[PATCH] Orinoco: don't set channel in managed mode

[linux-2.6] / drivers / net / wireless / orinoco.c

/* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c)
 *
 * A driver for Hermes or Prism 2 chipset based PCMCIA wireless
 * adaptors, with Lucent/Agere, Intersil or Symbol firmware.
 *
 * Current maintainers (as of 29 September 2003) are:
 *      Pavel Roskin <proski AT gnu.org>
 * and  David Gibson <hermes AT gibson.dropbear.id.au>
 *
 * (C) Copyright David Gibson, IBM Corporation 2001-2003.
 * Copyright (C) 2000 David Gibson, Linuxcare Australia.
 *      With some help from :
 * Copyright (C) 2001 Jean Tourrilhes, HP Labs
 * Copyright (C) 2001 Benjamin Herrenschmidt
 *
 * Based on dummy_cs.c 1.27 2000/06/12 21:27:25
 *
 * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy
 * AT fasta.fh-dortmund.de>
 *      http://www.stud.fh-dortmund.de/~andy/wvlan/
 *
 * The contents of this file are subject to the Mozilla Public License
 * Version 1.1 (the "License"); you may not use this file except in
 * compliance with the License. You may obtain a copy of the License
 * at http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS"
 * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
 * the License for the specific language governing rights and
 * limitations under the License.
 *
 * The initial developer of the original code is David A. Hinds
 * <dahinds AT users.sourceforge.net>.  Portions created by David
 * A. Hinds are Copyright (C) 1999 David A. Hinds.  All Rights
 * Reserved.
 *
 * Alternatively, the contents of this file may be used under the
 * terms of the GNU General Public License version 2 (the "GPL"), in
 * which case the provisions of the GPL are applicable instead of the
 * above.  If you wish to allow the use of your version of this file
 * only under the terms of the GPL and not to allow others to use your
 * version of this file under the MPL, indicate your decision by
 * deleting the provisions above and replace them with the notice and
 * other provisions required by the GPL.  If you do not delete the
 * provisions above, a recipient may use your version of this file
 * under either the MPL or the GPL.  */

/*
 * v0.01 -> v0.02 - 21/3/2001 - Jean II
 *      o Allow to use regular ethX device name instead of dldwdX
 *      o Warning on IBSS with ESSID=any for firmware 6.06
 *      o Put proper range.throughput values (optimistic)
 *      o IWSPY support (IOCTL and stat gather in Rx path)
 *      o Allow setting frequency in Ad-Hoc mode
 *      o Disable WEP setting if !has_wep to work on old firmware
 *      o Fix txpower range
 *      o Start adding support for Samsung/Compaq firmware
 *
 * v0.02 -> v0.03 - 23/3/2001 - Jean II
 *      o Start adding Symbol support - need to check all that
 *      o Fix Prism2/Symbol WEP to accept 128 bits keys
 *      o Add Symbol WEP (add authentication type)
 *      o Add Prism2/Symbol rate
 *      o Add PM timeout (holdover duration)
 *      o Enable "iwconfig eth0 key off" and friends (toggle flags)
 *      o Enable "iwconfig eth0 power unicast/all" (toggle flags)
 *      o Try with an Intel card. It report firmware 1.01, behave like
 *        an antiquated firmware, however on windows it says 2.00. Yuck !
 *      o Workaround firmware bug in allocate buffer (Intel 1.01)
 *      o Finish external renaming to orinoco...
 *      o Testing with various Wavelan firmwares
 *
 * v0.03 -> v0.04 - 30/3/2001 - Jean II
 *      o Update to Wireless 11 -> add retry limit/lifetime support
 *      o Tested with a D-Link DWL 650 card, fill in firmware support
 *      o Warning on Vcc mismatch (D-Link 3.3v card in Lucent 5v only slot)
 *      o Fixed the Prism2 WEP bugs that I introduced in v0.03 :-(
 *        It works on D-Link *only* after a tcpdump. Weird...
 *        And still doesn't work on Intel card. Grrrr...
 *      o Update the mode after a setport3
 *      o Add preamble setting for Symbol cards (not yet enabled)
 *      o Don't complain as much about Symbol cards...
 *
 * v0.04 -> v0.04b - 22/4/2001 - David Gibson
 *      o Removed the 'eth' parameter - always use ethXX as the
 *        interface name instead of dldwdXX.  The other was racy
 *        anyway.
 *      o Clean up RID definitions in hermes.h, other cleanups
 *
 * v0.04b -> v0.04c - 24/4/2001 - Jean II
 *      o Tim Hurley <timster AT seiki.bliztech.com> reported a D-Link card
 *        with vendor 02 and firmware 0.08. Added in the capabilities...
 *      o Tested Lucent firmware 7.28, everything works...
 *
 * v0.04c -> v0.05 - 3/5/2001 - Benjamin Herrenschmidt
 *      o Spin-off Pcmcia code. This file is renamed orinoco.c,
 *        and orinoco_cs.c now contains only the Pcmcia specific stuff
 *      o Add Airport driver support on top of orinoco.c (see airport.c)
 *
 * v0.05 -> v0.05a - 4/5/2001 - Jean II
 *      o Revert to old Pcmcia code to fix breakage of Ben's changes...
 *
 * v0.05a -> v0.05b - 4/5/2001 - Jean II
 *      o add module parameter 'ignore_cis_vcc' for D-Link @ 5V
 *      o D-Link firmware doesn't support multicast. We just print a few
 *        error messages, but otherwise everything works...
 *      o For David : set/getport3 works fine, just upgrade iwpriv...
 *
 * v0.05b -> v0.05c - 5/5/2001 - Benjamin Herrenschmidt
 *      o Adapt airport.c to latest changes in orinoco.c
 *      o Remove deferred power enabling code
 *
 * v0.05c -> v0.05d - 5/5/2001 - Jean II
 *      o Workaround to SNAP decapsulate frame from Linksys AP
 *        original patch from : Dong Liu <dliu AT research.bell-labs.com>
 *        (note : the memcmp bug was mine - fixed)
 *      o Remove set_retry stuff, no firmware support it (bloat--).
 *
 * v0.05d -> v0.06 - 25/5/2001 - Jean II
 *              Original patch from "Hong Lin" <alin AT redhat.com>,
 *              "Ian Kinner" <ikinner AT redhat.com>
 *              and "David Smith" <dsmith AT redhat.com>
 *      o Init of priv->tx_rate_ctrl in firmware specific section.
 *      o Prism2/Symbol rate, upto should be 0xF and not 0x15. Doh !
 *      o Spectrum card always need cor_reset (for every reset)
 *      o Fix cor_reset to not lose bit 7 in the register
 *      o flush_stale_links to remove zombie Pcmcia instances
 *      o Ack previous hermes event before reset
 *              Me (with my little hands)
 *      o Allow orinoco.c to call cor_reset via priv->card_reset_handler
 *      o Add priv->need_card_reset to toggle this feature
 *      o Fix various buglets when setting WEP in Symbol firmware
 *        Now, encryption is fully functional on Symbol cards. Youpi !
 *
 * v0.06 -> v0.06b - 25/5/2001 - Jean II
 *      o IBSS on Symbol use port_mode = 4. Please don't ask...
 *
 * v0.06b -> v0.06c - 29/5/2001 - Jean II
 *      o Show first spy address in /proc/net/wireless for IBSS mode as well
 *
 * v0.06c -> v0.06d - 6/7/2001 - David Gibson
 *      o Change a bunch of KERN_INFO messages to KERN_DEBUG, as per Linus'
 *        wishes to reduce the number of unnecessary messages.
 *      o Removed bogus message on CRC error.
 *      o Merged fixes for v0.08 Prism 2 firmware from William Waghorn
 *        <willwaghorn AT yahoo.co.uk>
 *      o Slight cleanup/re-arrangement of firmware detection code.
 *
 * v0.06d -> v0.06e - 1/8/2001 - David Gibson
 *      o Removed some redundant global initializers (orinoco_cs.c).
 *      o Added some module metadata
 *
 * v0.06e -> v0.06f - 14/8/2001 - David Gibson
 *      o Wording fix to license
 *      o Added a 'use_alternate_encaps' module parameter for APs which need an
 *        oui of 00:00:00.  We really need a better way of handling this, but
 *        the module flag is better than nothing for now.
 *
 * v0.06f -> v0.07 - 20/8/2001 - David Gibson
 *      o Removed BAP error retries from hermes_bap_seek().  For Tx we now
 *        let the upper layers handle the retry, we retry explicitly in the
 *        Rx path, but don't make as much noise about it.
 *      o Firmware detection cleanups.
 *
 * v0.07 -> v0.07a - 1/10/3001 - Jean II
 *      o Add code to read Symbol firmware revision, inspired by latest code
 *        in Spectrum24 by Lee John Keyser-Allen - Thanks Lee !
 *      o Thanks to Jared Valentine <hidden AT xmission.com> for "providing" me
 *        a 3Com card with a recent firmware, fill out Symbol firmware
 *        capabilities of latest rev (2.20), as well as older Symbol cards.
 *      o Disable Power Management in newer Symbol firmware, the API 
 *        has changed (documentation needed).
 *
 * v0.07a -> v0.08 - 3/10/2001 - David Gibson
 *      o Fixed a possible buffer overrun found by the Stanford checker (in
 *        dldwd_ioctl_setiwencode()).  Can only be called by root anyway, so not
 *        a big problem.
 *      o Turned has_big_wep on for Intersil cards.  That's not true for all of
 *        them but we should at least let the capable ones try.
 *      o Wait for BUSY to clear at the beginning of hermes_bap_seek().  I
 *        realized that my assumption that the driver's serialization
 *        would prevent the BAP being busy on entry was possibly false, because
 *        things other than seeks may make the BAP busy.
 *      o Use "alternate" (oui 00:00:00) encapsulation by default.
 *        Setting use_old_encaps will mimic the old behaviour, but I think we
 *        will be able to eliminate this.
 *      o Don't try to make __initdata const (the version string).  This can't
 *        work because of the way the __initdata sectioning works.
 *      o Added MODULE_LICENSE tags.
 *      o Support for PLX (transparent PCMCIA->PCI bridge) cards.
 *      o Changed to using the new type-fascist min/max.
 *
 * v0.08 -> v0.08a - 9/10/2001 - David Gibson
 *      o Inserted some missing acknowledgements/info into the Changelog.
 *      o Fixed some bugs in the normalization of signal level reporting.
 *      o Fixed bad bug in WEP key handling on Intersil and Symbol firmware,
 *        which led to an instant crash on big-endian machines.
 *
 * v0.08a -> v0.08b - 20/11/2001 - David Gibson
 *      o Lots of cleanup and bugfixes in orinoco_plx.c
 *      o Cleanup to handling of Tx rate setting.
 *      o Removed support for old encapsulation method.
 *      o Removed old "dldwd" names.
 *      o Split RID constants into a new file hermes_rid.h
 *      o Renamed RID constants to match linux-wlan-ng and prism2.o
 *      o Bugfixes in hermes.c
 *      o Poke the PLX's INTCSR register, so it actually starts
 *        generating interrupts.  These cards might actually work now.
 *      o Update to wireless extensions v12 (Jean II)
 *      o Support for tallies and inquire command (Jean II)
 *      o Airport updates for newer PPC kernels (BenH)
 *
 * v0.08b -> v0.09 - 21/12/2001 - David Gibson
 *      o Some new PCI IDs for PLX cards.
 *      o Removed broken attempt to do ALLMULTI reception.  Just use
 *        promiscuous mode instead
 *      o Preliminary work for list-AP (Jean II)
 *      o Airport updates from (BenH)
 *      o Eliminated racy hw_ready stuff
 *      o Fixed generation of fake events in irq handler.  This should
 *        finally kill the EIO problems (Jean II & dgibson)
 *      o Fixed breakage of bitrate set/get on Agere firmware (Jean II)
 *
 * v0.09 -> v0.09a - 2/1/2002 - David Gibson
 *      o Fixed stupid mistake in multicast list handling, triggering
 *        a BUG()
 *
 * v0.09a -> v0.09b - 16/1/2002 - David Gibson
 *      o Fixed even stupider mistake in new interrupt handling, which
 *        seriously broke things on big-endian machines.
 *      o Removed a bunch of redundant includes and exports.
 *      o Removed a redundant MOD_{INC,DEC}_USE_COUNT pair in airport.c
 *      o Don't attempt to do hardware level multicast reception on
 *        Intersil firmware, just go promisc instead.
 *      o Typo fixed in hermes_issue_cmd()
 *      o Eliminated WIRELESS_SPY #ifdefs
 *      o Status code reported on Tx exceptions
 *      o Moved netif_wake_queue() from ALLOC interrupts to TX and TXEXC
 *        interrupts, which should fix the timeouts we're seeing.
 *
 * v0.09b -> v0.10 - 25 Feb 2002 - David Gibson
 *      o Removed nested structures used for header parsing, so the
 *        driver should now work without hackery on ARM
 *      o Fix for WEP handling on Intersil (Hawk Newton)
 *      o Eliminated the /proc/hermes/ethXX/regs debugging file.  It
 *        was never very useful.
 *      o Make Rx errors less noisy.
 *
 * v0.10 -> v0.11 - 5 Apr 2002 - David Gibson
 *      o Laid the groundwork in hermes.[ch] for devices which map
 *        into PCI memory space rather than IO space.
 *      o Fixed bug in multicast handling (cleared multicast list when
 *        leaving promiscuous mode).
 *      o Relegated Tx error messages to debug.
 *      o Cleaned up / corrected handling of allocation lengths.
 *      o Set OWNSSID in IBSS mode for WinXP interoperability (jimc).
 *      o Change to using alloc_etherdev() for structure allocations. 
 *      o Check for and drop undersized packets.
 *      o Fixed a race in stopping/waking the queue.  This should fix
 *        the timeout problems (Pavel Roskin)
 *      o Reverted to netif_wake_queue() on the ALLOC event.
 *      o Fixes for recent Symbol firmwares which lack AP density
 *        (Pavel Roskin).
 *
 * v0.11 -> v0.11a - 29 Apr 2002 - David Gibson
 *      o Handle different register spacing, necessary for Prism 2.5
 *        PCI adaptors (Steve Hill).
 *      o Cleaned up initialization of card structures in orinoco_cs
 *        and airport.  Removed card->priv field.
 *      o Make response structure optional for hermes_docmd_wait()
 *        Pavel Roskin)
 *      o Added PCI id for Nortel emobility to orinoco_plx.c.
 *      o Cleanup to handling of Symbol's allocation bug. (Pavel Roskin)
 *      o Cleanups to firmware capability detection.
 *      o Arrange for orinoco_pci.c to override firmware detection.
 *        We should be able to support the PCI Intersil cards now.
 *      o Cleanup handling of reset_cor and hard_reset (Pavel Roskin).
 *      o Remove erroneous use of USER_BAP in the TxExc handler (Jouni
 *        Malinen).
 *      o Makefile changes for better integration into David Hinds
 *        pcmcia-cs package.
 *
 * v0.11a -> v0.11b - 1 May 2002 - David Gibson
 *      o Better error reporting in orinoco_plx_init_one()
 *      o Fixed multiple bad kfree() bugs introduced by the
 *        alloc_orinocodev() changes.
 *
 * v0.11b -> v0.12 - 19 Jun 2002 - David Gibson
 *      o Support changing the MAC address.
 *      o Correct display of Intersil firmware revision numbers.
 *      o Entirely revised locking scheme.  Should be both simpler and
 *         better.
 *      o Merged some common code in orinoco_plx, orinoco_pci and
 *        airport by creating orinoco_default_{open,stop,reset}()
 *        which are used as the dev->open, dev->stop, priv->reset
 *        callbacks if none are specified when alloc_orinocodev() is
 *        called.
 *      o Removed orinoco_plx_interrupt() and orinoco_pci_interrupt().
 *        They didn't do anything.
 *
 * v0.12 -> v0.12a - 4 Jul 2002 - David Gibson
 *      o Some rearrangement of code.
 *      o Numerous fixups to locking and rest handling, particularly
 *        for PCMCIA.
 *      o This allows open and stop net_device methods to be in
 *        orinoco.c now, rather than in the init modules.
 *      o In orinoco_cs.c link->priv now points to the struct
 *        net_device not to the struct orinoco_private.
 *      o Added a check for undersized SNAP frames, which could cause
 *        crashes.
 *
 * v0.12a -> v0.12b - 11 Jul 2002 - David Gibson
 *      o Fix hw->num_init testing code, so num_init is actually
 *        incremented.
 *      o Fix very stupid bug in orinoco_cs which broke compile with
 *        CONFIG_SMP.
 *      o Squashed a warning.
 *
 * v0.12b -> v0.12c - 26 Jul 2002 - David Gibson
 *      o Change to C9X style designated initializers.
 *      o Add support for 3Com AirConnect PCI.
 *      o No longer ignore the hard_reset argument to
 *        alloc_orinocodev().  Oops.
 *
 * v0.12c -> v0.13beta1 - 13 Sep 2002 - David Gibson
 *      o Revert the broken 0.12* locking scheme and go to a new yet
 *        simpler scheme.
 *      o Do firmware resets only in orinoco_init() and when waking
 *        the card from hard sleep.
 *
 * v0.13beta1 -> v0.13 - 27 Sep 2002 - David Gibson
 *      o Re-introduced full resets (via schedule_task()) on Tx
 *        timeout.
 *
 * v0.13 -> v0.13a - 30 Sep 2002 - David Gibson
 *      o Minor cleanups to info frame handling.  Add basic support
 *        for linkstatus info frames.
 *      o Include required kernel headers in orinoco.h, to avoid
 *        compile problems.
 *
 * v0.13a -> v0.13b - 10 Feb 2003 - David Gibson
 *      o Implemented hard reset for Airport cards
 *      o Experimental suspend/resume implementation for orinoco_pci
 *      o Abolished /proc debugging support, replaced with a debugging
 *        iwpriv.  Now it's ugly and simple instead of ugly and complex.
 *      o Bugfix in hermes.c if the firmware returned a record length
 *        of 0, we could go clobbering memory.
 *      o Bugfix in orinoco_stop() - it used to fail if hw_unavailable
 *        was set, which was usually true on PCMCIA hot removes.
 *      o Track LINKSTATUS messages, silently drop Tx packets before
 *        we are connected (avoids confusing the firmware), and only
 *        give LINKSTATUS printk()s if the status has changed.
 *
 * v0.13b -> v0.13c - 11 Mar 2003 - David Gibson
 *      o Cleanup: use dev instead of priv in various places.
 *      o Bug fix: Don't ReleaseConfiguration on RESET_PHYSICAL event
 *        if we're in the middle of a (driver initiated) hard reset.
 *      o Bug fix: ETH_ZLEN is supposed to include the header
 *        (Dionysus Blazakis & Manish Karir)
 *      o Convert to using workqueues instead of taskqueues (and
 *        backwards compatibility macros for pre 2.5.41 kernels).
 *      o Drop redundant (I think...) MOD_{INC,DEC}_USE_COUNT in
 *        airport.c
 *      o New orinoco_tmd.c init module from Joerg Dorchain for
 *        TMD7160 based PCI to PCMCIA bridges (similar to
 *        orinoco_plx.c).
 *
 * v0.13c -> v0.13d - 22 Apr 2003 - David Gibson
 *      o Make hw_unavailable a counter, rather than just a flag, this
 *        is necessary to avoid some races (such as a card being
 *        removed in the middle of orinoco_reset().
 *      o Restore Release/RequestConfiguration in the PCMCIA event handler
 *        when dealing with a driver initiated hard reset.  This is
 *        necessary to prevent hangs due to a spurious interrupt while
 *        the reset is in progress.
 *      o Clear the 802.11 header when transmitting, even though we
 *        don't use it.  This fixes a long standing bug on some
 *        firmwares, which seem to get confused if that isn't done.
 *      o Be less eager to de-encapsulate SNAP frames, only do so if
 *        the OUI is 00:00:00 or 00:00:f8, leave others alone.  The old
 *        behaviour broke CDP (Cisco Discovery Protocol).
 *      o Use dev instead of priv for free_irq() as well as
 *        request_irq() (oops).
 *      o Attempt to reset rather than giving up if we get too many
 *        IRQs.
 *      o Changed semantics of __orinoco_down() so it can be called
 *        safely with hw_unavailable set.  It also now clears the
 *        linkstatus (since we're going to have to reassociate).
 *
 * v0.13d -> v0.13e - 12 May 2003 - David Gibson
 *      o Support for post-2.5.68 return values from irq handler.
 *      o Fixed bug where underlength packets would be double counted
 *        in the rx_dropped statistics.
 *      o Provided a module parameter to suppress linkstatus messages.
 *
 * v0.13e -> v0.14alpha1 - 30 Sep 2003 - David Gibson
 *      o Replaced priv->connected logic with netif_carrier_on/off()
 *        calls.
 *      o Remove has_ibss_any and never set the CREATEIBSS RID when
 *        the ESSID is empty.  Too many firmwares break if we do.
 *      o 2.6 merges: Replace pdev->slot_name with pci_name(), remove
 *        __devinitdata from PCI ID tables, use free_netdev().
 *      o Enabled shared-key authentication for Agere firmware (from
 *        Robert J. Moore <Robert.J.Moore AT allanbank.com>
 *      o Move netif_wake_queue() (back) to the Tx completion from the
 *        ALLOC event.  This seems to prevent/mitigate the rolling
 *        error -110 problems at least on some Intersil firmwares.
 *        Theoretically reduces performance, but I can't measure it.
 *        Patch from Andrew Tridgell <tridge AT samba.org>
 *
 * v0.14alpha1 -> v0.14alpha2 - 20 Oct 2003 - David Gibson
 *      o Correctly turn off shared-key authentication when requested
 *        (bugfix from Robert J. Moore).
 *      o Correct airport sleep interfaces for current 2.6 kernels.
 *      o Add code for key change without disabling/enabling the MAC
 *        port.  This is supposed to allow 802.1x to work sanely, but
 *        doesn't seem to yet.
 *
 * TODO
 *      o New wireless extensions API (patch from Moustafa
 *        Youssef, updated by Jim Carter and Pavel Roskin).
 *      o Handle de-encapsulation within network layer, provide 802.11
 *        headers (patch from Thomas 'Dent' Mirlacher)
 *      o RF monitor mode support
 *      o Fix possible races in SPY handling.
 *      o Disconnect wireless extensions from fundamental configuration.
 *      o (maybe) Software WEP support (patch from Stano Meduna).
 *      o (maybe) Use multiple Tx buffers - driver handling queue
 *        rather than firmware.
 */

/* Locking and synchronization:
 *
 * The basic principle is that everything is serialized through a
 * single spinlock, priv->lock.  The lock is used in user, bh and irq
 * context, so when taken outside hardirq context it should always be
 * taken with interrupts disabled.  The lock protects both the
 * hardware and the struct orinoco_private.
 *
 * Another flag, priv->hw_unavailable indicates that the hardware is
 * unavailable for an extended period of time (e.g. suspended, or in
 * the middle of a hard reset).  This flag is protected by the
 * spinlock.  All code which touches the hardware should check the
 * flag after taking the lock, and if it is set, give up on whatever
 * they are doing and drop the lock again.  The orinoco_lock()
 * function handles this (it unlocks and returns -EBUSY if
 * hw_unavailable is non-zero).
 */

#define DRIVER_NAME "orinoco"

#include <linux/config.h>

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/ioport.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/wireless.h>

#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/system.h>

#include "hermes.h"
#include "hermes_rid.h"
#include "orinoco.h"
#include "ieee802_11.h"

/********************************************************************/
/* Module information                                               */
/********************************************************************/

MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards");
MODULE_LICENSE("Dual MPL/GPL");

/* Level of debugging. Used in the macros in orinoco.h */
#ifdef ORINOCO_DEBUG
int orinoco_debug = ORINOCO_DEBUG;
module_param(orinoco_debug, int, 0644);
MODULE_PARM_DESC(orinoco_debug, "Debug level");
EXPORT_SYMBOL(orinoco_debug);
#endif

static int suppress_linkstatus; /* = 0 */
module_param(suppress_linkstatus, bool, 0644);
MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes");
static int ignore_disconnect; /* = 0 */
module_param(ignore_disconnect, int, 0644);
MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer");

/********************************************************************/
/* Compile time configuration and compatibility stuff               */
/********************************************************************/

/* We do this this way to avoid ifdefs in the actual code */
#ifdef WIRELESS_SPY
#define SPY_NUMBER(priv)        (priv->spy_number)
#else
#define SPY_NUMBER(priv)        0
#endif /* WIRELESS_SPY */

/********************************************************************/
/* Internal constants                                               */
/********************************************************************/

#define ORINOCO_MIN_MTU         256
#define ORINOCO_MAX_MTU         (IEEE802_11_DATA_LEN - ENCAPS_OVERHEAD)

#define SYMBOL_MAX_VER_LEN      (14)
#define USER_BAP                0
#define IRQ_BAP                 1
#define MAX_IRQLOOPS_PER_IRQ    10
#define MAX_IRQLOOPS_PER_JIFFY  (20000/HZ) /* Based on a guestimate of
                                            * how many events the
                                            * device could
                                            * legitimately generate */
#define SMALL_KEY_SIZE          5
#define LARGE_KEY_SIZE          13
#define TX_NICBUF_SIZE_BUG      1585            /* Bug in Symbol firmware */

#define DUMMY_FID               0xFFFF

/*#define MAX_MULTICAST(priv)   (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \
  HERMES_MAX_MULTICAST : 0)*/
#define MAX_MULTICAST(priv)     (HERMES_MAX_MULTICAST)

#define ORINOCO_INTEN           (HERMES_EV_RX | HERMES_EV_ALLOC \
                                 | HERMES_EV_TX | HERMES_EV_TXEXC \
                                 | HERMES_EV_WTERR | HERMES_EV_INFO \
                                 | HERMES_EV_INFDROP )

/********************************************************************/
/* Data tables                                                      */
/********************************************************************/

/* The frequency of each channel in MHz */
static const long channel_frequency[] = {
        2412, 2417, 2422, 2427, 2432, 2437, 2442,
        2447, 2452, 2457, 2462, 2467, 2472, 2484
};
#define NUM_CHANNELS ARRAY_SIZE(channel_frequency)

/* This tables gives the actual meanings of the bitrate IDs returned
 * by the firmware. */
static struct {
        int bitrate; /* in 100s of kilobits */
        int automatic;
        u16 agere_txratectrl;
        u16 intersil_txratectrl;
} bitrate_table[] = {
        {110, 1,  3, 15}, /* Entry 0 is the default */
        {10,  0,  1,  1},
        {10,  1,  1,  1},
        {20,  0,  2,  2},
        {20,  1,  6,  3},
        {55,  0,  4,  4},
        {55,  1,  7,  7},
        {110, 0,  5,  8},
};
#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table)

/********************************************************************/
/* Data types                                                       */
/********************************************************************/

struct header_struct {
        /* 802.3 */
        u8 dest[ETH_ALEN];
        u8 src[ETH_ALEN];
        u16 len;
        /* 802.2 */
        u8 dsap;
        u8 ssap;
        u8 ctrl;
        /* SNAP */
        u8 oui[3];
        u16 ethertype;
} __attribute__ ((packed));

/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};

#define ENCAPS_OVERHEAD         (sizeof(encaps_hdr) + 2)

struct hermes_rx_descriptor {
        u16 status;
        u32 time;
        u8 silence;
        u8 signal;
        u8 rate;
        u8 rxflow;
        u32 reserved;
} __attribute__ ((packed));

/********************************************************************/
/* Function prototypes                                              */
/********************************************************************/

static int orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static int __orinoco_program_rids(struct net_device *dev);
static void __orinoco_set_multicast_list(struct net_device *dev);

/********************************************************************/
/* Internal helper functions                                        */
/********************************************************************/

static inline void set_port_type(struct orinoco_private *priv)
{
        switch (priv->iw_mode) {
        case IW_MODE_INFRA:
                priv->port_type = 1;
                priv->createibss = 0;
                break;
        case IW_MODE_ADHOC:
                if (priv->prefer_port3) {
                        priv->port_type = 3;
                        priv->createibss = 0;
                } else {
                        priv->port_type = priv->ibss_port;
                        priv->createibss = 1;
                }
                break;
        default:
                printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n",
                       priv->ndev->name);
        }
}

/********************************************************************/
/* Device methods                                                   */
/********************************************************************/

static int orinoco_open(struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        unsigned long flags;
        int err;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        err = __orinoco_up(dev);

        if (! err)
                priv->open = 1;

        orinoco_unlock(priv, &flags);

        return err;
}

int orinoco_stop(struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        int err = 0;

        /* We mustn't use orinoco_lock() here, because we need to be
           able to close the interface even if hw_unavailable is set
           (e.g. as we're released after a PC Card removal) */
        spin_lock_irq(&priv->lock);

        priv->open = 0;

        err = __orinoco_down(dev);

        spin_unlock_irq(&priv->lock);

        return err;
}

static struct net_device_stats *orinoco_get_stats(struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        
        return &priv->stats;
}

static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        hermes_t *hw = &priv->hw;
        struct iw_statistics *wstats = &priv->wstats;
        int err;
        unsigned long flags;

        if (! netif_device_present(dev)) {
                printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n",
                       dev->name);
                return NULL; /* FIXME: Can we do better than this? */
        }

        /* If busy, return the old stats.  Returning NULL may cause
         * the interface to disappear from /proc/net/wireless */
        if (orinoco_lock(priv, &flags) != 0)
                return wstats;

        /* We can't really wait for the tallies inquiry command to
         * complete, so we just use the previous results and trigger
         * a new tallies inquiry command for next time - Jean II */
        /* FIXME: Really we should wait for the inquiry to come back -
         * as it is the stats we give don't make a whole lot of sense.
         * Unfortunately, it's not clear how to do that within the
         * wireless extensions framework: I think we're in user
         * context, but a lock seems to be held by the time we get in
         * here so we're not safe to sleep here. */
        hermes_inquire(hw, HERMES_INQ_TALLIES);

        if (priv->iw_mode == IW_MODE_ADHOC) {
                memset(&wstats->qual, 0, sizeof(wstats->qual));
                /* If a spy address is defined, we report stats of the
                 * first spy address - Jean II */
                if (SPY_NUMBER(priv)) {
                        wstats->qual.qual = priv->spy_stat[0].qual;
                        wstats->qual.level = priv->spy_stat[0].level;
                        wstats->qual.noise = priv->spy_stat[0].noise;
                        wstats->qual.updated = priv->spy_stat[0].updated;
                }
        } else {
                struct {
                        u16 qual, signal, noise;
                } __attribute__ ((packed)) cq;

                err = HERMES_READ_RECORD(hw, USER_BAP,
                                         HERMES_RID_COMMSQUALITY, &cq);

                if (!err) {
                        wstats->qual.qual = (int)le16_to_cpu(cq.qual);
                        wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
                        wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
                        wstats->qual.updated = 7;
                }
        }

        orinoco_unlock(priv, &flags);
        return wstats;
}

static void orinoco_set_multicast_list(struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0) {
                printk(KERN_DEBUG "%s: orinoco_set_multicast_list() "
                       "called when hw_unavailable\n", dev->name);
                return;
        }

        __orinoco_set_multicast_list(dev);
        orinoco_unlock(priv, &flags);
}

static int orinoco_change_mtu(struct net_device *dev, int new_mtu)
{
        struct orinoco_private *priv = netdev_priv(dev);

        if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) )
                return -EINVAL;

        if ( (new_mtu + ENCAPS_OVERHEAD + IEEE802_11_HLEN) >
             (priv->nicbuf_size - ETH_HLEN) )
                return -EINVAL;

        dev->mtu = new_mtu;

        return 0;
}

/********************************************************************/
/* Tx path                                                          */
/********************************************************************/

static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        struct net_device_stats *stats = &priv->stats;
        hermes_t *hw = &priv->hw;
        int err = 0;
        u16 txfid = priv->txfid;
        char *p;
        struct ethhdr *eh;
        int len, data_len, data_off;
        struct hermes_tx_descriptor desc;
        unsigned long flags;

        TRACE_ENTER(dev->name);

        if (! netif_running(dev)) {
                printk(KERN_ERR "%s: Tx on stopped device!\n",
                       dev->name);
                TRACE_EXIT(dev->name);
                return 1;
        }
        
        if (netif_queue_stopped(dev)) {
                printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", 
                       dev->name);
                TRACE_EXIT(dev->name);
                return 1;
        }
        
        if (orinoco_lock(priv, &flags) != 0) {
                printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n",
                       dev->name);
                TRACE_EXIT(dev->name);
                return 1;
        }

        if (! netif_carrier_ok(dev)) {
                /* Oops, the firmware hasn't established a connection,
                   silently drop the packet (this seems to be the
                   safest approach). */
                stats->tx_errors++;
                orinoco_unlock(priv, &flags);
                dev_kfree_skb(skb);
                TRACE_EXIT(dev->name);
                return 0;
        }

        /* Length of the packet body */
        /* FIXME: what if the skb is smaller than this? */
        len = max_t(int,skb->len - ETH_HLEN, ETH_ZLEN - ETH_HLEN);

        eh = (struct ethhdr *)skb->data;

        memset(&desc, 0, sizeof(desc));
        desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX);
        err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0);
        if (err) {
                if (net_ratelimit())
                        printk(KERN_ERR "%s: Error %d writing Tx descriptor "
                               "to BAP\n", dev->name, err);
                stats->tx_errors++;
                goto fail;
        }

        /* Clear the 802.11 header and data length fields - some
         * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
         * if this isn't done. */
        hermes_clear_words(hw, HERMES_DATA0,
                           HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);

        /* Encapsulate Ethernet-II frames */
        if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
                struct header_struct hdr;
                data_len = len;
                data_off = HERMES_802_3_OFFSET + sizeof(hdr);
                p = skb->data + ETH_HLEN;

                /* 802.3 header */
                memcpy(hdr.dest, eh->h_dest, ETH_ALEN);
                memcpy(hdr.src, eh->h_source, ETH_ALEN);
                hdr.len = htons(data_len + ENCAPS_OVERHEAD);
                
                /* 802.2 header */
                memcpy(&hdr.dsap, &encaps_hdr, sizeof(encaps_hdr));
                        
                hdr.ethertype = eh->h_proto;
                err  = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr),
                                         txfid, HERMES_802_3_OFFSET);
                if (err) {
                        if (net_ratelimit())
                                printk(KERN_ERR "%s: Error %d writing packet "
                                       "header to BAP\n", dev->name, err);
                        stats->tx_errors++;
                        goto fail;
                }
        } else { /* IEEE 802.3 frame */
                data_len = len + ETH_HLEN;
                data_off = HERMES_802_3_OFFSET;
                p = skb->data;
        }

        /* Round up for odd length packets */
        err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2),
                                txfid, data_off);
        if (err) {
                printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
                       dev->name, err);
                stats->tx_errors++;
                goto fail;
        }

        /* Finally, we actually initiate the send */
        netif_stop_queue(dev);

        err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
                                txfid, NULL);
        if (err) {
                netif_start_queue(dev);
                printk(KERN_ERR "%s: Error %d transmitting packet\n",
                       dev->name, err);
                stats->tx_errors++;
                goto fail;
        }

        dev->trans_start = jiffies;
        stats->tx_bytes += data_off + data_len;

        orinoco_unlock(priv, &flags);

        dev_kfree_skb(skb);

        TRACE_EXIT(dev->name);

        return 0;
 fail:
        TRACE_EXIT(dev->name);

        orinoco_unlock(priv, &flags);
        return err;
}

static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw)
{
        struct orinoco_private *priv = netdev_priv(dev);
        u16 fid = hermes_read_regn(hw, ALLOCFID);

        if (fid != priv->txfid) {
                if (fid != DUMMY_FID)
                        printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n",
                               dev->name, fid);
                return;
        }

        hermes_write_regn(hw, ALLOCFID, DUMMY_FID);
}

static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw)
{
        struct orinoco_private *priv = netdev_priv(dev);
        struct net_device_stats *stats = &priv->stats;

        stats->tx_packets++;

        netif_wake_queue(dev);

        hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
}

static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw)
{
        struct orinoco_private *priv = netdev_priv(dev);
        struct net_device_stats *stats = &priv->stats;
        u16 fid = hermes_read_regn(hw, TXCOMPLFID);
        struct hermes_tx_descriptor desc;
        int err = 0;

        if (fid == DUMMY_FID)
                return; /* Nothing's really happened */

        err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), fid, 0);
        if (err) {
                printk(KERN_WARNING "%s: Unable to read descriptor on Tx error "
                       "(FID=%04X error %d)\n",
                       dev->name, fid, err);
        } else {
                DEBUG(1, "%s: Tx error, status %d\n",
                      dev->name, le16_to_cpu(desc.status));
        }
        
        stats->tx_errors++;

        netif_wake_queue(dev);
        hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
}

static void orinoco_tx_timeout(struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        struct net_device_stats *stats = &priv->stats;
        struct hermes *hw = &priv->hw;

        printk(KERN_WARNING "%s: Tx timeout! "
               "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n",
               dev->name, hermes_read_regn(hw, ALLOCFID),
               hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT));

        stats->tx_errors++;

        schedule_work(&priv->reset_work);
}

/********************************************************************/
/* Rx path (data frames)                                            */
/********************************************************************/

/* Does the frame have a SNAP header indicating it should be
 * de-encapsulated to Ethernet-II? */
static inline int is_ethersnap(void *_hdr)
{
        u8 *hdr = _hdr;

        /* We de-encapsulate all packets which, a) have SNAP headers
         * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header
         * and where b) the OUI of the SNAP header is 00:00:00 or
         * 00:00:f8 - we need both because different APs appear to use
         * different OUIs for some reason */
        return (memcmp(hdr, &encaps_hdr, 5) == 0)
                && ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) );
}

static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac,
                                      int level, int noise)
{
        struct orinoco_private *priv = netdev_priv(dev);
        int i;

        /* Gather wireless spy statistics: for each packet, compare the
         * source address with out list, and if match, get the stats... */
        for (i = 0; i < priv->spy_number; i++)
                if (!memcmp(mac, priv->spy_address[i], ETH_ALEN)) {
                        priv->spy_stat[i].level = level - 0x95;
                        priv->spy_stat[i].noise = noise - 0x95;
                        priv->spy_stat[i].qual = (level > noise) ? (level - noise) : 0;
                        priv->spy_stat[i].updated = 7;
                }
}

static void orinoco_stat_gather(struct net_device *dev,
                                struct sk_buff *skb,
                                struct hermes_rx_descriptor *desc)
{
        struct orinoco_private *priv = netdev_priv(dev);

        /* Using spy support with lots of Rx packets, like in an
         * infrastructure (AP), will really slow down everything, because
         * the MAC address must be compared to each entry of the spy list.
         * If the user really asks for it (set some address in the
         * spy list), we do it, but he will pay the price.
         * Note that to get here, you need both WIRELESS_SPY
         * compiled in AND some addresses in the list !!!
         */
        /* Note : gcc will optimise the whole section away if
         * WIRELESS_SPY is not defined... - Jean II */
        if (SPY_NUMBER(priv)) {
                orinoco_spy_gather(dev, skb->mac.raw + ETH_ALEN,
                                   desc->signal, desc->silence);
        }
}

static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
{
        struct orinoco_private *priv = netdev_priv(dev);
        struct net_device_stats *stats = &priv->stats;
        struct iw_statistics *wstats = &priv->wstats;
        struct sk_buff *skb = NULL;
        u16 rxfid, status;
        int length, data_len, data_off;
        char *p;
        struct hermes_rx_descriptor desc;
        struct header_struct hdr;
        struct ethhdr *eh;
        int err;

        rxfid = hermes_read_regn(hw, RXFID);

        err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc),
                               rxfid, 0);
        if (err) {
                printk(KERN_ERR "%s: error %d reading Rx descriptor. "
                       "Frame dropped.\n", dev->name, err);
                stats->rx_errors++;
                goto drop;
        }

        status = le16_to_cpu(desc.status);

        if (status & HERMES_RXSTAT_ERR) {
                if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
                        wstats->discard.code++;
                        DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
                               dev->name);
                } else {
                        stats->rx_crc_errors++;
                        DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name);
                }
                stats->rx_errors++;
                goto drop;
        }

        /* For now we ignore the 802.11 header completely, assuming
           that the card's firmware has handled anything vital */

        err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(hdr),
                               rxfid, HERMES_802_3_OFFSET);
        if (err) {
                printk(KERN_ERR "%s: error %d reading frame header. "
                       "Frame dropped.\n", dev->name, err);
                stats->rx_errors++;
                goto drop;
        }

        length = ntohs(hdr.len);
        
        /* Sanity checks */
        if (length < 3) { /* No for even an 802.2 LLC header */
                /* At least on Symbol firmware with PCF we get quite a
                   lot of these legitimately - Poll frames with no
                   data. */
                stats->rx_dropped++;
                goto drop;
        }
        if (length > IEEE802_11_DATA_LEN) {
                printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
                       dev->name, length);
                stats->rx_length_errors++;
                stats->rx_errors++;
                goto drop;
        }

        /* We need space for the packet data itself, plus an ethernet
           header, plus 2 bytes so we can align the IP header on a
           32bit boundary, plus 1 byte so we can read in odd length
           packets from the card, which has an IO granularity of 16
           bits */  
        skb = dev_alloc_skb(length+ETH_HLEN+2+1);
        if (!skb) {
                printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
                       dev->name);
                goto drop;
        }

        skb_reserve(skb, 2); /* This way the IP header is aligned */

        /* Handle decapsulation
         * In most cases, the firmware tell us about SNAP frames.
         * For some reason, the SNAP frames sent by LinkSys APs
         * are not properly recognised by most firmwares.
         * So, check ourselves */
        if (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
            ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
            is_ethersnap(&hdr)) {
                /* These indicate a SNAP within 802.2 LLC within
                   802.11 frame which we'll need to de-encapsulate to
                   the original EthernetII frame. */

                if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */
                        stats->rx_length_errors++;
                        goto drop;
                }

                /* Remove SNAP header, reconstruct EthernetII frame */
                data_len = length - ENCAPS_OVERHEAD;
                data_off = HERMES_802_3_OFFSET + sizeof(hdr);

                eh = (struct ethhdr *)skb_put(skb, ETH_HLEN);

                memcpy(eh, &hdr, 2 * ETH_ALEN);
                eh->h_proto = hdr.ethertype;
        } else {
                /* All other cases indicate a genuine 802.3 frame.  No
                   decapsulation needed.  We just throw the whole
                   thing in, and hope the protocol layer can deal with
                   it as 802.3 */
                data_len = length;
                data_off = HERMES_802_3_OFFSET;
                /* FIXME: we re-read from the card data we already read here */
        }

        p = skb_put(skb, data_len);
        err = hermes_bap_pread(hw, IRQ_BAP, p, ALIGN(data_len, 2),
                               rxfid, data_off);
        if (err) {
                printk(KERN_ERR "%s: error %d reading frame. "
                       "Frame dropped.\n", dev->name, err);
                stats->rx_errors++;
                goto drop;
        }

        dev->last_rx = jiffies;
        skb->dev = dev;
        skb->protocol = eth_type_trans(skb, dev);
        skb->ip_summed = CHECKSUM_NONE;
        
        /* Process the wireless stats if needed */
        orinoco_stat_gather(dev, skb, &desc);

        /* Pass the packet to the networking stack */
        netif_rx(skb);
        stats->rx_packets++;
        stats->rx_bytes += length;

        return;

 drop:  
        stats->rx_dropped++;

        if (skb)
                dev_kfree_skb_irq(skb);
        return;
}

/********************************************************************/
/* Rx path (info frames)                                            */
/********************************************************************/

static void print_linkstatus(struct net_device *dev, u16 status)
{
        char * s;

        if (suppress_linkstatus)
                return;

        switch (status) {
        case HERMES_LINKSTATUS_NOT_CONNECTED:
                s = "Not Connected";
                break;
        case HERMES_LINKSTATUS_CONNECTED:
                s = "Connected";
                break;
        case HERMES_LINKSTATUS_DISCONNECTED:
                s = "Disconnected";
                break;
        case HERMES_LINKSTATUS_AP_CHANGE:
                s = "AP Changed";
                break;
        case HERMES_LINKSTATUS_AP_OUT_OF_RANGE:
                s = "AP Out of Range";
                break;
        case HERMES_LINKSTATUS_AP_IN_RANGE:
                s = "AP In Range";
                break;
        case HERMES_LINKSTATUS_ASSOC_FAILED:
                s = "Association Failed";
                break;
        default:
                s = "UNKNOWN";
        }
        
        printk(KERN_INFO "%s: New link status: %s (%04x)\n",
               dev->name, s, status);
}

static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
{
        struct orinoco_private *priv = netdev_priv(dev);
        u16 infofid;
        struct {
                u16 len;
                u16 type;
        } __attribute__ ((packed)) info;
        int len, type;
        int err;

        /* This is an answer to an INQUIRE command that we did earlier,
         * or an information "event" generated by the card
         * The controller return to us a pseudo frame containing
         * the information in question - Jean II */
        infofid = hermes_read_regn(hw, INFOFID);

        /* Read the info frame header - don't try too hard */
        err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info),
                               infofid, 0);
        if (err) {
                printk(KERN_ERR "%s: error %d reading info frame. "
                       "Frame dropped.\n", dev->name, err);
                return;
        }
        
        len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len));
        type = le16_to_cpu(info.type);

        switch (type) {
        case HERMES_INQ_TALLIES: {
                struct hermes_tallies_frame tallies;
                struct iw_statistics *wstats = &priv->wstats;
                
                if (len > sizeof(tallies)) {
                        printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n",
                               dev->name, len);
                        len = sizeof(tallies);
                }
                
                /* Read directly the data (no seek) */
                hermes_read_words(hw, HERMES_DATA1, (void *) &tallies,
                                  len / 2); /* FIXME: blech! */
                
                /* Increment our various counters */
                /* wstats->discard.nwid - no wrong BSSID stuff */
                wstats->discard.code +=
                        le16_to_cpu(tallies.RxWEPUndecryptable);
                if (len == sizeof(tallies))  
                        wstats->discard.code +=
                                le16_to_cpu(tallies.RxDiscards_WEPICVError) +
                                le16_to_cpu(tallies.RxDiscards_WEPExcluded);
                wstats->discard.misc +=
                        le16_to_cpu(tallies.TxDiscardsWrongSA);
                wstats->discard.fragment +=
                        le16_to_cpu(tallies.RxMsgInBadMsgFragments);
                wstats->discard.retries +=
                        le16_to_cpu(tallies.TxRetryLimitExceeded);
                /* wstats->miss.beacon - no match */
        }
        break;
        case HERMES_INQ_LINKSTATUS: {
                struct hermes_linkstatus linkstatus;
                u16 newstatus;
                int connected;

                if (len != sizeof(linkstatus)) {
                        printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n",
                               dev->name, len);
                        break;
                }

                hermes_read_words(hw, HERMES_DATA1, (void *) &linkstatus,
                                  len / 2);
                newstatus = le16_to_cpu(linkstatus.linkstatus);

                connected = (newstatus == HERMES_LINKSTATUS_CONNECTED)
                        || (newstatus == HERMES_LINKSTATUS_AP_CHANGE)
                        || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE);

                if (connected)
                        netif_carrier_on(dev);
                else if (!ignore_disconnect)
                        netif_carrier_off(dev);

                if (newstatus != priv->last_linkstatus)
                        print_linkstatus(dev, newstatus);

                priv->last_linkstatus = newstatus;
        }
        break;
        default:
                printk(KERN_DEBUG "%s: Unknown information frame received: "
                       "type 0x%04x, length %d\n", dev->name, type, len);
                /* We don't actually do anything about it */
                break;
        }
}

static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw)
{
        if (net_ratelimit())
                printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name);
}

/********************************************************************/
/* Internal hardware control routines                               */
/********************************************************************/

int __orinoco_up(struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        struct hermes *hw = &priv->hw;
        int err;

        err = __orinoco_program_rids(dev);
        if (err) {
                printk(KERN_ERR "%s: Error %d configuring card\n",
                       dev->name, err);
                return err;
        }

        /* Fire things up again */
        hermes_set_irqmask(hw, ORINOCO_INTEN);
        err = hermes_enable_port(hw, 0);
        if (err) {
                printk(KERN_ERR "%s: Error %d enabling MAC port\n",
                       dev->name, err);
                return err;
        }

        netif_start_queue(dev);

        return 0;
}

int __orinoco_down(struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        struct hermes *hw = &priv->hw;
        int err;

        netif_stop_queue(dev);

        if (! priv->hw_unavailable) {
                if (! priv->broken_disableport) {
                        err = hermes_disable_port(hw, 0);
                        if (err) {
                                /* Some firmwares (e.g. Intersil 1.3.x) seem
                                 * to have problems disabling the port, oh
                                 * well, too bad. */
                                printk(KERN_WARNING "%s: Error %d disabling MAC port\n",
                                       dev->name, err);
                                priv->broken_disableport = 1;
                        }
                }
                hermes_set_irqmask(hw, 0);
                hermes_write_regn(hw, EVACK, 0xffff);
        }
        
        /* firmware will have to reassociate */
        netif_carrier_off(dev);
        priv->last_linkstatus = 0xffff;

        return 0;
}

int orinoco_reinit_firmware(struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        struct hermes *hw = &priv->hw;
        int err;

        err = hermes_init(hw);
        if (err)
                return err;

        err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
        if (err == -EIO) {
                /* Try workaround for old Symbol firmware bug */
                printk(KERN_WARNING "%s: firmware ALLOC bug detected "
                       "(old Symbol firmware?). Trying to work around... ",
                       dev->name);
                
                priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
                err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
                if (err)
                        printk("failed!\n");
                else
                        printk("ok.\n");
        }

        return err;
}

static int __orinoco_hw_set_bitrate(struct orinoco_private *priv)
{
        hermes_t *hw = &priv->hw;
        int err = 0;

        if (priv->bitratemode >= BITRATE_TABLE_SIZE) {
                printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n",
                       priv->ndev->name, priv->bitratemode);
                return -EINVAL;
        }

        switch (priv->firmware_type) {
        case FIRMWARE_TYPE_AGERE:
                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFTXRATECONTROL,
                                           bitrate_table[priv->bitratemode].agere_txratectrl);
                break;
        case FIRMWARE_TYPE_INTERSIL:
        case FIRMWARE_TYPE_SYMBOL:
                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFTXRATECONTROL,
                                           bitrate_table[priv->bitratemode].intersil_txratectrl);
                break;
        default:
                BUG();
        }

        return err;
}

/* Change the WEP keys and/or the current keys.  Can be called
 * either from __orinoco_hw_setup_wep() or directly from
 * orinoco_ioctl_setiwencode().  In the later case the association
 * with the AP is not broken (if the firmware can handle it),
 * which is needed for 802.1x implementations. */
static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv)
{
        hermes_t *hw = &priv->hw;
        int err = 0;

        switch (priv->firmware_type) {
        case FIRMWARE_TYPE_AGERE:
                err = HERMES_WRITE_RECORD(hw, USER_BAP,
                                          HERMES_RID_CNFWEPKEYS_AGERE,
                                          &priv->keys);
                if (err)
                        return err;
                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFTXKEY_AGERE,
                                           priv->tx_key);
                if (err)
                        return err;
                break;
        case FIRMWARE_TYPE_INTERSIL:
        case FIRMWARE_TYPE_SYMBOL:
                {
                        int keylen;
                        int i;

                        /* Force uniform key length to work around firmware bugs */
                        keylen = le16_to_cpu(priv->keys[priv->tx_key].len);
                        
                        if (keylen > LARGE_KEY_SIZE) {
                                printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n",
                                       priv->ndev->name, priv->tx_key, keylen);
                                return -E2BIG;
                        }

                        /* Write all 4 keys */
                        for(i = 0; i < ORINOCO_MAX_KEYS; i++) {
                                err = hermes_write_ltv(hw, USER_BAP,
                                                       HERMES_RID_CNFDEFAULTKEY0 + i,
                                                       HERMES_BYTES_TO_RECLEN(keylen),
                                                       priv->keys[i].data);
                                if (err)
                                        return err;
                        }

                        /* Write the index of the key used in transmission */
                        err = hermes_write_wordrec(hw, USER_BAP,
                                                   HERMES_RID_CNFWEPDEFAULTKEYID,
                                                   priv->tx_key);
                        if (err)
                                return err;
                }
                break;
        }

        return 0;
}

static int __orinoco_hw_setup_wep(struct orinoco_private *priv)
{
        hermes_t *hw = &priv->hw;
        int err = 0;
        int master_wep_flag;
        int auth_flag;

        if (priv->wep_on)
                __orinoco_hw_setup_wepkeys(priv);

        if (priv->wep_restrict)
                auth_flag = HERMES_AUTH_SHARED_KEY;
        else
                auth_flag = HERMES_AUTH_OPEN;

        switch (priv->firmware_type) {
        case FIRMWARE_TYPE_AGERE: /* Agere style WEP */
                if (priv->wep_on) {
                        /* Enable the shared-key authentication. */
                        err = hermes_write_wordrec(hw, USER_BAP,
                                                   HERMES_RID_CNFAUTHENTICATION_AGERE,
                                                   auth_flag);
                }
                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFWEPENABLED_AGERE,
                                           priv->wep_on);
                if (err)
                        return err;
                break;

        case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */
        case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */
                if (priv->wep_on) {
                        if (priv->wep_restrict ||
                            (priv->firmware_type == FIRMWARE_TYPE_SYMBOL))
                                master_wep_flag = HERMES_WEP_PRIVACY_INVOKED |
                                                  HERMES_WEP_EXCL_UNENCRYPTED;
                        else
                                master_wep_flag = HERMES_WEP_PRIVACY_INVOKED;

                        err = hermes_write_wordrec(hw, USER_BAP,
                                                   HERMES_RID_CNFAUTHENTICATION,
                                                   auth_flag);
                        if (err)
                                return err;
                } else
                        master_wep_flag = 0;

                if (priv->iw_mode == IW_MODE_MONITOR)
                        master_wep_flag |= HERMES_WEP_HOST_DECRYPT;

                /* Master WEP setting : on/off */
                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFWEPFLAGS_INTERSIL,
                                           master_wep_flag);
                if (err)
                        return err;     

                break;
        }

        return 0;
}

static int __orinoco_program_rids(struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        hermes_t *hw = &priv->hw;
        int err;
        struct hermes_idstring idbuf;

        /* Set the MAC address */
        err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
                               HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
        if (err) {
                printk(KERN_ERR "%s: Error %d setting MAC address\n",
                       dev->name, err);
                return err;
        }

        /* Set up the link mode */
        err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE,
                                   priv->port_type);
        if (err) {
                printk(KERN_ERR "%s: Error %d setting port type\n",
                       dev->name, err);
                return err;
        }
        /* Set the channel/frequency */
        if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) {
                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFOWNCHANNEL,
                                           priv->channel);
                if (err) {
                        printk(KERN_ERR "%s: Error %d setting channel %d\n",
                               dev->name, err, priv->channel);
                        return err;
                }
        }

        if (priv->has_ibss) {
                u16 createibss;

                if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) {
                        printk(KERN_WARNING "%s: This firmware requires an "
                               "ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
                        /* With wvlan_cs, in this case, we would crash.
                         * hopefully, this driver will behave better...
                         * Jean II */
                        createibss = 0;
                } else {
                        createibss = priv->createibss;
                }
                
                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFCREATEIBSS,
                                           createibss);
                if (err) {
                        printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n",
                               dev->name, err);
                        return err;
                }
        }

        /* Set the desired ESSID */
        idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
        memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
        /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
        err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
                               HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
                               &idbuf);
        if (err) {
                printk(KERN_ERR "%s: Error %d setting OWNSSID\n",
                       dev->name, err);
                return err;
        }
        err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
                               HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
                               &idbuf);
        if (err) {
                printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n",
                       dev->name, err);
                return err;
        }

        /* Set the station name */
        idbuf.len = cpu_to_le16(strlen(priv->nick));
        memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
        err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
                               HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
                               &idbuf);
        if (err) {
                printk(KERN_ERR "%s: Error %d setting nickname\n",
                       dev->name, err);
                return err;
        }

        /* Set AP density */
        if (priv->has_sensitivity) {
                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFSYSTEMSCALE,
                                           priv->ap_density);
                if (err) {
                        printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE.  "
                               "Disabling sensitivity control\n",
                               dev->name, err);

                        priv->has_sensitivity = 0;
                }
        }

        /* Set RTS threshold */
        err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
                                   priv->rts_thresh);
        if (err) {
                printk(KERN_ERR "%s: Error %d setting RTS threshold\n",
                       dev->name, err);
                return err;
        }

        /* Set fragmentation threshold or MWO robustness */
        if (priv->has_mwo)
                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFMWOROBUST_AGERE,
                                           priv->mwo_robust);
        else
                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
                                           priv->frag_thresh);
        if (err) {
                printk(KERN_ERR "%s: Error %d setting fragmentation\n",
                       dev->name, err);
                return err;
        }

        /* Set bitrate */
        err = __orinoco_hw_set_bitrate(priv);
        if (err) {
                printk(KERN_ERR "%s: Error %d setting bitrate\n",
                       dev->name, err);
                return err;
        }

        /* Set power management */
        if (priv->has_pm) {
                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFPMENABLED,
                                           priv->pm_on);
                if (err) {
                        printk(KERN_ERR "%s: Error %d setting up PM\n",
                               dev->name, err);
                        return err;
                }

                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFMULTICASTRECEIVE,
                                           priv->pm_mcast);
                if (err) {
                        printk(KERN_ERR "%s: Error %d setting up PM\n",
                               dev->name, err);
                        return err;
                }
                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFMAXSLEEPDURATION,
                                           priv->pm_period);
                if (err) {
                        printk(KERN_ERR "%s: Error %d setting up PM\n",
                               dev->name, err);
                        return err;
                }
                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFPMHOLDOVERDURATION,
                                           priv->pm_timeout);
                if (err) {
                        printk(KERN_ERR "%s: Error %d setting up PM\n",
                               dev->name, err);
                        return err;
                }
        }

        /* Set preamble - only for Symbol so far... */
        if (priv->has_preamble) {
                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFPREAMBLE_SYMBOL,
                                           priv->preamble);
                if (err) {
                        printk(KERN_ERR "%s: Error %d setting preamble\n",
                               dev->name, err);
                        return err;
                }
        }

        /* Set up encryption */
        if (priv->has_wep) {
                err = __orinoco_hw_setup_wep(priv);
                if (err) {
                        printk(KERN_ERR "%s: Error %d activating WEP\n",
                               dev->name, err);
                        return err;
                }
        }

        /* Set promiscuity / multicast*/
        priv->promiscuous = 0;
        priv->mc_count = 0;
        __orinoco_set_multicast_list(dev); /* FIXME: what about the xmit_lock */

        return 0;
}

/* FIXME: return int? */
static void
__orinoco_set_multicast_list(struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        hermes_t *hw = &priv->hw;
        int err = 0;
        int promisc, mc_count;

        /* The Hermes doesn't seem to have an allmulti mode, so we go
         * into promiscuous mode and let the upper levels deal. */
        if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
             (dev->mc_count > MAX_MULTICAST(priv)) ) {
                promisc = 1;
                mc_count = 0;
        } else {
                promisc = 0;
                mc_count = dev->mc_count;
        }

        if (promisc != priv->promiscuous) {
                err = hermes_write_wordrec(hw, USER_BAP,
                                           HERMES_RID_CNFPROMISCUOUSMODE,
                                           promisc);
                if (err) {
                        printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n",
                               dev->name, err);
                } else 
                        priv->promiscuous = promisc;
        }

        if (! promisc && (mc_count || priv->mc_count) ) {
                struct dev_mc_list *p = dev->mc_list;
                struct hermes_multicast mclist;
                int i;

                for (i = 0; i < mc_count; i++) {
                        /* paranoia: is list shorter than mc_count? */
                        BUG_ON(! p);
                        /* paranoia: bad address size in list? */
                        BUG_ON(p->dmi_addrlen != ETH_ALEN);
                        
                        memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN);
                        p = p->next;
                }
                
                if (p)
                        printk(KERN_WARNING "%s: Multicast list is "
                               "longer than mc_count\n", dev->name);

                err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES,
                                       HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN),
                                       &mclist);
                if (err)
                        printk(KERN_ERR "%s: Error %d setting multicast list.\n",
                               dev->name, err);
                else
                        priv->mc_count = mc_count;
        }

        /* Since we can set the promiscuous flag when it wasn't asked
           for, make sure the net_device knows about it. */
        if (priv->promiscuous)
                dev->flags |= IFF_PROMISC;
        else
                dev->flags &= ~IFF_PROMISC;
}

static int orinoco_reconfigure(struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        struct hermes *hw = &priv->hw;
        unsigned long flags;
        int err = 0;

        if (priv->broken_disableport) {
                schedule_work(&priv->reset_work);
                return 0;
        }

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;
                
        err = hermes_disable_port(hw, 0);
        if (err) {
                printk(KERN_WARNING "%s: Unable to disable port while reconfiguring card\n",
                       dev->name);
                priv->broken_disableport = 1;
                goto out;
        }

        err = __orinoco_program_rids(dev);
        if (err) {
                printk(KERN_WARNING "%s: Unable to reconfigure card\n",
                       dev->name);
                goto out;
        }

        err = hermes_enable_port(hw, 0);
        if (err) {
                printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
                       dev->name);
                goto out;
        }

 out:
        if (err) {
                printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
                schedule_work(&priv->reset_work);
                err = 0;
        }

        orinoco_unlock(priv, &flags);
        return err;

}

/* This must be called from user context, without locks held - use
 * schedule_work() */
static void orinoco_reset(struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        struct hermes *hw = &priv->hw;
        int err = 0;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                /* When the hardware becomes available again, whatever
                 * detects that is responsible for re-initializing
                 * it. So no need for anything further */
                return;

        netif_stop_queue(dev);

        /* Shut off interrupts.  Depending on what state the hardware
         * is in, this might not work, but we'll try anyway */
        hermes_set_irqmask(hw, 0);
        hermes_write_regn(hw, EVACK, 0xffff);

        priv->hw_unavailable++;
        priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */
        netif_carrier_off(dev);

        orinoco_unlock(priv, &flags);

        if (priv->hard_reset)
                err = (*priv->hard_reset)(priv);
        if (err) {
                printk(KERN_ERR "%s: orinoco_reset: Error %d "
                       "performing  hard reset\n", dev->name, err);
                /* FIXME: shutdown of some sort */
                return;
        }

        err = orinoco_reinit_firmware(dev);
        if (err) {
                printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
                       dev->name, err);
                return;
        }

        spin_lock_irq(&priv->lock); /* This has to be called from user context */

        priv->hw_unavailable--;

        /* priv->open or priv->hw_unavailable might have changed while
         * we dropped the lock */
        if (priv->open && (! priv->hw_unavailable)) {
                err = __orinoco_up(dev);
                if (err) {
                        printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n",
                               dev->name, err);
                } else
                        dev->trans_start = jiffies;
        }

        spin_unlock_irq(&priv->lock);

        return;
}

/********************************************************************/
/* Interrupt handler                                                */
/********************************************************************/

static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw)
{
        printk(KERN_DEBUG "%s: TICK\n", dev->name);
}

static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw)
{
        /* This seems to happen a fair bit under load, but ignoring it
           seems to work fine...*/
        printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n",
               dev->name);
}

irqreturn_t orinoco_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
        struct net_device *dev = (struct net_device *)dev_id;
        struct orinoco_private *priv = netdev_priv(dev);
        hermes_t *hw = &priv->hw;
        int count = MAX_IRQLOOPS_PER_IRQ;
        u16 evstat, events;
        /* These are used to detect a runaway interrupt situation */
        /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy,
         * we panic and shut down the hardware */
        static int last_irq_jiffy = 0; /* jiffies value the last time
                                        * we were called */
        static int loops_this_jiffy = 0;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0) {
                /* If hw is unavailable - we don't know if the irq was
                 * for us or not */
                return IRQ_HANDLED;
        }

        evstat = hermes_read_regn(hw, EVSTAT);
        events = evstat & hw->inten;
        if (! events) {
                orinoco_unlock(priv, &flags);
                return IRQ_NONE;
        }
        
        if (jiffies != last_irq_jiffy)
                loops_this_jiffy = 0;
        last_irq_jiffy = jiffies;

        while (events && count--) {
                if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) {
                        printk(KERN_WARNING "%s: IRQ handler is looping too "
                               "much! Resetting.\n", dev->name);
                        /* Disable interrupts for now */
                        hermes_set_irqmask(hw, 0);
                        schedule_work(&priv->reset_work);
                        break;
                }

                /* Check the card hasn't been removed */
                if (! hermes_present(hw)) {
                        DEBUG(0, "orinoco_interrupt(): card removed\n");
                        break;
                }

                if (events & HERMES_EV_TICK)
                        __orinoco_ev_tick(dev, hw);
                if (events & HERMES_EV_WTERR)
                        __orinoco_ev_wterr(dev, hw);
                if (events & HERMES_EV_INFDROP)
                        __orinoco_ev_infdrop(dev, hw);
                if (events & HERMES_EV_INFO)
                        __orinoco_ev_info(dev, hw);
                if (events & HERMES_EV_RX)
                        __orinoco_ev_rx(dev, hw);
                if (events & HERMES_EV_TXEXC)
                        __orinoco_ev_txexc(dev, hw);
                if (events & HERMES_EV_TX)
                        __orinoco_ev_tx(dev, hw);
                if (events & HERMES_EV_ALLOC)
                        __orinoco_ev_alloc(dev, hw);
                
                hermes_write_regn(hw, EVACK, events);

                evstat = hermes_read_regn(hw, EVSTAT);
                events = evstat & hw->inten;
        };

        orinoco_unlock(priv, &flags);
        return IRQ_HANDLED;
}

/********************************************************************/
/* Initialization                                                   */
/********************************************************************/

struct comp_id {
        u16 id, variant, major, minor;
} __attribute__ ((packed));

static inline fwtype_t determine_firmware_type(struct comp_id *nic_id)
{
        if (nic_id->id < 0x8000)
                return FIRMWARE_TYPE_AGERE;
        else if (nic_id->id == 0x8000 && nic_id->major == 0)
                return FIRMWARE_TYPE_SYMBOL;
        else
                return FIRMWARE_TYPE_INTERSIL;
}

/* Set priv->firmware type, determine firmware properties */
static int determine_firmware(struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        hermes_t *hw = &priv->hw;
        int err;
        struct comp_id nic_id, sta_id;
        unsigned int firmver;
        char tmp[SYMBOL_MAX_VER_LEN+1];

        /* Get the hardware version */
        err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id);
        if (err) {
                printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n",
                       dev->name, err);
                return err;
        }

        le16_to_cpus(&nic_id.id);
        le16_to_cpus(&nic_id.variant);
        le16_to_cpus(&nic_id.major);
        le16_to_cpus(&nic_id.minor);
        printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n",
               dev->name, nic_id.id, nic_id.variant,
               nic_id.major, nic_id.minor);

        priv->firmware_type = determine_firmware_type(&nic_id);

        /* Get the firmware version */
        err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id);
        if (err) {
                printk(KERN_ERR "%s: Cannot read station identity: error %d\n",
                       dev->name, err);
                return err;
        }

        le16_to_cpus(&sta_id.id);
        le16_to_cpus(&sta_id.variant);
        le16_to_cpus(&sta_id.major);
        le16_to_cpus(&sta_id.minor);
        printk(KERN_DEBUG "%s: Station identity  %04x:%04x:%04x:%04x\n",
               dev->name, sta_id.id, sta_id.variant,
               sta_id.major, sta_id.minor);

        switch (sta_id.id) {
        case 0x15:
                printk(KERN_ERR "%s: Primary firmware is active\n",
                       dev->name);
                return -ENODEV;
        case 0x14b:
                printk(KERN_ERR "%s: Tertiary firmware is active\n",
                       dev->name);
                return -ENODEV;
        case 0x1f:      /* Intersil, Agere, Symbol Spectrum24 */
        case 0x21:      /* Symbol Spectrum24 Trilogy */
                break;
        default:
                printk(KERN_NOTICE "%s: Unknown station ID, please report\n",
                       dev->name);
                break;
        }

        /* Default capabilities */
        priv->has_sensitivity = 1;
        priv->has_mwo = 0;
        priv->has_preamble = 0;
        priv->has_port3 = 1;
        priv->has_ibss = 1;
        priv->has_wep = 0;
        priv->has_big_wep = 0;

        /* Determine capabilities from the firmware version */
        switch (priv->firmware_type) {
        case FIRMWARE_TYPE_AGERE:
                /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout,
                   ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */
                snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
                         "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor);

                firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor;

                priv->has_ibss = (firmver >= 0x60006);
                priv->has_wep = (firmver >= 0x40020);
                priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell
                                          Gold cards from the others? */
                priv->has_mwo = (firmver >= 0x60000);
                priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
                priv->ibss_port = 1;

                /* Tested with Agere firmware :
                 *      1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
                 * Tested CableTron firmware : 4.32 => Anton */
                break;
        case FIRMWARE_TYPE_SYMBOL:
                /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */
                /* Intel MAC : 00:02:B3:* */
                /* 3Com MAC : 00:50:DA:* */
                memset(tmp, 0, sizeof(tmp));
                /* Get the Symbol firmware version */
                err = hermes_read_ltv(hw, USER_BAP,
                                      HERMES_RID_SECONDARYVERSION_SYMBOL,
                                      SYMBOL_MAX_VER_LEN, NULL, &tmp);
                if (err) {
                        printk(KERN_WARNING
                               "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n",
                               dev->name, err);
                        firmver = 0;
                        tmp[0] = '\0';
                } else {
                        /* The firmware revision is a string, the format is
                         * something like : "V2.20-01".
                         * Quick and dirty parsing... - Jean II
                         */
                        firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12)
                                | ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4)
                                | (tmp[7] - '0');

                        tmp[SYMBOL_MAX_VER_LEN] = '\0';
                }

                snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
                         "Symbol %s", tmp);

                priv->has_ibss = (firmver >= 0x20000);
                priv->has_wep = (firmver >= 0x15012);
                priv->has_big_wep = (firmver >= 0x20000);
                priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) || 
                               (firmver >= 0x29000 && firmver < 0x30000) ||
                               firmver >= 0x31000;
                priv->has_preamble = (firmver >= 0x20000);
                priv->ibss_port = 4;
                /* Tested with Intel firmware : 0x20015 => Jean II */
                /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */
                break;
        case FIRMWARE_TYPE_INTERSIL:
                /* D-Link, Linksys, Adtron, ZoomAir, and many others...
                 * Samsung, Compaq 100/200 and Proxim are slightly
                 * different and less well tested */
                /* D-Link MAC : 00:40:05:* */
                /* Addtron MAC : 00:90:D1:* */
                snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
                         "Intersil %d.%d.%d", sta_id.major, sta_id.minor,
                         sta_id.variant);

                firmver = ((unsigned long)sta_id.major << 16) |
                        ((unsigned long)sta_id.minor << 8) | sta_id.variant;

                priv->has_ibss = (firmver >= 0x000700); /* FIXME */
                priv->has_big_wep = priv->has_wep = (firmver >= 0x000800);
                priv->has_pm = (firmver >= 0x000700);

                if (firmver >= 0x000800)
                        priv->ibss_port = 0;
                else {
                        printk(KERN_NOTICE "%s: Intersil firmware earlier "
                               "than v0.8.x - several features not supported\n",
                               dev->name);
                        priv->ibss_port = 1;
                }
                break;
        }
        printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name,
               priv->fw_name);

        return 0;
}

static int orinoco_init(struct net_device *dev)
{
        struct orinoco_private *priv = netdev_priv(dev);
        hermes_t *hw = &priv->hw;
        int err = 0;
        struct hermes_idstring nickbuf;
        u16 reclen;
        int len;

        TRACE_ENTER(dev->name);

        /* No need to lock, the hw_unavailable flag is already set in
         * alloc_orinocodev() */
        priv->nicbuf_size = IEEE802_11_FRAME_LEN + ETH_HLEN;

        /* Initialize the firmware */
        err = hermes_init(hw);
        if (err != 0) {
                printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n",
                       dev->name, err);
                goto out;
        }

        err = determine_firmware(dev);
        if (err != 0) {
                printk(KERN_ERR "%s: Incompatible firmware, aborting\n",
                       dev->name);
                goto out;
        }

        if (priv->has_port3)
                printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name);
        if (priv->has_ibss)
                printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n",
                       dev->name);
        if (priv->has_wep) {
                printk(KERN_DEBUG "%s: WEP supported, ", dev->name);
                if (priv->has_big_wep)
                        printk("104-bit key\n");
                else
                        printk("40-bit key\n");
        }

        /* Get the MAC address */
        err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
                              ETH_ALEN, NULL, dev->dev_addr);
        if (err) {
                printk(KERN_WARNING "%s: failed to read MAC address!\n",
                       dev->name);
                goto out;
        }

        printk(KERN_DEBUG "%s: MAC address %02X:%02X:%02X:%02X:%02X:%02X\n",
               dev->name, dev->dev_addr[0], dev->dev_addr[1],
               dev->dev_addr[2], dev->dev_addr[3], dev->dev_addr[4],
               dev->dev_addr[5]);

        /* Get the station name */
        err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
                              sizeof(nickbuf), &reclen, &nickbuf);
        if (err) {
                printk(KERN_ERR "%s: failed to read station name\n",
                       dev->name);
                goto out;
        }
        if (nickbuf.len)
                len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len));
        else
                len = min(IW_ESSID_MAX_SIZE, 2 * reclen);
        memcpy(priv->nick, &nickbuf.val, len);
        priv->nick[len] = '\0';

        printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick);

        /* Get allowed channels */
        err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST,
                                  &priv->channel_mask);
        if (err) {
                printk(KERN_ERR "%s: failed to read channel list!\n",
                       dev->name);
                goto out;
        }

        /* Get initial AP density */
        err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE,
                                  &priv->ap_density);
        if (err || priv->ap_density < 1 || priv->ap_density > 3) {
                priv->has_sensitivity = 0;
        }

        /* Get initial RTS threshold */
        err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
                                  &priv->rts_thresh);
        if (err) {
                printk(KERN_ERR "%s: failed to read RTS threshold!\n",
                       dev->name);
                goto out;
        }

        /* Get initial fragmentation settings */
        if (priv->has_mwo)
                err = hermes_read_wordrec(hw, USER_BAP,
                                          HERMES_RID_CNFMWOROBUST_AGERE,
                                          &priv->mwo_robust);
        else
                err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
                                          &priv->frag_thresh);
        if (err) {
                printk(KERN_ERR "%s: failed to read fragmentation settings!\n",
                       dev->name);
                goto out;
        }

        /* Power management setup */
        if (priv->has_pm) {
                priv->pm_on = 0;
                priv->pm_mcast = 1;
                err = hermes_read_wordrec(hw, USER_BAP,
                                          HERMES_RID_CNFMAXSLEEPDURATION,
                                          &priv->pm_period);
                if (err) {
                        printk(KERN_ERR "%s: failed to read power management period!\n",
                               dev->name);
                        goto out;
                }
                err = hermes_read_wordrec(hw, USER_BAP,
                                          HERMES_RID_CNFPMHOLDOVERDURATION,
                                          &priv->pm_timeout);
                if (err) {
                        printk(KERN_ERR "%s: failed to read power management timeout!\n",
                               dev->name);
                        goto out;
                }
        }

        /* Preamble setup */
        if (priv->has_preamble) {
                err = hermes_read_wordrec(hw, USER_BAP,
                                          HERMES_RID_CNFPREAMBLE_SYMBOL,
                                          &priv->preamble);
                if (err)
                        goto out;
        }
                
        /* Set up the default configuration */
        priv->iw_mode = IW_MODE_INFRA;
        /* By default use IEEE/IBSS ad-hoc mode if we have it */
        priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss);
        set_port_type(priv);
        priv->channel = 0; /* use firmware default */

        priv->promiscuous = 0;
        priv->wep_on = 0;
        priv->tx_key = 0;

        err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
        if (err == -EIO) {
                /* Try workaround for old Symbol firmware bug */
                printk(KERN_WARNING "%s: firmware ALLOC bug detected "
                       "(old Symbol firmware?). Trying to work around... ",
                       dev->name);
                
                priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
                err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
                if (err)
                        printk("failed!\n");
                else
                        printk("ok.\n");
        }
        if (err) {
                printk("%s: Error %d allocating Tx buffer\n", dev->name, err);
                goto out;
        }

        /* Make the hardware available, as long as it hasn't been
         * removed elsewhere (e.g. by PCMCIA hot unplug) */
        spin_lock_irq(&priv->lock);
        priv->hw_unavailable--;
        spin_unlock_irq(&priv->lock);

        printk(KERN_DEBUG "%s: ready\n", dev->name);

 out:
        TRACE_EXIT(dev->name);
        return err;
}

struct net_device *alloc_orinocodev(int sizeof_card,
                                    int (*hard_reset)(struct orinoco_private *))
{
        struct net_device *dev;
        struct orinoco_private *priv;

        dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card);
        if (! dev)
                return NULL;
        priv = netdev_priv(dev);
        priv->ndev = dev;
        if (sizeof_card)
                priv->card = (void *)((unsigned long)netdev_priv(dev)
                                      + sizeof(struct orinoco_private));
        else
                priv->card = NULL;

        /* Setup / override net_device fields */
        dev->init = orinoco_init;
        dev->hard_start_xmit = orinoco_xmit;
        dev->tx_timeout = orinoco_tx_timeout;
        dev->watchdog_timeo = HZ; /* 1 second timeout */
        dev->get_stats = orinoco_get_stats;
        dev->get_wireless_stats = orinoco_get_wireless_stats;
        dev->do_ioctl = orinoco_ioctl;
        dev->change_mtu = orinoco_change_mtu;
        dev->set_multicast_list = orinoco_set_multicast_list;
        /* we use the default eth_mac_addr for setting the MAC addr */

        /* Set up default callbacks */
        dev->open = orinoco_open;
        dev->stop = orinoco_stop;
        priv->hard_reset = hard_reset;

        spin_lock_init(&priv->lock);
        priv->open = 0;
        priv->hw_unavailable = 1; /* orinoco_init() must clear this
                                   * before anything else touches the
                                   * hardware */
        INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev);

        netif_carrier_off(dev);
        priv->last_linkstatus = 0xffff;

        return dev;

}

void free_orinocodev(struct net_device *dev)
{
        free_netdev(dev);
}

/********************************************************************/
/* Wireless extensions                                              */
/********************************************************************/

static int orinoco_hw_get_bssid(struct orinoco_private *priv,
                                char buf[ETH_ALEN])
{
        hermes_t *hw = &priv->hw;
        int err = 0;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
                              ETH_ALEN, NULL, buf);

        orinoco_unlock(priv, &flags);

        return err;
}

static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
                                char buf[IW_ESSID_MAX_SIZE+1])
{
        hermes_t *hw = &priv->hw;
        int err = 0;
        struct hermes_idstring essidbuf;
        char *p = (char *)(&essidbuf.val);
        int len;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        if (strlen(priv->desired_essid) > 0) {
                /* We read the desired SSID from the hardware rather
                   than from priv->desired_essid, just in case the
                   firmware is allowed to change it on us. I'm not
                   sure about this */
                /* My guess is that the OWNSSID should always be whatever
                 * we set to the card, whereas CURRENT_SSID is the one that
                 * may change... - Jean II */
                u16 rid;

                *active = 1;

                rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID :
                        HERMES_RID_CNFDESIREDSSID;
                
                err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
                                      NULL, &essidbuf);
                if (err)
                        goto fail_unlock;
        } else {
                *active = 0;

                err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
                                      sizeof(essidbuf), NULL, &essidbuf);
                if (err)
                        goto fail_unlock;
        }

        len = le16_to_cpu(essidbuf.len);

        memset(buf, 0, IW_ESSID_MAX_SIZE+1);
        memcpy(buf, p, len);
        buf[len] = '\0';

 fail_unlock:
        orinoco_unlock(priv, &flags);

        return err;       
}

static long orinoco_hw_get_freq(struct orinoco_private *priv)
{
        
        hermes_t *hw = &priv->hw;
        int err = 0;
        u16 channel;
        long freq = 0;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;
        
        err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel);
        if (err)
                goto out;

        /* Intersil firmware 1.3.5 returns 0 when the interface is down */
        if (channel == 0) {
                err = -EBUSY;
                goto out;
        }

        if ( (channel < 1) || (channel > NUM_CHANNELS) ) {
                printk(KERN_WARNING "%s: Channel out of range (%d)!\n",
                       priv->ndev->name, channel);
                err = -EBUSY;
                goto out;

        }
        freq = channel_frequency[channel-1] * 100000;

 out:
        orinoco_unlock(priv, &flags);

        if (err > 0)
                err = -EBUSY;
        return err ? err : freq;
}

static int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
                                      int *numrates, s32 *rates, int max)
{
        hermes_t *hw = &priv->hw;
        struct hermes_idstring list;
        unsigned char *p = (unsigned char *)&list.val;
        int err = 0;
        int num;
        int i;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
                              sizeof(list), NULL, &list);
        orinoco_unlock(priv, &flags);

        if (err)
                return err;
        
        num = le16_to_cpu(list.len);
        *numrates = num;
        num = min(num, max);

        for (i = 0; i < num; i++) {
                rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */
        }

        return 0;
}

static int orinoco_ioctl_getiwrange(struct net_device *dev, struct iw_point *rrq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        int err = 0;
        int mode;
        struct iw_range range;
        int numrates;
        int i, k;
        unsigned long flags;

        TRACE_ENTER(dev->name);

        if (!access_ok(VERIFY_WRITE, rrq->pointer, sizeof(range)))
                return -EFAULT;

        rrq->length = sizeof(range);

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        mode = priv->iw_mode;
        orinoco_unlock(priv, &flags);

        memset(&range, 0, sizeof(range));

        /* Much of this shamelessly taken from wvlan_cs.c. No idea
         * what it all means -dgibson */
        range.we_version_compiled = WIRELESS_EXT;
        range.we_version_source = 11;

        range.min_nwid = range.max_nwid = 0; /* We don't use nwids */

        /* Set available channels/frequencies */
        range.num_channels = NUM_CHANNELS;
        k = 0;
        for (i = 0; i < NUM_CHANNELS; i++) {
                if (priv->channel_mask & (1 << i)) {
                        range.freq[k].i = i + 1;
                        range.freq[k].m = channel_frequency[i] * 100000;
                        range.freq[k].e = 1;
                        k++;
                }
                
                if (k >= IW_MAX_FREQUENCIES)
                        break;
        }
        range.num_frequency = k;

        range.sensitivity = 3;

        if ((mode == IW_MODE_ADHOC) && (priv->spy_number == 0)){
                /* Quality stats meaningless in ad-hoc mode */
                range.max_qual.qual = 0;
                range.max_qual.level = 0;
                range.max_qual.noise = 0;
                range.avg_qual.qual = 0;
                range.avg_qual.level = 0;
                range.avg_qual.noise = 0;
        } else {
                range.max_qual.qual = 0x8b - 0x2f;
                range.max_qual.level = 0x2f - 0x95 - 1;
                range.max_qual.noise = 0x2f - 0x95 - 1;
                /* Need to get better values */
                range.avg_qual.qual = 0x24;
                range.avg_qual.level = 0xC2;
                range.avg_qual.noise = 0x9E;
        }

        err = orinoco_hw_get_bitratelist(priv, &numrates,
                                         range.bitrate, IW_MAX_BITRATES);
        if (err)
                return err;
        range.num_bitrates = numrates;
        
        /* Set an indication of the max TCP throughput in bit/s that we can
         * expect using this interface. May be use for QoS stuff...
         * Jean II */
        if(numrates > 2)
                range.throughput = 5 * 1000 * 1000;     /* ~5 Mb/s */
        else
                range.throughput = 1.5 * 1000 * 1000;   /* ~1.5 Mb/s */

        range.min_rts = 0;
        range.max_rts = 2347;
        range.min_frag = 256;
        range.max_frag = 2346;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;
        if (priv->has_wep) {
                range.max_encoding_tokens = ORINOCO_MAX_KEYS;

                range.encoding_size[0] = SMALL_KEY_SIZE;
                range.num_encoding_sizes = 1;

                if (priv->has_big_wep) {
                        range.encoding_size[1] = LARGE_KEY_SIZE;
                        range.num_encoding_sizes = 2;
                }
        } else {
                range.num_encoding_sizes = 0;
                range.max_encoding_tokens = 0;
        }
        orinoco_unlock(priv, &flags);
                
        range.min_pmp = 0;
        range.max_pmp = 65535000;
        range.min_pmt = 0;
        range.max_pmt = 65535 * 1000;   /* ??? */
        range.pmp_flags = IW_POWER_PERIOD;
        range.pmt_flags = IW_POWER_TIMEOUT;
        range.pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R;

        range.num_txpower = 1;
        range.txpower[0] = 15; /* 15dBm */
        range.txpower_capa = IW_TXPOW_DBM;

        range.retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
        range.retry_flags = IW_RETRY_LIMIT;
        range.r_time_flags = IW_RETRY_LIFETIME;
        range.min_retry = 0;
        range.max_retry = 65535;        /* ??? */
        range.min_r_time = 0;
        range.max_r_time = 65535 * 1000;        /* ??? */

        if (copy_to_user(rrq->pointer, &range, sizeof(range)))
                return -EFAULT;

        TRACE_EXIT(dev->name);

        return 0;
}

static int orinoco_ioctl_setiwencode(struct net_device *dev, struct iw_point *erq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        int index = (erq->flags & IW_ENCODE_INDEX) - 1;
        int setindex = priv->tx_key;
        int enable = priv->wep_on;
        int restricted = priv->wep_restrict;
        u16 xlen = 0;
        int err = 0;
        char keybuf[ORINOCO_MAX_KEY_SIZE];
        unsigned long flags;

        if (! priv->has_wep)
                return -EOPNOTSUPP;

        if (erq->pointer) {
                /* We actually have a key to set - check its length */
                if (erq->length > LARGE_KEY_SIZE)
                        return -E2BIG;

                if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep )
                        return -E2BIG;
                
                if (copy_from_user(keybuf, erq->pointer, erq->length))
                        return -EFAULT;
        }

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        if (erq->pointer) {
                if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
                        index = priv->tx_key;

                /* Adjust key length to a supported value */
                if (erq->length > SMALL_KEY_SIZE) {
                        xlen = LARGE_KEY_SIZE;
                } else if (erq->length > 0) {
                        xlen = SMALL_KEY_SIZE;
                } else
                        xlen = 0;

                /* Switch on WEP if off */
                if ((!enable) && (xlen > 0)) {
                        setindex = index;
                        enable = 1;
                }
        } else {
                /* Important note : if the user do "iwconfig eth0 enc off",
                 * we will arrive there with an index of -1. This is valid
                 * but need to be taken care off... Jean II */
                if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) {
                        if((index != -1) || (erq->flags == 0)) {
                                err = -EINVAL;
                                goto out;
                        }
                } else {
                        /* Set the index : Check that the key is valid */
                        if(priv->keys[index].len == 0) {
                                err = -EINVAL;
                                goto out;
                        }
                        setindex = index;
                }
        }

        if (erq->flags & IW_ENCODE_DISABLED)
                enable = 0;
        if (erq->flags & IW_ENCODE_OPEN)
                restricted = 0;
        if (erq->flags & IW_ENCODE_RESTRICTED)
                restricted = 1;

        if (erq->pointer) {
                priv->keys[index].len = cpu_to_le16(xlen);
                memset(priv->keys[index].data, 0,
                       sizeof(priv->keys[index].data));
                memcpy(priv->keys[index].data, keybuf, erq->length);
        }
        priv->tx_key = setindex;

        /* Try fast key change if connected and only keys are changed */
        if (priv->wep_on && enable && (priv->wep_restrict == restricted) &&
            netif_carrier_ok(dev)) {
                err = __orinoco_hw_setup_wepkeys(priv);
                /* No need to commit if successful */
                goto out;
        }

        priv->wep_on = enable;
        priv->wep_restrict = restricted;

 out:
        orinoco_unlock(priv, &flags);

        return err;
}

static int orinoco_ioctl_getiwencode(struct net_device *dev, struct iw_point *erq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        int index = (erq->flags & IW_ENCODE_INDEX) - 1;
        u16 xlen = 0;
        char keybuf[ORINOCO_MAX_KEY_SIZE];
        unsigned long flags;

        if (! priv->has_wep)
                return -EOPNOTSUPP;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
                index = priv->tx_key;

        erq->flags = 0;
        if (! priv->wep_on)
                erq->flags |= IW_ENCODE_DISABLED;
        erq->flags |= index + 1;

        if (priv->wep_restrict)
                erq->flags |= IW_ENCODE_RESTRICTED;
        else
                erq->flags |= IW_ENCODE_OPEN;

        xlen = le16_to_cpu(priv->keys[index].len);

        erq->length = xlen;

        memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE);

        orinoco_unlock(priv, &flags);

        if (erq->pointer) {
                if (copy_to_user(erq->pointer, keybuf, xlen))
                        return -EFAULT;
        }

        return 0;
}

static int orinoco_ioctl_setessid(struct net_device *dev, struct iw_point *erq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        char essidbuf[IW_ESSID_MAX_SIZE+1];
        unsigned long flags;

        /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it
         * anyway... - Jean II */

        memset(&essidbuf, 0, sizeof(essidbuf));

        if (erq->flags) {
                if (erq->length > IW_ESSID_MAX_SIZE)
                        return -E2BIG;
                
                if (copy_from_user(&essidbuf, erq->pointer, erq->length))
                        return -EFAULT;

                essidbuf[erq->length] = '\0';
        }

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        memcpy(priv->desired_essid, essidbuf, sizeof(priv->desired_essid));

        orinoco_unlock(priv, &flags);

        return 0;
}

static int orinoco_ioctl_getessid(struct net_device *dev, struct iw_point *erq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        char essidbuf[IW_ESSID_MAX_SIZE+1];
        int active;
        int err = 0;
        unsigned long flags;

        TRACE_ENTER(dev->name);

        if (netif_running(dev)) {
                err = orinoco_hw_get_essid(priv, &active, essidbuf);
                if (err)
                        return err;
        } else {
                if (orinoco_lock(priv, &flags) != 0)
                        return -EBUSY;
                memcpy(essidbuf, priv->desired_essid, sizeof(essidbuf));
                orinoco_unlock(priv, &flags);
        }

        erq->flags = 1;
        erq->length = strlen(essidbuf) + 1;
        if (erq->pointer)
                if (copy_to_user(erq->pointer, essidbuf, erq->length))
                        return -EFAULT;

        TRACE_EXIT(dev->name);
        
        return 0;
}

static int orinoco_ioctl_setnick(struct net_device *dev, struct iw_point *nrq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        char nickbuf[IW_ESSID_MAX_SIZE+1];
        unsigned long flags;

        if (nrq->length > IW_ESSID_MAX_SIZE)
                return -E2BIG;

        memset(nickbuf, 0, sizeof(nickbuf));

        if (copy_from_user(nickbuf, nrq->pointer, nrq->length))
                return -EFAULT;

        nickbuf[nrq->length] = '\0';
        
        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        memcpy(priv->nick, nickbuf, sizeof(priv->nick));

        orinoco_unlock(priv, &flags);

        return 0;
}

static int orinoco_ioctl_getnick(struct net_device *dev, struct iw_point *nrq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        char nickbuf[IW_ESSID_MAX_SIZE+1];
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE+1);
        orinoco_unlock(priv, &flags);

        nrq->length = strlen(nickbuf)+1;

        if (copy_to_user(nrq->pointer, nickbuf, sizeof(nickbuf)))
                return -EFAULT;

        return 0;
}

static int orinoco_ioctl_setfreq(struct net_device *dev, struct iw_freq *frq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        int chan = -1;
        unsigned long flags;

        /* We can only use this in Ad-Hoc demo mode to set the operating
         * frequency, or in IBSS mode to set the frequency where the IBSS
         * will be created - Jean II */
        if (priv->iw_mode != IW_MODE_ADHOC)
                return -EOPNOTSUPP;

        if ( (frq->e == 0) && (frq->m <= 1000) ) {
                /* Setting by channel number */
                chan = frq->m;
        } else {
                /* Setting by frequency - search the table */
                int mult = 1;
                int i;

                for (i = 0; i < (6 - frq->e); i++)
                        mult *= 10;

                for (i = 0; i < NUM_CHANNELS; i++)
                        if (frq->m == (channel_frequency[i] * mult))
                                chan = i+1;
        }

        if ( (chan < 1) || (chan > NUM_CHANNELS) ||
             ! (priv->channel_mask & (1 << (chan-1)) ) )
                return -EINVAL;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;
        priv->channel = chan;
        orinoco_unlock(priv, &flags);

        return 0;
}

static int orinoco_ioctl_getsens(struct net_device *dev, struct iw_param *srq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        hermes_t *hw = &priv->hw;
        u16 val;
        int err;
        unsigned long flags;

        if (!priv->has_sensitivity)
                return -EOPNOTSUPP;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;
        err = hermes_read_wordrec(hw, USER_BAP,
                                  HERMES_RID_CNFSYSTEMSCALE, &val);
        orinoco_unlock(priv, &flags);

        if (err)
                return err;

        srq->value = val;
        srq->fixed = 0; /* auto */

        return 0;
}

static int orinoco_ioctl_setsens(struct net_device *dev, struct iw_param *srq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        int val = srq->value;
        unsigned long flags;

        if (!priv->has_sensitivity)
                return -EOPNOTSUPP;

        if ((val < 1) || (val > 3))
                return -EINVAL;
        
        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;
        priv->ap_density = val;
        orinoco_unlock(priv, &flags);

        return 0;
}

static int orinoco_ioctl_setrts(struct net_device *dev, struct iw_param *rrq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        int val = rrq->value;
        unsigned long flags;

        if (rrq->disabled)
                val = 2347;

        if ( (val < 0) || (val > 2347) )
                return -EINVAL;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        priv->rts_thresh = val;
        orinoco_unlock(priv, &flags);

        return 0;
}

static int orinoco_ioctl_setfrag(struct net_device *dev, struct iw_param *frq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        int err = 0;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        if (priv->has_mwo) {
                if (frq->disabled)
                        priv->mwo_robust = 0;
                else {
                        if (frq->fixed)
                                printk(KERN_WARNING "%s: Fixed fragmentation is "
                                       "not supported on this firmware. "
                                       "Using MWO robust instead.\n", dev->name);
                        priv->mwo_robust = 1;
                }
        } else {
                if (frq->disabled)
                        priv->frag_thresh = 2346;
                else {
                        if ( (frq->value < 256) || (frq->value > 2346) )
                                err = -EINVAL;
                        else
                                priv->frag_thresh = frq->value & ~0x1; /* must be even */
                }
        }

        orinoco_unlock(priv, &flags);

        return err;
}

static int orinoco_ioctl_getfrag(struct net_device *dev, struct iw_param *frq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        hermes_t *hw = &priv->hw;
        int err = 0;
        u16 val;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;
        
        if (priv->has_mwo) {
                err = hermes_read_wordrec(hw, USER_BAP,
                                          HERMES_RID_CNFMWOROBUST_AGERE,
                                          &val);
                if (err)
                        val = 0;

                frq->value = val ? 2347 : 0;
                frq->disabled = ! val;
                frq->fixed = 0;
        } else {
                err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
                                          &val);
                if (err)
                        val = 0;

                frq->value = val;
                frq->disabled = (val >= 2346);
                frq->fixed = 1;
        }

        orinoco_unlock(priv, &flags);
        
        return err;
}

static int orinoco_ioctl_setrate(struct net_device *dev, struct iw_param *rrq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        int err = 0;
        int ratemode = -1;
        int bitrate; /* 100s of kilobits */
        int i;
        unsigned long flags;
        
        /* As the user space doesn't know our highest rate, it uses -1
         * to ask us to set the highest rate.  Test it using "iwconfig
         * ethX rate auto" - Jean II */
        if (rrq->value == -1)
                bitrate = 110;
        else {
                if (rrq->value % 100000)
                        return -EINVAL;
                bitrate = rrq->value / 100000;
        }

        if ( (bitrate != 10) && (bitrate != 20) &&
             (bitrate != 55) && (bitrate != 110) )
                return -EINVAL;

        for (i = 0; i < BITRATE_TABLE_SIZE; i++)
                if ( (bitrate_table[i].bitrate == bitrate) &&
                     (bitrate_table[i].automatic == ! rrq->fixed) ) {
                        ratemode = i;
                        break;
                }
        
        if (ratemode == -1)
                return -EINVAL;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;
        priv->bitratemode = ratemode;
        orinoco_unlock(priv, &flags);

        return err;
}

static int orinoco_ioctl_getrate(struct net_device *dev, struct iw_param *rrq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        hermes_t *hw = &priv->hw;
        int err = 0;
        int ratemode;
        int i;
        u16 val;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        ratemode = priv->bitratemode;

        BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE));

        rrq->value = bitrate_table[ratemode].bitrate * 100000;
        rrq->fixed = ! bitrate_table[ratemode].automatic;
        rrq->disabled = 0;

        /* If the interface is running we try to find more about the
           current mode */
        if (netif_running(dev)) {
                err = hermes_read_wordrec(hw, USER_BAP,
                                          HERMES_RID_CURRENTTXRATE, &val);
                if (err)
                        goto out;
                
                switch (priv->firmware_type) {
                case FIRMWARE_TYPE_AGERE: /* Lucent style rate */
                        /* Note : in Lucent firmware, the return value of
                         * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s,
                         * and therefore is totally different from the
                         * encoding of HERMES_RID_CNFTXRATECONTROL.
                         * Don't forget that 6Mb/s is really 5.5Mb/s */
                        if (val == 6)
                                rrq->value = 5500000;
                        else
                                rrq->value = val * 1000000;
                        break;
                case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */
                case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */
                        for (i = 0; i < BITRATE_TABLE_SIZE; i++)
                                if (bitrate_table[i].intersil_txratectrl == val) {
                                        ratemode = i;
                                        break;
                                }
                        if (i >= BITRATE_TABLE_SIZE)
                                printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n",
                                       dev->name, val);

                        rrq->value = bitrate_table[ratemode].bitrate * 100000;
                        break;
                default:
                        BUG();
                }
        }

 out:
        orinoco_unlock(priv, &flags);

        return err;
}

static int orinoco_ioctl_setpower(struct net_device *dev, struct iw_param *prq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        int err = 0;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        if (prq->disabled) {
                priv->pm_on = 0;
        } else {
                switch (prq->flags & IW_POWER_MODE) {
                case IW_POWER_UNICAST_R:
                        priv->pm_mcast = 0;
                        priv->pm_on = 1;
                        break;
                case IW_POWER_ALL_R:
                        priv->pm_mcast = 1;
                        priv->pm_on = 1;
                        break;
                case IW_POWER_ON:
                        /* No flags : but we may have a value - Jean II */
                        break;
                default:
                        err = -EINVAL;
                }
                if (err)
                        goto out;
                
                if (prq->flags & IW_POWER_TIMEOUT) {
                        priv->pm_on = 1;
                        priv->pm_timeout = prq->value / 1000;
                }
                if (prq->flags & IW_POWER_PERIOD) {
                        priv->pm_on = 1;
                        priv->pm_period = prq->value / 1000;
                }
                /* It's valid to not have a value if we are just toggling
                 * the flags... Jean II */
                if(!priv->pm_on) {
                        err = -EINVAL;
                        goto out;
                }                       
        }

 out:
        orinoco_unlock(priv, &flags);

        return err;
}

static int orinoco_ioctl_getpower(struct net_device *dev, struct iw_param *prq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        hermes_t *hw = &priv->hw;
        int err = 0;
        u16 enable, period, timeout, mcast;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;
        
        err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable);
        if (err)
                goto out;

        err = hermes_read_wordrec(hw, USER_BAP,
                                  HERMES_RID_CNFMAXSLEEPDURATION, &period);
        if (err)
                goto out;

        err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout);
        if (err)
                goto out;

        err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast);
        if (err)
                goto out;

        prq->disabled = !enable;
        /* Note : by default, display the period */
        if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
                prq->flags = IW_POWER_TIMEOUT;
                prq->value = timeout * 1000;
        } else {
                prq->flags = IW_POWER_PERIOD;
                prq->value = period * 1000;
        }
        if (mcast)
                prq->flags |= IW_POWER_ALL_R;
        else
                prq->flags |= IW_POWER_UNICAST_R;

 out:
        orinoco_unlock(priv, &flags);

        return err;
}

static int orinoco_ioctl_getretry(struct net_device *dev, struct iw_param *rrq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        hermes_t *hw = &priv->hw;
        int err = 0;
        u16 short_limit, long_limit, lifetime;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;
        
        err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT,
                                  &short_limit);
        if (err)
                goto out;

        err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT,
                                  &long_limit);
        if (err)
                goto out;

        err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME,
                                  &lifetime);
        if (err)
                goto out;

        rrq->disabled = 0;              /* Can't be disabled */

        /* Note : by default, display the retry number */
        if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
                rrq->flags = IW_RETRY_LIFETIME;
                rrq->value = lifetime * 1000;   /* ??? */
        } else {
                /* By default, display the min number */
                if ((rrq->flags & IW_RETRY_MAX)) {
                        rrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
                        rrq->value = long_limit;
                } else {
                        rrq->flags = IW_RETRY_LIMIT;
                        rrq->value = short_limit;
                        if(short_limit != long_limit)
                                rrq->flags |= IW_RETRY_MIN;
                }
        }

 out:
        orinoco_unlock(priv, &flags);

        return err;
}

static int orinoco_ioctl_setibssport(struct net_device *dev, struct iwreq *wrq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        int val = *( (int *) wrq->u.name );
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        priv->ibss_port = val ;

        /* Actually update the mode we are using */
        set_port_type(priv);

        orinoco_unlock(priv, &flags);
        return 0;
}

static int orinoco_ioctl_getibssport(struct net_device *dev, struct iwreq *wrq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        int *val = (int *)wrq->u.name;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        *val = priv->ibss_port;
        orinoco_unlock(priv, &flags);

        return 0;
}

static int orinoco_ioctl_setport3(struct net_device *dev, struct iwreq *wrq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        int val = *( (int *) wrq->u.name );
        int err = 0;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        switch (val) {
        case 0: /* Try to do IEEE ad-hoc mode */
                if (! priv->has_ibss) {
                        err = -EINVAL;
                        break;
                }
                priv->prefer_port3 = 0;
                        
                break;

        case 1: /* Try to do Lucent proprietary ad-hoc mode */
                if (! priv->has_port3) {
                        err = -EINVAL;
                        break;
                }
                priv->prefer_port3 = 1;
                break;

        default:
                err = -EINVAL;
        }

        if (! err)
                /* Actually update the mode we are using */
                set_port_type(priv);

        orinoco_unlock(priv, &flags);

        return err;
}

static int orinoco_ioctl_getport3(struct net_device *dev, struct iwreq *wrq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        int *val = (int *)wrq->u.name;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        *val = priv->prefer_port3;
        orinoco_unlock(priv, &flags);
        return 0;
}

/* Spy is used for link quality/strength measurements in Ad-Hoc mode
 * Jean II */
static int orinoco_ioctl_setspy(struct net_device *dev, struct iw_point *srq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        struct sockaddr address[IW_MAX_SPY];
        int number = srq->length;
        int i;
        int err = 0;
        unsigned long flags;

        /* Check the number of addresses */
        if (number > IW_MAX_SPY)
                return -E2BIG;

        /* Get the data in the driver */
        if (srq->pointer) {
                if (copy_from_user(address, srq->pointer,
                                   sizeof(struct sockaddr) * number))
                        return -EFAULT;
        }

        /* Make sure nobody mess with the structure while we do */
        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        /* orinoco_lock() doesn't disable interrupts, so make sure the
         * interrupt rx path don't get confused while we copy */
        priv->spy_number = 0;

        if (number > 0) {
                /* Extract the addresses */
                for (i = 0; i < number; i++)
                        memcpy(priv->spy_address[i], address[i].sa_data,
                               ETH_ALEN);
                /* Reset stats */
                memset(priv->spy_stat, 0,
                       sizeof(struct iw_quality) * IW_MAX_SPY);
                /* Set number of addresses */
                priv->spy_number = number;
        }

        /* Now, let the others play */
        orinoco_unlock(priv, &flags);

        return err;
}

static int orinoco_ioctl_getspy(struct net_device *dev, struct iw_point *srq)
{
        struct orinoco_private *priv = netdev_priv(dev);
        struct sockaddr address[IW_MAX_SPY];
        struct iw_quality spy_stat[IW_MAX_SPY];
        int number;
        int i;
        unsigned long flags;

        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;

        number = priv->spy_number;
        if ((number > 0) && (srq->pointer)) {
                /* Create address struct */
                for (i = 0; i < number; i++) {
                        memcpy(address[i].sa_data, priv->spy_address[i],
                               ETH_ALEN);
                        address[i].sa_family = AF_UNIX;
                }
                /* Copy stats */
                /* In theory, we should disable irqs while copying the stats
                 * because the rx path might update it in the middle...
                 * Bah, who care ? - Jean II */
                memcpy(&spy_stat, priv->spy_stat,
                       sizeof(struct iw_quality) * IW_MAX_SPY);
                for (i=0; i < number; i++)
                        priv->spy_stat[i].updated = 0;
        }

        orinoco_unlock(priv, &flags);

        /* Push stuff to user space */
        srq->length = number;
        if(copy_to_user(srq->pointer, address,
                         sizeof(struct sockaddr) * number))
                return -EFAULT;
        if(copy_to_user(srq->pointer + (sizeof(struct sockaddr)*number),
                        &spy_stat, sizeof(struct iw_quality) * number))
                return -EFAULT;

        return 0;
}

static int
orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
        struct orinoco_private *priv = netdev_priv(dev);
        struct iwreq *wrq = (struct iwreq *)rq;
        int err = 0;
        int tmp;
        int changed = 0;
        unsigned long flags;

        TRACE_ENTER(dev->name);

        /* In theory, we could allow most of the the SET stuff to be
         * done. In practice, the lapse of time at startup when the
         * card is not ready is very short, so why bother...  Note
         * that netif_device_present is different from up/down
         * (ifconfig), when the device is not yet up, it is usually
         * already ready...  Jean II */
        if (! netif_device_present(dev))
                return -ENODEV;

        switch (cmd) {
        case SIOCGIWNAME:
                strcpy(wrq->u.name, "IEEE 802.11-DS");
                break;
                
        case SIOCGIWAP:
                wrq->u.ap_addr.sa_family = ARPHRD_ETHER;
                err = orinoco_hw_get_bssid(priv, wrq->u.ap_addr.sa_data);
                break;

        case SIOCGIWRANGE:
                err = orinoco_ioctl_getiwrange(dev, &wrq->u.data);
                break;

        case SIOCSIWMODE:
                if (orinoco_lock(priv, &flags) != 0)
                        return -EBUSY;
                switch (wrq->u.mode) {
                case IW_MODE_ADHOC:
                        if (! (priv->has_ibss || priv->has_port3) )
                                err = -EINVAL;
                        else {
                                priv->iw_mode = IW_MODE_ADHOC;
                                changed = 1;
                        }
                        break;

                case IW_MODE_INFRA:
                        priv->iw_mode = IW_MODE_INFRA;
                        changed = 1;
                        break;

                default:
                        err = -EINVAL;
                        break;
                }
                set_port_type(priv);
                orinoco_unlock(priv, &flags);
                break;

        case SIOCGIWMODE:
                if (orinoco_lock(priv, &flags) != 0)
                        return -EBUSY;
                wrq->u.mode = priv->iw_mode;
                orinoco_unlock(priv, &flags);
                break;

        case SIOCSIWENCODE:
                err = orinoco_ioctl_setiwencode(dev, &wrq->u.encoding);
                if (! err)
                        changed = 1;
                break;

        case SIOCGIWENCODE:
                if (! capable(CAP_NET_ADMIN)) {
                        err = -EPERM;
                        break;
                }

                err = orinoco_ioctl_getiwencode(dev, &wrq->u.encoding);
                break;

        case SIOCSIWESSID:
                err = orinoco_ioctl_setessid(dev, &wrq->u.essid);
                if (! err)
                        changed = 1;
                break;

        case SIOCGIWESSID:
                err = orinoco_ioctl_getessid(dev, &wrq->u.essid);
                break;

        case SIOCSIWNICKN:
                err = orinoco_ioctl_setnick(dev, &wrq->u.data);
                if (! err)
                        changed = 1;
                break;

        case SIOCGIWNICKN:
                err = orinoco_ioctl_getnick(dev, &wrq->u.data);
                break;

        case SIOCGIWFREQ:
                tmp = orinoco_hw_get_freq(priv);
                if (tmp < 0) {
                        err = tmp;
                } else {
                        wrq->u.freq.m = tmp;
                        wrq->u.freq.e = 1;
                }
                break;

        case SIOCSIWFREQ:
                err = orinoco_ioctl_setfreq(dev, &wrq->u.freq);
                if (! err)
                        changed = 1;
                break;

        case SIOCGIWSENS:
                err = orinoco_ioctl_getsens(dev, &wrq->u.sens);
                break;

        case SIOCSIWSENS:
                err = orinoco_ioctl_setsens(dev, &wrq->u.sens);
                if (! err)
                        changed = 1;
                break;

        case SIOCGIWRTS:
                wrq->u.rts.value = priv->rts_thresh;
                wrq->u.rts.disabled = (wrq->u.rts.value == 2347);
                wrq->u.rts.fixed = 1;
                break;

        case SIOCSIWRTS:
                err = orinoco_ioctl_setrts(dev, &wrq->u.rts);
                if (! err)
                        changed = 1;
                break;

        case SIOCSIWFRAG:
                err = orinoco_ioctl_setfrag(dev, &wrq->u.frag);
                if (! err)
                        changed = 1;
                break;

        case SIOCGIWFRAG:
                err = orinoco_ioctl_getfrag(dev, &wrq->u.frag);
                break;

        case SIOCSIWRATE:
                err = orinoco_ioctl_setrate(dev, &wrq->u.bitrate);
                if (! err)
                        changed = 1;
                break;

        case SIOCGIWRATE:
                err = orinoco_ioctl_getrate(dev, &wrq->u.bitrate);
                break;

        case SIOCSIWPOWER:
                err = orinoco_ioctl_setpower(dev, &wrq->u.power);
                if (! err)
                        changed = 1;
                break;

        case SIOCGIWPOWER:
                err = orinoco_ioctl_getpower(dev, &wrq->u.power);
                break;

        case SIOCGIWTXPOW:
                /* The card only supports one tx power, so this is easy */
                wrq->u.txpower.value = 15; /* dBm */
                wrq->u.txpower.fixed = 1;
                wrq->u.txpower.disabled = 0;
                wrq->u.txpower.flags = IW_TXPOW_DBM;
                break;

        case SIOCSIWRETRY:
                err = -EOPNOTSUPP;
                break;

        case SIOCGIWRETRY:
                err = orinoco_ioctl_getretry(dev, &wrq->u.retry);
                break;

        case SIOCSIWSPY:
                err = orinoco_ioctl_setspy(dev, &wrq->u.data);
                break;

        case SIOCGIWSPY:
                err = orinoco_ioctl_getspy(dev, &wrq->u.data);
                break;

        case SIOCGIWPRIV:
                if (wrq->u.data.pointer) {
                        struct iw_priv_args privtab[] = {
                                { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" },
                                { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" },
                                { SIOCIWFIRSTPRIV + 0x2,
                                  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
                                  0, "set_port3" },
                                { SIOCIWFIRSTPRIV + 0x3, 0,
                                  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
                                  "get_port3" },
                                { SIOCIWFIRSTPRIV + 0x4,
                                  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
                                  0, "set_preamble" },
                                { SIOCIWFIRSTPRIV + 0x5, 0,
                                  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
                                  "get_preamble" },
                                { SIOCIWFIRSTPRIV + 0x6,
                                  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
                                  0, "set_ibssport" },
                                { SIOCIWFIRSTPRIV + 0x7, 0,
                                  IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
                                  "get_ibssport" },
                        };

                        wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]);
                        if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab)))
                                err = -EFAULT;
                }
                break;
               
        case SIOCIWFIRSTPRIV + 0x0: /* force_reset */
        case SIOCIWFIRSTPRIV + 0x1: /* card_reset */
                if (! capable(CAP_NET_ADMIN)) {
                        err = -EPERM;
                        break;
                }
                
                printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name);

                schedule_work(&priv->reset_work);
                break;

        case SIOCIWFIRSTPRIV + 0x2: /* set_port3 */
                if (! capable(CAP_NET_ADMIN)) {
                        err = -EPERM;
                        break;
                }

                err = orinoco_ioctl_setport3(dev, wrq);
                if (! err)
                        changed = 1;
                break;

        case SIOCIWFIRSTPRIV + 0x3: /* get_port3 */
                err = orinoco_ioctl_getport3(dev, wrq);
                break;

        case SIOCIWFIRSTPRIV + 0x4: /* set_preamble */
                if (! capable(CAP_NET_ADMIN)) {
                        err = -EPERM;
                        break;
                }

                /* 802.11b has recently defined some short preamble.
                 * Basically, the Phy header has been reduced in size.
                 * This increase performance, especially at high rates
                 * (the preamble is transmitted at 1Mb/s), unfortunately
                 * this give compatibility troubles... - Jean II */
                if(priv->has_preamble) {
                        int val = *( (int *) wrq->u.name );

                        if (orinoco_lock(priv, &flags) != 0)
                                return -EBUSY;
                        if (val)
                                priv->preamble = 1;
                        else
                                priv->preamble = 0;
                        orinoco_unlock(priv, &flags);
                        changed = 1;
                } else
                        err = -EOPNOTSUPP;
                break;

        case SIOCIWFIRSTPRIV + 0x5: /* get_preamble */
                if(priv->has_preamble) {
                        int *val = (int *)wrq->u.name;

                        if (orinoco_lock(priv, &flags) != 0)
                                return -EBUSY;
                        *val = priv->preamble;
                        orinoco_unlock(priv, &flags);
                } else
                        err = -EOPNOTSUPP;
                break;
        case SIOCIWFIRSTPRIV + 0x6: /* set_ibssport */
                if (! capable(CAP_NET_ADMIN)) {
                        err = -EPERM;
                        break;
                }

                err = orinoco_ioctl_setibssport(dev, wrq);
                if (! err)
                        changed = 1;
                break;

        case SIOCIWFIRSTPRIV + 0x7: /* get_ibssport */
                err = orinoco_ioctl_getibssport(dev, wrq);
                break;

        default:
                err = -EOPNOTSUPP;
        }
        
        if (! err && changed && netif_running(dev)) {
                err = orinoco_reconfigure(dev);
        }               

        TRACE_EXIT(dev->name);

        return err;
}


/********************************************************************/
/* Debugging                                                        */
/********************************************************************/

#if 0
static void show_rx_frame(struct orinoco_rxframe_hdr *frame)
{
        printk(KERN_DEBUG "RX descriptor:\n");
        printk(KERN_DEBUG "  status      = 0x%04x\n", frame->desc.status);
        printk(KERN_DEBUG "  time        = 0x%08x\n", frame->desc.time);
        printk(KERN_DEBUG "  silence     = 0x%02x\n", frame->desc.silence);
        printk(KERN_DEBUG "  signal      = 0x%02x\n", frame->desc.signal);
        printk(KERN_DEBUG "  rate        = 0x%02x\n", frame->desc.rate);
        printk(KERN_DEBUG "  rxflow      = 0x%02x\n", frame->desc.rxflow);
        printk(KERN_DEBUG "  reserved    = 0x%08x\n", frame->desc.reserved);

        printk(KERN_DEBUG "IEEE 802.11 header:\n");
        printk(KERN_DEBUG "  frame_ctl   = 0x%04x\n",
               frame->p80211.frame_ctl);
        printk(KERN_DEBUG "  duration_id = 0x%04x\n",
               frame->p80211.duration_id);
        printk(KERN_DEBUG "  addr1       = %02x:%02x:%02x:%02x:%02x:%02x\n",
               frame->p80211.addr1[0], frame->p80211.addr1[1],
               frame->p80211.addr1[2], frame->p80211.addr1[3],
               frame->p80211.addr1[4], frame->p80211.addr1[5]);
        printk(KERN_DEBUG "  addr2       = %02x:%02x:%02x:%02x:%02x:%02x\n",
               frame->p80211.addr2[0], frame->p80211.addr2[1],
               frame->p80211.addr2[2], frame->p80211.addr2[3],
               frame->p80211.addr2[4], frame->p80211.addr2[5]);
        printk(KERN_DEBUG "  addr3       = %02x:%02x:%02x:%02x:%02x:%02x\n",
               frame->p80211.addr3[0], frame->p80211.addr3[1],
               frame->p80211.addr3[2], frame->p80211.addr3[3],
               frame->p80211.addr3[4], frame->p80211.addr3[5]);
        printk(KERN_DEBUG "  seq_ctl     = 0x%04x\n",
               frame->p80211.seq_ctl);
        printk(KERN_DEBUG "  addr4       = %02x:%02x:%02x:%02x:%02x:%02x\n",
               frame->p80211.addr4[0], frame->p80211.addr4[1],
               frame->p80211.addr4[2], frame->p80211.addr4[3],
               frame->p80211.addr4[4], frame->p80211.addr4[5]);
        printk(KERN_DEBUG "  data_len    = 0x%04x\n",
               frame->p80211.data_len);

        printk(KERN_DEBUG "IEEE 802.3 header:\n");
        printk(KERN_DEBUG "  dest        = %02x:%02x:%02x:%02x:%02x:%02x\n",
               frame->p8023.h_dest[0], frame->p8023.h_dest[1],
               frame->p8023.h_dest[2], frame->p8023.h_dest[3],
               frame->p8023.h_dest[4], frame->p8023.h_dest[5]);
        printk(KERN_DEBUG "  src         = %02x:%02x:%02x:%02x:%02x:%02x\n",
               frame->p8023.h_source[0], frame->p8023.h_source[1],
               frame->p8023.h_source[2], frame->p8023.h_source[3],
               frame->p8023.h_source[4], frame->p8023.h_source[5]);
        printk(KERN_DEBUG "  len         = 0x%04x\n", frame->p8023.h_proto);

        printk(KERN_DEBUG "IEEE 802.2 LLC/SNAP header:\n");
        printk(KERN_DEBUG "  DSAP        = 0x%02x\n", frame->p8022.dsap);
        printk(KERN_DEBUG "  SSAP        = 0x%02x\n", frame->p8022.ssap);
        printk(KERN_DEBUG "  ctrl        = 0x%02x\n", frame->p8022.ctrl);
        printk(KERN_DEBUG "  OUI         = %02x:%02x:%02x\n",
               frame->p8022.oui[0], frame->p8022.oui[1], frame->p8022.oui[2]);
        printk(KERN_DEBUG "  ethertype  = 0x%04x\n", frame->ethertype);
}
#endif /* 0 */

/********************************************************************/
/* Module initialization                                            */
/********************************************************************/

EXPORT_SYMBOL(alloc_orinocodev);
EXPORT_SYMBOL(free_orinocodev);

EXPORT_SYMBOL(__orinoco_up);
EXPORT_SYMBOL(__orinoco_down);
EXPORT_SYMBOL(orinoco_stop);
EXPORT_SYMBOL(orinoco_reinit_firmware);

EXPORT_SYMBOL(orinoco_interrupt);

/* Can't be declared "const" or the whole __initdata section will
 * become const */
static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
        " (David Gibson <hermes@gibson.dropbear.id.au>, "
        "Pavel Roskin <proski@gnu.org>, et al)";

static int __init init_orinoco(void)
{
        printk(KERN_DEBUG "%s\n", version);
        return 0;
}

static void __exit exit_orinoco(void)
{
}

module_init(init_orinoco);
module_exit(exit_orinoco);