2 Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 Abstract: rt2x00 generic device routines.
26 #include <linux/kernel.h>
27 #include <linux/module.h>
30 #include "rt2x00lib.h"
31 #include "rt2x00dump.h"
34 * Link tuning handlers
36 void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev)
38 if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
42 * Reset link information.
43 * Both the currently active vgc level as well as
44 * the link tuner counter should be reset. Resetting
45 * the counter is important for devices where the
46 * device should only perform link tuning during the
47 * first minute after being enabled.
49 rt2x00dev->link.count = 0;
50 rt2x00dev->link.vgc_level = 0;
53 * Reset the link tuner.
55 rt2x00dev->ops->lib->reset_tuner(rt2x00dev);
58 static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
61 * Clear all (possibly) pre-existing quality statistics.
63 memset(&rt2x00dev->link.qual, 0, sizeof(rt2x00dev->link.qual));
66 * The RX and TX percentage should start at 50%
67 * this will assure we will get at least get some
68 * decent value when the link tuner starts.
69 * The value will be dropped and overwritten with
70 * the correct (measured )value anyway during the
71 * first run of the link tuner.
73 rt2x00dev->link.qual.rx_percentage = 50;
74 rt2x00dev->link.qual.tx_percentage = 50;
76 rt2x00lib_reset_link_tuner(rt2x00dev);
78 queue_delayed_work(rt2x00dev->hw->workqueue,
79 &rt2x00dev->link.work, LINK_TUNE_INTERVAL);
82 static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev)
84 cancel_delayed_work_sync(&rt2x00dev->link.work);
88 * Radio control handlers.
90 int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
95 * Don't enable the radio twice.
96 * And check if the hardware button has been disabled.
98 if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
99 test_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags))
103 * Initialize all data queues.
105 rt2x00queue_init_rx(rt2x00dev);
106 rt2x00queue_init_tx(rt2x00dev);
111 status = rt2x00dev->ops->lib->set_device_state(rt2x00dev,
116 __set_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags);
121 rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
124 * Start the TX queues.
126 ieee80211_start_queues(rt2x00dev->hw);
131 void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
133 if (!__test_and_clear_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
137 * Stop all scheduled work.
139 if (work_pending(&rt2x00dev->intf_work))
140 cancel_work_sync(&rt2x00dev->intf_work);
141 if (work_pending(&rt2x00dev->filter_work))
142 cancel_work_sync(&rt2x00dev->filter_work);
145 * Stop the TX queues.
147 ieee80211_stop_queues(rt2x00dev->hw);
152 rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
157 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF);
160 void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state)
163 * When we are disabling the RX, we should also stop the link tuner.
165 if (state == STATE_RADIO_RX_OFF)
166 rt2x00lib_stop_link_tuner(rt2x00dev);
168 rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
171 * When we are enabling the RX, we should also start the link tuner.
173 if (state == STATE_RADIO_RX_ON &&
174 (rt2x00dev->intf_ap_count || rt2x00dev->intf_sta_count))
175 rt2x00lib_start_link_tuner(rt2x00dev);
178 static void rt2x00lib_evaluate_antenna_sample(struct rt2x00_dev *rt2x00dev)
180 enum antenna rx = rt2x00dev->link.ant.active.rx;
181 enum antenna tx = rt2x00dev->link.ant.active.tx;
183 rt2x00_get_link_ant_rssi_history(&rt2x00dev->link, ANTENNA_A);
185 rt2x00_get_link_ant_rssi_history(&rt2x00dev->link, ANTENNA_B);
188 * We are done sampling. Now we should evaluate the results.
190 rt2x00dev->link.ant.flags &= ~ANTENNA_MODE_SAMPLE;
193 * During the last period we have sampled the RSSI
194 * from both antenna's. It now is time to determine
195 * which antenna demonstrated the best performance.
196 * When we are already on the antenna with the best
197 * performance, then there really is nothing for us
200 if (sample_a == sample_b)
203 if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY)
204 rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B;
206 if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)
207 tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B;
209 rt2x00lib_config_antenna(rt2x00dev, rx, tx);
212 static void rt2x00lib_evaluate_antenna_eval(struct rt2x00_dev *rt2x00dev)
214 enum antenna rx = rt2x00dev->link.ant.active.rx;
215 enum antenna tx = rt2x00dev->link.ant.active.tx;
216 int rssi_curr = rt2x00_get_link_ant_rssi(&rt2x00dev->link);
217 int rssi_old = rt2x00_update_ant_rssi(&rt2x00dev->link, rssi_curr);
220 * Legacy driver indicates that we should swap antenna's
221 * when the difference in RSSI is greater that 5. This
222 * also should be done when the RSSI was actually better
223 * then the previous sample.
224 * When the difference exceeds the threshold we should
225 * sample the rssi from the other antenna to make a valid
226 * comparison between the 2 antennas.
228 if (abs(rssi_curr - rssi_old) < 5)
231 rt2x00dev->link.ant.flags |= ANTENNA_MODE_SAMPLE;
233 if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY)
234 rx = (rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A;
236 if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)
237 tx = (tx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A;
239 rt2x00lib_config_antenna(rt2x00dev, rx, tx);
242 static void rt2x00lib_evaluate_antenna(struct rt2x00_dev *rt2x00dev)
245 * Determine if software diversity is enabled for
246 * either the TX or RX antenna (or both).
247 * Always perform this check since within the link
248 * tuner interval the configuration might have changed.
250 rt2x00dev->link.ant.flags &= ~ANTENNA_RX_DIVERSITY;
251 rt2x00dev->link.ant.flags &= ~ANTENNA_TX_DIVERSITY;
253 if (rt2x00dev->hw->conf.antenna_sel_rx == 0 &&
254 rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
255 rt2x00dev->link.ant.flags |= ANTENNA_RX_DIVERSITY;
256 if (rt2x00dev->hw->conf.antenna_sel_tx == 0 &&
257 rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
258 rt2x00dev->link.ant.flags |= ANTENNA_TX_DIVERSITY;
260 if (!(rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) &&
261 !(rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)) {
262 rt2x00dev->link.ant.flags = 0;
267 * If we have only sampled the data over the last period
268 * we should now harvest the data. Otherwise just evaluate
269 * the data. The latter should only be performed once
272 if (rt2x00dev->link.ant.flags & ANTENNA_MODE_SAMPLE)
273 rt2x00lib_evaluate_antenna_sample(rt2x00dev);
274 else if (rt2x00dev->link.count & 1)
275 rt2x00lib_evaluate_antenna_eval(rt2x00dev);
278 static void rt2x00lib_update_link_stats(struct link *link, int rssi)
285 if (link->qual.avg_rssi)
286 avg_rssi = MOVING_AVERAGE(link->qual.avg_rssi, rssi, 8);
287 link->qual.avg_rssi = avg_rssi;
290 * Update antenna RSSI
292 if (link->ant.rssi_ant)
293 rssi = MOVING_AVERAGE(link->ant.rssi_ant, rssi, 8);
294 link->ant.rssi_ant = rssi;
297 static void rt2x00lib_precalculate_link_signal(struct link_qual *qual)
299 if (qual->rx_failed || qual->rx_success)
300 qual->rx_percentage =
301 (qual->rx_success * 100) /
302 (qual->rx_failed + qual->rx_success);
304 qual->rx_percentage = 50;
306 if (qual->tx_failed || qual->tx_success)
307 qual->tx_percentage =
308 (qual->tx_success * 100) /
309 (qual->tx_failed + qual->tx_success);
311 qual->tx_percentage = 50;
313 qual->rx_success = 0;
315 qual->tx_success = 0;
319 static int rt2x00lib_calculate_link_signal(struct rt2x00_dev *rt2x00dev,
322 int rssi_percentage = 0;
326 * We need a positive value for the RSSI.
329 rssi += rt2x00dev->rssi_offset;
332 * Calculate the different percentages,
333 * which will be used for the signal.
335 if (rt2x00dev->rssi_offset)
336 rssi_percentage = (rssi * 100) / rt2x00dev->rssi_offset;
339 * Add the individual percentages and use the WEIGHT
340 * defines to calculate the current link signal.
342 signal = ((WEIGHT_RSSI * rssi_percentage) +
343 (WEIGHT_TX * rt2x00dev->link.qual.tx_percentage) +
344 (WEIGHT_RX * rt2x00dev->link.qual.rx_percentage)) / 100;
346 return (signal > 100) ? 100 : signal;
349 static void rt2x00lib_link_tuner(struct work_struct *work)
351 struct rt2x00_dev *rt2x00dev =
352 container_of(work, struct rt2x00_dev, link.work.work);
355 * When the radio is shutting down we should
356 * immediately cease all link tuning.
358 if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
364 rt2x00dev->ops->lib->link_stats(rt2x00dev, &rt2x00dev->link.qual);
365 rt2x00dev->low_level_stats.dot11FCSErrorCount +=
366 rt2x00dev->link.qual.rx_failed;
369 * Only perform the link tuning when Link tuning
370 * has been enabled (This could have been disabled from the EEPROM).
372 if (!test_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags))
373 rt2x00dev->ops->lib->link_tuner(rt2x00dev);
376 * Precalculate a portion of the link signal which is
377 * in based on the tx/rx success/failure counters.
379 rt2x00lib_precalculate_link_signal(&rt2x00dev->link.qual);
382 * Evaluate antenna setup, make this the last step since this could
383 * possibly reset some statistics.
385 rt2x00lib_evaluate_antenna(rt2x00dev);
388 * Increase tuner counter, and reschedule the next link tuner run.
390 rt2x00dev->link.count++;
391 queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work,
395 static void rt2x00lib_packetfilter_scheduled(struct work_struct *work)
397 struct rt2x00_dev *rt2x00dev =
398 container_of(work, struct rt2x00_dev, filter_work);
399 unsigned int filter = rt2x00dev->packet_filter;
402 * Since we had stored the filter inside rt2x00dev->packet_filter,
403 * we should now clear that field. Otherwise the driver will
404 * assume nothing has changed (*total_flags will be compared
405 * to rt2x00dev->packet_filter to determine if any action is required).
407 rt2x00dev->packet_filter = 0;
409 rt2x00dev->ops->hw->configure_filter(rt2x00dev->hw,
410 filter, &filter, 0, NULL);
413 static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
414 struct ieee80211_vif *vif)
416 struct rt2x00_dev *rt2x00dev = data;
417 struct rt2x00_intf *intf = vif_to_intf(vif);
419 struct ieee80211_tx_control control;
420 struct ieee80211_bss_conf conf;
424 * Copy all data we need during this action under the protection
425 * of a spinlock. Otherwise race conditions might occur which results
426 * into an invalid configuration.
428 spin_lock(&intf->lock);
430 memcpy(&conf, &intf->conf, sizeof(conf));
431 delayed_flags = intf->delayed_flags;
432 intf->delayed_flags = 0;
434 spin_unlock(&intf->lock);
436 if (delayed_flags & DELAYED_UPDATE_BEACON) {
437 skb = ieee80211_beacon_get(rt2x00dev->hw, vif, &control);
439 rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, skb,
445 if (delayed_flags & DELAYED_CONFIG_PREAMBLE)
446 rt2x00lib_config_preamble(rt2x00dev, intf,
447 intf->conf.use_short_preamble);
450 static void rt2x00lib_intf_scheduled(struct work_struct *work)
452 struct rt2x00_dev *rt2x00dev =
453 container_of(work, struct rt2x00_dev, intf_work);
456 * Iterate over each interface and perform the
457 * requested configurations.
459 ieee80211_iterate_active_interfaces(rt2x00dev->hw,
460 rt2x00lib_intf_scheduled_iter,
465 * Interrupt context handlers.
467 static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
468 struct ieee80211_vif *vif)
470 struct rt2x00_intf *intf = vif_to_intf(vif);
472 if (vif->type != IEEE80211_IF_TYPE_AP &&
473 vif->type != IEEE80211_IF_TYPE_IBSS)
476 spin_lock(&intf->lock);
477 intf->delayed_flags |= DELAYED_UPDATE_BEACON;
478 spin_unlock(&intf->lock);
481 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
483 if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
486 ieee80211_iterate_active_interfaces(rt2x00dev->hw,
487 rt2x00lib_beacondone_iter,
490 queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work);
492 EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
494 void rt2x00lib_txdone(struct queue_entry *entry,
495 struct txdone_entry_desc *txdesc)
497 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
498 struct ieee80211_tx_status tx_status;
499 int success = !!(txdesc->status == TX_SUCCESS ||
500 txdesc->status == TX_SUCCESS_RETRY);
501 int fail = !!(txdesc->status == TX_FAIL_RETRY ||
502 txdesc->status == TX_FAIL_INVALID ||
503 txdesc->status == TX_FAIL_OTHER);
506 * Update TX statistics.
508 rt2x00dev->link.qual.tx_success += success;
509 rt2x00dev->link.qual.tx_failed += txdesc->retry + fail;
512 * Initialize TX status
515 tx_status.ack_signal = 0;
516 tx_status.excessive_retries = (txdesc->status == TX_FAIL_RETRY);
517 tx_status.retry_count = txdesc->retry;
518 memcpy(&tx_status.control, txdesc->control, sizeof(txdesc->control));
520 if (!(tx_status.control.flags & IEEE80211_TXCTL_NO_ACK)) {
522 tx_status.flags |= IEEE80211_TX_STATUS_ACK;
524 rt2x00dev->low_level_stats.dot11ACKFailureCount++;
527 tx_status.queue_length = entry->queue->limit;
528 tx_status.queue_number = tx_status.control.queue;
530 if (tx_status.control.flags & IEEE80211_TXCTL_USE_RTS_CTS) {
532 rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
534 rt2x00dev->low_level_stats.dot11RTSFailureCount++;
538 * Send the tx_status to mac80211 & debugfs.
539 * mac80211 will clean up the skb structure.
541 get_skb_frame_desc(entry->skb)->frame_type = DUMP_FRAME_TXDONE;
542 rt2x00debug_dump_frame(rt2x00dev, entry->skb);
543 ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb, &tx_status);
546 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
548 void rt2x00lib_rxdone(struct queue_entry *entry,
549 struct rxdone_entry_desc *rxdesc)
551 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
552 struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
553 struct ieee80211_hw_mode *mode;
554 struct ieee80211_rate *rate;
555 struct ieee80211_hdr *hdr;
561 * Update RX statistics.
563 mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode];
564 for (i = 0; i < mode->num_rates; i++) {
565 rate = &mode->rates[i];
568 * When frame was received with an OFDM bitrate,
569 * the signal is the PLCP value. If it was received with
570 * a CCK bitrate the signal is the rate in 0.5kbit/s.
573 val = DEVICE_GET_RATE_FIELD(rate->val, RATE);
575 val = DEVICE_GET_RATE_FIELD(rate->val, PLCP);
577 if (val == rxdesc->signal) {
584 * Only update link status if this is a beacon frame carrying our bssid.
586 hdr = (struct ieee80211_hdr*)entry->skb->data;
587 fc = le16_to_cpu(hdr->frame_control);
588 if (is_beacon(fc) && rxdesc->my_bss)
589 rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc->rssi);
591 rt2x00dev->link.qual.rx_success++;
593 rx_status->rate = val;
595 rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc->rssi);
596 rx_status->ssi = rxdesc->rssi;
597 rx_status->flag = rxdesc->flags;
598 rx_status->antenna = rt2x00dev->link.ant.active.rx;
601 * Send frame to mac80211 & debugfs.
602 * mac80211 will clean up the skb structure.
604 get_skb_frame_desc(entry->skb)->frame_type = DUMP_FRAME_RXDONE;
605 rt2x00debug_dump_frame(rt2x00dev, entry->skb);
606 ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb, rx_status);
609 EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
612 * TX descriptor initializer
614 void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev,
616 struct ieee80211_tx_control *control)
618 struct txentry_desc txdesc;
619 struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
620 struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
629 memset(&txdesc, 0, sizeof(txdesc));
631 txdesc.queue = skbdesc->entry->queue->qid;
632 txdesc.cw_min = skbdesc->entry->queue->cw_min;
633 txdesc.cw_max = skbdesc->entry->queue->cw_max;
634 txdesc.aifs = skbdesc->entry->queue->aifs;
637 * Read required fields from ieee80211 header.
639 frame_control = le16_to_cpu(ieee80211hdr->frame_control);
640 seq_ctrl = le16_to_cpu(ieee80211hdr->seq_ctrl);
642 tx_rate = control->tx_rate;
645 * Check whether this frame is to be acked
647 if (!(control->flags & IEEE80211_TXCTL_NO_ACK))
648 __set_bit(ENTRY_TXD_ACK, &txdesc.flags);
651 * Check if this is a RTS/CTS frame
653 if (is_rts_frame(frame_control) || is_cts_frame(frame_control)) {
654 __set_bit(ENTRY_TXD_BURST, &txdesc.flags);
655 if (is_rts_frame(frame_control)) {
656 __set_bit(ENTRY_TXD_RTS_FRAME, &txdesc.flags);
657 __set_bit(ENTRY_TXD_ACK, &txdesc.flags);
659 __clear_bit(ENTRY_TXD_ACK, &txdesc.flags);
660 if (control->rts_cts_rate)
661 tx_rate = control->rts_cts_rate;
667 if (DEVICE_GET_RATE_FIELD(tx_rate, RATEMASK) & DEV_OFDM_RATEMASK)
668 __set_bit(ENTRY_TXD_OFDM_RATE, &txdesc.flags);
671 * Check if more fragments are pending
673 if (ieee80211_get_morefrag(ieee80211hdr)) {
674 __set_bit(ENTRY_TXD_BURST, &txdesc.flags);
675 __set_bit(ENTRY_TXD_MORE_FRAG, &txdesc.flags);
679 * Beacons and probe responses require the tsf timestamp
680 * to be inserted into the frame.
682 if (control->queue == RT2X00_BCN_QUEUE_BEACON ||
683 is_probe_resp(frame_control))
684 __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc.flags);
687 * Determine with what IFS priority this frame should be send.
688 * Set ifs to IFS_SIFS when the this is not the first fragment,
689 * or this fragment came after RTS/CTS.
691 if ((seq_ctrl & IEEE80211_SCTL_FRAG) > 0 ||
692 test_bit(ENTRY_TXD_RTS_FRAME, &txdesc.flags))
693 txdesc.ifs = IFS_SIFS;
695 txdesc.ifs = IFS_BACKOFF;
699 * Length calculation depends on OFDM/CCK rate.
701 txdesc.signal = DEVICE_GET_RATE_FIELD(tx_rate, PLCP);
702 txdesc.service = 0x04;
704 length = skb->len + FCS_LEN;
705 if (test_bit(ENTRY_TXD_OFDM_RATE, &txdesc.flags)) {
706 txdesc.length_high = (length >> 6) & 0x3f;
707 txdesc.length_low = length & 0x3f;
709 bitrate = DEVICE_GET_RATE_FIELD(tx_rate, RATE);
712 * Convert length to microseconds.
714 residual = get_duration_res(length, bitrate);
715 duration = get_duration(length, bitrate);
721 * Check if we need to set the Length Extension
723 if (bitrate == 110 && residual <= 30)
724 txdesc.service |= 0x80;
727 txdesc.length_high = (duration >> 8) & 0xff;
728 txdesc.length_low = duration & 0xff;
731 * When preamble is enabled we should set the
732 * preamble bit for the signal.
734 if (DEVICE_GET_RATE_FIELD(tx_rate, PREAMBLE))
735 txdesc.signal |= 0x08;
738 rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, skb, &txdesc, control);
741 * Update queue entry.
743 skbdesc->entry->skb = skb;
746 * The frame has been completely initialized and ready
747 * for sending to the device. The caller will push the
748 * frame to the device, but we are going to push the
749 * frame to debugfs here.
751 skbdesc->frame_type = DUMP_FRAME_TX;
752 rt2x00debug_dump_frame(rt2x00dev, skb);
754 EXPORT_SYMBOL_GPL(rt2x00lib_write_tx_desc);
757 * Driver initialization handlers.
759 static void rt2x00lib_channel(struct ieee80211_channel *entry,
760 const int channel, const int tx_power,
763 entry->chan = channel;
765 entry->freq = 2407 + (5 * channel);
767 entry->freq = 5000 + (5 * channel);
770 IEEE80211_CHAN_W_IBSS |
771 IEEE80211_CHAN_W_ACTIVE_SCAN |
772 IEEE80211_CHAN_W_SCAN;
773 entry->power_level = tx_power;
774 entry->antenna_max = 0xff;
777 static void rt2x00lib_rate(struct ieee80211_rate *entry,
778 const int rate, const int mask,
779 const int plcp, const int flags)
783 DEVICE_SET_RATE_FIELD(rate, RATE) |
784 DEVICE_SET_RATE_FIELD(mask, RATEMASK) |
785 DEVICE_SET_RATE_FIELD(plcp, PLCP);
786 entry->flags = flags;
787 entry->val2 = entry->val;
788 if (entry->flags & IEEE80211_RATE_PREAMBLE2)
789 entry->val2 |= DEVICE_SET_RATE_FIELD(1, PREAMBLE);
790 entry->min_rssi_ack = 0;
791 entry->min_rssi_ack_delta = 0;
794 static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
795 struct hw_mode_spec *spec)
797 struct ieee80211_hw *hw = rt2x00dev->hw;
798 struct ieee80211_hw_mode *hwmodes;
799 struct ieee80211_channel *channels;
800 struct ieee80211_rate *rates;
802 unsigned char tx_power;
804 hwmodes = kzalloc(sizeof(*hwmodes) * spec->num_modes, GFP_KERNEL);
808 channels = kzalloc(sizeof(*channels) * spec->num_channels, GFP_KERNEL);
810 goto exit_free_modes;
812 rates = kzalloc(sizeof(*rates) * spec->num_rates, GFP_KERNEL);
814 goto exit_free_channels;
817 * Initialize Rate list.
819 rt2x00lib_rate(&rates[0], 10, DEV_RATEMASK_1MB,
820 0x00, IEEE80211_RATE_CCK);
821 rt2x00lib_rate(&rates[1], 20, DEV_RATEMASK_2MB,
822 0x01, IEEE80211_RATE_CCK_2);
823 rt2x00lib_rate(&rates[2], 55, DEV_RATEMASK_5_5MB,
824 0x02, IEEE80211_RATE_CCK_2);
825 rt2x00lib_rate(&rates[3], 110, DEV_RATEMASK_11MB,
826 0x03, IEEE80211_RATE_CCK_2);
828 if (spec->num_rates > 4) {
829 rt2x00lib_rate(&rates[4], 60, DEV_RATEMASK_6MB,
830 0x0b, IEEE80211_RATE_OFDM);
831 rt2x00lib_rate(&rates[5], 90, DEV_RATEMASK_9MB,
832 0x0f, IEEE80211_RATE_OFDM);
833 rt2x00lib_rate(&rates[6], 120, DEV_RATEMASK_12MB,
834 0x0a, IEEE80211_RATE_OFDM);
835 rt2x00lib_rate(&rates[7], 180, DEV_RATEMASK_18MB,
836 0x0e, IEEE80211_RATE_OFDM);
837 rt2x00lib_rate(&rates[8], 240, DEV_RATEMASK_24MB,
838 0x09, IEEE80211_RATE_OFDM);
839 rt2x00lib_rate(&rates[9], 360, DEV_RATEMASK_36MB,
840 0x0d, IEEE80211_RATE_OFDM);
841 rt2x00lib_rate(&rates[10], 480, DEV_RATEMASK_48MB,
842 0x08, IEEE80211_RATE_OFDM);
843 rt2x00lib_rate(&rates[11], 540, DEV_RATEMASK_54MB,
844 0x0c, IEEE80211_RATE_OFDM);
848 * Initialize Channel list.
850 for (i = 0; i < spec->num_channels; i++) {
851 if (spec->channels[i].channel <= 14)
852 tx_power = spec->tx_power_bg[i];
853 else if (spec->tx_power_a)
854 tx_power = spec->tx_power_a[i];
856 tx_power = spec->tx_power_default;
858 rt2x00lib_channel(&channels[i],
859 spec->channels[i].channel, tx_power, i);
863 * Intitialize 802.11b
867 if (spec->num_modes > HWMODE_B) {
868 hwmodes[HWMODE_B].mode = MODE_IEEE80211B;
869 hwmodes[HWMODE_B].num_channels = 14;
870 hwmodes[HWMODE_B].num_rates = 4;
871 hwmodes[HWMODE_B].channels = channels;
872 hwmodes[HWMODE_B].rates = rates;
876 * Intitialize 802.11g
880 if (spec->num_modes > HWMODE_G) {
881 hwmodes[HWMODE_G].mode = MODE_IEEE80211G;
882 hwmodes[HWMODE_G].num_channels = 14;
883 hwmodes[HWMODE_G].num_rates = spec->num_rates;
884 hwmodes[HWMODE_G].channels = channels;
885 hwmodes[HWMODE_G].rates = rates;
889 * Intitialize 802.11a
891 * Channels: OFDM, UNII, HiperLAN2.
893 if (spec->num_modes > HWMODE_A) {
894 hwmodes[HWMODE_A].mode = MODE_IEEE80211A;
895 hwmodes[HWMODE_A].num_channels = spec->num_channels - 14;
896 hwmodes[HWMODE_A].num_rates = spec->num_rates - 4;
897 hwmodes[HWMODE_A].channels = &channels[14];
898 hwmodes[HWMODE_A].rates = &rates[4];
901 if (spec->num_modes > HWMODE_G &&
902 ieee80211_register_hwmode(hw, &hwmodes[HWMODE_G]))
903 goto exit_free_rates;
905 if (spec->num_modes > HWMODE_B &&
906 ieee80211_register_hwmode(hw, &hwmodes[HWMODE_B]))
907 goto exit_free_rates;
909 if (spec->num_modes > HWMODE_A &&
910 ieee80211_register_hwmode(hw, &hwmodes[HWMODE_A]))
911 goto exit_free_rates;
913 rt2x00dev->hwmodes = hwmodes;
927 ERROR(rt2x00dev, "Allocation ieee80211 modes failed.\n");
931 static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
933 if (test_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags))
934 ieee80211_unregister_hw(rt2x00dev->hw);
936 if (likely(rt2x00dev->hwmodes)) {
937 kfree(rt2x00dev->hwmodes->channels);
938 kfree(rt2x00dev->hwmodes->rates);
939 kfree(rt2x00dev->hwmodes);
940 rt2x00dev->hwmodes = NULL;
944 static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
946 struct hw_mode_spec *spec = &rt2x00dev->spec;
950 * Initialize HW modes.
952 status = rt2x00lib_probe_hw_modes(rt2x00dev, spec);
959 status = ieee80211_register_hw(rt2x00dev->hw);
961 rt2x00lib_remove_hw(rt2x00dev);
965 __set_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags);
971 * Initialization/uninitialization handlers.
973 static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
975 if (!__test_and_clear_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
981 rt2x00rfkill_unregister(rt2x00dev);
984 * Allow the HW to uninitialize.
986 rt2x00dev->ops->lib->uninitialize(rt2x00dev);
989 * Free allocated queue entries.
991 rt2x00queue_uninitialize(rt2x00dev);
994 static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
998 if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
1002 * Allocate all queue entries.
1004 status = rt2x00queue_initialize(rt2x00dev);
1009 * Initialize the device.
1011 status = rt2x00dev->ops->lib->initialize(rt2x00dev);
1015 __set_bit(DEVICE_INITIALIZED, &rt2x00dev->flags);
1018 * Register the rfkill handler.
1020 status = rt2x00rfkill_register(rt2x00dev);
1027 rt2x00lib_uninitialize(rt2x00dev);
1032 int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
1036 if (test_bit(DEVICE_STARTED, &rt2x00dev->flags))
1040 * If this is the first interface which is added,
1041 * we should load the firmware now.
1043 retval = rt2x00lib_load_firmware(rt2x00dev);
1048 * Initialize the device.
1050 retval = rt2x00lib_initialize(rt2x00dev);
1057 retval = rt2x00lib_enable_radio(rt2x00dev);
1059 rt2x00lib_uninitialize(rt2x00dev);
1063 rt2x00dev->intf_ap_count = 0;
1064 rt2x00dev->intf_sta_count = 0;
1065 rt2x00dev->intf_associated = 0;
1067 __set_bit(DEVICE_STARTED, &rt2x00dev->flags);
1072 void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev)
1074 if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
1078 * Perhaps we can add something smarter here,
1079 * but for now just disabling the radio should do.
1081 rt2x00lib_disable_radio(rt2x00dev);
1083 rt2x00dev->intf_ap_count = 0;
1084 rt2x00dev->intf_sta_count = 0;
1085 rt2x00dev->intf_associated = 0;
1087 __clear_bit(DEVICE_STARTED, &rt2x00dev->flags);
1091 * driver allocation handlers.
1093 int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
1095 int retval = -ENOMEM;
1098 * Make room for rt2x00_intf inside the per-interface
1099 * structure ieee80211_vif.
1101 rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf);
1104 * Let the driver probe the device to detect the capabilities.
1106 retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev);
1108 ERROR(rt2x00dev, "Failed to allocate device.\n");
1113 * Initialize configuration work.
1115 INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
1116 INIT_WORK(&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled);
1117 INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner);
1120 * Allocate queue array.
1122 retval = rt2x00queue_allocate(rt2x00dev);
1127 * Initialize ieee80211 structure.
1129 retval = rt2x00lib_probe_hw(rt2x00dev);
1131 ERROR(rt2x00dev, "Failed to initialize hw.\n");
1138 retval = rt2x00rfkill_allocate(rt2x00dev);
1143 * Open the debugfs entry.
1145 rt2x00debug_register(rt2x00dev);
1147 __set_bit(DEVICE_PRESENT, &rt2x00dev->flags);
1152 rt2x00lib_remove_dev(rt2x00dev);
1156 EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
1158 void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
1160 __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags);
1165 rt2x00lib_disable_radio(rt2x00dev);
1168 * Uninitialize device.
1170 rt2x00lib_uninitialize(rt2x00dev);
1173 * Close debugfs entry.
1175 rt2x00debug_deregister(rt2x00dev);
1180 rt2x00rfkill_free(rt2x00dev);
1183 * Free ieee80211_hw memory.
1185 rt2x00lib_remove_hw(rt2x00dev);
1188 * Free firmware image.
1190 rt2x00lib_free_firmware(rt2x00dev);
1193 * Free queue structures.
1195 rt2x00queue_free(rt2x00dev);
1197 EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
1200 * Device state handlers
1203 int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
1207 NOTICE(rt2x00dev, "Going to sleep.\n");
1208 __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags);
1211 * Only continue if mac80211 has open interfaces.
1213 if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
1215 __set_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags);
1218 * Disable radio and unitialize all items
1219 * that must be recreated on resume.
1221 rt2x00lib_stop(rt2x00dev);
1222 rt2x00lib_uninitialize(rt2x00dev);
1223 rt2x00debug_deregister(rt2x00dev);
1227 * Set device mode to sleep for power management.
1229 retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP);
1235 EXPORT_SYMBOL_GPL(rt2x00lib_suspend);
1237 static void rt2x00lib_resume_intf(void *data, u8 *mac,
1238 struct ieee80211_vif *vif)
1240 struct rt2x00_dev *rt2x00dev = data;
1241 struct rt2x00_intf *intf = vif_to_intf(vif);
1243 spin_lock(&intf->lock);
1245 rt2x00lib_config_intf(rt2x00dev, intf,
1246 vif->type, intf->mac, intf->bssid);
1250 * Master or Ad-hoc mode require a new beacon update.
1252 if (vif->type == IEEE80211_IF_TYPE_AP ||
1253 vif->type == IEEE80211_IF_TYPE_IBSS)
1254 intf->delayed_flags |= DELAYED_UPDATE_BEACON;
1256 spin_unlock(&intf->lock);
1259 int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
1263 NOTICE(rt2x00dev, "Waking up.\n");
1266 * Open the debugfs entry.
1268 rt2x00debug_register(rt2x00dev);
1271 * Only continue if mac80211 had open interfaces.
1273 if (!__test_and_clear_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags))
1277 * Reinitialize device and all active interfaces.
1279 retval = rt2x00lib_start(rt2x00dev);
1284 * Reconfigure device.
1286 rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1);
1287 if (!rt2x00dev->hw->conf.radio_enabled)
1288 rt2x00lib_disable_radio(rt2x00dev);
1291 * Iterator over each active interface to
1292 * reconfigure the hardware.
1294 ieee80211_iterate_active_interfaces(rt2x00dev->hw,
1295 rt2x00lib_resume_intf, rt2x00dev);
1298 * We are ready again to receive requests from mac80211.
1300 __set_bit(DEVICE_PRESENT, &rt2x00dev->flags);
1303 * It is possible that during that mac80211 has attempted
1304 * to send frames while we were suspending or resuming.
1305 * In that case we have disabled the TX queue and should
1306 * now enable it again
1308 ieee80211_start_queues(rt2x00dev->hw);
1311 * During interface iteration we might have changed the
1312 * delayed_flags, time to handles the event by calling
1313 * the work handler directly.
1315 rt2x00lib_intf_scheduled(&rt2x00dev->intf_work);
1320 rt2x00lib_disable_radio(rt2x00dev);
1321 rt2x00lib_uninitialize(rt2x00dev);
1322 rt2x00debug_deregister(rt2x00dev);
1326 EXPORT_SYMBOL_GPL(rt2x00lib_resume);
1327 #endif /* CONFIG_PM */
1330 * rt2x00lib module information.
1332 MODULE_AUTHOR(DRV_PROJECT);
1333 MODULE_VERSION(DRV_VERSION);
1334 MODULE_DESCRIPTION("rt2x00 library");
1335 MODULE_LICENSE("GPL");