]> err.no Git - linux-2.6/blob - drivers/net/wireless/rt2x00/rt2x00usb.c
rt2x00: Remove async vendor request calls from rt2x00usb
[linux-2.6] / drivers / net / wireless / rt2x00 / rt2x00usb.c
1 /*
2         Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
3         <http://rt2x00.serialmonkey.com>
4
5         This program is free software; you can redistribute it and/or modify
6         it under the terms of the GNU General Public License as published by
7         the Free Software Foundation; either version 2 of the License, or
8         (at your option) any later version.
9
10         This program is distributed in the hope that it will be useful,
11         but WITHOUT ANY WARRANTY; without even the implied warranty of
12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13         GNU General Public License for more details.
14
15         You should have received a copy of the GNU General Public License
16         along with this program; if not, write to the
17         Free Software Foundation, Inc.,
18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19  */
20
21 /*
22         Module: rt2x00usb
23         Abstract: rt2x00 generic usb device routines.
24  */
25
26 #include <linux/kernel.h>
27 #include <linux/module.h>
28 #include <linux/usb.h>
29 #include <linux/bug.h>
30
31 #include "rt2x00.h"
32 #include "rt2x00usb.h"
33
34 /*
35  * Interfacing with the HW.
36  */
37 int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev,
38                              const u8 request, const u8 requesttype,
39                              const u16 offset, const u16 value,
40                              void *buffer, const u16 buffer_length,
41                              const int timeout)
42 {
43         struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
44         int status;
45         unsigned int i;
46         unsigned int pipe =
47             (requesttype == USB_VENDOR_REQUEST_IN) ?
48             usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0);
49
50
51         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
52                 status = usb_control_msg(usb_dev, pipe, request, requesttype,
53                                          value, offset, buffer, buffer_length,
54                                          timeout);
55                 if (status >= 0)
56                         return 0;
57
58                 /*
59                  * Check for errors
60                  * -ENODEV: Device has disappeared, no point continuing.
61                  * All other errors: Try again.
62                  */
63                 else if (status == -ENODEV)
64                         break;
65         }
66
67         ERROR(rt2x00dev,
68               "Vendor Request 0x%02x failed for offset 0x%04x with error %d.\n",
69               request, offset, status);
70
71         return status;
72 }
73 EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request);
74
75 int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev,
76                                    const u8 request, const u8 requesttype,
77                                    const u16 offset, void *buffer,
78                                    const u16 buffer_length, const int timeout)
79 {
80         int status;
81
82         BUG_ON(!mutex_is_locked(&rt2x00dev->usb_cache_mutex));
83
84         /*
85          * Check for Cache availability.
86          */
87         if (unlikely(!rt2x00dev->csr.cache || buffer_length > CSR_CACHE_SIZE)) {
88                 ERROR(rt2x00dev, "CSR cache not available.\n");
89                 return -ENOMEM;
90         }
91
92         if (requesttype == USB_VENDOR_REQUEST_OUT)
93                 memcpy(rt2x00dev->csr.cache, buffer, buffer_length);
94
95         status = rt2x00usb_vendor_request(rt2x00dev, request, requesttype,
96                                           offset, 0, rt2x00dev->csr.cache,
97                                           buffer_length, timeout);
98
99         if (!status && requesttype == USB_VENDOR_REQUEST_IN)
100                 memcpy(buffer, rt2x00dev->csr.cache, buffer_length);
101
102         return status;
103 }
104 EXPORT_SYMBOL_GPL(rt2x00usb_vendor_req_buff_lock);
105
106 int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
107                                   const u8 request, const u8 requesttype,
108                                   const u16 offset, void *buffer,
109                                   const u16 buffer_length, const int timeout)
110 {
111         int status;
112
113         mutex_lock(&rt2x00dev->usb_cache_mutex);
114
115         status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request,
116                                                 requesttype, offset, buffer,
117                                                 buffer_length, timeout);
118
119         mutex_unlock(&rt2x00dev->usb_cache_mutex);
120
121         return status;
122 }
123 EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
124
125 /*
126  * TX data handlers.
127  */
128 static void rt2x00usb_interrupt_txdone(struct urb *urb)
129 {
130         struct queue_entry *entry = (struct queue_entry *)urb->context;
131         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
132         struct queue_entry_priv_usb_tx *priv_tx = entry->priv_data;
133         struct txdone_entry_desc txdesc;
134         __le32 *txd = (__le32 *)entry->skb->data;
135         u32 word;
136
137         if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
138             !__test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
139                 return;
140
141         rt2x00_desc_read(txd, 0, &word);
142
143         /*
144          * Remove the descriptor data from the buffer.
145          */
146         skb_pull(entry->skb, entry->queue->desc_size);
147
148         /*
149          * Obtain the status about this packet.
150          */
151         txdesc.status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY;
152         txdesc.retry = 0;
153         txdesc.control = &priv_tx->control;
154
155         rt2x00lib_txdone(entry, &txdesc);
156
157         /*
158          * Make this entry available for reuse.
159          */
160         entry->flags = 0;
161         rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
162
163         /*
164          * If the data queue was full before the txdone handler
165          * we must make sure the packet queue in the mac80211 stack
166          * is reenabled when the txdone handler has finished.
167          */
168         if (!rt2x00queue_full(entry->queue))
169                 ieee80211_wake_queue(rt2x00dev->hw, priv_tx->control.queue);
170 }
171
172 int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev,
173                             struct data_queue *queue, struct sk_buff *skb,
174                             struct ieee80211_tx_control *control)
175 {
176         struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
177         struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
178         struct queue_entry_priv_usb_tx *priv_tx = entry->priv_data;
179         struct skb_frame_desc *skbdesc;
180         u32 length;
181
182         if (rt2x00queue_full(queue))
183                 return -EINVAL;
184
185         if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) {
186                 ERROR(rt2x00dev,
187                       "Arrived at non-free entry in the non-full queue %d.\n"
188                       "Please file bug report to %s.\n",
189                       control->queue, DRV_PROJECT);
190                 return -EINVAL;
191         }
192
193         /*
194          * Add the descriptor in front of the skb.
195          */
196         skb_push(skb, queue->desc_size);
197         memset(skb->data, 0, queue->desc_size);
198
199         /*
200          * Fill in skb descriptor
201          */
202         skbdesc = get_skb_frame_desc(skb);
203         skbdesc->data = skb->data + queue->desc_size;
204         skbdesc->data_len = skb->len - queue->desc_size;
205         skbdesc->desc = skb->data;
206         skbdesc->desc_len = queue->desc_size;
207         skbdesc->entry = entry;
208
209         rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
210
211         /*
212          * USB devices cannot blindly pass the skb->len as the
213          * length of the data to usb_fill_bulk_urb. Pass the skb
214          * to the driver to determine what the length should be.
215          */
216         length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, skb);
217
218         /*
219          * Initialize URB and send the frame to the device.
220          */
221         __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
222         usb_fill_bulk_urb(priv_tx->urb, usb_dev, usb_sndbulkpipe(usb_dev, 1),
223                           skb->data, length, rt2x00usb_interrupt_txdone, entry);
224         usb_submit_urb(priv_tx->urb, GFP_ATOMIC);
225
226         rt2x00queue_index_inc(queue, Q_INDEX);
227
228         return 0;
229 }
230 EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data);
231
232 /*
233  * RX data handlers.
234  */
235 static struct sk_buff* rt2x00usb_alloc_rxskb(struct data_queue *queue)
236 {
237         struct sk_buff *skb;
238         unsigned int frame_size;
239
240         /*
241          * As alignment we use 2 and not NET_IP_ALIGN because we need
242          * to be sure we have 2 bytes room in the head. (NET_IP_ALIGN
243          * can be 0 on some hardware). We use these 2 bytes for frame
244          * alignment later, we assume that the chance that
245          * header_size % 4 == 2 is bigger then header_size % 2 == 0
246          * and thus optimize alignment by reserving the 2 bytes in
247          * advance.
248          */
249         frame_size = queue->data_size + queue->desc_size;
250         skb = dev_alloc_skb(frame_size + 2);
251         if (!skb)
252                 return NULL;
253
254         skb_reserve(skb, 2);
255         skb_put(skb, frame_size);
256
257         return skb;
258 }
259
260 static void rt2x00usb_interrupt_rxdone(struct urb *urb)
261 {
262         struct queue_entry *entry = (struct queue_entry *)urb->context;
263         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
264         struct sk_buff *skb;
265         struct skb_frame_desc *skbdesc;
266         struct rxdone_entry_desc rxdesc;
267
268         if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
269             !test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
270                 return;
271
272         /*
273          * Check if the received data is simply too small
274          * to be actually valid, or if the urb is signaling
275          * a problem.
276          */
277         if (urb->actual_length < entry->queue->desc_size || urb->status)
278                 goto skip_entry;
279
280         /*
281          * Fill in skb descriptor
282          */
283         skbdesc = get_skb_frame_desc(entry->skb);
284         memset(skbdesc, 0, sizeof(*skbdesc));
285         skbdesc->entry = entry;
286
287         memset(&rxdesc, 0, sizeof(rxdesc));
288         rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
289
290         /*
291          * Allocate a new sk buffer to replace the current one.
292          * If allocation fails, we should drop the current frame
293          * so we can recycle the existing sk buffer for the new frame.
294          */
295         skb = rt2x00usb_alloc_rxskb(entry->queue);
296         if (!skb)
297                 goto skip_entry;
298
299         /*
300          * Send the frame to rt2x00lib for further processing.
301          */
302         rt2x00lib_rxdone(entry, &rxdesc);
303
304         /*
305          * Replace current entry's skb with the newly allocated one,
306          * and reinitialize the urb.
307          */
308         entry->skb = skb;
309         urb->transfer_buffer = entry->skb->data;
310         urb->transfer_buffer_length = entry->skb->len;
311
312 skip_entry:
313         if (test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags)) {
314                 __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
315                 usb_submit_urb(urb, GFP_ATOMIC);
316         }
317
318         rt2x00queue_index_inc(entry->queue, Q_INDEX);
319 }
320
321 /*
322  * Radio handlers
323  */
324 void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
325 {
326         struct queue_entry_priv_usb_rx *priv_rx;
327         struct queue_entry_priv_usb_tx *priv_tx;
328         struct queue_entry_priv_usb_bcn *priv_bcn;
329         struct data_queue *queue;
330         unsigned int i;
331
332         rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0x0000, 0x0000,
333                                     REGISTER_TIMEOUT);
334
335         /*
336          * Cancel all queues.
337          */
338         for (i = 0; i < rt2x00dev->rx->limit; i++) {
339                 priv_rx = rt2x00dev->rx->entries[i].priv_data;
340                 usb_kill_urb(priv_rx->urb);
341         }
342
343         tx_queue_for_each(rt2x00dev, queue) {
344                 for (i = 0; i < queue->limit; i++) {
345                         priv_tx = queue->entries[i].priv_data;
346                         usb_kill_urb(priv_tx->urb);
347                 }
348         }
349
350         for (i = 0; i < rt2x00dev->bcn->limit; i++) {
351                 priv_bcn = rt2x00dev->bcn->entries[i].priv_data;
352                 usb_kill_urb(priv_bcn->urb);
353
354                 if (priv_bcn->guardian_urb)
355                         usb_kill_urb(priv_bcn->guardian_urb);
356         }
357
358         if (!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags))
359                 return;
360
361         for (i = 0; i < rt2x00dev->bcn[1].limit; i++) {
362                 priv_tx = rt2x00dev->bcn[1].entries[i].priv_data;
363                 usb_kill_urb(priv_tx->urb);
364         }
365 }
366 EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
367
368 /*
369  * Device initialization handlers.
370  */
371 void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev,
372                             struct queue_entry *entry)
373 {
374         struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
375         struct queue_entry_priv_usb_rx *priv_rx = entry->priv_data;
376
377         usb_fill_bulk_urb(priv_rx->urb, usb_dev,
378                           usb_rcvbulkpipe(usb_dev, 1),
379                           entry->skb->data, entry->skb->len,
380                           rt2x00usb_interrupt_rxdone, entry);
381
382         __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
383         usb_submit_urb(priv_rx->urb, GFP_ATOMIC);
384 }
385 EXPORT_SYMBOL_GPL(rt2x00usb_init_rxentry);
386
387 void rt2x00usb_init_txentry(struct rt2x00_dev *rt2x00dev,
388                             struct queue_entry *entry)
389 {
390         entry->flags = 0;
391 }
392 EXPORT_SYMBOL_GPL(rt2x00usb_init_txentry);
393
394 static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev,
395                                struct data_queue *queue)
396 {
397         struct queue_entry_priv_usb_rx *priv_rx;
398         struct queue_entry_priv_usb_tx *priv_tx;
399         struct queue_entry_priv_usb_bcn *priv_bcn;
400         struct urb *urb;
401         unsigned int guardian =
402             test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
403         unsigned int i;
404
405         /*
406          * Allocate the URB's
407          */
408         for (i = 0; i < queue->limit; i++) {
409                 urb = usb_alloc_urb(0, GFP_KERNEL);
410                 if (!urb)
411                         return -ENOMEM;
412
413                 if (queue->qid == QID_RX) {
414                         priv_rx = queue->entries[i].priv_data;
415                         priv_rx->urb = urb;
416                 } else if (queue->qid == QID_MGMT && guardian) {
417                         priv_bcn = queue->entries[i].priv_data;
418                         priv_bcn->urb = urb;
419
420                         urb = usb_alloc_urb(0, GFP_KERNEL);
421                         if (!urb)
422                                 return -ENOMEM;
423
424                         priv_bcn->guardian_urb = urb;
425                 } else {
426                         priv_tx = queue->entries[i].priv_data;
427                         priv_tx->urb = urb;
428                 }
429         }
430
431         return 0;
432 }
433
434 static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev,
435                                struct data_queue *queue)
436 {
437         struct queue_entry_priv_usb_rx *priv_rx;
438         struct queue_entry_priv_usb_tx *priv_tx;
439         struct queue_entry_priv_usb_bcn *priv_bcn;
440         struct urb *urb;
441         unsigned int guardian =
442             test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
443         unsigned int i;
444
445         if (!queue->entries)
446                 return;
447
448         for (i = 0; i < queue->limit; i++) {
449                 if (queue->qid == QID_RX) {
450                         priv_rx = queue->entries[i].priv_data;
451                         urb = priv_rx->urb;
452                 } else if (queue->qid == QID_MGMT && guardian) {
453                         priv_bcn = queue->entries[i].priv_data;
454
455                         usb_kill_urb(priv_bcn->guardian_urb);
456                         usb_free_urb(priv_bcn->guardian_urb);
457
458                         urb = priv_bcn->urb;
459                 } else {
460                         priv_tx = queue->entries[i].priv_data;
461                         urb = priv_tx->urb;
462                 }
463
464                 usb_kill_urb(urb);
465                 usb_free_urb(urb);
466                 if (queue->entries[i].skb)
467                         kfree_skb(queue->entries[i].skb);
468         }
469 }
470
471 int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev)
472 {
473         struct data_queue *queue;
474         struct sk_buff *skb;
475         unsigned int entry_size;
476         unsigned int i;
477         int uninitialized_var(status);
478
479         /*
480          * Allocate DMA
481          */
482         queue_for_each(rt2x00dev, queue) {
483                 status = rt2x00usb_alloc_urb(rt2x00dev, queue);
484                 if (status)
485                         goto exit;
486         }
487
488         /*
489          * For the RX queue, skb's should be allocated.
490          */
491         entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size;
492         for (i = 0; i < rt2x00dev->rx->limit; i++) {
493                 skb = rt2x00usb_alloc_rxskb(rt2x00dev->rx);
494                 if (!skb)
495                         goto exit;
496
497                 rt2x00dev->rx->entries[i].skb = skb;
498         }
499
500         return 0;
501
502 exit:
503         rt2x00usb_uninitialize(rt2x00dev);
504
505         return status;
506 }
507 EXPORT_SYMBOL_GPL(rt2x00usb_initialize);
508
509 void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev)
510 {
511         struct data_queue *queue;
512
513         queue_for_each(rt2x00dev, queue)
514                 rt2x00usb_free_urb(rt2x00dev, queue);
515 }
516 EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize);
517
518 /*
519  * USB driver handlers.
520  */
521 static void rt2x00usb_free_reg(struct rt2x00_dev *rt2x00dev)
522 {
523         kfree(rt2x00dev->rf);
524         rt2x00dev->rf = NULL;
525
526         kfree(rt2x00dev->eeprom);
527         rt2x00dev->eeprom = NULL;
528
529         kfree(rt2x00dev->csr.cache);
530         rt2x00dev->csr.cache = NULL;
531 }
532
533 static int rt2x00usb_alloc_reg(struct rt2x00_dev *rt2x00dev)
534 {
535         rt2x00dev->csr.cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL);
536         if (!rt2x00dev->csr.cache)
537                 goto exit;
538
539         rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
540         if (!rt2x00dev->eeprom)
541                 goto exit;
542
543         rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
544         if (!rt2x00dev->rf)
545                 goto exit;
546
547         return 0;
548
549 exit:
550         ERROR_PROBE("Failed to allocate registers.\n");
551
552         rt2x00usb_free_reg(rt2x00dev);
553
554         return -ENOMEM;
555 }
556
557 int rt2x00usb_probe(struct usb_interface *usb_intf,
558                     const struct usb_device_id *id)
559 {
560         struct usb_device *usb_dev = interface_to_usbdev(usb_intf);
561         struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_info;
562         struct ieee80211_hw *hw;
563         struct rt2x00_dev *rt2x00dev;
564         int retval;
565
566         usb_dev = usb_get_dev(usb_dev);
567
568         hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
569         if (!hw) {
570                 ERROR_PROBE("Failed to allocate hardware.\n");
571                 retval = -ENOMEM;
572                 goto exit_put_device;
573         }
574
575         usb_set_intfdata(usb_intf, hw);
576
577         rt2x00dev = hw->priv;
578         rt2x00dev->dev = usb_intf;
579         rt2x00dev->ops = ops;
580         rt2x00dev->hw = hw;
581         mutex_init(&rt2x00dev->usb_cache_mutex);
582
583         rt2x00dev->usb_maxpacket =
584             usb_maxpacket(usb_dev, usb_sndbulkpipe(usb_dev, 1), 1);
585         if (!rt2x00dev->usb_maxpacket)
586                 rt2x00dev->usb_maxpacket = 1;
587
588         retval = rt2x00usb_alloc_reg(rt2x00dev);
589         if (retval)
590                 goto exit_free_device;
591
592         retval = rt2x00lib_probe_dev(rt2x00dev);
593         if (retval)
594                 goto exit_free_reg;
595
596         return 0;
597
598 exit_free_reg:
599         rt2x00usb_free_reg(rt2x00dev);
600
601 exit_free_device:
602         ieee80211_free_hw(hw);
603
604 exit_put_device:
605         usb_put_dev(usb_dev);
606
607         usb_set_intfdata(usb_intf, NULL);
608
609         return retval;
610 }
611 EXPORT_SYMBOL_GPL(rt2x00usb_probe);
612
613 void rt2x00usb_disconnect(struct usb_interface *usb_intf)
614 {
615         struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
616         struct rt2x00_dev *rt2x00dev = hw->priv;
617
618         /*
619          * Free all allocated data.
620          */
621         rt2x00lib_remove_dev(rt2x00dev);
622         rt2x00usb_free_reg(rt2x00dev);
623         ieee80211_free_hw(hw);
624
625         /*
626          * Free the USB device data.
627          */
628         usb_set_intfdata(usb_intf, NULL);
629         usb_put_dev(interface_to_usbdev(usb_intf));
630 }
631 EXPORT_SYMBOL_GPL(rt2x00usb_disconnect);
632
633 #ifdef CONFIG_PM
634 int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state)
635 {
636         struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
637         struct rt2x00_dev *rt2x00dev = hw->priv;
638         int retval;
639
640         retval = rt2x00lib_suspend(rt2x00dev, state);
641         if (retval)
642                 return retval;
643
644         rt2x00usb_free_reg(rt2x00dev);
645
646         /*
647          * Decrease usbdev refcount.
648          */
649         usb_put_dev(interface_to_usbdev(usb_intf));
650
651         return 0;
652 }
653 EXPORT_SYMBOL_GPL(rt2x00usb_suspend);
654
655 int rt2x00usb_resume(struct usb_interface *usb_intf)
656 {
657         struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
658         struct rt2x00_dev *rt2x00dev = hw->priv;
659         int retval;
660
661         usb_get_dev(interface_to_usbdev(usb_intf));
662
663         retval = rt2x00usb_alloc_reg(rt2x00dev);
664         if (retval)
665                 return retval;
666
667         retval = rt2x00lib_resume(rt2x00dev);
668         if (retval)
669                 goto exit_free_reg;
670
671         return 0;
672
673 exit_free_reg:
674         rt2x00usb_free_reg(rt2x00dev);
675
676         return retval;
677 }
678 EXPORT_SYMBOL_GPL(rt2x00usb_resume);
679 #endif /* CONFIG_PM */
680
681 /*
682  * rt2x00usb module information.
683  */
684 MODULE_AUTHOR(DRV_PROJECT);
685 MODULE_VERSION(DRV_VERSION);
686 MODULE_DESCRIPTION("rt2x00 usb library");
687 MODULE_LICENSE("GPL");