]> err.no Git - linux-2.6/blob - drivers/net/wireless/rt2x00/rt2400pci.c
rt2x00: Fix Descriptor DMA initialization
[linux-2.6] / drivers / net / wireless / rt2x00 / rt2400pci.c
1 /*
2         Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
3         <http://rt2x00.serialmonkey.com>
4
5         This program is free software; you can redistribute it and/or modify
6         it under the terms of the GNU General Public License as published by
7         the Free Software Foundation; either version 2 of the License, or
8         (at your option) any later version.
9
10         This program is distributed in the hope that it will be useful,
11         but WITHOUT ANY WARRANTY; without even the implied warranty of
12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13         GNU General Public License for more details.
14
15         You should have received a copy of the GNU General Public License
16         along with this program; if not, write to the
17         Free Software Foundation, Inc.,
18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19  */
20
21 /*
22         Module: rt2400pci
23         Abstract: rt2400pci device specific routines.
24         Supported chipsets: RT2460.
25  */
26
27 #include <linux/delay.h>
28 #include <linux/etherdevice.h>
29 #include <linux/init.h>
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/pci.h>
33 #include <linux/eeprom_93cx6.h>
34
35 #include "rt2x00.h"
36 #include "rt2x00pci.h"
37 #include "rt2400pci.h"
38
39 /*
40  * Register access.
41  * All access to the CSR registers will go through the methods
42  * rt2x00pci_register_read and rt2x00pci_register_write.
43  * BBP and RF register require indirect register access,
44  * and use the CSR registers BBPCSR and RFCSR to achieve this.
45  * These indirect registers work with busy bits,
46  * and we will try maximal REGISTER_BUSY_COUNT times to access
47  * the register while taking a REGISTER_BUSY_DELAY us delay
48  * between each attampt. When the busy bit is still set at that time,
49  * the access attempt is considered to have failed,
50  * and we will print an error.
51  */
52 static u32 rt2400pci_bbp_check(struct rt2x00_dev *rt2x00dev)
53 {
54         u32 reg;
55         unsigned int i;
56
57         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
58                 rt2x00pci_register_read(rt2x00dev, BBPCSR, &reg);
59                 if (!rt2x00_get_field32(reg, BBPCSR_BUSY))
60                         break;
61                 udelay(REGISTER_BUSY_DELAY);
62         }
63
64         return reg;
65 }
66
67 static void rt2400pci_bbp_write(struct rt2x00_dev *rt2x00dev,
68                                 const unsigned int word, const u8 value)
69 {
70         u32 reg;
71
72         /*
73          * Wait until the BBP becomes ready.
74          */
75         reg = rt2400pci_bbp_check(rt2x00dev);
76         if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
77                 ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n");
78                 return;
79         }
80
81         /*
82          * Write the data into the BBP.
83          */
84         reg = 0;
85         rt2x00_set_field32(&reg, BBPCSR_VALUE, value);
86         rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
87         rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
88         rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 1);
89
90         rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
91 }
92
93 static void rt2400pci_bbp_read(struct rt2x00_dev *rt2x00dev,
94                                const unsigned int word, u8 *value)
95 {
96         u32 reg;
97
98         /*
99          * Wait until the BBP becomes ready.
100          */
101         reg = rt2400pci_bbp_check(rt2x00dev);
102         if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
103                 ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
104                 return;
105         }
106
107         /*
108          * Write the request into the BBP.
109          */
110         reg = 0;
111         rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
112         rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
113         rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 0);
114
115         rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
116
117         /*
118          * Wait until the BBP becomes ready.
119          */
120         reg = rt2400pci_bbp_check(rt2x00dev);
121         if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
122                 ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
123                 *value = 0xff;
124                 return;
125         }
126
127         *value = rt2x00_get_field32(reg, BBPCSR_VALUE);
128 }
129
130 static void rt2400pci_rf_write(struct rt2x00_dev *rt2x00dev,
131                                const unsigned int word, const u32 value)
132 {
133         u32 reg;
134         unsigned int i;
135
136         if (!word)
137                 return;
138
139         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
140                 rt2x00pci_register_read(rt2x00dev, RFCSR, &reg);
141                 if (!rt2x00_get_field32(reg, RFCSR_BUSY))
142                         goto rf_write;
143                 udelay(REGISTER_BUSY_DELAY);
144         }
145
146         ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n");
147         return;
148
149 rf_write:
150         reg = 0;
151         rt2x00_set_field32(&reg, RFCSR_VALUE, value);
152         rt2x00_set_field32(&reg, RFCSR_NUMBER_OF_BITS, 20);
153         rt2x00_set_field32(&reg, RFCSR_IF_SELECT, 0);
154         rt2x00_set_field32(&reg, RFCSR_BUSY, 1);
155
156         rt2x00pci_register_write(rt2x00dev, RFCSR, reg);
157         rt2x00_rf_write(rt2x00dev, word, value);
158 }
159
160 static void rt2400pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
161 {
162         struct rt2x00_dev *rt2x00dev = eeprom->data;
163         u32 reg;
164
165         rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
166
167         eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN);
168         eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT);
169         eeprom->reg_data_clock =
170             !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK);
171         eeprom->reg_chip_select =
172             !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT);
173 }
174
175 static void rt2400pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
176 {
177         struct rt2x00_dev *rt2x00dev = eeprom->data;
178         u32 reg = 0;
179
180         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in);
181         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out);
182         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_CLOCK,
183                            !!eeprom->reg_data_clock);
184         rt2x00_set_field32(&reg, CSR21_EEPROM_CHIP_SELECT,
185                            !!eeprom->reg_chip_select);
186
187         rt2x00pci_register_write(rt2x00dev, CSR21, reg);
188 }
189
190 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
191 #define CSR_OFFSET(__word)      ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
192
193 static void rt2400pci_read_csr(struct rt2x00_dev *rt2x00dev,
194                                const unsigned int word, u32 *data)
195 {
196         rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data);
197 }
198
199 static void rt2400pci_write_csr(struct rt2x00_dev *rt2x00dev,
200                                 const unsigned int word, u32 data)
201 {
202         rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data);
203 }
204
205 static const struct rt2x00debug rt2400pci_rt2x00debug = {
206         .owner  = THIS_MODULE,
207         .csr    = {
208                 .read           = rt2400pci_read_csr,
209                 .write          = rt2400pci_write_csr,
210                 .word_size      = sizeof(u32),
211                 .word_count     = CSR_REG_SIZE / sizeof(u32),
212         },
213         .eeprom = {
214                 .read           = rt2x00_eeprom_read,
215                 .write          = rt2x00_eeprom_write,
216                 .word_size      = sizeof(u16),
217                 .word_count     = EEPROM_SIZE / sizeof(u16),
218         },
219         .bbp    = {
220                 .read           = rt2400pci_bbp_read,
221                 .write          = rt2400pci_bbp_write,
222                 .word_size      = sizeof(u8),
223                 .word_count     = BBP_SIZE / sizeof(u8),
224         },
225         .rf     = {
226                 .read           = rt2x00_rf_read,
227                 .write          = rt2400pci_rf_write,
228                 .word_size      = sizeof(u32),
229                 .word_count     = RF_SIZE / sizeof(u32),
230         },
231 };
232 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
233
234 #ifdef CONFIG_RT2400PCI_RFKILL
235 static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
236 {
237         u32 reg;
238
239         rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
240         return rt2x00_get_field32(reg, GPIOCSR_BIT0);
241 }
242 #else
243 #define rt2400pci_rfkill_poll   NULL
244 #endif /* CONFIG_RT2400PCI_RFKILL */
245
246 #ifdef CONFIG_RT2400PCI_LEDS
247 static void rt2400pci_led_brightness(struct led_classdev *led_cdev,
248                                      enum led_brightness brightness)
249 {
250         struct rt2x00_led *led =
251             container_of(led_cdev, struct rt2x00_led, led_dev);
252         unsigned int enabled = brightness != LED_OFF;
253         unsigned int activity =
254             led->rt2x00dev->led_flags & LED_SUPPORT_ACTIVITY;
255         u32 reg;
256
257         rt2x00pci_register_read(led->rt2x00dev, LEDCSR, &reg);
258
259         if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC) {
260                 rt2x00_set_field32(&reg, LEDCSR_LINK, enabled);
261                 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, enabled && activity);
262         }
263
264         rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg);
265 }
266 #else
267 #define rt2400pci_led_brightness        NULL
268 #endif /* CONFIG_RT2400PCI_LEDS */
269
270 /*
271  * Configuration handlers.
272  */
273 static void rt2400pci_config_intf(struct rt2x00_dev *rt2x00dev,
274                                   struct rt2x00_intf *intf,
275                                   struct rt2x00intf_conf *conf,
276                                   const unsigned int flags)
277 {
278         unsigned int bcn_preload;
279         u32 reg;
280
281         if (flags & CONFIG_UPDATE_TYPE) {
282                 rt2x00pci_register_write(rt2x00dev, CSR14, 0);
283
284                 /*
285                  * Enable beacon config
286                  */
287                 bcn_preload = PREAMBLE + get_duration(IEEE80211_HEADER, 20);
288                 rt2x00pci_register_read(rt2x00dev, BCNCSR1, &reg);
289                 rt2x00_set_field32(&reg, BCNCSR1_PRELOAD, bcn_preload);
290                 rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg);
291
292                 /*
293                  * Enable synchronisation.
294                  */
295                 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
296                 rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
297                 rt2x00_set_field32(&reg, CSR14_TBCN,
298                                    (conf->sync == TSF_SYNC_BEACON));
299                 rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
300                 rt2x00_set_field32(&reg, CSR14_TSF_SYNC, conf->sync);
301                 rt2x00pci_register_write(rt2x00dev, CSR14, reg);
302         }
303
304         if (flags & CONFIG_UPDATE_MAC)
305                 rt2x00pci_register_multiwrite(rt2x00dev, CSR3,
306                                               conf->mac, sizeof(conf->mac));
307
308         if (flags & CONFIG_UPDATE_BSSID)
309                 rt2x00pci_register_multiwrite(rt2x00dev, CSR5,
310                                               conf->bssid, sizeof(conf->bssid));
311 }
312
313 static int rt2400pci_config_preamble(struct rt2x00_dev *rt2x00dev,
314                                      const int short_preamble,
315                                      const int ack_timeout,
316                                      const int ack_consume_time)
317 {
318         int preamble_mask;
319         u32 reg;
320
321         /*
322          * When short preamble is enabled, we should set bit 0x08
323          */
324         preamble_mask = short_preamble << 3;
325
326         rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
327         rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, ack_timeout);
328         rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME, ack_consume_time);
329         rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
330
331         rt2x00pci_register_read(rt2x00dev, ARCSR2, &reg);
332         rt2x00_set_field32(&reg, ARCSR2_SIGNAL, 0x00 | preamble_mask);
333         rt2x00_set_field32(&reg, ARCSR2_SERVICE, 0x04);
334         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10));
335         rt2x00pci_register_write(rt2x00dev, ARCSR2, reg);
336
337         rt2x00pci_register_read(rt2x00dev, ARCSR3, &reg);
338         rt2x00_set_field32(&reg, ARCSR3_SIGNAL, 0x01 | preamble_mask);
339         rt2x00_set_field32(&reg, ARCSR3_SERVICE, 0x04);
340         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20));
341         rt2x00pci_register_write(rt2x00dev, ARCSR3, reg);
342
343         rt2x00pci_register_read(rt2x00dev, ARCSR4, &reg);
344         rt2x00_set_field32(&reg, ARCSR4_SIGNAL, 0x02 | preamble_mask);
345         rt2x00_set_field32(&reg, ARCSR4_SERVICE, 0x04);
346         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55));
347         rt2x00pci_register_write(rt2x00dev, ARCSR4, reg);
348
349         rt2x00pci_register_read(rt2x00dev, ARCSR5, &reg);
350         rt2x00_set_field32(&reg, ARCSR5_SIGNAL, 0x03 | preamble_mask);
351         rt2x00_set_field32(&reg, ARCSR5_SERVICE, 0x84);
352         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110));
353         rt2x00pci_register_write(rt2x00dev, ARCSR5, reg);
354
355         return 0;
356 }
357
358 static void rt2400pci_config_phymode(struct rt2x00_dev *rt2x00dev,
359                                      const int basic_rate_mask)
360 {
361         rt2x00pci_register_write(rt2x00dev, ARCSR1, basic_rate_mask);
362 }
363
364 static void rt2400pci_config_channel(struct rt2x00_dev *rt2x00dev,
365                                      struct rf_channel *rf)
366 {
367         /*
368          * Switch on tuning bits.
369          */
370         rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1);
371         rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1);
372
373         rt2400pci_rf_write(rt2x00dev, 1, rf->rf1);
374         rt2400pci_rf_write(rt2x00dev, 2, rf->rf2);
375         rt2400pci_rf_write(rt2x00dev, 3, rf->rf3);
376
377         /*
378          * RF2420 chipset don't need any additional actions.
379          */
380         if (rt2x00_rf(&rt2x00dev->chip, RF2420))
381                 return;
382
383         /*
384          * For the RT2421 chipsets we need to write an invalid
385          * reference clock rate to activate auto_tune.
386          * After that we set the value back to the correct channel.
387          */
388         rt2400pci_rf_write(rt2x00dev, 1, rf->rf1);
389         rt2400pci_rf_write(rt2x00dev, 2, 0x000c2a32);
390         rt2400pci_rf_write(rt2x00dev, 3, rf->rf3);
391
392         msleep(1);
393
394         rt2400pci_rf_write(rt2x00dev, 1, rf->rf1);
395         rt2400pci_rf_write(rt2x00dev, 2, rf->rf2);
396         rt2400pci_rf_write(rt2x00dev, 3, rf->rf3);
397
398         msleep(1);
399
400         /*
401          * Switch off tuning bits.
402          */
403         rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0);
404         rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0);
405
406         rt2400pci_rf_write(rt2x00dev, 1, rf->rf1);
407         rt2400pci_rf_write(rt2x00dev, 3, rf->rf3);
408
409         /*
410          * Clear false CRC during channel switch.
411          */
412         rt2x00pci_register_read(rt2x00dev, CNT0, &rf->rf1);
413 }
414
415 static void rt2400pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower)
416 {
417         rt2400pci_bbp_write(rt2x00dev, 3, TXPOWER_TO_DEV(txpower));
418 }
419
420 static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev,
421                                      struct antenna_setup *ant)
422 {
423         u8 r1;
424         u8 r4;
425
426         rt2400pci_bbp_read(rt2x00dev, 4, &r4);
427         rt2400pci_bbp_read(rt2x00dev, 1, &r1);
428
429         /*
430          * Configure the TX antenna.
431          */
432         switch (ant->tx) {
433         case ANTENNA_HW_DIVERSITY:
434                 rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 1);
435                 break;
436         case ANTENNA_A:
437                 rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 0);
438                 break;
439         case ANTENNA_SW_DIVERSITY:
440                 /*
441                  * NOTE: We should never come here because rt2x00lib is
442                  * supposed to catch this and send us the correct antenna
443                  * explicitely. However we are nog going to bug about this.
444                  * Instead, just default to antenna B.
445                  */
446         case ANTENNA_B:
447                 rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 2);
448                 break;
449         }
450
451         /*
452          * Configure the RX antenna.
453          */
454         switch (ant->rx) {
455         case ANTENNA_HW_DIVERSITY:
456                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
457                 break;
458         case ANTENNA_A:
459                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 0);
460                 break;
461         case ANTENNA_SW_DIVERSITY:
462                 /*
463                  * NOTE: We should never come here because rt2x00lib is
464                  * supposed to catch this and send us the correct antenna
465                  * explicitely. However we are nog going to bug about this.
466                  * Instead, just default to antenna B.
467                  */
468         case ANTENNA_B:
469                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
470                 break;
471         }
472
473         rt2400pci_bbp_write(rt2x00dev, 4, r4);
474         rt2400pci_bbp_write(rt2x00dev, 1, r1);
475 }
476
477 static void rt2400pci_config_duration(struct rt2x00_dev *rt2x00dev,
478                                       struct rt2x00lib_conf *libconf)
479 {
480         u32 reg;
481
482         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
483         rt2x00_set_field32(&reg, CSR11_SLOT_TIME, libconf->slot_time);
484         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
485
486         rt2x00pci_register_read(rt2x00dev, CSR18, &reg);
487         rt2x00_set_field32(&reg, CSR18_SIFS, libconf->sifs);
488         rt2x00_set_field32(&reg, CSR18_PIFS, libconf->pifs);
489         rt2x00pci_register_write(rt2x00dev, CSR18, reg);
490
491         rt2x00pci_register_read(rt2x00dev, CSR19, &reg);
492         rt2x00_set_field32(&reg, CSR19_DIFS, libconf->difs);
493         rt2x00_set_field32(&reg, CSR19_EIFS, libconf->eifs);
494         rt2x00pci_register_write(rt2x00dev, CSR19, reg);
495
496         rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
497         rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
498         rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
499         rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
500
501         rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
502         rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL,
503                            libconf->conf->beacon_int * 16);
504         rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION,
505                            libconf->conf->beacon_int * 16);
506         rt2x00pci_register_write(rt2x00dev, CSR12, reg);
507 }
508
509 static void rt2400pci_config(struct rt2x00_dev *rt2x00dev,
510                              struct rt2x00lib_conf *libconf,
511                              const unsigned int flags)
512 {
513         if (flags & CONFIG_UPDATE_PHYMODE)
514                 rt2400pci_config_phymode(rt2x00dev, libconf->basic_rates);
515         if (flags & CONFIG_UPDATE_CHANNEL)
516                 rt2400pci_config_channel(rt2x00dev, &libconf->rf);
517         if (flags & CONFIG_UPDATE_TXPOWER)
518                 rt2400pci_config_txpower(rt2x00dev,
519                                          libconf->conf->power_level);
520         if (flags & CONFIG_UPDATE_ANTENNA)
521                 rt2400pci_config_antenna(rt2x00dev, &libconf->ant);
522         if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
523                 rt2400pci_config_duration(rt2x00dev, libconf);
524 }
525
526 static void rt2400pci_config_cw(struct rt2x00_dev *rt2x00dev,
527                                 const int cw_min, const int cw_max)
528 {
529         u32 reg;
530
531         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
532         rt2x00_set_field32(&reg, CSR11_CWMIN, cw_min);
533         rt2x00_set_field32(&reg, CSR11_CWMAX, cw_max);
534         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
535 }
536
537 /*
538  * Link tuning
539  */
540 static void rt2400pci_link_stats(struct rt2x00_dev *rt2x00dev,
541                                  struct link_qual *qual)
542 {
543         u32 reg;
544         u8 bbp;
545
546         /*
547          * Update FCS error count from register.
548          */
549         rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
550         qual->rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR);
551
552         /*
553          * Update False CCA count from register.
554          */
555         rt2400pci_bbp_read(rt2x00dev, 39, &bbp);
556         qual->false_cca = bbp;
557 }
558
559 static void rt2400pci_reset_tuner(struct rt2x00_dev *rt2x00dev)
560 {
561         rt2400pci_bbp_write(rt2x00dev, 13, 0x08);
562         rt2x00dev->link.vgc_level = 0x08;
563 }
564
565 static void rt2400pci_link_tuner(struct rt2x00_dev *rt2x00dev)
566 {
567         u8 reg;
568
569         /*
570          * The link tuner should not run longer then 60 seconds,
571          * and should run once every 2 seconds.
572          */
573         if (rt2x00dev->link.count > 60 || !(rt2x00dev->link.count & 1))
574                 return;
575
576         /*
577          * Base r13 link tuning on the false cca count.
578          */
579         rt2400pci_bbp_read(rt2x00dev, 13, &reg);
580
581         if (rt2x00dev->link.qual.false_cca > 512 && reg < 0x20) {
582                 rt2400pci_bbp_write(rt2x00dev, 13, ++reg);
583                 rt2x00dev->link.vgc_level = reg;
584         } else if (rt2x00dev->link.qual.false_cca < 100 && reg > 0x08) {
585                 rt2400pci_bbp_write(rt2x00dev, 13, --reg);
586                 rt2x00dev->link.vgc_level = reg;
587         }
588 }
589
590 /*
591  * Initialization functions.
592  */
593 static void rt2400pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
594                                    struct queue_entry *entry)
595 {
596         struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data;
597         u32 word;
598
599         rt2x00_desc_read(priv_rx->desc, 2, &word);
600         rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH,
601                            entry->queue->data_size);
602         rt2x00_desc_write(priv_rx->desc, 2, word);
603
604         rt2x00_desc_read(priv_rx->desc, 1, &word);
605         rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, priv_rx->data_dma);
606         rt2x00_desc_write(priv_rx->desc, 1, word);
607
608         rt2x00_desc_read(priv_rx->desc, 0, &word);
609         rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
610         rt2x00_desc_write(priv_rx->desc, 0, word);
611 }
612
613 static void rt2400pci_init_txentry(struct rt2x00_dev *rt2x00dev,
614                                    struct queue_entry *entry)
615 {
616         struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data;
617         u32 word;
618
619         rt2x00_desc_read(priv_tx->desc, 1, &word);
620         rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, priv_tx->data_dma);
621         rt2x00_desc_write(priv_tx->desc, 1, word);
622
623         rt2x00_desc_read(priv_tx->desc, 2, &word);
624         rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH,
625                            entry->queue->data_size);
626         rt2x00_desc_write(priv_tx->desc, 2, word);
627
628         rt2x00_desc_read(priv_tx->desc, 0, &word);
629         rt2x00_set_field32(&word, TXD_W0_VALID, 0);
630         rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
631         rt2x00_desc_write(priv_tx->desc, 0, word);
632 }
633
634 static int rt2400pci_init_queues(struct rt2x00_dev *rt2x00dev)
635 {
636         struct queue_entry_priv_pci_rx *priv_rx;
637         struct queue_entry_priv_pci_tx *priv_tx;
638         u32 reg;
639
640         /*
641          * Initialize registers.
642          */
643         rt2x00pci_register_read(rt2x00dev, TXCSR2, &reg);
644         rt2x00_set_field32(&reg, TXCSR2_TXD_SIZE, rt2x00dev->tx[0].desc_size);
645         rt2x00_set_field32(&reg, TXCSR2_NUM_TXD, rt2x00dev->tx[1].limit);
646         rt2x00_set_field32(&reg, TXCSR2_NUM_ATIM, rt2x00dev->bcn[1].limit);
647         rt2x00_set_field32(&reg, TXCSR2_NUM_PRIO, rt2x00dev->tx[0].limit);
648         rt2x00pci_register_write(rt2x00dev, TXCSR2, reg);
649
650         priv_tx = rt2x00dev->tx[1].entries[0].priv_data;
651         rt2x00pci_register_read(rt2x00dev, TXCSR3, &reg);
652         rt2x00_set_field32(&reg, TXCSR3_TX_RING_REGISTER,
653                            priv_tx->desc_dma);
654         rt2x00pci_register_write(rt2x00dev, TXCSR3, reg);
655
656         priv_tx = rt2x00dev->tx[0].entries[0].priv_data;
657         rt2x00pci_register_read(rt2x00dev, TXCSR5, &reg);
658         rt2x00_set_field32(&reg, TXCSR5_PRIO_RING_REGISTER,
659                            priv_tx->desc_dma);
660         rt2x00pci_register_write(rt2x00dev, TXCSR5, reg);
661
662         priv_tx = rt2x00dev->bcn[1].entries[0].priv_data;
663         rt2x00pci_register_read(rt2x00dev, TXCSR4, &reg);
664         rt2x00_set_field32(&reg, TXCSR4_ATIM_RING_REGISTER,
665                            priv_tx->desc_dma);
666         rt2x00pci_register_write(rt2x00dev, TXCSR4, reg);
667
668         priv_tx = rt2x00dev->bcn[0].entries[0].priv_data;
669         rt2x00pci_register_read(rt2x00dev, TXCSR6, &reg);
670         rt2x00_set_field32(&reg, TXCSR6_BEACON_RING_REGISTER,
671                            priv_tx->desc_dma);
672         rt2x00pci_register_write(rt2x00dev, TXCSR6, reg);
673
674         rt2x00pci_register_read(rt2x00dev, RXCSR1, &reg);
675         rt2x00_set_field32(&reg, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size);
676         rt2x00_set_field32(&reg, RXCSR1_NUM_RXD, rt2x00dev->rx->limit);
677         rt2x00pci_register_write(rt2x00dev, RXCSR1, reg);
678
679         priv_rx = rt2x00dev->rx->entries[0].priv_data;
680         rt2x00pci_register_read(rt2x00dev, RXCSR2, &reg);
681         rt2x00_set_field32(&reg, RXCSR2_RX_RING_REGISTER, priv_tx->desc_dma);
682         rt2x00pci_register_write(rt2x00dev, RXCSR2, reg);
683
684         return 0;
685 }
686
687 static int rt2400pci_init_registers(struct rt2x00_dev *rt2x00dev)
688 {
689         u32 reg;
690
691         rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002);
692         rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002);
693         rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00023f20);
694         rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002);
695
696         rt2x00pci_register_read(rt2x00dev, TIMECSR, &reg);
697         rt2x00_set_field32(&reg, TIMECSR_US_COUNT, 33);
698         rt2x00_set_field32(&reg, TIMECSR_US_64_COUNT, 63);
699         rt2x00_set_field32(&reg, TIMECSR_BEACON_EXPECT, 0);
700         rt2x00pci_register_write(rt2x00dev, TIMECSR, reg);
701
702         rt2x00pci_register_read(rt2x00dev, CSR9, &reg);
703         rt2x00_set_field32(&reg, CSR9_MAX_FRAME_UNIT,
704                            (rt2x00dev->rx->data_size / 128));
705         rt2x00pci_register_write(rt2x00dev, CSR9, reg);
706
707         rt2x00pci_register_read(rt2x00dev, LEDCSR, &reg);
708         rt2x00_set_field32(&reg, LEDCSR_ON_PERIOD, 70);
709         rt2x00_set_field32(&reg, LEDCSR_OFF_PERIOD, 30);
710         rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
711
712         rt2x00pci_register_write(rt2x00dev, CNT3, 0x3f080000);
713
714         rt2x00pci_register_read(rt2x00dev, ARCSR0, &reg);
715         rt2x00_set_field32(&reg, ARCSR0_AR_BBP_DATA0, 133);
716         rt2x00_set_field32(&reg, ARCSR0_AR_BBP_ID0, 134);
717         rt2x00_set_field32(&reg, ARCSR0_AR_BBP_DATA1, 136);
718         rt2x00_set_field32(&reg, ARCSR0_AR_BBP_ID1, 135);
719         rt2x00pci_register_write(rt2x00dev, ARCSR0, reg);
720
721         rt2x00pci_register_read(rt2x00dev, RXCSR3, &reg);
722         rt2x00_set_field32(&reg, RXCSR3_BBP_ID0, 3); /* Tx power.*/
723         rt2x00_set_field32(&reg, RXCSR3_BBP_ID0_VALID, 1);
724         rt2x00_set_field32(&reg, RXCSR3_BBP_ID1, 32); /* Signal */
725         rt2x00_set_field32(&reg, RXCSR3_BBP_ID1_VALID, 1);
726         rt2x00_set_field32(&reg, RXCSR3_BBP_ID2, 36); /* Rssi */
727         rt2x00_set_field32(&reg, RXCSR3_BBP_ID2_VALID, 1);
728         rt2x00pci_register_write(rt2x00dev, RXCSR3, reg);
729
730         rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100);
731
732         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
733                 return -EBUSY;
734
735         rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00217223);
736         rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518);
737
738         rt2x00pci_register_read(rt2x00dev, MACCSR2, &reg);
739         rt2x00_set_field32(&reg, MACCSR2_DELAY, 64);
740         rt2x00pci_register_write(rt2x00dev, MACCSR2, reg);
741
742         rt2x00pci_register_read(rt2x00dev, RALINKCSR, &reg);
743         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA0, 17);
744         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID0, 154);
745         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA1, 0);
746         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID1, 154);
747         rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg);
748
749         rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
750         rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 1);
751         rt2x00_set_field32(&reg, CSR1_BBP_RESET, 0);
752         rt2x00_set_field32(&reg, CSR1_HOST_READY, 0);
753         rt2x00pci_register_write(rt2x00dev, CSR1, reg);
754
755         rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
756         rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 0);
757         rt2x00_set_field32(&reg, CSR1_HOST_READY, 1);
758         rt2x00pci_register_write(rt2x00dev, CSR1, reg);
759
760         /*
761          * We must clear the FCS and FIFO error count.
762          * These registers are cleared on read,
763          * so we may pass a useless variable to store the value.
764          */
765         rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
766         rt2x00pci_register_read(rt2x00dev, CNT4, &reg);
767
768         return 0;
769 }
770
771 static int rt2400pci_init_bbp(struct rt2x00_dev *rt2x00dev)
772 {
773         unsigned int i;
774         u16 eeprom;
775         u8 reg_id;
776         u8 value;
777
778         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
779                 rt2400pci_bbp_read(rt2x00dev, 0, &value);
780                 if ((value != 0xff) && (value != 0x00))
781                         goto continue_csr_init;
782                 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
783                 udelay(REGISTER_BUSY_DELAY);
784         }
785
786         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
787         return -EACCES;
788
789 continue_csr_init:
790         rt2400pci_bbp_write(rt2x00dev, 1, 0x00);
791         rt2400pci_bbp_write(rt2x00dev, 3, 0x27);
792         rt2400pci_bbp_write(rt2x00dev, 4, 0x08);
793         rt2400pci_bbp_write(rt2x00dev, 10, 0x0f);
794         rt2400pci_bbp_write(rt2x00dev, 15, 0x72);
795         rt2400pci_bbp_write(rt2x00dev, 16, 0x74);
796         rt2400pci_bbp_write(rt2x00dev, 17, 0x20);
797         rt2400pci_bbp_write(rt2x00dev, 18, 0x72);
798         rt2400pci_bbp_write(rt2x00dev, 19, 0x0b);
799         rt2400pci_bbp_write(rt2x00dev, 20, 0x00);
800         rt2400pci_bbp_write(rt2x00dev, 28, 0x11);
801         rt2400pci_bbp_write(rt2x00dev, 29, 0x04);
802         rt2400pci_bbp_write(rt2x00dev, 30, 0x21);
803         rt2400pci_bbp_write(rt2x00dev, 31, 0x00);
804
805         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
806                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
807
808                 if (eeprom != 0xffff && eeprom != 0x0000) {
809                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
810                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
811                         rt2400pci_bbp_write(rt2x00dev, reg_id, value);
812                 }
813         }
814
815         return 0;
816 }
817
818 /*
819  * Device state switch handlers.
820  */
821 static void rt2400pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
822                                 enum dev_state state)
823 {
824         u32 reg;
825
826         rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
827         rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX,
828                            state == STATE_RADIO_RX_OFF);
829         rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
830 }
831
832 static void rt2400pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
833                                  enum dev_state state)
834 {
835         int mask = (state == STATE_RADIO_IRQ_OFF);
836         u32 reg;
837
838         /*
839          * When interrupts are being enabled, the interrupt registers
840          * should clear the register to assure a clean state.
841          */
842         if (state == STATE_RADIO_IRQ_ON) {
843                 rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
844                 rt2x00pci_register_write(rt2x00dev, CSR7, reg);
845         }
846
847         /*
848          * Only toggle the interrupts bits we are going to use.
849          * Non-checked interrupt bits are disabled by default.
850          */
851         rt2x00pci_register_read(rt2x00dev, CSR8, &reg);
852         rt2x00_set_field32(&reg, CSR8_TBCN_EXPIRE, mask);
853         rt2x00_set_field32(&reg, CSR8_TXDONE_TXRING, mask);
854         rt2x00_set_field32(&reg, CSR8_TXDONE_ATIMRING, mask);
855         rt2x00_set_field32(&reg, CSR8_TXDONE_PRIORING, mask);
856         rt2x00_set_field32(&reg, CSR8_RXDONE, mask);
857         rt2x00pci_register_write(rt2x00dev, CSR8, reg);
858 }
859
860 static int rt2400pci_enable_radio(struct rt2x00_dev *rt2x00dev)
861 {
862         /*
863          * Initialize all registers.
864          */
865         if (rt2400pci_init_queues(rt2x00dev) ||
866             rt2400pci_init_registers(rt2x00dev) ||
867             rt2400pci_init_bbp(rt2x00dev)) {
868                 ERROR(rt2x00dev, "Register initialization failed.\n");
869                 return -EIO;
870         }
871
872         /*
873          * Enable interrupts.
874          */
875         rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON);
876
877         return 0;
878 }
879
880 static void rt2400pci_disable_radio(struct rt2x00_dev *rt2x00dev)
881 {
882         u32 reg;
883
884         rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
885
886         /*
887          * Disable synchronisation.
888          */
889         rt2x00pci_register_write(rt2x00dev, CSR14, 0);
890
891         /*
892          * Cancel RX and TX.
893          */
894         rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
895         rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
896         rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
897
898         /*
899          * Disable interrupts.
900          */
901         rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF);
902 }
903
904 static int rt2400pci_set_state(struct rt2x00_dev *rt2x00dev,
905                                enum dev_state state)
906 {
907         u32 reg;
908         unsigned int i;
909         char put_to_sleep;
910         char bbp_state;
911         char rf_state;
912
913         put_to_sleep = (state != STATE_AWAKE);
914
915         rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
916         rt2x00_set_field32(&reg, PWRCSR1_SET_STATE, 1);
917         rt2x00_set_field32(&reg, PWRCSR1_BBP_DESIRE_STATE, state);
918         rt2x00_set_field32(&reg, PWRCSR1_RF_DESIRE_STATE, state);
919         rt2x00_set_field32(&reg, PWRCSR1_PUT_TO_SLEEP, put_to_sleep);
920         rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg);
921
922         /*
923          * Device is not guaranteed to be in the requested state yet.
924          * We must wait until the register indicates that the
925          * device has entered the correct state.
926          */
927         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
928                 rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
929                 bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE);
930                 rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE);
931                 if (bbp_state == state && rf_state == state)
932                         return 0;
933                 msleep(10);
934         }
935
936         NOTICE(rt2x00dev, "Device failed to enter state %d, "
937                "current device state: bbp %d and rf %d.\n",
938                state, bbp_state, rf_state);
939
940         return -EBUSY;
941 }
942
943 static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev,
944                                       enum dev_state state)
945 {
946         int retval = 0;
947
948         switch (state) {
949         case STATE_RADIO_ON:
950                 retval = rt2400pci_enable_radio(rt2x00dev);
951                 break;
952         case STATE_RADIO_OFF:
953                 rt2400pci_disable_radio(rt2x00dev);
954                 break;
955         case STATE_RADIO_RX_ON:
956         case STATE_RADIO_RX_ON_LINK:
957                 rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
958                 break;
959         case STATE_RADIO_RX_OFF:
960         case STATE_RADIO_RX_OFF_LINK:
961                 rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
962                 break;
963         case STATE_DEEP_SLEEP:
964         case STATE_SLEEP:
965         case STATE_STANDBY:
966         case STATE_AWAKE:
967                 retval = rt2400pci_set_state(rt2x00dev, state);
968                 break;
969         default:
970                 retval = -ENOTSUPP;
971                 break;
972         }
973
974         return retval;
975 }
976
977 /*
978  * TX descriptor initialization
979  */
980 static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
981                                     struct sk_buff *skb,
982                                     struct txentry_desc *txdesc,
983                                     struct ieee80211_tx_control *control)
984 {
985         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
986         __le32 *txd = skbdesc->desc;
987         u32 word;
988
989         /*
990          * Start writing the descriptor words.
991          */
992         rt2x00_desc_read(txd, 2, &word);
993         rt2x00_set_field32(&word, TXD_W2_DATABYTE_COUNT, skbdesc->data_len);
994         rt2x00_desc_write(txd, 2, word);
995
996         rt2x00_desc_read(txd, 3, &word);
997         rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, txdesc->signal);
998         rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL_REGNUM, 5);
999         rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL_BUSY, 1);
1000         rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, txdesc->service);
1001         rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE_REGNUM, 6);
1002         rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE_BUSY, 1);
1003         rt2x00_desc_write(txd, 3, word);
1004
1005         rt2x00_desc_read(txd, 4, &word);
1006         rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_LOW, txdesc->length_low);
1007         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW_REGNUM, 8);
1008         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW_BUSY, 1);
1009         rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_HIGH, txdesc->length_high);
1010         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH_REGNUM, 7);
1011         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH_BUSY, 1);
1012         rt2x00_desc_write(txd, 4, word);
1013
1014         rt2x00_desc_read(txd, 0, &word);
1015         rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
1016         rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1017         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1018                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
1019         rt2x00_set_field32(&word, TXD_W0_ACK,
1020                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
1021         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1022                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
1023         rt2x00_set_field32(&word, TXD_W0_RTS,
1024                            test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags));
1025         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
1026         rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1027                            !!(control->flags &
1028                               IEEE80211_TXCTL_LONG_RETRY_LIMIT));
1029         rt2x00_desc_write(txd, 0, word);
1030 }
1031
1032 /*
1033  * TX data initialization
1034  */
1035 static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1036                                     const unsigned int queue)
1037 {
1038         u32 reg;
1039
1040         if (queue == RT2X00_BCN_QUEUE_BEACON) {
1041                 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
1042                 if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
1043                         rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
1044                         rt2x00pci_register_write(rt2x00dev, CSR14, reg);
1045                 }
1046                 return;
1047         }
1048
1049         rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1050         rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO,
1051                            (queue == IEEE80211_TX_QUEUE_DATA0));
1052         rt2x00_set_field32(&reg, TXCSR0_KICK_TX,
1053                            (queue == IEEE80211_TX_QUEUE_DATA1));
1054         rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM,
1055                            (queue == RT2X00_BCN_QUEUE_ATIM));
1056         rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1057 }
1058
1059 /*
1060  * RX control handlers
1061  */
1062 static void rt2400pci_fill_rxdone(struct queue_entry *entry,
1063                                   struct rxdone_entry_desc *rxdesc)
1064 {
1065         struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data;
1066         u32 word0;
1067         u32 word2;
1068
1069         rt2x00_desc_read(priv_rx->desc, 0, &word0);
1070         rt2x00_desc_read(priv_rx->desc, 2, &word2);
1071
1072         rxdesc->flags = 0;
1073         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1074                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
1075         if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
1076                 rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
1077
1078         /*
1079          * Obtain the status about this packet.
1080          */
1081         rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
1082         rxdesc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
1083             entry->queue->rt2x00dev->rssi_offset;
1084         rxdesc->ofdm = 0;
1085         rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1086         rxdesc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS);
1087 }
1088
1089 /*
1090  * Interrupt functions.
1091  */
1092 static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev,
1093                              const enum ieee80211_tx_queue queue_idx)
1094 {
1095         struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
1096         struct queue_entry_priv_pci_tx *priv_tx;
1097         struct queue_entry *entry;
1098         struct txdone_entry_desc txdesc;
1099         u32 word;
1100
1101         while (!rt2x00queue_empty(queue)) {
1102                 entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
1103                 priv_tx = entry->priv_data;
1104                 rt2x00_desc_read(priv_tx->desc, 0, &word);
1105
1106                 if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
1107                     !rt2x00_get_field32(word, TXD_W0_VALID))
1108                         break;
1109
1110                 /*
1111                  * Obtain the status about this packet.
1112                  */
1113                 txdesc.status = rt2x00_get_field32(word, TXD_W0_RESULT);
1114                 txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT);
1115
1116                 rt2x00pci_txdone(rt2x00dev, entry, &txdesc);
1117         }
1118 }
1119
1120 static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
1121 {
1122         struct rt2x00_dev *rt2x00dev = dev_instance;
1123         u32 reg;
1124
1125         /*
1126          * Get the interrupt sources & saved to local variable.
1127          * Write register value back to clear pending interrupts.
1128          */
1129         rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
1130         rt2x00pci_register_write(rt2x00dev, CSR7, reg);
1131
1132         if (!reg)
1133                 return IRQ_NONE;
1134
1135         if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
1136                 return IRQ_HANDLED;
1137
1138         /*
1139          * Handle interrupts, walk through all bits
1140          * and run the tasks, the bits are checked in order of
1141          * priority.
1142          */
1143
1144         /*
1145          * 1 - Beacon timer expired interrupt.
1146          */
1147         if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE))
1148                 rt2x00lib_beacondone(rt2x00dev);
1149
1150         /*
1151          * 2 - Rx ring done interrupt.
1152          */
1153         if (rt2x00_get_field32(reg, CSR7_RXDONE))
1154                 rt2x00pci_rxdone(rt2x00dev);
1155
1156         /*
1157          * 3 - Atim ring transmit done interrupt.
1158          */
1159         if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING))
1160                 rt2400pci_txdone(rt2x00dev, RT2X00_BCN_QUEUE_ATIM);
1161
1162         /*
1163          * 4 - Priority ring transmit done interrupt.
1164          */
1165         if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
1166                 rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
1167
1168         /*
1169          * 5 - Tx ring transmit done interrupt.
1170          */
1171         if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
1172                 rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
1173
1174         return IRQ_HANDLED;
1175 }
1176
1177 /*
1178  * Device probe functions.
1179  */
1180 static int rt2400pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1181 {
1182         struct eeprom_93cx6 eeprom;
1183         u32 reg;
1184         u16 word;
1185         u8 *mac;
1186
1187         rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
1188
1189         eeprom.data = rt2x00dev;
1190         eeprom.register_read = rt2400pci_eepromregister_read;
1191         eeprom.register_write = rt2400pci_eepromregister_write;
1192         eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ?
1193             PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
1194         eeprom.reg_data_in = 0;
1195         eeprom.reg_data_out = 0;
1196         eeprom.reg_data_clock = 0;
1197         eeprom.reg_chip_select = 0;
1198
1199         eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
1200                                EEPROM_SIZE / sizeof(u16));
1201
1202         /*
1203          * Start validation of the data that has been read.
1204          */
1205         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1206         if (!is_valid_ether_addr(mac)) {
1207                 DECLARE_MAC_BUF(macbuf);
1208
1209                 random_ether_addr(mac);
1210                 EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
1211         }
1212
1213         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1214         if (word == 0xffff) {
1215                 ERROR(rt2x00dev, "Invalid EEPROM data detected.\n");
1216                 return -EINVAL;
1217         }
1218
1219         return 0;
1220 }
1221
1222 static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
1223 {
1224         u32 reg;
1225         u16 value;
1226         u16 eeprom;
1227
1228         /*
1229          * Read EEPROM word for configuration.
1230          */
1231         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1232
1233         /*
1234          * Identify RF chipset.
1235          */
1236         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1237         rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
1238         rt2x00_set_chip(rt2x00dev, RT2460, value, reg);
1239
1240         if (!rt2x00_rf(&rt2x00dev->chip, RF2420) &&
1241             !rt2x00_rf(&rt2x00dev->chip, RF2421)) {
1242                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1243                 return -ENODEV;
1244         }
1245
1246         /*
1247          * Identify default antenna configuration.
1248          */
1249         rt2x00dev->default_ant.tx =
1250             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1251         rt2x00dev->default_ant.rx =
1252             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1253
1254         /*
1255          * When the eeprom indicates SW_DIVERSITY use HW_DIVERSITY instead.
1256          * I am not 100% sure about this, but the legacy drivers do not
1257          * indicate antenna swapping in software is required when
1258          * diversity is enabled.
1259          */
1260         if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
1261                 rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY;
1262         if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
1263                 rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY;
1264
1265         /*
1266          * Store led mode, for correct led behaviour.
1267          */
1268 #ifdef CONFIG_RT2400PCI_LEDS
1269         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1270
1271         switch (value) {
1272         case LED_MODE_ASUS:
1273         case LED_MODE_ALPHA:
1274         case LED_MODE_DEFAULT:
1275                 rt2x00dev->led_flags = LED_SUPPORT_RADIO;
1276                 break;
1277         case LED_MODE_TXRX_ACTIVITY:
1278                 rt2x00dev->led_flags =
1279                     LED_SUPPORT_RADIO | LED_SUPPORT_ACTIVITY;
1280                 break;
1281         case LED_MODE_SIGNAL_STRENGTH:
1282                 rt2x00dev->led_flags = LED_SUPPORT_RADIO;
1283                 break;
1284         }
1285 #endif /* CONFIG_RT2400PCI_LEDS */
1286
1287         /*
1288          * Detect if this device has an hardware controlled radio.
1289          */
1290 #ifdef CONFIG_RT2400PCI_RFKILL
1291         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
1292                 __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
1293 #endif /* CONFIG_RT2400PCI_RFKILL */
1294
1295         /*
1296          * Check if the BBP tuning should be enabled.
1297          */
1298         if (!rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_AGCVGC_TUNING))
1299                 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1300
1301         return 0;
1302 }
1303
1304 /*
1305  * RF value list for RF2420 & RF2421
1306  * Supports: 2.4 GHz
1307  */
1308 static const struct rf_channel rf_vals_bg[] = {
1309         { 1,  0x00022058, 0x000c1fda, 0x00000101, 0 },
1310         { 2,  0x00022058, 0x000c1fee, 0x00000101, 0 },
1311         { 3,  0x00022058, 0x000c2002, 0x00000101, 0 },
1312         { 4,  0x00022058, 0x000c2016, 0x00000101, 0 },
1313         { 5,  0x00022058, 0x000c202a, 0x00000101, 0 },
1314         { 6,  0x00022058, 0x000c203e, 0x00000101, 0 },
1315         { 7,  0x00022058, 0x000c2052, 0x00000101, 0 },
1316         { 8,  0x00022058, 0x000c2066, 0x00000101, 0 },
1317         { 9,  0x00022058, 0x000c207a, 0x00000101, 0 },
1318         { 10, 0x00022058, 0x000c208e, 0x00000101, 0 },
1319         { 11, 0x00022058, 0x000c20a2, 0x00000101, 0 },
1320         { 12, 0x00022058, 0x000c20b6, 0x00000101, 0 },
1321         { 13, 0x00022058, 0x000c20ca, 0x00000101, 0 },
1322         { 14, 0x00022058, 0x000c20fa, 0x00000101, 0 },
1323 };
1324
1325 static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1326 {
1327         struct hw_mode_spec *spec = &rt2x00dev->spec;
1328         u8 *txpower;
1329         unsigned int i;
1330
1331         /*
1332          * Initialize all hw fields.
1333          */
1334         rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
1335         rt2x00dev->hw->extra_tx_headroom = 0;
1336         rt2x00dev->hw->max_signal = MAX_SIGNAL;
1337         rt2x00dev->hw->max_rssi = MAX_RX_SSI;
1338         rt2x00dev->hw->queues = 2;
1339
1340         SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
1341         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1342                                 rt2x00_eeprom_addr(rt2x00dev,
1343                                                    EEPROM_MAC_ADDR_0));
1344
1345         /*
1346          * Convert tx_power array in eeprom.
1347          */
1348         txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1349         for (i = 0; i < 14; i++)
1350                 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1351
1352         /*
1353          * Initialize hw_mode information.
1354          */
1355         spec->num_modes = 1;
1356         spec->num_rates = 4;
1357         spec->tx_power_a = NULL;
1358         spec->tx_power_bg = txpower;
1359         spec->tx_power_default = DEFAULT_TXPOWER;
1360
1361         spec->num_channels = ARRAY_SIZE(rf_vals_bg);
1362         spec->channels = rf_vals_bg;
1363 }
1364
1365 static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
1366 {
1367         int retval;
1368
1369         /*
1370          * Allocate eeprom data.
1371          */
1372         retval = rt2400pci_validate_eeprom(rt2x00dev);
1373         if (retval)
1374                 return retval;
1375
1376         retval = rt2400pci_init_eeprom(rt2x00dev);
1377         if (retval)
1378                 return retval;
1379
1380         /*
1381          * Initialize hw specifications.
1382          */
1383         rt2400pci_probe_hw_mode(rt2x00dev);
1384
1385         /*
1386          * This device requires the atim queue
1387          */
1388         __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
1389
1390         /*
1391          * Set the rssi offset.
1392          */
1393         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1394
1395         return 0;
1396 }
1397
1398 /*
1399  * IEEE80211 stack callback functions.
1400  */
1401 static void rt2400pci_configure_filter(struct ieee80211_hw *hw,
1402                                        unsigned int changed_flags,
1403                                        unsigned int *total_flags,
1404                                        int mc_count,
1405                                        struct dev_addr_list *mc_list)
1406 {
1407         struct rt2x00_dev *rt2x00dev = hw->priv;
1408         u32 reg;
1409
1410         /*
1411          * Mask off any flags we are going to ignore from
1412          * the total_flags field.
1413          */
1414         *total_flags &=
1415             FIF_ALLMULTI |
1416             FIF_FCSFAIL |
1417             FIF_PLCPFAIL |
1418             FIF_CONTROL |
1419             FIF_OTHER_BSS |
1420             FIF_PROMISC_IN_BSS;
1421
1422         /*
1423          * Apply some rules to the filters:
1424          * - Some filters imply different filters to be set.
1425          * - Some things we can't filter out at all.
1426          */
1427         *total_flags |= FIF_ALLMULTI;
1428         if (*total_flags & FIF_OTHER_BSS ||
1429             *total_flags & FIF_PROMISC_IN_BSS)
1430                 *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
1431
1432         /*
1433          * Check if there is any work left for us.
1434          */
1435         if (rt2x00dev->packet_filter == *total_flags)
1436                 return;
1437         rt2x00dev->packet_filter = *total_flags;
1438
1439         /*
1440          * Start configuration steps.
1441          * Note that the version error will always be dropped
1442          * since there is no filter for it at this time.
1443          */
1444         rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
1445         rt2x00_set_field32(&reg, RXCSR0_DROP_CRC,
1446                            !(*total_flags & FIF_FCSFAIL));
1447         rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL,
1448                            !(*total_flags & FIF_PLCPFAIL));
1449         rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL,
1450                            !(*total_flags & FIF_CONTROL));
1451         rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME,
1452                            !(*total_flags & FIF_PROMISC_IN_BSS));
1453         rt2x00_set_field32(&reg, RXCSR0_DROP_TODS,
1454                            !(*total_flags & FIF_PROMISC_IN_BSS));
1455         rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
1456         rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
1457 }
1458
1459 static int rt2400pci_set_retry_limit(struct ieee80211_hw *hw,
1460                                      u32 short_retry, u32 long_retry)
1461 {
1462         struct rt2x00_dev *rt2x00dev = hw->priv;
1463         u32 reg;
1464
1465         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
1466         rt2x00_set_field32(&reg, CSR11_LONG_RETRY, long_retry);
1467         rt2x00_set_field32(&reg, CSR11_SHORT_RETRY, short_retry);
1468         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
1469
1470         return 0;
1471 }
1472
1473 static int rt2400pci_conf_tx(struct ieee80211_hw *hw,
1474                              int queue,
1475                              const struct ieee80211_tx_queue_params *params)
1476 {
1477         struct rt2x00_dev *rt2x00dev = hw->priv;
1478
1479         /*
1480          * We don't support variating cw_min and cw_max variables
1481          * per queue. So by default we only configure the TX queue,
1482          * and ignore all other configurations.
1483          */
1484         if (queue != IEEE80211_TX_QUEUE_DATA0)
1485                 return -EINVAL;
1486
1487         if (rt2x00mac_conf_tx(hw, queue, params))
1488                 return -EINVAL;
1489
1490         /*
1491          * Write configuration to register.
1492          */
1493         rt2400pci_config_cw(rt2x00dev,
1494                             rt2x00dev->tx->cw_min, rt2x00dev->tx->cw_max);
1495
1496         return 0;
1497 }
1498
1499 static u64 rt2400pci_get_tsf(struct ieee80211_hw *hw)
1500 {
1501         struct rt2x00_dev *rt2x00dev = hw->priv;
1502         u64 tsf;
1503         u32 reg;
1504
1505         rt2x00pci_register_read(rt2x00dev, CSR17, &reg);
1506         tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32;
1507         rt2x00pci_register_read(rt2x00dev, CSR16, &reg);
1508         tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER);
1509
1510         return tsf;
1511 }
1512
1513 static void rt2400pci_reset_tsf(struct ieee80211_hw *hw)
1514 {
1515         struct rt2x00_dev *rt2x00dev = hw->priv;
1516
1517         rt2x00pci_register_write(rt2x00dev, CSR16, 0);
1518         rt2x00pci_register_write(rt2x00dev, CSR17, 0);
1519 }
1520
1521 static int rt2400pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
1522                                    struct ieee80211_tx_control *control)
1523 {
1524         struct rt2x00_dev *rt2x00dev = hw->priv;
1525         struct rt2x00_intf *intf = vif_to_intf(control->vif);
1526         struct queue_entry_priv_pci_tx *priv_tx;
1527         struct skb_frame_desc *skbdesc;
1528
1529         if (unlikely(!intf->beacon))
1530                 return -ENOBUFS;
1531
1532         priv_tx = intf->beacon->priv_data;
1533
1534         /*
1535          * Fill in skb descriptor
1536          */
1537         skbdesc = get_skb_frame_desc(skb);
1538         memset(skbdesc, 0, sizeof(*skbdesc));
1539         skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
1540         skbdesc->data = skb->data;
1541         skbdesc->data_len = skb->len;
1542         skbdesc->desc = priv_tx->desc;
1543         skbdesc->desc_len = intf->beacon->queue->desc_size;
1544         skbdesc->entry = intf->beacon;
1545
1546         /*
1547          * mac80211 doesn't provide the control->queue variable
1548          * for beacons. Set our own queue identification so
1549          * it can be used during descriptor initialization.
1550          */
1551         control->queue = RT2X00_BCN_QUEUE_BEACON;
1552         rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
1553
1554         /*
1555          * Enable beacon generation.
1556          * Write entire beacon with descriptor to register,
1557          * and kick the beacon generator.
1558          */
1559         memcpy(priv_tx->data, skb->data, skb->len);
1560         rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue);
1561
1562         return 0;
1563 }
1564
1565 static int rt2400pci_tx_last_beacon(struct ieee80211_hw *hw)
1566 {
1567         struct rt2x00_dev *rt2x00dev = hw->priv;
1568         u32 reg;
1569
1570         rt2x00pci_register_read(rt2x00dev, CSR15, &reg);
1571         return rt2x00_get_field32(reg, CSR15_BEACON_SENT);
1572 }
1573
1574 static const struct ieee80211_ops rt2400pci_mac80211_ops = {
1575         .tx                     = rt2x00mac_tx,
1576         .start                  = rt2x00mac_start,
1577         .stop                   = rt2x00mac_stop,
1578         .add_interface          = rt2x00mac_add_interface,
1579         .remove_interface       = rt2x00mac_remove_interface,
1580         .config                 = rt2x00mac_config,
1581         .config_interface       = rt2x00mac_config_interface,
1582         .configure_filter       = rt2400pci_configure_filter,
1583         .get_stats              = rt2x00mac_get_stats,
1584         .set_retry_limit        = rt2400pci_set_retry_limit,
1585         .bss_info_changed       = rt2x00mac_bss_info_changed,
1586         .conf_tx                = rt2400pci_conf_tx,
1587         .get_tx_stats           = rt2x00mac_get_tx_stats,
1588         .get_tsf                = rt2400pci_get_tsf,
1589         .reset_tsf              = rt2400pci_reset_tsf,
1590         .beacon_update          = rt2400pci_beacon_update,
1591         .tx_last_beacon         = rt2400pci_tx_last_beacon,
1592 };
1593
1594 static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
1595         .irq_handler            = rt2400pci_interrupt,
1596         .probe_hw               = rt2400pci_probe_hw,
1597         .initialize             = rt2x00pci_initialize,
1598         .uninitialize           = rt2x00pci_uninitialize,
1599         .init_rxentry           = rt2400pci_init_rxentry,
1600         .init_txentry           = rt2400pci_init_txentry,
1601         .set_device_state       = rt2400pci_set_device_state,
1602         .rfkill_poll            = rt2400pci_rfkill_poll,
1603         .link_stats             = rt2400pci_link_stats,
1604         .reset_tuner            = rt2400pci_reset_tuner,
1605         .link_tuner             = rt2400pci_link_tuner,
1606         .led_brightness         = rt2400pci_led_brightness,
1607         .write_tx_desc          = rt2400pci_write_tx_desc,
1608         .write_tx_data          = rt2x00pci_write_tx_data,
1609         .kick_tx_queue          = rt2400pci_kick_tx_queue,
1610         .fill_rxdone            = rt2400pci_fill_rxdone,
1611         .config_intf            = rt2400pci_config_intf,
1612         .config_preamble        = rt2400pci_config_preamble,
1613         .config                 = rt2400pci_config,
1614 };
1615
1616 static const struct data_queue_desc rt2400pci_queue_rx = {
1617         .entry_num              = RX_ENTRIES,
1618         .data_size              = DATA_FRAME_SIZE,
1619         .desc_size              = RXD_DESC_SIZE,
1620         .priv_size              = sizeof(struct queue_entry_priv_pci_rx),
1621 };
1622
1623 static const struct data_queue_desc rt2400pci_queue_tx = {
1624         .entry_num              = TX_ENTRIES,
1625         .data_size              = DATA_FRAME_SIZE,
1626         .desc_size              = TXD_DESC_SIZE,
1627         .priv_size              = sizeof(struct queue_entry_priv_pci_tx),
1628 };
1629
1630 static const struct data_queue_desc rt2400pci_queue_bcn = {
1631         .entry_num              = BEACON_ENTRIES,
1632         .data_size              = MGMT_FRAME_SIZE,
1633         .desc_size              = TXD_DESC_SIZE,
1634         .priv_size              = sizeof(struct queue_entry_priv_pci_tx),
1635 };
1636
1637 static const struct data_queue_desc rt2400pci_queue_atim = {
1638         .entry_num              = ATIM_ENTRIES,
1639         .data_size              = DATA_FRAME_SIZE,
1640         .desc_size              = TXD_DESC_SIZE,
1641         .priv_size              = sizeof(struct queue_entry_priv_pci_tx),
1642 };
1643
1644 static const struct rt2x00_ops rt2400pci_ops = {
1645         .name           = KBUILD_MODNAME,
1646         .max_sta_intf   = 1,
1647         .max_ap_intf    = 1,
1648         .eeprom_size    = EEPROM_SIZE,
1649         .rf_size        = RF_SIZE,
1650         .rx             = &rt2400pci_queue_rx,
1651         .tx             = &rt2400pci_queue_tx,
1652         .bcn            = &rt2400pci_queue_bcn,
1653         .atim           = &rt2400pci_queue_atim,
1654         .lib            = &rt2400pci_rt2x00_ops,
1655         .hw             = &rt2400pci_mac80211_ops,
1656 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1657         .debugfs        = &rt2400pci_rt2x00debug,
1658 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1659 };
1660
1661 /*
1662  * RT2400pci module information.
1663  */
1664 static struct pci_device_id rt2400pci_device_table[] = {
1665         { PCI_DEVICE(0x1814, 0x0101), PCI_DEVICE_DATA(&rt2400pci_ops) },
1666         { 0, }
1667 };
1668
1669 MODULE_AUTHOR(DRV_PROJECT);
1670 MODULE_VERSION(DRV_VERSION);
1671 MODULE_DESCRIPTION("Ralink RT2400 PCI & PCMCIA Wireless LAN driver.");
1672 MODULE_SUPPORTED_DEVICE("Ralink RT2460 PCI & PCMCIA chipset based cards");
1673 MODULE_DEVICE_TABLE(pci, rt2400pci_device_table);
1674 MODULE_LICENSE("GPL");
1675
1676 static struct pci_driver rt2400pci_driver = {
1677         .name           = KBUILD_MODNAME,
1678         .id_table       = rt2400pci_device_table,
1679         .probe          = rt2x00pci_probe,
1680         .remove         = __devexit_p(rt2x00pci_remove),
1681         .suspend        = rt2x00pci_suspend,
1682         .resume         = rt2x00pci_resume,
1683 };
1684
1685 static int __init rt2400pci_init(void)
1686 {
1687         return pci_register_driver(&rt2400pci_driver);
1688 }
1689
1690 static void __exit rt2400pci_exit(void)
1691 {
1692         pci_unregister_driver(&rt2400pci_driver);
1693 }
1694
1695 module_init(rt2400pci_init);
1696 module_exit(rt2400pci_exit);