err.no Git - linux-2.6/blob - drivers/net/wireless/rt2x00/rt2500usb.c

   1 /*
   2         Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt2500usb
  23         Abstract: rt2500usb device specific routines.
  24         Supported chipsets: RT2570.
  25  */
  26
  27 #include <linux/delay.h>
  28 #include <linux/etherdevice.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/usb.h>
  33
  34 #include "rt2x00.h"
  35 #include "rt2x00usb.h"
  36 #include "rt2500usb.h"
  37
  38 /*
  39  * Register access.
  40  * All access to the CSR registers will go through the methods
  41  * rt2500usb_register_read and rt2500usb_register_write.
  42  * BBP and RF register require indirect register access,
  43  * and use the CSR registers BBPCSR and RFCSR to achieve this.
  44  * These indirect registers work with busy bits,
  45  * and we will try maximal REGISTER_BUSY_COUNT times to access
  46  * the register while taking a REGISTER_BUSY_DELAY us delay
  47  * between each attampt. When the busy bit is still set at that time,
  48  * the access attempt is considered to have failed,
  49  * and we will print an error.
  50  * If the usb_cache_mutex is already held then the _lock variants must
  51  * be used instead.
  52  */
  53 static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
  54                                            const unsigned int offset,
  55                                            u16 *value)
  56 {
  57         __le16 reg;
  58         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
  59                                       USB_VENDOR_REQUEST_IN, offset,
  60                                       &reg, sizeof(u16), REGISTER_TIMEOUT);
  61         *value = le16_to_cpu(reg);
  62 }
  63
  64 static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
  65                                                 const unsigned int offset,
  66                                                 u16 *value)
  67 {
  68         __le16 reg;
  69         rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
  70                                        USB_VENDOR_REQUEST_IN, offset,
  71                                        &reg, sizeof(u16), REGISTER_TIMEOUT);
  72         *value = le16_to_cpu(reg);
  73 }
  74
  75 static inline void rt2500usb_register_multiread(struct rt2x00_dev *rt2x00dev,
  76                                                 const unsigned int offset,
  77                                                 void *value, const u16 length)
  78 {
  79         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
  80                                       USB_VENDOR_REQUEST_IN, offset,
  81                                       value, length,
  82                                       REGISTER_TIMEOUT16(length));
  83 }
  84
  85 static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
  86                                             const unsigned int offset,
  87                                             u16 value)
  88 {
  89         __le16 reg = cpu_to_le16(value);
  90         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
  91                                       USB_VENDOR_REQUEST_OUT, offset,
  92                                       &reg, sizeof(u16), REGISTER_TIMEOUT);
  93 }
  94
  95 static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
  96                                                  const unsigned int offset,
  97                                                  u16 value)
  98 {
  99         __le16 reg = cpu_to_le16(value);
 100         rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
 101                                        USB_VENDOR_REQUEST_OUT, offset,
 102                                        &reg, sizeof(u16), REGISTER_TIMEOUT);
 103 }
 104
 105 static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
 106                                                  const unsigned int offset,
 107                                                  void *value, const u16 length)
 108 {
 109         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
 110                                       USB_VENDOR_REQUEST_OUT, offset,
 111                                       value, length,
 112                                       REGISTER_TIMEOUT16(length));
 113 }
 114
 115 static u16 rt2500usb_bbp_check(struct rt2x00_dev *rt2x00dev)
 116 {
 117         u16 reg;
 118         unsigned int i;
 119
 120         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 121                 rt2500usb_register_read_lock(rt2x00dev, PHY_CSR8, &reg);
 122                 if (!rt2x00_get_field16(reg, PHY_CSR8_BUSY))
 123                         break;
 124                 udelay(REGISTER_BUSY_DELAY);
 125         }
 126
 127         return reg;
 128 }
 129
 130 static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 131                                 const unsigned int word, const u8 value)
 132 {
 133         u16 reg;
 134
 135         mutex_lock(&rt2x00dev->usb_cache_mutex);
 136
 137         /*
 138          * Wait until the BBP becomes ready.
 139          */
 140         reg = rt2500usb_bbp_check(rt2x00dev);
 141         if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
 142                 ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
 143                 mutex_unlock(&rt2x00dev->usb_cache_mutex);
 144                 return;
 145         }
 146
 147         /*
 148          * Write the data into the BBP.
 149          */
 150         reg = 0;
 151         rt2x00_set_field16(&reg, PHY_CSR7_DATA, value);
 152         rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
 153         rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 0);
 154
 155         rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
 156
 157         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 158 }
 159
 160 static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 161                                const unsigned int word, u8 *value)
 162 {
 163         u16 reg;
 164
 165         mutex_lock(&rt2x00dev->usb_cache_mutex);
 166
 167         /*
 168          * Wait until the BBP becomes ready.
 169          */
 170         reg = rt2500usb_bbp_check(rt2x00dev);
 171         if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
 172                 ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
 173                 return;
 174         }
 175
 176         /*
 177          * Write the request into the BBP.
 178          */
 179         reg = 0;
 180         rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
 181         rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 1);
 182
 183         rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
 184
 185         /*
 186          * Wait until the BBP becomes ready.
 187          */
 188         reg = rt2500usb_bbp_check(rt2x00dev);
 189         if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
 190                 ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
 191                 *value = 0xff;
 192                 mutex_unlock(&rt2x00dev->usb_cache_mutex);
 193                 return;
 194         }
 195
 196         rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, &reg);
 197         *value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
 198
 199         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 200 }
 201
 202 static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev,
 203                                const unsigned int word, const u32 value)
 204 {
 205         u16 reg;
 206         unsigned int i;
 207
 208         if (!word)
 209                 return;
 210
 211         mutex_lock(&rt2x00dev->usb_cache_mutex);
 212
 213         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 214                 rt2500usb_register_read_lock(rt2x00dev, PHY_CSR10, &reg);
 215                 if (!rt2x00_get_field16(reg, PHY_CSR10_RF_BUSY))
 216                         goto rf_write;
 217                 udelay(REGISTER_BUSY_DELAY);
 218         }
 219
 220         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 221         ERROR(rt2x00dev, "PHY_CSR10 register busy. Write failed.\n");
 222         return;
 223
 224 rf_write:
 225         reg = 0;
 226         rt2x00_set_field16(&reg, PHY_CSR9_RF_VALUE, value);
 227         rt2500usb_register_write_lock(rt2x00dev, PHY_CSR9, reg);
 228
 229         reg = 0;
 230         rt2x00_set_field16(&reg, PHY_CSR10_RF_VALUE, value >> 16);
 231         rt2x00_set_field16(&reg, PHY_CSR10_RF_NUMBER_OF_BITS, 20);
 232         rt2x00_set_field16(&reg, PHY_CSR10_RF_IF_SELECT, 0);
 233         rt2x00_set_field16(&reg, PHY_CSR10_RF_BUSY, 1);
 234
 235         rt2500usb_register_write_lock(rt2x00dev, PHY_CSR10, reg);
 236         rt2x00_rf_write(rt2x00dev, word, value);
 237
 238         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 239 }
 240
 241 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 242 #define CSR_OFFSET(__word)      ( CSR_REG_BASE + ((__word) * sizeof(u16)) )
 243
 244 static void rt2500usb_read_csr(struct rt2x00_dev *rt2x00dev,
 245                                const unsigned int word, u32 *data)
 246 {
 247         rt2500usb_register_read(rt2x00dev, CSR_OFFSET(word), (u16 *) data);
 248 }
 249
 250 static void rt2500usb_write_csr(struct rt2x00_dev *rt2x00dev,
 251                                 const unsigned int word, u32 data)
 252 {
 253         rt2500usb_register_write(rt2x00dev, CSR_OFFSET(word), data);
 254 }
 255
 256 static const struct rt2x00debug rt2500usb_rt2x00debug = {
 257         .owner  = THIS_MODULE,
 258         .csr    = {
 259                 .read           = rt2500usb_read_csr,
 260                 .write          = rt2500usb_write_csr,
 261                 .word_size      = sizeof(u16),
 262                 .word_count     = CSR_REG_SIZE / sizeof(u16),
 263         },
 264         .eeprom = {
 265                 .read           = rt2x00_eeprom_read,
 266                 .write          = rt2x00_eeprom_write,
 267                 .word_size      = sizeof(u16),
 268                 .word_count     = EEPROM_SIZE / sizeof(u16),
 269         },
 270         .bbp    = {
 271                 .read           = rt2500usb_bbp_read,
 272                 .write          = rt2500usb_bbp_write,
 273                 .word_size      = sizeof(u8),
 274                 .word_count     = BBP_SIZE / sizeof(u8),
 275         },
 276         .rf     = {
 277                 .read           = rt2x00_rf_read,
 278                 .write          = rt2500usb_rf_write,
 279                 .word_size      = sizeof(u32),
 280                 .word_count     = RF_SIZE / sizeof(u32),
 281         },
 282 };
 283 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 284
 285 #ifdef CONFIG_RT2500USB_LEDS
 286 static void rt2500usb_brightness_set(struct led_classdev *led_cdev,
 287                                      enum led_brightness brightness)
 288 {
 289         struct rt2x00_led *led =
 290             container_of(led_cdev, struct rt2x00_led, led_dev);
 291         unsigned int enabled = brightness != LED_OFF;
 292         u16 reg;
 293
 294         rt2500usb_register_read(led->rt2x00dev, MAC_CSR20, &reg);
 295
 296         if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC)
 297                 rt2x00_set_field16(&reg, MAC_CSR20_LINK, enabled);
 298         else if (led->type == LED_TYPE_ACTIVITY)
 299                 rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, enabled);
 300
 301         rt2500usb_register_write(led->rt2x00dev, MAC_CSR20, reg);
 302 }
 303
 304 static int rt2500usb_blink_set(struct led_classdev *led_cdev,
 305                                unsigned long *delay_on,
 306                                unsigned long *delay_off)
 307 {
 308         struct rt2x00_led *led =
 309             container_of(led_cdev, struct rt2x00_led, led_dev);
 310         u16 reg;
 311
 312         rt2500usb_register_read(led->rt2x00dev, MAC_CSR21, &reg);
 313         rt2x00_set_field16(&reg, MAC_CSR21_ON_PERIOD, *delay_on);
 314         rt2x00_set_field16(&reg, MAC_CSR21_OFF_PERIOD, *delay_off);
 315         rt2500usb_register_write(led->rt2x00dev, MAC_CSR21, reg);
 316
 317         return 0;
 318 }
 319 #endif /* CONFIG_RT2500USB_LEDS */
 320
 321 /*
 322  * Configuration handlers.
 323  */
 324 static void rt2500usb_config_filter(struct rt2x00_dev *rt2x00dev,
 325                                     const unsigned int filter_flags)
 326 {
 327         u16 reg;
 328
 329         /*
 330          * Start configuration steps.
 331          * Note that the version error will always be dropped
 332          * and broadcast frames will always be accepted since
 333          * there is no filter for it at this time.
 334          */
 335         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 336         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CRC,
 337                            !(filter_flags & FIF_FCSFAIL));
 338         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_PHYSICAL,
 339                            !(filter_flags & FIF_PLCPFAIL));
 340         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CONTROL,
 341                            !(filter_flags & FIF_CONTROL));
 342         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_NOT_TO_ME,
 343                            !(filter_flags & FIF_PROMISC_IN_BSS));
 344         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_TODS,
 345                            !(filter_flags & FIF_PROMISC_IN_BSS) &&
 346                            !rt2x00dev->intf_ap_count);
 347         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_VERSION_ERROR, 1);
 348         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_MULTICAST,
 349                            !(filter_flags & FIF_ALLMULTI));
 350         rt2x00_set_field16(&reg, TXRX_CSR2_DROP_BROADCAST, 0);
 351         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 352 }
 353
 354 static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev,
 355                                   struct rt2x00_intf *intf,
 356                                   struct rt2x00intf_conf *conf,
 357                                   const unsigned int flags)
 358 {
 359         unsigned int bcn_preload;
 360         u16 reg;
 361
 362         if (flags & CONFIG_UPDATE_TYPE) {
 363                 /*
 364                  * Enable beacon config
 365                  */
 366                 bcn_preload = PREAMBLE + get_duration(IEEE80211_HEADER, 20);
 367                 rt2500usb_register_read(rt2x00dev, TXRX_CSR20, &reg);
 368                 rt2x00_set_field16(&reg, TXRX_CSR20_OFFSET, bcn_preload >> 6);
 369                 rt2x00_set_field16(&reg, TXRX_CSR20_BCN_EXPECT_WINDOW,
 370                                    2 * (conf->type != IEEE80211_IF_TYPE_STA));
 371                 rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg);
 372
 373                 /*
 374                  * Enable synchronisation.
 375                  */
 376                 rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
 377                 rt2x00_set_field16(&reg, TXRX_CSR18_OFFSET, 0);
 378                 rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
 379
 380                 rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
 381                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
 382                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, conf->sync);
 383                 rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
 384                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
 385         }
 386
 387         if (flags & CONFIG_UPDATE_MAC)
 388                 rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, conf->mac,
 389                                               (3 * sizeof(__le16)));
 390
 391         if (flags & CONFIG_UPDATE_BSSID)
 392                 rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, conf->bssid,
 393                                               (3 * sizeof(__le16)));
 394 }
 395
 396 static void rt2500usb_config_erp(struct rt2x00_dev *rt2x00dev,
 397                                  struct rt2x00lib_erp *erp)
 398 {
 399         u16 reg;
 400
 401         rt2500usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
 402         rt2x00_set_field16(&reg, TXRX_CSR1_ACK_TIMEOUT, erp->ack_timeout);
 403         rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
 404
 405         rt2500usb_register_read(rt2x00dev, TXRX_CSR10, &reg);
 406         rt2x00_set_field16(&reg, TXRX_CSR10_AUTORESPOND_PREAMBLE,
 407                            !!erp->short_preamble);
 408         rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg);
 409 }
 410
 411 static void rt2500usb_config_phymode(struct rt2x00_dev *rt2x00dev,
 412                                      const int basic_rate_mask)
 413 {
 414         rt2500usb_register_write(rt2x00dev, TXRX_CSR11, basic_rate_mask);
 415 }
 416
 417 static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev,
 418                                      struct rf_channel *rf, const int txpower)
 419 {
 420         /*
 421          * Set TXpower.
 422          */
 423         rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 424
 425         /*
 426          * For RT2525E we should first set the channel to half band higher.
 427          */
 428         if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
 429                 static const u32 vals[] = {
 430                         0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
 431                         0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba,
 432                         0x000008ba, 0x000008be, 0x000008b7, 0x00000902,
 433                         0x00000902, 0x00000906
 434                 };
 435
 436                 rt2500usb_rf_write(rt2x00dev, 2, vals[rf->channel - 1]);
 437                 if (rf->rf4)
 438                         rt2500usb_rf_write(rt2x00dev, 4, rf->rf4);
 439         }
 440
 441         rt2500usb_rf_write(rt2x00dev, 1, rf->rf1);
 442         rt2500usb_rf_write(rt2x00dev, 2, rf->rf2);
 443         rt2500usb_rf_write(rt2x00dev, 3, rf->rf3);
 444         if (rf->rf4)
 445                 rt2500usb_rf_write(rt2x00dev, 4, rf->rf4);
 446 }
 447
 448 static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev,
 449                                      const int txpower)
 450 {
 451         u32 rf3;
 452
 453         rt2x00_rf_read(rt2x00dev, 3, &rf3);
 454         rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 455         rt2500usb_rf_write(rt2x00dev, 3, rf3);
 456 }
 457
 458 static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev,
 459                                      struct antenna_setup *ant)
 460 {
 461         u8 r2;
 462         u8 r14;
 463         u16 csr5;
 464         u16 csr6;
 465
 466         /*
 467          * We should never come here because rt2x00lib is supposed
 468          * to catch this and send us the correct antenna explicitely.
 469          */
 470         BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
 471                ant->tx == ANTENNA_SW_DIVERSITY);
 472
 473         rt2500usb_bbp_read(rt2x00dev, 2, &r2);
 474         rt2500usb_bbp_read(rt2x00dev, 14, &r14);
 475         rt2500usb_register_read(rt2x00dev, PHY_CSR5, &csr5);
 476         rt2500usb_register_read(rt2x00dev, PHY_CSR6, &csr6);
 477
 478         /*
 479          * Configure the TX antenna.
 480          */
 481         switch (ant->tx) {
 482         case ANTENNA_HW_DIVERSITY:
 483                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 1);
 484                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 1);
 485                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 1);
 486                 break;
 487         case ANTENNA_A:
 488                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
 489                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0);
 490                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0);
 491                 break;
 492         case ANTENNA_B:
 493         default:
 494                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
 495                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2);
 496                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 2);
 497                 break;
 498         }
 499
 500         /*
 501          * Configure the RX antenna.
 502          */
 503         switch (ant->rx) {
 504         case ANTENNA_HW_DIVERSITY:
 505                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 1);
 506                 break;
 507         case ANTENNA_A:
 508                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
 509                 break;
 510         case ANTENNA_B:
 511         default:
 512                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
 513                 break;
 514         }
 515
 516         /*
 517          * RT2525E and RT5222 need to flip TX I/Q
 518          */
 519         if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
 520             rt2x00_rf(&rt2x00dev->chip, RF5222)) {
 521                 rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
 522                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1);
 523                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1);
 524
 525                 /*
 526                  * RT2525E does not need RX I/Q Flip.
 527                  */
 528                 if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
 529                         rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
 530         } else {
 531                 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0);
 532                 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 0);
 533         }
 534
 535         rt2500usb_bbp_write(rt2x00dev, 2, r2);
 536         rt2500usb_bbp_write(rt2x00dev, 14, r14);
 537         rt2500usb_register_write(rt2x00dev, PHY_CSR5, csr5);
 538         rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6);
 539 }
 540
 541 static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev,
 542                                       struct rt2x00lib_conf *libconf)
 543 {
 544         u16 reg;
 545
 546         rt2500usb_register_write(rt2x00dev, MAC_CSR10, libconf->slot_time);
 547         rt2500usb_register_write(rt2x00dev, MAC_CSR11, libconf->sifs);
 548         rt2500usb_register_write(rt2x00dev, MAC_CSR12, libconf->eifs);
 549
 550         rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
 551         rt2x00_set_field16(&reg, TXRX_CSR18_INTERVAL,
 552                            libconf->conf->beacon_int * 4);
 553         rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
 554 }
 555
 556 static void rt2500usb_config(struct rt2x00_dev *rt2x00dev,
 557                              struct rt2x00lib_conf *libconf,
 558                              const unsigned int flags)
 559 {
 560         if (flags & CONFIG_UPDATE_PHYMODE)
 561                 rt2500usb_config_phymode(rt2x00dev, libconf->basic_rates);
 562         if (flags & CONFIG_UPDATE_CHANNEL)
 563                 rt2500usb_config_channel(rt2x00dev, &libconf->rf,
 564                                          libconf->conf->power_level);
 565         if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
 566                 rt2500usb_config_txpower(rt2x00dev,
 567                                          libconf->conf->power_level);
 568         if (flags & CONFIG_UPDATE_ANTENNA)
 569                 rt2500usb_config_antenna(rt2x00dev, &libconf->ant);
 570         if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
 571                 rt2500usb_config_duration(rt2x00dev, libconf);
 572 }
 573
 574 /*
 575  * Link tuning
 576  */
 577 static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev,
 578                                  struct link_qual *qual)
 579 {
 580         u16 reg;
 581
 582         /*
 583          * Update FCS error count from register.
 584          */
 585         rt2500usb_register_read(rt2x00dev, STA_CSR0, &reg);
 586         qual->rx_failed = rt2x00_get_field16(reg, STA_CSR0_FCS_ERROR);
 587
 588         /*
 589          * Update False CCA count from register.
 590          */
 591         rt2500usb_register_read(rt2x00dev, STA_CSR3, &reg);
 592         qual->false_cca = rt2x00_get_field16(reg, STA_CSR3_FALSE_CCA_ERROR);
 593 }
 594
 595 static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
 596 {
 597         u16 eeprom;
 598         u16 value;
 599
 600         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &eeprom);
 601         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R24_LOW);
 602         rt2500usb_bbp_write(rt2x00dev, 24, value);
 603
 604         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &eeprom);
 605         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R25_LOW);
 606         rt2500usb_bbp_write(rt2x00dev, 25, value);
 607
 608         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &eeprom);
 609         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R61_LOW);
 610         rt2500usb_bbp_write(rt2x00dev, 61, value);
 611
 612         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &eeprom);
 613         value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_VGCUPPER);
 614         rt2500usb_bbp_write(rt2x00dev, 17, value);
 615
 616         rt2x00dev->link.vgc_level = value;
 617 }
 618
 619 static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev)
 620 {
 621         int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
 622         u16 bbp_thresh;
 623         u16 vgc_bound;
 624         u16 sens;
 625         u16 r24;
 626         u16 r25;
 627         u16 r61;
 628         u16 r17_sens;
 629         u8 r17;
 630         u8 up_bound;
 631         u8 low_bound;
 632
 633         /*
 634          * Read current r17 value, as well as the sensitivity values
 635          * for the r17 register.
 636          */
 637         rt2500usb_bbp_read(rt2x00dev, 17, &r17);
 638         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens);
 639
 640         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound);
 641         up_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER);
 642         low_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCLOWER);
 643
 644         /*
 645          * If we are not associated, we should go straight to the
 646          * dynamic CCA tuning.
 647          */
 648         if (!rt2x00dev->intf_associated)
 649                 goto dynamic_cca_tune;
 650
 651         /*
 652          * Determine the BBP tuning threshold and correctly
 653          * set BBP 24, 25 and 61.
 654          */
 655         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh);
 656         bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD);
 657
 658         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24);
 659         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25);
 660         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61);
 661
 662         if ((rssi + bbp_thresh) > 0) {
 663                 r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH);
 664                 r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH);
 665                 r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH);
 666         } else {
 667                 r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW);
 668                 r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW);
 669                 r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW);
 670         }
 671
 672         rt2500usb_bbp_write(rt2x00dev, 24, r24);
 673         rt2500usb_bbp_write(rt2x00dev, 25, r25);
 674         rt2500usb_bbp_write(rt2x00dev, 61, r61);
 675
 676         /*
 677          * A too low RSSI will cause too much false CCA which will
 678          * then corrupt the R17 tuning. To remidy this the tuning should
 679          * be stopped (While making sure the R17 value will not exceed limits)
 680          */
 681         if (rssi >= -40) {
 682                 if (r17 != 0x60)
 683                         rt2500usb_bbp_write(rt2x00dev, 17, 0x60);
 684                 return;
 685         }
 686
 687         /*
 688          * Special big-R17 for short distance
 689          */
 690         if (rssi >= -58) {
 691                 sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW);
 692                 if (r17 != sens)
 693                         rt2500usb_bbp_write(rt2x00dev, 17, sens);
 694                 return;
 695         }
 696
 697         /*
 698          * Special mid-R17 for middle distance
 699          */
 700         if (rssi >= -74) {
 701                 sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH);
 702                 if (r17 != sens)
 703                         rt2500usb_bbp_write(rt2x00dev, 17, sens);
 704                 return;
 705         }
 706
 707         /*
 708          * Leave short or middle distance condition, restore r17
 709          * to the dynamic tuning range.
 710          */
 711         low_bound = 0x32;
 712         if (rssi < -77)
 713                 up_bound -= (-77 - rssi);
 714
 715         if (up_bound < low_bound)
 716                 up_bound = low_bound;
 717
 718         if (r17 > up_bound) {
 719                 rt2500usb_bbp_write(rt2x00dev, 17, up_bound);
 720                 rt2x00dev->link.vgc_level = up_bound;
 721                 return;
 722         }
 723
 724 dynamic_cca_tune:
 725
 726         /*
 727          * R17 is inside the dynamic tuning range,
 728          * start tuning the link based on the false cca counter.
 729          */
 730         if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) {
 731                 rt2500usb_bbp_write(rt2x00dev, 17, ++r17);
 732                 rt2x00dev->link.vgc_level = r17;
 733         } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) {
 734                 rt2500usb_bbp_write(rt2x00dev, 17, --r17);
 735                 rt2x00dev->link.vgc_level = r17;
 736         }
 737 }
 738
 739 /*
 740  * Initialization functions.
 741  */
 742 static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
 743 {
 744         u16 reg;
 745
 746         rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0x0001,
 747                                     USB_MODE_TEST, REGISTER_TIMEOUT);
 748         rt2x00usb_vendor_request_sw(rt2x00dev, USB_SINGLE_WRITE, 0x0308,
 749                                     0x00f0, REGISTER_TIMEOUT);
 750
 751         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 752         rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX, 1);
 753         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 754
 755         rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x1111);
 756         rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x1e11);
 757
 758         rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
 759         rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 1);
 760         rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 1);
 761         rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
 762         rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 763
 764         rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
 765         rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
 766         rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
 767         rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
 768         rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 769
 770         rt2500usb_register_read(rt2x00dev, TXRX_CSR5, &reg);
 771         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0, 13);
 772         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0_VALID, 1);
 773         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1, 12);
 774         rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1_VALID, 1);
 775         rt2500usb_register_write(rt2x00dev, TXRX_CSR5, reg);
 776
 777         rt2500usb_register_read(rt2x00dev, TXRX_CSR6, &reg);
 778         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0, 10);
 779         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0_VALID, 1);
 780         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1, 11);
 781         rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1_VALID, 1);
 782         rt2500usb_register_write(rt2x00dev, TXRX_CSR6, reg);
 783
 784         rt2500usb_register_read(rt2x00dev, TXRX_CSR7, &reg);
 785         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0, 7);
 786         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0_VALID, 1);
 787         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1, 6);
 788         rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1_VALID, 1);
 789         rt2500usb_register_write(rt2x00dev, TXRX_CSR7, reg);
 790
 791         rt2500usb_register_read(rt2x00dev, TXRX_CSR8, &reg);
 792         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0, 5);
 793         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0_VALID, 1);
 794         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1, 0);
 795         rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1_VALID, 0);
 796         rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg);
 797
 798         rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f);
 799         rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d);
 800
 801         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
 802                 return -EBUSY;
 803
 804         rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
 805         rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
 806         rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
 807         rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 1);
 808         rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 809
 810         if (rt2x00_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) {
 811                 rt2500usb_register_read(rt2x00dev, PHY_CSR2, &reg);
 812                 rt2x00_set_field16(&reg, PHY_CSR2_LNA, 0);
 813         } else {
 814                 reg = 0;
 815                 rt2x00_set_field16(&reg, PHY_CSR2_LNA, 1);
 816                 rt2x00_set_field16(&reg, PHY_CSR2_LNA_MODE, 3);
 817         }
 818         rt2500usb_register_write(rt2x00dev, PHY_CSR2, reg);
 819
 820         rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0002);
 821         rt2500usb_register_write(rt2x00dev, MAC_CSR22, 0x0053);
 822         rt2500usb_register_write(rt2x00dev, MAC_CSR15, 0x01ee);
 823         rt2500usb_register_write(rt2x00dev, MAC_CSR16, 0x0000);
 824
 825         rt2500usb_register_read(rt2x00dev, MAC_CSR8, &reg);
 826         rt2x00_set_field16(&reg, MAC_CSR8_MAX_FRAME_UNIT,
 827                            rt2x00dev->rx->data_size);
 828         rt2500usb_register_write(rt2x00dev, MAC_CSR8, reg);
 829
 830         rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 831         rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
 832         rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, 0xff);
 833         rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 834
 835         rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
 836         rt2x00_set_field16(&reg, MAC_CSR18_DELAY_AFTER_BEACON, 90);
 837         rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
 838
 839         rt2500usb_register_read(rt2x00dev, PHY_CSR4, &reg);
 840         rt2x00_set_field16(&reg, PHY_CSR4_LOW_RF_LE, 1);
 841         rt2500usb_register_write(rt2x00dev, PHY_CSR4, reg);
 842
 843         rt2500usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
 844         rt2x00_set_field16(&reg, TXRX_CSR1_AUTO_SEQUENCE, 1);
 845         rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
 846
 847         return 0;
 848 }
 849
 850 static int rt2500usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
 851 {
 852         unsigned int i;
 853         u8 value;
 854
 855         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 856                 rt2500usb_bbp_read(rt2x00dev, 0, &value);
 857                 if ((value != 0xff) && (value != 0x00))
 858                         return 0;
 859                 udelay(REGISTER_BUSY_DELAY);
 860         }
 861
 862         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
 863         return -EACCES;
 864 }
 865
 866 static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev)
 867 {
 868         unsigned int i;
 869         u16 eeprom;
 870         u8 value;
 871         u8 reg_id;
 872
 873         if (unlikely(rt2500usb_wait_bbp_ready(rt2x00dev)))
 874                 return -EACCES;
 875
 876         rt2500usb_bbp_write(rt2x00dev, 3, 0x02);
 877         rt2500usb_bbp_write(rt2x00dev, 4, 0x19);
 878         rt2500usb_bbp_write(rt2x00dev, 14, 0x1c);
 879         rt2500usb_bbp_write(rt2x00dev, 15, 0x30);
 880         rt2500usb_bbp_write(rt2x00dev, 16, 0xac);
 881         rt2500usb_bbp_write(rt2x00dev, 18, 0x18);
 882         rt2500usb_bbp_write(rt2x00dev, 19, 0xff);
 883         rt2500usb_bbp_write(rt2x00dev, 20, 0x1e);
 884         rt2500usb_bbp_write(rt2x00dev, 21, 0x08);
 885         rt2500usb_bbp_write(rt2x00dev, 22, 0x08);
 886         rt2500usb_bbp_write(rt2x00dev, 23, 0x08);
 887         rt2500usb_bbp_write(rt2x00dev, 24, 0x80);
 888         rt2500usb_bbp_write(rt2x00dev, 25, 0x50);
 889         rt2500usb_bbp_write(rt2x00dev, 26, 0x08);
 890         rt2500usb_bbp_write(rt2x00dev, 27, 0x23);
 891         rt2500usb_bbp_write(rt2x00dev, 30, 0x10);
 892         rt2500usb_bbp_write(rt2x00dev, 31, 0x2b);
 893         rt2500usb_bbp_write(rt2x00dev, 32, 0xb9);
 894         rt2500usb_bbp_write(rt2x00dev, 34, 0x12);
 895         rt2500usb_bbp_write(rt2x00dev, 35, 0x50);
 896         rt2500usb_bbp_write(rt2x00dev, 39, 0xc4);
 897         rt2500usb_bbp_write(rt2x00dev, 40, 0x02);
 898         rt2500usb_bbp_write(rt2x00dev, 41, 0x60);
 899         rt2500usb_bbp_write(rt2x00dev, 53, 0x10);
 900         rt2500usb_bbp_write(rt2x00dev, 54, 0x18);
 901         rt2500usb_bbp_write(rt2x00dev, 56, 0x08);
 902         rt2500usb_bbp_write(rt2x00dev, 57, 0x10);
 903         rt2500usb_bbp_write(rt2x00dev, 58, 0x08);
 904         rt2500usb_bbp_write(rt2x00dev, 61, 0x60);
 905         rt2500usb_bbp_write(rt2x00dev, 62, 0x10);
 906         rt2500usb_bbp_write(rt2x00dev, 75, 0xff);
 907
 908         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
 909                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
 910
 911                 if (eeprom != 0xffff && eeprom != 0x0000) {
 912                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
 913                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
 914                         rt2500usb_bbp_write(rt2x00dev, reg_id, value);
 915                 }
 916         }
 917
 918         return 0;
 919 }
 920
 921 /*
 922  * Device state switch handlers.
 923  */
 924 static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
 925                                 enum dev_state state)
 926 {
 927         u16 reg;
 928
 929         rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 930         rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX,
 931                            (state == STATE_RADIO_RX_OFF) ||
 932                            (state == STATE_RADIO_RX_OFF_LINK));
 933         rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 934 }
 935
 936 static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 937 {
 938         /*
 939          * Initialize all registers.
 940          */
 941         if (unlikely(rt2500usb_init_registers(rt2x00dev) ||
 942                      rt2500usb_init_bbp(rt2x00dev)))
 943                 return -EIO;
 944
 945         return 0;
 946 }
 947
 948 static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 949 {
 950         rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121);
 951         rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121);
 952
 953         /*
 954          * Disable synchronisation.
 955          */
 956         rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
 957
 958         rt2x00usb_disable_radio(rt2x00dev);
 959 }
 960
 961 static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev,
 962                                enum dev_state state)
 963 {
 964         u16 reg;
 965         u16 reg2;
 966         unsigned int i;
 967         char put_to_sleep;
 968         char bbp_state;
 969         char rf_state;
 970
 971         put_to_sleep = (state != STATE_AWAKE);
 972
 973         reg = 0;
 974         rt2x00_set_field16(&reg, MAC_CSR17_BBP_DESIRE_STATE, state);
 975         rt2x00_set_field16(&reg, MAC_CSR17_RF_DESIRE_STATE, state);
 976         rt2x00_set_field16(&reg, MAC_CSR17_PUT_TO_SLEEP, put_to_sleep);
 977         rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
 978         rt2x00_set_field16(&reg, MAC_CSR17_SET_STATE, 1);
 979         rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
 980
 981         /*
 982          * Device is not guaranteed to be in the requested state yet.
 983          * We must wait until the register indicates that the
 984          * device has entered the correct state.
 985          */
 986         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 987                 rt2500usb_register_read(rt2x00dev, MAC_CSR17, &reg2);
 988                 bbp_state = rt2x00_get_field16(reg2, MAC_CSR17_BBP_CURR_STATE);
 989                 rf_state = rt2x00_get_field16(reg2, MAC_CSR17_RF_CURR_STATE);
 990                 if (bbp_state == state && rf_state == state)
 991                         return 0;
 992                 rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
 993                 msleep(30);
 994         }
 995
 996         return -EBUSY;
 997 }
 998
 999 static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
1000                                       enum dev_state state)
1001 {
1002         int retval = 0;
1003
1004         switch (state) {
1005         case STATE_RADIO_ON:
1006                 retval = rt2500usb_enable_radio(rt2x00dev);
1007                 break;
1008         case STATE_RADIO_OFF:
1009                 rt2500usb_disable_radio(rt2x00dev);
1010                 break;
1011         case STATE_RADIO_RX_ON:
1012         case STATE_RADIO_RX_ON_LINK:
1013         case STATE_RADIO_RX_OFF:
1014         case STATE_RADIO_RX_OFF_LINK:
1015                 rt2500usb_toggle_rx(rt2x00dev, state);
1016                 break;
1017         case STATE_RADIO_IRQ_ON:
1018         case STATE_RADIO_IRQ_OFF:
1019                 /* No support, but no error either */
1020                 break;
1021         case STATE_DEEP_SLEEP:
1022         case STATE_SLEEP:
1023         case STATE_STANDBY:
1024         case STATE_AWAKE:
1025                 retval = rt2500usb_set_state(rt2x00dev, state);
1026                 break;
1027         default:
1028                 retval = -ENOTSUPP;
1029                 break;
1030         }
1031
1032         if (unlikely(retval))
1033                 ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
1034                       state, retval);
1035
1036         return retval;
1037 }
1038
1039 /*
1040  * TX descriptor initialization
1041  */
1042 static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1043                                     struct sk_buff *skb,
1044                                     struct txentry_desc *txdesc)
1045 {
1046         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
1047         __le32 *txd = skbdesc->desc;
1048         u32 word;
1049
1050         /*
1051          * Start writing the descriptor words.
1052          */
1053         rt2x00_desc_read(txd, 1, &word);
1054         rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
1055         rt2x00_set_field32(&word, TXD_W1_AIFS, txdesc->aifs);
1056         rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
1057         rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
1058         rt2x00_desc_write(txd, 1, word);
1059
1060         rt2x00_desc_read(txd, 2, &word);
1061         rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal);
1062         rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service);
1063         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low);
1064         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
1065         rt2x00_desc_write(txd, 2, word);
1066
1067         rt2x00_desc_read(txd, 0, &word);
1068         rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, txdesc->retry_limit);
1069         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1070                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
1071         rt2x00_set_field32(&word, TXD_W0_ACK,
1072                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
1073         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1074                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
1075         rt2x00_set_field32(&word, TXD_W0_OFDM,
1076                            test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags));
1077         rt2x00_set_field32(&word, TXD_W0_NEW_SEQ,
1078                            test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
1079         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
1080         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len);
1081         rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE);
1082         rt2x00_desc_write(txd, 0, word);
1083 }
1084
1085 static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
1086                                      struct sk_buff *skb)
1087 {
1088         int length;
1089
1090         /*
1091          * The length _must_ be a multiple of 2,
1092          * but it must _not_ be a multiple of the USB packet size.
1093          */
1094         length = roundup(skb->len, 2);
1095         length += (2 * !(length % rt2x00dev->usb_maxpacket));
1096
1097         return length;
1098 }
1099
1100 /*
1101  * TX data initialization
1102  */
1103 static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1104                                     const enum data_queue_qid queue)
1105 {
1106         u16 reg;
1107
1108         if (queue != QID_BEACON)
1109                 return;
1110
1111         rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
1112         if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) {
1113                 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
1114                 rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
1115                 rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 1);
1116                 /*
1117                  * Beacon generation will fail initially.
1118                  * To prevent this we need to register the TXRX_CSR19
1119                  * register several times.
1120                  */
1121                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1122                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1123                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1124                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1125                 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1126         }
1127 }
1128
1129 /*
1130  * RX control handlers
1131  */
1132 static void rt2500usb_fill_rxdone(struct queue_entry *entry,
1133                                   struct rxdone_entry_desc *rxdesc)
1134 {
1135         struct queue_entry_priv_usb *entry_priv = entry->priv_data;
1136         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1137         __le32 *rxd =
1138             (__le32 *)(entry->skb->data +
1139                        (entry_priv->urb->actual_length -
1140                         entry->queue->desc_size));
1141         u32 word0;
1142         u32 word1;
1143
1144         /*
1145          * Copy descriptor to the skb->cb array, this has 2 benefits:
1146          * 1) Each descriptor word is 4 byte aligned.
1147          * 2) Descriptor is safe  from moving of frame data in rt2x00usb.
1148          */
1149         skbdesc->desc_len =
1150             min_t(u16, entry->queue->desc_size, sizeof(entry->skb->cb));
1151         memcpy(entry->skb->cb, rxd, skbdesc->desc_len);
1152         skbdesc->desc = entry->skb->cb;
1153         rxd = (__le32 *)skbdesc->desc;
1154
1155         /*
1156          * It is now safe to read the descriptor on all architectures.
1157          */
1158         rt2x00_desc_read(rxd, 0, &word0);
1159         rt2x00_desc_read(rxd, 1, &word1);
1160
1161         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1162                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
1163         if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
1164                 rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
1165
1166         /*
1167          * Obtain the status about this packet.
1168          * When frame was received with an OFDM bitrate,
1169          * the signal is the PLCP value. If it was received with
1170          * a CCK bitrate the signal is the rate in 100kbit/s.
1171          */
1172         rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1173         rxdesc->rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) -
1174             entry->queue->rt2x00dev->rssi_offset;
1175         rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1176
1177         if (rt2x00_get_field32(word0, RXD_W0_OFDM))
1178                 rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
1179         if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
1180                 rxdesc->dev_flags |= RXDONE_MY_BSS;
1181
1182         /*
1183          * Adjust the skb memory window to the frame boundaries.
1184          */
1185         skb_trim(entry->skb, rxdesc->size);
1186         skbdesc->data = entry->skb->data;
1187         skbdesc->data_len = rxdesc->size;
1188 }
1189
1190 /*
1191  * Interrupt functions.
1192  */
1193 static void rt2500usb_beacondone(struct urb *urb)
1194 {
1195         struct queue_entry *entry = (struct queue_entry *)urb->context;
1196         struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
1197
1198         if (!test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags))
1199                 return;
1200
1201         /*
1202          * Check if this was the guardian beacon,
1203          * if that was the case we need to send the real beacon now.
1204          * Otherwise we should free the sk_buffer, the device
1205          * should be doing the rest of the work now.
1206          */
1207         if (bcn_priv->guardian_urb == urb) {
1208                 usb_submit_urb(bcn_priv->urb, GFP_ATOMIC);
1209         } else if (bcn_priv->urb == urb) {
1210                 dev_kfree_skb(entry->skb);
1211                 entry->skb = NULL;
1212         }
1213 }
1214
1215 /*
1216  * Device probe functions.
1217  */
1218 static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1219 {
1220         u16 word;
1221         u8 *mac;
1222         u8 bbp;
1223
1224         rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
1225
1226         /*
1227          * Start validation of the data that has been read.
1228          */
1229         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1230         if (!is_valid_ether_addr(mac)) {
1231                 DECLARE_MAC_BUF(macbuf);
1232
1233                 random_ether_addr(mac);
1234                 EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
1235         }
1236
1237         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1238         if (word == 0xffff) {
1239                 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1240                 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
1241                                    ANTENNA_SW_DIVERSITY);
1242                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
1243                                    ANTENNA_SW_DIVERSITY);
1244                 rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE,
1245                                    LED_MODE_DEFAULT);
1246                 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1247                 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1248                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
1249                 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1250                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1251         }
1252
1253         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1254         if (word == 0xffff) {
1255                 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
1256                 rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
1257                 rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
1258                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1259                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1260         }
1261
1262         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
1263         if (word == 0xffff) {
1264                 rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
1265                                    DEFAULT_RSSI_OFFSET);
1266                 rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
1267                 EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
1268         }
1269
1270         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &word);
1271         if (word == 0xffff) {
1272                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_THRESHOLD, 45);
1273                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE, word);
1274                 EEPROM(rt2x00dev, "BBPtune: 0x%04x\n", word);
1275         }
1276
1277         /*
1278          * Switch lower vgc bound to current BBP R17 value,
1279          * lower the value a bit for better quality.
1280          */
1281         rt2500usb_bbp_read(rt2x00dev, 17, &bbp);
1282         bbp -= 6;
1283
1284         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &word);
1285         if (word == 0xffff) {
1286                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCUPPER, 0x40);
1287                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
1288                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
1289                 EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word);
1290         }
1291
1292         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word);
1293         if (word == 0xffff) {
1294                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_LOW, 0x48);
1295                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41);
1296                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word);
1297                 EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word);
1298         } else {
1299                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
1300                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
1301         }
1302
1303         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word);
1304         if (word == 0xffff) {
1305                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_LOW, 0x40);
1306                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_HIGH, 0x80);
1307                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R24, word);
1308                 EEPROM(rt2x00dev, "BBPtune r24: 0x%04x\n", word);
1309         }
1310
1311         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &word);
1312         if (word == 0xffff) {
1313                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_LOW, 0x40);
1314                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_HIGH, 0x50);
1315                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R25, word);
1316                 EEPROM(rt2x00dev, "BBPtune r25: 0x%04x\n", word);
1317         }
1318
1319         rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &word);
1320         if (word == 0xffff) {
1321                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_LOW, 0x60);
1322                 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_HIGH, 0x6d);
1323                 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R61, word);
1324                 EEPROM(rt2x00dev, "BBPtune r61: 0x%04x\n", word);
1325         }
1326
1327         return 0;
1328 }
1329
1330 static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
1331 {
1332         u16 reg;
1333         u16 value;
1334         u16 eeprom;
1335
1336         /*
1337          * Read EEPROM word for configuration.
1338          */
1339         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1340
1341         /*
1342          * Identify RF chipset.
1343          */
1344         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1345         rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
1346         rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
1347
1348         if (!rt2x00_check_rev(&rt2x00dev->chip, 0)) {
1349                 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
1350                 return -ENODEV;
1351         }
1352
1353         if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
1354             !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
1355             !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
1356             !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
1357             !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
1358             !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1359                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1360                 return -ENODEV;
1361         }
1362
1363         /*
1364          * Identify default antenna configuration.
1365          */
1366         rt2x00dev->default_ant.tx =
1367             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1368         rt2x00dev->default_ant.rx =
1369             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1370
1371         /*
1372          * When the eeprom indicates SW_DIVERSITY use HW_DIVERSITY instead.
1373          * I am not 100% sure about this, but the legacy drivers do not
1374          * indicate antenna swapping in software is required when
1375          * diversity is enabled.
1376          */
1377         if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
1378                 rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY;
1379         if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
1380                 rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY;
1381
1382         /*
1383          * Store led mode, for correct led behaviour.
1384          */
1385 #ifdef CONFIG_RT2500USB_LEDS
1386         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1387
1388         rt2x00dev->led_radio.rt2x00dev = rt2x00dev;
1389         rt2x00dev->led_radio.type = LED_TYPE_RADIO;
1390         rt2x00dev->led_radio.led_dev.brightness_set =
1391             rt2500usb_brightness_set;
1392         rt2x00dev->led_radio.led_dev.blink_set =
1393             rt2500usb_blink_set;
1394         rt2x00dev->led_radio.flags = LED_INITIALIZED;
1395
1396         if (value == LED_MODE_TXRX_ACTIVITY) {
1397                 rt2x00dev->led_qual.rt2x00dev = rt2x00dev;
1398                 rt2x00dev->led_qual.type = LED_TYPE_ACTIVITY;
1399                 rt2x00dev->led_qual.led_dev.brightness_set =
1400                     rt2500usb_brightness_set;
1401                 rt2x00dev->led_qual.led_dev.blink_set =
1402                     rt2500usb_blink_set;
1403                 rt2x00dev->led_qual.flags = LED_INITIALIZED;
1404         }
1405 #endif /* CONFIG_RT2500USB_LEDS */
1406
1407         /*
1408          * Check if the BBP tuning should be disabled.
1409          */
1410         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1411         if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
1412                 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1413
1414         /*
1415          * Read the RSSI <-> dBm offset information.
1416          */
1417         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
1418         rt2x00dev->rssi_offset =
1419             rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
1420
1421         return 0;
1422 }
1423
1424 /*
1425  * RF value list for RF2522
1426  * Supports: 2.4 GHz
1427  */
1428 static const struct rf_channel rf_vals_bg_2522[] = {
1429         { 1,  0x00002050, 0x000c1fda, 0x00000101, 0 },
1430         { 2,  0x00002050, 0x000c1fee, 0x00000101, 0 },
1431         { 3,  0x00002050, 0x000c2002, 0x00000101, 0 },
1432         { 4,  0x00002050, 0x000c2016, 0x00000101, 0 },
1433         { 5,  0x00002050, 0x000c202a, 0x00000101, 0 },
1434         { 6,  0x00002050, 0x000c203e, 0x00000101, 0 },
1435         { 7,  0x00002050, 0x000c2052, 0x00000101, 0 },
1436         { 8,  0x00002050, 0x000c2066, 0x00000101, 0 },
1437         { 9,  0x00002050, 0x000c207a, 0x00000101, 0 },
1438         { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
1439         { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
1440         { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
1441         { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
1442         { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
1443 };
1444
1445 /*
1446  * RF value list for RF2523
1447  * Supports: 2.4 GHz
1448  */
1449 static const struct rf_channel rf_vals_bg_2523[] = {
1450         { 1,  0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
1451         { 2,  0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
1452         { 3,  0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
1453         { 4,  0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
1454         { 5,  0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
1455         { 6,  0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
1456         { 7,  0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
1457         { 8,  0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
1458         { 9,  0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
1459         { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
1460         { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
1461         { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
1462         { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
1463         { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
1464 };
1465
1466 /*
1467  * RF value list for RF2524
1468  * Supports: 2.4 GHz
1469  */
1470 static const struct rf_channel rf_vals_bg_2524[] = {
1471         { 1,  0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
1472         { 2,  0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
1473         { 3,  0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
1474         { 4,  0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
1475         { 5,  0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
1476         { 6,  0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
1477         { 7,  0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
1478         { 8,  0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
1479         { 9,  0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
1480         { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
1481         { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
1482         { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
1483         { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
1484         { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
1485 };
1486
1487 /*
1488  * RF value list for RF2525
1489  * Supports: 2.4 GHz
1490  */
1491 static const struct rf_channel rf_vals_bg_2525[] = {
1492         { 1,  0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
1493         { 2,  0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
1494         { 3,  0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
1495         { 4,  0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
1496         { 5,  0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
1497         { 6,  0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
1498         { 7,  0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
1499         { 8,  0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
1500         { 9,  0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
1501         { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
1502         { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
1503         { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
1504         { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
1505         { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
1506 };
1507
1508 /*
1509  * RF value list for RF2525e
1510  * Supports: 2.4 GHz
1511  */
1512 static const struct rf_channel rf_vals_bg_2525e[] = {
1513         { 1,  0x00022010, 0x0000089a, 0x00060111, 0x00000e1b },
1514         { 2,  0x00022010, 0x0000089e, 0x00060111, 0x00000e07 },
1515         { 3,  0x00022010, 0x0000089e, 0x00060111, 0x00000e1b },
1516         { 4,  0x00022010, 0x000008a2, 0x00060111, 0x00000e07 },
1517         { 5,  0x00022010, 0x000008a2, 0x00060111, 0x00000e1b },
1518         { 6,  0x00022010, 0x000008a6, 0x00060111, 0x00000e07 },
1519         { 7,  0x00022010, 0x000008a6, 0x00060111, 0x00000e1b },
1520         { 8,  0x00022010, 0x000008aa, 0x00060111, 0x00000e07 },
1521         { 9,  0x00022010, 0x000008aa, 0x00060111, 0x00000e1b },
1522         { 10, 0x00022010, 0x000008ae, 0x00060111, 0x00000e07 },
1523         { 11, 0x00022010, 0x000008ae, 0x00060111, 0x00000e1b },
1524         { 12, 0x00022010, 0x000008b2, 0x00060111, 0x00000e07 },
1525         { 13, 0x00022010, 0x000008b2, 0x00060111, 0x00000e1b },
1526         { 14, 0x00022010, 0x000008b6, 0x00060111, 0x00000e23 },
1527 };
1528
1529 /*
1530  * RF value list for RF5222
1531  * Supports: 2.4 GHz & 5.2 GHz
1532  */
1533 static const struct rf_channel rf_vals_5222[] = {
1534         { 1,  0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
1535         { 2,  0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
1536         { 3,  0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
1537         { 4,  0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
1538         { 5,  0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
1539         { 6,  0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
1540         { 7,  0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
1541         { 8,  0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
1542         { 9,  0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
1543         { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
1544         { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
1545         { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
1546         { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
1547         { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
1548
1549         /* 802.11 UNI / HyperLan 2 */
1550         { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
1551         { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
1552         { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
1553         { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
1554         { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
1555         { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
1556         { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
1557         { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
1558
1559         /* 802.11 HyperLan 2 */
1560         { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
1561         { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
1562         { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
1563         { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
1564         { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
1565         { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
1566         { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
1567         { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
1568         { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
1569         { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
1570
1571         /* 802.11 UNII */
1572         { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
1573         { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
1574         { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
1575         { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
1576         { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
1577 };
1578
1579 static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1580 {
1581         struct hw_mode_spec *spec = &rt2x00dev->spec;
1582         u8 *txpower;
1583         unsigned int i;
1584
1585         /*
1586          * Initialize all hw fields.
1587          */
1588         rt2x00dev->hw->flags =
1589             IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
1590             IEEE80211_HW_RX_INCLUDES_FCS |
1591             IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1592             IEEE80211_HW_SIGNAL_DBM;
1593
1594         rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
1595
1596         SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
1597         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1598                                 rt2x00_eeprom_addr(rt2x00dev,
1599                                                    EEPROM_MAC_ADDR_0));
1600
1601         /*
1602          * Convert tx_power array in eeprom.
1603          */
1604         txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1605         for (i = 0; i < 14; i++)
1606                 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1607
1608         /*
1609          * Initialize hw_mode information.
1610          */
1611         spec->supported_bands = SUPPORT_BAND_2GHZ;
1612         spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
1613         spec->tx_power_a = NULL;
1614         spec->tx_power_bg = txpower;
1615         spec->tx_power_default = DEFAULT_TXPOWER;
1616
1617         if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
1618                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
1619                 spec->channels = rf_vals_bg_2522;
1620         } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
1621                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
1622                 spec->channels = rf_vals_bg_2523;
1623         } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
1624                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
1625                 spec->channels = rf_vals_bg_2524;
1626         } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
1627                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
1628                 spec->channels = rf_vals_bg_2525;
1629         } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
1630                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
1631                 spec->channels = rf_vals_bg_2525e;
1632         } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1633                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
1634                 spec->num_channels = ARRAY_SIZE(rf_vals_5222);
1635                 spec->channels = rf_vals_5222;
1636         }
1637 }
1638
1639 static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
1640 {
1641         int retval;
1642
1643         /*
1644          * Allocate eeprom data.
1645          */
1646         retval = rt2500usb_validate_eeprom(rt2x00dev);
1647         if (retval)
1648                 return retval;
1649
1650         retval = rt2500usb_init_eeprom(rt2x00dev);
1651         if (retval)
1652                 return retval;
1653
1654         /*
1655          * Initialize hw specifications.
1656          */
1657         rt2500usb_probe_hw_mode(rt2x00dev);
1658
1659         /*
1660          * This device requires the atim queue
1661          */
1662         __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
1663         __set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
1664         __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
1665
1666         /*
1667          * Set the rssi offset.
1668          */
1669         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1670
1671         return 0;
1672 }
1673
1674 /*
1675  * IEEE80211 stack callback functions.
1676  */
1677 static int rt2500usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
1678 {
1679         struct rt2x00_dev *rt2x00dev = hw->priv;
1680         struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
1681         struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
1682         struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
1683         struct queue_entry_priv_usb_bcn *bcn_priv;
1684         struct skb_frame_desc *skbdesc;
1685         struct txentry_desc txdesc;
1686         int pipe = usb_sndbulkpipe(usb_dev, 1);
1687         int length;
1688         u16 reg;
1689
1690         if (unlikely(!intf->beacon))
1691                 return -ENOBUFS;
1692
1693         bcn_priv = intf->beacon->priv_data;
1694
1695         /*
1696          * Copy all TX descriptor information into txdesc,
1697          * after that we are free to use the skb->cb array
1698          * for our information.
1699          */
1700         intf->beacon->skb = skb;
1701         rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc);
1702
1703         /*
1704          * Add the descriptor in front of the skb.
1705          */
1706         skb_push(skb, intf->beacon->queue->desc_size);
1707         memset(skb->data, 0, intf->beacon->queue->desc_size);
1708
1709         /*
1710          * Fill in skb descriptor
1711          */
1712         skbdesc = get_skb_frame_desc(skb);
1713         memset(skbdesc, 0, sizeof(*skbdesc));
1714         skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
1715         skbdesc->data = skb->data + intf->beacon->queue->desc_size;
1716         skbdesc->data_len = skb->len - intf->beacon->queue->desc_size;
1717         skbdesc->desc = skb->data;
1718         skbdesc->desc_len = intf->beacon->queue->desc_size;
1719         skbdesc->entry = intf->beacon;
1720
1721         /*
1722          * Disable beaconing while we are reloading the beacon data,
1723          * otherwise we might be sending out invalid data.
1724          */
1725         rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
1726         rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 0);
1727         rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 0);
1728         rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
1729         rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1730
1731         rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
1732
1733         /*
1734          * USB devices cannot blindly pass the skb->len as the
1735          * length of the data to usb_fill_bulk_urb. Pass the skb
1736          * to the driver to determine what the length should be.
1737          */
1738         length = rt2500usb_get_tx_data_len(rt2x00dev, skb);
1739
1740         usb_fill_bulk_urb(bcn_priv->urb, usb_dev, pipe,
1741                           skb->data, length, rt2500usb_beacondone,
1742                           intf->beacon);
1743
1744         /*
1745          * Second we need to create the guardian byte.
1746          * We only need a single byte, so lets recycle
1747          * the 'flags' field we are not using for beacons.
1748          */
1749         bcn_priv->guardian_data = 0;
1750         usb_fill_bulk_urb(bcn_priv->guardian_urb, usb_dev, pipe,
1751                           &bcn_priv->guardian_data, 1, rt2500usb_beacondone,
1752                           intf->beacon);
1753
1754         /*
1755          * Send out the guardian byte.
1756          */
1757         usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC);
1758
1759         /*
1760          * Enable beacon generation.
1761          */
1762         rt2500usb_kick_tx_queue(rt2x00dev, QID_BEACON);
1763
1764         return 0;
1765 }
1766
1767 static const struct ieee80211_ops rt2500usb_mac80211_ops = {
1768         .tx                     = rt2x00mac_tx,
1769         .start                  = rt2x00mac_start,
1770         .stop                   = rt2x00mac_stop,
1771         .add_interface          = rt2x00mac_add_interface,
1772         .remove_interface       = rt2x00mac_remove_interface,
1773         .config                 = rt2x00mac_config,
1774         .config_interface       = rt2x00mac_config_interface,
1775         .configure_filter       = rt2x00mac_configure_filter,
1776         .get_stats              = rt2x00mac_get_stats,
1777         .bss_info_changed       = rt2x00mac_bss_info_changed,
1778         .conf_tx                = rt2x00mac_conf_tx,
1779         .get_tx_stats           = rt2x00mac_get_tx_stats,
1780         .beacon_update          = rt2500usb_beacon_update,
1781 };
1782
1783 static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
1784         .probe_hw               = rt2500usb_probe_hw,
1785         .initialize             = rt2x00usb_initialize,
1786         .uninitialize           = rt2x00usb_uninitialize,
1787         .init_rxentry           = rt2x00usb_init_rxentry,
1788         .init_txentry           = rt2x00usb_init_txentry,
1789         .set_device_state       = rt2500usb_set_device_state,
1790         .link_stats             = rt2500usb_link_stats,
1791         .reset_tuner            = rt2500usb_reset_tuner,
1792         .link_tuner             = rt2500usb_link_tuner,
1793         .write_tx_desc          = rt2500usb_write_tx_desc,
1794         .write_tx_data          = rt2x00usb_write_tx_data,
1795         .get_tx_data_len        = rt2500usb_get_tx_data_len,
1796         .kick_tx_queue          = rt2500usb_kick_tx_queue,
1797         .fill_rxdone            = rt2500usb_fill_rxdone,
1798         .config_filter          = rt2500usb_config_filter,
1799         .config_intf            = rt2500usb_config_intf,
1800         .config_erp             = rt2500usb_config_erp,
1801         .config                 = rt2500usb_config,
1802 };
1803
1804 static const struct data_queue_desc rt2500usb_queue_rx = {
1805         .entry_num              = RX_ENTRIES,
1806         .data_size              = DATA_FRAME_SIZE,
1807         .desc_size              = RXD_DESC_SIZE,
1808         .priv_size              = sizeof(struct queue_entry_priv_usb),
1809 };
1810
1811 static const struct data_queue_desc rt2500usb_queue_tx = {
1812         .entry_num              = TX_ENTRIES,
1813         .data_size              = DATA_FRAME_SIZE,
1814         .desc_size              = TXD_DESC_SIZE,
1815         .priv_size              = sizeof(struct queue_entry_priv_usb),
1816 };
1817
1818 static const struct data_queue_desc rt2500usb_queue_bcn = {
1819         .entry_num              = BEACON_ENTRIES,
1820         .data_size              = MGMT_FRAME_SIZE,
1821         .desc_size              = TXD_DESC_SIZE,
1822         .priv_size              = sizeof(struct queue_entry_priv_usb_bcn),
1823 };
1824
1825 static const struct data_queue_desc rt2500usb_queue_atim = {
1826         .entry_num              = ATIM_ENTRIES,
1827         .data_size              = DATA_FRAME_SIZE,
1828         .desc_size              = TXD_DESC_SIZE,
1829         .priv_size              = sizeof(struct queue_entry_priv_usb),
1830 };
1831
1832 static const struct rt2x00_ops rt2500usb_ops = {
1833         .name           = KBUILD_MODNAME,
1834         .max_sta_intf   = 1,
1835         .max_ap_intf    = 1,
1836         .eeprom_size    = EEPROM_SIZE,
1837         .rf_size        = RF_SIZE,
1838         .tx_queues      = NUM_TX_QUEUES,
1839         .rx             = &rt2500usb_queue_rx,
1840         .tx             = &rt2500usb_queue_tx,
1841         .bcn            = &rt2500usb_queue_bcn,
1842         .atim           = &rt2500usb_queue_atim,
1843         .lib            = &rt2500usb_rt2x00_ops,
1844         .hw             = &rt2500usb_mac80211_ops,
1845 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1846         .debugfs        = &rt2500usb_rt2x00debug,
1847 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1848 };
1849
1850 /*
1851  * rt2500usb module information.
1852  */
1853 static struct usb_device_id rt2500usb_device_table[] = {
1854         /* ASUS */
1855         { USB_DEVICE(0x0b05, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1856         { USB_DEVICE(0x0b05, 0x1707), USB_DEVICE_DATA(&rt2500usb_ops) },
1857         /* Belkin */
1858         { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt2500usb_ops) },
1859         { USB_DEVICE(0x050d, 0x7051), USB_DEVICE_DATA(&rt2500usb_ops) },
1860         { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt2500usb_ops) },
1861         /* Cisco Systems */
1862         { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
1863         { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
1864         { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
1865         /* Conceptronic */
1866         { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
1867         /* D-LINK */
1868         { USB_DEVICE(0x2001, 0x3c00), USB_DEVICE_DATA(&rt2500usb_ops) },
1869         /* Gigabyte */
1870         { USB_DEVICE(0x1044, 0x8001), USB_DEVICE_DATA(&rt2500usb_ops) },
1871         { USB_DEVICE(0x1044, 0x8007), USB_DEVICE_DATA(&rt2500usb_ops) },
1872         /* Hercules */
1873         { USB_DEVICE(0x06f8, 0xe000), USB_DEVICE_DATA(&rt2500usb_ops) },
1874         /* Melco */
1875         { USB_DEVICE(0x0411, 0x005e), USB_DEVICE_DATA(&rt2500usb_ops) },
1876         { USB_DEVICE(0x0411, 0x0066), USB_DEVICE_DATA(&rt2500usb_ops) },
1877         { USB_DEVICE(0x0411, 0x0067), USB_DEVICE_DATA(&rt2500usb_ops) },
1878         { USB_DEVICE(0x0411, 0x008b), USB_DEVICE_DATA(&rt2500usb_ops) },
1879         { USB_DEVICE(0x0411, 0x0097), USB_DEVICE_DATA(&rt2500usb_ops) },
1880         /* MSI */
1881         { USB_DEVICE(0x0db0, 0x6861), USB_DEVICE_DATA(&rt2500usb_ops) },
1882         { USB_DEVICE(0x0db0, 0x6865), USB_DEVICE_DATA(&rt2500usb_ops) },
1883         { USB_DEVICE(0x0db0, 0x6869), USB_DEVICE_DATA(&rt2500usb_ops) },
1884         /* Ralink */
1885         { USB_DEVICE(0x148f, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1886         { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
1887         { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
1888         { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1889         /* Siemens */
1890         { USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
1891         /* SMC */
1892         { USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
1893         /* Spairon */
1894         { USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
1895         /* Trust */
1896         { USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1897         /* Zinwell */
1898         { USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
1899         { 0, }
1900 };
1901
1902 MODULE_AUTHOR(DRV_PROJECT);
1903 MODULE_VERSION(DRV_VERSION);
1904 MODULE_DESCRIPTION("Ralink RT2500 USB Wireless LAN driver.");
1905 MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards");
1906 MODULE_DEVICE_TABLE(usb, rt2500usb_device_table);
1907 MODULE_LICENSE("GPL");
1908
1909 static struct usb_driver rt2500usb_driver = {
1910         .name           = KBUILD_MODNAME,
1911         .id_table       = rt2500usb_device_table,
1912         .probe          = rt2x00usb_probe,
1913         .disconnect     = rt2x00usb_disconnect,
1914         .suspend        = rt2x00usb_suspend,
1915         .resume         = rt2x00usb_resume,
1916 };
1917
1918 static int __init rt2500usb_init(void)
1919 {
1920         return usb_register(&rt2500usb_driver);
1921 }
1922
1923 static void __exit rt2500usb_exit(void)
1924 {
1925         usb_deregister(&rt2500usb_driver);
1926 }
1927
1928 module_init(rt2500usb_init);
1929 module_exit(rt2500usb_exit);