2 * IBM Hot Plug Controller Driver
4 * Written By: Jyoti Shah, IBM Corporation
6 * Copyright (C) 2001-2003 IBM Corp.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or (at
13 * your option) any later version.
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
18 * NON INFRINGEMENT. See the GNU General Public License for more
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 * Send feedback to <gregkh@us.ibm.com>
30 #include <linux/wait.h>
31 #include <linux/time.h>
32 #include <linux/delay.h>
33 #include <linux/module.h>
34 #include <linux/pci.h>
35 #include <linux/init.h>
36 #include <linux/mutex.h>
40 static int to_debug = 0;
41 #define debug_polling(fmt, arg...) do { if (to_debug) debug (fmt, arg); } while (0)
43 //----------------------------------------------------------------------------
45 //----------------------------------------------------------------------------
46 #define CMD_COMPLETE_TOUT_SEC 60 // give HPC 60 sec to finish cmd
47 #define HPC_CTLR_WORKING_TOUT 60 // give HPC 60 sec to finish cmd
48 #define HPC_GETACCESS_TIMEOUT 60 // seconds
49 #define POLL_INTERVAL_SEC 2 // poll HPC every 2 seconds
50 #define POLL_LATCH_CNT 5 // poll latch 5 times, then poll slots
52 //----------------------------------------------------------------------------
53 // Winnipeg Architected Register Offsets
54 //----------------------------------------------------------------------------
55 #define WPG_I2CMBUFL_OFFSET 0x08 // I2C Message Buffer Low
56 #define WPG_I2CMOSUP_OFFSET 0x10 // I2C Master Operation Setup Reg
57 #define WPG_I2CMCNTL_OFFSET 0x20 // I2C Master Control Register
58 #define WPG_I2CPARM_OFFSET 0x40 // I2C Parameter Register
59 #define WPG_I2CSTAT_OFFSET 0x70 // I2C Status Register
61 //----------------------------------------------------------------------------
62 // Winnipeg Store Type commands (Add this commands to the register offset)
63 //----------------------------------------------------------------------------
64 #define WPG_I2C_AND 0x1000 // I2C AND operation
65 #define WPG_I2C_OR 0x2000 // I2C OR operation
67 //----------------------------------------------------------------------------
68 // Command set for I2C Master Operation Setup Register
69 //----------------------------------------------------------------------------
70 #define WPG_READATADDR_MASK 0x00010000 // read,bytes,I2C shifted,index
71 #define WPG_WRITEATADDR_MASK 0x40010000 // write,bytes,I2C shifted,index
72 #define WPG_READDIRECT_MASK 0x10010000
73 #define WPG_WRITEDIRECT_MASK 0x60010000
76 //----------------------------------------------------------------------------
77 // bit masks for I2C Master Control Register
78 //----------------------------------------------------------------------------
79 #define WPG_I2CMCNTL_STARTOP_MASK 0x00000002 // Start the Operation
81 //----------------------------------------------------------------------------
83 //----------------------------------------------------------------------------
84 #define WPG_I2C_IOREMAP_SIZE 0x2044 // size of linear address interval
86 //----------------------------------------------------------------------------
88 //----------------------------------------------------------------------------
89 #define WPG_1ST_SLOT_INDEX 0x01 // index - 1st slot for ctlr
90 #define WPG_CTLR_INDEX 0x0F // index - ctlr
91 #define WPG_1ST_EXTSLOT_INDEX 0x10 // index - 1st ext slot for ctlr
92 #define WPG_1ST_BUS_INDEX 0x1F // index - 1st bus for ctlr
94 //----------------------------------------------------------------------------
96 //----------------------------------------------------------------------------
97 // if bits 20,22,25,26,27,29,30 are OFF return 1
98 #define HPC_I2CSTATUS_CHECK(s) ((u8)((s & 0x00000A76) ? 0 : 1))
100 //----------------------------------------------------------------------------
102 //----------------------------------------------------------------------------
103 static int ibmphp_shutdown;
105 static struct mutex sem_hpcaccess; // lock access to HPC
106 static struct semaphore semOperations; // lock all operations and
107 // access to data structures
108 static struct semaphore sem_exit; // make sure polling thread goes away
109 //----------------------------------------------------------------------------
110 // local function prototypes
111 //----------------------------------------------------------------------------
112 static u8 i2c_ctrl_read (struct controller *, void __iomem *, u8);
113 static u8 i2c_ctrl_write (struct controller *, void __iomem *, u8, u8);
114 static u8 hpc_writecmdtoindex (u8, u8);
115 static u8 hpc_readcmdtoindex (u8, u8);
116 static void get_hpc_access (void);
117 static void free_hpc_access (void);
118 static void poll_hpc (void);
119 static int process_changeinstatus (struct slot *, struct slot *);
120 static int process_changeinlatch (u8, u8, struct controller *);
121 static int hpc_poll_thread (void *);
122 static int hpc_wait_ctlr_notworking (int, struct controller *, void __iomem *, u8 *);
123 //----------------------------------------------------------------------------
126 /*----------------------------------------------------------------------
127 * Name: ibmphp_hpc_initvars
129 * Action: initialize semaphores and variables
130 *---------------------------------------------------------------------*/
131 void __init ibmphp_hpc_initvars (void)
133 debug ("%s - Entry\n", __FUNCTION__);
135 mutex_init(&sem_hpcaccess);
136 init_MUTEX (&semOperations);
137 init_MUTEX_LOCKED (&sem_exit);
142 debug ("%s - Exit\n", __FUNCTION__);
145 /*----------------------------------------------------------------------
146 * Name: i2c_ctrl_read
148 * Action: read from HPC over I2C
150 *---------------------------------------------------------------------*/
151 static u8 i2c_ctrl_read (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index)
155 void __iomem *wpg_addr; // base addr + offset
156 unsigned long wpg_data; // data to/from WPG LOHI format
157 unsigned long ultemp;
158 unsigned long data; // actual data HILO format
160 debug_polling ("%s - Entry WPGBbar[%p] index[%x] \n", __FUNCTION__, WPGBbar, index);
162 //--------------------------------------------------------------------
164 // read at address, byte length, I2C address (shifted), index
165 // or read direct, byte length, index
166 if (ctlr_ptr->ctlr_type == 0x02) {
167 data = WPG_READATADDR_MASK;
168 // fill in I2C address
169 ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
170 ultemp = ultemp >> 1;
171 data |= (ultemp << 8);
174 data |= (unsigned long)index;
175 } else if (ctlr_ptr->ctlr_type == 0x04) {
176 data = WPG_READDIRECT_MASK;
179 ultemp = (unsigned long)index;
180 ultemp = ultemp << 8;
183 err ("this controller type is not supported \n");
187 wpg_data = swab32 (data); // swap data before writing
188 wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
189 writel (wpg_data, wpg_addr);
191 //--------------------------------------------------------------------
192 // READ - step 2 : clear the message buffer
194 wpg_data = swab32 (data);
195 wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
196 writel (wpg_data, wpg_addr);
198 //--------------------------------------------------------------------
199 // READ - step 3 : issue start operation, I2C master control bit 30:ON
200 // 2020 : [20] OR operation at [20] offset 0x20
201 data = WPG_I2CMCNTL_STARTOP_MASK;
202 wpg_data = swab32 (data);
203 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
204 writel (wpg_data, wpg_addr);
206 //--------------------------------------------------------------------
207 // READ - step 4 : wait until start operation bit clears
208 i = CMD_COMPLETE_TOUT_SEC;
211 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
212 wpg_data = readl (wpg_addr);
213 data = swab32 (wpg_data);
214 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
219 debug ("%s - Error : WPG timeout\n", __FUNCTION__);
222 //--------------------------------------------------------------------
223 // READ - step 5 : read I2C status register
224 i = CMD_COMPLETE_TOUT_SEC;
227 wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
228 wpg_data = readl (wpg_addr);
229 data = swab32 (wpg_data);
230 if (HPC_I2CSTATUS_CHECK (data))
235 debug ("ctrl_read - Exit Error:I2C timeout\n");
239 //--------------------------------------------------------------------
240 // READ - step 6 : get DATA
241 wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
242 wpg_data = readl (wpg_addr);
243 data = swab32 (wpg_data);
247 debug_polling ("%s - Exit index[%x] status[%x]\n", __FUNCTION__, index, status);
252 /*----------------------------------------------------------------------
253 * Name: i2c_ctrl_write
255 * Action: write to HPC over I2C
257 * Return 0 or error codes
258 *---------------------------------------------------------------------*/
259 static u8 i2c_ctrl_write (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index, u8 cmd)
262 void __iomem *wpg_addr; // base addr + offset
263 unsigned long wpg_data; // data to/from WPG LOHI format
264 unsigned long ultemp;
265 unsigned long data; // actual data HILO format
268 debug_polling ("%s - Entry WPGBbar[%p] index[%x] cmd[%x]\n", __FUNCTION__, WPGBbar, index, cmd);
271 //--------------------------------------------------------------------
273 // write at address, byte length, I2C address (shifted), index
274 // or write direct, byte length, index
277 if (ctlr_ptr->ctlr_type == 0x02) {
278 data = WPG_WRITEATADDR_MASK;
279 // fill in I2C address
280 ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
281 ultemp = ultemp >> 1;
282 data |= (ultemp << 8);
285 data |= (unsigned long)index;
286 } else if (ctlr_ptr->ctlr_type == 0x04) {
287 data = WPG_WRITEDIRECT_MASK;
290 ultemp = (unsigned long)index;
291 ultemp = ultemp << 8;
294 err ("this controller type is not supported \n");
298 wpg_data = swab32 (data); // swap data before writing
299 wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
300 writel (wpg_data, wpg_addr);
302 //--------------------------------------------------------------------
303 // WRITE - step 2 : clear the message buffer
304 data = 0x00000000 | (unsigned long)cmd;
305 wpg_data = swab32 (data);
306 wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
307 writel (wpg_data, wpg_addr);
309 //--------------------------------------------------------------------
310 // WRITE - step 3 : issue start operation,I2C master control bit 30:ON
311 // 2020 : [20] OR operation at [20] offset 0x20
312 data = WPG_I2CMCNTL_STARTOP_MASK;
313 wpg_data = swab32 (data);
314 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
315 writel (wpg_data, wpg_addr);
317 //--------------------------------------------------------------------
318 // WRITE - step 4 : wait until start operation bit clears
319 i = CMD_COMPLETE_TOUT_SEC;
322 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
323 wpg_data = readl (wpg_addr);
324 data = swab32 (wpg_data);
325 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
330 debug ("%s - Exit Error:WPG timeout\n", __FUNCTION__);
334 //--------------------------------------------------------------------
335 // WRITE - step 5 : read I2C status register
336 i = CMD_COMPLETE_TOUT_SEC;
339 wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
340 wpg_data = readl (wpg_addr);
341 data = swab32 (wpg_data);
342 if (HPC_I2CSTATUS_CHECK (data))
347 debug ("ctrl_read - Error : I2C timeout\n");
351 debug_polling ("%s Exit rc[%x]\n", __FUNCTION__, rc);
355 //------------------------------------------------------------
356 // Read from ISA type HPC
357 //------------------------------------------------------------
358 static u8 isa_ctrl_read (struct controller *ctlr_ptr, u8 offset)
364 start_address = ctlr_ptr->u.isa_ctlr.io_start;
365 end_address = ctlr_ptr->u.isa_ctlr.io_end;
366 data = inb (start_address + offset);
370 //--------------------------------------------------------------
371 // Write to ISA type HPC
372 //--------------------------------------------------------------
373 static void isa_ctrl_write (struct controller *ctlr_ptr, u8 offset, u8 data)
378 start_address = ctlr_ptr->u.isa_ctlr.io_start;
379 port_address = start_address + (u16) offset;
380 outb (data, port_address);
383 static u8 pci_ctrl_read (struct controller *ctrl, u8 offset)
386 debug ("inside pci_ctrl_read\n");
388 pci_read_config_byte (ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, &data);
392 static u8 pci_ctrl_write (struct controller *ctrl, u8 offset, u8 data)
395 debug ("inside pci_ctrl_write\n");
396 if (ctrl->ctrl_dev) {
397 pci_write_config_byte (ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, data);
403 static u8 ctrl_read (struct controller *ctlr, void __iomem *base, u8 offset)
406 switch (ctlr->ctlr_type) {
408 rc = isa_ctrl_read (ctlr, offset);
411 rc = pci_ctrl_read (ctlr, offset);
415 rc = i2c_ctrl_read (ctlr, base, offset);
423 static u8 ctrl_write (struct controller *ctlr, void __iomem *base, u8 offset, u8 data)
426 switch (ctlr->ctlr_type) {
428 isa_ctrl_write(ctlr, offset, data);
431 rc = pci_ctrl_write (ctlr, offset, data);
435 rc = i2c_ctrl_write(ctlr, base, offset, data);
442 /*----------------------------------------------------------------------
443 * Name: hpc_writecmdtoindex()
445 * Action: convert a write command to proper index within a controller
447 * Return index, HPC_ERROR
448 *---------------------------------------------------------------------*/
449 static u8 hpc_writecmdtoindex (u8 cmd, u8 index)
454 case HPC_CTLR_ENABLEIRQ: // 0x00.N.15
455 case HPC_CTLR_CLEARIRQ: // 0x06.N.15
456 case HPC_CTLR_RESET: // 0x07.N.15
457 case HPC_CTLR_IRQSTEER: // 0x08.N.15
458 case HPC_CTLR_DISABLEIRQ: // 0x01.N.15
459 case HPC_ALLSLOT_ON: // 0x11.N.15
460 case HPC_ALLSLOT_OFF: // 0x12.N.15
464 case HPC_SLOT_OFF: // 0x02.Y.0-14
465 case HPC_SLOT_ON: // 0x03.Y.0-14
466 case HPC_SLOT_ATTNOFF: // 0x04.N.0-14
467 case HPC_SLOT_ATTNON: // 0x05.N.0-14
468 case HPC_SLOT_BLINKLED: // 0x13.N.0-14
472 case HPC_BUS_33CONVMODE:
473 case HPC_BUS_66CONVMODE:
474 case HPC_BUS_66PCIXMODE:
475 case HPC_BUS_100PCIXMODE:
476 case HPC_BUS_133PCIXMODE:
477 rc = index + WPG_1ST_BUS_INDEX - 1;
481 err ("hpc_writecmdtoindex - Error invalid cmd[%x]\n", cmd);
488 /*----------------------------------------------------------------------
489 * Name: hpc_readcmdtoindex()
491 * Action: convert a read command to proper index within a controller
493 * Return index, HPC_ERROR
494 *---------------------------------------------------------------------*/
495 static u8 hpc_readcmdtoindex (u8 cmd, u8 index)
500 case READ_CTLRSTATUS:
503 case READ_SLOTSTATUS:
507 case READ_EXTSLOTSTATUS:
508 rc = index + WPG_1ST_EXTSLOT_INDEX;
511 rc = index + WPG_1ST_BUS_INDEX - 1;
513 case READ_SLOTLATCHLOWREG:
519 case READ_HPCOPTIONS:
528 /*----------------------------------------------------------------------
529 * Name: HPCreadslot()
531 * Action: issue a READ command to HPC
533 * Input: pslot - cannot be NULL for READ_ALLSTAT
534 * pstatus - can be NULL for READ_ALLSTAT
536 * Return 0 or error codes
537 *---------------------------------------------------------------------*/
538 int ibmphp_hpc_readslot (struct slot * pslot, u8 cmd, u8 * pstatus)
540 void __iomem *wpg_bbar = NULL;
541 struct controller *ctlr_ptr;
542 struct list_head *pslotlist;
547 debug_polling ("%s - Entry pslot[%p] cmd[%x] pstatus[%p]\n", __FUNCTION__, pslot, cmd, pstatus);
550 || ((pstatus == NULL) && (cmd != READ_ALLSTAT) && (cmd != READ_BUSSTATUS))) {
552 err ("%s - Error invalid pointer, rc[%d]\n", __FUNCTION__, rc);
556 if (cmd == READ_BUSSTATUS) {
557 busindex = ibmphp_get_bus_index (pslot->bus);
560 err ("%s - Exit Error:invalid bus, rc[%d]\n", __FUNCTION__, rc);
563 index = (u8) busindex;
565 index = pslot->ctlr_index;
567 index = hpc_readcmdtoindex (cmd, index);
569 if (index == HPC_ERROR) {
571 err ("%s - Exit Error:invalid index, rc[%d]\n", __FUNCTION__, rc);
575 ctlr_ptr = pslot->ctrl;
579 //--------------------------------------------------------------------
580 // map physical address to logical address
581 //--------------------------------------------------------------------
582 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
583 wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
585 //--------------------------------------------------------------------
586 // check controller status before reading
587 //--------------------------------------------------------------------
588 rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
592 // update the slot structure
593 pslot->ctrl->status = status;
594 pslot->status = ctrl_read (ctlr_ptr, wpg_bbar, index);
595 rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
598 pslot->ext_status = ctrl_read (ctlr_ptr, wpg_bbar, index + WPG_1ST_EXTSLOT_INDEX);
602 case READ_SLOTSTATUS:
603 // DO NOT update the slot structure
604 *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
607 case READ_EXTSLOTSTATUS:
608 // DO NOT update the slot structure
609 *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
612 case READ_CTLRSTATUS:
613 // DO NOT update the slot structure
618 pslot->busstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
621 *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
623 case READ_HPCOPTIONS:
624 *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
626 case READ_SLOTLATCHLOWREG:
627 // DO NOT update the slot structure
628 *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
633 list_for_each (pslotlist, &ibmphp_slot_head) {
634 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
635 index = pslot->ctlr_index;
636 rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr,
639 pslot->status = ctrl_read (ctlr_ptr, wpg_bbar, index);
640 rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT,
641 ctlr_ptr, wpg_bbar, &status);
644 ctrl_read (ctlr_ptr, wpg_bbar,
645 index + WPG_1ST_EXTSLOT_INDEX);
647 err ("%s - Error ctrl_read failed\n", __FUNCTION__);
658 //--------------------------------------------------------------------
660 //--------------------------------------------------------------------
662 // remove physical to logical address mapping
663 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
668 debug_polling ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
672 /*----------------------------------------------------------------------
673 * Name: ibmphp_hpc_writeslot()
675 * Action: issue a WRITE command to HPC
676 *---------------------------------------------------------------------*/
677 int ibmphp_hpc_writeslot (struct slot * pslot, u8 cmd)
679 void __iomem *wpg_bbar = NULL;
680 struct controller *ctlr_ptr;
687 debug_polling ("%s - Entry pslot[%p] cmd[%x]\n", __FUNCTION__, pslot, cmd);
690 err ("%s - Error Exit rc[%d]\n", __FUNCTION__, rc);
694 if ((cmd == HPC_BUS_33CONVMODE) || (cmd == HPC_BUS_66CONVMODE) ||
695 (cmd == HPC_BUS_66PCIXMODE) || (cmd == HPC_BUS_100PCIXMODE) ||
696 (cmd == HPC_BUS_133PCIXMODE)) {
697 busindex = ibmphp_get_bus_index (pslot->bus);
700 err ("%s - Exit Error:invalid bus, rc[%d]\n", __FUNCTION__, rc);
703 index = (u8) busindex;
705 index = pslot->ctlr_index;
707 index = hpc_writecmdtoindex (cmd, index);
709 if (index == HPC_ERROR) {
711 err ("%s - Error Exit rc[%d]\n", __FUNCTION__, rc);
715 ctlr_ptr = pslot->ctrl;
719 //--------------------------------------------------------------------
720 // map physical address to logical address
721 //--------------------------------------------------------------------
722 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4)) {
723 wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
725 debug ("%s - ctlr id[%x] physical[%lx] logical[%lx] i2c[%x]\n", __FUNCTION__,
726 ctlr_ptr->ctlr_id, (ulong) (ctlr_ptr->u.wpeg_ctlr.wpegbbar), (ulong) wpg_bbar,
727 ctlr_ptr->u.wpeg_ctlr.i2c_addr);
729 //--------------------------------------------------------------------
730 // check controller status before writing
731 //--------------------------------------------------------------------
732 rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
735 ctrl_write (ctlr_ptr, wpg_bbar, index, cmd);
737 //--------------------------------------------------------------------
738 // check controller is still not working on the command
739 //--------------------------------------------------------------------
740 timeout = CMD_COMPLETE_TOUT_SEC;
743 rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
746 if (NEEDTOCHECK_CMDSTATUS (cmd)) {
747 if (CTLR_FINISHED (status) == HPC_CTLR_FINISHED_YES)
756 err ("%s - Error command complete timeout\n", __FUNCTION__);
762 ctlr_ptr->status = status;
766 // remove physical to logical address mapping
767 if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
771 debug_polling ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
775 /*----------------------------------------------------------------------
776 * Name: get_hpc_access()
778 * Action: make sure only one process can access HPC at one time
779 *---------------------------------------------------------------------*/
780 static void get_hpc_access (void)
782 mutex_lock(&sem_hpcaccess);
785 /*----------------------------------------------------------------------
786 * Name: free_hpc_access()
787 *---------------------------------------------------------------------*/
788 void free_hpc_access (void)
790 mutex_unlock(&sem_hpcaccess);
793 /*----------------------------------------------------------------------
794 * Name: ibmphp_lock_operations()
796 * Action: make sure only one process can change the data structure
797 *---------------------------------------------------------------------*/
798 void ibmphp_lock_operations (void)
800 down (&semOperations);
804 /*----------------------------------------------------------------------
805 * Name: ibmphp_unlock_operations()
806 *---------------------------------------------------------------------*/
807 void ibmphp_unlock_operations (void)
809 debug ("%s - Entry\n", __FUNCTION__);
812 debug ("%s - Exit\n", __FUNCTION__);
815 /*----------------------------------------------------------------------
817 *---------------------------------------------------------------------*/
818 #define POLL_LATCH_REGISTER 0
821 static void poll_hpc (void)
824 struct slot *pslot = NULL;
825 struct list_head *pslotlist;
827 int poll_state = POLL_LATCH_REGISTER;
828 u8 oldlatchlow = 0x00;
829 u8 curlatchlow = 0x00;
831 u8 ctrl_count = 0x00;
833 debug ("%s - Entry\n", __FUNCTION__);
835 while (!ibmphp_shutdown) {
839 /* try to get the lock to do some kind of hardware access */
840 down (&semOperations);
842 switch (poll_state) {
843 case POLL_LATCH_REGISTER:
844 oldlatchlow = curlatchlow;
846 list_for_each (pslotlist, &ibmphp_slot_head) {
847 if (ctrl_count >= ibmphp_get_total_controllers())
849 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
850 if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
852 if (READ_SLOT_LATCH (pslot->ctrl)) {
853 rc = ibmphp_hpc_readslot (pslot,
854 READ_SLOTLATCHLOWREG,
856 if (oldlatchlow != curlatchlow)
857 process_changeinlatch (oldlatchlow,
864 poll_state = POLL_SLEEP;
867 list_for_each (pslotlist, &ibmphp_slot_head) {
868 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
869 // make a copy of the old status
870 memcpy ((void *) &myslot, (void *) pslot,
871 sizeof (struct slot));
872 rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
873 if ((myslot.status != pslot->status)
874 || (myslot.ext_status != pslot->ext_status))
875 process_changeinstatus (pslot, &myslot);
878 list_for_each (pslotlist, &ibmphp_slot_head) {
879 if (ctrl_count >= ibmphp_get_total_controllers())
881 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
882 if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
884 if (READ_SLOT_LATCH (pslot->ctrl))
885 rc = ibmphp_hpc_readslot (pslot,
886 READ_SLOTLATCHLOWREG,
891 poll_state = POLL_SLEEP;
894 /* don't sleep with a lock on the hardware */
896 msleep(POLL_INTERVAL_SEC * 1000);
901 down (&semOperations);
903 if (poll_count >= POLL_LATCH_CNT) {
905 poll_state = POLL_SLOTS;
907 poll_state = POLL_LATCH_REGISTER;
910 /* give up the hardware semaphore */
912 /* sleep for a short time just for good measure */
916 debug ("%s - Exit\n", __FUNCTION__);
920 /*----------------------------------------------------------------------
921 * Name: process_changeinstatus
923 * Action: compare old and new slot status, process the change in status
925 * Input: pointer to slot struct, old slot struct
927 * Return 0 or error codes
934 *---------------------------------------------------------------------*/
935 static int process_changeinstatus (struct slot *pslot, struct slot *poldslot)
942 debug ("process_changeinstatus - Entry pslot[%p], poldslot[%p]\n", pslot, poldslot);
944 // bit 0 - HPC_SLOT_POWER
945 if ((pslot->status & 0x01) != (poldslot->status & 0x01))
948 // bit 1 - HPC_SLOT_CONNECT
951 // bit 2 - HPC_SLOT_ATTN
952 if ((pslot->status & 0x04) != (poldslot->status & 0x04))
955 // bit 3 - HPC_SLOT_PRSNT2
956 // bit 4 - HPC_SLOT_PRSNT1
957 if (((pslot->status & 0x08) != (poldslot->status & 0x08))
958 || ((pslot->status & 0x10) != (poldslot->status & 0x10)))
961 // bit 5 - HPC_SLOT_PWRGD
962 if ((pslot->status & 0x20) != (poldslot->status & 0x20))
963 // OFF -> ON: ignore, ON -> OFF: disable slot
964 if ((poldslot->status & 0x20) && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status)))
967 // bit 6 - HPC_SLOT_BUS_SPEED
970 // bit 7 - HPC_SLOT_LATCH
971 if ((pslot->status & 0x80) != (poldslot->status & 0x80)) {
974 if (pslot->status & 0x80) {
975 if (SLOT_PWRGD (pslot->status)) {
976 // power goes on and off after closing latch
977 // check again to make sure power is still ON
979 rc = ibmphp_hpc_readslot (pslot, READ_SLOTSTATUS, &status);
980 if (SLOT_PWRGD (status))
982 else // overwrite power in pslot to OFF
983 pslot->status &= ~HPC_SLOT_POWER;
987 else if ((SLOT_PWRGD (poldslot->status) == HPC_SLOT_PWRGD_GOOD)
988 && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status))) {
993 // bit 4 - HPC_SLOT_BLINK_ATTN
994 if ((pslot->ext_status & 0x08) != (poldslot->ext_status & 0x08))
998 debug ("process_changeinstatus - disable slot\n");
1000 rc = ibmphp_do_disable_slot (pslot);
1003 if (update || disable) {
1004 ibmphp_update_slot_info (pslot);
1007 debug ("%s - Exit rc[%d] disable[%x] update[%x]\n", __FUNCTION__, rc, disable, update);
1012 /*----------------------------------------------------------------------
1013 * Name: process_changeinlatch
1015 * Action: compare old and new latch reg status, process the change
1017 * Input: old and current latch register status
1019 * Return 0 or error codes
1021 *---------------------------------------------------------------------*/
1022 static int process_changeinlatch (u8 old, u8 new, struct controller *ctrl)
1024 struct slot myslot, *pslot;
1029 debug ("%s - Entry old[%x], new[%x]\n", __FUNCTION__, old, new);
1030 // bit 0 reserved, 0 is LSB, check bit 1-6 for 6 slots
1032 for (i = ctrl->starting_slot_num; i <= ctrl->ending_slot_num; i++) {
1034 if ((mask & old) != (mask & new)) {
1035 pslot = ibmphp_get_slot_from_physical_num (i);
1037 memcpy ((void *) &myslot, (void *) pslot, sizeof (struct slot));
1038 rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
1039 debug ("%s - call process_changeinstatus for slot[%d]\n", __FUNCTION__, i);
1040 process_changeinstatus (pslot, &myslot);
1043 err ("%s - Error bad pointer for slot[%d]\n", __FUNCTION__, i);
1047 debug ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
1051 /*----------------------------------------------------------------------
1052 * Name: hpc_poll_thread
1058 *---------------------------------------------------------------------*/
1059 static int hpc_poll_thread (void *data)
1061 debug ("%s - Entry\n", __FUNCTION__);
1063 daemonize("hpc_poll");
1064 allow_signal(SIGKILL);
1069 debug ("%s - Exit\n", __FUNCTION__);
1074 /*----------------------------------------------------------------------
1075 * Name: ibmphp_hpc_start_poll_thread
1077 * Action: start polling thread
1078 *---------------------------------------------------------------------*/
1079 int __init ibmphp_hpc_start_poll_thread (void)
1083 debug ("%s - Entry\n", __FUNCTION__);
1085 tid_poll = kernel_thread (hpc_poll_thread, NULL, 0);
1087 err ("%s - Error, thread not started\n", __FUNCTION__);
1091 debug ("%s - Exit tid_poll[%d] rc[%d]\n", __FUNCTION__, tid_poll, rc);
1095 /*----------------------------------------------------------------------
1096 * Name: ibmphp_hpc_stop_poll_thread
1098 * Action: stop polling thread and cleanup
1099 *---------------------------------------------------------------------*/
1100 void __exit ibmphp_hpc_stop_poll_thread (void)
1102 debug ("%s - Entry\n", __FUNCTION__);
1104 ibmphp_shutdown = 1;
1105 debug ("before locking operations \n");
1106 ibmphp_lock_operations ();
1107 debug ("after locking operations \n");
1109 // wait for poll thread to exit
1110 debug ("before sem_exit down \n");
1112 debug ("after sem_exit down \n");
1115 debug ("before free_hpc_access \n");
1117 debug ("after free_hpc_access \n");
1118 ibmphp_unlock_operations ();
1119 debug ("after unlock operations \n");
1121 debug ("after sem exit up\n");
1123 debug ("%s - Exit\n", __FUNCTION__);
1126 /*----------------------------------------------------------------------
1127 * Name: hpc_wait_ctlr_notworking
1129 * Action: wait until the controller is in a not working state
1131 * Return 0, HPC_ERROR
1133 *---------------------------------------------------------------------*/
1134 static int hpc_wait_ctlr_notworking (int timeout, struct controller *ctlr_ptr, void __iomem *wpg_bbar,
1140 debug_polling ("hpc_wait_ctlr_notworking - Entry timeout[%d]\n", timeout);
1143 *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, WPG_CTLR_INDEX);
1144 if (*pstatus == HPC_ERROR) {
1148 if (CTLR_WORKING (*pstatus) == HPC_CTLR_WORKING_NO)
1154 err ("HPCreadslot - Error ctlr timeout\n");
1160 debug_polling ("hpc_wait_ctlr_notworking - Exit rc[%x] status[%x]\n", rc, *pstatus);