err.no Git - linux-2.6/blob - drivers/scsi/libsas/sas_phy.c

   1 /*
   2  * Serial Attached SCSI (SAS) Phy class
   3  *
   4  * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
   5  * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
   6  *
   7  * This file is licensed under GPLv2.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of the
  12  * License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful, but
  15  * WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17  * General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  22  *
  23  */
  24
  25 #include "sas_internal.h"
  26 #include <scsi/scsi_host.h>
  27 #include <scsi/scsi_transport.h>
  28 #include <scsi/scsi_transport_sas.h>
  29 #include "../scsi_sas_internal.h"
  30
  31 /* ---------- Phy events ---------- */
  32
  33 static void sas_phye_loss_of_signal(void *data)
  34 {
  35         struct asd_sas_phy *phy = data;
  36
  37         sas_begin_event(PHYE_LOSS_OF_SIGNAL, &phy->ha->event_lock,
  38                         &phy->phy_events_pending);
  39         phy->error = 0;
  40         sas_deform_port(phy);
  41 }
  42
  43 static void sas_phye_oob_done(void *data)
  44 {
  45         struct asd_sas_phy *phy = data;
  46
  47         sas_begin_event(PHYE_OOB_DONE, &phy->ha->event_lock,
  48                         &phy->phy_events_pending);
  49         phy->error = 0;
  50 }
  51
  52 static void sas_phye_oob_error(void *data)
  53 {
  54         struct asd_sas_phy *phy = data;
  55         struct sas_ha_struct *sas_ha = phy->ha;
  56         struct asd_sas_port *port = phy->port;
  57         struct sas_internal *i =
  58                 to_sas_internal(sas_ha->core.shost->transportt);
  59
  60         sas_begin_event(PHYE_OOB_ERROR, &phy->ha->event_lock,
  61                         &phy->phy_events_pending);
  62
  63         sas_deform_port(phy);
  64
  65         if (!port && phy->enabled && i->dft->lldd_control_phy) {
  66                 phy->error++;
  67                 switch (phy->error) {
  68                 case 1:
  69                 case 2:
  70                         i->dft->lldd_control_phy(phy, PHY_FUNC_HARD_RESET);
  71                         break;
  72                 case 3:
  73                 default:
  74                         phy->error = 0;
  75                         phy->enabled = 0;
  76                         i->dft->lldd_control_phy(phy, PHY_FUNC_DISABLE);
  77                         break;
  78                 }
  79         }
  80 }
  81
  82 static void sas_phye_spinup_hold(void *data)
  83 {
  84         struct asd_sas_phy *phy = data;
  85         struct sas_ha_struct *sas_ha = phy->ha;
  86         struct sas_internal *i =
  87                 to_sas_internal(sas_ha->core.shost->transportt);
  88
  89         sas_begin_event(PHYE_SPINUP_HOLD, &phy->ha->event_lock,
  90                         &phy->phy_events_pending);
  91
  92         phy->error = 0;
  93         i->dft->lldd_control_phy(phy, PHY_FUNC_RELEASE_SPINUP_HOLD);
  94 }
  95
  96 /* ---------- Phy class registration ---------- */
  97
  98 int sas_register_phys(struct sas_ha_struct *sas_ha)
  99 {
 100         int i;
 101
 102         static void (*sas_phy_event_fns[PHY_NUM_EVENTS])(void *) = {
 103                 [PHYE_LOSS_OF_SIGNAL] = sas_phye_loss_of_signal,
 104                 [PHYE_OOB_DONE] = sas_phye_oob_done,
 105                 [PHYE_OOB_ERROR] = sas_phye_oob_error,
 106                 [PHYE_SPINUP_HOLD] = sas_phye_spinup_hold,
 107         };
 108
 109         static void (*sas_port_event_fns[PORT_NUM_EVENTS])(void *) = {
 110                 [PORTE_BYTES_DMAED] = sas_porte_bytes_dmaed,
 111                 [PORTE_BROADCAST_RCVD] = sas_porte_broadcast_rcvd,
 112                 [PORTE_LINK_RESET_ERR] = sas_porte_link_reset_err,
 113                 [PORTE_TIMER_EVENT] = sas_porte_timer_event,
 114                 [PORTE_HARD_RESET] = sas_porte_hard_reset,
 115         };
 116
 117         /* Now register the phys. */
 118         for (i = 0; i < sas_ha->num_phys; i++) {
 119                 int k;
 120                 struct asd_sas_phy *phy = sas_ha->sas_phy[i];
 121
 122                 phy->error = 0;
 123                 INIT_LIST_HEAD(&phy->port_phy_el);
 124                 for (k = 0; k < PORT_NUM_EVENTS; k++)
 125                         INIT_WORK(&phy->port_events[k], sas_port_event_fns[k],
 126                                   phy);
 127
 128                 for (k = 0; k < PHY_NUM_EVENTS; k++)
 129                         INIT_WORK(&phy->phy_events[k], sas_phy_event_fns[k],
 130                                   phy);
 131                 phy->port = NULL;
 132                 phy->ha = sas_ha;
 133                 spin_lock_init(&phy->frame_rcvd_lock);
 134                 spin_lock_init(&phy->sas_prim_lock);
 135                 phy->frame_rcvd_size = 0;
 136
 137                 phy->phy = sas_phy_alloc(&sas_ha->core.shost->shost_gendev,
 138                                          i);
 139                 if (!phy->phy)
 140                         return -ENOMEM;
 141
 142                 phy->phy->identify.initiator_port_protocols =
 143                         phy->iproto;
 144                 phy->phy->identify.target_port_protocols = phy->tproto;
 145                 phy->phy->identify.sas_address = SAS_ADDR(sas_ha->sas_addr);
 146                 phy->phy->identify.phy_identifier = i;
 147                 phy->phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
 148                 phy->phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
 149                 phy->phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
 150                 phy->phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
 151                 phy->phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
 152
 153                 sas_phy_add(phy->phy);
 154         }
 155
 156         return 0;
 157 }