat(str, "5.0Gb/s ");
260 strcat(str, "<unknown> ");
261 snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
268 pci_bus = (ha->pci_attr & CSRX_PCIX_BUS_MODE_MASK) >> 8;
269 if (pci_bus == 0 || pci_bus == 8) {
271 strcat(str, pci_bus_modes[pci_bus >> 3]);
275 strcat(str, "Mode 2");
277 strcat(str, "Mode 1");
279 strcat(str, pci_bus_modes[pci_bus & ~BIT_2]);
281 strcat(str, " MHz)");
287 qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
291 sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
292 ha->fw_minor_version,
293 ha->fw_subminor_version);
295 if (ha->fw_attributes & BIT_9) {
300 switch (ha->fw_attributes & 0xFF) {
314 sprintf(un_str, "(%x)", ha->fw_attributes);
318 if (ha->fw_attributes & 0x100)
325 qla24xx_fw_version_str(struct scsi_qla_host *ha, char *str)
327 sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
328 ha->fw_minor_version,
329 ha->fw_subminor_version);
331 if (ha->fw_attributes & BIT_0)
332 strcat(str, "[Class 2] ");
333 if (ha->fw_attributes & BIT_1)
334 strcat(str, "[IP] ");
335 if (ha->fw_attributes & BIT_2)
336 strcat(str, "[Multi-ID] ");
337 if (ha->fw_attributes & BIT_3)
338 strcat(str, "[SB-2] ");
339 if (ha->fw_attributes & BIT_4)
340 strcat(str, "[T10 CRC] ");
341 if (ha->fw_attributes & BIT_5)
342 strcat(str, "[VI] ");
343 if (ha->fw_attributes & BIT_13)
344 strcat(str, "[Experimental]");
348 static inline srb_t *
349 qla2x00_get_new_sp(scsi_qla_host_t *ha, fc_port_t *fcport,
350 struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
354 sp = mempool_alloc(ha->srb_mempool, GFP_ATOMIC);
362 CMD_SP(cmd) = (void *)sp;
363 cmd->scsi_done = done;
369 qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
371 scsi_qla_host_t *ha = shost_priv(cmd->device->host);
372 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
373 struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
377 if (unlikely(pci_channel_offline(ha->pdev))) {
378 cmd->result = DID_REQUEUE << 16;
379 goto qc_fail_command;
382 rval = fc_remote_port_chkready(rport);
385 goto qc_fail_command;
388 /* Close window on fcport/rport state-transitioning. */
389 if (!*(fc_port_t **)rport->dd_data) {
390 cmd->result = DID_IMM_RETRY << 16;
391 goto qc_fail_command;
394 if (atomic_read(&fcport->state) != FCS_ONLINE) {
395 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
396 atomic_read(&ha->loop_state) == LOOP_DEAD) {
397 cmd->result = DID_NO_CONNECT << 16;
398 goto qc_fail_command;
403 spin_unlock_irq(ha->host->host_lock);
405 sp = qla2x00_get_new_sp(ha, fcport, cmd, done);
407 goto qc_host_busy_lock;
409 rval = qla2x00_start_scsi(sp);
410 if (rval != QLA_SUCCESS)
411 goto qc_host_busy_free_sp;
413 spin_lock_irq(ha->host->host_lock);
417 qc_host_busy_free_sp:
418 qla2x00_sp_free_dma(ha, sp);
419 mempool_free(sp, ha->srb_mempool);
422 spin_lock_irq(ha->host->host_lock);
425 return SCSI_MLQUEUE_HOST_BUSY;
435 qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
437 scsi_qla_host_t *ha = shost_priv(cmd->device->host);
438 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
439 struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
442 scsi_qla_host_t *pha = to_qla_parent(ha);
444 if (unlikely(pci_channel_offline(ha->pdev))) {
445 cmd->result = DID_REQUEUE << 16;
446 goto qc24_fail_command;
449 rval = fc_remote_port_chkready(rport);
452 goto qc24_fail_command;
455 /* Close window on fcport/rport state-transitioning. */
456 if (!*(fc_port_t **)rport->dd_data) {
457 cmd->result = DID_IMM_RETRY << 16;
458 goto qc24_fail_command;
461 if (atomic_read(&fcport->state) != FCS_ONLINE) {
462 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
463 atomic_read(&pha->loop_state) == LOOP_DEAD) {
464 cmd->result = DID_NO_CONNECT << 16;
465 goto qc24_fail_command;
470 spin_unlock_irq(ha->host->host_lock);
472 sp = qla2x00_get_new_sp(pha, fcport, cmd, done);
474 goto qc24_host_busy_lock;
476 rval = qla24xx_start_scsi(sp);
477 if (rval != QLA_SUCCESS)
478 goto qc24_host_busy_free_sp;
480 spin_lock_irq(ha->host->host_lock);
484 qc24_host_busy_free_sp:
485 qla2x00_sp_free_dma(pha, sp);
486 mempool_free(sp, pha->srb_mempool);
489 spin_lock_irq(ha->host->host_lock);
492 return SCSI_MLQUEUE_HOST_BUSY;
502 * qla2x00_eh_wait_on_command
503 * Waits for the command to be returned by the Firmware for some
507 * ha = actual ha whose done queue will contain the command
508 * returned by firmware.
509 * cmd = Scsi Command to wait on.
510 * flag = Abort/Reset(Bus or Device Reset)
517 qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd)
519 #define ABORT_POLLING_PERIOD 1000
520 #define ABORT_WAIT_ITER ((10 * 1000) / (ABORT_POLLING_PERIOD))
521 unsigned long wait_iter = ABORT_WAIT_ITER;
522 int ret = QLA_SUCCESS;
524 while (CMD_SP(cmd)) {
525 msleep(ABORT_POLLING_PERIOD);
531 ret = QLA_FUNCTION_FAILED;
537 * qla2x00_wait_for_hba_online
538 * Wait till the HBA is online after going through
539 * <= MAX_RETRIES_OF_ISP_ABORT or
540 * finally HBA is disabled ie marked offline
543 * ha - pointer to host adapter structure
546 * Does context switching-Release SPIN_LOCK
547 * (if any) before calling this routine.
550 * Success (Adapter is online) : 0
551 * Failed (Adapter is offline/disabled) : 1
554 qla2x00_wait_for_hba_online(scsi_qla_host_t *ha)
557 unsigned long wait_online;
558 scsi_qla_host_t *pha = to_qla_parent(ha);
560 wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ);
561 while (((test_bit(ISP_ABORT_NEEDED, &pha->dpc_flags)) ||
562 test_bit(ABORT_ISP_ACTIVE, &pha->dpc_flags) ||
563 test_bit(ISP_ABORT_RETRY, &pha->dpc_flags) ||
564 pha->dpc_active) && time_before(jiffies, wait_online)) {
568 if (pha->flags.online)
569 return_status = QLA_SUCCESS;
571 return_status = QLA_FUNCTION_FAILED;
573 DEBUG2(printk("%s return_status=%d\n",__func__,return_status));
575 return (return_status);
579 * qla2x00_wait_for_loop_ready
580 * Wait for MAX_LOOP_TIMEOUT(5 min) value for loop
581 * to be in LOOP_READY state.
583 * ha - pointer to host adapter structure
586 * Does context switching-Release SPIN_LOCK
587 * (if any) before calling this routine.
591 * Success (LOOP_READY) : 0
592 * Failed (LOOP_NOT_READY) : 1
595 qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha)
597 int return_status = QLA_SUCCESS;
598 unsigned long loop_timeout ;
599 scsi_qla_host_t *pha = to_qla_parent(ha);
601 /* wait for 5 min at the max for loop to be ready */
602 loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ);
604 while ((!atomic_read(&pha->loop_down_timer) &&
605 atomic_read(&pha->loop_state) == LOOP_DOWN) ||
606 atomic_read(&pha->loop_state) != LOOP_READY) {
607 if (atomic_read(&pha->loop_state) == LOOP_DEAD) {
608 return_status = QLA_FUNCTION_FAILED;
612 if (time_after_eq(jiffies, loop_timeout)) {
613 return_status = QLA_FUNCTION_FAILED;
617 return (return_status);
621 qla2x00_block_error_handler(struct scsi_cmnd *cmnd)
623 struct Scsi_Host *shost = cmnd->device->host;
624 struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
627 spin_lock_irqsave(shost->host_lock, flags);
628 while (rport->port_state == FC_PORTSTATE_BLOCKED) {
629 spin_unlock_irqrestore(shost->host_lock, flags);
631 spin_lock_irqsave(shost->host_lock, flags);
633 spin_unlock_irqrestore(shost->host_lock, flags);
637 /**************************************************************************
641 * The abort function will abort the specified command.
644 * cmd = Linux SCSI command packet to be aborted.
647 * Either SUCCESS or FAILED.
650 * Only return FAILED if command not returned by firmware.
651 **************************************************************************/
653 qla2xxx_eh_abort(struct scsi_cmnd *cmd)
655 scsi_qla_host_t *ha = shost_priv(cmd->device->host);
658 unsigned int id, lun;
659 unsigned long serial;
662 scsi_qla_host_t *pha = to_qla_parent(ha);
664 qla2x00_block_error_handler(cmd);
671 id = cmd->device->id;
672 lun = cmd->device->lun;
673 serial = cmd->serial_number;
675 /* Check active list for command command. */
676 spin_lock_irqsave(&pha->hardware_lock, flags);
677 for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
678 sp = pha->outstanding_cmds[i];
686 DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld.\n",
687 __func__, ha->host_no, sp, serial));
688 DEBUG3(qla2x00_print_scsi_cmd(cmd));
690 spin_unlock_irqrestore(&pha->hardware_lock, flags);
691 if (ha->isp_ops->abort_command(ha, sp)) {
692 DEBUG2(printk("%s(%ld): abort_command "
693 "mbx failed.\n", __func__, ha->host_no));
695 DEBUG3(printk("%s(%ld): abort_command "
696 "mbx success.\n", __func__, ha->host_no));
699 spin_lock_irqsave(&pha->hardware_lock, flags);
703 spin_unlock_irqrestore(&pha->hardware_lock, flags);
705 /* Wait for the command to be returned. */
707 if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
708 qla_printk(KERN_ERR, ha,
709 "scsi(%ld:%d:%d): Abort handler timed out -- %lx "
710 "%x.\n", ha->host_no, id, lun, serial, ret);
715 qla_printk(KERN_INFO, ha,
716 "scsi(%ld:%d:%d): Abort command issued -- %d %lx %x.\n",
717 ha->host_no, id, lun, wait, serial, ret);
722 /**************************************************************************
723 * qla2x00_eh_wait_for_pending_target_commands
726 * Waits for all the commands to come back from the specified target.
729 * ha - pointer to scsi_qla_host structure.
732 * Either SUCCESS or FAILED.
735 **************************************************************************/
737 qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
742 struct scsi_cmnd *cmd;
744 scsi_qla_host_t *pha = to_qla_parent(ha);
749 * Waiting for all commands for the designated target in the active
752 for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
753 spin_lock_irqsave(&pha->hardware_lock, flags);
754 sp = pha->outstanding_cmds[cnt];
757 spin_unlock_irqrestore(&pha->hardware_lock, flags);
758 if (cmd->device->id == t &&
759 ha->vp_idx == sp->ha->vp_idx) {
760 if (!qla2x00_eh_wait_on_command(ha, cmd)) {
766 spin_unlock_irqrestore(&pha->hardware_lock, flags);
773 /**************************************************************************
774 * qla2xxx_eh_device_reset
777 * The device reset function will reset the target and abort any
778 * executing commands.
780 * NOTE: The use of SP is undefined within this context. Do *NOT*
781 * attempt to use this value, even if you determine it is
785 * cmd = Linux SCSI command packet of the command that cause the
789 * SUCCESS/FAILURE (defined as macro in scsi.h).
791 **************************************************************************/
793 qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
795 scsi_qla_host_t *ha = shost_priv(cmd->device->host);
796 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
798 unsigned int id, lun;
799 unsigned long serial;
801 qla2x00_block_error_handler(cmd);
803 id = cmd->device->id;
804 lun = cmd->device->lun;
805 serial = cmd->serial_number;
810 qla_printk(KERN_INFO, ha,
811 "scsi(%ld:%d:%d): DEVICE RESET ISSUED.\n", ha->host_no, id, lun);
813 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
814 goto eh_dev_reset_done;
816 if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
817 if (qla2x00_device_reset(ha, fcport) == 0)
820 #if defined(LOGOUT_AFTER_DEVICE_RESET)
821 if (ret == SUCCESS) {
822 if (fcport->flags & FC_FABRIC_DEVICE) {
823 ha->isp_ops->fabric_logout(ha, fcport->loop_id);
824 qla2x00_mark_device_lost(ha, fcport, 0, 0);
829 DEBUG2(printk(KERN_INFO
830 "%s failed: loop not ready\n",__func__));
834 DEBUG3(printk("%s(%ld): device reset failed\n",
835 __func__, ha->host_no));
836 qla_printk(KERN_INFO, ha, "%s: device reset failed\n",
839 goto eh_dev_reset_done;
842 /* Flush outstanding commands. */
843 if (qla2x00_eh_wait_for_pending_target_commands(ha, id))
846 DEBUG3(printk("%s(%ld): failed while waiting for commands\n",
847 __func__, ha->host_no));
848 qla_printk(KERN_INFO, ha,
849 "%s: failed while waiting for commands\n", __func__);
851 qla_printk(KERN_INFO, ha,
852 "scsi(%ld:%d:%d): DEVICE RESET SUCCEEDED.\n", ha->host_no,
858 /**************************************************************************
859 * qla2x00_eh_wait_for_pending_commands
862 * Waits for all the commands to come back from the specified host.
865 * ha - pointer to scsi_qla_host structure.
872 **************************************************************************/
874 qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
879 struct scsi_cmnd *cmd;
885 * Waiting for all commands for the designated target in the active
888 for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
889 spin_lock_irqsave(&ha->hardware_lock, flags);
890 sp = ha->outstanding_cmds[cnt];
893 spin_unlock_irqrestore(&ha->hardware_lock, flags);
894 status = qla2x00_eh_wait_on_command(ha, cmd);
899 spin_unlock_irqrestore(&ha->hardware_lock, flags);
906 /**************************************************************************
907 * qla2xxx_eh_bus_reset
910 * The bus reset function will reset the bus and abort any executing
914 * cmd = Linux SCSI command packet of the command that cause the
918 * SUCCESS/FAILURE (defined as macro in scsi.h).
920 **************************************************************************/
922 qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
924 scsi_qla_host_t *ha = shost_priv(cmd->device->host);
925 scsi_qla_host_t *pha = to_qla_parent(ha);
926 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
928 unsigned int id, lun;
929 unsigned long serial;
931 qla2x00_block_error_handler(cmd);
933 id = cmd->device->id;
934 lun = cmd->device->lun;
935 serial = cmd->serial_number;
940 qla_printk(KERN_INFO, ha,
941 "scsi(%ld:%d:%d): LOOP RESET ISSUED.\n", ha->host_no, id, lun);
943 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) {
944 DEBUG2(printk("%s failed:board disabled\n",__func__));
945 goto eh_bus_reset_done;
948 if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
949 if (qla2x00_loop_reset(ha) == QLA_SUCCESS)
953 goto eh_bus_reset_done;
955 /* Flush outstanding commands. */
956 if (!qla2x00_eh_wait_for_pending_commands(pha))
960 qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
961 (ret == FAILED) ? "failed" : "succeded");
966 /**************************************************************************
967 * qla2xxx_eh_host_reset
970 * The reset function will reset the Adapter.
973 * cmd = Linux SCSI command packet of the command that cause the
977 * Either SUCCESS or FAILED.
980 **************************************************************************/
982 qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
984 scsi_qla_host_t *ha = shost_priv(cmd->device->host);
985 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
987 unsigned int id, lun;
988 unsigned long serial;
989 scsi_qla_host_t *pha = to_qla_parent(ha);
991 qla2x00_block_error_handler(cmd);
993 id = cmd->device->id;
994 lun = cmd->device->lun;
995 serial = cmd->serial_number;
1000 qla_printk(KERN_INFO, ha,
1001 "scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no, id, lun);
1003 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
1004 goto eh_host_reset_lock;
1007 * Fixme-may be dpc thread is active and processing
1008 * loop_resync,so wait a while for it to
1009 * be completed and then issue big hammer.Otherwise
1010 * it may cause I/O failure as big hammer marks the
1011 * devices as lost kicking of the port_down_timer
1012 * while dpc is stuck for the mailbox to complete.
1014 qla2x00_wait_for_loop_ready(ha);
1015 set_bit(ABORT_ISP_ACTIVE, &pha->dpc_flags);
1016 if (qla2x00_abort_isp(pha)) {
1017 clear_bit(ABORT_ISP_ACTIVE, &pha->dpc_flags);
1018 /* failed. schedule dpc to try */
1019 set_bit(ISP_ABORT_NEEDED, &pha->dpc_flags);
1021 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
1022 goto eh_host_reset_lock;
1024 clear_bit(ABORT_ISP_ACTIVE, &pha->dpc_flags);
1026 /* Waiting for our command in done_queue to be returned to OS.*/
1027 if (qla2x00_eh_wait_for_pending_commands(pha))
1031 qla2x00_vp_abort_isp(ha);
1034 qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
1035 (ret == FAILED) ? "failed" : "succeded");
1041 * qla2x00_loop_reset
1045 * ha = adapter block pointer.
1051 qla2x00_loop_reset(scsi_qla_host_t *ha)
1054 struct fc_port *fcport;
1056 if (ha->flags.enable_lip_full_login) {
1057 ret = qla2x00_full_login_lip(ha);
1058 if (ret != QLA_SUCCESS) {
1059 DEBUG2_3(printk("%s(%ld): bus_reset failed: "
1060 "full_login_lip=%d.\n", __func__, ha->host_no,
1063 atomic_set(&ha->loop_state, LOOP_DOWN);
1064 atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
1065 qla2x00_mark_all_devices_lost(ha, 0);
1066 qla2x00_wait_for_loop_ready(ha);
1069 if (ha->flags.enable_lip_reset) {
1070 ret = qla2x00_lip_reset(ha);
1071 if (ret != QLA_SUCCESS) {
1072 DEBUG2_3(printk("%s(%ld): bus_reset failed: "
1073 "lip_reset=%d.\n", __func__, ha->host_no, ret));
1075 qla2x00_wait_for_loop_ready(ha);
1078 if (ha->flags.enable_target_reset) {
1079 list_for_each_entry(fcport, &ha->fcports, list) {
1080 if (fcport->port_type != FCT_TARGET)
1083 ret = qla2x00_device_reset(ha, fcport);
1084 if (ret != QLA_SUCCESS) {
1085 DEBUG2_3(printk("%s(%ld): bus_reset failed: "
1086 "target_reset=%d d_id=%x.\n", __func__,
1087 ha->host_no, ret, fcport->d_id.b24));
1092 /* Issue marker command only when we are going to start the I/O */
1093 ha->marker_needed = 1;
1099 * qla2x00_device_reset
1100 * Issue bus device reset message to the target.
1103 * ha = adapter block pointer.
1105 * TARGET_QUEUE_LOCK must be released.
1106 * ADAPTER_STATE_LOCK must be released.
1112 qla2x00_device_reset(scsi_qla_host_t *ha, fc_port_t *reset_fcport)
1114 /* Abort Target command will clear Reservation */
1115 return ha->isp_ops->abort_target(reset_fcport);
1119 qla2x00_abort_all_cmds(scsi_qla_host_t *ha, int res)
1122 unsigned long flags;
1125 spin_lock_irqsave(&ha->hardware_lock, flags);
1126 for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
1127 sp = ha->outstanding_cmds[cnt];
1129 ha->outstanding_cmds[cnt] = NULL;
1131 sp->cmd->result = res;
1132 sp->cmd->host_scribble = (unsigned char *)NULL;
1133 qla2x00_sp_compl(ha, sp);
1136 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1140 qla2xxx_slave_alloc(struct scsi_device *sdev)
1142 struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
1144 if (!rport || fc_remote_port_chkready(rport))
1147 sdev->hostdata = *(fc_port_t **)rport->dd_data;
1153 qla2xxx_slave_configure(struct scsi_device *sdev)
1155 scsi_qla_host_t *ha = shost_priv(sdev->host);
1156 struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
1158 if (sdev->tagged_supported)
1159 scsi_activate_tcq(sdev, ha->max_q_depth);
1161 scsi_deactivate_tcq(sdev, ha->max_q_depth);
1163 rport->dev_loss_tmo = ha->port_down_retry_count + 5;
1169 qla2xxx_slave_destroy(struct scsi_device *sdev)
1171 sdev->hostdata = NULL;
1175 qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth)
1177 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
1178 return sdev->queue_depth;
1182 qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
1184 if (sdev->tagged_supported) {
1185 scsi_set_tag_type(sdev, tag_type);
1187 scsi_activate_tcq(sdev, sdev->queue_depth);
1189 scsi_deactivate_tcq(sdev, sdev->queue_depth);
1197 * qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
1200 * At exit, the @ha's flags.enable_64bit_addressing set to indicated
1201 * supported addressing method.
1204 qla2x00_config_dma_addressing(scsi_qla_host_t *ha)
1206 /* Assume a 32bit DMA mask. */
1207 ha->flags.enable_64bit_addressing = 0;
1209 if (!dma_set_mask(&ha->pdev->dev, DMA_64BIT_MASK)) {
1210 /* Any upper-dword bits set? */
1211 if (MSD(dma_get_required_mask(&ha->pdev->dev)) &&
1212 !pci_set_consistent_dma_mask(ha->pdev, DMA_64BIT_MASK)) {
1213 /* Ok, a 64bit DMA mask is applicable. */
1214 ha->flags.enable_64bit_addressing = 1;
1215 ha->isp_ops->calc_req_entries = qla2x00_calc_iocbs_64;
1216 ha->isp_ops->build_iocbs = qla2x00_build_scsi_iocbs_64;
1221 dma_set_mask(&ha->pdev->dev, DMA_32BIT_MASK);
1222 pci_set_consistent_dma_mask(ha->pdev, DMA_32BIT_MASK);
1226 qla2x00_enable_intrs(scsi_qla_host_t *ha)
1228 unsigned long flags = 0;
1229 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1231 spin_lock_irqsave(&ha->hardware_lock, flags);
1232 ha->interrupts_on = 1;
1233 /* enable risc and host interrupts */
1234 WRT_REG_WORD(®->ictrl, ICR_EN_INT | ICR_EN_RISC);
1235 RD_REG_WORD(®->ictrl);
1236 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1241 qla2x00_disable_intrs(scsi_qla_host_t *ha)
1243 unsigned long flags = 0;
1244 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1246 spin_lock_irqsave(&ha->hardware_lock, flags);
1247 ha->interrupts_on = 0;
1248 /* disable risc and host interrupts */
1249 WRT_REG_WORD(®->ictrl, 0);
1250 RD_REG_WORD(®->ictrl);
1251 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1255 qla24xx_enable_intrs(scsi_qla_host_t *ha)
1257 unsigned long flags = 0;
1258 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1260 spin_lock_irqsave(&ha->hardware_lock, flags);
1261 ha->interrupts_on = 1;
1262 WRT_REG_DWORD(®->ictrl, ICRX_EN_RISC_INT);
1263 RD_REG_DWORD(®->ictrl);
1264 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1268 qla24xx_disable_intrs(scsi_qla_host_t *ha)
1270 unsigned long flags = 0;
1271 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1273 spin_lock_irqsave(&ha->hardware_lock, flags);
1274 ha->interrupts_on = 0;
1275 WRT_REG_DWORD(®->ictrl, 0);
1276 RD_REG_DWORD(®->ictrl);
1277 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1280 static struct isp_operations qla2100_isp_ops = {
1281 .pci_config = qla2100_pci_config,
1282 .reset_chip = qla2x00_reset_chip,
1283 .chip_diag = qla2x00_chip_diag,
1284 .config_rings = qla2x00_config_rings,
1285 .reset_adapter = qla2x00_reset_adapter,
1286 .nvram_config = qla2x00_nvram_config,
1287 .update_fw_options = qla2x00_update_fw_options,
1288 .load_risc = qla2x00_load_risc,
1289 .pci_info_str = qla2x00_pci_info_str,
1290 .fw_version_str = qla2x00_fw_version_str,
1291 .intr_handler = qla2100_intr_handler,
1292 .enable_intrs = qla2x00_enable_intrs,
1293 .disable_intrs = qla2x00_disable_intrs,
1294 .abort_command = qla2x00_abort_command,
1295 .abort_target = qla2x00_abort_target,
1296 .fabric_login = qla2x00_login_fabric,
1297 .fabric_logout = qla2x00_fabric_logout,
1298 .calc_req_entries = qla2x00_calc_iocbs_32,
1299 .build_iocbs = qla2x00_build_scsi_iocbs_32,
1300 .prep_ms_iocb = qla2x00_prep_ms_iocb,
1301 .prep_ms_fdmi_iocb = qla2x00_prep_ms_fdmi_iocb,
1302 .read_nvram = qla2x00_read_nvram_data,
1303 .write_nvram = qla2x00_write_nvram_data,
1304 .fw_dump = qla2100_fw_dump,
1307 .beacon_blink = NULL,
1308 .read_optrom = qla2x00_read_optrom_data,
1309 .write_optrom = qla2x00_write_optrom_data,
1310 .get_flash_version = qla2x00_get_flash_version,
1313 static struct isp_operations qla2300_isp_ops = {
1314 .pci_config = qla2300_pci_config,
1315 .reset_chip = qla2x00_reset_chip,
1316 .chip_diag = qla2x00_chip_diag,
1317 .config_rings = qla2x00_config_rings,
1318 .reset_adapter = qla2x00_reset_adapter,
1319 .nvram_config = qla2x00_nvram_config,
1320 .update_fw_options = qla2x00_update_fw_options,
1321 .load_risc = qla2x00_load_risc,
1322 .pci_info_str = qla2x00_pci_info_str,
1323 .fw_version_str = qla2x00_fw_version_str,
1324 .intr_handler = qla2300_intr_handler,
1325 .enable_intrs = qla2x00_enable_intrs,
1326 .disable_intrs = qla2x00_disable_intrs,
1327 .abort_command = qla2x00_abort_command,
1328 .abort_target = qla2x00_abort_target,
1329 .fabric_login = qla2x00_login_fabric,
1330 .fabric_logout = qla2x00_fabric_logout,
1331 .calc_req_entries = qla2x00_calc_iocbs_32,
1332 .build_iocbs = qla2x00_build_scsi_iocbs_32,
1333 .prep_ms_iocb = qla2x00_prep_ms_iocb,
1334 .prep_ms_fdmi_iocb = qla2x00_prep_ms_fdmi_iocb,
1335 .read_nvram = qla2x00_read_nvram_data,
1336 .write_nvram = qla2x00_write_nvram_data,
1337 .fw_dump = qla2300_fw_dump,
1338 .beacon_on = qla2x00_beacon_on,
1339 .beacon_off = qla2x00_beacon_off,
1340 .beacon_blink = qla2x00_beacon_blink,
1341 .read_optrom = qla2x00_read_optrom_data,
1342 .write_optrom = qla2x00_write_optrom_data,
1343 .get_flash_version = qla2x00_get_flash_version,
1346 static struct isp_operations qla24xx_isp_ops = {
1347 .pci_config = qla24xx_pci_config,
1348 .reset_chip = qla24xx_reset_chip,
1349 .chip_diag = qla24xx_chip_diag,
1350 .config_rings = qla24xx_config_rings,
1351 .reset_adapter = qla24xx_reset_adapter,
1352 .nvram_config = qla24xx_nvram_config,
1353 .update_fw_options = qla24xx_update_fw_options,
1354 .load_risc = qla24xx_load_risc,
1355 .pci_info_str = qla24xx_pci_info_str,
1356 .fw_version_str = qla24xx_fw_version_str,
1357 .intr_handler = qla24xx_intr_handler,
1358 .enable_intrs = qla24xx_enable_intrs,
1359 .disable_intrs = qla24xx_disable_intrs,
1360 .abort_command = qla24xx_abort_command,
1361 .abort_target = qla24xx_abort_target,
1362 .fabric_login = qla24xx_login_fabric,
1363 .fabric_logout = qla24xx_fabric_logout,
1364 .calc_req_entries = NULL,
1365 .build_iocbs = NULL,
1366 .prep_ms_iocb = qla24xx_prep_ms_iocb,
1367 .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
1368 .read_nvram = qla24xx_read_nvram_data,
1369 .write_nvram = qla24xx_write_nvram_data,
1370 .fw_dump = qla24xx_fw_dump,
1371 .beacon_on = qla24xx_beacon_on,
1372 .beacon_off = qla24xx_beacon_off,
1373 .beacon_blink = qla24xx_beacon_blink,
1374 .read_optrom = qla24xx_read_optrom_data,
1375 .write_optrom = qla24xx_write_optrom_data,
1376 .get_flash_version = qla24xx_get_flash_version,
1379 static struct isp_operations qla25xx_isp_ops = {
1380 .pci_config = qla25xx_pci_config,
1381 .reset_chip = qla24xx_reset_chip,
1382 .chip_diag = qla24xx_chip_diag,
1383 .config_rings = qla24xx_config_rings,
1384 .reset_adapter = qla24xx_reset_adapter,
1385 .nvram_config = qla24xx_nvram_config,
1386 .update_fw_options = qla24xx_update_fw_options,
1387 .load_risc = qla24xx_load_risc,
1388 .pci_info_str = qla24xx_pci_info_str,
1389 .fw_version_str = qla24xx_fw_version_str,
1390 .intr_handler = qla24xx_intr_handler,
1391 .enable_intrs = qla24xx_enable_intrs,
1392 .disable_intrs = qla24xx_disable_intrs,
1393 .abort_command = qla24xx_abort_command,
1394 .abort_target = qla24xx_abort_target,
1395 .fabric_login = qla24xx_login_fabric,
1396 .fabric_logout = qla24xx_fabric_logout,
1397 .calc_req_entries = NULL,
1398 .build_iocbs = NULL,
1399 .prep_ms_iocb = qla24xx_prep_ms_iocb,
1400 .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb,
1401 .read_nvram = qla25xx_read_nvram_data,
1402 .write_nvram = qla25xx_write_nvram_data,
1403 .fw_dump = qla25xx_fw_dump,
1404 .beacon_on = qla24xx_beacon_on,
1405 .beacon_off = qla24xx_beacon_off,
1406 .beacon_blink = qla24xx_beacon_blink,
1407 .read_optrom = qla25xx_read_optrom_data,
1408 .write_optrom = qla24xx_write_optrom_data,
1409 .get_flash_version = qla24xx_get_flash_version,
1413 qla2x00_set_isp_flags(scsi_qla_host_t *ha)
1415 ha->device_type = DT_EXTENDED_IDS;
1416 switch (ha->pdev->device) {
1417 case PCI_DEVICE_ID_QLOGIC_ISP2100:
1418 ha->device_type |= DT_ISP2100;
1419 ha->device_type &= ~DT_EXTENDED_IDS;
1420 ha->fw_srisc_address = RISC_START_ADDRESS_2100;
1422 case PCI_DEVICE_ID_QLOGIC_ISP2200:
1423 ha->device_type |= DT_ISP2200;
1424 ha->device_type &= ~DT_EXTENDED_IDS;
1425 ha->fw_srisc_address = RISC_START_ADDRESS_2100;
1427 case PCI_DEVICE_ID_QLOGIC_ISP2300:
1428 ha->device_type |= DT_ISP2300;
1429 ha->device_type |= DT_ZIO_SUPPORTED;
1430 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1432 case PCI_DEVICE_ID_QLOGIC_ISP2312:
1433 ha->device_type |= DT_ISP2312;
1434 ha->device_type |= DT_ZIO_SUPPORTED;
1435 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1437 case PCI_DEVICE_ID_QLOGIC_ISP2322:
1438 ha->device_type |= DT_ISP2322;
1439 ha->device_type |= DT_ZIO_SUPPORTED;
1440 if (ha->pdev->subsystem_vendor == 0x1028 &&
1441 ha->pdev->subsystem_device == 0x0170)
1442 ha->device_type |= DT_OEM_001;
1443 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1445 case PCI_DEVICE_ID_QLOGIC_ISP6312:
1446 ha->device_type |= DT_ISP6312;
1447 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1449 case PCI_DEVICE_ID_QLOGIC_ISP6322:
1450 ha->device_type |= DT_ISP6322;
1451 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1453 case PCI_DEVICE_ID_QLOGIC_ISP2422:
1454 ha->device_type |= DT_ISP2422;
1455 ha->device_type |= DT_ZIO_SUPPORTED;
1456 ha->device_type |= DT_FWI2;
1457 ha->device_type |= DT_IIDMA;
1458 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1460 case PCI_DEVICE_ID_QLOGIC_ISP2432:
1461 ha->device_type |= DT_ISP2432;
1462 ha->device_type |= DT_ZIO_SUPPORTED;
1463 ha->device_type |= DT_FWI2;
1464 ha->device_type |= DT_IIDMA;
1465 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1467 case PCI_DEVICE_ID_QLOGIC_ISP5422:
1468 ha->device_type |= DT_ISP5422;
1469 ha->device_type |= DT_FWI2;
1470 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1472 case PCI_DEVICE_ID_QLOGIC_ISP5432:
1473 ha->device_type |= DT_ISP5432;
1474 ha->device_type |= DT_FWI2;
1475 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1477 case PCI_DEVICE_ID_QLOGIC_ISP2532:
1478 ha->device_type |= DT_ISP2532;
1479 ha->device_type |= DT_ZIO_SUPPORTED;
1480 ha->device_type |= DT_FWI2;
1481 ha->device_type |= DT_IIDMA;
1482 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1488 qla2x00_iospace_config(scsi_qla_host_t *ha)
1490 resource_size_t pio;
1492 if (pci_request_selected_regions(ha->pdev, ha->bars,
1493 QLA2XXX_DRIVER_NAME)) {
1494 qla_printk(KERN_WARNING, ha,
1495 "Failed to reserve PIO/MMIO regions (%s)\n",
1496 pci_name(ha->pdev));
1498 goto iospace_error_exit;
1500 if (!(ha->bars & 1))
1503 /* We only need PIO for Flash operations on ISP2312 v2 chips. */
1504 pio = pci_resource_start(ha->pdev, 0);
1505 if (pci_resource_flags(ha->pdev, 0) & IORESOURCE_IO) {
1506 if (pci_resource_len(ha->pdev, 0) < MIN_IOBASE_LEN) {
1507 qla_printk(KERN_WARNING, ha,
1508 "Invalid PCI I/O region size (%s)...\n",
1509 pci_name(ha->pdev));
1513 qla_printk(KERN_WARNING, ha,
1514 "region #0 not a PIO resource (%s)...\n",
1515 pci_name(ha->pdev));
1518 ha->pio_address = pio;
1521 /* Use MMIO operations for all accesses. */
1522 if (!(pci_resource_flags(ha->pdev, 1) & IORESOURCE_MEM)) {
1523 qla_printk(KERN_ERR, ha,
1524 "region #1 not an MMIO resource (%s), aborting\n",
1525 pci_name(ha->pdev));
1526 goto iospace_error_exit;
1528 if (pci_resource_len(ha->pdev, 1) < MIN_IOBASE_LEN) {
1529 qla_printk(KERN_ERR, ha,
1530 "Invalid PCI mem region size (%s), aborting\n",
1531 pci_name(ha->pdev));
1532 goto iospace_error_exit;
1535 ha->iobase = ioremap(pci_resource_start(ha->pdev, 1), MIN_IOBASE_LEN);
1537 qla_printk(KERN_ERR, ha,
1538 "cannot remap MMIO (%s), aborting\n", pci_name(ha->pdev));
1540 goto iospace_error_exit;
1550 qla2xxx_scan_start(struct Scsi_Host *shost)
1552 scsi_qla_host_t *ha = shost_priv(shost);
1554 set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
1555 set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
1556 set_bit(RSCN_UPDATE, &ha->dpc_flags);
1560 qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time)
1562 scsi_qla_host_t *ha = shost_priv(shost);
1566 if (time > ha->loop_reset_delay * HZ)
1569 return atomic_read(&ha->loop_state) == LOOP_READY;
1573 * PCI driver interface
1575 static int __devinit
1576 qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
1579 device_reg_t __iomem *reg;
1580 struct Scsi_Host *host;
1581 scsi_qla_host_t *ha;
1582 unsigned long flags = 0;
1585 struct scsi_host_template *sht;
1586 int bars, mem_only = 0;
1588 bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
1589 sht = &qla2x00_driver_template;
1590 if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
1591 pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 ||
1592 pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 ||
1593 pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432 ||
1594 pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532) {
1595 bars = pci_select_bars(pdev, IORESOURCE_MEM);
1596 sht = &qla24xx_driver_template;
1601 if (pci_enable_device_mem(pdev))
1604 if (pci_enable_device(pdev))
1608 if (pci_find_aer_capability(pdev))
1609 if (pci_enable_pcie_error_reporting(pdev))
1612 host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
1615 "qla2xxx: Couldn't allocate host from scsi layer!\n");
1616 goto probe_disable_device;
1619 /* Clear our data area */
1620 ha = shost_priv(host);
1621 memset(ha, 0, sizeof(scsi_qla_host_t));
1625 ha->host_no = host->host_no;
1626 sprintf(ha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, ha->host_no);
1629 ha->mem_only = mem_only;
1630 spin_lock_init(&ha->hardware_lock);
1632 /* Set ISP-type information. */
1633 qla2x00_set_isp_flags(ha);
1635 /* Configure PCI I/O space */
1636 ret = qla2x00_iospace_config(ha);
1640 qla_printk(KERN_INFO, ha,
1641 "Found an ISP%04X, irq %d, iobase 0x%p\n", pdev->device, pdev->irq,
1644 ha->prev_topology = 0;
1645 ha->init_cb_size = sizeof(init_cb_t);
1646 ha->mgmt_svr_loop_id = MANAGEMENT_SERVER + ha->vp_idx;
1647 ha->link_data_rate = PORT_SPEED_UNKNOWN;
1648 ha->optrom_size = OPTROM_SIZE_2300;
1650 ha->max_q_depth = MAX_Q_DEPTH;
1651 if (ql2xmaxqdepth != 0 && ql2xmaxqdepth <= 0xffffU)
1652 ha->max_q_depth = ql2xmaxqdepth;
1654 /* Assign ISP specific operations. */
1655 if (IS_QLA2100(ha)) {
1656 host->max_id = MAX_TARGETS_2100;
1657 ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
1658 ha->request_q_length = REQUEST_ENTRY_CNT_2100;
1659 ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
1660 ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
1661 host->sg_tablesize = 32;
1662 ha->gid_list_info_size = 4;
1663 ha->isp_ops = &qla2100_isp_ops;
1664 } else if (IS_QLA2200(ha)) {
1665 host->max_id = MAX_TARGETS_2200;
1666 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1667 ha->request_q_length = REQUEST_ENTRY_CNT_2200;
1668 ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
1669 ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
1670 ha->gid_list_info_size = 4;
1671 ha->isp_ops = &qla2100_isp_ops;
1672 } else if (IS_QLA23XX(ha)) {
1673 host->max_id = MAX_TARGETS_2200;
1674 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1675 ha->request_q_length = REQUEST_ENTRY_CNT_2200;
1676 ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
1677 ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
1678 ha->gid_list_info_size = 6;
1679 if (IS_QLA2322(ha) || IS_QLA6322(ha))
1680 ha->optrom_size = OPTROM_SIZE_2322;
1681 ha->isp_ops = &qla2300_isp_ops;
1682 } else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
1683 host->max_id = MAX_TARGETS_2200;
1684 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1685 ha->request_q_length = REQUEST_ENTRY_CNT_24XX;
1686 ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
1687 ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
1688 ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
1689 ha->mgmt_svr_loop_id = 10 + ha->vp_idx;
1690 ha->gid_list_info_size = 8;
1691 ha->optrom_size = OPTROM_SIZE_24XX;
1692 ha->isp_ops = &qla24xx_isp_ops;
1693 } else if (IS_QLA25XX(ha)) {
1694 host->max_id = MAX_TARGETS_2200;
1695 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1696 ha->request_q_length = REQUEST_ENTRY_CNT_24XX;
1697 ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
1698 ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
1699 ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
1700 ha->mgmt_svr_loop_id = 10 + ha->vp_idx;
1701 ha->gid_list_info_size = 8;
1702 ha->optrom_size = OPTROM_SIZE_25XX;
1703 ha->isp_ops = &qla25xx_isp_ops;
1705 host->can_queue = ha->request_q_length + 128;
1707 /* load the F/W, read paramaters, and init the H/W */
1708 ha->instance = num_hosts;
1710 init_MUTEX(&ha->vport_sem);
1711 init_completion(&ha->mbx_cmd_comp);
1712 complete(&ha->mbx_cmd_comp);
1713 init_completion(&ha->mbx_intr_comp);
1715 INIT_LIST_HEAD(&ha->list);
1716 INIT_LIST_HEAD(&ha->fcports);
1717 INIT_LIST_HEAD(&ha->vp_list);
1719 set_bit(0, (unsigned long *) ha->vp_idx_map);
1721 qla2x00_config_dma_addressing(ha);
1722 if (qla2x00_mem_alloc(ha)) {
1723 qla_printk(KERN_WARNING, ha,
1724 "[ERROR] Failed to allocate memory for adapter\n");
1730 if (qla2x00_initialize_adapter(ha)) {
1731 qla_printk(KERN_WARNING, ha,
1732 "Failed to initialize adapter\n");
1734 DEBUG2(printk("scsi(%ld): Failed to initialize adapter - "
1735 "Adapter flags %x.\n",
1736 ha->host_no, ha->device_flags));
1743 * Startup the kernel thread for this host adapter
1745 ha->dpc_thread = kthread_create(qla2x00_do_dpc, ha,
1746 "%s_dpc", ha->host_str);
1747 if (IS_ERR(ha->dpc_thread)) {
1748 qla_printk(KERN_WARNING, ha,
1749 "Unable to start DPC thread!\n");
1750 ret = PTR_ERR(ha->dpc_thread);
1754 host->this_id = 255;
1755 host->cmd_per_lun = 3;
1756 host->unique_id = ha->instance;
1757 host->max_cmd_len = MAX_CMDSZ;
1758 host->max_channel = MAX_BUSES - 1;
1759 host->max_lun = MAX_LUNS;
1760 host->transportt = qla2xxx_transport_template;
1762 ret = qla2x00_request_irqs(ha);
1766 /* Initialized the timer */
1767 qla2x00_start_timer(ha, qla2x00_timer, WATCH_INTERVAL);
1769 DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n",
1772 ha->isp_ops->disable_intrs(ha);
1774 spin_lock_irqsave(&ha->hardware_lock, flags);
1776 if (IS_FWI2_CAPABLE(ha)) {
1777 WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_HOST_INT);
1778 WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_RISC_INT);
1780 WRT_REG_WORD(®->isp.semaphore, 0);
1781 WRT_REG_WORD(®->isp.hccr, HCCR_CLR_RISC_INT);
1782 WRT_REG_WORD(®->isp.hccr, HCCR_CLR_HOST_INT);
1784 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1786 ha->isp_ops->enable_intrs(ha);
1788 pci_set_drvdata(pdev, ha);
1790 ha->flags.init_done = 1;
1791 ha->flags.online = 1;
1795 ret = scsi_add_host(host, &pdev->dev);
1799 scsi_scan_host(host);
1801 qla2x00_alloc_sysfs_attr(ha);
1803 qla2x00_init_host_attr(ha);
1805 qla2x00_dfs_setup(ha);
1807 qla_printk(KERN_INFO, ha, "\n"
1808 " QLogic Fibre Channel HBA Driver: %s\n"
1810 " ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n",
1811 qla2x00_version_str, ha->model_number,
1812 ha->model_desc ? ha->model_desc: "", pdev->device,
1813 ha->isp_ops->pci_info_str(ha, pci_info), pci_name(pdev),
1814 ha->flags.enable_64bit_addressing ? '+': '-', ha->host_no,
1815 ha->isp_ops->fw_version_str(ha, fw_str));
1820 qla2x00_free_device(ha);
1822 scsi_host_put(host);
1824 probe_disable_device:
1825 pci_disable_device(pdev);
1832 qla2x00_remove_one(struct pci_dev *pdev)
1834 scsi_qla_host_t *ha;
1836 ha = pci_get_drvdata(pdev);
1838 qla2x00_dfs_remove(ha);
1840 qla2x00_free_sysfs_attr(ha);
1842 fc_remove_host(ha->host);
1844 scsi_remove_host(ha->host);
1846 qla2x00_free_device(ha);
1848 scsi_host_put(ha->host);
1850 pci_disable_device(pdev);
1851 pci_set_drvdata(pdev, NULL);
1855 qla2x00_free_device(scsi_qla_host_t *ha)
1857 qla2x00_abort_all_cmds(ha, DID_NO_CONNECT << 16);
1860 if (ha->timer_active)
1861 qla2x00_stop_timer(ha);
1863 ha->flags.online = 0;
1865 /* Kill the kernel thread for this host */
1866 if (ha->dpc_thread) {
1867 struct task_struct *t = ha->dpc_thread;
1870 * qla2xxx_wake_dpc checks for ->dpc_thread
1871 * so we need to zero it out.
1873 ha->dpc_thread = NULL;
1877 if (ha->flags.fce_enabled)
1878 qla2x00_disable_fce_trace(ha, NULL, NULL);
1881 qla2x00_disable_eft_trace(ha);
1883 /* Stop currently executing firmware. */
1884 qla2x00_try_to_stop_firmware(ha);
1886 /* turn-off interrupts on the card */
1887 if (ha->interrupts_on)
1888 ha->isp_ops->disable_intrs(ha);
1890 qla2x00_mem_free(ha);
1892 qla2x00_free_irqs(ha);
1894 /* release io space registers */
1896 iounmap(ha->iobase);
1897 pci_release_selected_regions(ha->pdev, ha->bars);
1901 qla2x00_schedule_rport_del(struct scsi_qla_host *ha, fc_port_t *fcport,
1904 unsigned long flags;
1905 struct fc_rport *rport;
1910 rport = fcport->rport;
1912 spin_lock_irqsave(&fcport->rport_lock, flags);
1913 fcport->drport = rport;
1914 fcport->rport = NULL;
1915 *(fc_port_t **)rport->dd_data = NULL;
1916 spin_unlock_irqrestore(&fcport->rport_lock, flags);
1917 set_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags);
1919 spin_lock_irqsave(&fcport->rport_lock, flags);
1920 fcport->rport = NULL;
1921 *(fc_port_t **)rport->dd_data = NULL;
1922 spin_unlock_irqrestore(&fcport->rport_lock, flags);
1923 fc_remote_port_delete(rport);
1928 * qla2x00_mark_device_lost Updates fcport state when device goes offline.
1930 * Input: ha = adapter block pointer. fcport = port structure pointer.
1936 void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport,
1937 int do_login, int defer)
1939 if (atomic_read(&fcport->state) == FCS_ONLINE &&
1940 ha->vp_idx == fcport->vp_idx)
1941 qla2x00_schedule_rport_del(ha, fcport, defer);
1944 * We may need to retry the login, so don't change the state of the
1945 * port but do the retries.
1947 if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD)
1948 atomic_set(&fcport->state, FCS_DEVICE_LOST);
1953 if (fcport->login_retry == 0) {
1954 fcport->login_retry = ha->login_retry_count;
1955 set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
1957 DEBUG(printk("scsi(%ld): Port login retry: "
1958 "%02x%02x%02x%02x%02x%02x%02x%02x, "
1959 "id = 0x%04x retry cnt=%d\n",
1961 fcport->port_name[0],
1962 fcport->port_name[1],
1963 fcport->port_name[2],
1964 fcport->port_name[3],
1965 fcport->port_name[4],
1966 fcport->port_name[5],
1967 fcport->port_name[6],
1968 fcport->port_name[7],
1970 fcport->login_retry));
1975 * qla2x00_mark_all_devices_lost
1976 * Updates fcport state when device goes offline.
1979 * ha = adapter block pointer.
1980 * fcport = port structure pointer.
1988 qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer)
1991 scsi_qla_host_t *pha = to_qla_parent(ha);
1993 list_for_each_entry(fcport, &pha->fcports, list) {
1994 if (ha->vp_idx != 0 && ha->vp_idx != fcport->vp_idx)
1997 * No point in marking the device as lost, if the device is
2000 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
2002 if (atomic_read(&fcport->state) == FCS_ONLINE) {
2004 qla2x00_schedule_rport_del(ha, fcport, defer);
2005 else if (ha->vp_idx == fcport->vp_idx)
2006 qla2x00_schedule_rport_del(ha, fcport, defer);
2008 atomic_set(&fcport->state, FCS_DEVICE_LOST);
2012 qla2xxx_wake_dpc(ha);
2017 * Allocates adapter memory.
2024 qla2x00_mem_alloc(scsi_qla_host_t *ha)
2028 ha->request_ring = dma_alloc_coherent(&ha->pdev->dev,
2029 (ha->request_q_length + 1) * sizeof(request_t), &ha->request_dma,
2031 if (!ha->request_ring)
2034 ha->response_ring = dma_alloc_coherent(&ha->pdev->dev,
2035 (ha->response_q_length + 1) * sizeof(response_t),
2036 &ha->response_dma, GFP_KERNEL);
2037 if (!ha->response_ring)
2038 goto fail_free_request_ring;
2040 ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE,
2041 &ha->gid_list_dma, GFP_KERNEL);
2043 goto fail_free_response_ring;
2045 ha->init_cb = dma_alloc_coherent(&ha->pdev->dev, ha->init_cb_size,
2046 &ha->init_cb_dma, GFP_KERNEL);
2048 goto fail_free_gid_list;
2050 snprintf(name, sizeof(name), "%s_%ld", QLA2XXX_DRIVER_NAME,
2052 ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev,
2053 DMA_POOL_SIZE, 8, 0);
2054 if (!ha->s_dma_pool)
2055 goto fail_free_init_cb;
2057 ha->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep);
2058 if (!ha->srb_mempool)
2059 goto fail_free_s_dma_pool;
2061 /* Get memory for cached NVRAM */
2062 ha->nvram = kzalloc(MAX_NVRAM_SIZE, GFP_KERNEL);
2064 goto fail_free_srb_mempool;
2066 /* Allocate memory for SNS commands */
2067 if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
2068 /* Get consistent memory allocated for SNS commands */
2069 ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev,
2070 sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma, GFP_KERNEL);
2072 goto fail_free_nvram;
2074 /* Get consistent memory allocated for MS IOCB */
2075 ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
2078 goto fail_free_nvram;
2080 /* Get consistent memory allocated for CT SNS commands */
2081 ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev,
2082 sizeof(struct ct_sns_pkt), &ha->ct_sns_dma, GFP_KERNEL);
2084 goto fail_free_ms_iocb;
2090 dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
2092 ha->ms_iocb_dma = 0;
2096 fail_free_srb_mempool:
2097 mempool_destroy(ha->srb_mempool);
2098 ha->srb_mempool = NULL;
2099 fail_free_s_dma_pool:
2100 dma_pool_destroy(ha->s_dma_pool);
2101 ha->s_dma_pool = NULL;
2103 dma_free_coherent(&ha->pdev->dev, ha->init_cb_size, ha->init_cb,
2106 ha->init_cb_dma = 0;
2108 dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
2110 ha->gid_list = NULL;
2111 ha->gid_list_dma = 0;
2112 fail_free_response_ring:
2113 dma_free_coherent(&ha->pdev->dev, (ha->response_q_length + 1) *
2114 sizeof(response_t), ha->response_ring, ha->response_dma);
2115 ha->response_ring = NULL;
2116 ha->response_dma = 0;
2117 fail_free_request_ring:
2118 dma_free_coherent(&ha->pdev->dev, (ha->request_q_length + 1) *
2119 sizeof(request_t), ha->request_ring, ha->request_dma);
2120 ha->request_ring = NULL;
2121 ha->request_dma = 0;
2128 * Frees all adapter allocated memory.
2131 * ha = adapter block pointer.
2134 qla2x00_mem_free(scsi_qla_host_t *ha)
2136 struct list_head *fcpl, *fcptemp;
2139 if (ha->srb_mempool)
2140 mempool_destroy(ha->srb_mempool);
2143 dma_free_coherent(&ha->pdev->dev, FCE_SIZE, ha->fce,
2148 dma_free_coherent(&ha->pdev->dev,
2149 ntohl(ha->fw_dump->eft_size), ha->eft, ha->eft_dma);
2154 dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
2155 ha->sns_cmd, ha->sns_cmd_dma);
2158 dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
2159 ha->ct_sns, ha->ct_sns_dma);
2162 dma_pool_free(ha->s_dma_pool, ha->sfp_data, ha->sfp_data_dma);
2165 dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
2168 dma_pool_destroy(ha->s_dma_pool);
2171 dma_free_coherent(&ha->pdev->dev, ha->init_cb_size,
2172 ha->init_cb, ha->init_cb_dma);
2175 dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
2178 if (ha->response_ring)
2179 dma_free_coherent(&ha->pdev->dev,
2180 (ha->response_q_length + 1) * sizeof(response_t),
2181 ha->response_ring, ha->response_dma);
2183 if (ha->request_ring)
2184 dma_free_coherent(&ha->pdev->dev,
2185 (ha->request_q_length + 1) * sizeof(request_t),
2186 ha->request_ring, ha->request_dma);
2188 ha->srb_mempool = NULL;
2192 ha->sns_cmd_dma = 0;
2196 ha->ms_iocb_dma = 0;
2198 ha->init_cb_dma = 0;
2200 ha->s_dma_pool = NULL;
2202 ha->gid_list = NULL;
2203 ha->gid_list_dma = 0;
2205 ha->response_ring = NULL;
2206 ha->response_dma = 0;
2207 ha->request_ring = NULL;
2208 ha->request_dma = 0;
2210 list_for_each_safe(fcpl, fcptemp, &ha->fcports) {
2211 fcport = list_entry(fcpl, fc_port_t, list);
2214 list_del_init(&fcport->list);
2217 INIT_LIST_HEAD(&ha->fcports);
2221 ha->fw_dump_reading = 0;
2223 vfree(ha->optrom_buffer);
2227 /**************************************************************************
2229 * This kernel thread is a task that is schedule by the interrupt handler
2230 * to perform the background processing for interrupts.
2233 * This task always run in the context of a kernel thread. It
2234 * is kick-off by the driver's detect code and starts up
2235 * up one per adapter. It immediately goes to sleep and waits for
2236 * some fibre event. When either the interrupt handler or
2237 * the timer routine detects a event it will one of the task
2238 * bits then wake us up.
2239 **************************************************************************/
2241 qla2x00_do_dpc(void *data)
2244 scsi_qla_host_t *ha;
2247 uint16_t next_loopid;
2249 ha = (scsi_qla_host_t *)data;
2251 set_user_nice(current, -20);
2253 while (!kthread_should_stop()) {
2254 DEBUG3(printk("qla2x00: DPC handler sleeping\n"));
2256 set_current_state(TASK_INTERRUPTIBLE);
2258 __set_current_state(TASK_RUNNING);
2260 DEBUG3(printk("qla2x00: DPC handler waking up\n"));
2262 /* Initialization not yet finished. Don't do anything yet. */
2263 if (!ha->flags.init_done)
2266 DEBUG3(printk("scsi(%ld): DPC handler\n", ha->host_no));
2270 if (ha->flags.mbox_busy) {
2275 if (test_and_clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) {
2277 DEBUG(printk("scsi(%ld): dpc: sched "
2278 "qla2x00_abort_isp ha = %p\n",
2280 if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
2283 if (qla2x00_abort_isp(ha)) {
2284 /* failed. retry later */
2285 set_bit(ISP_ABORT_NEEDED,
2288 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
2290 DEBUG(printk("scsi(%ld): dpc: qla2x00_abort_isp end\n",
2294 if (test_and_clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags))
2295 qla2x00_update_fcports(ha);
2297 if (test_and_clear_bit(LOOP_RESET_NEEDED, &ha->dpc_flags)) {
2298 DEBUG(printk("scsi(%ld): dpc: sched loop_reset()\n",
2300 qla2x00_loop_reset(ha);
2303 if (test_and_clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) &&
2304 (!(test_and_set_bit(RESET_ACTIVE, &ha->dpc_flags)))) {
2306 DEBUG(printk("scsi(%ld): qla2x00_reset_marker()\n",
2309 qla2x00_rst_aen(ha);
2310 clear_bit(RESET_ACTIVE, &ha->dpc_flags);
2313 /* Retry each device up to login retry count */
2314 if ((test_and_clear_bit(RELOGIN_NEEDED, &ha->dpc_flags)) &&
2315 !test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) &&
2316 atomic_read(&ha->loop_state) != LOOP_DOWN) {
2318 DEBUG(printk("scsi(%ld): qla2x00_port_login()\n",
2322 list_for_each_entry(fcport, &ha->fcports, list) {
2324 * If the port is not ONLINE then try to login
2325 * to it if we haven't run out of retries.
2327 if (atomic_read(&fcport->state) != FCS_ONLINE &&
2328 fcport->login_retry) {
2330 if (fcport->flags & FCF_FABRIC_DEVICE) {
2333 ha->isp_ops->fabric_logout(
2334 ha, fcport->loop_id,
2335 fcport->d_id.b.domain,
2336 fcport->d_id.b.area,
2337 fcport->d_id.b.al_pa);
2338 status = qla2x00_fabric_login(
2339 ha, fcport, &next_loopid);
2342 qla2x00_local_device_login(
2345 fcport->login_retry--;
2346 if (status == QLA_SUCCESS) {
2347 fcport->old_loop_id = fcport->loop_id;
2349 DEBUG(printk("scsi(%ld): port login OK: logged in ID 0x%x\n",
2350 ha->host_no, fcport->loop_id));
2352 qla2x00_update_fcport(ha,
2354 } else if (status == 1) {
2355 set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
2356 /* retry the login again */
2357 DEBUG(printk("scsi(%ld): Retrying %d login again loop_id 0x%x\n",
2359 fcport->login_retry, fcport->loop_id));
2361 fcport->login_retry = 0;
2363 if (fcport->login_retry == 0)
2364 fcport->loop_id = FC_NO_LOOP_ID;
2366 if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
2369 DEBUG(printk("scsi(%ld): qla2x00_port_login - end\n",
2373 if ((test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags)) &&
2374 atomic_read(&ha->loop_state) != LOOP_DOWN) {
2376 clear_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags);
2377 DEBUG(printk("scsi(%ld): qla2x00_login_retry()\n",
2380 set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
2382 DEBUG(printk("scsi(%ld): qla2x00_login_retry - end\n",
2386 if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
2388 DEBUG(printk("scsi(%ld): qla2x00_loop_resync()\n",
2391 if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE,
2394 rval = qla2x00_loop_resync(ha);
2396 clear_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags);
2399 DEBUG(printk("scsi(%ld): qla2x00_loop_resync - end\n",
2403 if (test_and_clear_bit(FCPORT_RESCAN_NEEDED, &ha->dpc_flags)) {
2405 DEBUG(printk("scsi(%ld): Rescan flagged fcports...\n",
2408 qla2x00_rescan_fcports(ha);
2410 DEBUG(printk("scsi(%ld): Rescan flagged fcports..."
2415 if (!ha->interrupts_on)
2416 ha->isp_ops->enable_intrs(ha);
2418 if (test_and_clear_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags))
2419 ha->isp_ops->beacon_blink(ha);
2421 qla2x00_do_dpc_all_vps(ha);
2424 } /* End of while(1) */
2426 DEBUG(printk("scsi(%ld): DPC handler exiting\n", ha->host_no));
2429 * Make sure that nobody tries to wake us up again.
2437 qla2xxx_wake_dpc(scsi_qla_host_t *ha)
2440 wake_up_process(ha->dpc_thread);
2445 * Processes asynchronous reset.
2448 * ha = adapter block pointer.
2451 qla2x00_rst_aen(scsi_qla_host_t *ha)
2453 if (ha->flags.online && !ha->flags.reset_active &&
2454 !atomic_read(&ha->loop_down_timer) &&
2455 !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) {
2457 clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
2460 * Issue marker command only when we are going to start
2463 ha->marker_needed = 1;
2464 } while (!atomic_read(&ha->loop_down_timer) &&
2465 (test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags)));
2470 qla2x00_sp_free_dma(scsi_qla_host_t *ha, srb_t *sp)
2472 struct scsi_cmnd *cmd = sp->cmd;
2474 if (sp->flags & SRB_DMA_VALID) {
2475 scsi_dma_unmap(cmd);
2476 sp->flags &= ~SRB_DMA_VALID;
2482 qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *sp)
2484 struct scsi_cmnd *cmd = sp->cmd;
2486 qla2x00_sp_free_dma(ha, sp);
2488 mempool_free(sp, ha->srb_mempool);
2490 cmd->scsi_done(cmd);
2493 /**************************************************************************
2499 * Context: Interrupt
2500 ***************************************************************************/
2502 qla2x00_timer(scsi_qla_host_t *ha)
2504 unsigned long cpu_flags = 0;
2510 scsi_qla_host_t *pha = to_qla_parent(ha);
2513 * Ports - Port down timer.
2515 * Whenever, a port is in the LOST state we start decrementing its port
2516 * down timer every second until it reaches zero. Once it reaches zero
2517 * the port it marked DEAD.
2520 list_for_each_entry(fcport, &ha->fcports, list) {
2521 if (fcport->port_type != FCT_TARGET)
2524 if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
2526 if (atomic_read(&fcport->port_down_timer) == 0)
2529 if (atomic_dec_and_test(&fcport->port_down_timer) != 0)
2530 atomic_set(&fcport->state, FCS_DEVICE_DEAD);
2532 DEBUG(printk("scsi(%ld): fcport-%d - port retry count: "
2535 t, atomic_read(&fcport->port_down_timer)));
2538 } /* End of for fcport */
2541 /* Loop down handler. */
2542 if (atomic_read(&ha->loop_down_timer) > 0 &&
2543 !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags)) && ha->flags.online) {
2545 if (atomic_read(&ha->loop_down_timer) ==
2546 ha->loop_down_abort_time) {
2548 DEBUG(printk("scsi(%ld): Loop Down - aborting the "
2549 "queues before time expire\n",
2552 if (!IS_QLA2100(ha) && ha->link_down_timeout)
2553 atomic_set(&ha->loop_state, LOOP_DEAD);
2555 /* Schedule an ISP abort to return any tape commands. */
2556 /* NPIV - scan physical port only */
2558 spin_lock_irqsave(&ha->hardware_lock,
2561 index < MAX_OUTSTANDING_COMMANDS;
2565 sp = ha->outstanding_cmds[index];
2569 if (!(sfcp->flags & FCF_TAPE_PRESENT))
2572 set_bit(ISP_ABORT_NEEDED,
2576 spin_unlock_irqrestore(&ha->hardware_lock,
2579 set_bit(ABORT_QUEUES_NEEDED, &ha->dpc_flags);
2583 /* if the loop has been down for 4 minutes, reinit adapter */
2584 if (atomic_dec_and_test(&ha->loop_down_timer) != 0) {
2585 DEBUG(printk("scsi(%ld): Loop down exceed 4 mins - "
2586 "restarting queues.\n",
2589 set_bit(RESTART_QUEUES_NEEDED, &ha->dpc_flags);
2592 if (!(ha->device_flags & DFLG_NO_CABLE)) {
2593 DEBUG(printk("scsi(%ld): Loop down - "
2596 qla_printk(KERN_WARNING, ha,
2597 "Loop down - aborting ISP.\n");
2599 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
2602 DEBUG3(printk("scsi(%ld): Loop Down - seconds remaining %d\n",
2604 atomic_read(&ha->loop_down_timer)));
2607 /* Check if beacon LED needs to be blinked */
2608 if (ha->beacon_blink_led == 1) {
2609 set_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags);
2613 /* Schedule the DPC routine if needed */
2614 if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) ||
2615 test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) ||
2616 test_bit(LOOP_RESET_NEEDED, &ha->dpc_flags) ||
2617 test_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags) ||
2619 test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) ||
2620 test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) ||
2621 test_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags) ||
2622 test_bit(VP_DPC_NEEDED, &ha->dpc_flags) ||
2623 test_bit(RELOGIN_NEEDED, &ha->dpc_flags)))
2624 qla2xxx_wake_dpc(pha);
2626 qla2x00_restart_timer(ha, WATCH_INTERVAL);
2629 /* Firmware interface routines. */
2632 #define FW_ISP21XX 0
2633 #define FW_ISP22XX 1
2634 #define FW_ISP2300 2
2635 #define FW_ISP2322 3
2636 #define FW_ISP24XX 4
2637 #define FW_ISP25XX 5
2639 #define FW_FILE_ISP21XX "ql2100_fw.bin"
2640 #define FW_FILE_ISP22XX "ql2200_fw.bin"
2641 #define FW_FILE_ISP2300 "ql2300_fw.bin"
2642 #define FW_FILE_ISP2322 "ql2322_fw.bin"
2643 #define FW_FILE_ISP24XX "ql2400_fw.bin"
2644 #define FW_FILE_ISP25XX "ql2500_fw.bin"
2646 static DECLARE_MUTEX(qla_fw_lock);
2648 static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
2649 { .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, },
2650 { .name = FW_FILE_ISP22XX, .segs = { 0x1000, 0 }, },
2651 { .name = FW_FILE_ISP2300, .segs = { 0x800, 0 }, },
2652 { .name = FW_FILE_ISP2322, .segs = { 0x800, 0x1c000, 0x1e000, 0 }, },
2653 { .name = FW_FILE_ISP24XX, },
2654 { .name = FW_FILE_ISP25XX, },
2658 qla2x00_request_firmware(scsi_qla_host_t *ha)
2660 struct fw_blob *blob;
2663 if (IS_QLA2100(ha)) {
2664 blob = &qla_fw_blobs[FW_ISP21XX];
2665 } else if (IS_QLA2200(ha)) {
2666 blob = &qla_fw_blobs[FW_ISP22XX];
2667 } else if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
2668 blob = &qla_fw_blobs[FW_ISP2300];
2669 } else if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
2670 blob = &qla_fw_blobs[FW_ISP2322];
2671 } else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
2672 blob = &qla_fw_blobs[FW_ISP24XX];
2673 } else if (IS_QLA25XX(ha)) {
2674 blob = &qla_fw_blobs[FW_ISP25XX];
2681 if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) {
2682 DEBUG2(printk("scsi(%ld): Failed to load firmware image "
2683 "(%s).\n", ha->host_no, blob->name));
2695 qla2x00_release_firmware(void)
2700 for (idx = 0; idx < FW_BLOBS; idx++)
2701 if (qla_fw_blobs[idx].fw)
2702 release_firmware(qla_fw_blobs[idx].fw);
2706 static pci_ers_result_t
2707 qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
2710 case pci_channel_io_normal:
2711 return PCI_ERS_RESULT_CAN_RECOVER;
2712 case pci_channel_io_frozen:
2713 pci_disable_device(pdev);
2714 return PCI_ERS_RESULT_NEED_RESET;
2715 case pci_channel_io_perm_failure:
2716 qla2x00_remove_one(pdev);
2717 return PCI_ERS_RESULT_DISCONNECT;
2719 return PCI_ERS_RESULT_NEED_RESET;
2722 static pci_ers_result_t
2723 qla2xxx_pci_mmio_enabled(struct pci_dev *pdev)
2725 int risc_paused = 0;
2727 unsigned long flags;
2728 scsi_qla_host_t *ha = pci_get_drvdata(pdev);
2729 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
2730 struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24;
2732 spin_lock_irqsave(&ha->hardware_lock, flags);
2733 if (IS_QLA2100(ha) || IS_QLA2200(ha)){
2734 stat = RD_REG_DWORD(®->hccr);
2735 if (stat & HCCR_RISC_PAUSE)
2737 } else if (IS_QLA23XX(ha)) {
2738 stat = RD_REG_DWORD(®->u.isp2300.host_status);
2739 if (stat & HSR_RISC_PAUSED)
2741 } else if (IS_FWI2_CAPABLE(ha)) {
2742 stat = RD_REG_DWORD(®24->host_status);
2743 if (stat & HSRX_RISC_PAUSED)
2746 spin_unlock_irqrestore(&ha->hardware_lock, flags);
2749 qla_printk(KERN_INFO, ha, "RISC paused -- mmio_enabled, "
2750 "Dumping firmware!\n");
2751 ha->isp_ops->fw_dump(ha, 0);
2753 return PCI_ERS_RESULT_NEED_RESET;
2755 return PCI_ERS_RESULT_RECOVERED;
2758 static pci_ers_result_t
2759 qla2xxx_pci_slot_reset(struct pci_dev *pdev)
2761 pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT;
2762 scsi_qla_host_t *ha = pci_get_drvdata(pdev);
2766 rc = pci_enable_device_mem(pdev);
2768 rc = pci_enable_device(pdev);
2771 qla_printk(KERN_WARNING, ha,
2772 "Can't re-enable PCI device after reset.\n");
2776 pci_set_master(pdev);
2778 if (ha->isp_ops->pci_config(ha))
2781 set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
2782 if (qla2x00_abort_isp(ha)== QLA_SUCCESS)
2783 ret = PCI_ERS_RESULT_RECOVERED;
2784 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
2790 qla2xxx_pci_resume(struct pci_dev *pdev)
2792 scsi_qla_host_t *ha = pci_get_drvdata(pdev);
2795 ret = qla2x00_wait_for_hba_online(ha);
2796 if (ret != QLA_SUCCESS) {
2797 qla_printk(KERN_ERR, ha,
2798 "the device failed to resume I/O "
2799 "from slot/link_reset");
2801 pci_cleanup_aer_uncorrect_error_status(pdev);
2804 static struct pci_error_handlers qla2xxx_err_handler = {
2805 .error_detected = qla2xxx_pci_error_detected,
2806 .mmio_enabled = qla2xxx_pci_mmio_enabled,
2807 .slot_reset = qla2xxx_pci_slot_reset,
2808 .resume = qla2xxx_pci_resume,
2811 static struct pci_device_id qla2xxx_pci_tbl[] = {
2812 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100) },
2813 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200) },
2814 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300) },
2815 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312) },
2816 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322) },
2817 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312) },
2818 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322) },
2819 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422) },
2820 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432) },
2821 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5422) },
2822 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) },
2823 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2532) },
2826 MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
2828 static struct pci_driver qla2xxx_pci_driver = {
2829 .name = QLA2XXX_DRIVER_NAME,
2831 .owner = THIS_MODULE,
2833 .id_table = qla2xxx_pci_tbl,
2834 .probe = qla2x00_probe_one,
2835 .remove = qla2x00_remove_one,
2836 .err_handler = &qla2xxx_err_handler,
2840 * qla2x00_module_init - Module initialization.
2843 qla2x00_module_init(void)
2847 /* Allocate cache for SRBs. */
2848 srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0,
2849 SLAB_HWCACHE_ALIGN, NULL);
2850 if (srb_cachep == NULL) {
2852 "qla2xxx: Unable to allocate SRB cache...Failing load!\n");
2856 /* Derive version string. */
2857 strcpy(qla2x00_version_str, QLA2XXX_VERSION);
2858 if (ql2xextended_error_logging)
2859 strcat(qla2x00_version_str, "-debug");
2861 qla2xxx_transport_template =
2862 fc_attach_transport(&qla2xxx_transport_functions);
2863 if (!qla2xxx_transport_template) {
2864 kmem_cache_destroy(srb_cachep);
2867 qla2xxx_transport_vport_template =
2868 fc_attach_transport(&qla2xxx_transport_vport_functions);
2869 if (!qla2xxx_transport_vport_template) {
2870 kmem_cache_destroy(srb_cachep);
2871 fc_release_transport(qla2xxx_transport_template);
2875 printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
2876 ret = pci_register_driver(&qla2xxx_pci_driver);
2878 kmem_cache_destroy(srb_cachep);
2879 fc_release_transport(qla2xxx_transport_template);
2880 fc_release_transport(qla2xxx_transport_vport_template);
2886 * qla2x00_module_exit - Module cleanup.
2889 qla2x00_module_exit(void)
2891 pci_unregister_driver(&qla2xxx_pci_driver);
2892 qla2x00_release_firmware();
2893 kmem_cache_destroy(srb_cachep);
2894 fc_release_transport(qla2xxx_transport_template);
2895 fc_release_transport(qla2xxx_transport_vport_template);
2898 module_init(qla2x00_module_init);
2899 module_exit(qla2x00_module_exit);
2901 MODULE_AUTHOR("QLogic Corporation");
2902 MODULE_DESCRIPTION("QLogic Fibre Channel HBA Driver");
2903 MODULE_LICENSE("GPL");
2904 MODULE_VERSION(QLA2XXX_VERSION);
2905 MODULE_FIRMWARE(FW_FILE_ISP21XX);
2906 MODULE_FIRMWARE(FW_FILE_ISP22XX);
2907 MODULE_FIRMWARE(FW_FILE_ISP2300);
2908 MODULE_FIRMWARE(FW_FILE_ISP2322);
2909 MODULE_FIRMWARE(FW_FILE_ISP24XX);
2910 MODULE_FIRMWARE(FW_FILE_ISP25XX);