err.no Git - linux-2.6/blob - drivers/net/wireless/rt2x00/rt61pci.c

   1 /*
   2         Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt61pci
  23         Abstract: rt61pci device specific routines.
  24         Supported chipsets: RT2561, RT2561s, RT2661.
  25  */
  26
  27 #include <linux/delay.h>
  28 #include <linux/etherdevice.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/pci.h>
  33 #include <linux/eeprom_93cx6.h>
  34
  35 #include "rt2x00.h"
  36 #include "rt2x00pci.h"
  37 #include "rt61pci.h"
  38
  39 /*
  40  * Register access.
  41  * BBP and RF register require indirect register access,
  42  * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this.
  43  * These indirect registers work with busy bits,
  44  * and we will try maximal REGISTER_BUSY_COUNT times to access
  45  * the register while taking a REGISTER_BUSY_DELAY us delay
  46  * between each attampt. When the busy bit is still set at that time,
  47  * the access attempt is considered to have failed,
  48  * and we will print an error.
  49  */
  50 static u32 rt61pci_bbp_check(struct rt2x00_dev *rt2x00dev)
  51 {
  52         u32 reg;
  53         unsigned int i;
  54
  55         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
  56                 rt2x00pci_register_read(rt2x00dev, PHY_CSR3, &reg);
  57                 if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY))
  58                         break;
  59                 udelay(REGISTER_BUSY_DELAY);
  60         }
  61
  62         return reg;
  63 }
  64
  65 static void rt61pci_bbp_write(struct rt2x00_dev *rt2x00dev,
  66                               const unsigned int word, const u8 value)
  67 {
  68         u32 reg;
  69
  70         /*
  71          * Wait until the BBP becomes ready.
  72          */
  73         reg = rt61pci_bbp_check(rt2x00dev);
  74         if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
  75                 ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
  76                 return;
  77         }
  78
  79         /*
  80          * Write the data into the BBP.
  81          */
  82         reg = 0;
  83         rt2x00_set_field32(&reg, PHY_CSR3_VALUE, value);
  84         rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
  85         rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
  86         rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 0);
  87
  88         rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg);
  89 }
  90
  91 static void rt61pci_bbp_read(struct rt2x00_dev *rt2x00dev,
  92                              const unsigned int word, u8 *value)
  93 {
  94         u32 reg;
  95
  96         /*
  97          * Wait until the BBP becomes ready.
  98          */
  99         reg = rt61pci_bbp_check(rt2x00dev);
 100         if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
 101                 ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
 102                 return;
 103         }
 104
 105         /*
 106          * Write the request into the BBP.
 107          */
 108         reg = 0;
 109         rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
 110         rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
 111         rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 1);
 112
 113         rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg);
 114
 115         /*
 116          * Wait until the BBP becomes ready.
 117          */
 118         reg = rt61pci_bbp_check(rt2x00dev);
 119         if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
 120                 ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
 121                 *value = 0xff;
 122                 return;
 123         }
 124
 125         *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
 126 }
 127
 128 static void rt61pci_rf_write(struct rt2x00_dev *rt2x00dev,
 129                              const unsigned int word, const u32 value)
 130 {
 131         u32 reg;
 132         unsigned int i;
 133
 134         if (!word)
 135                 return;
 136
 137         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 138                 rt2x00pci_register_read(rt2x00dev, PHY_CSR4, &reg);
 139                 if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY))
 140                         goto rf_write;
 141                 udelay(REGISTER_BUSY_DELAY);
 142         }
 143
 144         ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n");
 145         return;
 146
 147 rf_write:
 148         reg = 0;
 149         rt2x00_set_field32(&reg, PHY_CSR4_VALUE, value);
 150         rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS, 21);
 151         rt2x00_set_field32(&reg, PHY_CSR4_IF_SELECT, 0);
 152         rt2x00_set_field32(&reg, PHY_CSR4_BUSY, 1);
 153
 154         rt2x00pci_register_write(rt2x00dev, PHY_CSR4, reg);
 155         rt2x00_rf_write(rt2x00dev, word, value);
 156 }
 157
 158 #ifdef CONFIG_RT61PCI_LEDS
 159 /*
 160  * This function is only called from rt61pci_led_brightness()
 161  * make gcc happy by placing this function inside the
 162  * same ifdef statement as the caller.
 163  */
 164 static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev,
 165                                 const u8 command, const u8 token,
 166                                 const u8 arg0, const u8 arg1)
 167 {
 168         u32 reg;
 169
 170         rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CSR, &reg);
 171
 172         if (rt2x00_get_field32(reg, H2M_MAILBOX_CSR_OWNER)) {
 173                 ERROR(rt2x00dev, "mcu request error. "
 174                       "Request 0x%02x failed for token 0x%02x.\n",
 175                       command, token);
 176                 return;
 177         }
 178
 179         rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
 180         rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
 181         rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
 182         rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
 183         rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg);
 184
 185         rt2x00pci_register_read(rt2x00dev, HOST_CMD_CSR, &reg);
 186         rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
 187         rt2x00_set_field32(&reg, HOST_CMD_CSR_INTERRUPT_MCU, 1);
 188         rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
 189 }
 190 #endif /* CONFIG_RT61PCI_LEDS */
 191
 192 static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
 193 {
 194         struct rt2x00_dev *rt2x00dev = eeprom->data;
 195         u32 reg;
 196
 197         rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
 198
 199         eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN);
 200         eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT);
 201         eeprom->reg_data_clock =
 202             !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK);
 203         eeprom->reg_chip_select =
 204             !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT);
 205 }
 206
 207 static void rt61pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
 208 {
 209         struct rt2x00_dev *rt2x00dev = eeprom->data;
 210         u32 reg = 0;
 211
 212         rt2x00_set_field32(&reg, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in);
 213         rt2x00_set_field32(&reg, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out);
 214         rt2x00_set_field32(&reg, E2PROM_CSR_DATA_CLOCK,
 215                            !!eeprom->reg_data_clock);
 216         rt2x00_set_field32(&reg, E2PROM_CSR_CHIP_SELECT,
 217                            !!eeprom->reg_chip_select);
 218
 219         rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg);
 220 }
 221
 222 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 223 #define CSR_OFFSET(__word)      ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
 224
 225 static void rt61pci_read_csr(struct rt2x00_dev *rt2x00dev,
 226                              const unsigned int word, u32 *data)
 227 {
 228         rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data);
 229 }
 230
 231 static void rt61pci_write_csr(struct rt2x00_dev *rt2x00dev,
 232                               const unsigned int word, u32 data)
 233 {
 234         rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data);
 235 }
 236
 237 static const struct rt2x00debug rt61pci_rt2x00debug = {
 238         .owner  = THIS_MODULE,
 239         .csr    = {
 240                 .read           = rt61pci_read_csr,
 241                 .write          = rt61pci_write_csr,
 242                 .word_size      = sizeof(u32),
 243                 .word_count     = CSR_REG_SIZE / sizeof(u32),
 244         },
 245         .eeprom = {
 246                 .read           = rt2x00_eeprom_read,
 247                 .write          = rt2x00_eeprom_write,
 248                 .word_size      = sizeof(u16),
 249                 .word_count     = EEPROM_SIZE / sizeof(u16),
 250         },
 251         .bbp    = {
 252                 .read           = rt61pci_bbp_read,
 253                 .write          = rt61pci_bbp_write,
 254                 .word_size      = sizeof(u8),
 255                 .word_count     = BBP_SIZE / sizeof(u8),
 256         },
 257         .rf     = {
 258                 .read           = rt2x00_rf_read,
 259                 .write          = rt61pci_rf_write,
 260                 .word_size      = sizeof(u32),
 261                 .word_count     = RF_SIZE / sizeof(u32),
 262         },
 263 };
 264 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 265
 266 #ifdef CONFIG_RT61PCI_RFKILL
 267 static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 268 {
 269         u32 reg;
 270
 271         rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
 272         return rt2x00_get_field32(reg, MAC_CSR13_BIT5);
 273 }
 274 #else
 275 #define rt61pci_rfkill_poll     NULL
 276 #endif /* CONFIG_RT61PCI_RFKILL */
 277
 278 #ifdef CONFIG_RT61PCI_LEDS
 279 static void rt61pci_led_brightness(struct led_classdev *led_cdev,
 280                                    enum led_brightness brightness)
 281 {
 282         struct rt2x00_led *led =
 283             container_of(led_cdev, struct rt2x00_led, led_dev);
 284         unsigned int enabled = brightness != LED_OFF;
 285         unsigned int a_mode =
 286             (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
 287         unsigned int bg_mode =
 288             (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
 289
 290         if (led->type == LED_TYPE_RADIO) {
 291                 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
 292                                    MCU_LEDCS_RADIO_STATUS, enabled);
 293
 294                 rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
 295                                     (led->rt2x00dev->led_mcu_reg & 0xff),
 296                                     ((led->rt2x00dev->led_mcu_reg >> 8)));
 297         } else if (led->type == LED_TYPE_ASSOC) {
 298                 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
 299                                    MCU_LEDCS_LINK_BG_STATUS, bg_mode);
 300                 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
 301                                    MCU_LEDCS_LINK_A_STATUS, a_mode);
 302
 303                 rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
 304                                     (led->rt2x00dev->led_mcu_reg & 0xff),
 305                                     ((led->rt2x00dev->led_mcu_reg >> 8)));
 306         } else if (led->type == LED_TYPE_QUALITY) {
 307                 /*
 308                  * The brightness is divided into 6 levels (0 - 5),
 309                  * this means we need to convert the brightness
 310                  * argument into the matching level within that range.
 311                  */
 312                 rt61pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
 313                                     brightness / (LED_FULL / 6), 0);
 314         }
 315 }
 316 #else
 317 #define rt61pci_led_brightness  NULL
 318 #endif /* CONFIG_RT61PCI_LEDS */
 319
 320 /*
 321  * Configuration handlers.
 322  */
 323 static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev,
 324                                 struct rt2x00_intf *intf,
 325                                 struct rt2x00intf_conf *conf,
 326                                 const unsigned int flags)
 327 {
 328         unsigned int beacon_base;
 329         u32 reg;
 330
 331         if (flags & CONFIG_UPDATE_TYPE) {
 332                 /*
 333                  * Clear current synchronisation setup.
 334                  * For the Beacon base registers we only need to clear
 335                  * the first byte since that byte contains the VALID and OWNER
 336                  * bits which (when set to 0) will invalidate the entire beacon.
 337                  */
 338                 beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
 339                 rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0);
 340                 rt2x00pci_register_write(rt2x00dev, beacon_base, 0);
 341
 342                 /*
 343                  * Enable synchronisation.
 344                  */
 345                 rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
 346                 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
 347                 rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE,
 348                                   (conf->sync == TSF_SYNC_BEACON));
 349                 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
 350                 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, conf->sync);
 351                 rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
 352         }
 353
 354         if (flags & CONFIG_UPDATE_MAC) {
 355                 reg = le32_to_cpu(conf->mac[1]);
 356                 rt2x00_set_field32(&reg, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
 357                 conf->mac[1] = cpu_to_le32(reg);
 358
 359                 rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2,
 360                                               conf->mac, sizeof(conf->mac));
 361         }
 362
 363         if (flags & CONFIG_UPDATE_BSSID) {
 364                 reg = le32_to_cpu(conf->bssid[1]);
 365                 rt2x00_set_field32(&reg, MAC_CSR5_BSS_ID_MASK, 3);
 366                 conf->bssid[1] = cpu_to_le32(reg);
 367
 368                 rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4,
 369                                               conf->bssid, sizeof(conf->bssid));
 370         }
 371 }
 372
 373 static int rt61pci_config_preamble(struct rt2x00_dev *rt2x00dev,
 374                                    const int short_preamble,
 375                                    const int ack_timeout,
 376                                    const int ack_consume_time)
 377 {
 378         u32 reg;
 379
 380         rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
 381         rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, ack_timeout);
 382         rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
 383
 384         rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
 385         rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE,
 386                            !!short_preamble);
 387         rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
 388
 389         return 0;
 390 }
 391
 392 static void rt61pci_config_phymode(struct rt2x00_dev *rt2x00dev,
 393                                    const int basic_rate_mask)
 394 {
 395         rt2x00pci_register_write(rt2x00dev, TXRX_CSR5, basic_rate_mask);
 396 }
 397
 398 static void rt61pci_config_channel(struct rt2x00_dev *rt2x00dev,
 399                                    struct rf_channel *rf, const int txpower)
 400 {
 401         u8 r3;
 402         u8 r94;
 403         u8 smart;
 404
 405         rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 406         rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
 407
 408         smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
 409                   rt2x00_rf(&rt2x00dev->chip, RF2527));
 410
 411         rt61pci_bbp_read(rt2x00dev, 3, &r3);
 412         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
 413         rt61pci_bbp_write(rt2x00dev, 3, r3);
 414
 415         r94 = 6;
 416         if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94))
 417                 r94 += txpower - MAX_TXPOWER;
 418         else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94))
 419                 r94 += txpower;
 420         rt61pci_bbp_write(rt2x00dev, 94, r94);
 421
 422         rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
 423         rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
 424         rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
 425         rt61pci_rf_write(rt2x00dev, 4, rf->rf4);
 426
 427         udelay(200);
 428
 429         rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
 430         rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
 431         rt61pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
 432         rt61pci_rf_write(rt2x00dev, 4, rf->rf4);
 433
 434         udelay(200);
 435
 436         rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
 437         rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
 438         rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
 439         rt61pci_rf_write(rt2x00dev, 4, rf->rf4);
 440
 441         msleep(1);
 442 }
 443
 444 static void rt61pci_config_txpower(struct rt2x00_dev *rt2x00dev,
 445                                    const int txpower)
 446 {
 447         struct rf_channel rf;
 448
 449         rt2x00_rf_read(rt2x00dev, 1, &rf.rf1);
 450         rt2x00_rf_read(rt2x00dev, 2, &rf.rf2);
 451         rt2x00_rf_read(rt2x00dev, 3, &rf.rf3);
 452         rt2x00_rf_read(rt2x00dev, 4, &rf.rf4);
 453
 454         rt61pci_config_channel(rt2x00dev, &rf, txpower);
 455 }
 456
 457 static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
 458                                       struct antenna_setup *ant)
 459 {
 460         u8 r3;
 461         u8 r4;
 462         u8 r77;
 463
 464         rt61pci_bbp_read(rt2x00dev, 3, &r3);
 465         rt61pci_bbp_read(rt2x00dev, 4, &r4);
 466         rt61pci_bbp_read(rt2x00dev, 77, &r77);
 467
 468         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE,
 469                           rt2x00_rf(&rt2x00dev->chip, RF5325));
 470
 471         /*
 472          * Configure the RX antenna.
 473          */
 474         switch (ant->rx) {
 475         case ANTENNA_HW_DIVERSITY:
 476                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
 477                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
 478                                   (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ));
 479                 break;
 480         case ANTENNA_A:
 481                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 482                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
 483                 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
 484                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 485                 else
 486                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 487                 break;
 488         case ANTENNA_SW_DIVERSITY:
 489                 /*
 490                  * NOTE: We should never come here because rt2x00lib is
 491                  * supposed to catch this and send us the correct antenna
 492                  * explicitely. However we are nog going to bug about this.
 493                  * Instead, just default to antenna B.
 494                  */
 495         case ANTENNA_B:
 496                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 497                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
 498                 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
 499                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 500                 else
 501                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 502                 break;
 503         }
 504
 505         rt61pci_bbp_write(rt2x00dev, 77, r77);
 506         rt61pci_bbp_write(rt2x00dev, 3, r3);
 507         rt61pci_bbp_write(rt2x00dev, 4, r4);
 508 }
 509
 510 static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
 511                                       struct antenna_setup *ant)
 512 {
 513         u8 r3;
 514         u8 r4;
 515         u8 r77;
 516
 517         rt61pci_bbp_read(rt2x00dev, 3, &r3);
 518         rt61pci_bbp_read(rt2x00dev, 4, &r4);
 519         rt61pci_bbp_read(rt2x00dev, 77, &r77);
 520
 521         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE,
 522                           rt2x00_rf(&rt2x00dev->chip, RF2529));
 523         rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
 524                           !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
 525
 526         /*
 527          * Configure the RX antenna.
 528          */
 529         switch (ant->rx) {
 530         case ANTENNA_HW_DIVERSITY:
 531                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
 532                 break;
 533         case ANTENNA_A:
 534                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 535                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 536                 break;
 537         case ANTENNA_SW_DIVERSITY:
 538                 /*
 539                  * NOTE: We should never come here because rt2x00lib is
 540                  * supposed to catch this and send us the correct antenna
 541                  * explicitely. However we are nog going to bug about this.
 542                  * Instead, just default to antenna B.
 543                  */
 544         case ANTENNA_B:
 545                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 546                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 547                 break;
 548         }
 549
 550         rt61pci_bbp_write(rt2x00dev, 77, r77);
 551         rt61pci_bbp_write(rt2x00dev, 3, r3);
 552         rt61pci_bbp_write(rt2x00dev, 4, r4);
 553 }
 554
 555 static void rt61pci_config_antenna_2529_rx(struct rt2x00_dev *rt2x00dev,
 556                                            const int p1, const int p2)
 557 {
 558         u32 reg;
 559
 560         rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
 561
 562         rt2x00_set_field32(&reg, MAC_CSR13_BIT4, p1);
 563         rt2x00_set_field32(&reg, MAC_CSR13_BIT12, 0);
 564
 565         rt2x00_set_field32(&reg, MAC_CSR13_BIT3, !p2);
 566         rt2x00_set_field32(&reg, MAC_CSR13_BIT11, 0);
 567
 568         rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
 569 }
 570
 571 static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev,
 572                                         struct antenna_setup *ant)
 573 {
 574         u8 r3;
 575         u8 r4;
 576         u8 r77;
 577
 578         rt61pci_bbp_read(rt2x00dev, 3, &r3);
 579         rt61pci_bbp_read(rt2x00dev, 4, &r4);
 580         rt61pci_bbp_read(rt2x00dev, 77, &r77);
 581
 582         /* FIXME: Antenna selection for the rf 2529 is very confusing in the
 583          * legacy driver. The code below should be ok for non-diversity setups.
 584          */
 585
 586         /*
 587          * Configure the RX antenna.
 588          */
 589         switch (ant->rx) {
 590         case ANTENNA_A:
 591                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 592                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 593                 rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0);
 594                 break;
 595         case ANTENNA_SW_DIVERSITY:
 596         case ANTENNA_HW_DIVERSITY:
 597                 /*
 598                  * NOTE: We should never come here because rt2x00lib is
 599                  * supposed to catch this and send us the correct antenna
 600                  * explicitely. However we are nog going to bug about this.
 601                  * Instead, just default to antenna B.
 602                  */
 603         case ANTENNA_B:
 604                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 605                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 606                 rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1);
 607                 break;
 608         }
 609
 610         rt61pci_bbp_write(rt2x00dev, 77, r77);
 611         rt61pci_bbp_write(rt2x00dev, 3, r3);
 612         rt61pci_bbp_write(rt2x00dev, 4, r4);
 613 }
 614
 615 struct antenna_sel {
 616         u8 word;
 617         /*
 618          * value[0] -> non-LNA
 619          * value[1] -> LNA
 620          */
 621         u8 value[2];
 622 };
 623
 624 static const struct antenna_sel antenna_sel_a[] = {
 625         { 96,  { 0x58, 0x78 } },
 626         { 104, { 0x38, 0x48 } },
 627         { 75,  { 0xfe, 0x80 } },
 628         { 86,  { 0xfe, 0x80 } },
 629         { 88,  { 0xfe, 0x80 } },
 630         { 35,  { 0x60, 0x60 } },
 631         { 97,  { 0x58, 0x58 } },
 632         { 98,  { 0x58, 0x58 } },
 633 };
 634
 635 static const struct antenna_sel antenna_sel_bg[] = {
 636         { 96,  { 0x48, 0x68 } },
 637         { 104, { 0x2c, 0x3c } },
 638         { 75,  { 0xfe, 0x80 } },
 639         { 86,  { 0xfe, 0x80 } },
 640         { 88,  { 0xfe, 0x80 } },
 641         { 35,  { 0x50, 0x50 } },
 642         { 97,  { 0x48, 0x48 } },
 643         { 98,  { 0x48, 0x48 } },
 644 };
 645
 646 static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
 647                                    struct antenna_setup *ant)
 648 {
 649         const struct antenna_sel *sel;
 650         unsigned int lna;
 651         unsigned int i;
 652         u32 reg;
 653
 654         if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
 655                 sel = antenna_sel_a;
 656                 lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
 657         } else {
 658                 sel = antenna_sel_bg;
 659                 lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
 660         }
 661
 662         for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
 663                 rt61pci_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
 664
 665         rt2x00pci_register_read(rt2x00dev, PHY_CSR0, &reg);
 666
 667         rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG,
 668                            rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
 669         rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A,
 670                            rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
 671
 672         rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg);
 673
 674         if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
 675             rt2x00_rf(&rt2x00dev->chip, RF5325))
 676                 rt61pci_config_antenna_5x(rt2x00dev, ant);
 677         else if (rt2x00_rf(&rt2x00dev->chip, RF2527))
 678                 rt61pci_config_antenna_2x(rt2x00dev, ant);
 679         else if (rt2x00_rf(&rt2x00dev->chip, RF2529)) {
 680                 if (test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags))
 681                         rt61pci_config_antenna_2x(rt2x00dev, ant);
 682                 else
 683                         rt61pci_config_antenna_2529(rt2x00dev, ant);
 684         }
 685 }
 686
 687 static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev,
 688                                     struct rt2x00lib_conf *libconf)
 689 {
 690         u32 reg;
 691
 692         rt2x00pci_register_read(rt2x00dev, MAC_CSR9, &reg);
 693         rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME, libconf->slot_time);
 694         rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg);
 695
 696         rt2x00pci_register_read(rt2x00dev, MAC_CSR8, &reg);
 697         rt2x00_set_field32(&reg, MAC_CSR8_SIFS, libconf->sifs);
 698         rt2x00_set_field32(&reg, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3);
 699         rt2x00_set_field32(&reg, MAC_CSR8_EIFS, libconf->eifs);
 700         rt2x00pci_register_write(rt2x00dev, MAC_CSR8, reg);
 701
 702         rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
 703         rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
 704         rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
 705
 706         rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
 707         rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
 708         rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
 709
 710         rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
 711         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
 712                            libconf->conf->beacon_int * 16);
 713         rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
 714 }
 715
 716 static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
 717                            struct rt2x00lib_conf *libconf,
 718                            const unsigned int flags)
 719 {
 720         if (flags & CONFIG_UPDATE_PHYMODE)
 721                 rt61pci_config_phymode(rt2x00dev, libconf->basic_rates);
 722         if (flags & CONFIG_UPDATE_CHANNEL)
 723                 rt61pci_config_channel(rt2x00dev, &libconf->rf,
 724                                        libconf->conf->power_level);
 725         if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
 726                 rt61pci_config_txpower(rt2x00dev, libconf->conf->power_level);
 727         if (flags & CONFIG_UPDATE_ANTENNA)
 728                 rt61pci_config_antenna(rt2x00dev, &libconf->ant);
 729         if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
 730                 rt61pci_config_duration(rt2x00dev, libconf);
 731 }
 732
 733 /*
 734  * Link tuning
 735  */
 736 static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev,
 737                                struct link_qual *qual)
 738 {
 739         u32 reg;
 740
 741         /*
 742          * Update FCS error count from register.
 743          */
 744         rt2x00pci_register_read(rt2x00dev, STA_CSR0, &reg);
 745         qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR);
 746
 747         /*
 748          * Update False CCA count from register.
 749          */
 750         rt2x00pci_register_read(rt2x00dev, STA_CSR1, &reg);
 751         qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
 752 }
 753
 754 static void rt61pci_reset_tuner(struct rt2x00_dev *rt2x00dev)
 755 {
 756         rt61pci_bbp_write(rt2x00dev, 17, 0x20);
 757         rt2x00dev->link.vgc_level = 0x20;
 758 }
 759
 760 static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev)
 761 {
 762         int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
 763         u8 r17;
 764         u8 up_bound;
 765         u8 low_bound;
 766
 767         rt61pci_bbp_read(rt2x00dev, 17, &r17);
 768
 769         /*
 770          * Determine r17 bounds.
 771          */
 772         if (rt2x00dev->rx_status.band == IEEE80211_BAND_2GHZ) {
 773                 low_bound = 0x28;
 774                 up_bound = 0x48;
 775                 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
 776                         low_bound += 0x10;
 777                         up_bound += 0x10;
 778                 }
 779         } else {
 780                 low_bound = 0x20;
 781                 up_bound = 0x40;
 782                 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
 783                         low_bound += 0x10;
 784                         up_bound += 0x10;
 785                 }
 786         }
 787
 788         /*
 789          * If we are not associated, we should go straight to the
 790          * dynamic CCA tuning.
 791          */
 792         if (!rt2x00dev->intf_associated)
 793                 goto dynamic_cca_tune;
 794
 795         /*
 796          * Special big-R17 for very short distance
 797          */
 798         if (rssi >= -35) {
 799                 if (r17 != 0x60)
 800                         rt61pci_bbp_write(rt2x00dev, 17, 0x60);
 801                 return;
 802         }
 803
 804         /*
 805          * Special big-R17 for short distance
 806          */
 807         if (rssi >= -58) {
 808                 if (r17 != up_bound)
 809                         rt61pci_bbp_write(rt2x00dev, 17, up_bound);
 810                 return;
 811         }
 812
 813         /*
 814          * Special big-R17 for middle-short distance
 815          */
 816         if (rssi >= -66) {
 817                 low_bound += 0x10;
 818                 if (r17 != low_bound)
 819                         rt61pci_bbp_write(rt2x00dev, 17, low_bound);
 820                 return;
 821         }
 822
 823         /*
 824          * Special mid-R17 for middle distance
 825          */
 826         if (rssi >= -74) {
 827                 low_bound += 0x08;
 828                 if (r17 != low_bound)
 829                         rt61pci_bbp_write(rt2x00dev, 17, low_bound);
 830                 return;
 831         }
 832
 833         /*
 834          * Special case: Change up_bound based on the rssi.
 835          * Lower up_bound when rssi is weaker then -74 dBm.
 836          */
 837         up_bound -= 2 * (-74 - rssi);
 838         if (low_bound > up_bound)
 839                 up_bound = low_bound;
 840
 841         if (r17 > up_bound) {
 842                 rt61pci_bbp_write(rt2x00dev, 17, up_bound);
 843                 return;
 844         }
 845
 846 dynamic_cca_tune:
 847
 848         /*
 849          * r17 does not yet exceed upper limit, continue and base
 850          * the r17 tuning on the false CCA count.
 851          */
 852         if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) {
 853                 if (++r17 > up_bound)
 854                         r17 = up_bound;
 855                 rt61pci_bbp_write(rt2x00dev, 17, r17);
 856         } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) {
 857                 if (--r17 < low_bound)
 858                         r17 = low_bound;
 859                 rt61pci_bbp_write(rt2x00dev, 17, r17);
 860         }
 861 }
 862
 863 /*
 864  * Firmware name function.
 865  */
 866 static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
 867 {
 868         char *fw_name;
 869
 870         switch (rt2x00dev->chip.rt) {
 871         case RT2561:
 872                 fw_name = FIRMWARE_RT2561;
 873                 break;
 874         case RT2561s:
 875                 fw_name = FIRMWARE_RT2561s;
 876                 break;
 877         case RT2661:
 878                 fw_name = FIRMWARE_RT2661;
 879                 break;
 880         default:
 881                 fw_name = NULL;
 882                 break;
 883         }
 884
 885         return fw_name;
 886 }
 887
 888 /*
 889  * Initialization functions.
 890  */
 891 static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data,
 892                                  const size_t len)
 893 {
 894         int i;
 895         u32 reg;
 896
 897         /*
 898          * Wait for stable hardware.
 899          */
 900         for (i = 0; i < 100; i++) {
 901                 rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
 902                 if (reg)
 903                         break;
 904                 msleep(1);
 905         }
 906
 907         if (!reg) {
 908                 ERROR(rt2x00dev, "Unstable hardware.\n");
 909                 return -EBUSY;
 910         }
 911
 912         /*
 913          * Prepare MCU and mailbox for firmware loading.
 914          */
 915         reg = 0;
 916         rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 1);
 917         rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
 918         rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff);
 919         rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 920         rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, 0);
 921
 922         /*
 923          * Write firmware to device.
 924          */
 925         reg = 0;
 926         rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 1);
 927         rt2x00_set_field32(&reg, MCU_CNTL_CSR_SELECT_BANK, 1);
 928         rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
 929
 930         rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
 931                                       data, len);
 932
 933         rt2x00_set_field32(&reg, MCU_CNTL_CSR_SELECT_BANK, 0);
 934         rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
 935
 936         rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 0);
 937         rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
 938
 939         for (i = 0; i < 100; i++) {
 940                 rt2x00pci_register_read(rt2x00dev, MCU_CNTL_CSR, &reg);
 941                 if (rt2x00_get_field32(reg, MCU_CNTL_CSR_READY))
 942                         break;
 943                 msleep(1);
 944         }
 945
 946         if (i == 100) {
 947                 ERROR(rt2x00dev, "MCU Control register not ready.\n");
 948                 return -EBUSY;
 949         }
 950
 951         /*
 952          * Reset MAC and BBP registers.
 953          */
 954         reg = 0;
 955         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
 956         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
 957         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
 958
 959         rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
 960         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
 961         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
 962         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
 963
 964         rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
 965         rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
 966         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
 967
 968         return 0;
 969 }
 970
 971 static void rt61pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
 972                                  struct queue_entry *entry)
 973 {
 974         struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data;
 975         u32 word;
 976
 977         rt2x00_desc_read(priv_rx->desc, 5, &word);
 978         rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS, priv_rx->dma);
 979         rt2x00_desc_write(priv_rx->desc, 5, word);
 980
 981         rt2x00_desc_read(priv_rx->desc, 0, &word);
 982         rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
 983         rt2x00_desc_write(priv_rx->desc, 0, word);
 984 }
 985
 986 static void rt61pci_init_txentry(struct rt2x00_dev *rt2x00dev,
 987                                  struct queue_entry *entry)
 988 {
 989         struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data;
 990         u32 word;
 991
 992         rt2x00_desc_read(priv_tx->desc, 1, &word);
 993         rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
 994         rt2x00_desc_write(priv_tx->desc, 1, word);
 995
 996         rt2x00_desc_read(priv_tx->desc, 5, &word);
 997         rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->queue->qid);
 998         rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, entry->entry_idx);
 999         rt2x00_desc_write(priv_tx->desc, 5, word);
1000
1001         rt2x00_desc_read(priv_tx->desc, 6, &word);
1002         rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, priv_tx->dma);
1003         rt2x00_desc_write(priv_tx->desc, 6, word);
1004
1005         rt2x00_desc_read(priv_tx->desc, 0, &word);
1006         rt2x00_set_field32(&word, TXD_W0_VALID, 0);
1007         rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
1008         rt2x00_desc_write(priv_tx->desc, 0, word);
1009 }
1010
1011 static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev)
1012 {
1013         struct queue_entry_priv_pci_rx *priv_rx;
1014         struct queue_entry_priv_pci_tx *priv_tx;
1015         u32 reg;
1016
1017         /*
1018          * Initialize registers.
1019          */
1020         rt2x00pci_register_read(rt2x00dev, TX_RING_CSR0, &reg);
1021         rt2x00_set_field32(&reg, TX_RING_CSR0_AC0_RING_SIZE,
1022                            rt2x00dev->tx[0].limit);
1023         rt2x00_set_field32(&reg, TX_RING_CSR0_AC1_RING_SIZE,
1024                            rt2x00dev->tx[1].limit);
1025         rt2x00_set_field32(&reg, TX_RING_CSR0_AC2_RING_SIZE,
1026                            rt2x00dev->tx[2].limit);
1027         rt2x00_set_field32(&reg, TX_RING_CSR0_AC3_RING_SIZE,
1028                            rt2x00dev->tx[3].limit);
1029         rt2x00pci_register_write(rt2x00dev, TX_RING_CSR0, reg);
1030
1031         rt2x00pci_register_read(rt2x00dev, TX_RING_CSR1, &reg);
1032         rt2x00_set_field32(&reg, TX_RING_CSR1_TXD_SIZE,
1033                            rt2x00dev->tx[0].desc_size / 4);
1034         rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg);
1035
1036         priv_tx = rt2x00dev->tx[0].entries[0].priv_data;
1037         rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, &reg);
1038         rt2x00_set_field32(&reg, AC0_BASE_CSR_RING_REGISTER, priv_tx->dma);
1039         rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg);
1040
1041         priv_tx = rt2x00dev->tx[1].entries[0].priv_data;
1042         rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, &reg);
1043         rt2x00_set_field32(&reg, AC1_BASE_CSR_RING_REGISTER, priv_tx->dma);
1044         rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg);
1045
1046         priv_tx = rt2x00dev->tx[2].entries[0].priv_data;
1047         rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, &reg);
1048         rt2x00_set_field32(&reg, AC2_BASE_CSR_RING_REGISTER, priv_tx->dma);
1049         rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg);
1050
1051         priv_tx = rt2x00dev->tx[3].entries[0].priv_data;
1052         rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, &reg);
1053         rt2x00_set_field32(&reg, AC3_BASE_CSR_RING_REGISTER, priv_tx->dma);
1054         rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg);
1055
1056         rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, &reg);
1057         rt2x00_set_field32(&reg, RX_RING_CSR_RING_SIZE, rt2x00dev->rx->limit);
1058         rt2x00_set_field32(&reg, RX_RING_CSR_RXD_SIZE,
1059                            rt2x00dev->rx->desc_size / 4);
1060         rt2x00_set_field32(&reg, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4);
1061         rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg);
1062
1063         priv_rx = rt2x00dev->rx->entries[0].priv_data;
1064         rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, &reg);
1065         rt2x00_set_field32(&reg, RX_BASE_CSR_RING_REGISTER, priv_rx->dma);
1066         rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg);
1067
1068         rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, &reg);
1069         rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC0, 2);
1070         rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC1, 2);
1071         rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC2, 2);
1072         rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC3, 2);
1073         rt2x00pci_register_write(rt2x00dev, TX_DMA_DST_CSR, reg);
1074
1075         rt2x00pci_register_read(rt2x00dev, LOAD_TX_RING_CSR, &reg);
1076         rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC0, 1);
1077         rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1);
1078         rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1);
1079         rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1);
1080         rt2x00pci_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg);
1081
1082         rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, &reg);
1083         rt2x00_set_field32(&reg, RX_CNTL_CSR_LOAD_RXD, 1);
1084         rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg);
1085
1086         return 0;
1087 }
1088
1089 static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev)
1090 {
1091         u32 reg;
1092
1093         rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
1094         rt2x00_set_field32(&reg, TXRX_CSR0_AUTO_TX_SEQ, 1);
1095         rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 0);
1096         rt2x00_set_field32(&reg, TXRX_CSR0_TX_WITHOUT_WAITING, 0);
1097         rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
1098
1099         rt2x00pci_register_read(rt2x00dev, TXRX_CSR1, &reg);
1100         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */
1101         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0_VALID, 1);
1102         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1, 30); /* Rssi */
1103         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1_VALID, 1);
1104         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */
1105         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2_VALID, 1);
1106         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3, 30); /* Rssi */
1107         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3_VALID, 1);
1108         rt2x00pci_register_write(rt2x00dev, TXRX_CSR1, reg);
1109
1110         /*
1111          * CCK TXD BBP registers
1112          */
1113         rt2x00pci_register_read(rt2x00dev, TXRX_CSR2, &reg);
1114         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0, 13);
1115         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0_VALID, 1);
1116         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1, 12);
1117         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1_VALID, 1);
1118         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2, 11);
1119         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2_VALID, 1);
1120         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3, 10);
1121         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3_VALID, 1);
1122         rt2x00pci_register_write(rt2x00dev, TXRX_CSR2, reg);
1123
1124         /*
1125          * OFDM TXD BBP registers
1126          */
1127         rt2x00pci_register_read(rt2x00dev, TXRX_CSR3, &reg);
1128         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0, 7);
1129         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0_VALID, 1);
1130         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1, 6);
1131         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1_VALID, 1);
1132         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2, 5);
1133         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2_VALID, 1);
1134         rt2x00pci_register_write(rt2x00dev, TXRX_CSR3, reg);
1135
1136         rt2x00pci_register_read(rt2x00dev, TXRX_CSR7, &reg);
1137         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_6MBS, 59);
1138         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_9MBS, 53);
1139         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_12MBS, 49);
1140         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_18MBS, 46);
1141         rt2x00pci_register_write(rt2x00dev, TXRX_CSR7, reg);
1142
1143         rt2x00pci_register_read(rt2x00dev, TXRX_CSR8, &reg);
1144         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_24MBS, 44);
1145         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_36MBS, 42);
1146         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_48MBS, 42);
1147         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
1148         rt2x00pci_register_write(rt2x00dev, TXRX_CSR8, reg);
1149
1150         rt2x00pci_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
1151
1152         rt2x00pci_register_write(rt2x00dev, MAC_CSR6, 0x00000fff);
1153
1154         rt2x00pci_register_read(rt2x00dev, MAC_CSR9, &reg);
1155         rt2x00_set_field32(&reg, MAC_CSR9_CW_SELECT, 0);
1156         rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg);
1157
1158         rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x0000071c);
1159
1160         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
1161                 return -EBUSY;
1162
1163         rt2x00pci_register_write(rt2x00dev, MAC_CSR13, 0x0000e000);
1164
1165         rt2x00pci_register_read(rt2x00dev, MAC_CSR14, &reg);
1166         rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, 70);
1167         rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, 30);
1168         rt2x00pci_register_write(rt2x00dev, MAC_CSR14, reg);
1169
1170         /*
1171          * Invalidate all Shared Keys (SEC_CSR0),
1172          * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
1173          */
1174         rt2x00pci_register_write(rt2x00dev, SEC_CSR0, 0x00000000);
1175         rt2x00pci_register_write(rt2x00dev, SEC_CSR1, 0x00000000);
1176         rt2x00pci_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
1177
1178         rt2x00pci_register_write(rt2x00dev, PHY_CSR1, 0x000023b0);
1179         rt2x00pci_register_write(rt2x00dev, PHY_CSR5, 0x060a100c);
1180         rt2x00pci_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
1181         rt2x00pci_register_write(rt2x00dev, PHY_CSR7, 0x00000a08);
1182
1183         rt2x00pci_register_write(rt2x00dev, PCI_CFG_CSR, 0x28ca4404);
1184
1185         rt2x00pci_register_write(rt2x00dev, TEST_MODE_CSR, 0x00000200);
1186
1187         rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff);
1188
1189         rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
1190         rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC0_TX_OP, 0);
1191         rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC1_TX_OP, 0);
1192         rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
1193
1194         rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
1195         rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC2_TX_OP, 192);
1196         rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC3_TX_OP, 48);
1197         rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
1198
1199         /*
1200          * Clear all beacons
1201          * For the Beacon base registers we only need to clear
1202          * the first byte since that byte contains the VALID and OWNER
1203          * bits which (when set to 0) will invalidate the entire beacon.
1204          */
1205         rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
1206         rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
1207         rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
1208         rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
1209
1210         /*
1211          * We must clear the error counters.
1212          * These registers are cleared on read,
1213          * so we may pass a useless variable to store the value.
1214          */
1215         rt2x00pci_register_read(rt2x00dev, STA_CSR0, &reg);
1216         rt2x00pci_register_read(rt2x00dev, STA_CSR1, &reg);
1217         rt2x00pci_register_read(rt2x00dev, STA_CSR2, &reg);
1218
1219         /*
1220          * Reset MAC and BBP registers.
1221          */
1222         rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1223         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
1224         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
1225         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1226
1227         rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1228         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
1229         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
1230         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1231
1232         rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1233         rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
1234         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1235
1236         return 0;
1237 }
1238
1239 static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev)
1240 {
1241         unsigned int i;
1242         u16 eeprom;
1243         u8 reg_id;
1244         u8 value;
1245
1246         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1247                 rt61pci_bbp_read(rt2x00dev, 0, &value);
1248                 if ((value != 0xff) && (value != 0x00))
1249                         goto continue_csr_init;
1250                 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
1251                 udelay(REGISTER_BUSY_DELAY);
1252         }
1253
1254         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
1255         return -EACCES;
1256
1257 continue_csr_init:
1258         rt61pci_bbp_write(rt2x00dev, 3, 0x00);
1259         rt61pci_bbp_write(rt2x00dev, 15, 0x30);
1260         rt61pci_bbp_write(rt2x00dev, 21, 0xc8);
1261         rt61pci_bbp_write(rt2x00dev, 22, 0x38);
1262         rt61pci_bbp_write(rt2x00dev, 23, 0x06);
1263         rt61pci_bbp_write(rt2x00dev, 24, 0xfe);
1264         rt61pci_bbp_write(rt2x00dev, 25, 0x0a);
1265         rt61pci_bbp_write(rt2x00dev, 26, 0x0d);
1266         rt61pci_bbp_write(rt2x00dev, 34, 0x12);
1267         rt61pci_bbp_write(rt2x00dev, 37, 0x07);
1268         rt61pci_bbp_write(rt2x00dev, 39, 0xf8);
1269         rt61pci_bbp_write(rt2x00dev, 41, 0x60);
1270         rt61pci_bbp_write(rt2x00dev, 53, 0x10);
1271         rt61pci_bbp_write(rt2x00dev, 54, 0x18);
1272         rt61pci_bbp_write(rt2x00dev, 60, 0x10);
1273         rt61pci_bbp_write(rt2x00dev, 61, 0x04);
1274         rt61pci_bbp_write(rt2x00dev, 62, 0x04);
1275         rt61pci_bbp_write(rt2x00dev, 75, 0xfe);
1276         rt61pci_bbp_write(rt2x00dev, 86, 0xfe);
1277         rt61pci_bbp_write(rt2x00dev, 88, 0xfe);
1278         rt61pci_bbp_write(rt2x00dev, 90, 0x0f);
1279         rt61pci_bbp_write(rt2x00dev, 99, 0x00);
1280         rt61pci_bbp_write(rt2x00dev, 102, 0x16);
1281         rt61pci_bbp_write(rt2x00dev, 107, 0x04);
1282
1283         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1284                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1285
1286                 if (eeprom != 0xffff && eeprom != 0x0000) {
1287                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1288                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1289                         rt61pci_bbp_write(rt2x00dev, reg_id, value);
1290                 }
1291         }
1292
1293         return 0;
1294 }
1295
1296 /*
1297  * Device state switch handlers.
1298  */
1299 static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
1300                               enum dev_state state)
1301 {
1302         u32 reg;
1303
1304         rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
1305         rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX,
1306                            state == STATE_RADIO_RX_OFF);
1307         rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
1308 }
1309
1310 static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
1311                                enum dev_state state)
1312 {
1313         int mask = (state == STATE_RADIO_IRQ_OFF);
1314         u32 reg;
1315
1316         /*
1317          * When interrupts are being enabled, the interrupt registers
1318          * should clear the register to assure a clean state.
1319          */
1320         if (state == STATE_RADIO_IRQ_ON) {
1321                 rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
1322                 rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
1323
1324                 rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, &reg);
1325                 rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg);
1326         }
1327
1328         /*
1329          * Only toggle the interrupts bits we are going to use.
1330          * Non-checked interrupt bits are disabled by default.
1331          */
1332         rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, &reg);
1333         rt2x00_set_field32(&reg, INT_MASK_CSR_TXDONE, mask);
1334         rt2x00_set_field32(&reg, INT_MASK_CSR_RXDONE, mask);
1335         rt2x00_set_field32(&reg, INT_MASK_CSR_ENABLE_MITIGATION, mask);
1336         rt2x00_set_field32(&reg, INT_MASK_CSR_MITIGATION_PERIOD, 0xff);
1337         rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
1338
1339         rt2x00pci_register_read(rt2x00dev, MCU_INT_MASK_CSR, &reg);
1340         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_0, mask);
1341         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_1, mask);
1342         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_2, mask);
1343         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_3, mask);
1344         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_4, mask);
1345         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_5, mask);
1346         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_6, mask);
1347         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_7, mask);
1348         rt2x00pci_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg);
1349 }
1350
1351 static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev)
1352 {
1353         u32 reg;
1354
1355         /*
1356          * Initialize all registers.
1357          */
1358         if (rt61pci_init_queues(rt2x00dev) ||
1359             rt61pci_init_registers(rt2x00dev) ||
1360             rt61pci_init_bbp(rt2x00dev)) {
1361                 ERROR(rt2x00dev, "Register initialization failed.\n");
1362                 return -EIO;
1363         }
1364
1365         /*
1366          * Enable interrupts.
1367          */
1368         rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON);
1369
1370         /*
1371          * Enable RX.
1372          */
1373         rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, &reg);
1374         rt2x00_set_field32(&reg, RX_CNTL_CSR_ENABLE_RX_DMA, 1);
1375         rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg);
1376
1377         return 0;
1378 }
1379
1380 static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev)
1381 {
1382         u32 reg;
1383
1384         rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
1385
1386         /*
1387          * Disable synchronisation.
1388          */
1389         rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0);
1390
1391         /*
1392          * Cancel RX and TX.
1393          */
1394         rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
1395         rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC0, 1);
1396         rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC1, 1);
1397         rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC2, 1);
1398         rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC3, 1);
1399         rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
1400
1401         /*
1402          * Disable interrupts.
1403          */
1404         rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF);
1405 }
1406
1407 static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
1408 {
1409         u32 reg;
1410         unsigned int i;
1411         char put_to_sleep;
1412         char current_state;
1413
1414         put_to_sleep = (state != STATE_AWAKE);
1415
1416         rt2x00pci_register_read(rt2x00dev, MAC_CSR12, &reg);
1417         rt2x00_set_field32(&reg, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep);
1418         rt2x00_set_field32(&reg, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep);
1419         rt2x00pci_register_write(rt2x00dev, MAC_CSR12, reg);
1420
1421         /*
1422          * Device is not guaranteed to be in the requested state yet.
1423          * We must wait until the register indicates that the
1424          * device has entered the correct state.
1425          */
1426         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1427                 rt2x00pci_register_read(rt2x00dev, MAC_CSR12, &reg);
1428                 current_state =
1429                     rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
1430                 if (current_state == !put_to_sleep)
1431                         return 0;
1432                 msleep(10);
1433         }
1434
1435         NOTICE(rt2x00dev, "Device failed to enter state %d, "
1436                "current device state %d.\n", !put_to_sleep, current_state);
1437
1438         return -EBUSY;
1439 }
1440
1441 static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
1442                                     enum dev_state state)
1443 {
1444         int retval = 0;
1445
1446         switch (state) {
1447         case STATE_RADIO_ON:
1448                 retval = rt61pci_enable_radio(rt2x00dev);
1449                 break;
1450         case STATE_RADIO_OFF:
1451                 rt61pci_disable_radio(rt2x00dev);
1452                 break;
1453         case STATE_RADIO_RX_ON:
1454         case STATE_RADIO_RX_ON_LINK:
1455                 rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
1456                 break;
1457         case STATE_RADIO_RX_OFF:
1458         case STATE_RADIO_RX_OFF_LINK:
1459                 rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
1460                 break;
1461         case STATE_DEEP_SLEEP:
1462         case STATE_SLEEP:
1463         case STATE_STANDBY:
1464         case STATE_AWAKE:
1465                 retval = rt61pci_set_state(rt2x00dev, state);
1466                 break;
1467         default:
1468                 retval = -ENOTSUPP;
1469                 break;
1470         }
1471
1472         return retval;
1473 }
1474
1475 /*
1476  * TX descriptor initialization
1477  */
1478 static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1479                                     struct sk_buff *skb,
1480                                     struct txentry_desc *txdesc,
1481                                     struct ieee80211_tx_control *control)
1482 {
1483         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
1484         __le32 *txd = skbdesc->desc;
1485         u32 word;
1486
1487         /*
1488          * Start writing the descriptor words.
1489          */
1490         rt2x00_desc_read(txd, 1, &word);
1491         rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue);
1492         rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
1493         rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
1494         rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
1495         rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
1496         rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
1497         rt2x00_desc_write(txd, 1, word);
1498
1499         rt2x00_desc_read(txd, 2, &word);
1500         rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal);
1501         rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service);
1502         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low);
1503         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
1504         rt2x00_desc_write(txd, 2, word);
1505
1506         rt2x00_desc_read(txd, 5, &word);
1507 /* XXX: removed for now
1508         rt2x00_set_field32(&word, TXD_W5_TX_POWER,
1509                            TXPOWER_TO_DEV(control->power_level));
1510  */
1511         rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
1512         rt2x00_desc_write(txd, 5, word);
1513
1514         if (skbdesc->desc_len > TXINFO_SIZE) {
1515                 rt2x00_desc_read(txd, 11, &word);
1516                 rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skbdesc->data_len);
1517                 rt2x00_desc_write(txd, 11, word);
1518         }
1519
1520         rt2x00_desc_read(txd, 0, &word);
1521         rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
1522         rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1523         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1524                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
1525         rt2x00_set_field32(&word, TXD_W0_ACK,
1526                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
1527         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1528                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
1529         rt2x00_set_field32(&word, TXD_W0_OFDM,
1530                            test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags));
1531         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
1532         rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1533                            !!(control->flags &
1534                               IEEE80211_TXCTL_LONG_RETRY_LIMIT));
1535         rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
1536         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len);
1537         rt2x00_set_field32(&word, TXD_W0_BURST,
1538                            test_bit(ENTRY_TXD_BURST, &txdesc->flags));
1539         rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
1540         rt2x00_desc_write(txd, 0, word);
1541 }
1542
1543 /*
1544  * TX data initialization
1545  */
1546 static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1547                                   const unsigned int queue)
1548 {
1549         u32 reg;
1550
1551         if (queue == RT2X00_BCN_QUEUE_BEACON) {
1552                 /*
1553                  * For Wi-Fi faily generated beacons between participating
1554                  * stations. Set TBTT phase adaptive adjustment step to 8us.
1555                  */
1556                 rt2x00pci_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
1557
1558                 rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
1559                 if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
1560                         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
1561                         rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
1562                 }
1563                 return;
1564         }
1565
1566         rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
1567         rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC0,
1568                            (queue == IEEE80211_TX_QUEUE_DATA0));
1569         rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC1,
1570                            (queue == IEEE80211_TX_QUEUE_DATA1));
1571         rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC2,
1572                            (queue == IEEE80211_TX_QUEUE_DATA2));
1573         rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC3,
1574                            (queue == IEEE80211_TX_QUEUE_DATA3));
1575         rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
1576 }
1577
1578 /*
1579  * RX control handlers
1580  */
1581 static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
1582 {
1583         u16 eeprom;
1584         u8 offset;
1585         u8 lna;
1586
1587         lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
1588         switch (lna) {
1589         case 3:
1590                 offset = 90;
1591                 break;
1592         case 2:
1593                 offset = 74;
1594                 break;
1595         case 1:
1596                 offset = 64;
1597                 break;
1598         default:
1599                 return 0;
1600         }
1601
1602         if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
1603                 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
1604                         offset += 14;
1605
1606                 if (lna == 3 || lna == 2)
1607                         offset += 10;
1608
1609                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
1610                 offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
1611         } else {
1612                 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
1613                         offset += 14;
1614
1615                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
1616                 offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
1617         }
1618
1619         return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
1620 }
1621
1622 static void rt61pci_fill_rxdone(struct queue_entry *entry,
1623                                 struct rxdone_entry_desc *rxdesc)
1624 {
1625         struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data;
1626         u32 word0;
1627         u32 word1;
1628
1629         rt2x00_desc_read(priv_rx->desc, 0, &word0);
1630         rt2x00_desc_read(priv_rx->desc, 1, &word1);
1631
1632         rxdesc->flags = 0;
1633         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1634                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
1635
1636         /*
1637          * Obtain the status about this packet.
1638          */
1639         rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1640         rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1);
1641         rxdesc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
1642         rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1643         rxdesc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS);
1644 }
1645
1646 /*
1647  * Interrupt functions.
1648  */
1649 static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
1650 {
1651         struct data_queue *queue;
1652         struct queue_entry *entry;
1653         struct queue_entry *entry_done;
1654         struct queue_entry_priv_pci_tx *priv_tx;
1655         struct txdone_entry_desc txdesc;
1656         u32 word;
1657         u32 reg;
1658         u32 old_reg;
1659         int type;
1660         int index;
1661
1662         /*
1663          * During each loop we will compare the freshly read
1664          * STA_CSR4 register value with the value read from
1665          * the previous loop. If the 2 values are equal then
1666          * we should stop processing because the chance it
1667          * quite big that the device has been unplugged and
1668          * we risk going into an endless loop.
1669          */
1670         old_reg = 0;
1671
1672         while (1) {
1673                 rt2x00pci_register_read(rt2x00dev, STA_CSR4, &reg);
1674                 if (!rt2x00_get_field32(reg, STA_CSR4_VALID))
1675                         break;
1676
1677                 if (old_reg == reg)
1678                         break;
1679                 old_reg = reg;
1680
1681                 /*
1682                  * Skip this entry when it contains an invalid
1683                  * queue identication number.
1684                  */
1685                 type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE);
1686                 queue = rt2x00queue_get_queue(rt2x00dev, type);
1687                 if (unlikely(!queue))
1688                         continue;
1689
1690                 /*
1691                  * Skip this entry when it contains an invalid
1692                  * index number.
1693                  */
1694                 index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE);
1695                 if (unlikely(index >= queue->limit))
1696                         continue;
1697
1698                 entry = &queue->entries[index];
1699                 priv_tx = entry->priv_data;
1700                 rt2x00_desc_read(priv_tx->desc, 0, &word);
1701
1702                 if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
1703                     !rt2x00_get_field32(word, TXD_W0_VALID))
1704                         return;
1705
1706                 entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
1707                 while (entry != entry_done) {
1708                         /* Catch up.
1709                          * Just report any entries we missed as failed.
1710                          */
1711                         WARNING(rt2x00dev,
1712                                 "TX status report missed for entry %d\n",
1713                                 entry_done->entry_idx);
1714
1715                         txdesc.status = TX_FAIL_OTHER;
1716                         txdesc.retry = 0;
1717
1718                         rt2x00pci_txdone(rt2x00dev, entry_done, &txdesc);
1719                         entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
1720                 }
1721
1722                 /*
1723                  * Obtain the status about this packet.
1724                  */
1725                 txdesc.status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT);
1726                 txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT);
1727
1728                 rt2x00pci_txdone(rt2x00dev, entry, &txdesc);
1729         }
1730 }
1731
1732 static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
1733 {
1734         struct rt2x00_dev *rt2x00dev = dev_instance;
1735         u32 reg_mcu;
1736         u32 reg;
1737
1738         /*
1739          * Get the interrupt sources & saved to local variable.
1740          * Write register value back to clear pending interrupts.
1741          */
1742         rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, &reg_mcu);
1743         rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu);
1744
1745         rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
1746         rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
1747
1748         if (!reg && !reg_mcu)
1749                 return IRQ_NONE;
1750
1751         if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
1752                 return IRQ_HANDLED;
1753
1754         /*
1755          * Handle interrupts, walk through all bits
1756          * and run the tasks, the bits are checked in order of
1757          * priority.
1758          */
1759
1760         /*
1761          * 1 - Rx ring done interrupt.
1762          */
1763         if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RXDONE))
1764                 rt2x00pci_rxdone(rt2x00dev);
1765
1766         /*
1767          * 2 - Tx ring done interrupt.
1768          */
1769         if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TXDONE))
1770                 rt61pci_txdone(rt2x00dev);
1771
1772         /*
1773          * 3 - Handle MCU command done.
1774          */
1775         if (reg_mcu)
1776                 rt2x00pci_register_write(rt2x00dev,
1777                                          M2H_CMD_DONE_CSR, 0xffffffff);
1778
1779         return IRQ_HANDLED;
1780 }
1781
1782 /*
1783  * Device probe functions.
1784  */
1785 static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1786 {
1787         struct eeprom_93cx6 eeprom;
1788         u32 reg;
1789         u16 word;
1790         u8 *mac;
1791         s8 value;
1792
1793         rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
1794
1795         eeprom.data = rt2x00dev;
1796         eeprom.register_read = rt61pci_eepromregister_read;
1797         eeprom.register_write = rt61pci_eepromregister_write;
1798         eeprom.width = rt2x00_get_field32(reg, E2PROM_CSR_TYPE_93C46) ?
1799             PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
1800         eeprom.reg_data_in = 0;
1801         eeprom.reg_data_out = 0;
1802         eeprom.reg_data_clock = 0;
1803         eeprom.reg_chip_select = 0;
1804
1805         eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
1806                                EEPROM_SIZE / sizeof(u16));
1807
1808         /*
1809          * Start validation of the data that has been read.
1810          */
1811         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1812         if (!is_valid_ether_addr(mac)) {
1813                 DECLARE_MAC_BUF(macbuf);
1814
1815                 random_ether_addr(mac);
1816                 EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
1817         }
1818
1819         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1820         if (word == 0xffff) {
1821                 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1822                 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
1823                                    ANTENNA_B);
1824                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
1825                                    ANTENNA_B);
1826                 rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0);
1827                 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1828                 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1829                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5225);
1830                 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1831                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1832         }
1833
1834         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1835         if (word == 0xffff) {
1836                 rt2x00_set_field16(&word, EEPROM_NIC_ENABLE_DIVERSITY, 0);
1837                 rt2x00_set_field16(&word, EEPROM_NIC_TX_DIVERSITY, 0);
1838                 rt2x00_set_field16(&word, EEPROM_NIC_TX_RX_FIXED, 0);
1839                 rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
1840                 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
1841                 rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
1842                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1843                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1844         }
1845
1846         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word);
1847         if (word == 0xffff) {
1848                 rt2x00_set_field16(&word, EEPROM_LED_LED_MODE,
1849                                    LED_MODE_DEFAULT);
1850                 rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word);
1851                 EEPROM(rt2x00dev, "Led: 0x%04x\n", word);
1852         }
1853
1854         rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
1855         if (word == 0xffff) {
1856                 rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
1857                 rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0);
1858                 rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
1859                 EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
1860         }
1861
1862         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word);
1863         if (word == 0xffff) {
1864                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1865                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1866                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1867                 EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
1868         } else {
1869                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1);
1870                 if (value < -10 || value > 10)
1871                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1872                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2);
1873                 if (value < -10 || value > 10)
1874                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1875                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1876         }
1877
1878         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word);
1879         if (word == 0xffff) {
1880                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1881                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1882                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
1883                 EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word);
1884         } else {
1885                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
1886                 if (value < -10 || value > 10)
1887                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1888                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2);
1889                 if (value < -10 || value > 10)
1890                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1891                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
1892         }
1893
1894         return 0;
1895 }
1896
1897 static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
1898 {
1899         u32 reg;
1900         u16 value;
1901         u16 eeprom;
1902         u16 device;
1903
1904         /*
1905          * Read EEPROM word for configuration.
1906          */
1907         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1908
1909         /*
1910          * Identify RF chipset.
1911          * To determine the RT chip we have to read the
1912          * PCI header of the device.
1913          */
1914         pci_read_config_word(rt2x00dev_pci(rt2x00dev),
1915                              PCI_CONFIG_HEADER_DEVICE, &device);
1916         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1917         rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
1918         rt2x00_set_chip(rt2x00dev, device, value, reg);
1919
1920         if (!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
1921             !rt2x00_rf(&rt2x00dev->chip, RF5325) &&
1922             !rt2x00_rf(&rt2x00dev->chip, RF2527) &&
1923             !rt2x00_rf(&rt2x00dev->chip, RF2529)) {
1924                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1925                 return -ENODEV;
1926         }
1927
1928         /*
1929          * Determine number of antenna's.
1930          */
1931         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2)
1932                 __set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags);
1933
1934         /*
1935          * Identify default antenna configuration.
1936          */
1937         rt2x00dev->default_ant.tx =
1938             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1939         rt2x00dev->default_ant.rx =
1940             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1941
1942         /*
1943          * Read the Frame type.
1944          */
1945         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
1946                 __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
1947
1948         /*
1949          * Detect if this device has an hardware controlled radio.
1950          */
1951 #ifdef CONFIG_RT61PCI_RFKILL
1952         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
1953                 __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
1954 #endif /* CONFIG_RT61PCI_RFKILL */
1955
1956         /*
1957          * Read frequency offset and RF programming sequence.
1958          */
1959         rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
1960         if (rt2x00_get_field16(eeprom, EEPROM_FREQ_SEQ))
1961                 __set_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags);
1962
1963         rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
1964
1965         /*
1966          * Read external LNA informations.
1967          */
1968         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1969
1970         if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
1971                 __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
1972         if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
1973                 __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
1974
1975         /*
1976          * When working with a RF2529 chip without double antenna
1977          * the antenna settings should be gathered from the NIC
1978          * eeprom word.
1979          */
1980         if (rt2x00_rf(&rt2x00dev->chip, RF2529) &&
1981             !test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) {
1982                 switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) {
1983                 case 0:
1984                         rt2x00dev->default_ant.tx = ANTENNA_B;
1985                         rt2x00dev->default_ant.rx = ANTENNA_A;
1986                         break;
1987                 case 1:
1988                         rt2x00dev->default_ant.tx = ANTENNA_B;
1989                         rt2x00dev->default_ant.rx = ANTENNA_B;
1990                         break;
1991                 case 2:
1992                         rt2x00dev->default_ant.tx = ANTENNA_A;
1993                         rt2x00dev->default_ant.rx = ANTENNA_A;
1994                         break;
1995                 case 3:
1996                         rt2x00dev->default_ant.tx = ANTENNA_A;
1997                         rt2x00dev->default_ant.rx = ANTENNA_B;
1998                         break;
1999                 }
2000
2001                 if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY))
2002                         rt2x00dev->default_ant.tx = ANTENNA_SW_DIVERSITY;
2003                 if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY))
2004                         rt2x00dev->default_ant.rx = ANTENNA_SW_DIVERSITY;
2005         }
2006
2007         /*
2008          * Store led settings, for correct led behaviour.
2009          * If the eeprom value is invalid,
2010          * switch to default led mode.
2011          */
2012 #ifdef CONFIG_RT61PCI_LEDS
2013         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
2014
2015         value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);
2016
2017         switch (value) {
2018         case LED_MODE_TXRX_ACTIVITY:
2019         case LED_MODE_ASUS:
2020         case LED_MODE_ALPHA:
2021         case LED_MODE_DEFAULT:
2022                 rt2x00dev->led_flags =
2023                     LED_SUPPORT_RADIO | LED_SUPPORT_ASSOC;
2024                 break;
2025         case LED_MODE_SIGNAL_STRENGTH:
2026                 rt2x00dev->led_flags =
2027                     LED_SUPPORT_RADIO | LED_SUPPORT_ASSOC |
2028                     LED_SUPPORT_QUALITY;
2029                 break;
2030         }
2031
2032         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value);
2033         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0,
2034                            rt2x00_get_field16(eeprom,
2035                                               EEPROM_LED_POLARITY_GPIO_0));
2036         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1,
2037                            rt2x00_get_field16(eeprom,
2038                                               EEPROM_LED_POLARITY_GPIO_1));
2039         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2,
2040                            rt2x00_get_field16(eeprom,
2041                                               EEPROM_LED_POLARITY_GPIO_2));
2042         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3,
2043                            rt2x00_get_field16(eeprom,
2044                                               EEPROM_LED_POLARITY_GPIO_3));
2045         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4,
2046                            rt2x00_get_field16(eeprom,
2047                                               EEPROM_LED_POLARITY_GPIO_4));
2048         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT,
2049                            rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
2050         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG,
2051                            rt2x00_get_field16(eeprom,
2052                                               EEPROM_LED_POLARITY_RDY_G));
2053         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
2054                            rt2x00_get_field16(eeprom,
2055                                               EEPROM_LED_POLARITY_RDY_A));
2056 #endif /* CONFIG_RT61PCI_LEDS */
2057
2058         return 0;
2059 }
2060
2061 /*
2062  * RF value list for RF5225 & RF5325
2063  * Supports: 2.4 GHz & 5.2 GHz, rf_sequence disabled
2064  */
2065 static const struct rf_channel rf_vals_noseq[] = {
2066         { 1,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
2067         { 2,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
2068         { 3,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
2069         { 4,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
2070         { 5,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
2071         { 6,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
2072         { 7,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
2073         { 8,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
2074         { 9,  0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
2075         { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
2076         { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
2077         { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
2078         { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
2079         { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
2080
2081         /* 802.11 UNI / HyperLan 2 */
2082         { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 },
2083         { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 },
2084         { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b },
2085         { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 },
2086         { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b },
2087         { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 },
2088         { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 },
2089         { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b },
2090
2091         /* 802.11 HyperLan 2 */
2092         { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 },
2093         { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b },
2094         { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 },
2095         { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b },
2096         { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 },
2097         { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 },
2098         { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b },
2099         { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 },
2100         { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b },
2101         { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 },
2102
2103         /* 802.11 UNII */
2104         { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 },
2105         { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f },
2106         { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 },
2107         { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 },
2108         { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f },
2109         { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 },
2110
2111         /* MMAC(Japan)J52 ch 34,38,42,46 */
2112         { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b },
2113         { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 },
2114         { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b },
2115         { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 },
2116 };
2117
2118 /*
2119  * RF value list for RF5225 & RF5325
2120  * Supports: 2.4 GHz & 5.2 GHz, rf_sequence enabled
2121  */
2122 static const struct rf_channel rf_vals_seq[] = {
2123         { 1,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
2124         { 2,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
2125         { 3,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
2126         { 4,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
2127         { 5,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
2128         { 6,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
2129         { 7,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
2130         { 8,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
2131         { 9,  0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
2132         { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
2133         { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
2134         { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
2135         { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
2136         { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
2137
2138         /* 802.11 UNI / HyperLan 2 */
2139         { 36, 0x00002cd4, 0x0004481a, 0x00098455, 0x000c0a03 },
2140         { 40, 0x00002cd0, 0x00044682, 0x00098455, 0x000c0a03 },
2141         { 44, 0x00002cd0, 0x00044686, 0x00098455, 0x000c0a1b },
2142         { 48, 0x00002cd0, 0x0004468e, 0x00098655, 0x000c0a0b },
2143         { 52, 0x00002cd0, 0x00044692, 0x00098855, 0x000c0a23 },
2144         { 56, 0x00002cd0, 0x0004469a, 0x00098c55, 0x000c0a13 },
2145         { 60, 0x00002cd0, 0x000446a2, 0x00098e55, 0x000c0a03 },
2146         { 64, 0x00002cd0, 0x000446a6, 0x00099255, 0x000c0a1b },
2147
2148         /* 802.11 HyperLan 2 */
2149         { 100, 0x00002cd4, 0x0004489a, 0x000b9855, 0x000c0a03 },
2150         { 104, 0x00002cd4, 0x000448a2, 0x000b9855, 0x000c0a03 },
2151         { 108, 0x00002cd4, 0x000448aa, 0x000b9855, 0x000c0a03 },
2152         { 112, 0x00002cd4, 0x000448b2, 0x000b9a55, 0x000c0a03 },
2153         { 116, 0x00002cd4, 0x000448ba, 0x000b9a55, 0x000c0a03 },
2154         { 120, 0x00002cd0, 0x00044702, 0x000b9a55, 0x000c0a03 },
2155         { 124, 0x00002cd0, 0x00044706, 0x000b9a55, 0x000c0a1b },
2156         { 128, 0x00002cd0, 0x0004470e, 0x000b9c55, 0x000c0a0b },
2157         { 132, 0x00002cd0, 0x00044712, 0x000b9c55, 0x000c0a23 },
2158         { 136, 0x00002cd0, 0x0004471a, 0x000b9e55, 0x000c0a13 },
2159
2160         /* 802.11 UNII */
2161         { 140, 0x00002cd0, 0x00044722, 0x000b9e55, 0x000c0a03 },
2162         { 149, 0x00002cd0, 0x0004472e, 0x000ba255, 0x000c0a1b },
2163         { 153, 0x00002cd0, 0x00044736, 0x000ba255, 0x000c0a0b },
2164         { 157, 0x00002cd4, 0x0004490a, 0x000ba255, 0x000c0a17 },
2165         { 161, 0x00002cd4, 0x00044912, 0x000ba255, 0x000c0a17 },
2166         { 165, 0x00002cd4, 0x0004491a, 0x000ba255, 0x000c0a17 },
2167
2168         /* MMAC(Japan)J52 ch 34,38,42,46 */
2169         { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000c0a0b },
2170         { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000c0a13 },
2171         { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000c0a1b },
2172         { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 },
2173 };
2174
2175 static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
2176 {
2177         struct hw_mode_spec *spec = &rt2x00dev->spec;
2178         u8 *txpower;
2179         unsigned int i;
2180
2181         /*
2182          * Initialize all hw fields.
2183          */
2184         rt2x00dev->hw->flags =
2185             IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
2186             IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
2187         rt2x00dev->hw->extra_tx_headroom = 0;
2188         rt2x00dev->hw->max_signal = MAX_SIGNAL;
2189         rt2x00dev->hw->max_rssi = MAX_RX_SSI;
2190         rt2x00dev->hw->queues = 4;
2191
2192         SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
2193         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
2194                                 rt2x00_eeprom_addr(rt2x00dev,
2195                                                    EEPROM_MAC_ADDR_0));
2196
2197         /*
2198          * Convert tx_power array in eeprom.
2199          */
2200         txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
2201         for (i = 0; i < 14; i++)
2202                 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
2203
2204         /*
2205          * Initialize hw_mode information.
2206          */
2207         spec->num_modes = 2;
2208         spec->num_rates = 12;
2209         spec->tx_power_a = NULL;
2210         spec->tx_power_bg = txpower;
2211         spec->tx_power_default = DEFAULT_TXPOWER;
2212
2213         if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) {
2214                 spec->num_channels = 14;
2215                 spec->channels = rf_vals_noseq;
2216         } else {
2217                 spec->num_channels = 14;
2218                 spec->channels = rf_vals_seq;
2219         }
2220
2221         if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
2222             rt2x00_rf(&rt2x00dev->chip, RF5325)) {
2223                 spec->num_modes = 3;
2224                 spec->num_channels = ARRAY_SIZE(rf_vals_seq);
2225
2226                 txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
2227                 for (i = 0; i < 14; i++)
2228                         txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
2229
2230                 spec->tx_power_a = txpower;
2231         }
2232 }
2233
2234 static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
2235 {
2236         int retval;
2237
2238         /*
2239          * Allocate eeprom data.
2240          */
2241         retval = rt61pci_validate_eeprom(rt2x00dev);
2242         if (retval)
2243                 return retval;
2244
2245         retval = rt61pci_init_eeprom(rt2x00dev);
2246         if (retval)
2247                 return retval;
2248
2249         /*
2250          * Initialize hw specifications.
2251          */
2252         rt61pci_probe_hw_mode(rt2x00dev);
2253
2254         /*
2255          * This device requires firmware.
2256          */
2257         __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
2258         __set_bit(DRIVER_REQUIRE_FIRMWARE_CRC_ITU_T, &rt2x00dev->flags);
2259
2260         /*
2261          * Set the rssi offset.
2262          */
2263         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
2264
2265         return 0;
2266 }
2267
2268 /*
2269  * IEEE80211 stack callback functions.
2270  */
2271 static void rt61pci_configure_filter(struct ieee80211_hw *hw,
2272                                      unsigned int changed_flags,
2273                                      unsigned int *total_flags,
2274                                      int mc_count,
2275                                      struct dev_addr_list *mc_list)
2276 {
2277         struct rt2x00_dev *rt2x00dev = hw->priv;
2278         u32 reg;
2279
2280         /*
2281          * Mask off any flags we are going to ignore from
2282          * the total_flags field.
2283          */
2284         *total_flags &=
2285             FIF_ALLMULTI |
2286             FIF_FCSFAIL |
2287             FIF_PLCPFAIL |
2288             FIF_CONTROL |
2289             FIF_OTHER_BSS |
2290             FIF_PROMISC_IN_BSS;
2291
2292         /*
2293          * Apply some rules to the filters:
2294          * - Some filters imply different filters to be set.
2295          * - Some things we can't filter out at all.
2296          */
2297         if (mc_count)
2298                 *total_flags |= FIF_ALLMULTI;
2299         if (*total_flags & FIF_OTHER_BSS ||
2300             *total_flags & FIF_PROMISC_IN_BSS)
2301                 *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
2302
2303         /*
2304          * Check if there is any work left for us.
2305          */
2306         if (rt2x00dev->packet_filter == *total_flags)
2307                 return;
2308         rt2x00dev->packet_filter = *total_flags;
2309
2310         /*
2311          * Start configuration steps.
2312          * Note that the version error will always be dropped
2313          * and broadcast frames will always be accepted since
2314          * there is no filter for it at this time.
2315          */
2316         rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
2317         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC,
2318                            !(*total_flags & FIF_FCSFAIL));
2319         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL,
2320                            !(*total_flags & FIF_PLCPFAIL));
2321         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
2322                            !(*total_flags & FIF_CONTROL));
2323         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
2324                            !(*total_flags & FIF_PROMISC_IN_BSS));
2325         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
2326                            !(*total_flags & FIF_PROMISC_IN_BSS));
2327         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
2328         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
2329                            !(*total_flags & FIF_ALLMULTI));
2330         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BORADCAST, 0);
2331         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS, 1);
2332         rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
2333 }
2334
2335 static int rt61pci_set_retry_limit(struct ieee80211_hw *hw,
2336                                    u32 short_retry, u32 long_retry)
2337 {
2338         struct rt2x00_dev *rt2x00dev = hw->priv;
2339         u32 reg;
2340
2341         rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
2342         rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT, long_retry);
2343         rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT, short_retry);
2344         rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
2345
2346         return 0;
2347 }
2348
2349 static u64 rt61pci_get_tsf(struct ieee80211_hw *hw)
2350 {
2351         struct rt2x00_dev *rt2x00dev = hw->priv;
2352         u64 tsf;
2353         u32 reg;
2354
2355         rt2x00pci_register_read(rt2x00dev, TXRX_CSR13, &reg);
2356         tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
2357         rt2x00pci_register_read(rt2x00dev, TXRX_CSR12, &reg);
2358         tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);
2359
2360         return tsf;
2361 }
2362
2363 static void rt61pci_reset_tsf(struct ieee80211_hw *hw)
2364 {
2365         struct rt2x00_dev *rt2x00dev = hw->priv;
2366
2367         rt2x00pci_register_write(rt2x00dev, TXRX_CSR12, 0);
2368         rt2x00pci_register_write(rt2x00dev, TXRX_CSR13, 0);
2369 }
2370
2371 static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
2372                           struct ieee80211_tx_control *control)
2373 {
2374         struct rt2x00_dev *rt2x00dev = hw->priv;
2375         struct rt2x00_intf *intf = vif_to_intf(control->vif);
2376         struct skb_frame_desc *skbdesc;
2377         unsigned int beacon_base;
2378
2379         if (unlikely(!intf->beacon))
2380                 return -ENOBUFS;
2381
2382         /*
2383          * We need to append the descriptor in front of the
2384          * beacon frame.
2385          */
2386         if (skb_headroom(skb) < intf->beacon->queue->desc_size) {
2387                 if (pskb_expand_head(skb, intf->beacon->queue->desc_size,
2388                                      0, GFP_ATOMIC)) {
2389                         dev_kfree_skb(skb);
2390                         return -ENOMEM;
2391                 }
2392         }
2393
2394         /*
2395          * Add the descriptor in front of the skb.
2396          */
2397         skb_push(skb, intf->beacon->queue->desc_size);
2398         memset(skb->data, 0, intf->beacon->queue->desc_size);
2399
2400         /*
2401          * Fill in skb descriptor
2402          */
2403         skbdesc = get_skb_frame_desc(skb);
2404         memset(skbdesc, 0, sizeof(*skbdesc));
2405         skbdesc->data = skb->data + intf->beacon->queue->desc_size;
2406         skbdesc->data_len = skb->len - intf->beacon->queue->desc_size;
2407         skbdesc->desc = skb->data;
2408         skbdesc->desc_len = intf->beacon->queue->desc_size;
2409         skbdesc->entry = intf->beacon;
2410
2411         /*
2412          * mac80211 doesn't provide the control->queue variable
2413          * for beacons. Set our own queue identification so
2414          * it can be used during descriptor initialization.
2415          */
2416         control->queue = RT2X00_BCN_QUEUE_BEACON;
2417         rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
2418
2419         /*
2420          * Write entire beacon with descriptor to register,
2421          * and kick the beacon generator.
2422          */
2423         beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
2424         rt2x00pci_register_multiwrite(rt2x00dev, beacon_base,
2425                                       skb->data, skb->len);
2426         rt61pci_kick_tx_queue(rt2x00dev, control->queue);
2427
2428         return 0;
2429 }
2430
2431 static const struct ieee80211_ops rt61pci_mac80211_ops = {
2432         .tx                     = rt2x00mac_tx,
2433         .start                  = rt2x00mac_start,
2434         .stop                   = rt2x00mac_stop,
2435         .add_interface          = rt2x00mac_add_interface,
2436         .remove_interface       = rt2x00mac_remove_interface,
2437         .config                 = rt2x00mac_config,
2438         .config_interface       = rt2x00mac_config_interface,
2439         .configure_filter       = rt61pci_configure_filter,
2440         .get_stats              = rt2x00mac_get_stats,
2441         .set_retry_limit        = rt61pci_set_retry_limit,
2442         .bss_info_changed       = rt2x00mac_bss_info_changed,
2443         .conf_tx                = rt2x00mac_conf_tx,
2444         .get_tx_stats           = rt2x00mac_get_tx_stats,
2445         .get_tsf                = rt61pci_get_tsf,
2446         .reset_tsf              = rt61pci_reset_tsf,
2447         .beacon_update          = rt61pci_beacon_update,
2448 };
2449
2450 static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
2451         .irq_handler            = rt61pci_interrupt,
2452         .probe_hw               = rt61pci_probe_hw,
2453         .get_firmware_name      = rt61pci_get_firmware_name,
2454         .load_firmware          = rt61pci_load_firmware,
2455         .initialize             = rt2x00pci_initialize,
2456         .uninitialize           = rt2x00pci_uninitialize,
2457         .init_rxentry           = rt61pci_init_rxentry,
2458         .init_txentry           = rt61pci_init_txentry,
2459         .set_device_state       = rt61pci_set_device_state,
2460         .rfkill_poll            = rt61pci_rfkill_poll,
2461         .link_stats             = rt61pci_link_stats,
2462         .reset_tuner            = rt61pci_reset_tuner,
2463         .link_tuner             = rt61pci_link_tuner,
2464         .led_brightness         = rt61pci_led_brightness,
2465         .write_tx_desc          = rt61pci_write_tx_desc,
2466         .write_tx_data          = rt2x00pci_write_tx_data,
2467         .kick_tx_queue          = rt61pci_kick_tx_queue,
2468         .fill_rxdone            = rt61pci_fill_rxdone,
2469         .config_intf            = rt61pci_config_intf,
2470         .config_preamble        = rt61pci_config_preamble,
2471         .config                 = rt61pci_config,
2472 };
2473
2474 static const struct data_queue_desc rt61pci_queue_rx = {
2475         .entry_num              = RX_ENTRIES,
2476         .data_size              = DATA_FRAME_SIZE,
2477         .desc_size              = RXD_DESC_SIZE,
2478         .priv_size              = sizeof(struct queue_entry_priv_pci_rx),
2479 };
2480
2481 static const struct data_queue_desc rt61pci_queue_tx = {
2482         .entry_num              = TX_ENTRIES,
2483         .data_size              = DATA_FRAME_SIZE,
2484         .desc_size              = TXD_DESC_SIZE,
2485         .priv_size              = sizeof(struct queue_entry_priv_pci_tx),
2486 };
2487
2488 static const struct data_queue_desc rt61pci_queue_bcn = {
2489         .entry_num              = 4 * BEACON_ENTRIES,
2490         .data_size              = MGMT_FRAME_SIZE,
2491         .desc_size              = TXINFO_SIZE,
2492         .priv_size              = sizeof(struct queue_entry_priv_pci_tx),
2493 };
2494
2495 static const struct rt2x00_ops rt61pci_ops = {
2496         .name           = KBUILD_MODNAME,
2497         .max_sta_intf   = 1,
2498         .max_ap_intf    = 4,
2499         .eeprom_size    = EEPROM_SIZE,
2500         .rf_size        = RF_SIZE,
2501         .rx             = &rt61pci_queue_rx,
2502         .tx             = &rt61pci_queue_tx,
2503         .bcn            = &rt61pci_queue_bcn,
2504         .lib            = &rt61pci_rt2x00_ops,
2505         .hw             = &rt61pci_mac80211_ops,
2506 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
2507         .debugfs        = &rt61pci_rt2x00debug,
2508 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
2509 };
2510
2511 /*
2512  * RT61pci module information.
2513  */
2514 static struct pci_device_id rt61pci_device_table[] = {
2515         /* RT2561s */
2516         { PCI_DEVICE(0x1814, 0x0301), PCI_DEVICE_DATA(&rt61pci_ops) },
2517         /* RT2561 v2 */
2518         { PCI_DEVICE(0x1814, 0x0302), PCI_DEVICE_DATA(&rt61pci_ops) },
2519         /* RT2661 */
2520         { PCI_DEVICE(0x1814, 0x0401), PCI_DEVICE_DATA(&rt61pci_ops) },
2521         { 0, }
2522 };
2523
2524 MODULE_AUTHOR(DRV_PROJECT);
2525 MODULE_VERSION(DRV_VERSION);
2526 MODULE_DESCRIPTION("Ralink RT61 PCI & PCMCIA Wireless LAN driver.");
2527 MODULE_SUPPORTED_DEVICE("Ralink RT2561, RT2561s & RT2661 "
2528                         "PCI & PCMCIA chipset based cards");
2529 MODULE_DEVICE_TABLE(pci, rt61pci_device_table);
2530 MODULE_FIRMWARE(FIRMWARE_RT2561);
2531 MODULE_FIRMWARE(FIRMWARE_RT2561s);
2532 MODULE_FIRMWARE(FIRMWARE_RT2661);
2533 MODULE_LICENSE("GPL");
2534
2535 static struct pci_driver rt61pci_driver = {
2536         .name           = KBUILD_MODNAME,
2537         .id_table       = rt61pci_device_table,
2538         .probe          = rt2x00pci_probe,
2539         .remove         = __devexit_p(rt2x00pci_remove),
2540         .suspend        = rt2x00pci_suspend,
2541         .resume         = rt2x00pci_resume,
2542 };
2543
2544 static int __init rt61pci_init(void)
2545 {
2546         return pci_register_driver(&rt61pci_driver);
2547 }
2548
2549 static void __exit rt61pci_exit(void)
2550 {
2551         pci_unregister_driver(&rt61pci_driver);
2552 }
2553
2554 module_init(rt61pci_init);
2555 module_exit(rt61pci_exit);