2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 Abstract: rt2500usb device specific routines.
24 Supported chipsets: RT2570.
28 * Set enviroment defines for rt2x00.h
30 #define DRV_NAME "rt2500usb"
32 #include <linux/delay.h>
33 #include <linux/etherdevice.h>
34 #include <linux/init.h>
35 #include <linux/kernel.h>
36 #include <linux/module.h>
37 #include <linux/usb.h>
40 #include "rt2x00usb.h"
41 #include "rt2500usb.h"
45 * All access to the CSR registers will go through the methods
46 * rt2500usb_register_read and rt2500usb_register_write.
47 * BBP and RF register require indirect register access,
48 * and use the CSR registers BBPCSR and RFCSR to achieve this.
49 * These indirect registers work with busy bits,
50 * and we will try maximal REGISTER_BUSY_COUNT times to access
51 * the register while taking a REGISTER_BUSY_DELAY us delay
52 * between each attampt. When the busy bit is still set at that time,
53 * the access attempt is considered to have failed,
54 * and we will print an error.
56 static inline void rt2500usb_register_read(const struct rt2x00_dev *rt2x00dev,
57 const unsigned int offset,
61 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
62 USB_VENDOR_REQUEST_IN, offset,
63 ®, sizeof(u16), REGISTER_TIMEOUT);
64 *value = le16_to_cpu(reg);
67 static inline void rt2500usb_register_multiread(const struct rt2x00_dev
69 const unsigned int offset,
70 void *value, const u16 length)
72 int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
73 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
74 USB_VENDOR_REQUEST_IN, offset,
75 value, length, timeout);
78 static inline void rt2500usb_register_write(const struct rt2x00_dev *rt2x00dev,
79 const unsigned int offset,
82 __le16 reg = cpu_to_le16(value);
83 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
84 USB_VENDOR_REQUEST_OUT, offset,
85 ®, sizeof(u16), REGISTER_TIMEOUT);
88 static inline void rt2500usb_register_multiwrite(const struct rt2x00_dev
90 const unsigned int offset,
91 void *value, const u16 length)
93 int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
94 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
95 USB_VENDOR_REQUEST_OUT, offset,
96 value, length, timeout);
99 static u16 rt2500usb_bbp_check(const struct rt2x00_dev *rt2x00dev)
104 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
105 rt2500usb_register_read(rt2x00dev, PHY_CSR8, ®);
106 if (!rt2x00_get_field16(reg, PHY_CSR8_BUSY))
108 udelay(REGISTER_BUSY_DELAY);
114 static void rt2500usb_bbp_write(const struct rt2x00_dev *rt2x00dev,
115 const unsigned int word, const u8 value)
120 * Wait until the BBP becomes ready.
122 reg = rt2500usb_bbp_check(rt2x00dev);
123 if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
124 ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
129 * Write the data into the BBP.
132 rt2x00_set_field16(®, PHY_CSR7_DATA, value);
133 rt2x00_set_field16(®, PHY_CSR7_REG_ID, word);
134 rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 0);
136 rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg);
139 static void rt2500usb_bbp_read(const struct rt2x00_dev *rt2x00dev,
140 const unsigned int word, u8 *value)
145 * Wait until the BBP becomes ready.
147 reg = rt2500usb_bbp_check(rt2x00dev);
148 if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
149 ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
154 * Write the request into the BBP.
157 rt2x00_set_field16(®, PHY_CSR7_REG_ID, word);
158 rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 1);
160 rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg);
163 * Wait until the BBP becomes ready.
165 reg = rt2500usb_bbp_check(rt2x00dev);
166 if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
167 ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
172 rt2500usb_register_read(rt2x00dev, PHY_CSR7, ®);
173 *value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
176 static void rt2500usb_rf_write(const struct rt2x00_dev *rt2x00dev,
177 const unsigned int word, const u32 value)
185 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
186 rt2500usb_register_read(rt2x00dev, PHY_CSR10, ®);
187 if (!rt2x00_get_field16(reg, PHY_CSR10_RF_BUSY))
189 udelay(REGISTER_BUSY_DELAY);
192 ERROR(rt2x00dev, "PHY_CSR10 register busy. Write failed.\n");
197 rt2x00_set_field16(®, PHY_CSR9_RF_VALUE, value);
198 rt2500usb_register_write(rt2x00dev, PHY_CSR9, reg);
201 rt2x00_set_field16(®, PHY_CSR10_RF_VALUE, value >> 16);
202 rt2x00_set_field16(®, PHY_CSR10_RF_NUMBER_OF_BITS, 20);
203 rt2x00_set_field16(®, PHY_CSR10_RF_IF_SELECT, 0);
204 rt2x00_set_field16(®, PHY_CSR10_RF_BUSY, 1);
206 rt2500usb_register_write(rt2x00dev, PHY_CSR10, reg);
207 rt2x00_rf_write(rt2x00dev, word, value);
210 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
211 #define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u16)) )
213 static void rt2500usb_read_csr(const struct rt2x00_dev *rt2x00dev,
214 const unsigned int word, u32 *data)
216 rt2500usb_register_read(rt2x00dev, CSR_OFFSET(word), (u16 *) data);
219 static void rt2500usb_write_csr(const struct rt2x00_dev *rt2x00dev,
220 const unsigned int word, u32 data)
222 rt2500usb_register_write(rt2x00dev, CSR_OFFSET(word), data);
225 static const struct rt2x00debug rt2500usb_rt2x00debug = {
226 .owner = THIS_MODULE,
228 .read = rt2500usb_read_csr,
229 .write = rt2500usb_write_csr,
230 .word_size = sizeof(u16),
231 .word_count = CSR_REG_SIZE / sizeof(u16),
234 .read = rt2x00_eeprom_read,
235 .write = rt2x00_eeprom_write,
236 .word_size = sizeof(u16),
237 .word_count = EEPROM_SIZE / sizeof(u16),
240 .read = rt2500usb_bbp_read,
241 .write = rt2500usb_bbp_write,
242 .word_size = sizeof(u8),
243 .word_count = BBP_SIZE / sizeof(u8),
246 .read = rt2x00_rf_read,
247 .write = rt2500usb_rf_write,
248 .word_size = sizeof(u32),
249 .word_count = RF_SIZE / sizeof(u32),
252 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
255 * Configuration handlers.
257 static void rt2500usb_config_mac_addr(struct rt2x00_dev *rt2x00dev,
260 rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, &mac,
261 (3 * sizeof(__le16)));
264 static void rt2500usb_config_bssid(struct rt2x00_dev *rt2x00dev,
267 rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, bssid,
268 (3 * sizeof(__le16)));
271 static void rt2500usb_config_type(struct rt2x00_dev *rt2x00dev, const int type,
276 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
279 * Enable beacon config
281 rt2500usb_register_read(rt2x00dev, TXRX_CSR20, ®);
282 rt2x00_set_field16(®, TXRX_CSR20_OFFSET,
283 (PREAMBLE + get_duration(IEEE80211_HEADER, 20)) >> 6);
284 if (type == IEEE80211_IF_TYPE_STA)
285 rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, 0);
287 rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, 2);
288 rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg);
291 * Enable synchronisation.
293 rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®);
294 rt2x00_set_field16(®, TXRX_CSR18_OFFSET, 0);
295 rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
297 rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®);
298 rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1);
299 rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1);
300 rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0);
301 rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, tsf_sync);
302 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
305 static void rt2500usb_config_rate(struct rt2x00_dev *rt2x00dev, const int rate)
307 struct ieee80211_conf *conf = &rt2x00dev->hw->conf;
312 if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE))
313 preamble = SHORT_PREAMBLE;
317 reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK;
319 rt2500usb_register_write(rt2x00dev, TXRX_CSR11, reg);
321 rt2500usb_register_read(rt2x00dev, TXRX_CSR1, ®);
322 value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ?
324 PLCP + preamble + get_duration(ACK_SIZE, 10);
325 rt2x00_set_field16(®, TXRX_CSR1_ACK_TIMEOUT, value);
326 rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
328 rt2500usb_register_read(rt2x00dev, TXRX_CSR10, ®);
329 if (preamble == SHORT_PREAMBLE)
330 rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE, 1);
332 rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE, 0);
333 rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg);
336 static void rt2500usb_config_phymode(struct rt2x00_dev *rt2x00dev,
339 struct ieee80211_hw_mode *mode;
340 struct ieee80211_rate *rate;
342 if (phymode == MODE_IEEE80211A)
343 rt2x00dev->curr_hwmode = HWMODE_A;
344 else if (phymode == MODE_IEEE80211B)
345 rt2x00dev->curr_hwmode = HWMODE_B;
347 rt2x00dev->curr_hwmode = HWMODE_G;
349 mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode];
350 rate = &mode->rates[mode->num_rates - 1];
352 rt2500usb_config_rate(rt2x00dev, rate->val2);
354 if (phymode == MODE_IEEE80211B) {
355 rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x000b);
356 rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x0040);
358 rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0005);
359 rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x016c);
363 static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev,
364 const int index, const int channel,
367 struct rf_channel reg;
370 * Fill rf_reg structure.
372 memcpy(®, &rt2x00dev->spec.channels[index], sizeof(reg));
377 rt2x00_set_field32(®.rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
380 * For RT2525E we should first set the channel to half band higher.
382 if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
383 static const u32 vals[] = {
384 0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
385 0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba,
386 0x000008ba, 0x000008be, 0x000008b7, 0x00000902,
387 0x00000902, 0x00000906
390 rt2500usb_rf_write(rt2x00dev, 2, vals[channel - 1]);
392 rt2500usb_rf_write(rt2x00dev, 4, reg.rf4);
395 rt2500usb_rf_write(rt2x00dev, 1, reg.rf1);
396 rt2500usb_rf_write(rt2x00dev, 2, reg.rf2);
397 rt2500usb_rf_write(rt2x00dev, 3, reg.rf3);
399 rt2500usb_rf_write(rt2x00dev, 4, reg.rf4);
402 static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev,
407 rt2x00_rf_read(rt2x00dev, 3, &rf3);
408 rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
409 rt2500usb_rf_write(rt2x00dev, 3, rf3);
412 static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev,
413 const int antenna_tx, const int antenna_rx)
420 rt2500usb_bbp_read(rt2x00dev, 2, &r2);
421 rt2500usb_bbp_read(rt2x00dev, 14, &r14);
422 rt2500usb_register_read(rt2x00dev, PHY_CSR5, &csr5);
423 rt2500usb_register_read(rt2x00dev, PHY_CSR6, &csr6);
426 * Configure the TX antenna.
428 switch (antenna_tx) {
429 case ANTENNA_SW_DIVERSITY:
430 case ANTENNA_HW_DIVERSITY:
431 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 1);
432 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 1);
433 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 1);
436 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
437 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0);
438 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0);
441 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
442 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2);
443 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 2);
448 * Configure the RX antenna.
450 switch (antenna_rx) {
451 case ANTENNA_SW_DIVERSITY:
452 case ANTENNA_HW_DIVERSITY:
453 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 1);
456 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
459 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
464 * RT2525E and RT5222 need to flip TX I/Q
466 if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
467 rt2x00_rf(&rt2x00dev->chip, RF5222)) {
468 rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
469 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1);
470 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1);
473 * RT2525E does not need RX I/Q Flip.
475 if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
476 rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
478 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0);
479 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 0);
482 rt2500usb_bbp_write(rt2x00dev, 2, r2);
483 rt2500usb_bbp_write(rt2x00dev, 14, r14);
484 rt2500usb_register_write(rt2x00dev, PHY_CSR5, csr5);
485 rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6);
488 static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev,
489 const int short_slot_time,
490 const int beacon_int)
494 rt2500usb_register_write(rt2x00dev, MAC_CSR10,
495 short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME);
497 rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®);
498 rt2x00_set_field16(®, TXRX_CSR18_INTERVAL, beacon_int * 4);
499 rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
502 static void rt2500usb_config(struct rt2x00_dev *rt2x00dev,
503 const unsigned int flags,
504 struct ieee80211_conf *conf)
506 int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME;
508 if (flags & CONFIG_UPDATE_PHYMODE)
509 rt2500usb_config_phymode(rt2x00dev, conf->phymode);
510 if (flags & CONFIG_UPDATE_CHANNEL)
511 rt2500usb_config_channel(rt2x00dev, conf->channel_val,
512 conf->channel, conf->power_level);
513 if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
514 rt2500usb_config_txpower(rt2x00dev, conf->power_level);
515 if (flags & CONFIG_UPDATE_ANTENNA)
516 rt2500usb_config_antenna(rt2x00dev, conf->antenna_sel_tx,
517 conf->antenna_sel_rx);
518 if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
519 rt2500usb_config_duration(rt2x00dev, short_slot_time,
526 static void rt2500usb_enable_led(struct rt2x00_dev *rt2x00dev)
530 rt2500usb_register_read(rt2x00dev, MAC_CSR21, ®);
531 rt2x00_set_field16(®, MAC_CSR21_ON_PERIOD, 70);
532 rt2x00_set_field16(®, MAC_CSR21_OFF_PERIOD, 30);
533 rt2500usb_register_write(rt2x00dev, MAC_CSR21, reg);
535 rt2500usb_register_read(rt2x00dev, MAC_CSR20, ®);
537 if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) {
538 rt2x00_set_field16(®, MAC_CSR20_LINK, 1);
539 rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 0);
540 } else if (rt2x00dev->led_mode == LED_MODE_ASUS) {
541 rt2x00_set_field16(®, MAC_CSR20_LINK, 0);
542 rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 1);
544 rt2x00_set_field16(®, MAC_CSR20_LINK, 1);
545 rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 1);
548 rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg);
551 static void rt2500usb_disable_led(struct rt2x00_dev *rt2x00dev)
555 rt2500usb_register_read(rt2x00dev, MAC_CSR20, ®);
556 rt2x00_set_field16(®, MAC_CSR20_LINK, 0);
557 rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 0);
558 rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg);
564 static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev)
569 * Update FCS error count from register.
571 rt2500usb_register_read(rt2x00dev, STA_CSR0, ®);
572 rt2x00dev->link.rx_failed = rt2x00_get_field16(reg, STA_CSR0_FCS_ERROR);
575 * Update False CCA count from register.
577 rt2500usb_register_read(rt2x00dev, STA_CSR3, ®);
578 rt2x00dev->link.false_cca =
579 rt2x00_get_field16(reg, STA_CSR3_FALSE_CCA_ERROR);
582 static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
587 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &eeprom);
588 value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R24_LOW);
589 rt2500usb_bbp_write(rt2x00dev, 24, value);
591 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &eeprom);
592 value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R25_LOW);
593 rt2500usb_bbp_write(rt2x00dev, 25, value);
595 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &eeprom);
596 value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R61_LOW);
597 rt2500usb_bbp_write(rt2x00dev, 61, value);
599 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &eeprom);
600 value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_VGCUPPER);
601 rt2500usb_bbp_write(rt2x00dev, 17, value);
603 rt2x00dev->link.vgc_level = value;
606 static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev)
608 int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
621 * Determine the BBP tuning threshold and correctly
622 * set BBP 24, 25 and 61.
624 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh);
625 bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD);
627 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24);
628 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25);
629 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61);
631 if ((rssi + bbp_thresh) > 0) {
632 r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH);
633 r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH);
634 r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH);
636 r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW);
637 r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW);
638 r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW);
641 rt2500usb_bbp_write(rt2x00dev, 24, r24);
642 rt2500usb_bbp_write(rt2x00dev, 25, r25);
643 rt2500usb_bbp_write(rt2x00dev, 61, r61);
646 * Read current r17 value, as well as the sensitivity values
647 * for the r17 register.
649 rt2500usb_bbp_read(rt2x00dev, 17, &r17);
650 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens);
653 * A too low RSSI will cause too much false CCA which will
654 * then corrupt the R17 tuning. To remidy this the tuning should
655 * be stopped (While making sure the R17 value will not exceed limits)
659 rt2500usb_bbp_write(rt2x00dev, 17, 0x60);
664 * Special big-R17 for short distance
667 sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW);
669 rt2500usb_bbp_write(rt2x00dev, 17, sens);
674 * Special mid-R17 for middle distance
677 sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH);
679 rt2500usb_bbp_write(rt2x00dev, 17, sens);
684 * Leave short or middle distance condition, restore r17
685 * to the dynamic tuning range.
687 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound);
688 vgc_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER);
692 up_bound = vgc_bound;
694 up_bound = vgc_bound - (-77 - rssi);
696 if (up_bound < low_bound)
697 up_bound = low_bound;
699 if (r17 > up_bound) {
700 rt2500usb_bbp_write(rt2x00dev, 17, up_bound);
701 rt2x00dev->link.vgc_level = up_bound;
702 } else if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) {
703 rt2500usb_bbp_write(rt2x00dev, 17, ++r17);
704 rt2x00dev->link.vgc_level = r17;
705 } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) {
706 rt2500usb_bbp_write(rt2x00dev, 17, --r17);
707 rt2x00dev->link.vgc_level = r17;
712 * Initialization functions.
714 static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
718 rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0x0001,
719 USB_MODE_TEST, REGISTER_TIMEOUT);
720 rt2x00usb_vendor_request_sw(rt2x00dev, USB_SINGLE_WRITE, 0x0308,
721 0x00f0, REGISTER_TIMEOUT);
723 rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®);
724 rt2x00_set_field16(®, TXRX_CSR2_DISABLE_RX, 1);
725 rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
727 rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x1111);
728 rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x1e11);
730 rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®);
731 rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 1);
732 rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 1);
733 rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 0);
734 rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
736 rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®);
737 rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 0);
738 rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 0);
739 rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 0);
740 rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
742 rt2500usb_register_read(rt2x00dev, TXRX_CSR5, ®);
743 rt2x00_set_field16(®, TXRX_CSR5_BBP_ID0, 13);
744 rt2x00_set_field16(®, TXRX_CSR5_BBP_ID0_VALID, 1);
745 rt2x00_set_field16(®, TXRX_CSR5_BBP_ID1, 12);
746 rt2x00_set_field16(®, TXRX_CSR5_BBP_ID1_VALID, 1);
747 rt2500usb_register_write(rt2x00dev, TXRX_CSR5, reg);
749 rt2500usb_register_read(rt2x00dev, TXRX_CSR6, ®);
750 rt2x00_set_field16(®, TXRX_CSR6_BBP_ID0, 10);
751 rt2x00_set_field16(®, TXRX_CSR6_BBP_ID0_VALID, 1);
752 rt2x00_set_field16(®, TXRX_CSR6_BBP_ID1, 11);
753 rt2x00_set_field16(®, TXRX_CSR6_BBP_ID1_VALID, 1);
754 rt2500usb_register_write(rt2x00dev, TXRX_CSR6, reg);
756 rt2500usb_register_read(rt2x00dev, TXRX_CSR7, ®);
757 rt2x00_set_field16(®, TXRX_CSR7_BBP_ID0, 7);
758 rt2x00_set_field16(®, TXRX_CSR7_BBP_ID0_VALID, 1);
759 rt2x00_set_field16(®, TXRX_CSR7_BBP_ID1, 6);
760 rt2x00_set_field16(®, TXRX_CSR7_BBP_ID1_VALID, 1);
761 rt2500usb_register_write(rt2x00dev, TXRX_CSR7, reg);
763 rt2500usb_register_read(rt2x00dev, TXRX_CSR8, ®);
764 rt2x00_set_field16(®, TXRX_CSR8_BBP_ID0, 5);
765 rt2x00_set_field16(®, TXRX_CSR8_BBP_ID0_VALID, 1);
766 rt2x00_set_field16(®, TXRX_CSR8_BBP_ID1, 0);
767 rt2x00_set_field16(®, TXRX_CSR8_BBP_ID1_VALID, 0);
768 rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg);
770 rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f);
771 rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d);
773 if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
776 rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®);
777 rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 0);
778 rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 0);
779 rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 1);
780 rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
782 if (rt2x00_get_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) {
783 rt2500usb_register_read(rt2x00dev, PHY_CSR2, ®);
788 rt2500usb_register_write(rt2x00dev, PHY_CSR2, reg);
790 rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0002);
791 rt2500usb_register_write(rt2x00dev, MAC_CSR22, 0x0053);
792 rt2500usb_register_write(rt2x00dev, MAC_CSR15, 0x01ee);
793 rt2500usb_register_write(rt2x00dev, MAC_CSR16, 0x0000);
795 rt2500usb_register_read(rt2x00dev, MAC_CSR8, ®);
796 rt2x00_set_field16(®, MAC_CSR8_MAX_FRAME_UNIT,
797 rt2x00dev->rx->data_size);
798 rt2500usb_register_write(rt2x00dev, MAC_CSR8, reg);
800 rt2500usb_register_read(rt2x00dev, TXRX_CSR0, ®);
801 rt2x00_set_field16(®, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
802 rt2x00_set_field16(®, TXRX_CSR0_KEY_ID, 0xff);
803 rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
805 rt2500usb_register_read(rt2x00dev, MAC_CSR18, ®);
806 rt2x00_set_field16(®, MAC_CSR18_DELAY_AFTER_BEACON, 90);
807 rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
809 rt2500usb_register_read(rt2x00dev, PHY_CSR4, ®);
810 rt2x00_set_field16(®, PHY_CSR4_LOW_RF_LE, 1);
811 rt2500usb_register_write(rt2x00dev, PHY_CSR4, reg);
813 rt2500usb_register_read(rt2x00dev, TXRX_CSR1, ®);
814 rt2x00_set_field16(®, TXRX_CSR1_AUTO_SEQUENCE, 1);
815 rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
820 static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev)
827 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
828 rt2500usb_bbp_read(rt2x00dev, 0, &value);
829 if ((value != 0xff) && (value != 0x00))
830 goto continue_csr_init;
831 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
832 udelay(REGISTER_BUSY_DELAY);
835 ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
839 rt2500usb_bbp_write(rt2x00dev, 3, 0x02);
840 rt2500usb_bbp_write(rt2x00dev, 4, 0x19);
841 rt2500usb_bbp_write(rt2x00dev, 14, 0x1c);
842 rt2500usb_bbp_write(rt2x00dev, 15, 0x30);
843 rt2500usb_bbp_write(rt2x00dev, 16, 0xac);
844 rt2500usb_bbp_write(rt2x00dev, 18, 0x18);
845 rt2500usb_bbp_write(rt2x00dev, 19, 0xff);
846 rt2500usb_bbp_write(rt2x00dev, 20, 0x1e);
847 rt2500usb_bbp_write(rt2x00dev, 21, 0x08);
848 rt2500usb_bbp_write(rt2x00dev, 22, 0x08);
849 rt2500usb_bbp_write(rt2x00dev, 23, 0x08);
850 rt2500usb_bbp_write(rt2x00dev, 24, 0x80);
851 rt2500usb_bbp_write(rt2x00dev, 25, 0x50);
852 rt2500usb_bbp_write(rt2x00dev, 26, 0x08);
853 rt2500usb_bbp_write(rt2x00dev, 27, 0x23);
854 rt2500usb_bbp_write(rt2x00dev, 30, 0x10);
855 rt2500usb_bbp_write(rt2x00dev, 31, 0x2b);
856 rt2500usb_bbp_write(rt2x00dev, 32, 0xb9);
857 rt2500usb_bbp_write(rt2x00dev, 34, 0x12);
858 rt2500usb_bbp_write(rt2x00dev, 35, 0x50);
859 rt2500usb_bbp_write(rt2x00dev, 39, 0xc4);
860 rt2500usb_bbp_write(rt2x00dev, 40, 0x02);
861 rt2500usb_bbp_write(rt2x00dev, 41, 0x60);
862 rt2500usb_bbp_write(rt2x00dev, 53, 0x10);
863 rt2500usb_bbp_write(rt2x00dev, 54, 0x18);
864 rt2500usb_bbp_write(rt2x00dev, 56, 0x08);
865 rt2500usb_bbp_write(rt2x00dev, 57, 0x10);
866 rt2500usb_bbp_write(rt2x00dev, 58, 0x08);
867 rt2500usb_bbp_write(rt2x00dev, 61, 0x60);
868 rt2500usb_bbp_write(rt2x00dev, 62, 0x10);
869 rt2500usb_bbp_write(rt2x00dev, 75, 0xff);
871 DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
872 for (i = 0; i < EEPROM_BBP_SIZE; i++) {
873 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
875 if (eeprom != 0xffff && eeprom != 0x0000) {
876 reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
877 value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
878 DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
880 rt2500usb_bbp_write(rt2x00dev, reg_id, value);
883 DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
889 * Device state switch handlers.
891 static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
892 enum dev_state state)
896 rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®);
897 rt2x00_set_field16(®, TXRX_CSR2_DISABLE_RX,
898 state == STATE_RADIO_RX_OFF);
899 rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
902 static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev)
905 * Initialize all registers.
907 if (rt2500usb_init_registers(rt2x00dev) ||
908 rt2500usb_init_bbp(rt2x00dev)) {
909 ERROR(rt2x00dev, "Register initialization failed.\n");
913 rt2x00usb_enable_radio(rt2x00dev);
918 rt2500usb_enable_led(rt2x00dev);
923 static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev)
928 rt2500usb_disable_led(rt2x00dev);
930 rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121);
931 rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121);
934 * Disable synchronisation.
936 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
938 rt2x00usb_disable_radio(rt2x00dev);
941 static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev,
942 enum dev_state state)
951 put_to_sleep = (state != STATE_AWAKE);
954 rt2x00_set_field16(®, MAC_CSR17_BBP_DESIRE_STATE, state);
955 rt2x00_set_field16(®, MAC_CSR17_RF_DESIRE_STATE, state);
956 rt2x00_set_field16(®, MAC_CSR17_PUT_TO_SLEEP, put_to_sleep);
957 rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
958 rt2x00_set_field16(®, MAC_CSR17_SET_STATE, 1);
959 rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
962 * Device is not guaranteed to be in the requested state yet.
963 * We must wait until the register indicates that the
964 * device has entered the correct state.
966 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
967 rt2500usb_register_read(rt2x00dev, MAC_CSR17, ®2);
968 bbp_state = rt2x00_get_field16(reg2, MAC_CSR17_BBP_CURR_STATE);
969 rf_state = rt2x00_get_field16(reg2, MAC_CSR17_RF_CURR_STATE);
970 if (bbp_state == state && rf_state == state)
972 rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
976 NOTICE(rt2x00dev, "Device failed to enter state %d, "
977 "current device state: bbp %d and rf %d.\n",
978 state, bbp_state, rf_state);
983 static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
984 enum dev_state state)
990 retval = rt2500usb_enable_radio(rt2x00dev);
992 case STATE_RADIO_OFF:
993 rt2500usb_disable_radio(rt2x00dev);
995 case STATE_RADIO_RX_ON:
996 case STATE_RADIO_RX_OFF:
997 rt2500usb_toggle_rx(rt2x00dev, state);
999 case STATE_DEEP_SLEEP:
1003 retval = rt2500usb_set_state(rt2x00dev, state);
1014 * TX descriptor initialization
1016 static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1017 struct data_desc *txd,
1018 struct txdata_entry_desc *desc,
1019 struct ieee80211_hdr *ieee80211hdr,
1020 unsigned int length,
1021 struct ieee80211_tx_control *control)
1026 * Start writing the descriptor words.
1028 rt2x00_desc_read(txd, 1, &word);
1029 rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
1030 rt2x00_set_field32(&word, TXD_W1_AIFS, desc->aifs);
1031 rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min);
1032 rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max);
1033 rt2x00_desc_write(txd, 1, word);
1035 rt2x00_desc_read(txd, 2, &word);
1036 rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal);
1037 rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service);
1038 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low);
1039 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high);
1040 rt2x00_desc_write(txd, 2, word);
1042 rt2x00_desc_read(txd, 0, &word);
1043 rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, control->retry_limit);
1044 rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1045 test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
1046 rt2x00_set_field32(&word, TXD_W0_ACK,
1047 !(control->flags & IEEE80211_TXCTL_NO_ACK));
1048 rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1049 test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
1050 rt2x00_set_field32(&word, TXD_W0_OFDM,
1051 test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags));
1052 rt2x00_set_field32(&word, TXD_W0_NEW_SEQ,
1053 !!(control->flags & IEEE80211_TXCTL_FIRST_FRAGMENT));
1054 rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
1055 rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length);
1056 rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE);
1057 rt2x00_desc_write(txd, 0, word);
1061 * TX data initialization
1063 static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1068 if (queue != IEEE80211_TX_QUEUE_BEACON)
1071 rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®);
1072 if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) {
1073 rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 1);
1075 * Beacon generation will fail initially.
1076 * To prevent this we need to register the TXRX_CSR19
1077 * register several times.
1079 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1080 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1081 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1082 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1083 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1088 * RX control handlers
1090 static void rt2500usb_fill_rxdone(struct data_entry *entry,
1091 struct rxdata_entry_desc *desc)
1093 struct urb *urb = entry->priv;
1094 struct data_desc *rxd = (struct data_desc *)(entry->skb->data +
1095 (urb->actual_length -
1096 entry->ring->desc_size));
1100 rt2x00_desc_read(rxd, 0, &word0);
1101 rt2x00_desc_read(rxd, 1, &word1);
1104 if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1105 desc->flags |= RX_FLAG_FAILED_FCS_CRC;
1106 if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
1107 desc->flags |= RX_FLAG_FAILED_PLCP_CRC;
1110 * Obtain the status about this packet.
1112 desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1113 desc->rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) -
1114 entry->ring->rt2x00dev->rssi_offset;
1115 desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
1116 desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1122 * Interrupt functions.
1124 static void rt2500usb_beacondone(struct urb *urb)
1126 struct data_entry *entry = (struct data_entry *)urb->context;
1127 struct data_ring *ring = entry->ring;
1129 if (!test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags))
1133 * Check if this was the guardian beacon,
1134 * if that was the case we need to send the real beacon now.
1135 * Otherwise we should free the sk_buffer, the device
1136 * should be doing the rest of the work now.
1138 if (ring->index == 1) {
1139 rt2x00_ring_index_done_inc(ring);
1140 entry = rt2x00_get_data_entry(ring);
1141 usb_submit_urb(entry->priv, GFP_ATOMIC);
1142 rt2x00_ring_index_inc(ring);
1143 } else if (ring->index_done == 1) {
1144 entry = rt2x00_get_data_entry_done(ring);
1146 dev_kfree_skb(entry->skb);
1149 rt2x00_ring_index_done_inc(ring);
1154 * Device probe functions.
1156 static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1161 rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
1164 * Start validation of the data that has been read.
1166 mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1167 if (!is_valid_ether_addr(mac)) {
1168 DECLARE_MAC_BUF(macbuf);
1170 random_ether_addr(mac);
1171 EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
1174 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1175 if (word == 0xffff) {
1176 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1177 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 0);
1178 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 0);
1179 rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, 0);
1180 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1181 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1182 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
1183 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1184 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1187 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1188 if (word == 0xffff) {
1189 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
1190 rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
1191 rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
1192 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1193 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1196 rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
1197 if (word == 0xffff) {
1198 rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
1199 DEFAULT_RSSI_OFFSET);
1200 rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
1201 EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
1204 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &word);
1205 if (word == 0xffff) {
1206 rt2x00_set_field16(&word, EEPROM_BBPTUNE_THRESHOLD, 45);
1207 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE, word);
1208 EEPROM(rt2x00dev, "BBPtune: 0x%04x\n", word);
1211 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &word);
1212 if (word == 0xffff) {
1213 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCUPPER, 0x40);
1214 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
1215 EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word);
1218 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word);
1219 if (word == 0xffff) {
1220 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_LOW, 0x48);
1221 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41);
1222 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word);
1223 EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word);
1226 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word);
1227 if (word == 0xffff) {
1228 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_LOW, 0x40);
1229 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_HIGH, 0x80);
1230 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R24, word);
1231 EEPROM(rt2x00dev, "BBPtune r24: 0x%04x\n", word);
1234 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &word);
1235 if (word == 0xffff) {
1236 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_LOW, 0x40);
1237 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_HIGH, 0x50);
1238 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R25, word);
1239 EEPROM(rt2x00dev, "BBPtune r25: 0x%04x\n", word);
1242 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &word);
1243 if (word == 0xffff) {
1244 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_LOW, 0x60);
1245 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_HIGH, 0x6d);
1246 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R61, word);
1247 EEPROM(rt2x00dev, "BBPtune r61: 0x%04x\n", word);
1253 static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
1260 * Read EEPROM word for configuration.
1262 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1265 * Identify RF chipset.
1267 value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1268 rt2500usb_register_read(rt2x00dev, MAC_CSR0, ®);
1269 rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
1271 if (rt2x00_rev(&rt2x00dev->chip, 0xffff0)) {
1272 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
1276 if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
1277 !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
1278 !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
1279 !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
1280 !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
1281 !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1282 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1287 * Identify default antenna configuration.
1289 rt2x00dev->hw->conf.antenna_sel_tx =
1290 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1291 rt2x00dev->hw->conf.antenna_sel_rx =
1292 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1295 * Store led mode, for correct led behaviour.
1297 rt2x00dev->led_mode =
1298 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1301 * Check if the BBP tuning should be disabled.
1303 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1304 if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
1305 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1308 * Read the RSSI <-> dBm offset information.
1310 rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
1311 rt2x00dev->rssi_offset =
1312 rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
1318 * RF value list for RF2522
1321 static const struct rf_channel rf_vals_bg_2522[] = {
1322 { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 },
1323 { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 },
1324 { 3, 0x00002050, 0x000c2002, 0x00000101, 0 },
1325 { 4, 0x00002050, 0x000c2016, 0x00000101, 0 },
1326 { 5, 0x00002050, 0x000c202a, 0x00000101, 0 },
1327 { 6, 0x00002050, 0x000c203e, 0x00000101, 0 },
1328 { 7, 0x00002050, 0x000c2052, 0x00000101, 0 },
1329 { 8, 0x00002050, 0x000c2066, 0x00000101, 0 },
1330 { 9, 0x00002050, 0x000c207a, 0x00000101, 0 },
1331 { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
1332 { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
1333 { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
1334 { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
1335 { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
1339 * RF value list for RF2523
1342 static const struct rf_channel rf_vals_bg_2523[] = {
1343 { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
1344 { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
1345 { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
1346 { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
1347 { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
1348 { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
1349 { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
1350 { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
1351 { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
1352 { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
1353 { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
1354 { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
1355 { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
1356 { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
1360 * RF value list for RF2524
1363 static const struct rf_channel rf_vals_bg_2524[] = {
1364 { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
1365 { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
1366 { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
1367 { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
1368 { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
1369 { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
1370 { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
1371 { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
1372 { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
1373 { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
1374 { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
1375 { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
1376 { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
1377 { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
1381 * RF value list for RF2525
1384 static const struct rf_channel rf_vals_bg_2525[] = {
1385 { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
1386 { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
1387 { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
1388 { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
1389 { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
1390 { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
1391 { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
1392 { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
1393 { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
1394 { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
1395 { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
1396 { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
1397 { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
1398 { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
1402 * RF value list for RF2525e
1405 static const struct rf_channel rf_vals_bg_2525e[] = {
1406 { 1, 0x00022010, 0x0000089a, 0x00060111, 0x00000e1b },
1407 { 2, 0x00022010, 0x0000089e, 0x00060111, 0x00000e07 },
1408 { 3, 0x00022010, 0x0000089e, 0x00060111, 0x00000e1b },
1409 { 4, 0x00022010, 0x000008a2, 0x00060111, 0x00000e07 },
1410 { 5, 0x00022010, 0x000008a2, 0x00060111, 0x00000e1b },
1411 { 6, 0x00022010, 0x000008a6, 0x00060111, 0x00000e07 },
1412 { 7, 0x00022010, 0x000008a6, 0x00060111, 0x00000e1b },
1413 { 8, 0x00022010, 0x000008aa, 0x00060111, 0x00000e07 },
1414 { 9, 0x00022010, 0x000008aa, 0x00060111, 0x00000e1b },
1415 { 10, 0x00022010, 0x000008ae, 0x00060111, 0x00000e07 },
1416 { 11, 0x00022010, 0x000008ae, 0x00060111, 0x00000e1b },
1417 { 12, 0x00022010, 0x000008b2, 0x00060111, 0x00000e07 },
1418 { 13, 0x00022010, 0x000008b2, 0x00060111, 0x00000e1b },
1419 { 14, 0x00022010, 0x000008b6, 0x00060111, 0x00000e23 },
1423 * RF value list for RF5222
1424 * Supports: 2.4 GHz & 5.2 GHz
1426 static const struct rf_channel rf_vals_5222[] = {
1427 { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
1428 { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
1429 { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
1430 { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
1431 { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
1432 { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
1433 { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
1434 { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
1435 { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
1436 { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
1437 { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
1438 { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
1439 { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
1440 { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
1442 /* 802.11 UNI / HyperLan 2 */
1443 { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
1444 { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
1445 { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
1446 { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
1447 { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
1448 { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
1449 { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
1450 { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
1452 /* 802.11 HyperLan 2 */
1453 { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
1454 { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
1455 { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
1456 { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
1457 { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
1458 { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
1459 { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
1460 { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
1461 { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
1462 { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
1465 { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
1466 { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
1467 { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
1468 { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
1469 { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
1472 static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1474 struct hw_mode_spec *spec = &rt2x00dev->spec;
1479 * Initialize all hw fields.
1481 rt2x00dev->hw->flags =
1482 IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
1483 IEEE80211_HW_RX_INCLUDES_FCS |
1484 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
1485 rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
1486 rt2x00dev->hw->max_signal = MAX_SIGNAL;
1487 rt2x00dev->hw->max_rssi = MAX_RX_SSI;
1488 rt2x00dev->hw->queues = 2;
1490 SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
1491 SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1492 rt2x00_eeprom_addr(rt2x00dev,
1493 EEPROM_MAC_ADDR_0));
1496 * Convert tx_power array in eeprom.
1498 txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1499 for (i = 0; i < 14; i++)
1500 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1503 * Initialize hw_mode information.
1505 spec->num_modes = 2;
1506 spec->num_rates = 12;
1507 spec->tx_power_a = NULL;
1508 spec->tx_power_bg = txpower;
1509 spec->tx_power_default = DEFAULT_TXPOWER;
1511 if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
1512 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
1513 spec->channels = rf_vals_bg_2522;
1514 } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
1515 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
1516 spec->channels = rf_vals_bg_2523;
1517 } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
1518 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
1519 spec->channels = rf_vals_bg_2524;
1520 } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
1521 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
1522 spec->channels = rf_vals_bg_2525;
1523 } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
1524 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
1525 spec->channels = rf_vals_bg_2525e;
1526 } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1527 spec->num_channels = ARRAY_SIZE(rf_vals_5222);
1528 spec->channels = rf_vals_5222;
1529 spec->num_modes = 3;
1533 static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
1538 * Allocate eeprom data.
1540 retval = rt2500usb_validate_eeprom(rt2x00dev);
1544 retval = rt2500usb_init_eeprom(rt2x00dev);
1549 * Initialize hw specifications.
1551 rt2500usb_probe_hw_mode(rt2x00dev);
1554 * This device requires the beacon ring
1556 __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags);
1559 * Set the rssi offset.
1561 rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1567 * IEEE80211 stack callback functions.
1569 static void rt2500usb_configure_filter(struct ieee80211_hw *hw,
1570 unsigned int changed_flags,
1571 unsigned int *total_flags,
1573 struct dev_addr_list *mc_list)
1575 struct rt2x00_dev *rt2x00dev = hw->priv;
1576 struct interface *intf = &rt2x00dev->interface;
1580 * Mask off any flags we are going to ignore from
1581 * the total_flags field.
1592 * Apply some rules to the filters:
1593 * - Some filters imply different filters to be set.
1594 * - Some things we can't filter out at all.
1595 * - Some filters are set based on interface type.
1598 *total_flags |= FIF_ALLMULTI;
1599 if (*total_flags & FIF_OTHER_BSS ||
1600 *total_flags & FIF_PROMISC_IN_BSS)
1601 *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
1602 if (is_interface_type(intf, IEEE80211_IF_TYPE_AP))
1603 *total_flags |= FIF_PROMISC_IN_BSS;
1606 * Check if there is any work left for us.
1608 if (intf->filter == *total_flags)
1610 intf->filter = *total_flags;
1613 * When in atomic context, reschedule and let rt2x00lib
1614 * call this function again.
1617 queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work);
1622 * Start configuration steps.
1623 * Note that the version error will always be dropped
1624 * and broadcast frames will always be accepted since
1625 * there is no filter for it at this time.
1627 rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®);
1628 rt2x00_set_field16(®, TXRX_CSR2_DROP_CRC,
1629 !(*total_flags & FIF_FCSFAIL));
1630 rt2x00_set_field16(®, TXRX_CSR2_DROP_PHYSICAL,
1631 !(*total_flags & FIF_PLCPFAIL));
1632 rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL,
1633 !(*total_flags & FIF_CONTROL));
1634 rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME,
1635 !(*total_flags & FIF_PROMISC_IN_BSS));
1636 rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS,
1637 !(*total_flags & FIF_PROMISC_IN_BSS));
1638 rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 1);
1639 rt2x00_set_field16(®, TXRX_CSR2_DROP_MULTICAST,
1640 !(*total_flags & FIF_ALLMULTI));
1641 rt2x00_set_field16(®, TXRX_CSR2_DROP_BROADCAST, 0);
1642 rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
1645 static int rt2500usb_beacon_update(struct ieee80211_hw *hw,
1646 struct sk_buff *skb,
1647 struct ieee80211_tx_control *control)
1649 struct rt2x00_dev *rt2x00dev = hw->priv;
1650 struct usb_device *usb_dev =
1651 interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
1652 struct data_ring *ring =
1653 rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
1654 struct data_entry *beacon;
1655 struct data_entry *guardian;
1659 * Just in case the ieee80211 doesn't set this,
1660 * but we need this queue set for the descriptor
1663 control->queue = IEEE80211_TX_QUEUE_BEACON;
1666 * Obtain 2 entries, one for the guardian byte,
1667 * the second for the actual beacon.
1669 guardian = rt2x00_get_data_entry(ring);
1670 rt2x00_ring_index_inc(ring);
1671 beacon = rt2x00_get_data_entry(ring);
1674 * First we create the beacon.
1676 skb_push(skb, ring->desc_size);
1677 rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data,
1678 (struct ieee80211_hdr *)(skb->data +
1680 skb->len - ring->desc_size, control);
1683 * Length passed to usb_fill_urb cannot be an odd number,
1684 * so add 1 byte to make it even.
1690 usb_fill_bulk_urb(beacon->priv, usb_dev,
1691 usb_sndbulkpipe(usb_dev, 1),
1692 skb->data, length, rt2500usb_beacondone, beacon);
1697 * Second we need to create the guardian byte.
1698 * We only need a single byte, so lets recycle
1699 * the 'flags' field we are not using for beacons.
1701 guardian->flags = 0;
1702 usb_fill_bulk_urb(guardian->priv, usb_dev,
1703 usb_sndbulkpipe(usb_dev, 1),
1704 &guardian->flags, 1, rt2500usb_beacondone, guardian);
1707 * Send out the guardian byte.
1709 usb_submit_urb(guardian->priv, GFP_ATOMIC);
1712 * Enable beacon generation.
1714 rt2500usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
1719 static const struct ieee80211_ops rt2500usb_mac80211_ops = {
1721 .start = rt2x00mac_start,
1722 .stop = rt2x00mac_stop,
1723 .add_interface = rt2x00mac_add_interface,
1724 .remove_interface = rt2x00mac_remove_interface,
1725 .config = rt2x00mac_config,
1726 .config_interface = rt2x00mac_config_interface,
1727 .configure_filter = rt2500usb_configure_filter,
1728 .get_stats = rt2x00mac_get_stats,
1729 .conf_tx = rt2x00mac_conf_tx,
1730 .get_tx_stats = rt2x00mac_get_tx_stats,
1731 .beacon_update = rt2500usb_beacon_update,
1734 static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
1735 .probe_hw = rt2500usb_probe_hw,
1736 .initialize = rt2x00usb_initialize,
1737 .uninitialize = rt2x00usb_uninitialize,
1738 .set_device_state = rt2500usb_set_device_state,
1739 .link_stats = rt2500usb_link_stats,
1740 .reset_tuner = rt2500usb_reset_tuner,
1741 .link_tuner = rt2500usb_link_tuner,
1742 .write_tx_desc = rt2500usb_write_tx_desc,
1743 .write_tx_data = rt2x00usb_write_tx_data,
1744 .kick_tx_queue = rt2500usb_kick_tx_queue,
1745 .fill_rxdone = rt2500usb_fill_rxdone,
1746 .config_mac_addr = rt2500usb_config_mac_addr,
1747 .config_bssid = rt2500usb_config_bssid,
1748 .config_type = rt2500usb_config_type,
1749 .config = rt2500usb_config,
1752 static const struct rt2x00_ops rt2500usb_ops = {
1754 .rxd_size = RXD_DESC_SIZE,
1755 .txd_size = TXD_DESC_SIZE,
1756 .eeprom_size = EEPROM_SIZE,
1758 .lib = &rt2500usb_rt2x00_ops,
1759 .hw = &rt2500usb_mac80211_ops,
1760 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1761 .debugfs = &rt2500usb_rt2x00debug,
1762 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1766 * rt2500usb module information.
1768 static struct usb_device_id rt2500usb_device_table[] = {
1770 { USB_DEVICE(0x0b05, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1771 { USB_DEVICE(0x0b05, 0x1707), USB_DEVICE_DATA(&rt2500usb_ops) },
1773 { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt2500usb_ops) },
1774 { USB_DEVICE(0x050d, 0x7051), USB_DEVICE_DATA(&rt2500usb_ops) },
1775 { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt2500usb_ops) },
1777 { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
1778 { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
1779 { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
1781 { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
1783 { USB_DEVICE(0x2001, 0x3c00), USB_DEVICE_DATA(&rt2500usb_ops) },
1785 { USB_DEVICE(0x1044, 0x8001), USB_DEVICE_DATA(&rt2500usb_ops) },
1786 { USB_DEVICE(0x1044, 0x8007), USB_DEVICE_DATA(&rt2500usb_ops) },
1788 { USB_DEVICE(0x06f8, 0xe000), USB_DEVICE_DATA(&rt2500usb_ops) },
1790 { USB_DEVICE(0x0411, 0x0066), USB_DEVICE_DATA(&rt2500usb_ops) },
1791 { USB_DEVICE(0x0411, 0x0067), USB_DEVICE_DATA(&rt2500usb_ops) },
1792 { USB_DEVICE(0x0411, 0x008b), USB_DEVICE_DATA(&rt2500usb_ops) },
1793 { USB_DEVICE(0x0411, 0x0097), USB_DEVICE_DATA(&rt2500usb_ops) },
1796 { USB_DEVICE(0x0db0, 0x6861), USB_DEVICE_DATA(&rt2500usb_ops) },
1797 { USB_DEVICE(0x0db0, 0x6865), USB_DEVICE_DATA(&rt2500usb_ops) },
1798 { USB_DEVICE(0x0db0, 0x6869), USB_DEVICE_DATA(&rt2500usb_ops) },
1800 { USB_DEVICE(0x148f, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1801 { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
1802 { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
1803 { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1805 { USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
1807 { USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
1809 { USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
1811 { USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1813 { USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
1817 MODULE_AUTHOR(DRV_PROJECT);
1818 MODULE_VERSION(DRV_VERSION);
1819 MODULE_DESCRIPTION("Ralink RT2500 USB Wireless LAN driver.");
1820 MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards");
1821 MODULE_DEVICE_TABLE(usb, rt2500usb_device_table);
1822 MODULE_LICENSE("GPL");
1824 static struct usb_driver rt2500usb_driver = {
1826 .id_table = rt2500usb_device_table,
1827 .probe = rt2x00usb_probe,
1828 .disconnect = rt2x00usb_disconnect,
1829 .suspend = rt2x00usb_suspend,
1830 .resume = rt2x00usb_resume,
1833 static int __init rt2500usb_init(void)
1835 return usb_register(&rt2500usb_driver);
1838 static void __exit rt2500usb_exit(void)
1840 usb_deregister(&rt2500usb_driver);
1843 module_init(rt2500usb_init);
1844 module_exit(rt2500usb_exit);