2 Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 Abstract: rt2x00 global information.
29 #include <linux/bitops.h>
30 #include <linux/skbuff.h>
31 #include <linux/workqueue.h>
32 #include <linux/firmware.h>
33 #include <linux/mutex.h>
34 #include <linux/etherdevice.h>
36 #include <net/mac80211.h>
38 #include "rt2x00debug.h"
39 #include "rt2x00reg.h"
40 #include "rt2x00queue.h"
45 #define DRV_VERSION "2.0.14"
46 #define DRV_PROJECT "http://rt2x00.serialmonkey.com"
50 * Debug output has to be enabled during compile time.
52 #define DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, __args...) \
53 printk(__kernlvl "%s -> %s: %s - " __msg, \
54 wiphy_name((__dev)->hw->wiphy), __FUNCTION__, __lvl, ##__args)
56 #define DEBUG_PRINTK_PROBE(__kernlvl, __lvl, __msg, __args...) \
57 printk(__kernlvl "%s -> %s: %s - " __msg, \
58 KBUILD_MODNAME, __FUNCTION__, __lvl, ##__args)
60 #ifdef CONFIG_RT2X00_DEBUG
61 #define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
62 DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, ##__args);
64 #define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
66 #endif /* CONFIG_RT2X00_DEBUG */
69 * Various debug levels.
70 * The debug levels PANIC and ERROR both indicate serious problems,
71 * for this reason they should never be ignored.
72 * The special ERROR_PROBE message is for messages that are generated
73 * when the rt2x00_dev is not yet initialized.
75 #define PANIC(__dev, __msg, __args...) \
76 DEBUG_PRINTK_MSG(__dev, KERN_CRIT, "Panic", __msg, ##__args)
77 #define ERROR(__dev, __msg, __args...) \
78 DEBUG_PRINTK_MSG(__dev, KERN_ERR, "Error", __msg, ##__args)
79 #define ERROR_PROBE(__msg, __args...) \
80 DEBUG_PRINTK_PROBE(KERN_ERR, "Error", __msg, ##__args)
81 #define WARNING(__dev, __msg, __args...) \
82 DEBUG_PRINTK(__dev, KERN_WARNING, "Warning", __msg, ##__args)
83 #define NOTICE(__dev, __msg, __args...) \
84 DEBUG_PRINTK(__dev, KERN_NOTICE, "Notice", __msg, ##__args)
85 #define INFO(__dev, __msg, __args...) \
86 DEBUG_PRINTK(__dev, KERN_INFO, "Info", __msg, ##__args)
87 #define DEBUG(__dev, __msg, __args...) \
88 DEBUG_PRINTK(__dev, KERN_DEBUG, "Debug", __msg, ##__args)
89 #define EEPROM(__dev, __msg, __args...) \
90 DEBUG_PRINTK(__dev, KERN_DEBUG, "EEPROM recovery", __msg, ##__args)
93 * Standard timing and size defines.
94 * These values should follow the ieee80211 specifications.
97 #define IEEE80211_HEADER 24
101 #define SHORT_PREAMBLE 72
103 #define SHORT_SLOT_TIME 9
105 #define PIFS ( SIFS + SLOT_TIME )
106 #define SHORT_PIFS ( SIFS + SHORT_SLOT_TIME )
107 #define DIFS ( PIFS + SLOT_TIME )
108 #define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME )
109 #define EIFS ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) )
112 * IEEE802.11 header defines
114 static inline int is_rts_frame(u16 fc)
116 return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) &&
117 ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_RTS));
120 static inline int is_cts_frame(u16 fc)
122 return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) &&
123 ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_CTS));
126 static inline int is_probe_resp(u16 fc)
128 return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) &&
129 ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP));
132 static inline int is_beacon(u16 fc)
134 return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) &&
135 ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON));
139 * Chipset identification
140 * The chipset on the device is composed of a RT and RF chip.
141 * The chipset combination is important for determining device capabilities.
145 #define RT2460 0x0101
146 #define RT2560 0x0201
147 #define RT2570 0x1201
148 #define RT2561s 0x0301 /* Turbo */
149 #define RT2561 0x0302
150 #define RT2661 0x0401
151 #define RT2571 0x1300
158 * RF register values that belong to a particular channel.
169 * Antenna setup values.
171 struct antenna_setup {
177 * Quality statistics about the currently active link.
181 * Statistics required for Link tuning.
182 * For the average RSSI value we use the "Walking average" approach.
183 * When adding RSSI to the average value the following calculation
186 * avg_rssi = ((avg_rssi * 7) + rssi) / 8;
188 * The advantage of this approach is that we only need 1 variable
189 * to store the average in (No need for a count and a total).
190 * But more importantly, normal average values will over time
191 * move less and less towards newly added values this results
192 * that with link tuning, the device can have a very good RSSI
193 * for a few minutes but when the device is moved away from the AP
194 * the average will not decrease fast enough to compensate.
195 * The walking average compensates this and will move towards
196 * the new values correctly allowing a effective link tuning.
202 * Statistics required for Signal quality calculation.
203 * For calculating the Signal quality we have to determine
204 * the total number of success and failed RX and TX frames.
205 * After that we also use the average RSSI value to help
206 * determining the signal quality.
207 * For the calculation we will use the following algorithm:
209 * rssi_percentage = (avg_rssi * 100) / rssi_offset
210 * rx_percentage = (rx_success * 100) / rx_total
211 * tx_percentage = (tx_success * 100) / tx_total
212 * avg_signal = ((WEIGHT_RSSI * avg_rssi) +
213 * (WEIGHT_TX * tx_percentage) +
214 * (WEIGHT_RX * rx_percentage)) / 100
216 * This value should then be checked to not be greated then 100.
224 #define WEIGHT_RSSI 20
230 * Antenna settings about the currently active link.
237 #define ANTENNA_RX_DIVERSITY 0x00000001
238 #define ANTENNA_TX_DIVERSITY 0x00000002
239 #define ANTENNA_MODE_SAMPLE 0x00000004
242 * Currently active TX/RX antenna setup.
243 * When software diversity is used, this will indicate
244 * which antenna is actually used at this time.
246 struct antenna_setup active;
249 * RSSI information for the different antenna's.
250 * These statistics are used to determine when
251 * to switch antenna when using software diversity.
253 * rssi[0] -> Antenna A RSSI
254 * rssi[1] -> Antenna B RSSI
259 * Current RSSI average of the currently active antenna.
260 * Similar to the avg_rssi in the link_qual structure
261 * this value is updated by using the walking average.
267 * To optimize the quality of the link we need to store
268 * the quality of received frames and periodically
274 * The number of times the link has been tuned
275 * since the radio has been switched on.
280 * Quality measurement values.
282 struct link_qual qual;
285 * TX/RX antenna setup.
295 * Work structure for scheduling periodic link tuning.
297 struct delayed_work work;
301 * Small helper macro to work with moving/walking averages.
303 #define MOVING_AVERAGE(__avg, __val, __samples) \
304 ( (((__avg) * ((__samples) - 1)) + (__val)) / (__samples) )
307 * When we lack RSSI information return something less then -80 to
308 * tell the driver to tune the device to maximum sensitivity.
310 #define DEFAULT_RSSI ( -128 )
313 * Link quality access functions.
315 static inline int rt2x00_get_link_rssi(struct link *link)
317 if (link->qual.avg_rssi && link->qual.rx_success)
318 return link->qual.avg_rssi;
322 static inline int rt2x00_get_link_ant_rssi(struct link *link)
324 if (link->ant.rssi_ant && link->qual.rx_success)
325 return link->ant.rssi_ant;
329 static inline int rt2x00_get_link_ant_rssi_history(struct link *link,
332 if (link->ant.rssi_history[ant - ANTENNA_A])
333 return link->ant.rssi_history[ant - ANTENNA_A];
337 static inline int rt2x00_update_ant_rssi(struct link *link, int rssi)
339 int old_rssi = link->ant.rssi_history[link->ant.active.rx - ANTENNA_A];
340 link->ant.rssi_history[link->ant.active.rx - ANTENNA_A] = rssi;
345 * Interface structure
346 * Per interface configuration details, this structure
347 * is allocated as the private data for ieee80211_vif.
351 * All fields within the rt2x00_intf structure
352 * must be protected with a spinlock.
357 * BSS configuration. Copied from the structure
358 * passed to us through the bss_info_changed()
361 struct ieee80211_bss_conf conf;
369 * BBSID of the AP to associate with.
374 * Entry in the beacon queue which belongs to
375 * this interface. Each interface has its own
376 * dedicated beacon entry.
378 struct queue_entry *beacon;
381 * Actions that needed rescheduling.
383 unsigned int delayed_flags;
384 #define DELAYED_UPDATE_BEACON 0x00000001
385 #define DELAYED_CONFIG_PREAMBLE 0x00000002
388 static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
390 return (struct rt2x00_intf *)vif->drv_priv;
394 * Details about the supported modes, rates and channels
395 * of a particular chipset. This is used by rt2x00lib
396 * to build the ieee80211_hw_mode array for mac80211.
398 struct hw_mode_spec {
400 * Number of modes, rates and channels.
409 const u8 *tx_power_a;
410 const u8 *tx_power_bg;
414 * Device/chipset specific value.
416 const struct rf_channel *channels;
420 * Configuration structure wrapper around the
421 * mac80211 configuration structure.
422 * When mac80211 configures the driver, rt2x00lib
423 * can precalculate values which are equal for all
424 * rt2x00 drivers. Those values can be stored in here.
426 struct rt2x00lib_conf {
427 struct ieee80211_conf *conf;
428 struct rf_channel rf;
430 struct antenna_setup ant;
432 enum ieee80211_band band;
444 * Configuration structure wrapper around the
445 * rt2x00 interface configuration handler.
447 struct rt2x00intf_conf {
451 enum ieee80211_if_types type;
454 * TSF sync value, this is dependant on the operation type.
459 * The MAC and BSSID addressess are simple array of bytes,
460 * these arrays are little endian, so when sending the addressess
461 * to the drivers, copy the it into a endian-signed variable.
463 * Note that all devices (except rt2500usb) have 32 bits
464 * register word sizes. This means that whatever variable we
465 * pass _must_ be a multiple of 32 bits. Otherwise the device
466 * might not accept what we are sending to it.
467 * This will also make it easier for the driver to write
468 * the data to the device.
475 * rt2x00lib callback functions.
477 struct rt2x00lib_ops {
479 * Interrupt handlers.
481 irq_handler_t irq_handler;
484 * Device init handlers.
486 int (*probe_hw) (struct rt2x00_dev *rt2x00dev);
487 char *(*get_firmware_name) (struct rt2x00_dev *rt2x00dev);
488 int (*load_firmware) (struct rt2x00_dev *rt2x00dev, void *data,
492 * Device initialization/deinitialization handlers.
494 int (*initialize) (struct rt2x00_dev *rt2x00dev);
495 void (*uninitialize) (struct rt2x00_dev *rt2x00dev);
498 * queue initialization handlers
500 void (*init_rxentry) (struct rt2x00_dev *rt2x00dev,
501 struct queue_entry *entry);
502 void (*init_txentry) (struct rt2x00_dev *rt2x00dev,
503 struct queue_entry *entry);
506 * Radio control handlers.
508 int (*set_device_state) (struct rt2x00_dev *rt2x00dev,
509 enum dev_state state);
510 int (*rfkill_poll) (struct rt2x00_dev *rt2x00dev);
511 void (*link_stats) (struct rt2x00_dev *rt2x00dev,
512 struct link_qual *qual);
513 void (*reset_tuner) (struct rt2x00_dev *rt2x00dev);
514 void (*link_tuner) (struct rt2x00_dev *rt2x00dev);
517 * TX control handlers
519 void (*write_tx_desc) (struct rt2x00_dev *rt2x00dev,
521 struct txentry_desc *txdesc,
522 struct ieee80211_tx_control *control);
523 int (*write_tx_data) (struct rt2x00_dev *rt2x00dev,
524 struct data_queue *queue, struct sk_buff *skb,
525 struct ieee80211_tx_control *control);
526 int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev,
527 struct sk_buff *skb);
528 void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev,
529 const unsigned int queue);
532 * RX control handlers
534 void (*fill_rxdone) (struct queue_entry *entry,
535 struct rxdone_entry_desc *rxdesc);
538 * Configuration handlers.
540 void (*config_intf) (struct rt2x00_dev *rt2x00dev,
541 struct rt2x00_intf *intf,
542 struct rt2x00intf_conf *conf,
543 const unsigned int flags);
544 #define CONFIG_UPDATE_TYPE ( 1 << 1 )
545 #define CONFIG_UPDATE_MAC ( 1 << 2 )
546 #define CONFIG_UPDATE_BSSID ( 1 << 3 )
548 int (*config_preamble) (struct rt2x00_dev *rt2x00dev,
549 const int short_preamble,
550 const int ack_timeout,
551 const int ack_consume_time);
552 void (*config) (struct rt2x00_dev *rt2x00dev,
553 struct rt2x00lib_conf *libconf,
554 const unsigned int flags);
555 #define CONFIG_UPDATE_PHYMODE ( 1 << 1 )
556 #define CONFIG_UPDATE_CHANNEL ( 1 << 2 )
557 #define CONFIG_UPDATE_TXPOWER ( 1 << 3 )
558 #define CONFIG_UPDATE_ANTENNA ( 1 << 4 )
559 #define CONFIG_UPDATE_SLOT_TIME ( 1 << 5 )
560 #define CONFIG_UPDATE_BEACON_INT ( 1 << 6 )
561 #define CONFIG_UPDATE_ALL 0xffff
565 * rt2x00 driver callback operation structure.
569 const unsigned int max_sta_intf;
570 const unsigned int max_ap_intf;
571 const unsigned int eeprom_size;
572 const unsigned int rf_size;
573 const struct data_queue_desc *rx;
574 const struct data_queue_desc *tx;
575 const struct data_queue_desc *bcn;
576 const struct data_queue_desc *atim;
577 const struct rt2x00lib_ops *lib;
578 const struct ieee80211_ops *hw;
579 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
580 const struct rt2x00debug *debugfs;
581 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
585 * rt2x00 device flags
592 DEVICE_REGISTERED_HW,
595 DEVICE_STARTED_SUSPEND,
596 DEVICE_ENABLED_RADIO,
597 DEVICE_DISABLED_RADIO_HW,
602 DRIVER_SUPPORT_MIXED_INTERFACES,
603 DRIVER_REQUIRE_FIRMWARE,
604 DRIVER_REQUIRE_FIRMWARE_CRC_ITU_T,
605 DRIVER_REQUIRE_FIRMWARE_CCITT,
606 DRIVER_REQUIRE_BEACON_GUARD,
607 DRIVER_REQUIRE_ATIM_QUEUE,
610 * Driver configuration
612 CONFIG_SUPPORT_HW_BUTTON,
615 CONFIG_EXTERNAL_LNA_A,
616 CONFIG_EXTERNAL_LNA_BG,
617 CONFIG_DOUBLE_ANTENNA,
618 CONFIG_DISABLE_LINK_TUNING,
622 * rt2x00 device structure.
627 * The structure stored in here depends on the
628 * system bus (PCI or USB).
629 * When accessing this variable, the rt2x00dev_{pci,usb}
630 * macro's should be used for correct typecasting.
633 #define rt2x00dev_pci(__dev) ( (struct pci_dev *)(__dev)->dev )
634 #define rt2x00dev_usb(__dev) ( (struct usb_interface *)(__dev)->dev )
635 #define rt2x00dev_usb_dev(__dev)\
636 ( (struct usb_device *)interface_to_usbdev(rt2x00dev_usb(__dev)) )
639 * Callback functions.
641 const struct rt2x00_ops *ops;
644 * IEEE80211 control structure.
646 struct ieee80211_hw *hw;
647 struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
648 enum ieee80211_band curr_band;
651 * rfkill structure for RF state switching support.
652 * This will only be compiled in when required.
654 #ifdef CONFIG_RT2X00_LIB_RFKILL
655 struct rfkill *rfkill;
656 struct input_polled_dev *poll_dev;
657 #endif /* CONFIG_RT2X00_LIB_RFKILL */
660 * If enabled, the debugfs interface structures
661 * required for deregistration of debugfs.
663 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
664 struct rt2x00debug_intf *debugfs_intf;
665 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
669 * In these flags the current status and some
670 * of the device capabilities are stored.
675 * Chipset identification.
677 struct rt2x00_chip chip;
680 * hw capability specifications.
682 struct hw_mode_spec spec;
685 * This is the default TX/RX antenna setup as indicated
686 * by the device's EEPROM. When mac80211 sets its
687 * antenna value to 0 we should be using these values.
689 struct antenna_setup default_ant;
693 * csr_addr: Base register address. (PCI)
694 * csr_cache: CSR cache for usb_control_msg. (USB)
696 void __iomem *csr_addr;
700 * Mutex to protect register accesses on USB devices.
701 * There are 2 reasons this is needed, one is to ensure
702 * use of the csr_cache (for USB devices) by one thread
703 * isn't corrupted by another thread trying to access it.
704 * The other is that access to BBP and RF registers
705 * require multiple BUS transactions and if another thread
706 * attempted to access one of those registers at the same
707 * time one of the writes could silently fail.
709 struct mutex usb_cache_mutex;
712 * Current packet filter configuration for the device.
713 * This contains all currently active FIF_* flags send
714 * to us by mac80211 during configure_filter().
716 unsigned int packet_filter;
720 * - Open ap interface count.
721 * - Open sta interface count.
722 * - Association count.
724 unsigned int intf_ap_count;
725 unsigned int intf_sta_count;
726 unsigned int intf_associated;
739 * Active RF register values.
740 * These are stored here so we don't need
741 * to read the rf registers and can directly
742 * use this value instead.
743 * This field should be accessed by using
744 * rt2x00_rf_read() and rt2x00_rf_write().
749 * USB Max frame size (for rt2500usb & rt73usb).
754 * Current TX power value.
759 * LED register (for rt61pci & rt73usb).
764 * Led mode (LED_MODE_*)
769 * Rssi <-> Dbm offset
774 * Frequency offset (for rt61pci & rt73usb).
779 * Low level statistics which will have
780 * to be kept up to date while device is running.
782 struct ieee80211_low_level_stats low_level_stats;
785 * RX configuration information.
787 struct ieee80211_rx_status rx_status;
792 struct work_struct intf_work;
793 struct work_struct filter_work;
796 * Data queue arrays for RX, TX and Beacon.
797 * The Beacon array also contains the Atim queue
798 * if that is supported by the device.
801 struct data_queue *rx;
802 struct data_queue *tx;
803 struct data_queue *bcn;
808 const struct firmware *fw;
813 * The RF is being accessed by word index.
815 static inline void rt2x00_rf_read(struct rt2x00_dev *rt2x00dev,
816 const unsigned int word, u32 *data)
818 *data = rt2x00dev->rf[word];
821 static inline void rt2x00_rf_write(struct rt2x00_dev *rt2x00dev,
822 const unsigned int word, u32 data)
824 rt2x00dev->rf[word] = data;
828 * Generic EEPROM access.
829 * The EEPROM is being accessed by word index.
831 static inline void *rt2x00_eeprom_addr(struct rt2x00_dev *rt2x00dev,
832 const unsigned int word)
834 return (void *)&rt2x00dev->eeprom[word];
837 static inline void rt2x00_eeprom_read(struct rt2x00_dev *rt2x00dev,
838 const unsigned int word, u16 *data)
840 *data = le16_to_cpu(rt2x00dev->eeprom[word]);
843 static inline void rt2x00_eeprom_write(struct rt2x00_dev *rt2x00dev,
844 const unsigned int word, u16 data)
846 rt2x00dev->eeprom[word] = cpu_to_le16(data);
852 static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev,
853 const u16 rt, const u16 rf, const u32 rev)
856 "Chipset detected - rt: %04x, rf: %04x, rev: %08x.\n",
859 rt2x00dev->chip.rt = rt;
860 rt2x00dev->chip.rf = rf;
861 rt2x00dev->chip.rev = rev;
864 static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip)
866 return (chipset->rt == chip);
869 static inline char rt2x00_rf(const struct rt2x00_chip *chipset, const u16 chip)
871 return (chipset->rf == chip);
874 static inline u16 rt2x00_rev(const struct rt2x00_chip *chipset)
879 static inline u16 rt2x00_check_rev(const struct rt2x00_chip *chipset,
882 return (((chipset->rev & 0xffff0) == rev) &&
883 !!(chipset->rev & 0x0000f));
887 * Duration calculations
888 * The rate variable passed is: 100kbs.
889 * To convert from bytes to bits we multiply size with 8,
890 * then the size is multiplied with 10 to make the
891 * real rate -> rate argument correction.
893 static inline u16 get_duration(const unsigned int size, const u8 rate)
895 return ((size * 8 * 10) / rate);
898 static inline u16 get_duration_res(const unsigned int size, const u8 rate)
900 return ((size * 8 * 10) % rate);
904 * rt2x00queue_get_queue - Convert mac80211 queue index to rt2x00 queue
905 * @rt2x00dev: Pointer to &struct rt2x00_dev.
906 * @queue: mac80211/rt2x00 queue index
907 * (see &enum ieee80211_tx_queue and &enum rt2x00_bcn_queue).
909 struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev,
910 const unsigned int queue);
913 * rt2x00queue_get_entry - Get queue entry where the given index points to.
914 * @rt2x00dev: Pointer to &struct rt2x00_dev.
915 * @index: Index identifier for obtaining the correct index.
917 struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue,
918 enum queue_index index);
921 * rt2x00queue_index_inc - Index incrementation function
922 * @queue: Queue (&struct data_queue) to perform the action on.
923 * @action: Index type (&enum queue_index) to perform the action on.
925 * This function will increase the requested index on the queue,
926 * it will grab the appropriate locks and handle queue overflow events by
927 * resetting the index to the start of the queue.
929 void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index);
933 * Interrupt context handlers.
935 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev);
936 void rt2x00lib_txdone(struct queue_entry *entry,
937 struct txdone_entry_desc *txdesc);
938 void rt2x00lib_rxdone(struct queue_entry *entry,
939 struct rxdone_entry_desc *rxdesc);
942 * TX descriptor initializer
944 void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev,
946 struct ieee80211_tx_control *control);
951 int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
952 struct ieee80211_tx_control *control);
953 int rt2x00mac_start(struct ieee80211_hw *hw);
954 void rt2x00mac_stop(struct ieee80211_hw *hw);
955 int rt2x00mac_add_interface(struct ieee80211_hw *hw,
956 struct ieee80211_if_init_conf *conf);
957 void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
958 struct ieee80211_if_init_conf *conf);
959 int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
960 int rt2x00mac_config_interface(struct ieee80211_hw *hw,
961 struct ieee80211_vif *vif,
962 struct ieee80211_if_conf *conf);
963 int rt2x00mac_get_stats(struct ieee80211_hw *hw,
964 struct ieee80211_low_level_stats *stats);
965 int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,
966 struct ieee80211_tx_queue_stats *stats);
967 void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
968 struct ieee80211_vif *vif,
969 struct ieee80211_bss_conf *bss_conf,
971 int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue,
972 const struct ieee80211_tx_queue_params *params);
975 * Driver allocation handlers.
977 int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev);
978 void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev);
980 int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state);
981 int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev);
982 #endif /* CONFIG_PM */
984 #endif /* RT2X00_H */