2 * libata-core.c - helper library for ATA
4 * Maintained by: Jeff Garzik <jgarzik@pobox.com>
5 * Please ALWAYS copy linux-ide@vger.kernel.org
8 * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
9 * Copyright 2003-2004 Jeff Garzik
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2, or (at your option)
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; see the file COPYING. If not, write to
24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
27 * libata documentation is available via 'make {ps|pdf}docs',
28 * as Documentation/DocBook/libata.*
30 * Hardware documentation available from http://www.t13.org/ and
31 * http://www.sata-io.org/
35 #include <linux/config.h>
36 #include <linux/kernel.h>
37 #include <linux/module.h>
38 #include <linux/pci.h>
39 #include <linux/init.h>
40 #include <linux/list.h>
42 #include <linux/highmem.h>
43 #include <linux/spinlock.h>
44 #include <linux/blkdev.h>
45 #include <linux/delay.h>
46 #include <linux/timer.h>
47 #include <linux/interrupt.h>
48 #include <linux/completion.h>
49 #include <linux/suspend.h>
50 #include <linux/workqueue.h>
51 #include <linux/jiffies.h>
52 #include <linux/scatterlist.h>
53 #include <scsi/scsi.h>
54 #include "scsi_priv.h"
55 #include <scsi/scsi_cmnd.h>
56 #include <scsi/scsi_host.h>
57 #include <linux/libata.h>
59 #include <asm/semaphore.h>
60 #include <asm/byteorder.h>
64 static unsigned int ata_dev_init_params(struct ata_port *ap,
65 struct ata_device *dev);
66 static void ata_set_mode(struct ata_port *ap);
67 static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
68 struct ata_device *dev);
69 static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev);
71 static unsigned int ata_unique_id = 1;
72 static struct workqueue_struct *ata_wq;
74 int atapi_enabled = 1;
75 module_param(atapi_enabled, int, 0444);
76 MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
79 module_param_named(fua, libata_fua, int, 0444);
80 MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
82 MODULE_AUTHOR("Jeff Garzik");
83 MODULE_DESCRIPTION("Library module for ATA devices");
84 MODULE_LICENSE("GPL");
85 MODULE_VERSION(DRV_VERSION);
89 * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
90 * @tf: Taskfile to convert
91 * @fis: Buffer into which data will output
92 * @pmp: Port multiplier port
94 * Converts a standard ATA taskfile to a Serial ATA
95 * FIS structure (Register - Host to Device).
98 * Inherited from caller.
101 void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp)
103 fis[0] = 0x27; /* Register - Host to Device FIS */
104 fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number,
105 bit 7 indicates Command FIS */
106 fis[2] = tf->command;
107 fis[3] = tf->feature;
114 fis[8] = tf->hob_lbal;
115 fis[9] = tf->hob_lbam;
116 fis[10] = tf->hob_lbah;
117 fis[11] = tf->hob_feature;
120 fis[13] = tf->hob_nsect;
131 * ata_tf_from_fis - Convert SATA FIS to ATA taskfile
132 * @fis: Buffer from which data will be input
133 * @tf: Taskfile to output
135 * Converts a serial ATA FIS structure to a standard ATA taskfile.
138 * Inherited from caller.
141 void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
143 tf->command = fis[2]; /* status */
144 tf->feature = fis[3]; /* error */
151 tf->hob_lbal = fis[8];
152 tf->hob_lbam = fis[9];
153 tf->hob_lbah = fis[10];
156 tf->hob_nsect = fis[13];
159 static const u8 ata_rw_cmds[] = {
163 ATA_CMD_READ_MULTI_EXT,
164 ATA_CMD_WRITE_MULTI_EXT,
168 ATA_CMD_WRITE_MULTI_FUA_EXT,
172 ATA_CMD_PIO_READ_EXT,
173 ATA_CMD_PIO_WRITE_EXT,
186 ATA_CMD_WRITE_FUA_EXT
190 * ata_rwcmd_protocol - set taskfile r/w commands and protocol
191 * @qc: command to examine and configure
193 * Examine the device configuration and tf->flags to calculate
194 * the proper read/write commands and protocol to use.
199 int ata_rwcmd_protocol(struct ata_queued_cmd *qc)
201 struct ata_taskfile *tf = &qc->tf;
202 struct ata_device *dev = qc->dev;
205 int index, fua, lba48, write;
207 fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0;
208 lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0;
209 write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0;
211 if (dev->flags & ATA_DFLAG_PIO) {
212 tf->protocol = ATA_PROT_PIO;
213 index = dev->multi_count ? 0 : 8;
214 } else if (lba48 && (qc->ap->flags & ATA_FLAG_PIO_LBA48)) {
215 /* Unable to use DMA due to host limitation */
216 tf->protocol = ATA_PROT_PIO;
217 index = dev->multi_count ? 0 : 8;
219 tf->protocol = ATA_PROT_DMA;
223 cmd = ata_rw_cmds[index + fua + lba48 + write];
232 * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask
233 * @pio_mask: pio_mask
234 * @mwdma_mask: mwdma_mask
235 * @udma_mask: udma_mask
237 * Pack @pio_mask, @mwdma_mask and @udma_mask into a single
238 * unsigned int xfer_mask.
246 static unsigned int ata_pack_xfermask(unsigned int pio_mask,
247 unsigned int mwdma_mask,
248 unsigned int udma_mask)
250 return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) |
251 ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) |
252 ((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA);
256 * ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks
257 * @xfer_mask: xfer_mask to unpack
258 * @pio_mask: resulting pio_mask
259 * @mwdma_mask: resulting mwdma_mask
260 * @udma_mask: resulting udma_mask
262 * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask.
263 * Any NULL distination masks will be ignored.
265 static void ata_unpack_xfermask(unsigned int xfer_mask,
266 unsigned int *pio_mask,
267 unsigned int *mwdma_mask,
268 unsigned int *udma_mask)
271 *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO;
273 *mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA;
275 *udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA;
278 static const struct ata_xfer_ent {
279 unsigned int shift, bits;
282 { ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 },
283 { ATA_SHIFT_MWDMA, ATA_BITS_MWDMA, XFER_MW_DMA_0 },
284 { ATA_SHIFT_UDMA, ATA_BITS_UDMA, XFER_UDMA_0 },
289 * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask
290 * @xfer_mask: xfer_mask of interest
292 * Return matching XFER_* value for @xfer_mask. Only the highest
293 * bit of @xfer_mask is considered.
299 * Matching XFER_* value, 0 if no match found.
301 static u8 ata_xfer_mask2mode(unsigned int xfer_mask)
303 int highbit = fls(xfer_mask) - 1;
304 const struct ata_xfer_ent *ent;
306 for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
307 if (highbit >= ent->shift && highbit < ent->shift + ent->bits)
308 return ent->base + highbit - ent->shift;
313 * ata_xfer_mode2mask - Find matching xfer_mask for XFER_*
314 * @xfer_mode: XFER_* of interest
316 * Return matching xfer_mask for @xfer_mode.
322 * Matching xfer_mask, 0 if no match found.
324 static unsigned int ata_xfer_mode2mask(u8 xfer_mode)
326 const struct ata_xfer_ent *ent;
328 for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
329 if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits)
330 return 1 << (ent->shift + xfer_mode - ent->base);
335 * ata_xfer_mode2shift - Find matching xfer_shift for XFER_*
336 * @xfer_mode: XFER_* of interest
338 * Return matching xfer_shift for @xfer_mode.
344 * Matching xfer_shift, -1 if no match found.
346 static int ata_xfer_mode2shift(unsigned int xfer_mode)
348 const struct ata_xfer_ent *ent;
350 for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
351 if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits)
357 * ata_mode_string - convert xfer_mask to string
358 * @xfer_mask: mask of bits supported; only highest bit counts.
360 * Determine string which represents the highest speed
361 * (highest bit in @modemask).
367 * Constant C string representing highest speed listed in
368 * @mode_mask, or the constant C string "<n/a>".
370 static const char *ata_mode_string(unsigned int xfer_mask)
372 static const char * const xfer_mode_str[] = {
392 highbit = fls(xfer_mask) - 1;
393 if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str))
394 return xfer_mode_str[highbit];
398 static void ata_dev_disable(struct ata_port *ap, struct ata_device *dev)
400 if (ata_dev_present(dev)) {
401 printk(KERN_WARNING "ata%u: dev %u disabled\n",
408 * ata_pio_devchk - PATA device presence detection
409 * @ap: ATA channel to examine
410 * @device: Device to examine (starting at zero)
412 * This technique was originally described in
413 * Hale Landis's ATADRVR (www.ata-atapi.com), and
414 * later found its way into the ATA/ATAPI spec.
416 * Write a pattern to the ATA shadow registers,
417 * and if a device is present, it will respond by
418 * correctly storing and echoing back the
419 * ATA shadow register contents.
425 static unsigned int ata_pio_devchk(struct ata_port *ap,
428 struct ata_ioports *ioaddr = &ap->ioaddr;
431 ap->ops->dev_select(ap, device);
433 outb(0x55, ioaddr->nsect_addr);
434 outb(0xaa, ioaddr->lbal_addr);
436 outb(0xaa, ioaddr->nsect_addr);
437 outb(0x55, ioaddr->lbal_addr);
439 outb(0x55, ioaddr->nsect_addr);
440 outb(0xaa, ioaddr->lbal_addr);
442 nsect = inb(ioaddr->nsect_addr);
443 lbal = inb(ioaddr->lbal_addr);
445 if ((nsect == 0x55) && (lbal == 0xaa))
446 return 1; /* we found a device */
448 return 0; /* nothing found */
452 * ata_mmio_devchk - PATA device presence detection
453 * @ap: ATA channel to examine
454 * @device: Device to examine (starting at zero)
456 * This technique was originally described in
457 * Hale Landis's ATADRVR (www.ata-atapi.com), and
458 * later found its way into the ATA/ATAPI spec.
460 * Write a pattern to the ATA shadow registers,
461 * and if a device is present, it will respond by
462 * correctly storing and echoing back the
463 * ATA shadow register contents.
469 static unsigned int ata_mmio_devchk(struct ata_port *ap,
472 struct ata_ioports *ioaddr = &ap->ioaddr;
475 ap->ops->dev_select(ap, device);
477 writeb(0x55, (void __iomem *) ioaddr->nsect_addr);
478 writeb(0xaa, (void __iomem *) ioaddr->lbal_addr);
480 writeb(0xaa, (void __iomem *) ioaddr->nsect_addr);
481 writeb(0x55, (void __iomem *) ioaddr->lbal_addr);
483 writeb(0x55, (void __iomem *) ioaddr->nsect_addr);
484 writeb(0xaa, (void __iomem *) ioaddr->lbal_addr);
486 nsect = readb((void __iomem *) ioaddr->nsect_addr);
487 lbal = readb((void __iomem *) ioaddr->lbal_addr);
489 if ((nsect == 0x55) && (lbal == 0xaa))
490 return 1; /* we found a device */
492 return 0; /* nothing found */
496 * ata_devchk - PATA device presence detection
497 * @ap: ATA channel to examine
498 * @device: Device to examine (starting at zero)
500 * Dispatch ATA device presence detection, depending
501 * on whether we are using PIO or MMIO to talk to the
502 * ATA shadow registers.
508 static unsigned int ata_devchk(struct ata_port *ap,
511 if (ap->flags & ATA_FLAG_MMIO)
512 return ata_mmio_devchk(ap, device);
513 return ata_pio_devchk(ap, device);
517 * ata_dev_classify - determine device type based on ATA-spec signature
518 * @tf: ATA taskfile register set for device to be identified
520 * Determine from taskfile register contents whether a device is
521 * ATA or ATAPI, as per "Signature and persistence" section
522 * of ATA/PI spec (volume 1, sect 5.14).
528 * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, or %ATA_DEV_UNKNOWN
529 * the event of failure.
532 unsigned int ata_dev_classify(const struct ata_taskfile *tf)
534 /* Apple's open source Darwin code hints that some devices only
535 * put a proper signature into the LBA mid/high registers,
536 * So, we only check those. It's sufficient for uniqueness.
539 if (((tf->lbam == 0) && (tf->lbah == 0)) ||
540 ((tf->lbam == 0x3c) && (tf->lbah == 0xc3))) {
541 DPRINTK("found ATA device by sig\n");
545 if (((tf->lbam == 0x14) && (tf->lbah == 0xeb)) ||
546 ((tf->lbam == 0x69) && (tf->lbah == 0x96))) {
547 DPRINTK("found ATAPI device by sig\n");
548 return ATA_DEV_ATAPI;
551 DPRINTK("unknown device\n");
552 return ATA_DEV_UNKNOWN;
556 * ata_dev_try_classify - Parse returned ATA device signature
557 * @ap: ATA channel to examine
558 * @device: Device to examine (starting at zero)
559 * @r_err: Value of error register on completion
561 * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs,
562 * an ATA/ATAPI-defined set of values is placed in the ATA
563 * shadow registers, indicating the results of device detection
566 * Select the ATA device, and read the values from the ATA shadow
567 * registers. Then parse according to the Error register value,
568 * and the spec-defined values examined by ata_dev_classify().
574 * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE.
578 ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err)
580 struct ata_taskfile tf;
584 ap->ops->dev_select(ap, device);
586 memset(&tf, 0, sizeof(tf));
588 ap->ops->tf_read(ap, &tf);
593 /* see if device passed diags */
596 else if ((device == 0) && (err == 0x81))
601 /* determine if device is ATA or ATAPI */
602 class = ata_dev_classify(&tf);
604 if (class == ATA_DEV_UNKNOWN)
606 if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0))
612 * ata_id_string - Convert IDENTIFY DEVICE page into string
613 * @id: IDENTIFY DEVICE results we will examine
614 * @s: string into which data is output
615 * @ofs: offset into identify device page
616 * @len: length of string to return. must be an even number.
618 * The strings in the IDENTIFY DEVICE page are broken up into
619 * 16-bit chunks. Run through the string, and output each
620 * 8-bit chunk linearly, regardless of platform.
626 void ata_id_string(const u16 *id, unsigned char *s,
627 unsigned int ofs, unsigned int len)
646 * ata_id_c_string - Convert IDENTIFY DEVICE page into C string
647 * @id: IDENTIFY DEVICE results we will examine
648 * @s: string into which data is output
649 * @ofs: offset into identify device page
650 * @len: length of string to return. must be an odd number.
652 * This function is identical to ata_id_string except that it
653 * trims trailing spaces and terminates the resulting string with
654 * null. @len must be actual maximum length (even number) + 1.
659 void ata_id_c_string(const u16 *id, unsigned char *s,
660 unsigned int ofs, unsigned int len)
666 ata_id_string(id, s, ofs, len - 1);
668 p = s + strnlen(s, len - 1);
669 while (p > s && p[-1] == ' ')
674 static u64 ata_id_n_sectors(const u16 *id)
676 if (ata_id_has_lba(id)) {
677 if (ata_id_has_lba48(id))
678 return ata_id_u64(id, 100);
680 return ata_id_u32(id, 60);
682 if (ata_id_current_chs_valid(id))
683 return ata_id_u32(id, 57);
685 return id[1] * id[3] * id[6];
690 * ata_noop_dev_select - Select device 0/1 on ATA bus
691 * @ap: ATA channel to manipulate
692 * @device: ATA device (numbered from zero) to select
694 * This function performs no actual function.
696 * May be used as the dev_select() entry in ata_port_operations.
701 void ata_noop_dev_select (struct ata_port *ap, unsigned int device)
707 * ata_std_dev_select - Select device 0/1 on ATA bus
708 * @ap: ATA channel to manipulate
709 * @device: ATA device (numbered from zero) to select
711 * Use the method defined in the ATA specification to
712 * make either device 0, or device 1, active on the
713 * ATA channel. Works with both PIO and MMIO.
715 * May be used as the dev_select() entry in ata_port_operations.
721 void ata_std_dev_select (struct ata_port *ap, unsigned int device)
726 tmp = ATA_DEVICE_OBS;
728 tmp = ATA_DEVICE_OBS | ATA_DEV1;
730 if (ap->flags & ATA_FLAG_MMIO) {
731 writeb(tmp, (void __iomem *) ap->ioaddr.device_addr);
733 outb(tmp, ap->ioaddr.device_addr);
735 ata_pause(ap); /* needed; also flushes, for mmio */
739 * ata_dev_select - Select device 0/1 on ATA bus
740 * @ap: ATA channel to manipulate
741 * @device: ATA device (numbered from zero) to select
742 * @wait: non-zero to wait for Status register BSY bit to clear
743 * @can_sleep: non-zero if context allows sleeping
745 * Use the method defined in the ATA specification to
746 * make either device 0, or device 1, active on the
749 * This is a high-level version of ata_std_dev_select(),
750 * which additionally provides the services of inserting
751 * the proper pauses and status polling, where needed.
757 void ata_dev_select(struct ata_port *ap, unsigned int device,
758 unsigned int wait, unsigned int can_sleep)
760 VPRINTK("ENTER, ata%u: device %u, wait %u\n",
761 ap->id, device, wait);
766 ap->ops->dev_select(ap, device);
769 if (can_sleep && ap->device[device].class == ATA_DEV_ATAPI)
776 * ata_dump_id - IDENTIFY DEVICE info debugging output
777 * @id: IDENTIFY DEVICE page to dump
779 * Dump selected 16-bit words from the given IDENTIFY DEVICE
786 static inline void ata_dump_id(const u16 *id)
788 DPRINTK("49==0x%04x "
798 DPRINTK("80==0x%04x "
808 DPRINTK("88==0x%04x "
815 * ata_id_xfermask - Compute xfermask from the given IDENTIFY data
816 * @id: IDENTIFY data to compute xfer mask from
818 * Compute the xfermask for this device. This is not as trivial
819 * as it seems if we must consider early devices correctly.
821 * FIXME: pre IDE drive timing (do we care ?).
829 static unsigned int ata_id_xfermask(const u16 *id)
831 unsigned int pio_mask, mwdma_mask, udma_mask;
833 /* Usual case. Word 53 indicates word 64 is valid */
834 if (id[ATA_ID_FIELD_VALID] & (1 << 1)) {
835 pio_mask = id[ATA_ID_PIO_MODES] & 0x03;
839 /* If word 64 isn't valid then Word 51 high byte holds
840 * the PIO timing number for the maximum. Turn it into
843 pio_mask = (2 << (id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ;
845 /* But wait.. there's more. Design your standards by
846 * committee and you too can get a free iordy field to
847 * process. However its the speeds not the modes that
848 * are supported... Note drivers using the timing API
849 * will get this right anyway
853 mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07;
856 if (id[ATA_ID_FIELD_VALID] & (1 << 2))
857 udma_mask = id[ATA_ID_UDMA_MODES] & 0xff;
859 return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
863 * ata_port_queue_task - Queue port_task
864 * @ap: The ata_port to queue port_task for
866 * Schedule @fn(@data) for execution after @delay jiffies using
867 * port_task. There is one port_task per port and it's the
868 * user(low level driver)'s responsibility to make sure that only
869 * one task is active at any given time.
871 * libata core layer takes care of synchronization between
872 * port_task and EH. ata_port_queue_task() may be ignored for EH
876 * Inherited from caller.
878 void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), void *data,
883 if (ap->flags & ATA_FLAG_FLUSH_PORT_TASK)
886 PREPARE_WORK(&ap->port_task, fn, data);
889 rc = queue_work(ata_wq, &ap->port_task);
891 rc = queue_delayed_work(ata_wq, &ap->port_task, delay);
893 /* rc == 0 means that another user is using port task */
898 * ata_port_flush_task - Flush port_task
899 * @ap: The ata_port to flush port_task for
901 * After this function completes, port_task is guranteed not to
902 * be running or scheduled.
905 * Kernel thread context (may sleep)
907 void ata_port_flush_task(struct ata_port *ap)
913 spin_lock_irqsave(&ap->host_set->lock, flags);
914 ap->flags |= ATA_FLAG_FLUSH_PORT_TASK;
915 spin_unlock_irqrestore(&ap->host_set->lock, flags);
917 DPRINTK("flush #1\n");
918 flush_workqueue(ata_wq);
921 * At this point, if a task is running, it's guaranteed to see
922 * the FLUSH flag; thus, it will never queue pio tasks again.
925 if (!cancel_delayed_work(&ap->port_task)) {
926 DPRINTK("flush #2\n");
927 flush_workqueue(ata_wq);
930 spin_lock_irqsave(&ap->host_set->lock, flags);
931 ap->flags &= ~ATA_FLAG_FLUSH_PORT_TASK;
932 spin_unlock_irqrestore(&ap->host_set->lock, flags);
937 void ata_qc_complete_internal(struct ata_queued_cmd *qc)
939 struct completion *waiting = qc->private_data;
941 qc->ap->ops->tf_read(qc->ap, &qc->tf);
946 * ata_exec_internal - execute libata internal command
947 * @ap: Port to which the command is sent
948 * @dev: Device to which the command is sent
949 * @tf: Taskfile registers for the command and the result
950 * @dma_dir: Data tranfer direction of the command
951 * @buf: Data buffer of the command
952 * @buflen: Length of data buffer
954 * Executes libata internal command with timeout. @tf contains
955 * command on entry and result on return. Timeout and error
956 * conditions are reported via return value. No recovery action
957 * is taken after a command times out. It's caller's duty to
958 * clean up after timeout.
961 * None. Should be called with kernel context, might sleep.
965 ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
966 struct ata_taskfile *tf,
967 int dma_dir, void *buf, unsigned int buflen)
969 u8 command = tf->command;
970 struct ata_queued_cmd *qc;
971 DECLARE_COMPLETION(wait);
973 unsigned int err_mask;
975 spin_lock_irqsave(&ap->host_set->lock, flags);
977 qc = ata_qc_new_init(ap, dev);
981 qc->dma_dir = dma_dir;
982 if (dma_dir != DMA_NONE) {
983 ata_sg_init_one(qc, buf, buflen);
984 qc->nsect = buflen / ATA_SECT_SIZE;
987 qc->private_data = &wait;
988 qc->complete_fn = ata_qc_complete_internal;
990 qc->err_mask = ata_qc_issue(qc);
994 spin_unlock_irqrestore(&ap->host_set->lock, flags);
996 if (!wait_for_completion_timeout(&wait, ATA_TMOUT_INTERNAL)) {
997 ata_port_flush_task(ap);
999 spin_lock_irqsave(&ap->host_set->lock, flags);
1001 /* We're racing with irq here. If we lose, the
1002 * following test prevents us from completing the qc
1003 * again. If completion irq occurs after here but
1004 * before the caller cleans up, it will result in a
1005 * spurious interrupt. We can live with that.
1007 if (qc->flags & ATA_QCFLAG_ACTIVE) {
1008 qc->err_mask = AC_ERR_TIMEOUT;
1009 ata_qc_complete(qc);
1010 printk(KERN_WARNING "ata%u: qc timeout (cmd 0x%x)\n",
1014 spin_unlock_irqrestore(&ap->host_set->lock, flags);
1018 err_mask = qc->err_mask;
1022 /* XXX - Some LLDDs (sata_mv) disable port on command failure.
1023 * Until those drivers are fixed, we detect the condition
1024 * here, fail the command with AC_ERR_SYSTEM and reenable the
1027 * Note that this doesn't change any behavior as internal
1028 * command failure results in disabling the device in the
1029 * higher layer for LLDDs without new reset/EH callbacks.
1031 * Kill the following code as soon as those drivers are fixed.
1033 if (ap->flags & ATA_FLAG_PORT_DISABLED) {
1034 err_mask |= AC_ERR_SYSTEM;
1042 * ata_pio_need_iordy - check if iordy needed
1045 * Check if the current speed of the device requires IORDY. Used
1046 * by various controllers for chip configuration.
1049 unsigned int ata_pio_need_iordy(const struct ata_device *adev)
1052 int speed = adev->pio_mode - XFER_PIO_0;
1059 /* If we have no drive specific rule, then PIO 2 is non IORDY */
1061 if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */
1062 pio = adev->id[ATA_ID_EIDE_PIO];
1063 /* Is the speed faster than the drive allows non IORDY ? */
1065 /* This is cycle times not frequency - watch the logic! */
1066 if (pio > 240) /* PIO2 is 240nS per cycle */
1075 * ata_dev_read_id - Read ID data from the specified device
1076 * @ap: port on which target device resides
1077 * @dev: target device
1078 * @p_class: pointer to class of the target device (may be changed)
1079 * @post_reset: is this read ID post-reset?
1080 * @p_id: read IDENTIFY page (newly allocated)
1082 * Read ID data from the specified device. ATA_CMD_ID_ATA is
1083 * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI
1084 * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS
1085 * for pre-ATA4 drives.
1088 * Kernel thread context (may sleep)
1091 * 0 on success, -errno otherwise.
1093 static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev,
1094 unsigned int *p_class, int post_reset, u16 **p_id)
1096 unsigned int class = *p_class;
1097 struct ata_taskfile tf;
1098 unsigned int err_mask = 0;
1103 DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno);
1105 ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
1107 id = kmalloc(sizeof(id[0]) * ATA_ID_WORDS, GFP_KERNEL);
1110 reason = "out of memory";
1115 ata_tf_init(ap, &tf, dev->devno);
1119 tf.command = ATA_CMD_ID_ATA;
1122 tf.command = ATA_CMD_ID_ATAPI;
1126 reason = "unsupported class";
1130 tf.protocol = ATA_PROT_PIO;
1132 err_mask = ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE,
1133 id, sizeof(id[0]) * ATA_ID_WORDS);
1136 reason = "I/O error";
1140 swap_buf_le16(id, ATA_ID_WORDS);
1143 if ((class == ATA_DEV_ATA) != ata_id_is_ata(id)) {
1145 reason = "device reports illegal type";
1149 if (post_reset && class == ATA_DEV_ATA) {
1151 * The exact sequence expected by certain pre-ATA4 drives is:
1154 * INITIALIZE DEVICE PARAMETERS
1156 * Some drives were very specific about that exact sequence.
1158 if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
1159 err_mask = ata_dev_init_params(ap, dev);
1162 reason = "INIT_DEV_PARAMS failed";
1166 /* current CHS translation info (id[53-58]) might be
1167 * changed. reread the identify device info.
1179 printk(KERN_WARNING "ata%u: dev %u failed to IDENTIFY (%s)\n",
1180 ap->id, dev->devno, reason);
1185 static inline u8 ata_dev_knobble(const struct ata_port *ap,
1186 struct ata_device *dev)
1188 return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
1192 * ata_dev_configure - Configure the specified ATA/ATAPI device
1193 * @ap: Port on which target device resides
1194 * @dev: Target device to configure
1195 * @print_info: Enable device info printout
1197 * Configure @dev according to @dev->id. Generic and low-level
1198 * driver specific fixups are also applied.
1201 * Kernel thread context (may sleep)
1204 * 0 on success, -errno otherwise
1206 static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev,
1209 const u16 *id = dev->id;
1210 unsigned int xfer_mask;
1213 if (!ata_dev_present(dev)) {
1214 DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n",
1215 ap->id, dev->devno);
1219 DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno);
1221 /* print device capabilities */
1223 printk(KERN_DEBUG "ata%u: dev %u cfg 49:%04x 82:%04x 83:%04x "
1224 "84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n",
1225 ap->id, dev->devno, id[49], id[82], id[83],
1226 id[84], id[85], id[86], id[87], id[88]);
1228 /* initialize to-be-configured parameters */
1230 dev->max_sectors = 0;
1238 * common ATA, ATAPI feature tests
1241 /* find max transfer mode; for printk only */
1242 xfer_mask = ata_id_xfermask(id);
1246 /* ATA-specific feature tests */
1247 if (dev->class == ATA_DEV_ATA) {
1248 dev->n_sectors = ata_id_n_sectors(id);
1250 if (ata_id_has_lba(id)) {
1251 const char *lba_desc;
1254 dev->flags |= ATA_DFLAG_LBA;
1255 if (ata_id_has_lba48(id)) {
1256 dev->flags |= ATA_DFLAG_LBA48;
1260 /* print device info to dmesg */
1262 printk(KERN_INFO "ata%u: dev %u ATA-%d, "
1263 "max %s, %Lu sectors: %s\n",
1265 ata_id_major_version(id),
1266 ata_mode_string(xfer_mask),
1267 (unsigned long long)dev->n_sectors,
1272 /* Default translation */
1273 dev->cylinders = id[1];
1275 dev->sectors = id[6];
1277 if (ata_id_current_chs_valid(id)) {
1278 /* Current CHS translation is valid. */
1279 dev->cylinders = id[54];
1280 dev->heads = id[55];
1281 dev->sectors = id[56];
1284 /* print device info to dmesg */
1286 printk(KERN_INFO "ata%u: dev %u ATA-%d, "
1287 "max %s, %Lu sectors: CHS %u/%u/%u\n",
1289 ata_id_major_version(id),
1290 ata_mode_string(xfer_mask),
1291 (unsigned long long)dev->n_sectors,
1292 dev->cylinders, dev->heads, dev->sectors);
1298 /* ATAPI-specific feature tests */
1299 else if (dev->class == ATA_DEV_ATAPI) {
1300 rc = atapi_cdb_len(id);
1301 if ((rc < 12) || (rc > ATAPI_CDB_LEN)) {
1302 printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id);
1306 dev->cdb_len = (unsigned int) rc;
1308 /* print device info to dmesg */
1310 printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n",
1311 ap->id, dev->devno, ata_mode_string(xfer_mask));
1314 ap->host->max_cmd_len = 0;
1315 for (i = 0; i < ATA_MAX_DEVICES; i++)
1316 ap->host->max_cmd_len = max_t(unsigned int,
1317 ap->host->max_cmd_len,
1318 ap->device[i].cdb_len);
1320 /* limit bridge transfers to udma5, 200 sectors */
1321 if (ata_dev_knobble(ap, dev)) {
1323 printk(KERN_INFO "ata%u(%u): applying bridge limits\n",
1324 ap->id, dev->devno);
1325 dev->udma_mask &= ATA_UDMA5;
1326 dev->max_sectors = ATA_MAX_SECTORS;
1329 if (ap->ops->dev_config)
1330 ap->ops->dev_config(ap, dev);
1332 DPRINTK("EXIT, drv_stat = 0x%x\n", ata_chk_status(ap));
1336 DPRINTK("EXIT, err\n");
1341 * ata_bus_probe - Reset and probe ATA bus
1344 * Master ATA bus probing function. Initiates a hardware-dependent
1345 * bus reset, then attempts to identify any devices found on
1349 * PCI/etc. bus probe sem.
1352 * Zero on success, non-zero on error.
1355 static int ata_bus_probe(struct ata_port *ap)
1357 unsigned int classes[ATA_MAX_DEVICES];
1358 unsigned int i, rc, found = 0;
1362 /* reset and determine device classes */
1363 for (i = 0; i < ATA_MAX_DEVICES; i++)
1364 classes[i] = ATA_DEV_UNKNOWN;
1366 if (ap->ops->probe_reset) {
1367 rc = ap->ops->probe_reset(ap, classes);
1369 printk("ata%u: reset failed (errno=%d)\n", ap->id, rc);
1373 ap->ops->phy_reset(ap);
1375 if (!(ap->flags & ATA_FLAG_PORT_DISABLED))
1376 for (i = 0; i < ATA_MAX_DEVICES; i++)
1377 classes[i] = ap->device[i].class;
1382 for (i = 0; i < ATA_MAX_DEVICES; i++)
1383 if (classes[i] == ATA_DEV_UNKNOWN)
1384 classes[i] = ATA_DEV_NONE;
1386 /* read IDENTIFY page and configure devices */
1387 for (i = 0; i < ATA_MAX_DEVICES; i++) {
1388 struct ata_device *dev = &ap->device[i];
1390 dev->class = classes[i];
1392 if (!ata_dev_present(dev))
1395 WARN_ON(dev->id != NULL);
1396 if (ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id)) {
1397 dev->class = ATA_DEV_NONE;
1401 if (ata_dev_configure(ap, dev, 1)) {
1402 ata_dev_disable(ap, dev);
1410 goto err_out_disable;
1413 if (ap->flags & ATA_FLAG_PORT_DISABLED)
1414 goto err_out_disable;
1419 ap->ops->port_disable(ap);
1424 * ata_port_probe - Mark port as enabled
1425 * @ap: Port for which we indicate enablement
1427 * Modify @ap data structure such that the system
1428 * thinks that the entire port is enabled.
1430 * LOCKING: host_set lock, or some other form of
1434 void ata_port_probe(struct ata_port *ap)
1436 ap->flags &= ~ATA_FLAG_PORT_DISABLED;
1440 * sata_print_link_status - Print SATA link status
1441 * @ap: SATA port to printk link status about
1443 * This function prints link speed and status of a SATA link.
1448 static void sata_print_link_status(struct ata_port *ap)
1453 if (!ap->ops->scr_read)
1456 sstatus = scr_read(ap, SCR_STATUS);
1458 if (sata_dev_present(ap)) {
1459 tmp = (sstatus >> 4) & 0xf;
1462 else if (tmp & (1 << 1))
1465 speed = "<unknown>";
1466 printk(KERN_INFO "ata%u: SATA link up %s Gbps (SStatus %X)\n",
1467 ap->id, speed, sstatus);
1469 printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n",
1475 * __sata_phy_reset - Wake/reset a low-level SATA PHY
1476 * @ap: SATA port associated with target SATA PHY.
1478 * This function issues commands to standard SATA Sxxx
1479 * PHY registers, to wake up the phy (and device), and
1480 * clear any reset condition.
1483 * PCI/etc. bus probe sem.
1486 void __sata_phy_reset(struct ata_port *ap)
1489 unsigned long timeout = jiffies + (HZ * 5);
1491 if (ap->flags & ATA_FLAG_SATA_RESET) {
1492 /* issue phy wake/reset */
1493 scr_write_flush(ap, SCR_CONTROL, 0x301);
1494 /* Couldn't find anything in SATA I/II specs, but
1495 * AHCI-1.1 10.4.2 says at least 1 ms. */
1498 scr_write_flush(ap, SCR_CONTROL, 0x300); /* phy wake/clear reset */
1500 /* wait for phy to become ready, if necessary */
1503 sstatus = scr_read(ap, SCR_STATUS);
1504 if ((sstatus & 0xf) != 1)
1506 } while (time_before(jiffies, timeout));
1508 /* print link status */
1509 sata_print_link_status(ap);
1511 /* TODO: phy layer with polling, timeouts, etc. */
1512 if (sata_dev_present(ap))
1515 ata_port_disable(ap);
1517 if (ap->flags & ATA_FLAG_PORT_DISABLED)
1520 if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
1521 ata_port_disable(ap);
1525 ap->cbl = ATA_CBL_SATA;
1529 * sata_phy_reset - Reset SATA bus.
1530 * @ap: SATA port associated with target SATA PHY.
1532 * This function resets the SATA bus, and then probes
1533 * the bus for devices.
1536 * PCI/etc. bus probe sem.
1539 void sata_phy_reset(struct ata_port *ap)
1541 __sata_phy_reset(ap);
1542 if (ap->flags & ATA_FLAG_PORT_DISABLED)
1548 * ata_dev_pair - return other device on cable
1552 * Obtain the other device on the same cable, or if none is
1553 * present NULL is returned
1556 struct ata_device *ata_dev_pair(struct ata_port *ap, struct ata_device *adev)
1558 struct ata_device *pair = &ap->device[1 - adev->devno];
1559 if (!ata_dev_present(pair))
1565 * ata_port_disable - Disable port.
1566 * @ap: Port to be disabled.
1568 * Modify @ap data structure such that the system
1569 * thinks that the entire port is disabled, and should
1570 * never attempt to probe or communicate with devices
1573 * LOCKING: host_set lock, or some other form of
1577 void ata_port_disable(struct ata_port *ap)
1579 ap->device[0].class = ATA_DEV_NONE;
1580 ap->device[1].class = ATA_DEV_NONE;
1581 ap->flags |= ATA_FLAG_PORT_DISABLED;
1585 * This mode timing computation functionality is ported over from
1586 * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik
1589 * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
1590 * These were taken from ATA/ATAPI-6 standard, rev 0a, except
1591 * for PIO 5, which is a nonstandard extension and UDMA6, which
1592 * is currently supported only by Maxtor drives.
1595 static const struct ata_timing ata_timing[] = {
1597 { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
1598 { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
1599 { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
1600 { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
1602 { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
1603 { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
1604 { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
1606 /* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */
1608 { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
1609 { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
1610 { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
1612 { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
1613 { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
1614 { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
1616 /* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */
1617 { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
1618 { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
1620 { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
1621 { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
1622 { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
1624 /* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */
1629 #define ENOUGH(v,unit) (((v)-1)/(unit)+1)
1630 #define EZ(v,unit) ((v)?ENOUGH(v,unit):0)
1632 static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
1634 q->setup = EZ(t->setup * 1000, T);
1635 q->act8b = EZ(t->act8b * 1000, T);
1636 q->rec8b = EZ(t->rec8b * 1000, T);
1637 q->cyc8b = EZ(t->cyc8b * 1000, T);
1638 q->active = EZ(t->active * 1000, T);
1639 q->recover = EZ(t->recover * 1000, T);
1640 q->cycle = EZ(t->cycle * 1000, T);
1641 q->udma = EZ(t->udma * 1000, UT);
1644 void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
1645 struct ata_timing *m, unsigned int what)
1647 if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup);
1648 if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b);
1649 if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b);
1650 if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b);
1651 if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active);
1652 if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
1653 if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle);
1654 if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma);
1657 static const struct ata_timing* ata_timing_find_mode(unsigned short speed)
1659 const struct ata_timing *t;
1661 for (t = ata_timing; t->mode != speed; t++)
1662 if (t->mode == 0xFF)
1667 int ata_timing_compute(struct ata_device *adev, unsigned short speed,
1668 struct ata_timing *t, int T, int UT)
1670 const struct ata_timing *s;
1671 struct ata_timing p;
1677 if (!(s = ata_timing_find_mode(speed)))
1680 memcpy(t, s, sizeof(*s));
1683 * If the drive is an EIDE drive, it can tell us it needs extended
1684 * PIO/MW_DMA cycle timing.
1687 if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
1688 memset(&p, 0, sizeof(p));
1689 if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
1690 if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO];
1691 else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY];
1692 } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) {
1693 p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN];
1695 ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
1699 * Convert the timing to bus clock counts.
1702 ata_timing_quantize(t, t, T, UT);
1705 * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
1706 * S.M.A.R.T * and some other commands. We have to ensure that the
1707 * DMA cycle timing is slower/equal than the fastest PIO timing.
1710 if (speed > XFER_PIO_4) {
1711 ata_timing_compute(adev, adev->pio_mode, &p, T, UT);
1712 ata_timing_merge(&p, t, t, ATA_TIMING_ALL);
1716 * Lengthen active & recovery time so that cycle time is correct.
1719 if (t->act8b + t->rec8b < t->cyc8b) {
1720 t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
1721 t->rec8b = t->cyc8b - t->act8b;
1724 if (t->active + t->recover < t->cycle) {
1725 t->active += (t->cycle - (t->active + t->recover)) / 2;
1726 t->recover = t->cycle - t->active;
1732 static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev)
1734 unsigned int err_mask;
1737 if (dev->xfer_shift == ATA_SHIFT_PIO)
1738 dev->flags |= ATA_DFLAG_PIO;
1740 err_mask = ata_dev_set_xfermode(ap, dev);
1743 "ata%u: failed to set xfermode (err_mask=0x%x)\n",
1748 rc = ata_dev_revalidate(ap, dev, 0);
1751 "ata%u: failed to revalidate after set xfermode\n",
1756 DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n",
1757 dev->xfer_shift, (int)dev->xfer_mode);
1759 printk(KERN_INFO "ata%u: dev %u configured for %s\n",
1761 ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)));
1765 static int ata_host_set_pio(struct ata_port *ap)
1769 for (i = 0; i < ATA_MAX_DEVICES; i++) {
1770 struct ata_device *dev = &ap->device[i];
1772 if (!ata_dev_present(dev))
1775 if (!dev->pio_mode) {
1776 printk(KERN_WARNING "ata%u: no PIO support for device %d.\n", ap->id, i);
1780 dev->xfer_mode = dev->pio_mode;
1781 dev->xfer_shift = ATA_SHIFT_PIO;
1782 if (ap->ops->set_piomode)
1783 ap->ops->set_piomode(ap, dev);
1789 static void ata_host_set_dma(struct ata_port *ap)
1793 for (i = 0; i < ATA_MAX_DEVICES; i++) {
1794 struct ata_device *dev = &ap->device[i];
1796 if (!ata_dev_present(dev) || !dev->dma_mode)
1799 dev->xfer_mode = dev->dma_mode;
1800 dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode);
1801 if (ap->ops->set_dmamode)
1802 ap->ops->set_dmamode(ap, dev);
1807 * ata_set_mode - Program timings and issue SET FEATURES - XFER
1808 * @ap: port on which timings will be programmed
1810 * Set ATA device disk transfer mode (PIO3, UDMA6, etc.).
1813 * PCI/etc. bus probe sem.
1815 static void ata_set_mode(struct ata_port *ap)
1819 /* step 1: calculate xfer_mask */
1820 for (i = 0; i < ATA_MAX_DEVICES; i++) {
1821 struct ata_device *dev = &ap->device[i];
1822 unsigned int pio_mask, dma_mask;
1824 if (!ata_dev_present(dev))
1827 ata_dev_xfermask(ap, dev);
1829 /* TODO: let LLDD filter dev->*_mask here */
1831 pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0);
1832 dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask);
1833 dev->pio_mode = ata_xfer_mask2mode(pio_mask);
1834 dev->dma_mode = ata_xfer_mask2mode(dma_mask);
1837 /* step 2: always set host PIO timings */
1838 rc = ata_host_set_pio(ap);
1842 /* step 3: set host DMA timings */
1843 ata_host_set_dma(ap);
1845 /* step 4: update devices' xfer mode */
1846 for (i = 0; i < ATA_MAX_DEVICES; i++) {
1847 struct ata_device *dev = &ap->device[i];
1849 if (!ata_dev_present(dev))
1852 if (ata_dev_set_mode(ap, dev))
1856 if (ap->ops->post_set_mode)
1857 ap->ops->post_set_mode(ap);
1862 ata_port_disable(ap);
1866 * ata_tf_to_host - issue ATA taskfile to host controller
1867 * @ap: port to which command is being issued
1868 * @tf: ATA taskfile register set
1870 * Issues ATA taskfile register set to ATA host controller,
1871 * with proper synchronization with interrupt handler and
1875 * spin_lock_irqsave(host_set lock)
1878 static inline void ata_tf_to_host(struct ata_port *ap,
1879 const struct ata_taskfile *tf)
1881 ap->ops->tf_load(ap, tf);
1882 ap->ops->exec_command(ap, tf);
1886 * ata_busy_sleep - sleep until BSY clears, or timeout
1887 * @ap: port containing status register to be polled
1888 * @tmout_pat: impatience timeout
1889 * @tmout: overall timeout
1891 * Sleep until ATA Status register bit BSY clears,
1892 * or a timeout occurs.
1897 unsigned int ata_busy_sleep (struct ata_port *ap,
1898 unsigned long tmout_pat, unsigned long tmout)
1900 unsigned long timer_start, timeout;
1903 status = ata_busy_wait(ap, ATA_BUSY, 300);
1904 timer_start = jiffies;
1905 timeout = timer_start + tmout_pat;
1906 while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) {
1908 status = ata_busy_wait(ap, ATA_BUSY, 3);
1911 if (status & ATA_BUSY)
1912 printk(KERN_WARNING "ata%u is slow to respond, "
1913 "please be patient\n", ap->id);
1915 timeout = timer_start + tmout;
1916 while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) {
1918 status = ata_chk_status(ap);
1921 if (status & ATA_BUSY) {
1922 printk(KERN_ERR "ata%u failed to respond (%lu secs)\n",
1923 ap->id, tmout / HZ);
1930 static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask)
1932 struct ata_ioports *ioaddr = &ap->ioaddr;
1933 unsigned int dev0 = devmask & (1 << 0);
1934 unsigned int dev1 = devmask & (1 << 1);
1935 unsigned long timeout;
1937 /* if device 0 was found in ata_devchk, wait for its
1941 ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
1943 /* if device 1 was found in ata_devchk, wait for
1944 * register access, then wait for BSY to clear
1946 timeout = jiffies + ATA_TMOUT_BOOT;
1950 ap->ops->dev_select(ap, 1);
1951 if (ap->flags & ATA_FLAG_MMIO) {
1952 nsect = readb((void __iomem *) ioaddr->nsect_addr);
1953 lbal = readb((void __iomem *) ioaddr->lbal_addr);
1955 nsect = inb(ioaddr->nsect_addr);
1956 lbal = inb(ioaddr->lbal_addr);
1958 if ((nsect == 1) && (lbal == 1))
1960 if (time_after(jiffies, timeout)) {
1964 msleep(50); /* give drive a breather */
1967 ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
1969 /* is all this really necessary? */
1970 ap->ops->dev_select(ap, 0);
1972 ap->ops->dev_select(ap, 1);
1974 ap->ops->dev_select(ap, 0);
1977 static unsigned int ata_bus_softreset(struct ata_port *ap,
1978 unsigned int devmask)
1980 struct ata_ioports *ioaddr = &ap->ioaddr;
1982 DPRINTK("ata%u: bus reset via SRST\n", ap->id);
1984 /* software reset. causes dev0 to be selected */
1985 if (ap->flags & ATA_FLAG_MMIO) {
1986 writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
1987 udelay(20); /* FIXME: flush */
1988 writeb(ap->ctl | ATA_SRST, (void __iomem *) ioaddr->ctl_addr);
1989 udelay(20); /* FIXME: flush */
1990 writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
1992 outb(ap->ctl, ioaddr->ctl_addr);
1994 outb(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
1996 outb(ap->ctl, ioaddr->ctl_addr);
1999 /* spec mandates ">= 2ms" before checking status.
2000 * We wait 150ms, because that was the magic delay used for
2001 * ATAPI devices in Hale Landis's ATADRVR, for the period of time
2002 * between when the ATA command register is written, and then
2003 * status is checked. Because waiting for "a while" before
2004 * checking status is fine, post SRST, we perform this magic
2005 * delay here as well.
2007 * Old drivers/ide uses the 2mS rule and then waits for ready
2012 /* Before we perform post reset processing we want to see if
2013 the bus shows 0xFF because the odd clown forgets the D7 pulldown
2016 if (ata_check_status(ap) == 0xFF)
2017 return 1; /* Positive is failure for some reason */
2019 ata_bus_post_reset(ap, devmask);
2025 * ata_bus_reset - reset host port and associated ATA channel
2026 * @ap: port to reset
2028 * This is typically the first time we actually start issuing
2029 * commands to the ATA channel. We wait for BSY to clear, then
2030 * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its
2031 * result. Determine what devices, if any, are on the channel
2032 * by looking at the device 0/1 error register. Look at the signature
2033 * stored in each device's taskfile registers, to determine if
2034 * the device is ATA or ATAPI.
2037 * PCI/etc. bus probe sem.
2038 * Obtains host_set lock.
2041 * Sets ATA_FLAG_PORT_DISABLED if bus reset fails.
2044 void ata_bus_reset(struct ata_port *ap)
2046 struct ata_ioports *ioaddr = &ap->ioaddr;
2047 unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
2049 unsigned int dev0, dev1 = 0, devmask = 0;
2051 DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no);
2053 /* determine if device 0/1 are present */
2054 if (ap->flags & ATA_FLAG_SATA_RESET)
2057 dev0 = ata_devchk(ap, 0);
2059 dev1 = ata_devchk(ap, 1);
2063 devmask |= (1 << 0);
2065 devmask |= (1 << 1);
2067 /* select device 0 again */
2068 ap->ops->dev_select(ap, 0);
2070 /* issue bus reset */
2071 if (ap->flags & ATA_FLAG_SRST)
2072 if (ata_bus_softreset(ap, devmask))
2076 * determine by signature whether we have ATA or ATAPI devices
2078 ap->device[0].class = ata_dev_try_classify(ap, 0, &err);
2079 if ((slave_possible) && (err != 0x81))
2080 ap->device[1].class = ata_dev_try_classify(ap, 1, &err);
2082 /* re-enable interrupts */
2083 if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */
2086 /* is double-select really necessary? */
2087 if (ap->device[1].class != ATA_DEV_NONE)
2088 ap->ops->dev_select(ap, 1);
2089 if (ap->device[0].class != ATA_DEV_NONE)
2090 ap->ops->dev_select(ap, 0);
2092 /* if no devices were detected, disable this port */
2093 if ((ap->device[0].class == ATA_DEV_NONE) &&
2094 (ap->device[1].class == ATA_DEV_NONE))
2097 if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
2098 /* set up device control for ATA_FLAG_SATA_RESET */
2099 if (ap->flags & ATA_FLAG_MMIO)
2100 writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
2102 outb(ap->ctl, ioaddr->ctl_addr);
2109 printk(KERN_ERR "ata%u: disabling port\n", ap->id);
2110 ap->ops->port_disable(ap);
2115 static int sata_phy_resume(struct ata_port *ap)
2117 unsigned long timeout = jiffies + (HZ * 5);
2120 scr_write_flush(ap, SCR_CONTROL, 0x300);
2122 /* Wait for phy to become ready, if necessary. */
2125 sstatus = scr_read(ap, SCR_STATUS);
2126 if ((sstatus & 0xf) != 1)
2128 } while (time_before(jiffies, timeout));
2134 * ata_std_probeinit - initialize probing
2135 * @ap: port to be probed
2137 * @ap is about to be probed. Initialize it. This function is
2138 * to be used as standard callback for ata_drive_probe_reset().
2140 * NOTE!!! Do not use this function as probeinit if a low level
2141 * driver implements only hardreset. Just pass NULL as probeinit
2142 * in that case. Using this function is probably okay but doing
2143 * so makes reset sequence different from the original
2144 * ->phy_reset implementation and Jeff nervous. :-P
2146 extern void ata_std_probeinit(struct ata_port *ap)
2148 if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) {
2149 sata_phy_resume(ap);
2150 if (sata_dev_present(ap))
2151 ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
2156 * ata_std_softreset - reset host port via ATA SRST
2157 * @ap: port to reset
2158 * @verbose: fail verbosely
2159 * @classes: resulting classes of attached devices
2161 * Reset host port using ATA SRST. This function is to be used
2162 * as standard callback for ata_drive_*_reset() functions.
2165 * Kernel thread context (may sleep)
2168 * 0 on success, -errno otherwise.
2170 int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes)
2172 unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
2173 unsigned int devmask = 0, err_mask;
2178 if (ap->ops->scr_read && !sata_dev_present(ap)) {
2179 classes[0] = ATA_DEV_NONE;
2183 /* determine if device 0/1 are present */
2184 if (ata_devchk(ap, 0))
2185 devmask |= (1 << 0);
2186 if (slave_possible && ata_devchk(ap, 1))
2187 devmask |= (1 << 1);
2189 /* select device 0 again */
2190 ap->ops->dev_select(ap, 0);
2192 /* issue bus reset */
2193 DPRINTK("about to softreset, devmask=%x\n", devmask);
2194 err_mask = ata_bus_softreset(ap, devmask);
2197 printk(KERN_ERR "ata%u: SRST failed (err_mask=0x%x)\n",
2200 DPRINTK("EXIT, softreset failed (err_mask=0x%x)\n",
2205 /* determine by signature whether we have ATA or ATAPI devices */
2206 classes[0] = ata_dev_try_classify(ap, 0, &err);
2207 if (slave_possible && err != 0x81)
2208 classes[1] = ata_dev_try_classify(ap, 1, &err);
2211 DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
2216 * sata_std_hardreset - reset host port via SATA phy reset
2217 * @ap: port to reset
2218 * @verbose: fail verbosely
2219 * @class: resulting class of attached device
2221 * SATA phy-reset host port using DET bits of SControl register.
2222 * This function is to be used as standard callback for
2223 * ata_drive_*_reset().
2226 * Kernel thread context (may sleep)
2229 * 0 on success, -errno otherwise.
2231 int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class)
2235 /* Issue phy wake/reset */
2236 scr_write_flush(ap, SCR_CONTROL, 0x301);
2239 * Couldn't find anything in SATA I/II specs, but AHCI-1.1
2240 * 10.4.2 says at least 1 ms.
2244 /* Bring phy back */
2245 sata_phy_resume(ap);
2247 /* TODO: phy layer with polling, timeouts, etc. */
2248 if (!sata_dev_present(ap)) {
2249 *class = ATA_DEV_NONE;
2250 DPRINTK("EXIT, link offline\n");
2254 if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
2256 printk(KERN_ERR "ata%u: COMRESET failed "
2257 "(device not ready)\n", ap->id);
2259 DPRINTK("EXIT, device not ready\n");
2263 ap->ops->dev_select(ap, 0); /* probably unnecessary */
2265 *class = ata_dev_try_classify(ap, 0, NULL);
2267 DPRINTK("EXIT, class=%u\n", *class);
2272 * ata_std_postreset - standard postreset callback
2273 * @ap: the target ata_port
2274 * @classes: classes of attached devices
2276 * This function is invoked after a successful reset. Note that
2277 * the device might have been reset more than once using
2278 * different reset methods before postreset is invoked.
2280 * This function is to be used as standard callback for
2281 * ata_drive_*_reset().
2284 * Kernel thread context (may sleep)
2286 void ata_std_postreset(struct ata_port *ap, unsigned int *classes)
2290 /* set cable type if it isn't already set */
2291 if (ap->cbl == ATA_CBL_NONE && ap->flags & ATA_FLAG_SATA)
2292 ap->cbl = ATA_CBL_SATA;
2294 /* print link status */
2295 if (ap->cbl == ATA_CBL_SATA)
2296 sata_print_link_status(ap);
2298 /* re-enable interrupts */
2299 if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */
2302 /* is double-select really necessary? */
2303 if (classes[0] != ATA_DEV_NONE)
2304 ap->ops->dev_select(ap, 1);
2305 if (classes[1] != ATA_DEV_NONE)
2306 ap->ops->dev_select(ap, 0);
2308 /* bail out if no device is present */
2309 if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
2310 DPRINTK("EXIT, no device\n");
2314 /* set up device control */
2315 if (ap->ioaddr.ctl_addr) {
2316 if (ap->flags & ATA_FLAG_MMIO)
2317 writeb(ap->ctl, (void __iomem *) ap->ioaddr.ctl_addr);
2319 outb(ap->ctl, ap->ioaddr.ctl_addr);
2326 * ata_std_probe_reset - standard probe reset method
2327 * @ap: prot to perform probe-reset
2328 * @classes: resulting classes of attached devices
2330 * The stock off-the-shelf ->probe_reset method.
2333 * Kernel thread context (may sleep)
2336 * 0 on success, -errno otherwise.
2338 int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes)
2340 ata_reset_fn_t hardreset;
2343 if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read)
2344 hardreset = sata_std_hardreset;
2346 return ata_drive_probe_reset(ap, ata_std_probeinit,
2347 ata_std_softreset, hardreset,
2348 ata_std_postreset, classes);
2351 static int do_probe_reset(struct ata_port *ap, ata_reset_fn_t reset,
2352 ata_postreset_fn_t postreset,
2353 unsigned int *classes)
2357 for (i = 0; i < ATA_MAX_DEVICES; i++)
2358 classes[i] = ATA_DEV_UNKNOWN;
2360 rc = reset(ap, 0, classes);
2364 /* If any class isn't ATA_DEV_UNKNOWN, consider classification
2365 * is complete and convert all ATA_DEV_UNKNOWN to
2368 for (i = 0; i < ATA_MAX_DEVICES; i++)
2369 if (classes[i] != ATA_DEV_UNKNOWN)
2372 if (i < ATA_MAX_DEVICES)
2373 for (i = 0; i < ATA_MAX_DEVICES; i++)
2374 if (classes[i] == ATA_DEV_UNKNOWN)
2375 classes[i] = ATA_DEV_NONE;
2378 postreset(ap, classes);
2380 return classes[0] != ATA_DEV_UNKNOWN ? 0 : -ENODEV;
2384 * ata_drive_probe_reset - Perform probe reset with given methods
2385 * @ap: port to reset
2386 * @probeinit: probeinit method (can be NULL)
2387 * @softreset: softreset method (can be NULL)
2388 * @hardreset: hardreset method (can be NULL)
2389 * @postreset: postreset method (can be NULL)
2390 * @classes: resulting classes of attached devices
2392 * Reset the specified port and classify attached devices using
2393 * given methods. This function prefers softreset but tries all
2394 * possible reset sequences to reset and classify devices. This
2395 * function is intended to be used for constructing ->probe_reset
2396 * callback by low level drivers.
2398 * Reset methods should follow the following rules.
2400 * - Return 0 on sucess, -errno on failure.
2401 * - If classification is supported, fill classes[] with
2402 * recognized class codes.
2403 * - If classification is not supported, leave classes[] alone.
2404 * - If verbose is non-zero, print error message on failure;
2405 * otherwise, shut up.
2408 * Kernel thread context (may sleep)
2411 * 0 on success, -EINVAL if no reset method is avaliable, -ENODEV
2412 * if classification fails, and any error code from reset
2415 int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
2416 ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
2417 ata_postreset_fn_t postreset, unsigned int *classes)
2425 rc = do_probe_reset(ap, softreset, postreset, classes);
2433 rc = do_probe_reset(ap, hardreset, postreset, classes);
2434 if (rc == 0 || rc != -ENODEV)
2438 rc = do_probe_reset(ap, softreset, postreset, classes);
2444 * ata_dev_same_device - Determine whether new ID matches configured device
2445 * @ap: port on which the device to compare against resides
2446 * @dev: device to compare against
2447 * @new_class: class of the new device
2448 * @new_id: IDENTIFY page of the new device
2450 * Compare @new_class and @new_id against @dev and determine
2451 * whether @dev is the device indicated by @new_class and
2458 * 1 if @dev matches @new_class and @new_id, 0 otherwise.
2460 static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev,
2461 unsigned int new_class, const u16 *new_id)
2463 const u16 *old_id = dev->id;
2464 unsigned char model[2][41], serial[2][21];
2467 if (dev->class != new_class) {
2469 "ata%u: dev %u class mismatch %d != %d\n",
2470 ap->id, dev->devno, dev->class, new_class);
2474 ata_id_c_string(old_id, model[0], ATA_ID_PROD_OFS, sizeof(model[0]));
2475 ata_id_c_string(new_id, model[1], ATA_ID_PROD_OFS, sizeof(model[1]));
2476 ata_id_c_string(old_id, serial[0], ATA_ID_SERNO_OFS, sizeof(serial[0]));
2477 ata_id_c_string(new_id, serial[1], ATA_ID_SERNO_OFS, sizeof(serial[1]));
2478 new_n_sectors = ata_id_n_sectors(new_id);
2480 if (strcmp(model[0], model[1])) {
2482 "ata%u: dev %u model number mismatch '%s' != '%s'\n",
2483 ap->id, dev->devno, model[0], model[1]);
2487 if (strcmp(serial[0], serial[1])) {
2489 "ata%u: dev %u serial number mismatch '%s' != '%s'\n",
2490 ap->id, dev->devno, serial[0], serial[1]);
2494 if (dev->class == ATA_DEV_ATA && dev->n_sectors != new_n_sectors) {
2496 "ata%u: dev %u n_sectors mismatch %llu != %llu\n",
2497 ap->id, dev->devno, (unsigned long long)dev->n_sectors,
2498 (unsigned long long)new_n_sectors);
2506 * ata_dev_revalidate - Revalidate ATA device
2507 * @ap: port on which the device to revalidate resides
2508 * @dev: device to revalidate
2509 * @post_reset: is this revalidation after reset?
2511 * Re-read IDENTIFY page and make sure @dev is still attached to
2515 * Kernel thread context (may sleep)
2518 * 0 on success, negative errno otherwise
2520 int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev,
2527 if (!ata_dev_present(dev))
2533 /* allocate & read ID data */
2534 rc = ata_dev_read_id(ap, dev, &class, post_reset, &id);
2538 /* is the device still there? */
2539 if (!ata_dev_same_device(ap, dev, class, id)) {
2547 /* configure device according to the new ID */
2548 return ata_dev_configure(ap, dev, 0);
2551 printk(KERN_ERR "ata%u: dev %u revalidation failed (errno=%d)\n",
2552 ap->id, dev->devno, rc);
2557 static const char * const ata_dma_blacklist [] = {
2558 "WDC AC11000H", NULL,
2559 "WDC AC22100H", NULL,
2560 "WDC AC32500H", NULL,
2561 "WDC AC33100H", NULL,
2562 "WDC AC31600H", NULL,
2563 "WDC AC32100H", "24.09P07",
2564 "WDC AC23200L", "21.10N21",
2565 "Compaq CRD-8241B", NULL,
2570 "SanDisk SDP3B", NULL,
2571 "SanDisk SDP3B-64", NULL,
2572 "SANYO CD-ROM CRD", NULL,
2573 "HITACHI CDR-8", NULL,
2574 "HITACHI CDR-8335", NULL,
2575 "HITACHI CDR-8435", NULL,
2576 "Toshiba CD-ROM XM-6202B", NULL,
2577 "TOSHIBA CD-ROM XM-1702BC", NULL,
2579 "E-IDE CD-ROM CR-840", NULL,
2580 "CD-ROM Drive/F5A", NULL,
2581 "WPI CDD-820", NULL,
2582 "SAMSUNG CD-ROM SC-148C", NULL,
2583 "SAMSUNG CD-ROM SC", NULL,
2584 "SanDisk SDP3B-64", NULL,
2585 "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,
2586 "_NEC DV5800A", NULL,
2587 "SAMSUNG CD-ROM SN-124", "N001"
2590 static int ata_strim(char *s, size_t len)
2592 len = strnlen(s, len);
2594 /* ATAPI specifies that empty space is blank-filled; remove blanks */
2595 while ((len > 0) && (s[len - 1] == ' ')) {
2602 static int ata_dma_blacklisted(const struct ata_device *dev)
2604 unsigned char model_num[40];
2605 unsigned char model_rev[16];
2606 unsigned int nlen, rlen;
2609 ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS,
2611 ata_id_string(dev->id, model_rev, ATA_ID_FW_REV_OFS,
2613 nlen = ata_strim(model_num, sizeof(model_num));
2614 rlen = ata_strim(model_rev, sizeof(model_rev));
2616 for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i += 2) {
2617 if (!strncmp(ata_dma_blacklist[i], model_num, nlen)) {
2618 if (ata_dma_blacklist[i+1] == NULL)
2620 if (!strncmp(ata_dma_blacklist[i], model_rev, rlen))
2628 * ata_dev_xfermask - Compute supported xfermask of the given device
2629 * @ap: Port on which the device to compute xfermask for resides
2630 * @dev: Device to compute xfermask for
2632 * Compute supported xfermask of @dev and store it in
2633 * dev->*_mask. This function is responsible for applying all
2634 * known limits including host controller limits, device
2640 static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev)
2642 unsigned long xfer_mask;
2645 xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
2648 /* use port-wide xfermask for now */
2649 for (i = 0; i < ATA_MAX_DEVICES; i++) {
2650 struct ata_device *d = &ap->device[i];
2651 if (!ata_dev_present(d))
2653 xfer_mask &= ata_pack_xfermask(d->pio_mask, d->mwdma_mask,
2655 xfer_mask &= ata_id_xfermask(d->id);
2656 if (ata_dma_blacklisted(d))
2657 xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
2660 if (ata_dma_blacklisted(dev))
2661 printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, "
2662 "disabling DMA\n", ap->id, dev->devno);
2664 ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
2669 * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command
2670 * @ap: Port associated with device @dev
2671 * @dev: Device to which command will be sent
2673 * Issue SET FEATURES - XFER MODE command to device @dev
2677 * PCI/etc. bus probe sem.
2680 * 0 on success, AC_ERR_* mask otherwise.
2683 static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
2684 struct ata_device *dev)
2686 struct ata_taskfile tf;
2687 unsigned int err_mask;
2689 /* set up set-features taskfile */
2690 DPRINTK("set features - xfer mode\n");
2692 ata_tf_init(ap, &tf, dev->devno);
2693 tf.command = ATA_CMD_SET_FEATURES;
2694 tf.feature = SETFEATURES_XFER;
2695 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
2696 tf.protocol = ATA_PROT_NODATA;
2697 tf.nsect = dev->xfer_mode;
2699 err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0);
2701 DPRINTK("EXIT, err_mask=%x\n", err_mask);
2706 * ata_dev_init_params - Issue INIT DEV PARAMS command
2707 * @ap: Port associated with device @dev
2708 * @dev: Device to which command will be sent
2711 * Kernel thread context (may sleep)
2714 * 0 on success, AC_ERR_* mask otherwise.
2717 static unsigned int ata_dev_init_params(struct ata_port *ap,
2718 struct ata_device *dev)
2720 struct ata_taskfile tf;
2721 unsigned int err_mask;
2722 u16 sectors = dev->id[6];
2723 u16 heads = dev->id[3];
2725 /* Number of sectors per track 1-255. Number of heads 1-16 */
2726 if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
2729 /* set up init dev params taskfile */
2730 DPRINTK("init dev params \n");
2732 ata_tf_init(ap, &tf, dev->devno);
2733 tf.command = ATA_CMD_INIT_DEV_PARAMS;
2734 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
2735 tf.protocol = ATA_PROT_NODATA;
2737 tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
2739 err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0);
2741 DPRINTK("EXIT, err_mask=%x\n", err_mask);
2746 * ata_sg_clean - Unmap DMA memory associated with command
2747 * @qc: Command containing DMA memory to be released
2749 * Unmap all mapped DMA memory associated with this command.
2752 * spin_lock_irqsave(host_set lock)
2755 static void ata_sg_clean(struct ata_queued_cmd *qc)
2757 struct ata_port *ap = qc->ap;
2758 struct scatterlist *sg = qc->__sg;
2759 int dir = qc->dma_dir;
2760 void *pad_buf = NULL;
2762 WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP));
2763 WARN_ON(sg == NULL);
2765 if (qc->flags & ATA_QCFLAG_SINGLE)
2766 WARN_ON(qc->n_elem > 1);
2768 VPRINTK("unmapping %u sg elements\n", qc->n_elem);
2770 /* if we padded the buffer out to 32-bit bound, and data
2771 * xfer direction is from-device, we must copy from the
2772 * pad buffer back into the supplied buffer
2774 if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE))
2775 pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
2777 if (qc->flags & ATA_QCFLAG_SG) {
2779 dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
2780 /* restore last sg */
2781 sg[qc->orig_n_elem - 1].length += qc->pad_len;
2783 struct scatterlist *psg = &qc->pad_sgent;
2784 void *addr = kmap_atomic(psg->page, KM_IRQ0);
2785 memcpy(addr + psg->offset, pad_buf, qc->pad_len);
2786 kunmap_atomic(addr, KM_IRQ0);
2790 dma_unmap_single(ap->dev,
2791 sg_dma_address(&sg[0]), sg_dma_len(&sg[0]),
2794 sg->length += qc->pad_len;
2796 memcpy(qc->buf_virt + sg->length - qc->pad_len,
2797 pad_buf, qc->pad_len);
2800 qc->flags &= ~ATA_QCFLAG_DMAMAP;
2805 * ata_fill_sg - Fill PCI IDE PRD table
2806 * @qc: Metadata associated with taskfile to be transferred
2808 * Fill PCI IDE PRD (scatter-gather) table with segments
2809 * associated with the current disk command.
2812 * spin_lock_irqsave(host_set lock)
2815 static void ata_fill_sg(struct ata_queued_cmd *qc)
2817 struct ata_port *ap = qc->ap;
2818 struct scatterlist *sg;
2821 WARN_ON(qc->__sg == NULL);
2822 WARN_ON(qc->n_elem == 0 && qc->pad_len == 0);
2825 ata_for_each_sg(sg, qc) {
2829 /* determine if physical DMA addr spans 64K boundary.
2830 * Note h/w doesn't support 64-bit, so we unconditionally
2831 * truncate dma_addr_t to u32.
2833 addr = (u32) sg_dma_address(sg);
2834 sg_len = sg_dma_len(sg);
2837 offset = addr & 0xffff;
2839 if ((offset + sg_len) > 0x10000)
2840 len = 0x10000 - offset;
2842 ap->prd[idx].addr = cpu_to_le32(addr);
2843 ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff);
2844 VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
2853 ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
2856 * ata_check_atapi_dma - Check whether ATAPI DMA can be supported
2857 * @qc: Metadata associated with taskfile to check
2859 * Allow low-level driver to filter ATA PACKET commands, returning
2860 * a status indicating whether or not it is OK to use DMA for the
2861 * supplied PACKET command.
2864 * spin_lock_irqsave(host_set lock)
2866 * RETURNS: 0 when ATAPI DMA can be used
2869 int ata_check_atapi_dma(struct ata_queued_cmd *qc)
2871 struct ata_port *ap = qc->ap;
2872 int rc = 0; /* Assume ATAPI DMA is OK by default */
2874 if (ap->ops->check_atapi_dma)
2875 rc = ap->ops->check_atapi_dma(qc);
2880 * ata_qc_prep - Prepare taskfile for submission
2881 * @qc: Metadata associated with taskfile to be prepared
2883 * Prepare ATA taskfile for submission.
2886 * spin_lock_irqsave(host_set lock)
2888 void ata_qc_prep(struct ata_queued_cmd *qc)
2890 if (!(qc->flags & ATA_QCFLAG_DMAMAP))
2896 void ata_noop_qc_prep(struct ata_queued_cmd *qc) { }
2899 * ata_sg_init_one - Associate command with memory buffer
2900 * @qc: Command to be associated
2901 * @buf: Memory buffer
2902 * @buflen: Length of memory buffer, in bytes.
2904 * Initialize the data-related elements of queued_cmd @qc
2905 * to point to a single memory buffer, @buf of byte length @buflen.
2908 * spin_lock_irqsave(host_set lock)
2911 void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
2913 struct scatterlist *sg;
2915 qc->flags |= ATA_QCFLAG_SINGLE;
2917 memset(&qc->sgent, 0, sizeof(qc->sgent));
2918 qc->__sg = &qc->sgent;
2920 qc->orig_n_elem = 1;
2924 sg_init_one(sg, buf, buflen);
2928 * ata_sg_init - Associate command with scatter-gather table.
2929 * @qc: Command to be associated
2930 * @sg: Scatter-gather table.
2931 * @n_elem: Number of elements in s/g table.
2933 * Initialize the data-related elements of queued_cmd @qc
2934 * to point to a scatter-gather table @sg, containing @n_elem
2938 * spin_lock_irqsave(host_set lock)
2941 void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
2942 unsigned int n_elem)
2944 qc->flags |= ATA_QCFLAG_SG;
2946 qc->n_elem = n_elem;
2947 qc->orig_n_elem = n_elem;
2951 * ata_sg_setup_one - DMA-map the memory buffer associated with a command.
2952 * @qc: Command with memory buffer to be mapped.
2954 * DMA-map the memory buffer associated with queued_cmd @qc.
2957 * spin_lock_irqsave(host_set lock)
2960 * Zero on success, negative on error.
2963 static int ata_sg_setup_one(struct ata_queued_cmd *qc)
2965 struct ata_port *ap = qc->ap;
2966 int dir = qc->dma_dir;
2967 struct scatterlist *sg = qc->__sg;
2968 dma_addr_t dma_address;
2971 /* we must lengthen transfers to end on a 32-bit boundary */
2972 qc->pad_len = sg->length & 3;
2974 void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
2975 struct scatterlist *psg = &qc->pad_sgent;
2977 WARN_ON(qc->dev->class != ATA_DEV_ATAPI);
2979 memset(pad_buf, 0, ATA_DMA_PAD_SZ);
2981 if (qc->tf.flags & ATA_TFLAG_WRITE)
2982 memcpy(pad_buf, qc->buf_virt + sg->length - qc->pad_len,
2985 sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ);
2986 sg_dma_len(psg) = ATA_DMA_PAD_SZ;
2988 sg->length -= qc->pad_len;
2989 if (sg->length == 0)
2992 DPRINTK("padding done, sg->length=%u pad_len=%u\n",
2993 sg->length, qc->pad_len);
3001 dma_address = dma_map_single(ap->dev, qc->buf_virt,
3003 if (dma_mapping_error(dma_address)) {
3005 sg->length += qc->pad_len;
3009 sg_dma_address(sg) = dma_address;
3010 sg_dma_len(sg) = sg->length;
3013 DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg),
3014 qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
3020 * ata_sg_setup - DMA-map the scatter-gather table associated with a command.
3021 * @qc: Command with scatter-gather table to be mapped.
3023 * DMA-map the scatter-gather table associated with queued_cmd @qc.
3026 * spin_lock_irqsave(host_set lock)
3029 * Zero on success, negative on error.
3033 static int ata_sg_setup(struct ata_queued_cmd *qc)
3035 struct ata_port *ap = qc->ap;
3036 struct scatterlist *sg = qc->__sg;
3037 struct scatterlist *lsg = &sg[qc->n_elem - 1];
3038 int n_elem, pre_n_elem, dir, trim_sg = 0;
3040 VPRINTK("ENTER, ata%u\n", ap->id);
3041 WARN_ON(!(qc->flags & ATA_QCFLAG_SG));
3043 /* we must lengthen transfers to end on a 32-bit boundary */
3044 qc->pad_len = lsg->length & 3;
3046 void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
3047 struct scatterlist *psg = &qc->pad_sgent;
3048 unsigned int offset;
3050 WARN_ON(qc->dev->class != ATA_DEV_ATAPI);
3052 memset(pad_buf, 0, ATA_DMA_PAD_SZ);
3055 * psg->page/offset are used to copy to-be-written
3056 * data in this function or read data in ata_sg_clean.
3058 offset = lsg->offset + lsg->length - qc->pad_len;
3059 psg->page = nth_page(lsg->page, offset >> PAGE_SHIFT);
3060 psg->offset = offset_in_page(offset);
3062 if (qc->tf.flags & ATA_TFLAG_WRITE) {
3063 void *addr = kmap_atomic(psg->page, KM_IRQ0);
3064 memcpy(pad_buf, addr + psg->offset, qc->pad_len);
3065 kunmap_atomic(addr, KM_IRQ0);
3068 sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ);
3069 sg_dma_len(psg) = ATA_DMA_PAD_SZ;
3071 lsg->length -= qc->pad_len;
3072 if (lsg->length == 0)
3075 DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n",
3076 qc->n_elem - 1, lsg->length, qc->pad_len);
3079 pre_n_elem = qc->n_elem;
3080 if (trim_sg && pre_n_elem)
3089 n_elem = dma_map_sg(ap->dev, sg, pre_n_elem, dir);
3091 /* restore last sg */
3092 lsg->length += qc->pad_len;
3096 DPRINTK("%d sg elements mapped\n", n_elem);
3099 qc->n_elem = n_elem;
3105 * ata_poll_qc_complete - turn irq back on and finish qc
3106 * @qc: Command to complete
3107 * @err_mask: ATA status register content
3110 * None. (grabs host lock)
3113 void ata_poll_qc_complete(struct ata_queued_cmd *qc)
3115 struct ata_port *ap = qc->ap;
3116 unsigned long flags;
3118 spin_lock_irqsave(&ap->host_set->lock, flags);
3119 ap->flags &= ~ATA_FLAG_NOINTR;
3121 ata_qc_complete(qc);
3122 spin_unlock_irqrestore(&ap->host_set->lock, flags);
3126 * ata_pio_poll - poll using PIO, depending on current state
3127 * @ap: the target ata_port
3130 * None. (executing in kernel thread context)
3133 * timeout value to use
3136 static unsigned long ata_pio_poll(struct ata_port *ap)
3138 struct ata_queued_cmd *qc;
3140 unsigned int poll_state = HSM_ST_UNKNOWN;
3141 unsigned int reg_state = HSM_ST_UNKNOWN;
3143 qc = ata_qc_from_tag(ap, ap->active_tag);
3144 WARN_ON(qc == NULL);
3146 switch (ap->hsm_task_state) {
3149 poll_state = HSM_ST_POLL;
3153 case HSM_ST_LAST_POLL:
3154 poll_state = HSM_ST_LAST_POLL;
3155 reg_state = HSM_ST_LAST;
3162 status = ata_chk_status(ap);
3163 if (status & ATA_BUSY) {
3164 if (time_after(jiffies, ap->pio_task_timeout)) {
3165 qc->err_mask |= AC_ERR_TIMEOUT;
3166 ap->hsm_task_state = HSM_ST_TMOUT;
3169 ap->hsm_task_state = poll_state;
3170 return ATA_SHORT_PAUSE;
3173 ap->hsm_task_state = reg_state;
3178 * ata_pio_complete - check if drive is busy or idle
3179 * @ap: the target ata_port
3182 * None. (executing in kernel thread context)
3185 * Non-zero if qc completed, zero otherwise.
3188 static int ata_pio_complete (struct ata_port *ap)
3190 struct ata_queued_cmd *qc;
3194 * This is purely heuristic. This is a fast path. Sometimes when
3195 * we enter, BSY will be cleared in a chk-status or two. If not,
3196 * the drive is probably seeking or something. Snooze for a couple
3197 * msecs, then chk-status again. If still busy, fall back to
3198 * HSM_ST_POLL state.
3200 drv_stat = ata_busy_wait(ap, ATA_BUSY, 10);
3201 if (drv_stat & ATA_BUSY) {
3203 drv_stat = ata_busy_wait(ap, ATA_BUSY, 10);
3204 if (drv_stat & ATA_BUSY) {
3205 ap->hsm_task_state = HSM_ST_LAST_POLL;
3206 ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
3211 qc = ata_qc_from_tag(ap, ap->active_tag);
3212 WARN_ON(qc == NULL);
3214 drv_stat = ata_wait_idle(ap);
3215 if (!ata_ok(drv_stat)) {
3216 qc->err_mask |= __ac_err_mask(drv_stat);
3217 ap->hsm_task_state = HSM_ST_ERR;
3221 ap->hsm_task_state = HSM_ST_IDLE;
3223 WARN_ON(qc->err_mask);
3224 ata_poll_qc_complete(qc);
3226 /* another command may start at this point */
3233 * swap_buf_le16 - swap halves of 16-bit words in place
3234 * @buf: Buffer to swap
3235 * @buf_words: Number of 16-bit words in buffer.
3237 * Swap halves of 16-bit words if needed to convert from
3238 * little-endian byte order to native cpu byte order, or
3242 * Inherited from caller.
3244 void swap_buf_le16(u16 *buf, unsigned int buf_words)
3249 for (i = 0; i < buf_words; i++)
3250 buf[i] = le16_to_cpu(buf[i]);
3251 #endif /* __BIG_ENDIAN */
3255 * ata_mmio_data_xfer - Transfer data by MMIO
3256 * @ap: port to read/write
3258 * @buflen: buffer length
3259 * @write_data: read/write
3261 * Transfer data from/to the device data register by MMIO.
3264 * Inherited from caller.
3267 static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
3268 unsigned int buflen, int write_data)
3271 unsigned int words = buflen >> 1;
3272 u16 *buf16 = (u16 *) buf;
3273 void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr;
3275 /* Transfer multiple of 2 bytes */
3277 for (i = 0; i < words; i++)
3278 writew(le16_to_cpu(buf16[i]), mmio);
3280 for (i = 0; i < words; i++)
3281 buf16[i] = cpu_to_le16(readw(mmio));
3284 /* Transfer trailing 1 byte, if any. */
3285 if (unlikely(buflen & 0x01)) {
3286 u16 align_buf[1] = { 0 };
3287 unsigned char *trailing_buf = buf + buflen - 1;
3290 memcpy(align_buf, trailing_buf, 1);
3291 writew(le16_to_cpu(align_buf[0]), mmio);
3293 align_buf[0] = cpu_to_le16(readw(mmio));
3294 memcpy(trailing_buf, align_buf, 1);
3300 * ata_pio_data_xfer - Transfer data by PIO
3301 * @ap: port to read/write
3303 * @buflen: buffer length
3304 * @write_data: read/write
3306 * Transfer data from/to the device data register by PIO.
3309 * Inherited from caller.
3312 static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
3313 unsigned int buflen, int write_data)
3315 unsigned int words = buflen >> 1;
3317 /* Transfer multiple of 2 bytes */
3319 outsw(ap->ioaddr.data_addr, buf, words);
3321 insw(ap->ioaddr.data_addr, buf, words);
3323 /* Transfer trailing 1 byte, if any. */
3324 if (unlikely(buflen & 0x01)) {
3325 u16 align_buf[1] = { 0 };
3326 unsigned char *trailing_buf = buf + buflen - 1;
3329 memcpy(align_buf, trailing_buf, 1);
3330 outw(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr);
3332 align_buf[0] = cpu_to_le16(inw(ap->ioaddr.data_addr));
3333 memcpy(trailing_buf, align_buf, 1);
3339 * ata_data_xfer - Transfer data from/to the data register.
3340 * @ap: port to read/write
3342 * @buflen: buffer length
3343 * @do_write: read/write
3345 * Transfer data from/to the device data register.
3348 * Inherited from caller.
3351 static void ata_data_xfer(struct ata_port *ap, unsigned char *buf,
3352 unsigned int buflen, int do_write)
3354 /* Make the crap hardware pay the costs not the good stuff */
3355 if (unlikely(ap->flags & ATA_FLAG_IRQ_MASK)) {
3356 unsigned long flags;
3357 local_irq_save(flags);
3358 if (ap->flags & ATA_FLAG_MMIO)
3359 ata_mmio_data_xfer(ap, buf, buflen, do_write);
3361 ata_pio_data_xfer(ap, buf, buflen, do_write);
3362 local_irq_restore(flags);
3364 if (ap->flags & ATA_FLAG_MMIO)
3365 ata_mmio_data_xfer(ap, buf, buflen, do_write);
3367 ata_pio_data_xfer(ap, buf, buflen, do_write);
3372 * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data.
3373 * @qc: Command on going
3375 * Transfer ATA_SECT_SIZE of data from/to the ATA device.
3378 * Inherited from caller.
3381 static void ata_pio_sector(struct ata_queued_cmd *qc)
3383 int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
3384 struct scatterlist *sg = qc->__sg;
3385 struct ata_port *ap = qc->ap;
3387 unsigned int offset;
3390 if (qc->cursect == (qc->nsect - 1))
3391 ap->hsm_task_state = HSM_ST_LAST;
3393 page = sg[qc->cursg].page;
3394 offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE;
3396 /* get the current page and offset */
3397 page = nth_page(page, (offset >> PAGE_SHIFT));
3398 offset %= PAGE_SIZE;
3400 buf = kmap(page) + offset;
3405 if ((qc->cursg_ofs * ATA_SECT_SIZE) == (&sg[qc->cursg])->length) {
3410 DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
3412 /* do the actual data transfer */
3413 do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
3414 ata_data_xfer(ap, buf, ATA_SECT_SIZE, do_write);
3420 * __atapi_pio_bytes - Transfer data from/to the ATAPI device.
3421 * @qc: Command on going
3422 * @bytes: number of bytes
3424 * Transfer Transfer data from/to the ATAPI device.
3427 * Inherited from caller.
3431 static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
3433 int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
3434 struct scatterlist *sg = qc->__sg;
3435 struct ata_port *ap = qc->ap;
3438 unsigned int offset, count;
3440 if (qc->curbytes + bytes >= qc->nbytes)
3441 ap->hsm_task_state = HSM_ST_LAST;
3444 if (unlikely(qc->cursg >= qc->n_elem)) {
3446 * The end of qc->sg is reached and the device expects
3447 * more data to transfer. In order not to overrun qc->sg
3448 * and fulfill length specified in the byte count register,
3449 * - for read case, discard trailing data from the device
3450 * - for write case, padding zero data to the device
3452 u16 pad_buf[1] = { 0 };
3453 unsigned int words = bytes >> 1;
3456 if (words) /* warning if bytes > 1 */
3457 printk(KERN_WARNING "ata%u: %u bytes trailing data\n",
3460 for (i = 0; i < words; i++)
3461 ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write);
3463 ap->hsm_task_state = HSM_ST_LAST;
3467 sg = &qc->__sg[qc->cursg];
3470 offset = sg->offset + qc->cursg_ofs;
3472 /* get the current page and offset */
3473 page = nth_page(page, (offset >> PAGE_SHIFT));
3474 offset %= PAGE_SIZE;
3476 /* don't overrun current sg */
3477 count = min(sg->length - qc->cursg_ofs, bytes);
3479 /* don't cross page boundaries */
3480 count = min(count, (unsigned int)PAGE_SIZE - offset);
3482 buf = kmap(page) + offset;
3485 qc->curbytes += count;
3486 qc->cursg_ofs += count;
3488 if (qc->cursg_ofs == sg->length) {
3493 DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
3495 /* do the actual data transfer */
3496 ata_data_xfer(ap, buf, count, do_write);
3505 * atapi_pio_bytes - Transfer data from/to the ATAPI device.
3506 * @qc: Command on going
3508 * Transfer Transfer data from/to the ATAPI device.
3511 * Inherited from caller.
3514 static void atapi_pio_bytes(struct ata_queued_cmd *qc)
3516 struct ata_port *ap = qc->ap;
3517 struct ata_device *dev = qc->dev;
3518 unsigned int ireason, bc_lo, bc_hi, bytes;
3519 int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0;
3521 ap->ops->tf_read(ap, &qc->tf);
3522 ireason = qc->tf.nsect;
3523 bc_lo = qc->tf.lbam;
3524 bc_hi = qc->tf.lbah;
3525 bytes = (bc_hi << 8) | bc_lo;
3527 /* shall be cleared to zero, indicating xfer of data */
3528 if (ireason & (1 << 0))
3531 /* make sure transfer direction matches expected */
3532 i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0;
3533 if (do_write != i_write)
3536 __atapi_pio_bytes(qc, bytes);
3541 printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n",
3542 ap->id, dev->devno);
3543 qc->err_mask |= AC_ERR_HSM;
3544 ap->hsm_task_state = HSM_ST_ERR;
3548 * ata_pio_block - start PIO on a block
3549 * @ap: the target ata_port
3552 * None. (executing in kernel thread context)
3555 static void ata_pio_block(struct ata_port *ap)
3557 struct ata_queued_cmd *qc;
3561 * This is purely heuristic. This is a fast path.
3562 * Sometimes when we enter, BSY will be cleared in
3563 * a chk-status or two. If not, the drive is probably seeking
3564 * or something. Snooze for a couple msecs, then
3565 * chk-status again. If still busy, fall back to
3566 * HSM_ST_POLL state.
3568 status = ata_busy_wait(ap, ATA_BUSY, 5);
3569 if (status & ATA_BUSY) {
3571 status = ata_busy_wait(ap, ATA_BUSY, 10);
3572 if (status & ATA_BUSY) {
3573 ap->hsm_task_state = HSM_ST_POLL;
3574 ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
3579 qc = ata_qc_from_tag(ap, ap->active_tag);
3580 WARN_ON(qc == NULL);
3583 if (status & (ATA_ERR | ATA_DF)) {
3584 qc->err_mask |= AC_ERR_DEV;
3585 ap->hsm_task_state = HSM_ST_ERR;
3589 /* transfer data if any */
3590 if (is_atapi_taskfile(&qc->tf)) {
3591 /* DRQ=0 means no more data to transfer */
3592 if ((status & ATA_DRQ) == 0) {
3593 ap->hsm_task_state = HSM_ST_LAST;
3597 atapi_pio_bytes(qc);
3599 /* handle BSY=0, DRQ=0 as error */
3600 if ((status & ATA_DRQ) == 0) {
3601 qc->err_mask |= AC_ERR_HSM;
3602 ap->hsm_task_state = HSM_ST_ERR;
3610 static void ata_pio_error(struct ata_port *ap)
3612 struct ata_queued_cmd *qc;
3614 qc = ata_qc_from_tag(ap, ap->active_tag);
3615 WARN_ON(qc == NULL);
3617 if (qc->tf.command != ATA_CMD_PACKET)
3618 printk(KERN_WARNING "ata%u: PIO error\n", ap->id);
3620 /* make sure qc->err_mask is available to
3621 * know what's wrong and recover
3623 WARN_ON(qc->err_mask == 0);
3625 ap->hsm_task_state = HSM_ST_IDLE;
3627 ata_poll_qc_complete(qc);
3630 static void ata_pio_task(void *_data)
3632 struct ata_port *ap = _data;
3633 unsigned long timeout;
3640 switch (ap->hsm_task_state) {
3649 qc_completed = ata_pio_complete(ap);
3653 case HSM_ST_LAST_POLL:
3654 timeout = ata_pio_poll(ap);
3664 ata_port_queue_task(ap, ata_pio_task, ap, timeout);
3665 else if (!qc_completed)
3670 * atapi_packet_task - Write CDB bytes to hardware
3671 * @_data: Port to which ATAPI device is attached.
3673 * When device has indicated its readiness to accept
3674 * a CDB, this function is called. Send the CDB.
3675 * If DMA is to be performed, exit immediately.
3676 * Otherwise, we are in polling mode, so poll
3677 * status under operation succeeds or fails.
3680 * Kernel thread context (may sleep)
3683 static void atapi_packet_task(void *_data)
3685 struct ata_port *ap = _data;
3686 struct ata_queued_cmd *qc;
3689 qc = ata_qc_from_tag(ap, ap->active_tag);
3690 WARN_ON(qc == NULL);
3691 WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
3693 /* sleep-wait for BSY to clear */
3694 DPRINTK("busy wait\n");
3695 if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) {
3696 qc->err_mask |= AC_ERR_TIMEOUT;
3700 /* make sure DRQ is set */
3701 status = ata_chk_status(ap);
3702 if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) {
3703 qc->err_mask |= AC_ERR_HSM;
3708 DPRINTK("send cdb\n");
3709 WARN_ON(qc->dev->cdb_len < 12);
3711 if (qc->tf.protocol == ATA_PROT_ATAPI_DMA ||
3712 qc->tf.protocol == ATA_PROT_ATAPI_NODATA) {
3713 unsigned long flags;
3715 /* Once we're done issuing command and kicking bmdma,
3716 * irq handler takes over. To not lose irq, we need
3717 * to clear NOINTR flag before sending cdb, but
3718 * interrupt handler shouldn't be invoked before we're
3719 * finished. Hence, the following locking.
3721 spin_lock_irqsave(&ap->host_set->lock, flags);
3722 ap->flags &= ~ATA_FLAG_NOINTR;
3723 ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
3724 if (qc->tf.protocol == ATA_PROT_ATAPI_DMA)
3725 ap->ops->bmdma_start(qc); /* initiate bmdma */
3726 spin_unlock_irqrestore(&ap->host_set->lock, flags);
3728 ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
3730 /* PIO commands are handled by polling */
3731 ap->hsm_task_state = HSM_ST;
3732 ata_port_queue_task(ap, ata_pio_task, ap, 0);
3738 ata_poll_qc_complete(qc);
3742 * ata_qc_timeout - Handle timeout of queued command
3743 * @qc: Command that timed out
3745 * Some part of the kernel (currently, only the SCSI layer)
3746 * has noticed that the active command on port @ap has not
3747 * completed after a specified length of time. Handle this
3748 * condition by disabling DMA (if necessary) and completing
3749 * transactions, with error if necessary.
3751 * This also handles the case of the "lost interrupt", where
3752 * for some reason (possibly hardware bug, possibly driver bug)
3753 * an interrupt was not delivered to the driver, even though the
3754 * transaction completed successfully.
3757 * Inherited from SCSI layer (none, can sleep)
3760 static void ata_qc_timeout(struct ata_queued_cmd *qc)
3762 struct ata_port *ap = qc->ap;
3763 struct ata_host_set *host_set = ap->host_set;
3764 u8 host_stat = 0, drv_stat;
3765 unsigned long flags;
3769 ap->hsm_task_state = HSM_ST_IDLE;
3771 spin_lock_irqsave(&host_set->lock, flags);
3773 switch (qc->tf.protocol) {
3776 case ATA_PROT_ATAPI_DMA:
3777 host_stat = ap->ops->bmdma_status(ap);
3779 /* before we do anything else, clear DMA-Start bit */
3780 ap->ops->bmdma_stop(qc);
3786 drv_stat = ata_chk_status(ap);
3788 /* ack bmdma irq events */
3789 ap->ops->irq_clear(ap);
3791 printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n",
3792 ap->id, qc->tf.command, drv_stat, host_stat);
3794 /* complete taskfile transaction */
3795 qc->err_mask |= ac_err_mask(drv_stat);
3799 spin_unlock_irqrestore(&host_set->lock, flags);
3801 ata_eh_qc_complete(qc);
3807 * ata_eng_timeout - Handle timeout of queued command
3808 * @ap: Port on which timed-out command is active
3810 * Some part of the kernel (currently, only the SCSI layer)
3811 * has noticed that the active command on port @ap has not
3812 * completed after a specified length of time. Handle this
3813 * condition by disabling DMA (if necessary) and completing
3814 * transactions, with error if necessary.
3816 * This also handles the case of the "lost interrupt", where
3817 * for some reason (possibly hardware bug, possibly driver bug)
3818 * an interrupt was not delivered to the driver, even though the
3819 * transaction completed successfully.
3822 * Inherited from SCSI layer (none, can sleep)
3825 void ata_eng_timeout(struct ata_port *ap)
3829 ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag));
3835 * ata_qc_new - Request an available ATA command, for queueing
3836 * @ap: Port associated with device @dev
3837 * @dev: Device from whom we request an available command structure
3843 static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
3845 struct ata_queued_cmd *qc = NULL;
3848 for (i = 0; i < ATA_MAX_QUEUE; i++)
3849 if (!test_and_set_bit(i, &ap->qactive)) {
3850 qc = ata_qc_from_tag(ap, i);
3861 * ata_qc_new_init - Request an available ATA command, and initialize it
3862 * @ap: Port associated with device @dev
3863 * @dev: Device from whom we request an available command structure
3869 struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
3870 struct ata_device *dev)
3872 struct ata_queued_cmd *qc;
3874 qc = ata_qc_new(ap);
3887 * ata_qc_free - free unused ata_queued_cmd
3888 * @qc: Command to complete
3890 * Designed to free unused ata_queued_cmd object
3891 * in case something prevents using it.
3894 * spin_lock_irqsave(host_set lock)
3896 void ata_qc_free(struct ata_queued_cmd *qc)
3898 struct ata_port *ap = qc->ap;
3901 WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
3905 if (likely(ata_tag_valid(tag))) {
3906 if (tag == ap->active_tag)
3907 ap->active_tag = ATA_TAG_POISON;
3908 qc->tag = ATA_TAG_POISON;
3909 clear_bit(tag, &ap->qactive);
3913 void __ata_qc_complete(struct ata_queued_cmd *qc)
3915 WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
3916 WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
3918 if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
3921 /* atapi: mark qc as inactive to prevent the interrupt handler
3922 * from completing the command twice later, before the error handler
3923 * is called. (when rc != 0 and atapi request sense is needed)
3925 qc->flags &= ~ATA_QCFLAG_ACTIVE;
3927 /* call completion callback */
3928 qc->complete_fn(qc);
3931 static inline int ata_should_dma_map(struct ata_queued_cmd *qc)
3933 struct ata_port *ap = qc->ap;
3935 switch (qc->tf.protocol) {
3937 case ATA_PROT_ATAPI_DMA:
3940 case ATA_PROT_ATAPI:
3942 if (ap->flags & ATA_FLAG_PIO_DMA)
3955 * ata_qc_issue - issue taskfile to device
3956 * @qc: command to issue to device
3958 * Prepare an ATA command to submission to device.
3959 * This includes mapping the data into a DMA-able
3960 * area, filling in the S/G table, and finally
3961 * writing the taskfile to hardware, starting the command.
3964 * spin_lock_irqsave(host_set lock)
3967 * Zero on success, AC_ERR_* mask on failure
3970 unsigned int ata_qc_issue(struct ata_queued_cmd *qc)
3972 struct ata_port *ap = qc->ap;
3974 if (ata_should_dma_map(qc)) {
3975 if (qc->flags & ATA_QCFLAG_SG) {
3976 if (ata_sg_setup(qc))
3978 } else if (qc->flags & ATA_QCFLAG_SINGLE) {
3979 if (ata_sg_setup_one(qc))
3983 qc->flags &= ~ATA_QCFLAG_DMAMAP;
3986 ap->ops->qc_prep(qc);
3988 qc->ap->active_tag = qc->tag;
3989 qc->flags |= ATA_QCFLAG_ACTIVE;
3991 return ap->ops->qc_issue(qc);
3994 qc->flags &= ~ATA_QCFLAG_DMAMAP;
3995 return AC_ERR_SYSTEM;
4000 * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
4001 * @qc: command to issue to device
4003 * Using various libata functions and hooks, this function
4004 * starts an ATA command. ATA commands are grouped into
4005 * classes called "protocols", and issuing each type of protocol
4006 * is slightly different.
4008 * May be used as the qc_issue() entry in ata_port_operations.
4011 * spin_lock_irqsave(host_set lock)
4014 * Zero on success, AC_ERR_* mask on failure
4017 unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
4019 struct ata_port *ap = qc->ap;
4021 ata_dev_select(ap, qc->dev->devno, 1, 0);
4023 switch (qc->tf.protocol) {
4024 case ATA_PROT_NODATA:
4025 ata_tf_to_host(ap, &qc->tf);
4029 ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
4030 ap->ops->bmdma_setup(qc); /* set up bmdma */
4031 ap->ops->bmdma_start(qc); /* initiate bmdma */
4034 case ATA_PROT_PIO: /* load tf registers, initiate polling pio */
4035 ata_qc_set_polling(qc);
4036 ata_tf_to_host(ap, &qc->tf);
4037 ap->hsm_task_state = HSM_ST;
4038 ata_port_queue_task(ap, ata_pio_task, ap, 0);
4041 case ATA_PROT_ATAPI:
4042 ata_qc_set_polling(qc);
4043 ata_tf_to_host(ap, &qc->tf);
4044 ata_port_queue_task(ap, atapi_packet_task, ap, 0);
4047 case ATA_PROT_ATAPI_NODATA:
4048 ap->flags |= ATA_FLAG_NOINTR;
4049 ata_tf_to_host(ap, &qc->tf);
4050 ata_port_queue_task(ap, atapi_packet_task, ap, 0);
4053 case ATA_PROT_ATAPI_DMA:
4054 ap->flags |= ATA_FLAG_NOINTR;
4055 ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
4056 ap->ops->bmdma_setup(qc); /* set up bmdma */
4057 ata_port_queue_task(ap, atapi_packet_task, ap, 0);
4062 return AC_ERR_SYSTEM;
4069 * ata_host_intr - Handle host interrupt for given (port, task)
4070 * @ap: Port on which interrupt arrived (possibly...)
4071 * @qc: Taskfile currently active in engine
4073 * Handle host interrupt for given queued command. Currently,
4074 * only DMA interrupts are handled. All other commands are
4075 * handled via polling with interrupts disabled (nIEN bit).
4078 * spin_lock_irqsave(host_set lock)
4081 * One if interrupt was handled, zero if not (shared irq).
4084 inline unsigned int ata_host_intr (struct ata_port *ap,
4085 struct ata_queued_cmd *qc)
4087 u8 status, host_stat;
4089 switch (qc->tf.protocol) {
4092 case ATA_PROT_ATAPI_DMA:
4093 case ATA_PROT_ATAPI:
4094 /* check status of DMA engine */
4095 host_stat = ap->ops->bmdma_status(ap);
4096 VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat);
4098 /* if it's not our irq... */
4099 if (!(host_stat & ATA_DMA_INTR))
4102 /* before we do anything else, clear DMA-Start bit */
4103 ap->ops->bmdma_stop(qc);
4107 case ATA_PROT_ATAPI_NODATA:
4108 case ATA_PROT_NODATA:
4109 /* check altstatus */
4110 status = ata_altstatus(ap);
4111 if (status & ATA_BUSY)
4114 /* check main status, clearing INTRQ */
4115 status = ata_chk_status(ap);
4116 if (unlikely(status & ATA_BUSY))
4118 DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
4119 ap->id, qc->tf.protocol, status);
4121 /* ack bmdma irq events */
4122 ap->ops->irq_clear(ap);
4124 /* complete taskfile transaction */
4125 qc->err_mask |= ac_err_mask(status);
4126 ata_qc_complete(qc);
4133 return 1; /* irq handled */
4136 ap->stats.idle_irq++;
4139 if ((ap->stats.idle_irq % 1000) == 0) {
4140 ata_irq_ack(ap, 0); /* debug trap */
4141 printk(KERN_WARNING "ata%d: irq trap\n", ap->id);
4145 return 0; /* irq not handled */
4149 * ata_interrupt - Default ATA host interrupt handler
4150 * @irq: irq line (unused)
4151 * @dev_instance: pointer to our ata_host_set information structure
4154 * Default interrupt handler for PCI IDE devices. Calls
4155 * ata_host_intr() for each port that is not disabled.
4158 * Obtains host_set lock during operation.
4161 * IRQ_NONE or IRQ_HANDLED.
4164 irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
4166 struct ata_host_set *host_set = dev_instance;
4168 unsigned int handled = 0;
4169 unsigned long flags;
4171 /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
4172 spin_lock_irqsave(&host_set->lock, flags);
4174 for (i = 0; i < host_set->n_ports; i++) {
4175 struct ata_port *ap;
4177 ap = host_set->ports[i];
4179 !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {
4180 struct ata_queued_cmd *qc;
4182 qc = ata_qc_from_tag(ap, ap->active_tag);
4183 if (qc && (!(qc->tf.ctl & ATA_NIEN)) &&
4184 (qc->flags & ATA_QCFLAG_ACTIVE))
4185 handled |= ata_host_intr(ap, qc);
4189 spin_unlock_irqrestore(&host_set->lock, flags);
4191 return IRQ_RETVAL(handled);
4196 * Execute a 'simple' command, that only consists of the opcode 'cmd' itself,
4197 * without filling any other registers
4199 static int ata_do_simple_cmd(struct ata_port *ap, struct ata_device *dev,
4202 struct ata_taskfile tf;
4205 ata_tf_init(ap, &tf, dev->devno);
4208 tf.flags |= ATA_TFLAG_DEVICE;
4209 tf.protocol = ATA_PROT_NODATA;
4211 err = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0);
4213 printk(KERN_ERR "%s: ata command failed: %d\n",
4219 static int ata_flush_cache(struct ata_port *ap, struct ata_device *dev)
4223 if (!ata_try_flush_cache(dev))
4226 if (ata_id_has_flush_ext(dev->id))
4227 cmd = ATA_CMD_FLUSH_EXT;
4229 cmd = ATA_CMD_FLUSH;
4231 return ata_do_simple_cmd(ap, dev, cmd);
4234 static int ata_standby_drive(struct ata_port *ap, struct ata_device *dev)
4236 return ata_do_simple_cmd(ap, dev, ATA_CMD_STANDBYNOW1);
4239 static int ata_start_drive(struct ata_port *ap, struct ata_device *dev)
4241 return ata_do_simple_cmd(ap, dev, ATA_CMD_IDLEIMMEDIATE);
4245 * ata_device_resume - wakeup a previously suspended devices
4246 * @ap: port the device is connected to
4247 * @dev: the device to resume
4249 * Kick the drive back into action, by sending it an idle immediate
4250 * command and making sure its transfer mode matches between drive
4254 int ata_device_resume(struct ata_port *ap, struct ata_device *dev)
4256 if (ap->flags & ATA_FLAG_SUSPENDED) {
4257 ap->flags &= ~ATA_FLAG_SUSPENDED;
4260 if (!ata_dev_present(dev))
4262 if (dev->class == ATA_DEV_ATA)
4263 ata_start_drive(ap, dev);
4269 * ata_device_suspend - prepare a device for suspend
4270 * @ap: port the device is connected to
4271 * @dev: the device to suspend
4273 * Flush the cache on the drive, if appropriate, then issue a
4274 * standbynow command.
4276 int ata_device_suspend(struct ata_port *ap, struct ata_device *dev, pm_message_t state)
4278 if (!ata_dev_present(dev))
4280 if (dev->class == ATA_DEV_ATA)
4281 ata_flush_cache(ap, dev);
4283 if (state.event != PM_EVENT_FREEZE)
4284 ata_standby_drive(ap, dev);
4285 ap->flags |= ATA_FLAG_SUSPENDED;
4290 * ata_port_start - Set port up for dma.
4291 * @ap: Port to initialize
4293 * Called just after data structures for each port are
4294 * initialized. Allocates space for PRD table.
4296 * May be used as the port_start() entry in ata_port_operations.
4299 * Inherited from caller.
4302 int ata_port_start (struct ata_port *ap)
4304 struct device *dev = ap->dev;
4307 ap->prd = dma_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma, GFP_KERNEL);
4311 rc = ata_pad_alloc(ap, dev);
4313 dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
4317 DPRINTK("prd alloc, virt %p, dma %llx\n", ap->prd, (unsigned long long) ap->prd_dma);
4324 * ata_port_stop - Undo ata_port_start()
4325 * @ap: Port to shut down
4327 * Frees the PRD table.
4329 * May be used as the port_stop() entry in ata_port_operations.
4332 * Inherited from caller.
4335 void ata_port_stop (struct ata_port *ap)
4337 struct device *dev = ap->dev;
4339 dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
4340 ata_pad_free(ap, dev);
4343 void ata_host_stop (struct ata_host_set *host_set)
4345 if (host_set->mmio_base)
4346 iounmap(host_set->mmio_base);
4351 * ata_host_remove - Unregister SCSI host structure with upper layers
4352 * @ap: Port to unregister
4353 * @do_unregister: 1 if we fully unregister, 0 to just stop the port
4356 * Inherited from caller.
4359 static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
4361 struct Scsi_Host *sh = ap->host;
4366 scsi_remove_host(sh);
4368 ap->ops->port_stop(ap);
4372 * ata_host_init - Initialize an ata_port structure
4373 * @ap: Structure to initialize
4374 * @host: associated SCSI mid-layer structure
4375 * @host_set: Collection of hosts to which @ap belongs
4376 * @ent: Probe information provided by low-level driver
4377 * @port_no: Port number associated with this ata_port
4379 * Initialize a new ata_port structure, and its associated
4383 * Inherited from caller.
4386 static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
4387 struct ata_host_set *host_set,
4388 const struct ata_probe_ent *ent, unsigned int port_no)
4394 host->max_channel = 1;
4395 host->unique_id = ata_unique_id++;
4396 host->max_cmd_len = 12;
4398 ap->flags = ATA_FLAG_PORT_DISABLED;
4399 ap->id = host->unique_id;
4401 ap->ctl = ATA_DEVCTL_OBS;
4402 ap->host_set = host_set;
4404 ap->port_no = port_no;
4406 ent->legacy_mode ? ent->hard_port_no : port_no;
4407 ap->pio_mask = ent->pio_mask;
4408 ap->mwdma_mask = ent->mwdma_mask;
4409 ap->udma_mask = ent->udma_mask;
4410 ap->flags |= ent->host_flags;
4411 ap->ops = ent->port_ops;
4412 ap->cbl = ATA_CBL_NONE;
4413 ap->active_tag = ATA_TAG_POISON;
4414 ap->last_ctl = 0xFF;
4416 INIT_WORK(&ap->port_task, NULL, NULL);
4417 INIT_LIST_HEAD(&ap->eh_done_q);
4419 for (i = 0; i < ATA_MAX_DEVICES; i++) {
4420 struct ata_device *dev = &ap->device[i];
4422 dev->pio_mask = UINT_MAX;
4423 dev->mwdma_mask = UINT_MAX;
4424 dev->udma_mask = UINT_MAX;
4428 ap->stats.unhandled_irq = 1;
4429 ap->stats.idle_irq = 1;
4432 memcpy(&ap->ioaddr, &ent->port[port_no], sizeof(struct ata_ioports));
4436 * ata_host_add - Attach low-level ATA driver to system
4437 * @ent: Information provided by low-level driver
4438 * @host_set: Collections of ports to which we add
4439 * @port_no: Port number associated with this host
4441 * Attach low-level ATA driver to system.
4444 * PCI/etc. bus probe sem.
4447 * New ata_port on success, for NULL on error.
4450 static struct ata_port * ata_host_add(const struct ata_probe_ent *ent,
4451 struct ata_host_set *host_set,
4452 unsigned int port_no)
4454 struct Scsi_Host *host;
4455 struct ata_port *ap;
4460 if (!ent->port_ops->probe_reset &&
4461 !(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) {
4462 printk(KERN_ERR "ata%u: no reset mechanism available\n",
4467 host = scsi_host_alloc(ent->sht, sizeof(struct ata_port));
4471 host->transportt = &ata_scsi_transport_template;
4473 ap = (struct ata_port *) &host->hostdata[0];
4475 ata_host_init(ap, host, host_set, ent, port_no);
4477 rc = ap->ops->port_start(ap);
4484 scsi_host_put(host);
4489 * ata_device_add - Register hardware device with ATA and SCSI layers
4490 * @ent: Probe information describing hardware device to be registered
4492 * This function processes the information provided in the probe
4493 * information struct @ent, allocates the necessary ATA and SCSI
4494 * host information structures, initializes them, and registers
4495 * everything with requisite kernel subsystems.
4497 * This function requests irqs, probes the ATA bus, and probes
4501 * PCI/etc. bus probe sem.
4504 * Number of ports registered. Zero on error (no ports registered).
4507 int ata_device_add(const struct ata_probe_ent *ent)
4509 unsigned int count = 0, i;
4510 struct device *dev = ent->dev;
4511 struct ata_host_set *host_set;
4514 /* alloc a container for our list of ATA ports (buses) */
4515 host_set = kzalloc(sizeof(struct ata_host_set) +
4516 (ent->n_ports * sizeof(void *)), GFP_KERNEL);
4519 spin_lock_init(&host_set->lock);
4521 host_set->dev = dev;
4522 host_set->n_ports = ent->n_ports;
4523 host_set->irq = ent->irq;
4524 host_set->mmio_base = ent->mmio_base;
4525 host_set->private_data = ent->private_data;
4526 host_set->ops = ent->port_ops;
4528 /* register each port bound to this device */
4529 for (i = 0; i < ent->n_ports; i++) {
4530 struct ata_port *ap;
4531 unsigned long xfer_mode_mask;
4533 ap = ata_host_add(ent, host_set, i);
4537 host_set->ports[i] = ap;
4538 xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) |
4539 (ap->mwdma_mask << ATA_SHIFT_MWDMA) |
4540 (ap->pio_mask << ATA_SHIFT_PIO);
4542 /* print per-port info to dmesg */
4543 printk(KERN_INFO "ata%u: %cATA max %s cmd 0x%lX ctl 0x%lX "
4544 "bmdma 0x%lX irq %lu\n",
4546 ap->flags & ATA_FLAG_SATA ? 'S' : 'P',
4547 ata_mode_string(xfer_mode_mask),
4548 ap->ioaddr.cmd_addr,
4549 ap->ioaddr.ctl_addr,
4550 ap->ioaddr.bmdma_addr,
4554 host_set->ops->irq_clear(ap);
4561 /* obtain irq, that is shared between channels */
4562 if (request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags,
4563 DRV_NAME, host_set))
4566 /* perform each probe synchronously */
4567 DPRINTK("probe begin\n");
4568 for (i = 0; i < count; i++) {
4569 struct ata_port *ap;
4572 ap = host_set->ports[i];
4574 DPRINTK("ata%u: bus probe begin\n", ap->id);
4575 rc = ata_bus_probe(ap);
4576 DPRINTK("ata%u: bus probe end\n", ap->id);
4579 /* FIXME: do something useful here?
4580 * Current libata behavior will
4581 * tear down everything when
4582 * the module is removed
4583 * or the h/w is unplugged.
4587 rc = scsi_add_host(ap->host, dev);
4589 printk(KERN_ERR "ata%u: scsi_add_host failed\n",
4591 /* FIXME: do something useful here */
4592 /* FIXME: handle unconditional calls to
4593 * scsi_scan_host and ata_host_remove, below,
4599 /* probes are done, now scan each port's disk(s) */
4600 DPRINTK("host probe begin\n");
4601 for (i = 0; i < count; i++) {
4602 struct ata_port *ap = host_set->ports[i];
4604 ata_scsi_scan_host(ap);
4607 dev_set_drvdata(dev, host_set);
4609 VPRINTK("EXIT, returning %u\n", ent->n_ports);
4610 return ent->n_ports; /* success */
4613 for (i = 0; i < count; i++) {
4614 ata_host_remove(host_set->ports[i], 1);
4615 scsi_host_put(host_set->ports[i]->host);
4619 VPRINTK("EXIT, returning 0\n");
4624 * ata_host_set_remove - PCI layer callback for device removal
4625 * @host_set: ATA host set that was removed
4627 * Unregister all objects associated with this host set. Free those
4631 * Inherited from calling layer (may sleep).
4634 void ata_host_set_remove(struct ata_host_set *host_set)
4636 struct ata_port *ap;
4639 for (i = 0; i < host_set->n_ports; i++) {
4640 ap = host_set->ports[i];
4641 scsi_remove_host(ap->host);
4644 free_irq(host_set->irq, host_set);
4646 for (i = 0; i < host_set->n_ports; i++) {
4647 ap = host_set->ports[i];
4649 ata_scsi_release(ap->host);
4651 if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) {
4652 struct ata_ioports *ioaddr = &ap->ioaddr;
4654 if (ioaddr->cmd_addr == 0x1f0)
4655 release_region(0x1f0, 8);
4656 else if (ioaddr->cmd_addr == 0x170)
4657 release_region(0x170, 8);
4660 scsi_host_put(ap->host);
4663 if (host_set->ops->host_stop)
4664 host_set->ops->host_stop(host_set);
4670 * ata_scsi_release - SCSI layer callback hook for host unload
4671 * @host: libata host to be unloaded
4673 * Performs all duties necessary to shut down a libata port...
4674 * Kill port kthread, disable port, and release resources.
4677 * Inherited from SCSI layer.
4683 int ata_scsi_release(struct Scsi_Host *host)
4685 struct ata_port *ap = (struct ata_port *) &host->hostdata[0];
4690 ap->ops->port_disable(ap);
4691 ata_host_remove(ap, 0);
4692 for (i = 0; i < ATA_MAX_DEVICES; i++)
4693 kfree(ap->device[i].id);
4700 * ata_std_ports - initialize ioaddr with standard port offsets.
4701 * @ioaddr: IO address structure to be initialized
4703 * Utility function which initializes data_addr, error_addr,
4704 * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
4705 * device_addr, status_addr, and command_addr to standard offsets
4706 * relative to cmd_addr.
4708 * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
4711 void ata_std_ports(struct ata_ioports *ioaddr)
4713 ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
4714 ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR;
4715 ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE;
4716 ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT;
4717 ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL;
4718 ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM;
4719 ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH;
4720 ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE;
4721 ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS;
4722 ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
4728 void ata_pci_host_stop (struct ata_host_set *host_set)
4730 struct pci_dev *pdev = to_pci_dev(host_set->dev);
4732 pci_iounmap(pdev, host_set->mmio_base);
4736 * ata_pci_remove_one - PCI layer callback for device removal
4737 * @pdev: PCI device that was removed
4739 * PCI layer indicates to libata via this hook that
4740 * hot-unplug or module unload event has occurred.
4741 * Handle this by unregistering all objects associated
4742 * with this PCI device. Free those objects. Then finally
4743 * release PCI resources and disable device.
4746 * Inherited from PCI layer (may sleep).
4749 void ata_pci_remove_one (struct pci_dev *pdev)
4751 struct device *dev = pci_dev_to_dev(pdev);
4752 struct ata_host_set *host_set = dev_get_drvdata(dev);
4754 ata_host_set_remove(host_set);
4755 pci_release_regions(pdev);
4756 pci_disable_device(pdev);
4757 dev_set_drvdata(dev, NULL);
4760 /* move to PCI subsystem */
4761 int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
4763 unsigned long tmp = 0;
4765 switch (bits->width) {
4768 pci_read_config_byte(pdev, bits->reg, &tmp8);
4774 pci_read_config_word(pdev, bits->reg, &tmp16);
4780 pci_read_config_dword(pdev, bits->reg, &tmp32);
4791 return (tmp == bits->val) ? 1 : 0;
4794 int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state)
4796 pci_save_state(pdev);
4797 pci_disable_device(pdev);
4798 pci_set_power_state(pdev, PCI_D3hot);
4802 int ata_pci_device_resume(struct pci_dev *pdev)
4804 pci_set_power_state(pdev, PCI_D0);
4805 pci_restore_state(pdev);
4806 pci_enable_device(pdev);
4807 pci_set_master(pdev);
4810 #endif /* CONFIG_PCI */
4813 static int __init ata_init(void)
4815 ata_wq = create_workqueue("ata");
4819 printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
4823 static void __exit ata_exit(void)
4825 destroy_workqueue(ata_wq);
4828 module_init(ata_init);
4829 module_exit(ata_exit);
4831 static unsigned long ratelimit_time;
4832 static spinlock_t ata_ratelimit_lock = SPIN_LOCK_UNLOCKED;
4834 int ata_ratelimit(void)
4837 unsigned long flags;
4839 spin_lock_irqsave(&ata_ratelimit_lock, flags);
4841 if (time_after(jiffies, ratelimit_time)) {
4843 ratelimit_time = jiffies + (HZ/5);
4847 spin_unlock_irqrestore(&ata_ratelimit_lock, flags);
4853 * libata is essentially a library of internal helper functions for
4854 * low-level ATA host controller drivers. As such, the API/ABI is
4855 * likely to change as new drivers are added and updated.
4856 * Do not depend on ABI/API stability.
4859 EXPORT_SYMBOL_GPL(ata_std_bios_param);
4860 EXPORT_SYMBOL_GPL(ata_std_ports);
4861 EXPORT_SYMBOL_GPL(ata_device_add);
4862 EXPORT_SYMBOL_GPL(ata_host_set_remove);
4863 EXPORT_SYMBOL_GPL(ata_sg_init);
4864 EXPORT_SYMBOL_GPL(ata_sg_init_one);
4865 EXPORT_SYMBOL_GPL(__ata_qc_complete);
4866 EXPORT_SYMBOL_GPL(ata_qc_issue_prot);
4867 EXPORT_SYMBOL_GPL(ata_eng_timeout);
4868 EXPORT_SYMBOL_GPL(ata_tf_load);
4869 EXPORT_SYMBOL_GPL(ata_tf_read);
4870 EXPORT_SYMBOL_GPL(ata_noop_dev_select);
4871 EXPORT_SYMBOL_GPL(ata_std_dev_select);
4872 EXPORT_SYMBOL_GPL(ata_tf_to_fis);
4873 EXPORT_SYMBOL_GPL(ata_tf_from_fis);
4874 EXPORT_SYMBOL_GPL(ata_check_status);
4875 EXPORT_SYMBOL_GPL(ata_altstatus);
4876 EXPORT_SYMBOL_GPL(ata_exec_command);
4877 EXPORT_SYMBOL_GPL(ata_port_start);
4878 EXPORT_SYMBOL_GPL(ata_port_stop);
4879 EXPORT_SYMBOL_GPL(ata_host_stop);
4880 EXPORT_SYMBOL_GPL(ata_interrupt);
4881 EXPORT_SYMBOL_GPL(ata_qc_prep);
4882 EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
4883 EXPORT_SYMBOL_GPL(ata_bmdma_setup);
4884 EXPORT_SYMBOL_GPL(ata_bmdma_start);
4885 EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
4886 EXPORT_SYMBOL_GPL(ata_bmdma_status);
4887 EXPORT_SYMBOL_GPL(ata_bmdma_stop);
4888 EXPORT_SYMBOL_GPL(ata_port_probe);
4889 EXPORT_SYMBOL_GPL(sata_phy_reset);
4890 EXPORT_SYMBOL_GPL(__sata_phy_reset);
4891 EXPORT_SYMBOL_GPL(ata_bus_reset);
4892 EXPORT_SYMBOL_GPL(ata_std_probeinit);
4893 EXPORT_SYMBOL_GPL(ata_std_softreset);
4894 EXPORT_SYMBOL_GPL(sata_std_hardreset);
4895 EXPORT_SYMBOL_GPL(ata_std_postreset);
4896 EXPORT_SYMBOL_GPL(ata_std_probe_reset);
4897 EXPORT_SYMBOL_GPL(ata_drive_probe_reset);
4898 EXPORT_SYMBOL_GPL(ata_dev_revalidate);
4899 EXPORT_SYMBOL_GPL(ata_dev_classify);
4900 EXPORT_SYMBOL_GPL(ata_dev_pair);
4901 EXPORT_SYMBOL_GPL(ata_port_disable);
4902 EXPORT_SYMBOL_GPL(ata_ratelimit);
4903 EXPORT_SYMBOL_GPL(ata_busy_sleep);
4904 EXPORT_SYMBOL_GPL(ata_port_queue_task);
4905 EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
4906 EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
4907 EXPORT_SYMBOL_GPL(ata_scsi_error);
4908 EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
4909 EXPORT_SYMBOL_GPL(ata_scsi_release);
4910 EXPORT_SYMBOL_GPL(ata_host_intr);
4911 EXPORT_SYMBOL_GPL(ata_id_string);
4912 EXPORT_SYMBOL_GPL(ata_id_c_string);
4913 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
4914 EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
4915 EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
4917 EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
4918 EXPORT_SYMBOL_GPL(ata_timing_compute);
4919 EXPORT_SYMBOL_GPL(ata_timing_merge);
4922 EXPORT_SYMBOL_GPL(pci_test_config_bits);
4923 EXPORT_SYMBOL_GPL(ata_pci_host_stop);
4924 EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
4925 EXPORT_SYMBOL_GPL(ata_pci_init_one);
4926 EXPORT_SYMBOL_GPL(ata_pci_remove_one);
4927 EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
4928 EXPORT_SYMBOL_GPL(ata_pci_device_resume);
4929 EXPORT_SYMBOL_GPL(ata_pci_default_filter);
4930 EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
4931 #endif /* CONFIG_PCI */
4933 EXPORT_SYMBOL_GPL(ata_device_suspend);
4934 EXPORT_SYMBOL_GPL(ata_device_resume);
4935 EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
4936 EXPORT_SYMBOL_GPL(ata_scsi_device_resume);