2 * Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il>
3 * Copyright (C) 2004-2005 Bartlomiej Zolnierkiewicz
7 * Emulation of a SCSI host adapter for IDE ATAPI devices.
9 * With this driver, one can use the Linux SCSI drivers instead of the
10 * native IDE ATAPI drivers.
12 * Ver 0.1 Dec 3 96 Initial version.
13 * Ver 0.2 Jan 26 97 Fixed bug in cleanup_module() and added emulation
14 * of MODE_SENSE_6/MODE_SELECT_6 for cdroms. Thanks
15 * to Janos Farkas for pointing this out.
16 * Avoid using bitfields in structures for m68k.
17 * Added Scatter/Gather and DMA support.
18 * Ver 0.4 Dec 7 97 Add support for ATAPI PD/CD drives.
19 * Use variable timeout for each command.
20 * Ver 0.5 Jan 2 98 Fix previous PD/CD support.
21 * Allow disabling of SCSI-6 to SCSI-10 transformation.
22 * Ver 0.6 Jan 27 98 Allow disabling of SCSI command translation layer
23 * for access through /dev/sg.
24 * Fix MODE_SENSE_6/MODE_SELECT_6/INQUIRY translation.
25 * Ver 0.7 Dec 04 98 Ignore commands where lun != 0 to avoid multiple
26 * detection of devices with CONFIG_SCSI_MULTI_LUN
27 * Ver 0.8 Feb 05 99 Optical media need translation too. Reverse 0.7.
28 * Ver 0.9 Jul 04 99 Fix a bug in SG_SET_TRANSFORM.
29 * Ver 0.91 Jun 10 02 Fix "off by one" error in transforms
30 * Ver 0.92 Dec 31 02 Implement new SCSI mid level API
33 #define IDESCSI_VERSION "0.92"
35 #include <linux/module.h>
36 #include <linux/types.h>
37 #include <linux/string.h>
38 #include <linux/kernel.h>
40 #include <linux/ioport.h>
41 #include <linux/blkdev.h>
42 #include <linux/errno.h>
43 #include <linux/hdreg.h>
44 #include <linux/slab.h>
45 #include <linux/ide.h>
46 #include <linux/scatterlist.h>
47 #include <linux/delay.h>
48 #include <linux/mutex.h>
49 #include <linux/bitops.h>
52 #include <asm/uaccess.h>
54 #include <scsi/scsi.h>
55 #include <scsi/scsi_cmnd.h>
56 #include <scsi/scsi_device.h>
57 #include <scsi/scsi_host.h>
58 #include <scsi/scsi_tcq.h>
61 #define IDESCSI_DEBUG_LOG 0
64 * SCSI command transformation layer
66 #define IDESCSI_SG_TRANSFORM 1 /* /dev/sg transformation */
71 #define IDESCSI_LOG_CMD 0 /* Log SCSI commands */
73 typedef struct ide_scsi_obj {
77 struct Scsi_Host *host;
79 struct ide_atapi_pc *pc; /* Current packet command */
80 unsigned long flags; /* Status/Action flags */
81 unsigned long transform; /* SCSI cmd translation layer */
82 unsigned long log; /* log flags */
85 static DEFINE_MUTEX(idescsi_ref_mutex);
86 /* Set by module param to skip cd */
87 static int idescsi_nocd;
89 #define ide_scsi_g(disk) \
90 container_of((disk)->private_data, struct ide_scsi_obj, driver)
92 static struct ide_scsi_obj *ide_scsi_get(struct gendisk *disk)
94 struct ide_scsi_obj *scsi = NULL;
96 mutex_lock(&idescsi_ref_mutex);
97 scsi = ide_scsi_g(disk);
99 scsi_host_get(scsi->host);
100 mutex_unlock(&idescsi_ref_mutex);
104 static void ide_scsi_put(struct ide_scsi_obj *scsi)
106 mutex_lock(&idescsi_ref_mutex);
107 scsi_host_put(scsi->host);
108 mutex_unlock(&idescsi_ref_mutex);
111 static inline idescsi_scsi_t *scsihost_to_idescsi(struct Scsi_Host *host)
113 return (idescsi_scsi_t*) (&host[1]);
116 static inline idescsi_scsi_t *drive_to_idescsi(ide_drive_t *ide_drive)
118 return scsihost_to_idescsi(ide_drive->driver_data);
122 * Per ATAPI device status bits.
124 #define IDESCSI_DRQ_INTERRUPT 0 /* DRQ interrupt device */
129 #define IDESCSI_PC_RQ 90
132 * PIO data transfer routines using the scatter gather table.
134 static void idescsi_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
137 ide_hwif_t *hwif = drive->hwif;
142 count = min(pc->sg->length - pc->b_count, bcount);
143 if (PageHighMem(sg_page(pc->sg))) {
146 local_irq_save(flags);
147 buf = kmap_atomic(sg_page(pc->sg), KM_IRQ0) +
149 hwif->input_data(drive, NULL, buf + pc->b_count, count);
150 kunmap_atomic(buf - pc->sg->offset, KM_IRQ0);
151 local_irq_restore(flags);
153 buf = sg_virt(pc->sg);
154 hwif->input_data(drive, NULL, buf + pc->b_count, count);
156 bcount -= count; pc->b_count += count;
157 if (pc->b_count == pc->sg->length) {
160 pc->sg = sg_next(pc->sg);
166 printk (KERN_ERR "ide-scsi: scatter gather table too small, discarding data\n");
167 ide_pad_transfer(drive, 0, bcount);
171 static void idescsi_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
174 ide_hwif_t *hwif = drive->hwif;
179 count = min(pc->sg->length - pc->b_count, bcount);
180 if (PageHighMem(sg_page(pc->sg))) {
183 local_irq_save(flags);
184 buf = kmap_atomic(sg_page(pc->sg), KM_IRQ0) +
186 hwif->output_data(drive, NULL, buf + pc->b_count, count);
187 kunmap_atomic(buf - pc->sg->offset, KM_IRQ0);
188 local_irq_restore(flags);
190 buf = sg_virt(pc->sg);
191 hwif->output_data(drive, NULL, buf + pc->b_count, count);
193 bcount -= count; pc->b_count += count;
194 if (pc->b_count == pc->sg->length) {
197 pc->sg = sg_next(pc->sg);
203 printk (KERN_ERR "ide-scsi: scatter gather table too small, padding with zeros\n");
204 ide_pad_transfer(drive, 1, bcount);
208 static void ide_scsi_hex_dump(u8 *data, int len)
210 print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0);
213 static int idescsi_check_condition(ide_drive_t *drive,
214 struct request *failed_cmd)
216 idescsi_scsi_t *scsi = drive_to_idescsi(drive);
217 struct ide_atapi_pc *pc;
221 /* stuff a sense request in front of our current request */
222 pc = kzalloc(sizeof(struct ide_atapi_pc), GFP_ATOMIC);
223 rq = kmalloc(sizeof(struct request), GFP_ATOMIC);
224 buf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_ATOMIC);
225 if (!pc || !rq || !buf) {
231 blk_rq_init(NULL, rq);
232 rq->special = (char *) pc;
235 pc->c[0] = REQUEST_SENSE;
236 pc->c[4] = pc->req_xfer = pc->buf_size = SCSI_SENSE_BUFFERSIZE;
237 rq->cmd_type = REQ_TYPE_SENSE;
238 rq->cmd_flags |= REQ_PREEMPT;
239 pc->timeout = jiffies + WAIT_READY;
240 /* NOTE! Save the failed packet command in "rq->buffer" */
241 rq->buffer = (void *) failed_cmd->special;
242 pc->scsi_cmd = ((struct ide_atapi_pc *) failed_cmd->special)->scsi_cmd;
243 if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
244 printk ("ide-scsi: %s: queue cmd = ", drive->name);
245 ide_scsi_hex_dump(pc->c, 6);
247 rq->rq_disk = scsi->disk;
248 ide_do_drive_cmd(drive, rq);
252 static int idescsi_end_request(ide_drive_t *, int, int);
254 static ide_startstop_t
255 idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
257 ide_hwif_t *hwif = drive->hwif;
259 if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
261 hwif->OUTBSYNC(hwif, WIN_IDLEIMMEDIATE,
262 hwif->io_ports.command_addr);
266 idescsi_end_request(drive, 0, 0);
271 static ide_startstop_t
272 idescsi_atapi_abort(ide_drive_t *drive, struct request *rq)
274 #if IDESCSI_DEBUG_LOG
275 printk(KERN_WARNING "idescsi_atapi_abort called for %lu\n",
276 ((struct ide_atapi_pc *) rq->special)->scsi_cmd->serial_number);
278 rq->errors |= ERROR_MAX;
280 idescsi_end_request(drive, 0, 0);
285 static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
287 idescsi_scsi_t *scsi = drive_to_idescsi(drive);
288 struct request *rq = HWGROUP(drive)->rq;
289 struct ide_atapi_pc *pc = (struct ide_atapi_pc *) rq->special;
290 int log = test_bit(IDESCSI_LOG_CMD, &scsi->log);
291 struct Scsi_Host *host;
292 int errors = rq->errors;
295 if (!blk_special_request(rq) && !blk_sense_request(rq)) {
296 ide_end_request(drive, uptodate, nrsecs);
299 ide_end_drive_cmd (drive, 0, 0);
300 if (blk_sense_request(rq)) {
301 struct ide_atapi_pc *opc = (struct ide_atapi_pc *) rq->buffer;
303 printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number);
304 ide_scsi_hex_dump(pc->buf, 16);
306 memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buf,
307 SCSI_SENSE_BUFFERSIZE);
313 pc->scsi_cmd->result = (CHECK_CONDITION << 1) |
314 (((pc->flags & PC_FLAG_TIMEDOUT) ?
317 } else if (pc->flags & PC_FLAG_TIMEDOUT) {
319 printk (KERN_WARNING "ide-scsi: %s: timed out for %lu\n",
320 drive->name, pc->scsi_cmd->serial_number);
321 pc->scsi_cmd->result = DID_TIME_OUT << 16;
322 } else if (errors >= ERROR_MAX) {
323 pc->scsi_cmd->result = DID_ERROR << 16;
325 printk ("ide-scsi: %s: I/O error for %lu\n", drive->name, pc->scsi_cmd->serial_number);
328 printk ("ide-scsi: %s: check condition for %lu\n", drive->name, pc->scsi_cmd->serial_number);
329 if (!idescsi_check_condition(drive, rq))
330 /* we started a request sense, so we'll be back, exit for now */
332 pc->scsi_cmd->result = (CHECK_CONDITION << 1) | (DID_OK << 16);
334 pc->scsi_cmd->result = DID_OK << 16;
336 host = pc->scsi_cmd->device->host;
337 spin_lock_irqsave(host->host_lock, flags);
338 pc->done(pc->scsi_cmd);
339 spin_unlock_irqrestore(host->host_lock, flags);
346 static inline unsigned long get_timeout(struct ide_atapi_pc *pc)
348 return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies);
351 static int idescsi_expiry(ide_drive_t *drive)
353 idescsi_scsi_t *scsi = drive_to_idescsi(drive);
354 struct ide_atapi_pc *pc = scsi->pc;
356 #if IDESCSI_DEBUG_LOG
357 printk(KERN_WARNING "idescsi_expiry called for %lu at %lu\n", pc->scsi_cmd->serial_number, jiffies);
359 pc->flags |= PC_FLAG_TIMEDOUT;
361 return 0; /* we do not want the ide subsystem to retry */
365 * Our interrupt handler.
367 static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
369 idescsi_scsi_t *scsi = drive_to_idescsi(drive);
370 ide_hwif_t *hwif = drive->hwif;
371 struct ide_atapi_pc *pc = scsi->pc;
372 struct request *rq = pc->rq;
377 #if IDESCSI_DEBUG_LOG
378 printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n");
379 #endif /* IDESCSI_DEBUG_LOG */
381 if (pc->flags & PC_FLAG_TIMEDOUT) {
382 #if IDESCSI_DEBUG_LOG
383 printk(KERN_WARNING "idescsi_pc_intr: got timed out packet %lu at %lu\n",
384 pc->scsi_cmd->serial_number, jiffies);
386 /* end this request now - scsi should retry it*/
387 idescsi_end_request (drive, 1, 0);
390 if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
391 #if IDESCSI_DEBUG_LOG
392 printk ("ide-scsi: %s: DMA complete\n", drive->name);
393 #endif /* IDESCSI_DEBUG_LOG */
394 pc->xferred = pc->req_xfer;
395 (void)hwif->dma_ops->dma_end(drive);
398 /* Clear the interrupt */
399 stat = ide_read_status(drive);
401 if ((stat & DRQ_STAT) == 0) {
402 /* No more interrupts */
403 if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
404 printk(KERN_INFO "Packet command completed, %d bytes"
405 " transferred\n", pc->xferred);
406 pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
407 local_irq_enable_in_hardirq();
410 idescsi_end_request (drive, 1, 0);
413 if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
414 pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
415 printk(KERN_ERR "%s: The device wants to issue more interrupts "
416 "in DMA mode\n", drive->name);
418 return ide_do_reset(drive);
420 bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) |
421 hwif->INB(hwif->io_ports.lbam_addr);
422 ireason = hwif->INB(hwif->io_ports.nsect_addr);
425 printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n");
426 return ide_do_reset (drive);
429 temp = pc->xferred + bcount;
430 if (temp > pc->req_xfer) {
431 if (temp > pc->buf_size) {
432 printk(KERN_ERR "ide-scsi: The scsi wants to "
433 "send us more data than expected "
434 "- discarding data\n");
435 temp = pc->buf_size - pc->xferred;
437 pc->flags &= ~PC_FLAG_WRITING;
439 idescsi_input_buffers(drive, pc,
442 hwif->input_data(drive, NULL,
444 printk(KERN_ERR "ide-scsi: transferred"
450 ide_pad_transfer(drive, 0, bcount - temp);
451 ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
454 #if IDESCSI_DEBUG_LOG
455 printk (KERN_NOTICE "ide-scsi: The scsi wants to send us more data than expected - allowing transfer\n");
456 #endif /* IDESCSI_DEBUG_LOG */
460 pc->flags &= ~PC_FLAG_WRITING;
462 idescsi_input_buffers(drive, pc, bcount);
464 hwif->input_data(drive, NULL, pc->cur_pos, bcount);
466 pc->flags |= PC_FLAG_WRITING;
468 idescsi_output_buffers(drive, pc, bcount);
470 hwif->output_data(drive, NULL, pc->cur_pos, bcount);
472 /* Update the current position */
473 pc->xferred += bcount;
474 pc->cur_pos += bcount;
476 /* And set the interrupt handler again */
477 ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
481 static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive)
483 ide_hwif_t *hwif = drive->hwif;
484 idescsi_scsi_t *scsi = drive_to_idescsi(drive);
485 struct ide_atapi_pc *pc = scsi->pc;
486 ide_startstop_t startstop;
489 if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) {
490 printk(KERN_ERR "ide-scsi: Strange, packet command "
491 "initiated yet DRQ isn't asserted\n");
494 ireason = hwif->INB(hwif->io_ports.nsect_addr);
495 if ((ireason & CD) == 0 || (ireason & IO)) {
496 printk(KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while "
497 "issuing a packet command\n");
498 return ide_do_reset (drive);
500 BUG_ON(HWGROUP(drive)->handler != NULL);
501 /* Set the interrupt routine */
502 ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
504 if (pc->flags & PC_FLAG_DMA_OK) {
505 pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
506 hwif->dma_ops->dma_start(drive);
509 /* Send the actual packet */
510 hwif->output_data(drive, NULL, scsi->pc->c, 12);
515 static inline int idescsi_set_direction(struct ide_atapi_pc *pc)
518 case READ_6: case READ_10: case READ_12:
519 pc->flags &= ~PC_FLAG_WRITING;
521 case WRITE_6: case WRITE_10: case WRITE_12:
522 pc->flags |= PC_FLAG_WRITING;
529 static int idescsi_map_sg(ide_drive_t *drive, struct ide_atapi_pc *pc)
531 ide_hwif_t *hwif = drive->hwif;
532 struct scatterlist *sg, *scsi_sg;
535 if (!pc->req_xfer || pc->req_xfer % 1024)
538 if (idescsi_set_direction(pc))
542 scsi_sg = scsi_sglist(pc->scsi_cmd);
543 segments = scsi_sg_count(pc->scsi_cmd);
545 if (segments > hwif->sg_max_nents)
548 hwif->sg_nents = segments;
549 memcpy(sg, scsi_sg, sizeof(*sg) * segments);
554 static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive,
555 struct ide_atapi_pc *pc)
557 idescsi_scsi_t *scsi = drive_to_idescsi(drive);
558 ide_hwif_t *hwif = drive->hwif;
562 /* Set the current packet command */
564 /* We haven't transferred any data yet */
566 pc->cur_pos = pc->buf;
567 /* Request to transfer the entire buffer at once */
568 bcount = min(pc->req_xfer, 63 * 1024);
570 if (drive->using_dma && !idescsi_map_sg(drive, pc)) {
572 dma = !hwif->dma_ops->dma_setup(drive);
576 ide_pktcmd_tf_load(drive, 0, bcount, dma);
579 pc->flags |= PC_FLAG_DMA_OK;
581 if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) {
582 ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc,
583 get_timeout(pc), idescsi_expiry);
586 /* Issue the packet command */
587 ide_execute_pkt_cmd(drive);
588 return idescsi_transfer_pc(drive);
593 * idescsi_do_request is our request handling function.
595 static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *rq, sector_t block)
597 #if IDESCSI_DEBUG_LOG
598 printk (KERN_INFO "dev: %s, cmd: %x, errors: %d\n", rq->rq_disk->disk_name,rq->cmd[0],rq->errors);
599 printk (KERN_INFO "sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",rq->sector,rq->nr_sectors,rq->current_nr_sectors);
600 #endif /* IDESCSI_DEBUG_LOG */
602 if (blk_sense_request(rq) || blk_special_request(rq)) {
603 return idescsi_issue_pc(drive,
604 (struct ide_atapi_pc *) rq->special);
606 blk_dump_rq_flags(rq, "ide-scsi: unsup command");
607 idescsi_end_request (drive, 0, 0);
611 #ifdef CONFIG_IDE_PROC_FS
612 static void idescsi_add_settings(ide_drive_t *drive)
614 idescsi_scsi_t *scsi = drive_to_idescsi(drive);
617 * drive setting name read/write data type min max mul_factor div_factor data pointer set function
619 ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL);
620 ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL);
621 ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL);
622 ide_add_setting(drive, "transform", SETTING_RW, TYPE_INT, 0, 3, 1, 1, &scsi->transform, NULL);
623 ide_add_setting(drive, "log", SETTING_RW, TYPE_INT, 0, 1, 1, 1, &scsi->log, NULL);
626 static inline void idescsi_add_settings(ide_drive_t *drive) { ; }
630 * Driver initialization.
632 static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi)
634 if (drive->id && (drive->id->config & 0x0060) == 0x20)
635 set_bit (IDESCSI_DRQ_INTERRUPT, &scsi->flags);
636 clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform);
637 #if IDESCSI_DEBUG_LOG
638 set_bit(IDESCSI_LOG_CMD, &scsi->log);
639 #endif /* IDESCSI_DEBUG_LOG */
640 idescsi_add_settings(drive);
643 static void ide_scsi_remove(ide_drive_t *drive)
645 struct Scsi_Host *scsihost = drive->driver_data;
646 struct ide_scsi_obj *scsi = scsihost_to_idescsi(scsihost);
647 struct gendisk *g = scsi->disk;
649 scsi_remove_host(scsihost);
650 ide_proc_unregister_driver(drive, scsi->driver);
652 ide_unregister_region(g);
654 drive->driver_data = NULL;
655 g->private_data = NULL;
661 static int ide_scsi_probe(ide_drive_t *);
663 #ifdef CONFIG_IDE_PROC_FS
664 static ide_proc_entry_t idescsi_proc[] = {
665 { "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL },
666 { NULL, 0, NULL, NULL }
670 static ide_driver_t idescsi_driver = {
672 .owner = THIS_MODULE,
674 .bus = &ide_bus_type,
676 .probe = ide_scsi_probe,
677 .remove = ide_scsi_remove,
678 .version = IDESCSI_VERSION,
680 .supports_dsc_overlap = 0,
681 .do_request = idescsi_do_request,
682 .end_request = idescsi_end_request,
683 .error = idescsi_atapi_error,
684 .abort = idescsi_atapi_abort,
685 #ifdef CONFIG_IDE_PROC_FS
686 .proc = idescsi_proc,
690 static int idescsi_ide_open(struct inode *inode, struct file *filp)
692 struct gendisk *disk = inode->i_bdev->bd_disk;
693 struct ide_scsi_obj *scsi;
695 if (!(scsi = ide_scsi_get(disk)))
701 static int idescsi_ide_release(struct inode *inode, struct file *filp)
703 struct gendisk *disk = inode->i_bdev->bd_disk;
704 struct ide_scsi_obj *scsi = ide_scsi_g(disk);
711 static int idescsi_ide_ioctl(struct inode *inode, struct file *file,
712 unsigned int cmd, unsigned long arg)
714 struct block_device *bdev = inode->i_bdev;
715 struct ide_scsi_obj *scsi = ide_scsi_g(bdev->bd_disk);
716 return generic_ide_ioctl(scsi->drive, file, bdev, cmd, arg);
719 static struct block_device_operations idescsi_ops = {
720 .owner = THIS_MODULE,
721 .open = idescsi_ide_open,
722 .release = idescsi_ide_release,
723 .ioctl = idescsi_ide_ioctl,
726 static int idescsi_slave_configure(struct scsi_device * sdp)
728 /* Configure detected device */
729 sdp->use_10_for_rw = 1;
730 sdp->use_10_for_ms = 1;
731 scsi_adjust_queue_depth(sdp, MSG_SIMPLE_TAG, sdp->host->cmd_per_lun);
735 static const char *idescsi_info (struct Scsi_Host *host)
737 return "SCSI host adapter emulation for IDE ATAPI devices";
740 static int idescsi_ioctl (struct scsi_device *dev, int cmd, void __user *arg)
742 idescsi_scsi_t *scsi = scsihost_to_idescsi(dev->host);
744 if (cmd == SG_SET_TRANSFORM) {
746 set_bit(IDESCSI_SG_TRANSFORM, &scsi->transform);
748 clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform);
750 } else if (cmd == SG_GET_TRANSFORM)
751 return put_user(test_bit(IDESCSI_SG_TRANSFORM, &scsi->transform), (int __user *) arg);
755 static int idescsi_queue (struct scsi_cmnd *cmd,
756 void (*done)(struct scsi_cmnd *))
758 struct Scsi_Host *host = cmd->device->host;
759 idescsi_scsi_t *scsi = scsihost_to_idescsi(host);
760 ide_drive_t *drive = scsi->drive;
761 struct request *rq = NULL;
762 struct ide_atapi_pc *pc = NULL;
765 scmd_printk (KERN_ERR, cmd, "drive not present\n");
768 scsi = drive_to_idescsi(drive);
769 pc = kmalloc(sizeof(struct ide_atapi_pc), GFP_ATOMIC);
770 rq = kmalloc(sizeof(struct request), GFP_ATOMIC);
771 if (rq == NULL || pc == NULL) {
772 printk (KERN_ERR "ide-scsi: %s: out of memory\n", drive->name);
776 memset (pc->c, 0, 12);
779 memcpy (pc->c, cmd->cmnd, cmd->cmd_len);
781 pc->sg = scsi_sglist(cmd);
782 pc->sg_cnt = scsi_sg_count(cmd);
784 pc->req_xfer = pc->buf_size = scsi_bufflen(cmd);
787 pc->timeout = jiffies + cmd->timeout_per_command;
789 if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
790 printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
791 ide_scsi_hex_dump(cmd->cmnd, cmd->cmd_len);
792 if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) {
793 printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number);
794 ide_scsi_hex_dump(pc->c, 12);
798 blk_rq_init(NULL, rq);
799 rq->special = (char *) pc;
800 rq->cmd_type = REQ_TYPE_SPECIAL;
801 spin_unlock_irq(host->host_lock);
802 blk_execute_rq_nowait(drive->queue, scsi->disk, rq, 0, NULL);
803 spin_lock_irq(host->host_lock);
808 cmd->result = DID_ERROR << 16;
813 static int idescsi_eh_abort (struct scsi_cmnd *cmd)
815 idescsi_scsi_t *scsi = scsihost_to_idescsi(cmd->device->host);
816 ide_drive_t *drive = scsi->drive;
820 /* In idescsi_eh_abort we try to gently pry our command from the ide subsystem */
822 if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
823 printk (KERN_WARNING "ide-scsi: abort called for %lu\n", cmd->serial_number);
826 printk (KERN_WARNING "ide-scsi: Drive not set in idescsi_eh_abort\n");
831 /* First give it some more time, how much is "right" is hard to say :-( */
833 busy = ide_wait_not_busy(HWIF(drive), 100); /* FIXME - uses mdelay which causes latency? */
834 if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
835 printk (KERN_WARNING "ide-scsi: drive did%s become ready\n", busy?" not":"");
837 spin_lock_irq(&ide_lock);
839 /* If there is no pc running we're done (our interrupt took care of it) */
845 /* It's somewhere in flight. Does ide subsystem agree? */
846 if (scsi->pc->scsi_cmd->serial_number == cmd->serial_number && !busy &&
847 elv_queue_empty(drive->queue) && HWGROUP(drive)->rq != scsi->pc->rq) {
849 * FIXME - not sure this condition can ever occur
851 printk (KERN_ERR "ide-scsi: cmd aborted!\n");
853 if (blk_sense_request(scsi->pc->rq))
854 kfree(scsi->pc->buf);
863 spin_unlock_irq(&ide_lock);
865 if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
866 printk (KERN_WARNING "ide-scsi: abort returns %s\n", ret == SUCCESS?"success":"failed");
871 static int idescsi_eh_reset (struct scsi_cmnd *cmd)
874 idescsi_scsi_t *scsi = scsihost_to_idescsi(cmd->device->host);
875 ide_drive_t *drive = scsi->drive;
879 /* In idescsi_eh_reset we forcefully remove the command from the ide subsystem and reset the device. */
881 if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
882 printk (KERN_WARNING "ide-scsi: reset called for %lu\n", cmd->serial_number);
885 printk (KERN_WARNING "ide-scsi: Drive not set in idescsi_eh_reset\n");
890 spin_lock_irq(cmd->device->host->host_lock);
891 spin_lock(&ide_lock);
893 if (!scsi->pc || (req = scsi->pc->rq) != HWGROUP(drive)->rq || !HWGROUP(drive)->handler) {
894 printk (KERN_WARNING "ide-scsi: No active request in idescsi_eh_reset\n");
895 spin_unlock(&ide_lock);
896 spin_unlock_irq(cmd->device->host->host_lock);
900 /* kill current request */
901 if (__blk_end_request(req, -EIO, 0))
903 if (blk_sense_request(req))
904 kfree(scsi->pc->buf);
909 /* now nuke the drive queue */
910 while ((req = elv_next_request(drive->queue))) {
911 if (__blk_end_request(req, -EIO, 0))
915 HWGROUP(drive)->rq = NULL;
916 HWGROUP(drive)->handler = NULL;
917 HWGROUP(drive)->busy = 1; /* will set this to zero when ide reset finished */
918 spin_unlock(&ide_lock);
922 /* ide_do_reset starts a polling handler which restarts itself every 50ms until the reset finishes */
925 spin_unlock_irq(cmd->device->host->host_lock);
927 spin_lock_irq(cmd->device->host->host_lock);
928 } while ( HWGROUP(drive)->handler );
930 ready = drive_is_ready(drive);
931 HWGROUP(drive)->busy--;
933 printk (KERN_ERR "ide-scsi: reset failed!\n");
937 spin_unlock_irq(cmd->device->host->host_lock);
941 static int idescsi_bios(struct scsi_device *sdev, struct block_device *bdev,
942 sector_t capacity, int *parm)
944 idescsi_scsi_t *idescsi = scsihost_to_idescsi(sdev->host);
945 ide_drive_t *drive = idescsi->drive;
947 if (drive->bios_cyl && drive->bios_head && drive->bios_sect) {
948 parm[0] = drive->bios_head;
949 parm[1] = drive->bios_sect;
950 parm[2] = drive->bios_cyl;
955 static struct scsi_host_template idescsi_template = {
956 .module = THIS_MODULE,
958 .info = idescsi_info,
959 .slave_configure = idescsi_slave_configure,
960 .ioctl = idescsi_ioctl,
961 .queuecommand = idescsi_queue,
962 .eh_abort_handler = idescsi_eh_abort,
963 .eh_host_reset_handler = idescsi_eh_reset,
964 .bios_param = idescsi_bios,
970 .use_clustering = DISABLE_CLUSTERING,
972 .proc_name = "ide-scsi",
975 static int ide_scsi_probe(ide_drive_t *drive)
977 idescsi_scsi_t *idescsi;
978 struct Scsi_Host *host;
983 if (!warned && drive->media == ide_cdrom) {
984 printk(KERN_WARNING "ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device\n");
988 if (idescsi_nocd && drive->media == ide_cdrom)
991 if (!strstr("ide-scsi", drive->driver_req) ||
993 drive->media == ide_disk ||
994 !(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t))))
997 g = alloc_disk(1 << PARTN_BITS);
1001 ide_init_disk(g, drive);
1005 #if IDESCSI_DEBUG_LOG
1006 if (drive->id->last_lun)
1007 printk(KERN_NOTICE "%s: id->last_lun=%u\n", drive->name, drive->id->last_lun);
1009 if ((drive->id->last_lun & 0x7) != 7)
1010 host->max_lun = (drive->id->last_lun & 0x7) + 1;
1014 drive->driver_data = host;
1015 idescsi = scsihost_to_idescsi(host);
1016 idescsi->drive = drive;
1017 idescsi->driver = &idescsi_driver;
1018 idescsi->host = host;
1020 g->private_data = &idescsi->driver;
1021 ide_proc_register_driver(drive, &idescsi_driver);
1023 idescsi_setup(drive, idescsi);
1024 g->fops = &idescsi_ops;
1025 ide_register_region(g);
1026 err = scsi_add_host(host, &drive->gendev);
1028 scsi_scan_host(host);
1031 /* fall through on error */
1032 ide_unregister_region(g);
1033 ide_proc_unregister_driver(drive, &idescsi_driver);
1037 scsi_host_put(host);
1041 static int __init init_idescsi_module(void)
1043 return driver_register(&idescsi_driver.gen_driver);
1046 static void __exit exit_idescsi_module(void)
1048 driver_unregister(&idescsi_driver.gen_driver);
1051 module_param(idescsi_nocd, int, 0600);
1052 MODULE_PARM_DESC(idescsi_nocd, "Disable handling of CD-ROMs so they may be driven by ide-cd");
1053 module_init(init_idescsi_module);
1054 module_exit(exit_idescsi_module);
1055 MODULE_LICENSE("GPL");