2 # PCCARD (PCMCIA/CardBus) bus subsystem configuration
5 menu "PCCARD (PCMCIA/CardBus) support"
8 tristate "PCCard (PCMCIA/CardBus) support"
11 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
12 computer. These are credit-card size devices such as network cards,
13 modems or hard drives often used with laptops computers. There are
14 actually two varieties of these cards: 16 bit PCMCIA and 32 bit
17 To compile this driver as modules, choose M here: the
18 module will be called pcmcia_core.
23 bool "Enable PCCARD debugging"
25 Say Y here to enable PCMCIA subsystem debugging. You
26 will need to choose the debugging level either via the
27 kernel command line, or module options depending whether
28 you build the PCMCIA as modules.
30 The kernel command line options are:
31 pcmcia_core.pc_debug=N
33 sa11xx_core.pc_debug=N
35 The module option is called pc_debug=N
37 In all the above examples, N is the debugging verbosity
41 tristate "16-bit PCMCIA support"
45 This option enables support for 16-bit PCMCIA cards. Most older
46 PC-cards are such 16-bit PCMCIA cards, so unless you know you're
47 only using 32-bit CardBus cards, say Y or M here.
49 To use 16-bit PCMCIA cards, you will need supporting software in
50 most cases. (see the file <file:Documentation/Changes> for
51 location and details).
53 To compile this driver as modules, choose M here: the
54 module will be called pcmcia.
58 config PCMCIA_LOAD_CIS
59 bool "Load CIS updates from userspace (EXPERIMENTAL)"
60 depends on PCMCIA && EXPERIMENTAL
64 Some PCMCIA cards require an updated Card Information Structure (CIS)
65 to be loaded from userspace to work correctly. If you say Y here,
66 and your userspace is arranged correctly, this will be loaded
67 automatically using the in-kernel firmware loader and the hotplug
68 subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
73 bool "PCMCIA control ioctl (obsolete)"
77 If you say Y here, the deprecated ioctl interface to the PCMCIA
78 subsystem will be built. It is needed by cardmgr and cardctl
79 (pcmcia-cs) to function properly.
81 You should use the new pcmciautils package instead (see
82 <file:Documentation/Changes> for location and details).
87 bool "32-bit CardBus support"
91 CardBus is a bus mastering architecture for PC-cards, which allows
92 for 32 bit PC-cards (the original PCMCIA standard specifies only
93 a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
95 To use 32 bit PC-cards, you also need a CardBus compatible host
96 bridge. Virtually all modern PCMCIA bridges do this, and most of
97 them are "yenta-compatible", so say Y or M there, too.
101 comment "PC-card bridges"
104 tristate "CardBus yenta-compatible bridge support"
106 select PCCARD_NONSTATIC
108 This option enables support for CardBus host bridges. Virtually
109 all modern PCMCIA bridges are CardBus compatible. A "bridge" is
110 the hardware inside your computer that PCMCIA cards are plugged
113 To compile this driver as modules, choose M here: the
114 module will be called yenta_socket.
119 tristate "Cirrus PD6729 compatible bridge support"
120 depends on PCMCIA && PCI
121 select PCCARD_NONSTATIC
123 This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
124 device, found in some older laptops and PCMCIA card readers.
127 tristate "i82092 compatible bridge support"
128 depends on PCMCIA && PCI
129 select PCCARD_NONSTATIC
131 This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
132 found in some older laptops and more commonly in evaluation boards for the
136 tristate "i82365 compatible bridge support"
137 depends on PCMCIA && ISA
138 select PCCARD_NONSTATIC
140 Say Y here to include support for ISA-bus PCMCIA host bridges that
141 are register compatible with the Intel i82365. These are found on
142 older laptops and ISA-bus card readers for desktop systems. A
143 "bridge" is the hardware inside your computer that PCMCIA cards are
144 plugged into. If unsure, say N.
147 tristate "Databook TCIC host bridge support"
149 select PCCARD_NONSTATIC
151 Say Y here to include support for the Databook TCIC family of PCMCIA
152 host bridges. These are only found on a handful of old systems.
153 "Bridge" is the name used for the hardware inside your computer that
154 PCMCIA cards are plugged into. If unsure, say N.
156 config HD64465_PCMCIA
157 tristate "HD64465 host bridge support"
158 depends on HD64465 && PCMCIA
161 tristate "Au1x00 pcmcia support"
162 depends on SOC_AU1X00 && PCMCIA
165 tristate "SA1100 support"
166 depends on ARM && ARCH_SA1100 && PCMCIA
168 Say Y here to include support for SA11x0-based PCMCIA or CF
169 sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
170 Xscale(R) embedded machines.
172 This driver is also available as a module called sa1100_cs.
175 tristate "SA1111 support"
176 depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
178 Say Y here to include support for SA1111-based PCMCIA or CF
179 sockets, found on the Jornada 720, Graphicsmaster and other
180 StrongARM(R)/Xscale(R) embedded machines.
182 This driver is also available as a module called sa1111_cs.
185 tristate "PXA2xx support"
186 depends on ARM && ARCH_PXA && PCMCIA
188 Say Y here to include support for the PXA2xx PCMCIA controller
192 default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X
195 bool "M32R PCMCIA I/F"
196 depends on M32R && CHIP_M32700 && PCMCIA
197 select PCCARD_NONSTATIC
199 Say Y here to use the M32R PCMCIA controller.
202 bool "M32R CF I/F Controller"
203 depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
204 select PCCARD_NONSTATIC
206 Say Y here to use the M32R CompactFlash controller.
209 int "M32R CF I/F number"
211 default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
213 Set the number of M32R CF slots.
215 config PCMCIA_VRC4171
216 tristate "NEC VRC4171 Card Controllers support"
217 depends on VRC4171 && PCMCIA
219 config PCMCIA_VRC4173
220 tristate "NEC VRC4173 CARDU support"
221 depends on CPU_VR41XX && PCI && PCMCIA
223 config PCCARD_NONSTATIC