1 /******************************************************************************
3 * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * James P. Ketrenos <ipw2100-admin@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/version.h>
33 #include <linux/init.h>
34 #include <linux/pci.h>
35 #include <linux/dma-mapping.h>
36 #include <linux/delay.h>
37 #include <linux/skbuff.h>
38 #include <linux/netdevice.h>
39 #include <linux/wireless.h>
40 #include <linux/firmware.h>
41 #include <linux/etherdevice.h>
42 #include <linux/if_arp.h>
44 #include <net/ieee80211_radiotap.h>
45 #include <net/mac80211.h>
47 #include <asm/div64.h>
49 #include "iwl-3945-core.h"
51 #include "iwl-helpers.h"
53 #ifdef CONFIG_IWL3945_DEBUG
54 u32 iwl3945_debug_level;
57 static int iwl3945_tx_queue_update_write_ptr(struct iwl3945_priv *priv,
58 struct iwl3945_tx_queue *txq);
60 /******************************************************************************
64 ******************************************************************************/
66 /* module parameters */
67 static int iwl3945_param_disable_hw_scan; /* def: 0 = use 3945's h/w scan */
68 static int iwl3945_param_debug; /* def: 0 = minimal debug log messages */
69 static int iwl3945_param_disable; /* def: 0 = enable radio */
70 static int iwl3945_param_antenna; /* def: 0 = both antennas (use diversity) */
71 int iwl3945_param_hwcrypto; /* def: 0 = use software encryption */
72 static int iwl3945_param_qos_enable = 1; /* def: 1 = use quality of service */
73 int iwl3945_param_queues_num = IWL_MAX_NUM_QUEUES; /* def: 8 Tx queues */
76 * module name, copyright, version, etc.
77 * NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk
80 #define DRV_DESCRIPTION \
81 "Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
83 #ifdef CONFIG_IWL3945_DEBUG
89 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
95 #define IWLWIFI_VERSION "1.2.26k" VD VS
96 #define DRV_COPYRIGHT "Copyright(c) 2003-2008 Intel Corporation"
97 #define DRV_VERSION IWLWIFI_VERSION
100 MODULE_DESCRIPTION(DRV_DESCRIPTION);
101 MODULE_VERSION(DRV_VERSION);
102 MODULE_AUTHOR(DRV_COPYRIGHT);
103 MODULE_LICENSE("GPL");
105 static __le16 *ieee80211_get_qos_ctrl(struct ieee80211_hdr *hdr)
107 u16 fc = le16_to_cpu(hdr->frame_control);
108 int hdr_len = ieee80211_get_hdrlen(fc);
110 if ((fc & 0x00cc) == (IEEE80211_STYPE_QOS_DATA | IEEE80211_FTYPE_DATA))
111 return (__le16 *) ((u8 *) hdr + hdr_len - QOS_CONTROL_LEN);
115 static const struct ieee80211_supported_band *iwl3945_get_band(
116 struct iwl3945_priv *priv, enum ieee80211_band band)
118 return priv->hw->wiphy->bands[band];
121 static int iwl3945_is_empty_essid(const char *essid, int essid_len)
123 /* Single white space is for Linksys APs */
124 if (essid_len == 1 && essid[0] == ' ')
127 /* Otherwise, if the entire essid is 0, we assume it is hidden */
130 if (essid[essid_len] != '\0')
137 static const char *iwl3945_escape_essid(const char *essid, u8 essid_len)
139 static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
140 const char *s = essid;
143 if (iwl3945_is_empty_essid(essid, essid_len)) {
144 memcpy(escaped, "<hidden>", sizeof("<hidden>"));
148 essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE);
149 while (essid_len--) {
161 /*************** DMA-QUEUE-GENERAL-FUNCTIONS *****
164 * Theory of operation
166 * A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer
167 * of buffer descriptors, each of which points to one or more data buffers for
168 * the device to read from or fill. Driver and device exchange status of each
169 * queue via "read" and "write" pointers. Driver keeps minimum of 2 empty
170 * entries in each circular buffer, to protect against confusing empty and full
173 * The device reads or writes the data in the queues via the device's several
174 * DMA/FIFO channels. Each queue is mapped to a single DMA channel.
176 * For Tx queue, there are low mark and high mark limits. If, after queuing
177 * the packet for Tx, free space become < low mark, Tx queue stopped. When
178 * reclaiming packets (on 'tx done IRQ), if free space become > high mark,
181 * The 3945 operates with six queues: One receive queue, one transmit queue
182 * (#4) for sending commands to the device firmware, and four transmit queues
183 * (#0-3) for data tx via EDCA. An additional 2 HCCA queues are unused.
184 ***************************************************/
186 int iwl3945_queue_space(const struct iwl3945_queue *q)
188 int s = q->read_ptr - q->write_ptr;
190 if (q->read_ptr > q->write_ptr)
195 /* keep some reserve to not confuse empty and full situations */
202 int iwl3945_x2_queue_used(const struct iwl3945_queue *q, int i)
204 return q->write_ptr > q->read_ptr ?
205 (i >= q->read_ptr && i < q->write_ptr) :
206 !(i < q->read_ptr && i >= q->write_ptr);
210 static inline u8 get_cmd_index(struct iwl3945_queue *q, u32 index, int is_huge)
212 /* This is for scan command, the big buffer at end of command array */
214 return q->n_window; /* must be power of 2 */
216 /* Otherwise, use normal size buffers */
217 return index & (q->n_window - 1);
221 * iwl3945_queue_init - Initialize queue's high/low-water and read/write indexes
223 static int iwl3945_queue_init(struct iwl3945_priv *priv, struct iwl3945_queue *q,
224 int count, int slots_num, u32 id)
227 q->n_window = slots_num;
230 /* count must be power-of-two size, otherwise iwl_queue_inc_wrap
231 * and iwl_queue_dec_wrap are broken. */
232 BUG_ON(!is_power_of_2(count));
234 /* slots_num must be power-of-two size, otherwise
235 * get_cmd_index is broken. */
236 BUG_ON(!is_power_of_2(slots_num));
238 q->low_mark = q->n_window / 4;
242 q->high_mark = q->n_window / 8;
243 if (q->high_mark < 2)
246 q->write_ptr = q->read_ptr = 0;
252 * iwl3945_tx_queue_alloc - Alloc driver data and TFD CB for one Tx/cmd queue
254 static int iwl3945_tx_queue_alloc(struct iwl3945_priv *priv,
255 struct iwl3945_tx_queue *txq, u32 id)
257 struct pci_dev *dev = priv->pci_dev;
259 /* Driver private data, only for Tx (not command) queues,
260 * not shared with device. */
261 if (id != IWL_CMD_QUEUE_NUM) {
262 txq->txb = kmalloc(sizeof(txq->txb[0]) *
263 TFD_QUEUE_SIZE_MAX, GFP_KERNEL);
265 IWL_ERROR("kmalloc for auxiliary BD "
266 "structures failed\n");
272 /* Circular buffer of transmit frame descriptors (TFDs),
273 * shared with device */
274 txq->bd = pci_alloc_consistent(dev,
275 sizeof(txq->bd[0]) * TFD_QUEUE_SIZE_MAX,
279 IWL_ERROR("pci_alloc_consistent(%zd) failed\n",
280 sizeof(txq->bd[0]) * TFD_QUEUE_SIZE_MAX);
297 * iwl3945_tx_queue_init - Allocate and initialize one tx/cmd queue
299 int iwl3945_tx_queue_init(struct iwl3945_priv *priv,
300 struct iwl3945_tx_queue *txq, int slots_num, u32 txq_id)
302 struct pci_dev *dev = priv->pci_dev;
307 * Alloc buffer array for commands (Tx or other types of commands).
308 * For the command queue (#4), allocate command space + one big
309 * command for scan, since scan command is very huge; the system will
310 * not have two scans at the same time, so only one is needed.
311 * For data Tx queues (all other queues), no super-size command
314 len = sizeof(struct iwl3945_cmd) * slots_num;
315 if (txq_id == IWL_CMD_QUEUE_NUM)
316 len += IWL_MAX_SCAN_SIZE;
317 txq->cmd = pci_alloc_consistent(dev, len, &txq->dma_addr_cmd);
321 /* Alloc driver data array and TFD circular buffer */
322 rc = iwl3945_tx_queue_alloc(priv, txq, txq_id);
324 pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd);
328 txq->need_update = 0;
330 /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
331 * iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */
332 BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1));
334 /* Initialize queue high/low-water, head/tail indexes */
335 iwl3945_queue_init(priv, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
337 /* Tell device where to find queue, enable DMA channel. */
338 iwl3945_hw_tx_queue_init(priv, txq);
344 * iwl3945_tx_queue_free - Deallocate DMA queue.
345 * @txq: Transmit queue to deallocate.
347 * Empty queue by removing and destroying all BD's.
349 * 0-fill, but do not free "txq" descriptor structure.
351 void iwl3945_tx_queue_free(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq)
353 struct iwl3945_queue *q = &txq->q;
354 struct pci_dev *dev = priv->pci_dev;
360 /* first, empty all BD's */
361 for (; q->write_ptr != q->read_ptr;
362 q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd))
363 iwl3945_hw_txq_free_tfd(priv, txq);
365 len = sizeof(struct iwl3945_cmd) * q->n_window;
366 if (q->id == IWL_CMD_QUEUE_NUM)
367 len += IWL_MAX_SCAN_SIZE;
369 /* De-alloc array of command/tx buffers */
370 pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd);
372 /* De-alloc circular buffer of TFDs */
374 pci_free_consistent(dev, sizeof(struct iwl3945_tfd_frame) *
375 txq->q.n_bd, txq->bd, txq->q.dma_addr);
377 /* De-alloc array of per-TFD driver data */
383 /* 0-fill queue descriptor structure */
384 memset(txq, 0, sizeof(*txq));
387 const u8 iwl3945_broadcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
389 /*************** STATION TABLE MANAGEMENT ****
390 * mac80211 should be examined to determine if sta_info is duplicating
391 * the functionality provided here
394 /**************************************************************/
395 #if 0 /* temporary disable till we add real remove station */
397 * iwl3945_remove_station - Remove driver's knowledge of station.
399 * NOTE: This does not remove station from device's station table.
401 static u8 iwl3945_remove_station(struct iwl3945_priv *priv, const u8 *addr, int is_ap)
403 int index = IWL_INVALID_STATION;
407 spin_lock_irqsave(&priv->sta_lock, flags);
411 else if (is_broadcast_ether_addr(addr))
412 index = priv->hw_setting.bcast_sta_id;
414 for (i = IWL_STA_ID; i < priv->hw_setting.max_stations; i++)
415 if (priv->stations[i].used &&
416 !compare_ether_addr(priv->stations[i].sta.sta.addr,
422 if (unlikely(index == IWL_INVALID_STATION))
425 if (priv->stations[index].used) {
426 priv->stations[index].used = 0;
427 priv->num_stations--;
430 BUG_ON(priv->num_stations < 0);
433 spin_unlock_irqrestore(&priv->sta_lock, flags);
439 * iwl3945_clear_stations_table - Clear the driver's station table
441 * NOTE: This does not clear or otherwise alter the device's station table.
443 static void iwl3945_clear_stations_table(struct iwl3945_priv *priv)
447 spin_lock_irqsave(&priv->sta_lock, flags);
449 priv->num_stations = 0;
450 memset(priv->stations, 0, sizeof(priv->stations));
452 spin_unlock_irqrestore(&priv->sta_lock, flags);
456 * iwl3945_add_station - Add station to station tables in driver and device
458 u8 iwl3945_add_station(struct iwl3945_priv *priv, const u8 *addr, int is_ap, u8 flags)
461 int index = IWL_INVALID_STATION;
462 struct iwl3945_station_entry *station;
463 unsigned long flags_spin;
464 DECLARE_MAC_BUF(mac);
467 spin_lock_irqsave(&priv->sta_lock, flags_spin);
470 else if (is_broadcast_ether_addr(addr))
471 index = priv->hw_setting.bcast_sta_id;
473 for (i = IWL_STA_ID; i < priv->hw_setting.max_stations; i++) {
474 if (!compare_ether_addr(priv->stations[i].sta.sta.addr,
480 if (!priv->stations[i].used &&
481 index == IWL_INVALID_STATION)
485 /* These two conditions has the same outcome but keep them separate
486 since they have different meaning */
487 if (unlikely(index == IWL_INVALID_STATION)) {
488 spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
492 if (priv->stations[index].used &&
493 !compare_ether_addr(priv->stations[index].sta.sta.addr, addr)) {
494 spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
498 IWL_DEBUG_ASSOC("Add STA ID %d: %s\n", index, print_mac(mac, addr));
499 station = &priv->stations[index];
501 priv->num_stations++;
503 /* Set up the REPLY_ADD_STA command to send to device */
504 memset(&station->sta, 0, sizeof(struct iwl3945_addsta_cmd));
505 memcpy(station->sta.sta.addr, addr, ETH_ALEN);
506 station->sta.mode = 0;
507 station->sta.sta.sta_id = index;
508 station->sta.station_flags = 0;
510 if (priv->band == IEEE80211_BAND_5GHZ)
511 rate = IWL_RATE_6M_PLCP;
513 rate = IWL_RATE_1M_PLCP;
515 /* Turn on both antennas for the station... */
516 station->sta.rate_n_flags =
517 iwl3945_hw_set_rate_n_flags(rate, RATE_MCS_ANT_AB_MSK);
518 station->current_rate.rate_n_flags =
519 le16_to_cpu(station->sta.rate_n_flags);
521 spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
523 /* Add station to device's station table */
524 iwl3945_send_add_station(priv, &station->sta, flags);
529 /*************** DRIVER STATUS FUNCTIONS *****/
531 static inline int iwl3945_is_ready(struct iwl3945_priv *priv)
533 /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
534 * set but EXIT_PENDING is not */
535 return test_bit(STATUS_READY, &priv->status) &&
536 test_bit(STATUS_GEO_CONFIGURED, &priv->status) &&
537 !test_bit(STATUS_EXIT_PENDING, &priv->status);
540 static inline int iwl3945_is_alive(struct iwl3945_priv *priv)
542 return test_bit(STATUS_ALIVE, &priv->status);
545 static inline int iwl3945_is_init(struct iwl3945_priv *priv)
547 return test_bit(STATUS_INIT, &priv->status);
550 static inline int iwl3945_is_rfkill(struct iwl3945_priv *priv)
552 return test_bit(STATUS_RF_KILL_HW, &priv->status) ||
553 test_bit(STATUS_RF_KILL_SW, &priv->status);
556 static inline int iwl3945_is_ready_rf(struct iwl3945_priv *priv)
559 if (iwl3945_is_rfkill(priv))
562 return iwl3945_is_ready(priv);
565 /*************** HOST COMMAND QUEUE FUNCTIONS *****/
567 #define IWL_CMD(x) case x : return #x
569 static const char *get_cmd_string(u8 cmd)
572 IWL_CMD(REPLY_ALIVE);
573 IWL_CMD(REPLY_ERROR);
575 IWL_CMD(REPLY_RXON_ASSOC);
576 IWL_CMD(REPLY_QOS_PARAM);
577 IWL_CMD(REPLY_RXON_TIMING);
578 IWL_CMD(REPLY_ADD_STA);
579 IWL_CMD(REPLY_REMOVE_STA);
580 IWL_CMD(REPLY_REMOVE_ALL_STA);
581 IWL_CMD(REPLY_3945_RX);
583 IWL_CMD(REPLY_RATE_SCALE);
584 IWL_CMD(REPLY_LEDS_CMD);
585 IWL_CMD(REPLY_TX_LINK_QUALITY_CMD);
586 IWL_CMD(RADAR_NOTIFICATION);
587 IWL_CMD(REPLY_QUIET_CMD);
588 IWL_CMD(REPLY_CHANNEL_SWITCH);
589 IWL_CMD(CHANNEL_SWITCH_NOTIFICATION);
590 IWL_CMD(REPLY_SPECTRUM_MEASUREMENT_CMD);
591 IWL_CMD(SPECTRUM_MEASURE_NOTIFICATION);
592 IWL_CMD(POWER_TABLE_CMD);
593 IWL_CMD(PM_SLEEP_NOTIFICATION);
594 IWL_CMD(PM_DEBUG_STATISTIC_NOTIFIC);
595 IWL_CMD(REPLY_SCAN_CMD);
596 IWL_CMD(REPLY_SCAN_ABORT_CMD);
597 IWL_CMD(SCAN_START_NOTIFICATION);
598 IWL_CMD(SCAN_RESULTS_NOTIFICATION);
599 IWL_CMD(SCAN_COMPLETE_NOTIFICATION);
600 IWL_CMD(BEACON_NOTIFICATION);
601 IWL_CMD(REPLY_TX_BEACON);
602 IWL_CMD(WHO_IS_AWAKE_NOTIFICATION);
603 IWL_CMD(QUIET_NOTIFICATION);
604 IWL_CMD(REPLY_TX_PWR_TABLE_CMD);
605 IWL_CMD(MEASURE_ABORT_NOTIFICATION);
606 IWL_CMD(REPLY_BT_CONFIG);
607 IWL_CMD(REPLY_STATISTICS_CMD);
608 IWL_CMD(STATISTICS_NOTIFICATION);
609 IWL_CMD(REPLY_CARD_STATE_CMD);
610 IWL_CMD(CARD_STATE_NOTIFICATION);
611 IWL_CMD(MISSED_BEACONS_NOTIFICATION);
618 #define HOST_COMPLETE_TIMEOUT (HZ / 2)
621 * iwl3945_enqueue_hcmd - enqueue a uCode command
622 * @priv: device private data point
623 * @cmd: a point to the ucode command structure
625 * The function returns < 0 values to indicate the operation is
626 * failed. On success, it turns the index (> 0) of command in the
629 static int iwl3945_enqueue_hcmd(struct iwl3945_priv *priv, struct iwl3945_host_cmd *cmd)
631 struct iwl3945_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM];
632 struct iwl3945_queue *q = &txq->q;
633 struct iwl3945_tfd_frame *tfd;
635 struct iwl3945_cmd *out_cmd;
637 u16 fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr));
638 dma_addr_t phys_addr;
644 /* If any of the command structures end up being larger than
645 * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then
646 * we will need to increase the size of the TFD entries */
647 BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
648 !(cmd->meta.flags & CMD_SIZE_HUGE));
651 if (iwl3945_is_rfkill(priv)) {
652 IWL_DEBUG_INFO("Not sending command - RF KILL");
656 if (iwl3945_queue_space(q) < ((cmd->meta.flags & CMD_ASYNC) ? 2 : 1)) {
657 IWL_ERROR("No space for Tx\n");
661 spin_lock_irqsave(&priv->hcmd_lock, flags);
663 tfd = &txq->bd[q->write_ptr];
664 memset(tfd, 0, sizeof(*tfd));
666 control_flags = (u32 *) tfd;
668 idx = get_cmd_index(q, q->write_ptr, cmd->meta.flags & CMD_SIZE_HUGE);
669 out_cmd = &txq->cmd[idx];
671 out_cmd->hdr.cmd = cmd->id;
672 memcpy(&out_cmd->meta, &cmd->meta, sizeof(cmd->meta));
673 memcpy(&out_cmd->cmd.payload, cmd->data, cmd->len);
675 /* At this point, the out_cmd now has all of the incoming cmd
678 out_cmd->hdr.flags = 0;
679 out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM) |
680 INDEX_TO_SEQ(q->write_ptr));
681 if (out_cmd->meta.flags & CMD_SIZE_HUGE)
682 out_cmd->hdr.sequence |= cpu_to_le16(SEQ_HUGE_FRAME);
684 phys_addr = txq->dma_addr_cmd + sizeof(txq->cmd[0]) * idx +
685 offsetof(struct iwl3945_cmd, hdr);
686 iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, fix_size);
688 pad = U32_PAD(cmd->len);
689 count = TFD_CTL_COUNT_GET(*control_flags);
690 *control_flags = TFD_CTL_COUNT_SET(count) | TFD_CTL_PAD_SET(pad);
692 IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, "
693 "%d bytes at %d[%d]:%d\n",
694 get_cmd_string(out_cmd->hdr.cmd),
695 out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence),
696 fix_size, q->write_ptr, idx, IWL_CMD_QUEUE_NUM);
698 txq->need_update = 1;
700 /* Increment and update queue's write index */
701 q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
702 ret = iwl3945_tx_queue_update_write_ptr(priv, txq);
704 spin_unlock_irqrestore(&priv->hcmd_lock, flags);
705 return ret ? ret : idx;
708 static int iwl3945_send_cmd_async(struct iwl3945_priv *priv, struct iwl3945_host_cmd *cmd)
712 BUG_ON(!(cmd->meta.flags & CMD_ASYNC));
714 /* An asynchronous command can not expect an SKB to be set. */
715 BUG_ON(cmd->meta.flags & CMD_WANT_SKB);
717 /* An asynchronous command MUST have a callback. */
718 BUG_ON(!cmd->meta.u.callback);
720 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
723 ret = iwl3945_enqueue_hcmd(priv, cmd);
725 IWL_ERROR("Error sending %s: iwl3945_enqueue_hcmd failed: %d\n",
726 get_cmd_string(cmd->id), ret);
732 static int iwl3945_send_cmd_sync(struct iwl3945_priv *priv, struct iwl3945_host_cmd *cmd)
737 BUG_ON(cmd->meta.flags & CMD_ASYNC);
739 /* A synchronous command can not have a callback set. */
740 BUG_ON(cmd->meta.u.callback != NULL);
742 if (test_and_set_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status)) {
743 IWL_ERROR("Error sending %s: Already sending a host command\n",
744 get_cmd_string(cmd->id));
749 set_bit(STATUS_HCMD_ACTIVE, &priv->status);
751 if (cmd->meta.flags & CMD_WANT_SKB)
752 cmd->meta.source = &cmd->meta;
754 cmd_idx = iwl3945_enqueue_hcmd(priv, cmd);
757 IWL_ERROR("Error sending %s: iwl3945_enqueue_hcmd failed: %d\n",
758 get_cmd_string(cmd->id), ret);
762 ret = wait_event_interruptible_timeout(priv->wait_command_queue,
763 !test_bit(STATUS_HCMD_ACTIVE, &priv->status),
764 HOST_COMPLETE_TIMEOUT);
766 if (test_bit(STATUS_HCMD_ACTIVE, &priv->status)) {
767 IWL_ERROR("Error sending %s: time out after %dms.\n",
768 get_cmd_string(cmd->id),
769 jiffies_to_msecs(HOST_COMPLETE_TIMEOUT));
771 clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
777 if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
778 IWL_DEBUG_INFO("Command %s aborted: RF KILL Switch\n",
779 get_cmd_string(cmd->id));
783 if (test_bit(STATUS_FW_ERROR, &priv->status)) {
784 IWL_DEBUG_INFO("Command %s failed: FW Error\n",
785 get_cmd_string(cmd->id));
789 if ((cmd->meta.flags & CMD_WANT_SKB) && !cmd->meta.u.skb) {
790 IWL_ERROR("Error: Response NULL in '%s'\n",
791 get_cmd_string(cmd->id));
800 if (cmd->meta.flags & CMD_WANT_SKB) {
801 struct iwl3945_cmd *qcmd;
803 /* Cancel the CMD_WANT_SKB flag for the cmd in the
804 * TX cmd queue. Otherwise in case the cmd comes
805 * in later, it will possibly set an invalid
806 * address (cmd->meta.source). */
807 qcmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx];
808 qcmd->meta.flags &= ~CMD_WANT_SKB;
811 if (cmd->meta.u.skb) {
812 dev_kfree_skb_any(cmd->meta.u.skb);
813 cmd->meta.u.skb = NULL;
816 clear_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status);
820 int iwl3945_send_cmd(struct iwl3945_priv *priv, struct iwl3945_host_cmd *cmd)
822 if (cmd->meta.flags & CMD_ASYNC)
823 return iwl3945_send_cmd_async(priv, cmd);
825 return iwl3945_send_cmd_sync(priv, cmd);
828 int iwl3945_send_cmd_pdu(struct iwl3945_priv *priv, u8 id, u16 len, const void *data)
830 struct iwl3945_host_cmd cmd = {
836 return iwl3945_send_cmd_sync(priv, &cmd);
839 static int __must_check iwl3945_send_cmd_u32(struct iwl3945_priv *priv, u8 id, u32 val)
841 struct iwl3945_host_cmd cmd = {
847 return iwl3945_send_cmd_sync(priv, &cmd);
850 int iwl3945_send_statistics_request(struct iwl3945_priv *priv)
852 return iwl3945_send_cmd_u32(priv, REPLY_STATISTICS_CMD, 0);
856 * iwl3945_set_rxon_channel - Set the phymode and channel values in staging RXON
857 * @band: 2.4 or 5 GHz band
858 * @channel: Any channel valid for the requested band
860 * In addition to setting the staging RXON, priv->band is also set.
862 * NOTE: Does not commit to the hardware; it sets appropriate bit fields
863 * in the staging RXON flag structure based on the band
865 static int iwl3945_set_rxon_channel(struct iwl3945_priv *priv,
866 enum ieee80211_band band,
869 if (!iwl3945_get_channel_info(priv, band, channel)) {
870 IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
875 if ((le16_to_cpu(priv->staging_rxon.channel) == channel) &&
876 (priv->band == band))
879 priv->staging_rxon.channel = cpu_to_le16(channel);
880 if (band == IEEE80211_BAND_5GHZ)
881 priv->staging_rxon.flags &= ~RXON_FLG_BAND_24G_MSK;
883 priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
887 IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, band);
893 * iwl3945_check_rxon_cmd - validate RXON structure is valid
895 * NOTE: This is really only useful during development and can eventually
896 * be #ifdef'd out once the driver is stable and folks aren't actively
899 static int iwl3945_check_rxon_cmd(struct iwl3945_rxon_cmd *rxon)
904 if (rxon->flags & RXON_FLG_BAND_24G_MSK) {
905 error |= le32_to_cpu(rxon->flags &
906 (RXON_FLG_TGJ_NARROW_BAND_MSK |
907 RXON_FLG_RADAR_DETECT_MSK));
909 IWL_WARNING("check 24G fields %d | %d\n",
912 error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ?
913 0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK);
915 IWL_WARNING("check 52 fields %d | %d\n",
917 error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK);
919 IWL_WARNING("check 52 CCK %d | %d\n",
922 error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1;
924 IWL_WARNING("check mac addr %d | %d\n", counter++, error);
926 /* make sure basic rates 6Mbps and 1Mbps are supported */
927 error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) &&
928 ((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0));
930 IWL_WARNING("check basic rate %d | %d\n", counter++, error);
932 error |= (le16_to_cpu(rxon->assoc_id) > 2007);
934 IWL_WARNING("check assoc id %d | %d\n", counter++, error);
936 error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK))
937 == (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK));
939 IWL_WARNING("check CCK and short slot %d | %d\n",
942 error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK))
943 == (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK));
945 IWL_WARNING("check CCK & auto detect %d | %d\n",
948 error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK |
949 RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK);
951 IWL_WARNING("check TGG and auto detect %d | %d\n",
954 if ((rxon->flags & RXON_FLG_DIS_DIV_MSK))
955 error |= ((rxon->flags & (RXON_FLG_ANT_B_MSK |
956 RXON_FLG_ANT_A_MSK)) == 0);
958 IWL_WARNING("check antenna %d %d\n", counter++, error);
961 IWL_WARNING("Tuning to channel %d\n",
962 le16_to_cpu(rxon->channel));
965 IWL_ERROR("Not a valid iwl3945_rxon_assoc_cmd field values\n");
972 * iwl3945_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
973 * @priv: staging_rxon is compared to active_rxon
975 * If the RXON structure is changing enough to require a new tune,
976 * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
977 * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
979 static int iwl3945_full_rxon_required(struct iwl3945_priv *priv)
982 /* These items are only settable from the full RXON command */
983 if (!(priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ||
984 compare_ether_addr(priv->staging_rxon.bssid_addr,
985 priv->active_rxon.bssid_addr) ||
986 compare_ether_addr(priv->staging_rxon.node_addr,
987 priv->active_rxon.node_addr) ||
988 compare_ether_addr(priv->staging_rxon.wlap_bssid_addr,
989 priv->active_rxon.wlap_bssid_addr) ||
990 (priv->staging_rxon.dev_type != priv->active_rxon.dev_type) ||
991 (priv->staging_rxon.channel != priv->active_rxon.channel) ||
992 (priv->staging_rxon.air_propagation !=
993 priv->active_rxon.air_propagation) ||
994 (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id))
997 /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
998 * be updated with the RXON_ASSOC command -- however only some
999 * flag transitions are allowed using RXON_ASSOC */
1001 /* Check if we are not switching bands */
1002 if ((priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) !=
1003 (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK))
1006 /* Check if we are switching association toggle */
1007 if ((priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) !=
1008 (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK))
1014 static int iwl3945_send_rxon_assoc(struct iwl3945_priv *priv)
1017 struct iwl3945_rx_packet *res = NULL;
1018 struct iwl3945_rxon_assoc_cmd rxon_assoc;
1019 struct iwl3945_host_cmd cmd = {
1020 .id = REPLY_RXON_ASSOC,
1021 .len = sizeof(rxon_assoc),
1022 .meta.flags = CMD_WANT_SKB,
1023 .data = &rxon_assoc,
1025 const struct iwl3945_rxon_cmd *rxon1 = &priv->staging_rxon;
1026 const struct iwl3945_rxon_cmd *rxon2 = &priv->active_rxon;
1028 if ((rxon1->flags == rxon2->flags) &&
1029 (rxon1->filter_flags == rxon2->filter_flags) &&
1030 (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
1031 (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
1032 IWL_DEBUG_INFO("Using current RXON_ASSOC. Not resending.\n");
1036 rxon_assoc.flags = priv->staging_rxon.flags;
1037 rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
1038 rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
1039 rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
1040 rxon_assoc.reserved = 0;
1042 rc = iwl3945_send_cmd_sync(priv, &cmd);
1046 res = (struct iwl3945_rx_packet *)cmd.meta.u.skb->data;
1047 if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
1048 IWL_ERROR("Bad return from REPLY_RXON_ASSOC command\n");
1052 priv->alloc_rxb_skb--;
1053 dev_kfree_skb_any(cmd.meta.u.skb);
1059 * iwl3945_commit_rxon - commit staging_rxon to hardware
1061 * The RXON command in staging_rxon is committed to the hardware and
1062 * the active_rxon structure is updated with the new data. This
1063 * function correctly transitions out of the RXON_ASSOC_MSK state if
1064 * a HW tune is required based on the RXON structure changes.
1066 static int iwl3945_commit_rxon(struct iwl3945_priv *priv)
1068 /* cast away the const for active_rxon in this function */
1069 struct iwl3945_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
1071 DECLARE_MAC_BUF(mac);
1073 if (!iwl3945_is_alive(priv))
1076 /* always get timestamp with Rx frame */
1077 priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
1079 /* select antenna */
1080 priv->staging_rxon.flags &=
1081 ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
1082 priv->staging_rxon.flags |= iwl3945_get_antenna_flags(priv);
1084 rc = iwl3945_check_rxon_cmd(&priv->staging_rxon);
1086 IWL_ERROR("Invalid RXON configuration. Not committing.\n");
1090 /* If we don't need to send a full RXON, we can use
1091 * iwl3945_rxon_assoc_cmd which is used to reconfigure filter
1092 * and other flags for the current radio configuration. */
1093 if (!iwl3945_full_rxon_required(priv)) {
1094 rc = iwl3945_send_rxon_assoc(priv);
1096 IWL_ERROR("Error setting RXON_ASSOC "
1097 "configuration (%d).\n", rc);
1101 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
1106 /* If we are currently associated and the new config requires
1107 * an RXON_ASSOC and the new config wants the associated mask enabled,
1108 * we must clear the associated from the active configuration
1109 * before we apply the new config */
1110 if (iwl3945_is_associated(priv) &&
1111 (priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK)) {
1112 IWL_DEBUG_INFO("Toggling associated bit on current RXON\n");
1113 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
1115 rc = iwl3945_send_cmd_pdu(priv, REPLY_RXON,
1116 sizeof(struct iwl3945_rxon_cmd),
1117 &priv->active_rxon);
1119 /* If the mask clearing failed then we set
1120 * active_rxon back to what it was previously */
1122 active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
1123 IWL_ERROR("Error clearing ASSOC_MSK on current "
1124 "configuration (%d).\n", rc);
1129 IWL_DEBUG_INFO("Sending RXON\n"
1130 "* with%s RXON_FILTER_ASSOC_MSK\n"
1133 ((priv->staging_rxon.filter_flags &
1134 RXON_FILTER_ASSOC_MSK) ? "" : "out"),
1135 le16_to_cpu(priv->staging_rxon.channel),
1136 print_mac(mac, priv->staging_rxon.bssid_addr));
1138 /* Apply the new configuration */
1139 rc = iwl3945_send_cmd_pdu(priv, REPLY_RXON,
1140 sizeof(struct iwl3945_rxon_cmd), &priv->staging_rxon);
1142 IWL_ERROR("Error setting new configuration (%d).\n", rc);
1146 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
1148 iwl3945_clear_stations_table(priv);
1150 /* If we issue a new RXON command which required a tune then we must
1151 * send a new TXPOWER command or we won't be able to Tx any frames */
1152 rc = iwl3945_hw_reg_send_txpower(priv);
1154 IWL_ERROR("Error setting Tx power (%d).\n", rc);
1158 /* Add the broadcast address so we can send broadcast frames */
1159 if (iwl3945_add_station(priv, iwl3945_broadcast_addr, 0, 0) ==
1160 IWL_INVALID_STATION) {
1161 IWL_ERROR("Error adding BROADCAST address for transmit.\n");
1165 /* If we have set the ASSOC_MSK and we are in BSS mode then
1166 * add the IWL_AP_ID to the station rate table */
1167 if (iwl3945_is_associated(priv) &&
1168 (priv->iw_mode == IEEE80211_IF_TYPE_STA))
1169 if (iwl3945_add_station(priv, priv->active_rxon.bssid_addr, 1, 0)
1170 == IWL_INVALID_STATION) {
1171 IWL_ERROR("Error adding AP address for transmit.\n");
1175 /* Init the hardware's rate fallback order based on the band */
1176 rc = iwl3945_init_hw_rate_table(priv);
1178 IWL_ERROR("Error setting HW rate table: %02X\n", rc);
1185 static int iwl3945_send_bt_config(struct iwl3945_priv *priv)
1187 struct iwl3945_bt_cmd bt_cmd = {
1195 return iwl3945_send_cmd_pdu(priv, REPLY_BT_CONFIG,
1196 sizeof(struct iwl3945_bt_cmd), &bt_cmd);
1199 static int iwl3945_send_scan_abort(struct iwl3945_priv *priv)
1202 struct iwl3945_rx_packet *res;
1203 struct iwl3945_host_cmd cmd = {
1204 .id = REPLY_SCAN_ABORT_CMD,
1205 .meta.flags = CMD_WANT_SKB,
1208 /* If there isn't a scan actively going on in the hardware
1209 * then we are in between scan bands and not actually
1210 * actively scanning, so don't send the abort command */
1211 if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
1212 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
1216 rc = iwl3945_send_cmd_sync(priv, &cmd);
1218 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
1222 res = (struct iwl3945_rx_packet *)cmd.meta.u.skb->data;
1223 if (res->u.status != CAN_ABORT_STATUS) {
1224 /* The scan abort will return 1 for success or
1225 * 2 for "failure". A failure condition can be
1226 * due to simply not being in an active scan which
1227 * can occur if we send the scan abort before we
1228 * the microcode has notified us that a scan is
1230 IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status);
1231 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
1232 clear_bit(STATUS_SCAN_HW, &priv->status);
1235 dev_kfree_skb_any(cmd.meta.u.skb);
1240 static int iwl3945_card_state_sync_callback(struct iwl3945_priv *priv,
1241 struct iwl3945_cmd *cmd,
1242 struct sk_buff *skb)
1250 * Use: Sets the device's internal card state to enable, disable, or halt
1252 * When in the 'enable' state the card operates as normal.
1253 * When in the 'disable' state, the card enters into a low power mode.
1254 * When in the 'halt' state, the card is shut down and must be fully
1255 * restarted to come back on.
1257 static int iwl3945_send_card_state(struct iwl3945_priv *priv, u32 flags, u8 meta_flag)
1259 struct iwl3945_host_cmd cmd = {
1260 .id = REPLY_CARD_STATE_CMD,
1263 .meta.flags = meta_flag,
1266 if (meta_flag & CMD_ASYNC)
1267 cmd.meta.u.callback = iwl3945_card_state_sync_callback;
1269 return iwl3945_send_cmd(priv, &cmd);
1272 static int iwl3945_add_sta_sync_callback(struct iwl3945_priv *priv,
1273 struct iwl3945_cmd *cmd, struct sk_buff *skb)
1275 struct iwl3945_rx_packet *res = NULL;
1278 IWL_ERROR("Error: Response NULL in REPLY_ADD_STA.\n");
1282 res = (struct iwl3945_rx_packet *)skb->data;
1283 if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
1284 IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n",
1289 switch (res->u.add_sta.status) {
1290 case ADD_STA_SUCCESS_MSK:
1296 /* We didn't cache the SKB; let the caller free it */
1300 int iwl3945_send_add_station(struct iwl3945_priv *priv,
1301 struct iwl3945_addsta_cmd *sta, u8 flags)
1303 struct iwl3945_rx_packet *res = NULL;
1305 struct iwl3945_host_cmd cmd = {
1306 .id = REPLY_ADD_STA,
1307 .len = sizeof(struct iwl3945_addsta_cmd),
1308 .meta.flags = flags,
1312 if (flags & CMD_ASYNC)
1313 cmd.meta.u.callback = iwl3945_add_sta_sync_callback;
1315 cmd.meta.flags |= CMD_WANT_SKB;
1317 rc = iwl3945_send_cmd(priv, &cmd);
1319 if (rc || (flags & CMD_ASYNC))
1322 res = (struct iwl3945_rx_packet *)cmd.meta.u.skb->data;
1323 if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
1324 IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n",
1330 switch (res->u.add_sta.status) {
1331 case ADD_STA_SUCCESS_MSK:
1332 IWL_DEBUG_INFO("REPLY_ADD_STA PASSED\n");
1336 IWL_WARNING("REPLY_ADD_STA failed\n");
1341 priv->alloc_rxb_skb--;
1342 dev_kfree_skb_any(cmd.meta.u.skb);
1347 static int iwl3945_update_sta_key_info(struct iwl3945_priv *priv,
1348 struct ieee80211_key_conf *keyconf,
1351 unsigned long flags;
1352 __le16 key_flags = 0;
1354 switch (keyconf->alg) {
1356 key_flags |= STA_KEY_FLG_CCMP;
1357 key_flags |= cpu_to_le16(
1358 keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
1359 key_flags &= ~STA_KEY_FLG_INVALID;
1366 spin_lock_irqsave(&priv->sta_lock, flags);
1367 priv->stations[sta_id].keyinfo.alg = keyconf->alg;
1368 priv->stations[sta_id].keyinfo.keylen = keyconf->keylen;
1369 memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key,
1372 memcpy(priv->stations[sta_id].sta.key.key, keyconf->key,
1374 priv->stations[sta_id].sta.key.key_flags = key_flags;
1375 priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
1376 priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
1378 spin_unlock_irqrestore(&priv->sta_lock, flags);
1380 IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n");
1381 iwl3945_send_add_station(priv, &priv->stations[sta_id].sta, 0);
1385 static int iwl3945_clear_sta_key_info(struct iwl3945_priv *priv, u8 sta_id)
1387 unsigned long flags;
1389 spin_lock_irqsave(&priv->sta_lock, flags);
1390 memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl3945_hw_key));
1391 memset(&priv->stations[sta_id].sta.key, 0, sizeof(struct iwl3945_keyinfo));
1392 priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
1393 priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
1394 priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
1395 spin_unlock_irqrestore(&priv->sta_lock, flags);
1397 IWL_DEBUG_INFO("hwcrypto: clear ucode station key info\n");
1398 iwl3945_send_add_station(priv, &priv->stations[sta_id].sta, 0);
1402 static void iwl3945_clear_free_frames(struct iwl3945_priv *priv)
1404 struct list_head *element;
1406 IWL_DEBUG_INFO("%d frames on pre-allocated heap on clear.\n",
1407 priv->frames_count);
1409 while (!list_empty(&priv->free_frames)) {
1410 element = priv->free_frames.next;
1412 kfree(list_entry(element, struct iwl3945_frame, list));
1413 priv->frames_count--;
1416 if (priv->frames_count) {
1417 IWL_WARNING("%d frames still in use. Did we lose one?\n",
1418 priv->frames_count);
1419 priv->frames_count = 0;
1423 static struct iwl3945_frame *iwl3945_get_free_frame(struct iwl3945_priv *priv)
1425 struct iwl3945_frame *frame;
1426 struct list_head *element;
1427 if (list_empty(&priv->free_frames)) {
1428 frame = kzalloc(sizeof(*frame), GFP_KERNEL);
1430 IWL_ERROR("Could not allocate frame!\n");
1434 priv->frames_count++;
1438 element = priv->free_frames.next;
1440 return list_entry(element, struct iwl3945_frame, list);
1443 static void iwl3945_free_frame(struct iwl3945_priv *priv, struct iwl3945_frame *frame)
1445 memset(frame, 0, sizeof(*frame));
1446 list_add(&frame->list, &priv->free_frames);
1449 unsigned int iwl3945_fill_beacon_frame(struct iwl3945_priv *priv,
1450 struct ieee80211_hdr *hdr,
1451 const u8 *dest, int left)
1454 if (!iwl3945_is_associated(priv) || !priv->ibss_beacon ||
1455 ((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) &&
1456 (priv->iw_mode != IEEE80211_IF_TYPE_AP)))
1459 if (priv->ibss_beacon->len > left)
1462 memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len);
1464 return priv->ibss_beacon->len;
1467 static u8 iwl3945_rate_get_lowest_plcp(int rate_mask)
1471 for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID;
1472 i = iwl3945_rates[i].next_ieee) {
1473 if (rate_mask & (1 << i))
1474 return iwl3945_rates[i].plcp;
1477 return IWL_RATE_INVALID;
1480 static int iwl3945_send_beacon_cmd(struct iwl3945_priv *priv)
1482 struct iwl3945_frame *frame;
1483 unsigned int frame_size;
1487 frame = iwl3945_get_free_frame(priv);
1490 IWL_ERROR("Could not obtain free frame buffer for beacon "
1495 if (!(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)) {
1496 rate = iwl3945_rate_get_lowest_plcp(priv->active_rate_basic &
1498 if (rate == IWL_INVALID_RATE)
1499 rate = IWL_RATE_6M_PLCP;
1501 rate = iwl3945_rate_get_lowest_plcp(priv->active_rate_basic & 0xF);
1502 if (rate == IWL_INVALID_RATE)
1503 rate = IWL_RATE_1M_PLCP;
1506 frame_size = iwl3945_hw_get_beacon_cmd(priv, frame, rate);
1508 rc = iwl3945_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
1511 iwl3945_free_frame(priv, frame);
1516 /******************************************************************************
1518 * EEPROM related functions
1520 ******************************************************************************/
1522 static void get_eeprom_mac(struct iwl3945_priv *priv, u8 *mac)
1524 memcpy(mac, priv->eeprom.mac_address, 6);
1528 * Clear the OWNER_MSK, to establish driver (instead of uCode running on
1529 * embedded controller) as EEPROM reader; each read is a series of pulses
1530 * to/from the EEPROM chip, not a single event, so even reads could conflict
1531 * if they weren't arbitrated by some ownership mechanism. Here, the driver
1532 * simply claims ownership, which should be safe when this function is called
1533 * (i.e. before loading uCode!).
1535 static inline int iwl3945_eeprom_acquire_semaphore(struct iwl3945_priv *priv)
1537 _iwl3945_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
1542 * iwl3945_eeprom_init - read EEPROM contents
1544 * Load the EEPROM contents from adapter into priv->eeprom
1546 * NOTE: This routine uses the non-debug IO access functions.
1548 int iwl3945_eeprom_init(struct iwl3945_priv *priv)
1550 u16 *e = (u16 *)&priv->eeprom;
1551 u32 gp = iwl3945_read32(priv, CSR_EEPROM_GP);
1553 int sz = sizeof(priv->eeprom);
1558 /* The EEPROM structure has several padding buffers within it
1559 * and when adding new EEPROM maps is subject to programmer errors
1560 * which may be very difficult to identify without explicitly
1561 * checking the resulting size of the eeprom map. */
1562 BUILD_BUG_ON(sizeof(priv->eeprom) != IWL_EEPROM_IMAGE_SIZE);
1564 if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
1565 IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
1569 /* Make sure driver (instead of uCode) is allowed to read EEPROM */
1570 rc = iwl3945_eeprom_acquire_semaphore(priv);
1572 IWL_ERROR("Failed to acquire EEPROM semaphore.\n");
1576 /* eeprom is an array of 16bit values */
1577 for (addr = 0; addr < sz; addr += sizeof(u16)) {
1578 _iwl3945_write32(priv, CSR_EEPROM_REG, addr << 1);
1579 _iwl3945_clear_bit(priv, CSR_EEPROM_REG, CSR_EEPROM_REG_BIT_CMD);
1581 for (i = 0; i < IWL_EEPROM_ACCESS_TIMEOUT;
1582 i += IWL_EEPROM_ACCESS_DELAY) {
1583 r = _iwl3945_read_direct32(priv, CSR_EEPROM_REG);
1584 if (r & CSR_EEPROM_REG_READ_VALID_MSK)
1586 udelay(IWL_EEPROM_ACCESS_DELAY);
1589 if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
1590 IWL_ERROR("Time out reading EEPROM[%d]", addr);
1593 e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
1599 static void iwl3945_unset_hw_setting(struct iwl3945_priv *priv)
1601 if (priv->hw_setting.shared_virt)
1602 pci_free_consistent(priv->pci_dev,
1603 sizeof(struct iwl3945_shared),
1604 priv->hw_setting.shared_virt,
1605 priv->hw_setting.shared_phys);
1609 * iwl3945_supported_rate_to_ie - fill in the supported rate in IE field
1611 * return : set the bit for each supported rate insert in ie
1613 static u16 iwl3945_supported_rate_to_ie(u8 *ie, u16 supported_rate,
1614 u16 basic_rate, int *left)
1616 u16 ret_rates = 0, bit;
1621 for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
1622 if (bit & supported_rate) {
1624 rates[*cnt] = iwl3945_rates[i].ieee |
1625 ((bit & basic_rate) ? 0x80 : 0x00);
1629 (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
1638 * iwl3945_fill_probe_req - fill in all required fields and IE for probe request
1640 static u16 iwl3945_fill_probe_req(struct iwl3945_priv *priv,
1641 struct ieee80211_mgmt *frame,
1642 int left, int is_direct)
1646 u16 active_rates, ret_rates, cck_rates;
1648 /* Make sure there is enough space for the probe request,
1649 * two mandatory IEs and the data */
1655 frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
1656 memcpy(frame->da, iwl3945_broadcast_addr, ETH_ALEN);
1657 memcpy(frame->sa, priv->mac_addr, ETH_ALEN);
1658 memcpy(frame->bssid, iwl3945_broadcast_addr, ETH_ALEN);
1659 frame->seq_ctrl = 0;
1661 /* fill in our indirect SSID IE */
1668 pos = &(frame->u.probe_req.variable[0]);
1669 *pos++ = WLAN_EID_SSID;
1672 /* fill in our direct SSID IE... */
1675 left -= 2 + priv->essid_len;
1678 /* ... fill it in... */
1679 *pos++ = WLAN_EID_SSID;
1680 *pos++ = priv->essid_len;
1681 memcpy(pos, priv->essid, priv->essid_len);
1682 pos += priv->essid_len;
1683 len += 2 + priv->essid_len;
1686 /* fill in supported rate */
1692 /* ... fill it in... */
1693 *pos++ = WLAN_EID_SUPP_RATES;
1696 priv->active_rate = priv->rates_mask;
1697 active_rates = priv->active_rate;
1698 priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
1700 cck_rates = IWL_CCK_RATES_MASK & active_rates;
1701 ret_rates = iwl3945_supported_rate_to_ie(pos, cck_rates,
1702 priv->active_rate_basic, &left);
1703 active_rates &= ~ret_rates;
1705 ret_rates = iwl3945_supported_rate_to_ie(pos, active_rates,
1706 priv->active_rate_basic, &left);
1707 active_rates &= ~ret_rates;
1711 if (active_rates == 0)
1714 /* fill in supported extended rate */
1719 /* ... fill it in... */
1720 *pos++ = WLAN_EID_EXT_SUPP_RATES;
1722 iwl3945_supported_rate_to_ie(pos, active_rates,
1723 priv->active_rate_basic, &left);
1734 static int iwl3945_send_qos_params_command(struct iwl3945_priv *priv,
1735 struct iwl3945_qosparam_cmd *qos)
1738 return iwl3945_send_cmd_pdu(priv, REPLY_QOS_PARAM,
1739 sizeof(struct iwl3945_qosparam_cmd), qos);
1742 static void iwl3945_reset_qos(struct iwl3945_priv *priv)
1748 unsigned long flags;
1751 spin_lock_irqsave(&priv->lock, flags);
1752 priv->qos_data.qos_active = 0;
1754 if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) {
1755 if (priv->qos_data.qos_enable)
1756 priv->qos_data.qos_active = 1;
1757 if (!(priv->active_rate & 0xfff0)) {
1761 } else if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
1762 if (priv->qos_data.qos_enable)
1763 priv->qos_data.qos_active = 1;
1764 } else if (!(priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK)) {
1769 if (priv->qos_data.qos_active)
1772 priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min);
1773 priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max);
1774 priv->qos_data.def_qos_parm.ac[0].aifsn = aifs;
1775 priv->qos_data.def_qos_parm.ac[0].edca_txop = 0;
1776 priv->qos_data.def_qos_parm.ac[0].reserved1 = 0;
1778 if (priv->qos_data.qos_active) {
1780 priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min);
1781 priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max);
1782 priv->qos_data.def_qos_parm.ac[i].aifsn = 7;
1783 priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
1784 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
1787 priv->qos_data.def_qos_parm.ac[i].cw_min =
1788 cpu_to_le16((cw_min + 1) / 2 - 1);
1789 priv->qos_data.def_qos_parm.ac[i].cw_max =
1790 cpu_to_le16(cw_max);
1791 priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
1793 priv->qos_data.def_qos_parm.ac[i].edca_txop =
1796 priv->qos_data.def_qos_parm.ac[i].edca_txop =
1798 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
1801 priv->qos_data.def_qos_parm.ac[i].cw_min =
1802 cpu_to_le16((cw_min + 1) / 4 - 1);
1803 priv->qos_data.def_qos_parm.ac[i].cw_max =
1804 cpu_to_le16((cw_max + 1) / 2 - 1);
1805 priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
1806 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
1808 priv->qos_data.def_qos_parm.ac[i].edca_txop =
1811 priv->qos_data.def_qos_parm.ac[i].edca_txop =
1814 for (i = 1; i < 4; i++) {
1815 priv->qos_data.def_qos_parm.ac[i].cw_min =
1816 cpu_to_le16(cw_min);
1817 priv->qos_data.def_qos_parm.ac[i].cw_max =
1818 cpu_to_le16(cw_max);
1819 priv->qos_data.def_qos_parm.ac[i].aifsn = aifs;
1820 priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
1821 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
1824 IWL_DEBUG_QOS("set QoS to default \n");
1826 spin_unlock_irqrestore(&priv->lock, flags);
1829 static void iwl3945_activate_qos(struct iwl3945_priv *priv, u8 force)
1831 unsigned long flags;
1833 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
1836 if (!priv->qos_data.qos_enable)
1839 spin_lock_irqsave(&priv->lock, flags);
1840 priv->qos_data.def_qos_parm.qos_flags = 0;
1842 if (priv->qos_data.qos_cap.q_AP.queue_request &&
1843 !priv->qos_data.qos_cap.q_AP.txop_request)
1844 priv->qos_data.def_qos_parm.qos_flags |=
1845 QOS_PARAM_FLG_TXOP_TYPE_MSK;
1847 if (priv->qos_data.qos_active)
1848 priv->qos_data.def_qos_parm.qos_flags |=
1849 QOS_PARAM_FLG_UPDATE_EDCA_MSK;
1851 spin_unlock_irqrestore(&priv->lock, flags);
1853 if (force || iwl3945_is_associated(priv)) {
1854 IWL_DEBUG_QOS("send QoS cmd with Qos active %d \n",
1855 priv->qos_data.qos_active);
1857 iwl3945_send_qos_params_command(priv,
1858 &(priv->qos_data.def_qos_parm));
1863 * Power management (not Tx power!) functions
1865 #define MSEC_TO_USEC 1024
1867 #define NOSLP __constant_cpu_to_le32(0)
1868 #define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK
1869 #define SLP_TIMEOUT(T) __constant_cpu_to_le32((T) * MSEC_TO_USEC)
1870 #define SLP_VEC(X0, X1, X2, X3, X4) {__constant_cpu_to_le32(X0), \
1871 __constant_cpu_to_le32(X1), \
1872 __constant_cpu_to_le32(X2), \
1873 __constant_cpu_to_le32(X3), \
1874 __constant_cpu_to_le32(X4)}
1877 /* default power management (not Tx power) table values */
1879 static struct iwl3945_power_vec_entry range_0[IWL_POWER_AC] = {
1880 {{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
1881 {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
1882 {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(300), SLP_VEC(2, 4, 6, 7, 7)}, 0},
1883 {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(100), SLP_VEC(2, 6, 9, 9, 10)}, 0},
1884 {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 10)}, 1},
1885 {{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25), SLP_VEC(4, 7, 10, 10, 10)}, 1}
1889 static struct iwl3945_power_vec_entry range_1[IWL_POWER_AC] = {
1890 {{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
1891 {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500),
1892 SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
1893 {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(300),
1894 SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
1895 {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(100),
1896 SLP_VEC(2, 6, 9, 9, 0xFF)}, 0},
1897 {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
1898 {{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25),
1899 SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
1902 int iwl3945_power_init_handle(struct iwl3945_priv *priv)
1905 struct iwl3945_power_mgr *pow_data;
1906 int size = sizeof(struct iwl3945_power_vec_entry) * IWL_POWER_AC;
1909 IWL_DEBUG_POWER("Initialize power \n");
1911 pow_data = &(priv->power_data);
1913 memset(pow_data, 0, sizeof(*pow_data));
1915 pow_data->active_index = IWL_POWER_RANGE_0;
1916 pow_data->dtim_val = 0xffff;
1918 memcpy(&pow_data->pwr_range_0[0], &range_0[0], size);
1919 memcpy(&pow_data->pwr_range_1[0], &range_1[0], size);
1921 rc = pci_read_config_word(priv->pci_dev, PCI_LINK_CTRL, &pci_pm);
1925 struct iwl3945_powertable_cmd *cmd;
1927 IWL_DEBUG_POWER("adjust power command flags\n");
1929 for (i = 0; i < IWL_POWER_AC; i++) {
1930 cmd = &pow_data->pwr_range_0[i].cmd;
1933 cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
1935 cmd->flags |= IWL_POWER_PCI_PM_MSK;
1941 static int iwl3945_update_power_cmd(struct iwl3945_priv *priv,
1942 struct iwl3945_powertable_cmd *cmd, u32 mode)
1947 struct iwl3945_power_vec_entry *range;
1949 struct iwl3945_power_mgr *pow_data;
1951 if (mode > IWL_POWER_INDEX_5) {
1952 IWL_DEBUG_POWER("Error invalid power mode \n");
1955 pow_data = &(priv->power_data);
1957 if (pow_data->active_index == IWL_POWER_RANGE_0)
1958 range = &pow_data->pwr_range_0[0];
1960 range = &pow_data->pwr_range_1[1];
1962 memcpy(cmd, &range[mode].cmd, sizeof(struct iwl3945_powertable_cmd));
1964 #ifdef IWL_MAC80211_DISABLE
1965 if (priv->assoc_network != NULL) {
1966 unsigned long flags;
1968 period = priv->assoc_network->tim.tim_period;
1970 #endif /*IWL_MAC80211_DISABLE */
1971 skip = range[mode].no_dtim;
1980 cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
1982 __le32 slp_itrvl = cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1];
1983 max_sleep = (le32_to_cpu(slp_itrvl) / period) * period;
1984 cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
1987 for (i = 0; i < IWL_POWER_VEC_SIZE; i++) {
1988 if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep)
1989 cmd->sleep_interval[i] = cpu_to_le32(max_sleep);
1992 IWL_DEBUG_POWER("Flags value = 0x%08X\n", cmd->flags);
1993 IWL_DEBUG_POWER("Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
1994 IWL_DEBUG_POWER("Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
1995 IWL_DEBUG_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n",
1996 le32_to_cpu(cmd->sleep_interval[0]),
1997 le32_to_cpu(cmd->sleep_interval[1]),
1998 le32_to_cpu(cmd->sleep_interval[2]),
1999 le32_to_cpu(cmd->sleep_interval[3]),
2000 le32_to_cpu(cmd->sleep_interval[4]));
2005 static int iwl3945_send_power_mode(struct iwl3945_priv *priv, u32 mode)
2007 u32 uninitialized_var(final_mode);
2009 struct iwl3945_powertable_cmd cmd;
2011 /* If on battery, set to 3,
2012 * if plugged into AC power, set to CAM ("continuously aware mode"),
2013 * else user level */
2015 case IWL_POWER_BATTERY:
2016 final_mode = IWL_POWER_INDEX_3;
2019 final_mode = IWL_POWER_MODE_CAM;
2026 iwl3945_update_power_cmd(priv, &cmd, final_mode);
2028 rc = iwl3945_send_cmd_pdu(priv, POWER_TABLE_CMD, sizeof(cmd), &cmd);
2030 if (final_mode == IWL_POWER_MODE_CAM)
2031 clear_bit(STATUS_POWER_PMI, &priv->status);
2033 set_bit(STATUS_POWER_PMI, &priv->status);
2038 int iwl3945_is_network_packet(struct iwl3945_priv *priv, struct ieee80211_hdr *header)
2040 /* Filter incoming packets to determine if they are targeted toward
2041 * this network, discarding packets coming from ourselves */
2042 switch (priv->iw_mode) {
2043 case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */
2044 /* packets from our adapter are dropped (echo) */
2045 if (!compare_ether_addr(header->addr2, priv->mac_addr))
2047 /* {broad,multi}cast packets to our IBSS go through */
2048 if (is_multicast_ether_addr(header->addr1))
2049 return !compare_ether_addr(header->addr3, priv->bssid);
2050 /* packets to our adapter go through */
2051 return !compare_ether_addr(header->addr1, priv->mac_addr);
2052 case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */
2053 /* packets from our adapter are dropped (echo) */
2054 if (!compare_ether_addr(header->addr3, priv->mac_addr))
2056 /* {broad,multi}cast packets to our BSS go through */
2057 if (is_multicast_ether_addr(header->addr1))
2058 return !compare_ether_addr(header->addr2, priv->bssid);
2059 /* packets to our adapter go through */
2060 return !compare_ether_addr(header->addr1, priv->mac_addr);
2069 * iwl3945_scan_cancel - Cancel any currently executing HW scan
2071 * NOTE: priv->mutex is not required before calling this function
2073 static int iwl3945_scan_cancel(struct iwl3945_priv *priv)
2075 if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
2076 clear_bit(STATUS_SCANNING, &priv->status);
2080 if (test_bit(STATUS_SCANNING, &priv->status)) {
2081 if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
2082 IWL_DEBUG_SCAN("Queuing scan abort.\n");
2083 set_bit(STATUS_SCAN_ABORTING, &priv->status);
2084 queue_work(priv->workqueue, &priv->abort_scan);
2087 IWL_DEBUG_SCAN("Scan abort already in progress.\n");
2089 return test_bit(STATUS_SCANNING, &priv->status);
2096 * iwl3945_scan_cancel_timeout - Cancel any currently executing HW scan
2097 * @ms: amount of time to wait (in milliseconds) for scan to abort
2099 * NOTE: priv->mutex must be held before calling this function
2101 static int iwl3945_scan_cancel_timeout(struct iwl3945_priv *priv, unsigned long ms)
2103 unsigned long now = jiffies;
2106 ret = iwl3945_scan_cancel(priv);
2108 mutex_unlock(&priv->mutex);
2109 while (!time_after(jiffies, now + msecs_to_jiffies(ms)) &&
2110 test_bit(STATUS_SCANNING, &priv->status))
2112 mutex_lock(&priv->mutex);
2114 return test_bit(STATUS_SCANNING, &priv->status);
2120 static void iwl3945_sequence_reset(struct iwl3945_priv *priv)
2122 /* Reset ieee stats */
2124 /* We don't reset the net_device_stats (ieee->stats) on
2127 priv->last_seq_num = -1;
2128 priv->last_frag_num = -1;
2129 priv->last_packet_time = 0;
2131 iwl3945_scan_cancel(priv);
2134 #define MAX_UCODE_BEACON_INTERVAL 1024
2135 #define INTEL_CONN_LISTEN_INTERVAL __constant_cpu_to_le16(0xA)
2137 static __le16 iwl3945_adjust_beacon_interval(u16 beacon_val)
2140 u16 beacon_factor = 0;
2143 (beacon_val + MAX_UCODE_BEACON_INTERVAL)
2144 / MAX_UCODE_BEACON_INTERVAL;
2145 new_val = beacon_val / beacon_factor;
2147 return cpu_to_le16(new_val);
2150 static void iwl3945_setup_rxon_timing(struct iwl3945_priv *priv)
2152 u64 interval_tm_unit;
2154 unsigned long flags;
2155 struct ieee80211_conf *conf = NULL;
2158 conf = ieee80211_get_hw_conf(priv->hw);
2160 spin_lock_irqsave(&priv->lock, flags);
2161 priv->rxon_timing.timestamp.dw[1] = cpu_to_le32(priv->timestamp1);
2162 priv->rxon_timing.timestamp.dw[0] = cpu_to_le32(priv->timestamp0);
2164 priv->rxon_timing.listen_interval = INTEL_CONN_LISTEN_INTERVAL;
2166 tsf = priv->timestamp1;
2167 tsf = ((tsf << 32) | priv->timestamp0);
2169 beacon_int = priv->beacon_int;
2170 spin_unlock_irqrestore(&priv->lock, flags);
2172 if (priv->iw_mode == IEEE80211_IF_TYPE_STA) {
2173 if (beacon_int == 0) {
2174 priv->rxon_timing.beacon_interval = cpu_to_le16(100);
2175 priv->rxon_timing.beacon_init_val = cpu_to_le32(102400);
2177 priv->rxon_timing.beacon_interval =
2178 cpu_to_le16(beacon_int);
2179 priv->rxon_timing.beacon_interval =
2180 iwl3945_adjust_beacon_interval(
2181 le16_to_cpu(priv->rxon_timing.beacon_interval));
2184 priv->rxon_timing.atim_window = 0;
2186 priv->rxon_timing.beacon_interval =
2187 iwl3945_adjust_beacon_interval(conf->beacon_int);
2188 /* TODO: we need to get atim_window from upper stack
2189 * for now we set to 0 */
2190 priv->rxon_timing.atim_window = 0;
2194 (le16_to_cpu(priv->rxon_timing.beacon_interval) * 1024);
2195 result = do_div(tsf, interval_tm_unit);
2196 priv->rxon_timing.beacon_init_val =
2197 cpu_to_le32((u32) ((u64) interval_tm_unit - result));
2200 ("beacon interval %d beacon timer %d beacon tim %d\n",
2201 le16_to_cpu(priv->rxon_timing.beacon_interval),
2202 le32_to_cpu(priv->rxon_timing.beacon_init_val),
2203 le16_to_cpu(priv->rxon_timing.atim_window));
2206 static int iwl3945_scan_initiate(struct iwl3945_priv *priv)
2208 if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
2209 IWL_ERROR("APs don't scan.\n");
2213 if (!iwl3945_is_ready_rf(priv)) {
2214 IWL_DEBUG_SCAN("Aborting scan due to not ready.\n");
2218 if (test_bit(STATUS_SCANNING, &priv->status)) {
2219 IWL_DEBUG_SCAN("Scan already in progress.\n");
2223 if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
2224 IWL_DEBUG_SCAN("Scan request while abort pending. "
2229 IWL_DEBUG_INFO("Starting scan...\n");
2230 priv->scan_bands = 2;
2231 set_bit(STATUS_SCANNING, &priv->status);
2232 priv->scan_start = jiffies;
2233 priv->scan_pass_start = priv->scan_start;
2235 queue_work(priv->workqueue, &priv->request_scan);
2240 static int iwl3945_set_rxon_hwcrypto(struct iwl3945_priv *priv, int hw_decrypt)
2242 struct iwl3945_rxon_cmd *rxon = &priv->staging_rxon;
2245 rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK;
2247 rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
2252 static void iwl3945_set_flags_for_phymode(struct iwl3945_priv *priv,
2253 enum ieee80211_band band)
2255 if (band == IEEE80211_BAND_5GHZ) {
2256 priv->staging_rxon.flags &=
2257 ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK
2258 | RXON_FLG_CCK_MSK);
2259 priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
2261 /* Copied from iwl3945_bg_post_associate() */
2262 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
2263 priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
2265 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2267 if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
2268 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2270 priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
2271 priv->staging_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK;
2272 priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK;
2277 * initialize rxon structure with default values from eeprom
2279 static void iwl3945_connection_init_rx_config(struct iwl3945_priv *priv)
2281 const struct iwl3945_channel_info *ch_info;
2283 memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon));
2285 switch (priv->iw_mode) {
2286 case IEEE80211_IF_TYPE_AP:
2287 priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP;
2290 case IEEE80211_IF_TYPE_STA:
2291 priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS;
2292 priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK;
2295 case IEEE80211_IF_TYPE_IBSS:
2296 priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS;
2297 priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK;
2298 priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK |
2299 RXON_FILTER_ACCEPT_GRP_MSK;
2302 case IEEE80211_IF_TYPE_MNTR:
2303 priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER;
2304 priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK |
2305 RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK;
2308 IWL_ERROR("Unsupported interface type %d\n", priv->iw_mode);
2313 /* TODO: Figure out when short_preamble would be set and cache from
2315 if (!hw_to_local(priv->hw)->short_preamble)
2316 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2318 priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2321 ch_info = iwl3945_get_channel_info(priv, priv->band,
2322 le16_to_cpu(priv->staging_rxon.channel));
2325 ch_info = &priv->channel_info[0];
2328 * in some case A channels are all non IBSS
2329 * in this case force B/G channel
2331 if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
2332 !(is_channel_ibss(ch_info)))
2333 ch_info = &priv->channel_info[0];
2335 priv->staging_rxon.channel = cpu_to_le16(ch_info->channel);
2336 if (is_channel_a_band(ch_info))
2337 priv->band = IEEE80211_BAND_5GHZ;
2339 priv->band = IEEE80211_BAND_2GHZ;
2341 iwl3945_set_flags_for_phymode(priv, priv->band);
2343 priv->staging_rxon.ofdm_basic_rates =
2344 (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
2345 priv->staging_rxon.cck_basic_rates =
2346 (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
2349 static int iwl3945_set_mode(struct iwl3945_priv *priv, int mode)
2351 if (mode == IEEE80211_IF_TYPE_IBSS) {
2352 const struct iwl3945_channel_info *ch_info;
2354 ch_info = iwl3945_get_channel_info(priv,
2356 le16_to_cpu(priv->staging_rxon.channel));
2358 if (!ch_info || !is_channel_ibss(ch_info)) {
2359 IWL_ERROR("channel %d not IBSS channel\n",
2360 le16_to_cpu(priv->staging_rxon.channel));
2365 priv->iw_mode = mode;
2367 iwl3945_connection_init_rx_config(priv);
2368 memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
2370 iwl3945_clear_stations_table(priv);
2372 /* dont commit rxon if rf-kill is on*/
2373 if (!iwl3945_is_ready_rf(priv))
2376 cancel_delayed_work(&priv->scan_check);
2377 if (iwl3945_scan_cancel_timeout(priv, 100)) {
2378 IWL_WARNING("Aborted scan still in progress after 100ms\n");
2379 IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
2383 iwl3945_commit_rxon(priv);
2388 static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv,
2389 struct ieee80211_tx_control *ctl,
2390 struct iwl3945_cmd *cmd,
2391 struct sk_buff *skb_frag,
2394 struct iwl3945_hw_key *keyinfo = &priv->stations[ctl->key_idx].keyinfo;
2396 switch (keyinfo->alg) {
2398 cmd->cmd.tx.sec_ctl = TX_CMD_SEC_CCM;
2399 memcpy(cmd->cmd.tx.key, keyinfo->key, keyinfo->keylen);
2400 IWL_DEBUG_TX("tx_cmd with aes hwcrypto\n");
2405 cmd->cmd.tx.sec_ctl = TX_CMD_SEC_TKIP;
2408 memcpy(cmd->cmd.tx.tkip_mic.byte, skb_frag->tail - 8,
2411 memset(cmd->cmd.tx.tkip_mic.byte, 0, 8);
2416 cmd->cmd.tx.sec_ctl = TX_CMD_SEC_WEP |
2417 (ctl->key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
2419 if (keyinfo->keylen == 13)
2420 cmd->cmd.tx.sec_ctl |= TX_CMD_SEC_KEY128;
2422 memcpy(&cmd->cmd.tx.key[3], keyinfo->key, keyinfo->keylen);
2424 IWL_DEBUG_TX("Configuring packet for WEP encryption "
2425 "with key %d\n", ctl->key_idx);
2429 printk(KERN_ERR "Unknown encode alg %d\n", keyinfo->alg);
2435 * handle build REPLY_TX command notification.
2437 static void iwl3945_build_tx_cmd_basic(struct iwl3945_priv *priv,
2438 struct iwl3945_cmd *cmd,
2439 struct ieee80211_tx_control *ctrl,
2440 struct ieee80211_hdr *hdr,
2441 int is_unicast, u8 std_id)
2444 u16 fc = le16_to_cpu(hdr->frame_control);
2445 __le32 tx_flags = cmd->cmd.tx.tx_flags;
2447 cmd->cmd.tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2448 if (!(ctrl->flags & IEEE80211_TXCTL_NO_ACK)) {
2449 tx_flags |= TX_CMD_FLG_ACK_MSK;
2450 if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)
2451 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
2452 if (ieee80211_is_probe_response(fc) &&
2453 !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
2454 tx_flags |= TX_CMD_FLG_TSF_MSK;
2456 tx_flags &= (~TX_CMD_FLG_ACK_MSK);
2457 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
2460 cmd->cmd.tx.sta_id = std_id;
2461 if (ieee80211_get_morefrag(hdr))
2462 tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
2464 qc = ieee80211_get_qos_ctrl(hdr);
2466 cmd->cmd.tx.tid_tspec = (u8) (le16_to_cpu(*qc) & 0xf);
2467 tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
2469 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
2471 if (ctrl->flags & IEEE80211_TXCTL_USE_RTS_CTS) {
2472 tx_flags |= TX_CMD_FLG_RTS_MSK;
2473 tx_flags &= ~TX_CMD_FLG_CTS_MSK;
2474 } else if (ctrl->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) {
2475 tx_flags &= ~TX_CMD_FLG_RTS_MSK;
2476 tx_flags |= TX_CMD_FLG_CTS_MSK;
2479 if ((tx_flags & TX_CMD_FLG_RTS_MSK) || (tx_flags & TX_CMD_FLG_CTS_MSK))
2480 tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
2482 tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
2483 if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) {
2484 if ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_ASSOC_REQ ||
2485 (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_REASSOC_REQ)
2486 cmd->cmd.tx.timeout.pm_frame_timeout = cpu_to_le16(3);
2488 cmd->cmd.tx.timeout.pm_frame_timeout = cpu_to_le16(2);
2490 cmd->cmd.tx.timeout.pm_frame_timeout = 0;
2491 #ifdef CONFIG_IWL3945_LEDS
2492 priv->rxtxpackets += le16_to_cpu(cmd->cmd.tx.len);
2496 cmd->cmd.tx.driver_txop = 0;
2497 cmd->cmd.tx.tx_flags = tx_flags;
2498 cmd->cmd.tx.next_frame_len = 0;
2502 * iwl3945_get_sta_id - Find station's index within station table
2504 static int iwl3945_get_sta_id(struct iwl3945_priv *priv, struct ieee80211_hdr *hdr)
2507 u16 fc = le16_to_cpu(hdr->frame_control);
2509 /* If this frame is broadcast or management, use broadcast station id */
2510 if (((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA) ||
2511 is_multicast_ether_addr(hdr->addr1))
2512 return priv->hw_setting.bcast_sta_id;
2514 switch (priv->iw_mode) {
2516 /* If we are a client station in a BSS network, use the special
2517 * AP station entry (that's the only station we communicate with) */
2518 case IEEE80211_IF_TYPE_STA:
2521 /* If we are an AP, then find the station, or use BCAST */
2522 case IEEE80211_IF_TYPE_AP:
2523 sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
2524 if (sta_id != IWL_INVALID_STATION)
2526 return priv->hw_setting.bcast_sta_id;
2528 /* If this frame is going out to an IBSS network, find the station,
2529 * or create a new station table entry */
2530 case IEEE80211_IF_TYPE_IBSS: {
2531 DECLARE_MAC_BUF(mac);
2533 /* Create new station table entry */
2534 sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
2535 if (sta_id != IWL_INVALID_STATION)
2538 sta_id = iwl3945_add_station(priv, hdr->addr1, 0, CMD_ASYNC);
2540 if (sta_id != IWL_INVALID_STATION)
2543 IWL_DEBUG_DROP("Station %s not in station map. "
2544 "Defaulting to broadcast...\n",
2545 print_mac(mac, hdr->addr1));
2546 iwl3945_print_hex_dump(IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr));
2547 return priv->hw_setting.bcast_sta_id;
2550 IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
2551 return priv->hw_setting.bcast_sta_id;
2556 * start REPLY_TX command process
2558 static int iwl3945_tx_skb(struct iwl3945_priv *priv,
2559 struct sk_buff *skb, struct ieee80211_tx_control *ctl)
2561 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
2562 struct iwl3945_tfd_frame *tfd;
2564 int txq_id = ctl->queue;
2565 struct iwl3945_tx_queue *txq = NULL;
2566 struct iwl3945_queue *q = NULL;
2567 dma_addr_t phys_addr;
2568 dma_addr_t txcmd_phys;
2569 struct iwl3945_cmd *out_cmd = NULL;
2570 u16 len, idx, len_org;
2571 u8 id, hdr_len, unicast;
2576 u8 wait_write_ptr = 0;
2577 unsigned long flags;
2580 spin_lock_irqsave(&priv->lock, flags);
2581 if (iwl3945_is_rfkill(priv)) {
2582 IWL_DEBUG_DROP("Dropping - RF KILL\n");
2587 IWL_DEBUG_DROP("Dropping - !priv->vif\n");
2591 if ((ctl->tx_rate->hw_value & 0xFF) == IWL_INVALID_RATE) {
2592 IWL_ERROR("ERROR: No TX rate available.\n");
2596 unicast = !is_multicast_ether_addr(hdr->addr1);
2599 fc = le16_to_cpu(hdr->frame_control);
2601 #ifdef CONFIG_IWL3945_DEBUG
2602 if (ieee80211_is_auth(fc))
2603 IWL_DEBUG_TX("Sending AUTH frame\n");
2604 else if (ieee80211_is_assoc_request(fc))
2605 IWL_DEBUG_TX("Sending ASSOC frame\n");
2606 else if (ieee80211_is_reassoc_request(fc))
2607 IWL_DEBUG_TX("Sending REASSOC frame\n");
2610 /* drop all data frame if we are not associated */
2611 if ((!iwl3945_is_associated(priv) ||
2612 ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id)) &&
2613 ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA)) {
2614 IWL_DEBUG_DROP("Dropping - !iwl3945_is_associated\n");
2618 spin_unlock_irqrestore(&priv->lock, flags);
2620 hdr_len = ieee80211_get_hdrlen(fc);
2622 /* Find (or create) index into station table for destination station */
2623 sta_id = iwl3945_get_sta_id(priv, hdr);
2624 if (sta_id == IWL_INVALID_STATION) {
2625 DECLARE_MAC_BUF(mac);
2627 IWL_DEBUG_DROP("Dropping - INVALID STATION: %s\n",
2628 print_mac(mac, hdr->addr1));
2632 IWL_DEBUG_RATE("station Id %d\n", sta_id);
2634 qc = ieee80211_get_qos_ctrl(hdr);
2636 u8 tid = (u8)(le16_to_cpu(*qc) & 0xf);
2637 seq_number = priv->stations[sta_id].tid[tid].seq_number &
2639 hdr->seq_ctrl = cpu_to_le16(seq_number) |
2641 __constant_cpu_to_le16(IEEE80211_SCTL_FRAG));
2645 /* Descriptor for chosen Tx queue */
2646 txq = &priv->txq[txq_id];
2649 spin_lock_irqsave(&priv->lock, flags);
2651 /* Set up first empty TFD within this queue's circular TFD buffer */
2652 tfd = &txq->bd[q->write_ptr];
2653 memset(tfd, 0, sizeof(*tfd));
2654 control_flags = (u32 *) tfd;
2655 idx = get_cmd_index(q, q->write_ptr, 0);
2657 /* Set up driver data for this TFD */
2658 memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl3945_tx_info));
2659 txq->txb[q->write_ptr].skb[0] = skb;
2660 memcpy(&(txq->txb[q->write_ptr].status.control),
2661 ctl, sizeof(struct ieee80211_tx_control));
2663 /* Init first empty entry in queue's array of Tx/cmd buffers */
2664 out_cmd = &txq->cmd[idx];
2665 memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
2666 memset(&out_cmd->cmd.tx, 0, sizeof(out_cmd->cmd.tx));
2669 * Set up the Tx-command (not MAC!) header.
2670 * Store the chosen Tx queue and TFD index within the sequence field;
2671 * after Tx, uCode's Tx response will return this value so driver can
2672 * locate the frame within the tx queue and do post-tx processing.
2674 out_cmd->hdr.cmd = REPLY_TX;
2675 out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
2676 INDEX_TO_SEQ(q->write_ptr)));
2678 /* Copy MAC header from skb into command buffer */
2679 memcpy(out_cmd->cmd.tx.hdr, hdr, hdr_len);
2682 * Use the first empty entry in this queue's command buffer array
2683 * to contain the Tx command and MAC header concatenated together
2684 * (payload data will be in another buffer).
2685 * Size of this varies, due to varying MAC header length.
2686 * If end is not dword aligned, we'll have 2 extra bytes at the end
2687 * of the MAC header (device reads on dword boundaries).
2688 * We'll tell device about this padding later.
2690 len = priv->hw_setting.tx_cmd_len +
2691 sizeof(struct iwl3945_cmd_header) + hdr_len;
2694 len = (len + 3) & ~3;
2701 /* Physical address of this Tx command's header (not MAC header!),
2702 * within command buffer array. */
2703 txcmd_phys = txq->dma_addr_cmd + sizeof(struct iwl3945_cmd) * idx +
2704 offsetof(struct iwl3945_cmd, hdr);
2706 /* Add buffer containing Tx command and MAC(!) header to TFD's
2708 iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
2710 if (!(ctl->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT))
2711 iwl3945_build_tx_cmd_hwcrypto(priv, ctl, out_cmd, skb, 0);
2713 /* Set up TFD's 2nd entry to point directly to remainder of skb,
2714 * if any (802.11 null frames have no payload). */
2715 len = skb->len - hdr_len;
2717 phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
2718 len, PCI_DMA_TODEVICE);
2719 iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, len);
2723 /* If there is no payload, then we use only one Tx buffer */
2724 *control_flags = TFD_CTL_COUNT_SET(1);
2726 /* Else use 2 buffers.
2727 * Tell 3945 about any padding after MAC header */
2728 *control_flags = TFD_CTL_COUNT_SET(2) |
2729 TFD_CTL_PAD_SET(U32_PAD(len));
2731 /* Total # bytes to be transmitted */
2732 len = (u16)skb->len;
2733 out_cmd->cmd.tx.len = cpu_to_le16(len);
2735 /* TODO need this for burst mode later on */
2736 iwl3945_build_tx_cmd_basic(priv, out_cmd, ctl, hdr, unicast, sta_id);
2738 /* set is_hcca to 0; it probably will never be implemented */
2739 iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, ctl, hdr, sta_id, 0);
2741 out_cmd->cmd.tx.tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
2742 out_cmd->cmd.tx.tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
2744 if (!ieee80211_get_morefrag(hdr)) {
2745 txq->need_update = 1;
2747 u8 tid = (u8)(le16_to_cpu(*qc) & 0xf);
2748 priv->stations[sta_id].tid[tid].seq_number = seq_number;
2752 txq->need_update = 0;
2755 iwl3945_print_hex_dump(IWL_DL_TX, out_cmd->cmd.payload,
2756 sizeof(out_cmd->cmd.tx));
2758 iwl3945_print_hex_dump(IWL_DL_TX, (u8 *)out_cmd->cmd.tx.hdr,
2759 ieee80211_get_hdrlen(fc));
2761 /* Tell device the write index *just past* this latest filled TFD */
2762 q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
2763 rc = iwl3945_tx_queue_update_write_ptr(priv, txq);
2764 spin_unlock_irqrestore(&priv->lock, flags);
2769 if ((iwl3945_queue_space(q) < q->high_mark)
2770 && priv->mac80211_registered) {
2771 if (wait_write_ptr) {
2772 spin_lock_irqsave(&priv->lock, flags);
2773 txq->need_update = 1;
2774 iwl3945_tx_queue_update_write_ptr(priv, txq);
2775 spin_unlock_irqrestore(&priv->lock, flags);
2778 ieee80211_stop_queue(priv->hw, ctl->queue);
2784 spin_unlock_irqrestore(&priv->lock, flags);
2789 static void iwl3945_set_rate(struct iwl3945_priv *priv)
2791 const struct ieee80211_supported_band *sband = NULL;
2792 struct ieee80211_rate *rate;
2795 sband = iwl3945_get_band(priv, priv->band);
2797 IWL_ERROR("Failed to set rate: unable to get hw mode\n");
2801 priv->active_rate = 0;
2802 priv->active_rate_basic = 0;
2804 IWL_DEBUG_RATE("Setting rates for %s GHz\n",
2805 sband->band == IEEE80211_BAND_2GHZ ? "2.4" : "5");
2807 for (i = 0; i < sband->n_bitrates; i++) {
2808 rate = &sband->bitrates[i];
2809 if ((rate->hw_value < IWL_RATE_COUNT) &&
2810 !(rate->flags & IEEE80211_CHAN_DISABLED)) {
2811 IWL_DEBUG_RATE("Adding rate index %d (plcp %d)\n",
2812 rate->hw_value, iwl3945_rates[rate->hw_value].plcp);
2813 priv->active_rate |= (1 << rate->hw_value);
2817 IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n",
2818 priv->active_rate, priv->active_rate_basic);
2821 * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK)
2822 * otherwise set it to the default of all CCK rates and 6, 12, 24 for
2825 if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK)
2826 priv->staging_rxon.cck_basic_rates =
2827 ((priv->active_rate_basic &
2828 IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF;
2830 priv->staging_rxon.cck_basic_rates =
2831 (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
2833 if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK)
2834 priv->staging_rxon.ofdm_basic_rates =
2835 ((priv->active_rate_basic &
2836 (IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >>
2837 IWL_FIRST_OFDM_RATE) & 0xFF;
2839 priv->staging_rxon.ofdm_basic_rates =
2840 (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
2843 static void iwl3945_radio_kill_sw(struct iwl3945_priv *priv, int disable_radio)
2845 unsigned long flags;
2847 if (!!disable_radio == test_bit(STATUS_RF_KILL_SW, &priv->status))
2850 IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO %s\n",
2851 disable_radio ? "OFF" : "ON");
2853 if (disable_radio) {
2854 iwl3945_scan_cancel(priv);
2855 /* FIXME: This is a workaround for AP */
2856 if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
2857 spin_lock_irqsave(&priv->lock, flags);
2858 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_SET,
2859 CSR_UCODE_SW_BIT_RFKILL);
2860 spin_unlock_irqrestore(&priv->lock, flags);
2861 iwl3945_send_card_state(priv, CARD_STATE_CMD_DISABLE, 0);
2862 set_bit(STATUS_RF_KILL_SW, &priv->status);
2867 spin_lock_irqsave(&priv->lock, flags);
2868 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2870 clear_bit(STATUS_RF_KILL_SW, &priv->status);
2871 spin_unlock_irqrestore(&priv->lock, flags);
2876 spin_lock_irqsave(&priv->lock, flags);
2877 iwl3945_read32(priv, CSR_UCODE_DRV_GP1);
2878 if (!iwl3945_grab_nic_access(priv))
2879 iwl3945_release_nic_access(priv);
2880 spin_unlock_irqrestore(&priv->lock, flags);
2882 if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
2883 IWL_DEBUG_RF_KILL("Can not turn radio back on - "
2884 "disabled by HW switch\n");
2888 queue_work(priv->workqueue, &priv->restart);
2892 void iwl3945_set_decrypted_flag(struct iwl3945_priv *priv, struct sk_buff *skb,
2893 u32 decrypt_res, struct ieee80211_rx_status *stats)
2896 le16_to_cpu(((struct ieee80211_hdr *)skb->data)->frame_control);
2898 if (priv->active_rxon.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK)
2901 if (!(fc & IEEE80211_FCTL_PROTECTED))
2904 IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res);
2905 switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) {
2906 case RX_RES_STATUS_SEC_TYPE_TKIP:
2907 if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
2908 RX_RES_STATUS_BAD_ICV_MIC)
2909 stats->flag |= RX_FLAG_MMIC_ERROR;
2910 case RX_RES_STATUS_SEC_TYPE_WEP:
2911 case RX_RES_STATUS_SEC_TYPE_CCMP:
2912 if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
2913 RX_RES_STATUS_DECRYPT_OK) {
2914 IWL_DEBUG_RX("hw decrypt successfully!!!\n");
2915 stats->flag |= RX_FLAG_DECRYPTED;
2924 #define IWL_PACKET_RETRY_TIME HZ
2926 int iwl3945_is_duplicate_packet(struct iwl3945_priv *priv, struct ieee80211_hdr *header)
2928 u16 sc = le16_to_cpu(header->seq_ctrl);
2929 u16 seq = (sc & IEEE80211_SCTL_SEQ) >> 4;
2930 u16 frag = sc & IEEE80211_SCTL_FRAG;
2931 u16 *last_seq, *last_frag;
2932 unsigned long *last_time;
2934 switch (priv->iw_mode) {
2935 case IEEE80211_IF_TYPE_IBSS:{
2936 struct list_head *p;
2937 struct iwl3945_ibss_seq *entry = NULL;
2938 u8 *mac = header->addr2;
2939 int index = mac[5] & (IWL_IBSS_MAC_HASH_SIZE - 1);
2941 __list_for_each(p, &priv->ibss_mac_hash[index]) {
2942 entry = list_entry(p, struct iwl3945_ibss_seq, list);
2943 if (!compare_ether_addr(entry->mac, mac))
2946 if (p == &priv->ibss_mac_hash[index]) {
2947 entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
2949 IWL_ERROR("Cannot malloc new mac entry\n");
2952 memcpy(entry->mac, mac, ETH_ALEN);
2953 entry->seq_num = seq;
2954 entry->frag_num = frag;
2955 entry->packet_time = jiffies;
2956 list_add(&entry->list, &priv->ibss_mac_hash[index]);
2959 last_seq = &entry->seq_num;
2960 last_frag = &entry->frag_num;
2961 last_time = &entry->packet_time;
2964 case IEEE80211_IF_TYPE_STA:
2965 last_seq = &priv->last_seq_num;
2966 last_frag = &priv->last_frag_num;
2967 last_time = &priv->last_packet_time;
2972 if ((*last_seq == seq) &&
2973 time_after(*last_time + IWL_PACKET_RETRY_TIME, jiffies)) {
2974 if (*last_frag == frag)
2976 if (*last_frag + 1 != frag)
2977 /* out-of-order fragment */
2983 *last_time = jiffies;
2990 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
2992 #include "iwl-spectrum.h"
2994 #define BEACON_TIME_MASK_LOW 0x00FFFFFF
2995 #define BEACON_TIME_MASK_HIGH 0xFF000000
2996 #define TIME_UNIT 1024
2999 * extended beacon time format
3000 * time in usec will be changed into a 32-bit value in 8:24 format
3001 * the high 1 byte is the beacon counts
3002 * the lower 3 bytes is the time in usec within one beacon interval
3005 static u32 iwl3945_usecs_to_beacons(u32 usec, u32 beacon_interval)
3009 u32 interval = beacon_interval * 1024;
3011 if (!interval || !usec)
3014 quot = (usec / interval) & (BEACON_TIME_MASK_HIGH >> 24);
3015 rem = (usec % interval) & BEACON_TIME_MASK_LOW;
3017 return (quot << 24) + rem;
3020 /* base is usually what we get from ucode with each received frame,
3021 * the same as HW timer counter counting down
3024 static __le32 iwl3945_add_beacon_time(u32 base, u32 addon, u32 beacon_interval)
3026 u32 base_low = base & BEACON_TIME_MASK_LOW;
3027 u32 addon_low = addon & BEACON_TIME_MASK_LOW;
3028 u32 interval = beacon_interval * TIME_UNIT;
3029 u32 res = (base & BEACON_TIME_MASK_HIGH) +
3030 (addon & BEACON_TIME_MASK_HIGH);
3032 if (base_low > addon_low)
3033 res += base_low - addon_low;
3034 else if (base_low < addon_low) {
3035 res += interval + base_low - addon_low;
3040 return cpu_to_le32(res);
3043 static int iwl3945_get_measurement(struct iwl3945_priv *priv,
3044 struct ieee80211_measurement_params *params,
3047 struct iwl3945_spectrum_cmd spectrum;
3048 struct iwl3945_rx_packet *res;
3049 struct iwl3945_host_cmd cmd = {
3050 .id = REPLY_SPECTRUM_MEASUREMENT_CMD,
3051 .data = (void *)&spectrum,
3052 .meta.flags = CMD_WANT_SKB,
3054 u32 add_time = le64_to_cpu(params->start_time);
3056 int spectrum_resp_status;
3057 int duration = le16_to_cpu(params->duration);
3059 if (iwl3945_is_associated(priv))
3061 iwl3945_usecs_to_beacons(
3062 le64_to_cpu(params->start_time) - priv->last_tsf,
3063 le16_to_cpu(priv->rxon_timing.beacon_interval));
3065 memset(&spectrum, 0, sizeof(spectrum));
3067 spectrum.channel_count = cpu_to_le16(1);
3069 RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
3070 spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
3071 cmd.len = sizeof(spectrum);
3072 spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
3074 if (iwl3945_is_associated(priv))
3075 spectrum.start_time =
3076 iwl3945_add_beacon_time(priv->last_beacon_time,
3078 le16_to_cpu(priv->rxon_timing.beacon_interval));
3080 spectrum.start_time = 0;
3082 spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
3083 spectrum.channels[0].channel = params->channel;
3084 spectrum.channels[0].type = type;
3085 if (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)
3086 spectrum.flags |= RXON_FLG_BAND_24G_MSK |
3087 RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK;
3089 rc = iwl3945_send_cmd_sync(priv, &cmd);
3093 res = (struct iwl3945_rx_packet *)cmd.meta.u.skb->data;
3094 if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
3095 IWL_ERROR("Bad return from REPLY_RX_ON_ASSOC command\n");
3099 spectrum_resp_status = le16_to_cpu(res->u.spectrum.status);
3100 switch (spectrum_resp_status) {
3101 case 0: /* Command will be handled */
3102 if (res->u.spectrum.id != 0xff) {
3103 IWL_DEBUG_INFO("Replaced existing measurement: %d\n",
3104 res->u.spectrum.id);
3105 priv->measurement_status &= ~MEASUREMENT_READY;
3107 priv->measurement_status |= MEASUREMENT_ACTIVE;
3111 case 1: /* Command will not be handled */
3116 dev_kfree_skb_any(cmd.meta.u.skb);
3122 static void iwl3945_rx_reply_alive(struct iwl3945_priv *priv,
3123 struct iwl3945_rx_mem_buffer *rxb)
3125 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3126 struct iwl3945_alive_resp *palive;
3127 struct delayed_work *pwork;
3129 palive = &pkt->u.alive_frame;
3131 IWL_DEBUG_INFO("Alive ucode status 0x%08X revision "
3133 palive->is_valid, palive->ver_type,
3134 palive->ver_subtype);
3136 if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
3137 IWL_DEBUG_INFO("Initialization Alive received.\n");
3138 memcpy(&priv->card_alive_init,
3139 &pkt->u.alive_frame,
3140 sizeof(struct iwl3945_init_alive_resp));
3141 pwork = &priv->init_alive_start;
3143 IWL_DEBUG_INFO("Runtime Alive received.\n");
3144 memcpy(&priv->card_alive, &pkt->u.alive_frame,
3145 sizeof(struct iwl3945_alive_resp));
3146 pwork = &priv->alive_start;
3147 iwl3945_disable_events(priv);
3150 /* We delay the ALIVE response by 5ms to
3151 * give the HW RF Kill time to activate... */
3152 if (palive->is_valid == UCODE_VALID_OK)
3153 queue_delayed_work(priv->workqueue, pwork,
3154 msecs_to_jiffies(5));
3156 IWL_WARNING("uCode did not respond OK.\n");
3159 static void iwl3945_rx_reply_add_sta(struct iwl3945_priv *priv,
3160 struct iwl3945_rx_mem_buffer *rxb)
3162 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3164 IWL_DEBUG_RX("Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status);
3168 static void iwl3945_rx_reply_error(struct iwl3945_priv *priv,
3169 struct iwl3945_rx_mem_buffer *rxb)
3171 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3173 IWL_ERROR("Error Reply type 0x%08X cmd %s (0x%02X) "
3174 "seq 0x%04X ser 0x%08X\n",
3175 le32_to_cpu(pkt->u.err_resp.error_type),
3176 get_cmd_string(pkt->u.err_resp.cmd_id),
3177 pkt->u.err_resp.cmd_id,
3178 le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num),
3179 le32_to_cpu(pkt->u.err_resp.error_info));
3182 #define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
3184 static void iwl3945_rx_csa(struct iwl3945_priv *priv, struct iwl3945_rx_mem_buffer *rxb)
3186 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3187 struct iwl3945_rxon_cmd *rxon = (void *)&priv->active_rxon;
3188 struct iwl3945_csa_notification *csa = &(pkt->u.csa_notif);
3189 IWL_DEBUG_11H("CSA notif: channel %d, status %d\n",
3190 le16_to_cpu(csa->channel), le32_to_cpu(csa->status));
3191 rxon->channel = csa->channel;
3192 priv->staging_rxon.channel = csa->channel;
3195 static void iwl3945_rx_spectrum_measure_notif(struct iwl3945_priv *priv,
3196 struct iwl3945_rx_mem_buffer *rxb)
3198 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
3199 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3200 struct iwl3945_spectrum_notification *report = &(pkt->u.spectrum_notif);
3202 if (!report->state) {
3203 IWL_DEBUG(IWL_DL_11H | IWL_DL_INFO,
3204 "Spectrum Measure Notification: Start\n");
3208 memcpy(&priv->measure_report, report, sizeof(*report));
3209 priv->measurement_status |= MEASUREMENT_READY;
3213 static void iwl3945_rx_pm_sleep_notif(struct iwl3945_priv *priv,
3214 struct iwl3945_rx_mem_buffer *rxb)
3216 #ifdef CONFIG_IWL3945_DEBUG
3217 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3218 struct iwl3945_sleep_notification *sleep = &(pkt->u.sleep_notif);
3219 IWL_DEBUG_RX("sleep mode: %d, src: %d\n",
3220 sleep->pm_sleep_mode, sleep->pm_wakeup_src);
3224 static void iwl3945_rx_pm_debug_statistics_notif(struct iwl3945_priv *priv,
3225 struct iwl3945_rx_mem_buffer *rxb)
3227 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3228 IWL_DEBUG_RADIO("Dumping %d bytes of unhandled "
3229 "notification for %s:\n",
3230 le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd));
3231 iwl3945_print_hex_dump(IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
3234 static void iwl3945_bg_beacon_update(struct work_struct *work)
3236 struct iwl3945_priv *priv =
3237 container_of(work, struct iwl3945_priv, beacon_update);
3238 struct sk_buff *beacon;
3240 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
3241 beacon = ieee80211_beacon_get(priv->hw, priv->vif, NULL);
3244 IWL_ERROR("update beacon failed\n");
3248 mutex_lock(&priv->mutex);
3249 /* new beacon skb is allocated every time; dispose previous.*/
3250 if (priv->ibss_beacon)
3251 dev_kfree_skb(priv->ibss_beacon);
3253 priv->ibss_beacon = beacon;
3254 mutex_unlock(&priv->mutex);
3256 iwl3945_send_beacon_cmd(priv);
3259 static void iwl3945_rx_beacon_notif(struct iwl3945_priv *priv,
3260 struct iwl3945_rx_mem_buffer *rxb)
3262 #ifdef CONFIG_IWL3945_DEBUG
3263 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3264 struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status);
3265 u8 rate = beacon->beacon_notify_hdr.rate;
3267 IWL_DEBUG_RX("beacon status %x retries %d iss %d "
3268 "tsf %d %d rate %d\n",
3269 le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
3270 beacon->beacon_notify_hdr.failure_frame,
3271 le32_to_cpu(beacon->ibss_mgr_status),
3272 le32_to_cpu(beacon->high_tsf),
3273 le32_to_cpu(beacon->low_tsf), rate);
3276 if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) &&
3277 (!test_bit(STATUS_EXIT_PENDING, &priv->status)))
3278 queue_work(priv->workqueue, &priv->beacon_update);
3281 /* Service response to REPLY_SCAN_CMD (0x80) */
3282 static void iwl3945_rx_reply_scan(struct iwl3945_priv *priv,
3283 struct iwl3945_rx_mem_buffer *rxb)
3285 #ifdef CONFIG_IWL3945_DEBUG
3286 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3287 struct iwl3945_scanreq_notification *notif =
3288 (struct iwl3945_scanreq_notification *)pkt->u.raw;
3290 IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status);
3294 /* Service SCAN_START_NOTIFICATION (0x82) */
3295 static void iwl3945_rx_scan_start_notif(struct iwl3945_priv *priv,
3296 struct iwl3945_rx_mem_buffer *rxb)
3298 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3299 struct iwl3945_scanstart_notification *notif =
3300 (struct iwl3945_scanstart_notification *)pkt->u.raw;
3301 priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
3302 IWL_DEBUG_SCAN("Scan start: "
3304 "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
3306 notif->band ? "bg" : "a",
3308 notif->tsf_low, notif->status, notif->beacon_timer);
3311 /* Service SCAN_RESULTS_NOTIFICATION (0x83) */
3312 static void iwl3945_rx_scan_results_notif(struct iwl3945_priv *priv,
3313 struct iwl3945_rx_mem_buffer *rxb)
3315 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3316 struct iwl3945_scanresults_notification *notif =
3317 (struct iwl3945_scanresults_notification *)pkt->u.raw;
3319 IWL_DEBUG_SCAN("Scan ch.res: "
3321 "(TSF: 0x%08X:%08X) - %d "
3322 "elapsed=%lu usec (%dms since last)\n",
3324 notif->band ? "bg" : "a",
3325 le32_to_cpu(notif->tsf_high),
3326 le32_to_cpu(notif->tsf_low),
3327 le32_to_cpu(notif->statistics[0]),
3328 le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf,
3329 jiffies_to_msecs(elapsed_jiffies
3330 (priv->last_scan_jiffies, jiffies)));
3332 priv->last_scan_jiffies = jiffies;
3333 priv->next_scan_jiffies = 0;
3336 /* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
3337 static void iwl3945_rx_scan_complete_notif(struct iwl3945_priv *priv,
3338 struct iwl3945_rx_mem_buffer *rxb)
3340 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3341 struct iwl3945_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
3343 IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
3344 scan_notif->scanned_channels,
3345 scan_notif->tsf_low,
3346 scan_notif->tsf_high, scan_notif->status);
3348 /* The HW is no longer scanning */
3349 clear_bit(STATUS_SCAN_HW, &priv->status);
3351 /* The scan completion notification came in, so kill that timer... */
3352 cancel_delayed_work(&priv->scan_check);
3354 IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
3355 (priv->scan_bands == 2) ? "2.4" : "5.2",
3356 jiffies_to_msecs(elapsed_jiffies
3357 (priv->scan_pass_start, jiffies)));
3359 /* Remove this scanned band from the list
3360 * of pending bands to scan */
3363 /* If a request to abort was given, or the scan did not succeed
3364 * then we reset the scan state machine and terminate,
3365 * re-queuing another scan if one has been requested */
3366 if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
3367 IWL_DEBUG_INFO("Aborted scan completed.\n");
3368 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
3370 /* If there are more bands on this scan pass reschedule */
3371 if (priv->scan_bands > 0)
3375 priv->last_scan_jiffies = jiffies;
3376 priv->next_scan_jiffies = 0;
3377 IWL_DEBUG_INFO("Setting scan to off\n");
3379 clear_bit(STATUS_SCANNING, &priv->status);
3381 IWL_DEBUG_INFO("Scan took %dms\n",
3382 jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies)));
3384 queue_work(priv->workqueue, &priv->scan_completed);
3389 priv->scan_pass_start = jiffies;
3390 queue_work(priv->workqueue, &priv->request_scan);
3393 /* Handle notification from uCode that card's power state is changing
3394 * due to software, hardware, or critical temperature RFKILL */
3395 static void iwl3945_rx_card_state_notif(struct iwl3945_priv *priv,
3396 struct iwl3945_rx_mem_buffer *rxb)
3398 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3399 u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
3400 unsigned long status = priv->status;
3402 IWL_DEBUG_RF_KILL("Card state received: HW:%s SW:%s\n",
3403 (flags & HW_CARD_DISABLED) ? "Kill" : "On",
3404 (flags & SW_CARD_DISABLED) ? "Kill" : "On");
3406 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_SET,
3407 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
3409 if (flags & HW_CARD_DISABLED)
3410 set_bit(STATUS_RF_KILL_HW, &priv->status);
3412 clear_bit(STATUS_RF_KILL_HW, &priv->status);
3415 if (flags & SW_CARD_DISABLED)
3416 set_bit(STATUS_RF_KILL_SW, &priv->status);
3418 clear_bit(STATUS_RF_KILL_SW, &priv->status);
3420 iwl3945_scan_cancel(priv);
3422 if ((test_bit(STATUS_RF_KILL_HW, &status) !=
3423 test_bit(STATUS_RF_KILL_HW, &priv->status)) ||
3424 (test_bit(STATUS_RF_KILL_SW, &status) !=
3425 test_bit(STATUS_RF_KILL_SW, &priv->status)))
3426 queue_work(priv->workqueue, &priv->rf_kill);
3428 wake_up_interruptible(&priv->wait_command_queue);
3432 * iwl3945_setup_rx_handlers - Initialize Rx handler callbacks
3434 * Setup the RX handlers for each of the reply types sent from the uCode
3437 * This function chains into the hardware specific files for them to setup
3438 * any hardware specific handlers as well.
3440 static void iwl3945_setup_rx_handlers(struct iwl3945_priv *priv)
3442 priv->rx_handlers[REPLY_ALIVE] = iwl3945_rx_reply_alive;
3443 priv->rx_handlers[REPLY_ADD_STA] = iwl3945_rx_reply_add_sta;
3444 priv->rx_handlers[REPLY_ERROR] = iwl3945_rx_reply_error;
3445 priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl3945_rx_csa;
3446 priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
3447 iwl3945_rx_spectrum_measure_notif;
3448 priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl3945_rx_pm_sleep_notif;
3449 priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
3450 iwl3945_rx_pm_debug_statistics_notif;
3451 priv->rx_handlers[BEACON_NOTIFICATION] = iwl3945_rx_beacon_notif;
3454 * The same handler is used for both the REPLY to a discrete
3455 * statistics request from the host as well as for the periodic
3456 * statistics notifications (after received beacons) from the uCode.
3458 priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl3945_hw_rx_statistics;
3459 priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl3945_hw_rx_statistics;
3461 priv->rx_handlers[REPLY_SCAN_CMD] = iwl3945_rx_reply_scan;
3462 priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl3945_rx_scan_start_notif;
3463 priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
3464 iwl3945_rx_scan_results_notif;
3465 priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
3466 iwl3945_rx_scan_complete_notif;
3467 priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl3945_rx_card_state_notif;
3469 /* Set up hardware specific Rx handlers */
3470 iwl3945_hw_rx_handler_setup(priv);
3474 * iwl3945_cmd_queue_reclaim - Reclaim CMD queue entries
3475 * When FW advances 'R' index, all entries between old and new 'R' index
3476 * need to be reclaimed.
3478 static void iwl3945_cmd_queue_reclaim(struct iwl3945_priv *priv,
3479 int txq_id, int index)
3481 struct iwl3945_tx_queue *txq = &priv->txq[txq_id];
3482 struct iwl3945_queue *q = &txq->q;
3485 if ((index >= q->n_bd) || (iwl3945_x2_queue_used(q, index) == 0)) {
3486 IWL_ERROR("Read index for DMA queue txq id (%d), index %d, "
3487 "is out of range [0-%d] %d %d.\n", txq_id,
3488 index, q->n_bd, q->write_ptr, q->read_ptr);
3492 for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index;
3493 q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
3495 IWL_ERROR("HCMD skipped: index (%d) %d %d\n", index,
3496 q->write_ptr, q->read_ptr);
3497 queue_work(priv->workqueue, &priv->restart);
3506 * iwl3945_tx_cmd_complete - Pull unused buffers off the queue and reclaim them
3507 * @rxb: Rx buffer to reclaim
3509 * If an Rx buffer has an async callback associated with it the callback
3510 * will be executed. The attached skb (if present) will only be freed
3511 * if the callback returns 1
3513 static void iwl3945_tx_cmd_complete(struct iwl3945_priv *priv,
3514 struct iwl3945_rx_mem_buffer *rxb)
3516 struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data;
3517 u16 sequence = le16_to_cpu(pkt->hdr.sequence);
3518 int txq_id = SEQ_TO_QUEUE(sequence);
3519 int index = SEQ_TO_INDEX(sequence);
3520 int huge = sequence & SEQ_HUGE_FRAME;
3522 struct iwl3945_cmd *cmd;
3524 BUG_ON(txq_id != IWL_CMD_QUEUE_NUM);
3526 cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge);
3527 cmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index];
3529 /* Input error checking is done when commands are added to queue. */
3530 if (cmd->meta.flags & CMD_WANT_SKB) {
3531 cmd->meta.source->u.skb = rxb->skb;
3533 } else if (cmd->meta.u.callback &&
3534 !cmd->meta.u.callback(priv, cmd, rxb->skb))
3537 iwl3945_cmd_queue_reclaim(priv, txq_id, index);
3539 if (!(cmd->meta.flags & CMD_ASYNC)) {
3540 clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
3541 wake_up_interruptible(&priv->wait_command_queue);
3545 /************************** RX-FUNCTIONS ****************************/
3547 * Rx theory of operation
3549 * The host allocates 32 DMA target addresses and passes the host address
3550 * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is
3554 * The host/firmware share two index registers for managing the Rx buffers.
3556 * The READ index maps to the first position that the firmware may be writing
3557 * to -- the driver can read up to (but not including) this position and get
3559 * The READ index is managed by the firmware once the card is enabled.
3561 * The WRITE index maps to the last position the driver has read from -- the
3562 * position preceding WRITE is the last slot the firmware can place a packet.
3564 * The queue is empty (no good data) if WRITE = READ - 1, and is full if
3567 * During initialization, the host sets up the READ queue position to the first
3568 * INDEX position, and WRITE to the last (READ - 1 wrapped)
3570 * When the firmware places a packet in a buffer, it will advance the READ index
3571 * and fire the RX interrupt. The driver can then query the READ index and
3572 * process as many packets as possible, moving the WRITE index forward as it
3573 * resets the Rx queue buffers with new memory.
3575 * The management in the driver is as follows:
3576 * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
3577 * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
3578 * to replenish the iwl->rxq->rx_free.
3579 * + In iwl3945_rx_replenish (scheduled) if 'processed' != 'read' then the
3580 * iwl->rxq is replenished and the READ INDEX is updated (updating the
3581 * 'processed' and 'read' driver indexes as well)
3582 * + A received packet is processed and handed to the kernel network stack,
3583 * detached from the iwl->rxq. The driver 'processed' index is updated.
3584 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
3585 * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
3586 * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
3587 * were enough free buffers and RX_STALLED is set it is cleared.
3592 * iwl3945_rx_queue_alloc() Allocates rx_free
3593 * iwl3945_rx_replenish() Replenishes rx_free list from rx_used, and calls
3594 * iwl3945_rx_queue_restock
3595 * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx
3596 * queue, updates firmware pointers, and updates
3597 * the WRITE index. If insufficient rx_free buffers
3598 * are available, schedules iwl3945_rx_replenish
3600 * -- enable interrupts --
3601 * ISR - iwl3945_rx() Detach iwl3945_rx_mem_buffers from pool up to the
3602 * READ INDEX, detaching the SKB from the pool.
3603 * Moves the packet buffer from queue to rx_used.
3604 * Calls iwl3945_rx_queue_restock to refill any empty
3611 * iwl3945_rx_queue_space - Return number of free slots available in queue.
3613 static int iwl3945_rx_queue_space(const struct iwl3945_rx_queue *q)
3615 int s = q->read - q->write;
3618 /* keep some buffer to not confuse full and empty queue */
3626 * iwl3945_rx_queue_update_write_ptr - Update the write pointer for the RX queue
3628 int iwl3945_rx_queue_update_write_ptr(struct iwl3945_priv *priv, struct iwl3945_rx_queue *q)
3632 unsigned long flags;
3634 spin_lock_irqsave(&q->lock, flags);
3636 if (q->need_update == 0)
3639 /* If power-saving is in use, make sure device is awake */
3640 if (test_bit(STATUS_POWER_PMI, &priv->status)) {
3641 reg = iwl3945_read32(priv, CSR_UCODE_DRV_GP1);
3643 if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
3644 iwl3945_set_bit(priv, CSR_GP_CNTRL,
3645 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
3649 rc = iwl3945_grab_nic_access(priv);
3653 /* Device expects a multiple of 8 */
3654 iwl3945_write_direct32(priv, FH_RSCSR_CHNL0_WPTR,
3656 iwl3945_release_nic_access(priv);
3658 /* Else device is assumed to be awake */
3660 /* Device expects a multiple of 8 */
3661 iwl3945_write32(priv, FH_RSCSR_CHNL0_WPTR, q->write & ~0x7);
3667 spin_unlock_irqrestore(&q->lock, flags);
3672 * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
3674 static inline __le32 iwl3945_dma_addr2rbd_ptr(struct iwl3945_priv *priv,
3675 dma_addr_t dma_addr)
3677 return cpu_to_le32((u32)dma_addr);
3681 * iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool
3683 * If there are slots in the RX queue that need to be restocked,
3684 * and we have free pre-allocated buffers, fill the ranks as much
3685 * as we can, pulling from rx_free.
3687 * This moves the 'write' index forward to catch up with 'processed', and
3688 * also updates the memory address in the firmware to reference the new
3691 static int iwl3945_rx_queue_restock(struct iwl3945_priv *priv)
3693 struct iwl3945_rx_queue *rxq = &priv->rxq;
3694 struct list_head *element;
3695 struct iwl3945_rx_mem_buffer *rxb;
3696 unsigned long flags;
3699 spin_lock_irqsave(&rxq->lock, flags);
3700 write = rxq->write & ~0x7;
3701 while ((iwl3945_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
3702 /* Get next free Rx buffer, remove from free list */
3703 element = rxq->rx_free.next;
3704 rxb = list_entry(element, struct iwl3945_rx_mem_buffer, list);
3707 /* Point to Rx buffer via next RBD in circular buffer */
3708 rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->dma_addr);
3709 rxq->queue[rxq->write] = rxb;
3710 rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
3713 spin_unlock_irqrestore(&rxq->lock, flags);
3714 /* If the pre-allocated buffer pool is dropping low, schedule to
3716 if (rxq->free_count <= RX_LOW_WATERMARK)
3717 queue_work(priv->workqueue, &priv->rx_replenish);
3720 /* If we've added more space for the firmware to place data, tell it.
3721 * Increment device's write pointer in multiples of 8. */
3722 if ((write != (rxq->write & ~0x7))
3723 || (abs(rxq->write - rxq->read) > 7)) {
3724 spin_lock_irqsave(&rxq->lock, flags);
3725 rxq->need_update = 1;
3726 spin_unlock_irqrestore(&rxq->lock, flags);
3727 rc = iwl3945_rx_queue_update_write_ptr(priv, rxq);
3736 * iwl3945_rx_replenish - Move all used packet from rx_used to rx_free
3738 * When moving to rx_free an SKB is allocated for the slot.
3740 * Also restock the Rx queue via iwl3945_rx_queue_restock.
3741 * This is called as a scheduled work item (except for during initialization)
3743 static void iwl3945_rx_allocate(struct iwl3945_priv *priv)
3745 struct iwl3945_rx_queue *rxq = &priv->rxq;
3746 struct list_head *element;
3747 struct iwl3945_rx_mem_buffer *rxb;
3748 unsigned long flags;
3749 spin_lock_irqsave(&rxq->lock, flags);
3750 while (!list_empty(&rxq->rx_used)) {
3751 element = rxq->rx_used.next;
3752 rxb = list_entry(element, struct iwl3945_rx_mem_buffer, list);
3754 /* Alloc a new receive buffer */
3756 alloc_skb(IWL_RX_BUF_SIZE, __GFP_NOWARN | GFP_ATOMIC);
3758 if (net_ratelimit())
3759 printk(KERN_CRIT DRV_NAME
3760 ": Can not allocate SKB buffers\n");
3761 /* We don't reschedule replenish work here -- we will
3762 * call the restock method and if it still needs
3763 * more buffers it will schedule replenish */
3767 /* If radiotap head is required, reserve some headroom here.
3768 * The physical head count is a variable rx_stats->phy_count.
3769 * We reserve 4 bytes here. Plus these extra bytes, the
3770 * headroom of the physical head should be enough for the
3771 * radiotap head that iwl3945 supported. See iwl3945_rt.
3773 skb_reserve(rxb->skb, 4);
3775 priv->alloc_rxb_skb++;
3778 /* Get physical address of RB/SKB */
3780 pci_map_single(priv->pci_dev, rxb->skb->data,
3781 IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
3782 list_add_tail(&rxb->list, &rxq->rx_free);
3785 spin_unlock_irqrestore(&rxq->lock, flags);
3789 * this should be called while priv->lock is locked
3791 static void __iwl3945_rx_replenish(void *data)
3793 struct iwl3945_priv *priv = data;
3795 iwl3945_rx_allocate(priv);
3796 iwl3945_rx_queue_restock(priv);
3800 void iwl3945_rx_replenish(void *data)
3802 struct iwl3945_priv *priv = data;
3803 unsigned long flags;
3805 iwl3945_rx_allocate(priv);
3807 spin_lock_irqsave(&priv->lock, flags);
3808 iwl3945_rx_queue_restock(priv);
3809 spin_unlock_irqrestore(&priv->lock, flags);
3812 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
3813 * If an SKB has been detached, the POOL needs to have its SKB set to NULL
3814 * This free routine walks the list of POOL entries and if SKB is set to
3815 * non NULL it is unmapped and freed
3817 static void iwl3945_rx_queue_free(struct iwl3945_priv *priv, struct iwl3945_rx_queue *rxq)
3820 for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
3821 if (rxq->pool[i].skb != NULL) {
3822 pci_unmap_single(priv->pci_dev,
3823 rxq->pool[i].dma_addr,
3824 IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
3825 dev_kfree_skb(rxq->pool[i].skb);
3829 pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd,
3834 int iwl3945_rx_queue_alloc(struct iwl3945_priv *priv)
3836 struct iwl3945_rx_queue *rxq = &priv->rxq;
3837 struct pci_dev *dev = priv->pci_dev;
3840 spin_lock_init(&rxq->lock);
3841 INIT_LIST_HEAD(&rxq->rx_free);
3842 INIT_LIST_HEAD(&rxq->rx_used);
3844 /* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */
3845 rxq->bd = pci_alloc_consistent(dev, 4 * RX_QUEUE_SIZE, &rxq->dma_addr);
3849 /* Fill the rx_used queue with _all_ of the Rx buffers */
3850 for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++)
3851 list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
3853 /* Set us so that we have processed and used all buffers, but have
3854 * not restocked the Rx queue with fresh buffers */
3855 rxq->read = rxq->write = 0;
3856 rxq->free_count = 0;
3857 rxq->need_update = 0;
3861 void iwl3945_rx_queue_reset(struct iwl3945_priv *priv, struct iwl3945_rx_queue *rxq)
3863 unsigned long flags;
3865 spin_lock_irqsave(&rxq->lock, flags);
3866 INIT_LIST_HEAD(&rxq->rx_free);
3867 INIT_LIST_HEAD(&rxq->rx_used);
3868 /* Fill the rx_used queue with _all_ of the Rx buffers */
3869 for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
3870 /* In the reset function, these buffers may have been allocated
3871 * to an SKB, so we need to unmap and free potential storage */
3872 if (rxq->pool[i].skb != NULL) {
3873 pci_unmap_single(priv->pci_dev,
3874 rxq->pool[i].dma_addr,
3875 IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
3876 priv->alloc_rxb_skb--;
3877 dev_kfree_skb(rxq->pool[i].skb);
3878 rxq->pool[i].skb = NULL;
3880 list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
3883 /* Set us so that we have processed and used all buffers, but have
3884 * not restocked the Rx queue with fresh buffers */
3885 rxq->read = rxq->write = 0;
3886 rxq->free_count = 0;
3887 spin_unlock_irqrestore(&rxq->lock, flags);
3890 /* Convert linear signal-to-noise ratio into dB */
3891 static u8 ratio2dB[100] = {
3892 /* 0 1 2 3 4 5 6 7 8 9 */
3893 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
3894 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
3895 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
3896 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
3897 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
3898 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
3899 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
3900 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
3901 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
3902 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
3905 /* Calculates a relative dB value from a ratio of linear
3906 * (i.e. not dB) signal levels.
3907 * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
3908 int iwl3945_calc_db_from_ratio(int sig_ratio)
3910 /* 1000:1 or higher just report as 60 dB */
3911 if (sig_ratio >= 1000)
3914 /* 100:1 or higher, divide by 10 and use table,
3915 * add 20 dB to make up for divide by 10 */
3916 if (sig_ratio >= 100)
3917 return (20 + (int)ratio2dB[sig_ratio/10]);
3919 /* We shouldn't see this */
3923 /* Use table for ratios 1:1 - 99:1 */
3924 return (int)ratio2dB[sig_ratio];
3927 #define PERFECT_RSSI (-20) /* dBm */
3928 #define WORST_RSSI (-95) /* dBm */
3929 #define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
3931 /* Calculate an indication of rx signal quality (a percentage, not dBm!).
3932 * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
3933 * about formulas used below. */
3934 int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm)
3937 int degradation = PERFECT_RSSI - rssi_dbm;
3939 /* If we get a noise measurement, use signal-to-noise ratio (SNR)
3940 * as indicator; formula is (signal dbm - noise dbm).
3941 * SNR at or above 40 is a great signal (100%).
3942 * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
3943 * Weakest usable signal is usually 10 - 15 dB SNR. */
3945 if (rssi_dbm - noise_dbm >= 40)
3947 else if (rssi_dbm < noise_dbm)
3949 sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
3951 /* Else use just the signal level.
3952 * This formula is a least squares fit of data points collected and
3953 * compared with a reference system that had a percentage (%) display
3954 * for signal quality. */
3956 sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
3957 (15 * RSSI_RANGE + 62 * degradation)) /
3958 (RSSI_RANGE * RSSI_RANGE);
3962 else if (sig_qual < 1)
3969 * iwl3945_rx_handle - Main entry function for receiving responses from uCode
3971 * Uses the priv->rx_handlers callback function array to invoke
3972 * the appropriate handlers, including command responses,
3973 * frame-received notifications, and other notifications.
3975 static void iwl3945_rx_handle(struct iwl3945_priv *priv)
3977 struct iwl3945_rx_mem_buffer *rxb;
3978 struct iwl3945_rx_packet *pkt;
3979 struct iwl3945_rx_queue *rxq = &priv->rxq;
3982 unsigned long flags;
3986 /* uCode's read index (stored in shared DRAM) indicates the last Rx
3987 * buffer that the driver may process (last buffer filled by ucode). */
3988 r = iwl3945_hw_get_rx_read(priv);
3991 if (iwl3945_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2))
3993 /* Rx interrupt, but nothing sent from uCode */
3995 IWL_DEBUG(IWL_DL_RX | IWL_DL_ISR, "r = %d, i = %d\n", r, i);
3998 rxb = rxq->queue[i];
4000 /* If an RXB doesn't have a Rx queue slot associated with it,
4001 * then a bug has been introduced in the queue refilling
4002 * routines -- catch it here */
4003 BUG_ON(rxb == NULL);
4005 rxq->queue[i] = NULL;
4007 pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr,
4009 PCI_DMA_FROMDEVICE);
4010 pkt = (struct iwl3945_rx_packet *)rxb->skb->data;
4012 /* Reclaim a command buffer only if this packet is a response
4013 * to a (driver-originated) command.
4014 * If the packet (e.g. Rx frame) originated from uCode,
4015 * there is no command buffer to reclaim.
4016 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
4017 * but apparently a few don't get set; catch them here. */
4018 reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
4019 (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
4020 (pkt->hdr.cmd != REPLY_TX);
4022 /* Based on type of command response or notification,
4023 * handle those that need handling via function in
4024 * rx_handlers table. See iwl3945_setup_rx_handlers() */
4025 if (priv->rx_handlers[pkt->hdr.cmd]) {
4026 IWL_DEBUG(IWL_DL_HOST_COMMAND | IWL_DL_RX | IWL_DL_ISR,
4027 "r = %d, i = %d, %s, 0x%02x\n", r, i,
4028 get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
4029 priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
4031 /* No handling needed */
4032 IWL_DEBUG(IWL_DL_HOST_COMMAND | IWL_DL_RX | IWL_DL_ISR,
4033 "r %d i %d No handler needed for %s, 0x%02x\n",
4034 r, i, get_cmd_string(pkt->hdr.cmd),
4039 /* Invoke any callbacks, transfer the skb to caller, and
4040 * fire off the (possibly) blocking iwl3945_send_cmd()
4041 * as we reclaim the driver command queue */
4042 if (rxb && rxb->skb)
4043 iwl3945_tx_cmd_complete(priv, rxb);
4045 IWL_WARNING("Claim null rxb?\n");
4048 /* For now we just don't re-use anything. We can tweak this
4049 * later to try and re-use notification packets and SKBs that
4050 * fail to Rx correctly */
4051 if (rxb->skb != NULL) {
4052 priv->alloc_rxb_skb--;
4053 dev_kfree_skb_any(rxb->skb);
4057 pci_unmap_single(priv->pci_dev, rxb->dma_addr,
4058 IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
4059 spin_lock_irqsave(&rxq->lock, flags);
4060 list_add_tail(&rxb->list, &priv->rxq.rx_used);
4061 spin_unlock_irqrestore(&rxq->lock, flags);
4062 i = (i + 1) & RX_QUEUE_MASK;
4063 /* If there are a lot of unused frames,
4064 * restock the Rx queue so ucode won't assert. */
4069 __iwl3945_rx_replenish(priv);
4075 /* Backtrack one entry */
4077 iwl3945_rx_queue_restock(priv);
4081 * iwl3945_tx_queue_update_write_ptr - Send new write index to hardware
4083 static int iwl3945_tx_queue_update_write_ptr(struct iwl3945_priv *priv,
4084 struct iwl3945_tx_queue *txq)
4088 int txq_id = txq->q.id;
4090 if (txq->need_update == 0)
4093 /* if we're trying to save power */
4094 if (test_bit(STATUS_POWER_PMI, &priv->status)) {
4095 /* wake up nic if it's powered down ...
4096 * uCode will wake up, and interrupt us again, so next
4097 * time we'll skip this part. */
4098 reg = iwl3945_read32(priv, CSR_UCODE_DRV_GP1);
4100 if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
4101 IWL_DEBUG_INFO("Requesting wakeup, GP1 = 0x%x\n", reg);
4102 iwl3945_set_bit(priv, CSR_GP_CNTRL,
4103 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
4107 /* restore this queue's parameters in nic hardware. */
4108 rc = iwl3945_grab_nic_access(priv);
4111 iwl3945_write_direct32(priv, HBUS_TARG_WRPTR,
4112 txq->q.write_ptr | (txq_id << 8));
4113 iwl3945_release_nic_access(priv);
4115 /* else not in power-save mode, uCode will never sleep when we're
4116 * trying to tx (during RFKILL, we're not trying to tx). */
4118 iwl3945_write32(priv, HBUS_TARG_WRPTR,
4119 txq->q.write_ptr | (txq_id << 8));
4121 txq->need_update = 0;
4126 #ifdef CONFIG_IWL3945_DEBUG
4127 static void iwl3945_print_rx_config_cmd(struct iwl3945_rxon_cmd *rxon)
4129 DECLARE_MAC_BUF(mac);
4131 IWL_DEBUG_RADIO("RX CONFIG:\n");
4132 iwl3945_print_hex_dump(IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
4133 IWL_DEBUG_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon->channel));
4134 IWL_DEBUG_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags));
4135 IWL_DEBUG_RADIO("u32 filter_flags: 0x%08x\n",
4136 le32_to_cpu(rxon->filter_flags));
4137 IWL_DEBUG_RADIO("u8 dev_type: 0x%x\n", rxon->dev_type);
4138 IWL_DEBUG_RADIO("u8 ofdm_basic_rates: 0x%02x\n",
4139 rxon->ofdm_basic_rates);
4140 IWL_DEBUG_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates);
4141 IWL_DEBUG_RADIO("u8[6] node_addr: %s\n",
4142 print_mac(mac, rxon->node_addr));
4143 IWL_DEBUG_RADIO("u8[6] bssid_addr: %s\n",
4144 print_mac(mac, rxon->bssid_addr));
4145 IWL_DEBUG_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
4149 static void iwl3945_enable_interrupts(struct iwl3945_priv *priv)
4151 IWL_DEBUG_ISR("Enabling interrupts\n");
4152 set_bit(STATUS_INT_ENABLED, &priv->status);
4153 iwl3945_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK);
4157 /* call this function to flush any scheduled tasklet */
4158 static inline void iwl_synchronize_irq(struct iwl3945_priv *priv)
4160 /* wait to make sure we flush pedding tasklet*/
4161 synchronize_irq(priv->pci_dev->irq);
4162 tasklet_kill(&priv->irq_tasklet);
4166 static inline void iwl3945_disable_interrupts(struct iwl3945_priv *priv)
4168 clear_bit(STATUS_INT_ENABLED, &priv->status);
4170 /* disable interrupts from uCode/NIC to host */
4171 iwl3945_write32(priv, CSR_INT_MASK, 0x00000000);
4173 /* acknowledge/clear/reset any interrupts still pending
4174 * from uCode or flow handler (Rx/Tx DMA) */
4175 iwl3945_write32(priv, CSR_INT, 0xffffffff);
4176 iwl3945_write32(priv, CSR_FH_INT_STATUS, 0xffffffff);
4177 IWL_DEBUG_ISR("Disabled interrupts\n");
4180 static const char *desc_lookup(int i)
4188 return "BAD_CHECKSUM";
4190 return "NMI_INTERRUPT";
4194 return "FATAL_ERROR";
4200 #define ERROR_START_OFFSET (1 * sizeof(u32))
4201 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
4203 static void iwl3945_dump_nic_error_log(struct iwl3945_priv *priv)
4206 u32 desc, time, count, base, data1;
4207 u32 blink1, blink2, ilink1, ilink2;
4210 base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
4212 if (!iwl3945_hw_valid_rtc_data_addr(base)) {
4213 IWL_ERROR("Not valid error log pointer 0x%08X\n", base);
4217 rc = iwl3945_grab_nic_access(priv);
4219 IWL_WARNING("Can not read from adapter at this time.\n");
4223 count = iwl3945_read_targ_mem(priv, base);
4225 if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
4226 IWL_ERROR("Start IWL Error Log Dump:\n");
4227 IWL_ERROR("Status: 0x%08lX, count: %d\n", priv->status, count);
4230 IWL_ERROR("Desc Time asrtPC blink2 "
4231 "ilink1 nmiPC Line\n");
4232 for (i = ERROR_START_OFFSET;
4233 i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
4234 i += ERROR_ELEM_SIZE) {
4235 desc = iwl3945_read_targ_mem(priv, base + i);
4237 iwl3945_read_targ_mem(priv, base + i + 1 * sizeof(u32));
4239 iwl3945_read_targ_mem(priv, base + i + 2 * sizeof(u32));
4241 iwl3945_read_targ_mem(priv, base + i + 3 * sizeof(u32));
4243 iwl3945_read_targ_mem(priv, base + i + 4 * sizeof(u32));
4245 iwl3945_read_targ_mem(priv, base + i + 5 * sizeof(u32));
4247 iwl3945_read_targ_mem(priv, base + i + 6 * sizeof(u32));
4250 ("%-13s (#%d) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
4251 desc_lookup(desc), desc, time, blink1, blink2,
4252 ilink1, ilink2, data1);
4255 iwl3945_release_nic_access(priv);
4259 #define EVENT_START_OFFSET (6 * sizeof(u32))
4262 * iwl3945_print_event_log - Dump error event log to syslog
4264 * NOTE: Must be called with iwl3945_grab_nic_access() already obtained!
4266 static void iwl3945_print_event_log(struct iwl3945_priv *priv, u32 start_idx,
4267 u32 num_events, u32 mode)
4270 u32 base; /* SRAM byte address of event log header */
4271 u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
4272 u32 ptr; /* SRAM byte address of log data */
4273 u32 ev, time, data; /* event log data */
4275 if (num_events == 0)
4278 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
4281 event_size = 2 * sizeof(u32);
4283 event_size = 3 * sizeof(u32);
4285 ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
4287 /* "time" is actually "data" for mode 0 (no timestamp).
4288 * place event id # at far right for easier visual parsing. */
4289 for (i = 0; i < num_events; i++) {
4290 ev = iwl3945_read_targ_mem(priv, ptr);
4292 time = iwl3945_read_targ_mem(priv, ptr);
4295 IWL_ERROR("0x%08x\t%04u\n", time, ev); /* data, ev */
4297 data = iwl3945_read_targ_mem(priv, ptr);
4299 IWL_ERROR("%010u\t0x%08x\t%04u\n", time, data, ev);
4304 static void iwl3945_dump_nic_event_log(struct iwl3945_priv *priv)
4307 u32 base; /* SRAM byte address of event log header */
4308 u32 capacity; /* event log capacity in # entries */
4309 u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
4310 u32 num_wraps; /* # times uCode wrapped to top of log */
4311 u32 next_entry; /* index of next entry to be written by uCode */
4312 u32 size; /* # entries that we'll print */
4314 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
4315 if (!iwl3945_hw_valid_rtc_data_addr(base)) {
4316 IWL_ERROR("Invalid event log pointer 0x%08X\n", base);
4320 rc = iwl3945_grab_nic_access(priv);
4322 IWL_WARNING("Can not read from adapter at this time.\n");
4326 /* event log header */
4327 capacity = iwl3945_read_targ_mem(priv, base);
4328 mode = iwl3945_read_targ_mem(priv, base + (1 * sizeof(u32)));
4329 num_wraps = iwl3945_read_targ_mem(priv, base + (2 * sizeof(u32)));
4330 next_entry = iwl3945_read_targ_mem(priv, base + (3 * sizeof(u32)));
4332 size = num_wraps ? capacity : next_entry;
4334 /* bail out if nothing in log */
4336 IWL_ERROR("Start IWL Event Log Dump: nothing in log\n");
4337 iwl3945_release_nic_access(priv);
4341 IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n",
4344 /* if uCode has wrapped back to top of log, start at the oldest entry,
4345 * i.e the next one that uCode would fill. */
4347 iwl3945_print_event_log(priv, next_entry,
4348 capacity - next_entry, mode);
4350 /* (then/else) start at top of log */
4351 iwl3945_print_event_log(priv, 0, next_entry, mode);
4353 iwl3945_release_nic_access(priv);
4357 * iwl3945_irq_handle_error - called for HW or SW error interrupt from card
4359 static void iwl3945_irq_handle_error(struct iwl3945_priv *priv)
4361 /* Set the FW error flag -- cleared on iwl3945_down */
4362 set_bit(STATUS_FW_ERROR, &priv->status);
4364 /* Cancel currently queued command. */
4365 clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
4367 #ifdef CONFIG_IWL3945_DEBUG
4368 if (iwl3945_debug_level & IWL_DL_FW_ERRORS) {
4369 iwl3945_dump_nic_error_log(priv);
4370 iwl3945_dump_nic_event_log(priv);
4371 iwl3945_print_rx_config_cmd(&priv->staging_rxon);
4375 wake_up_interruptible(&priv->wait_command_queue);
4377 /* Keep the restart process from trying to send host
4378 * commands by clearing the INIT status bit */
4379 clear_bit(STATUS_READY, &priv->status);
4381 if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
4382 IWL_DEBUG(IWL_DL_INFO | IWL_DL_FW_ERRORS,
4383 "Restarting adapter due to uCode error.\n");
4385 if (iwl3945_is_associated(priv)) {
4386 memcpy(&priv->recovery_rxon, &priv->active_rxon,
4387 sizeof(priv->recovery_rxon));
4388 priv->error_recovering = 1;
4390 queue_work(priv->workqueue, &priv->restart);
4394 static void iwl3945_error_recovery(struct iwl3945_priv *priv)
4396 unsigned long flags;
4398 memcpy(&priv->staging_rxon, &priv->recovery_rxon,
4399 sizeof(priv->staging_rxon));
4400 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
4401 iwl3945_commit_rxon(priv);
4403 iwl3945_add_station(priv, priv->bssid, 1, 0);
4405 spin_lock_irqsave(&priv->lock, flags);
4406 priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id);
4407 priv->error_recovering = 0;
4408 spin_unlock_irqrestore(&priv->lock, flags);
4411 static void iwl3945_irq_tasklet(struct iwl3945_priv *priv)
4413 u32 inta, handled = 0;
4415 unsigned long flags;
4416 #ifdef CONFIG_IWL3945_DEBUG
4420 spin_lock_irqsave(&priv->lock, flags);
4422 /* Ack/clear/reset pending uCode interrupts.
4423 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
4424 * and will clear only when CSR_FH_INT_STATUS gets cleared. */
4425 inta = iwl3945_read32(priv, CSR_INT);
4426 iwl3945_write32(priv, CSR_INT, inta);
4428 /* Ack/clear/reset pending flow-handler (DMA) interrupts.
4429 * Any new interrupts that happen after this, either while we're
4430 * in this tasklet, or later, will show up in next ISR/tasklet. */
4431 inta_fh = iwl3945_read32(priv, CSR_FH_INT_STATUS);
4432 iwl3945_write32(priv, CSR_FH_INT_STATUS, inta_fh);
4434 #ifdef CONFIG_IWL3945_DEBUG
4435 if (iwl3945_debug_level & IWL_DL_ISR) {
4436 /* just for debug */
4437 inta_mask = iwl3945_read32(priv, CSR_INT_MASK);
4438 IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
4439 inta, inta_mask, inta_fh);
4443 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
4444 * atomic, make sure that inta covers all the interrupts that
4445 * we've discovered, even if FH interrupt came in just after
4446 * reading CSR_INT. */
4447 if (inta_fh & CSR39_FH_INT_RX_MASK)
4448 inta |= CSR_INT_BIT_FH_RX;
4449 if (inta_fh & CSR39_FH_INT_TX_MASK)
4450 inta |= CSR_INT_BIT_FH_TX;
4452 /* Now service all interrupt bits discovered above. */
4453 if (inta & CSR_INT_BIT_HW_ERR) {
4454 IWL_ERROR("Microcode HW error detected. Restarting.\n");
4456 /* Tell the device to stop sending interrupts */
4457 iwl3945_disable_interrupts(priv);
4459 iwl3945_irq_handle_error(priv);
4461 handled |= CSR_INT_BIT_HW_ERR;
4463 spin_unlock_irqrestore(&priv->lock, flags);
4468 #ifdef CONFIG_IWL3945_DEBUG
4469 if (iwl3945_debug_level & (IWL_DL_ISR)) {
4470 /* NIC fires this, but we don't use it, redundant with WAKEUP */
4471 if (inta & CSR_INT_BIT_SCD)
4472 IWL_DEBUG_ISR("Scheduler finished to transmit "
4473 "the frame/frames.\n");
4475 /* Alive notification via Rx interrupt will do the real work */
4476 if (inta & CSR_INT_BIT_ALIVE)
4477 IWL_DEBUG_ISR("Alive interrupt\n");
4480 /* Safely ignore these bits for debug checks below */
4481 inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
4483 /* HW RF KILL switch toggled (4965 only) */
4484 if (inta & CSR_INT_BIT_RF_KILL) {
4486 if (!(iwl3945_read32(priv, CSR_GP_CNTRL) &
4487 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
4490 IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL | IWL_DL_ISR,
4491 "RF_KILL bit toggled to %s.\n",
4492 hw_rf_kill ? "disable radio":"enable radio");
4494 /* Queue restart only if RF_KILL switch was set to "kill"
4495 * when we loaded driver, and is now set to "enable".
4496 * After we're Alive, RF_KILL gets handled by
4497 * iwl3945_rx_card_state_notif() */
4498 if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) {
4499 clear_bit(STATUS_RF_KILL_HW, &priv->status);
4500 queue_work(priv->workqueue, &priv->restart);
4503 handled |= CSR_INT_BIT_RF_KILL;
4506 /* Chip got too hot and stopped itself (4965 only) */
4507 if (inta & CSR_INT_BIT_CT_KILL) {
4508 IWL_ERROR("Microcode CT kill error detected.\n");
4509 handled |= CSR_INT_BIT_CT_KILL;
4512 /* Error detected by uCode */
4513 if (inta & CSR_INT_BIT_SW_ERR) {
4514 IWL_ERROR("Microcode SW error detected. Restarting 0x%X.\n",
4516 iwl3945_irq_handle_error(priv);
4517 handled |= CSR_INT_BIT_SW_ERR;
4520 /* uCode wakes up after power-down sleep */
4521 if (inta & CSR_INT_BIT_WAKEUP) {
4522 IWL_DEBUG_ISR("Wakeup interrupt\n");
4523 iwl3945_rx_queue_update_write_ptr(priv, &priv->rxq);
4524 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[0]);
4525 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[1]);
4526 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[2]);
4527 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[3]);
4528 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[4]);
4529 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[5]);
4531 handled |= CSR_INT_BIT_WAKEUP;
4534 /* All uCode command responses, including Tx command responses,
4535 * Rx "responses" (frame-received notification), and other
4536 * notifications from uCode come through here*/
4537 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
4538 iwl3945_rx_handle(priv);
4539 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
4542 if (inta & CSR_INT_BIT_FH_TX) {
4543 IWL_DEBUG_ISR("Tx interrupt\n");
4545 iwl3945_write32(priv, CSR_FH_INT_STATUS, (1 << 6));
4546 if (!iwl3945_grab_nic_access(priv)) {
4547 iwl3945_write_direct32(priv,
4549 (ALM_FH_SRVC_CHNL), 0x0);
4550 iwl3945_release_nic_access(priv);
4552 handled |= CSR_INT_BIT_FH_TX;
4555 if (inta & ~handled)
4556 IWL_ERROR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
4558 if (inta & ~CSR_INI_SET_MASK) {
4559 IWL_WARNING("Disabled INTA bits 0x%08x were pending\n",
4560 inta & ~CSR_INI_SET_MASK);
4561 IWL_WARNING(" with FH_INT = 0x%08x\n", inta_fh);
4564 /* Re-enable all interrupts */
4565 /* only Re-enable if disabled by irq */
4566 if (test_bit(STATUS_INT_ENABLED, &priv->status))
4567 iwl3945_enable_interrupts(priv);
4569 #ifdef CONFIG_IWL3945_DEBUG
4570 if (iwl3945_debug_level & (IWL_DL_ISR)) {
4571 inta = iwl3945_read32(priv, CSR_INT);
4572 inta_mask = iwl3945_read32(priv, CSR_INT_MASK);
4573 inta_fh = iwl3945_read32(priv, CSR_FH_INT_STATUS);
4574 IWL_DEBUG_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
4575 "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
4578 spin_unlock_irqrestore(&priv->lock, flags);
4581 static irqreturn_t iwl3945_isr(int irq, void *data)
4583 struct iwl3945_priv *priv = data;
4584 u32 inta, inta_mask;
4589 spin_lock(&priv->lock);
4591 /* Disable (but don't clear!) interrupts here to avoid
4592 * back-to-back ISRs and sporadic interrupts from our NIC.
4593 * If we have something to service, the tasklet will re-enable ints.
4594 * If we *don't* have something, we'll re-enable before leaving here. */
4595 inta_mask = iwl3945_read32(priv, CSR_INT_MASK); /* just for debug */
4596 iwl3945_write32(priv, CSR_INT_MASK, 0x00000000);
4598 /* Discover which interrupts are active/pending */
4599 inta = iwl3945_read32(priv, CSR_INT);
4600 inta_fh = iwl3945_read32(priv, CSR_FH_INT_STATUS);
4602 /* Ignore interrupt if there's nothing in NIC to service.
4603 * This may be due to IRQ shared with another device,
4604 * or due to sporadic interrupts thrown from our NIC. */
4605 if (!inta && !inta_fh) {
4606 IWL_DEBUG_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n");
4610 if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
4611 /* Hardware disappeared */
4612 IWL_WARNING("HARDWARE GONE?? INTA == 0x%080x\n", inta);
4616 IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
4617 inta, inta_mask, inta_fh);
4619 inta &= ~CSR_INT_BIT_SCD;
4621 /* iwl3945_irq_tasklet() will service interrupts and re-enable them */
4622 if (likely(inta || inta_fh))
4623 tasklet_schedule(&priv->irq_tasklet);
4625 spin_unlock(&priv->lock);
4630 /* re-enable interrupts here since we don't have anything to service. */
4631 /* only Re-enable if disabled by irq */
4632 if (test_bit(STATUS_INT_ENABLED, &priv->status))
4633 iwl3945_enable_interrupts(priv);
4634 spin_unlock(&priv->lock);
4638 /************************** EEPROM BANDS ****************************
4640 * The iwl3945_eeprom_band definitions below provide the mapping from the
4641 * EEPROM contents to the specific channel number supported for each
4644 * For example, iwl3945_priv->eeprom.band_3_channels[4] from the band_3
4645 * definition below maps to physical channel 42 in the 5.2GHz spectrum.
4646 * The specific geography and calibration information for that channel
4647 * is contained in the eeprom map itself.
4649 * During init, we copy the eeprom information and channel map
4650 * information into priv->channel_info_24/52 and priv->channel_map_24/52
4652 * channel_map_24/52 provides the index in the channel_info array for a
4653 * given channel. We have to have two separate maps as there is channel
4654 * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
4657 * A value of 0xff stored in the channel_map indicates that the channel
4658 * is not supported by the hardware at all.
4660 * A value of 0xfe in the channel_map indicates that the channel is not
4661 * valid for Tx with the current hardware. This means that
4662 * while the system can tune and receive on a given channel, it may not
4663 * be able to associate or transmit any frames on that
4664 * channel. There is no corresponding channel information for that
4667 *********************************************************************/
4670 static const u8 iwl3945_eeprom_band_1[14] = {
4671 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
4675 static const u8 iwl3945_eeprom_band_2[] = { /* 4915-5080MHz */
4676 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
4679 static const u8 iwl3945_eeprom_band_3[] = { /* 5170-5320MHz */
4680 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
4683 static const u8 iwl3945_eeprom_band_4[] = { /* 5500-5700MHz */
4684 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
4687 static const u8 iwl3945_eeprom_band_5[] = { /* 5725-5825MHz */
4688 145, 149, 153, 157, 161, 165
4691 static void iwl3945_init_band_reference(const struct iwl3945_priv *priv, int band,
4692 int *eeprom_ch_count,
4693 const struct iwl3945_eeprom_channel
4695 const u8 **eeprom_ch_index)
4698 case 1: /* 2.4GHz band */
4699 *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_1);
4700 *eeprom_ch_info = priv->eeprom.band_1_channels;
4701 *eeprom_ch_index = iwl3945_eeprom_band_1;
4703 case 2: /* 4.9GHz band */
4704 *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_2);
4705 *eeprom_ch_info = priv->eeprom.band_2_channels;
4706 *eeprom_ch_index = iwl3945_eeprom_band_2;
4708 case 3: /* 5.2GHz band */
4709 *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_3);
4710 *eeprom_ch_info = priv->eeprom.band_3_channels;
4711 *eeprom_ch_index = iwl3945_eeprom_band_3;
4713 case 4: /* 5.5GHz band */
4714 *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_4);
4715 *eeprom_ch_info = priv->eeprom.band_4_channels;
4716 *eeprom_ch_index = iwl3945_eeprom_band_4;
4718 case 5: /* 5.7GHz band */
4719 *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_5);
4720 *eeprom_ch_info = priv->eeprom.band_5_channels;
4721 *eeprom_ch_index = iwl3945_eeprom_band_5;
4730 * iwl3945_get_channel_info - Find driver's private channel info
4732 * Based on band and channel number.
4734 const struct iwl3945_channel_info *iwl3945_get_channel_info(const struct iwl3945_priv *priv,
4735 enum ieee80211_band band, u16 channel)
4740 case IEEE80211_BAND_5GHZ:
4741 for (i = 14; i < priv->channel_count; i++) {
4742 if (priv->channel_info[i].channel == channel)
4743 return &priv->channel_info[i];
4747 case IEEE80211_BAND_2GHZ:
4748 if (channel >= 1 && channel <= 14)
4749 return &priv->channel_info[channel - 1];
4751 case IEEE80211_NUM_BANDS:
4758 #define CHECK_AND_PRINT(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
4762 * iwl3945_init_channel_map - Set up driver's info for all possible channels
4764 static int iwl3945_init_channel_map(struct iwl3945_priv *priv)
4766 int eeprom_ch_count = 0;
4767 const u8 *eeprom_ch_index = NULL;
4768 const struct iwl3945_eeprom_channel *eeprom_ch_info = NULL;
4770 struct iwl3945_channel_info *ch_info;
4772 if (priv->channel_count) {
4773 IWL_DEBUG_INFO("Channel map already initialized.\n");
4777 if (priv->eeprom.version < 0x2f) {
4778 IWL_WARNING("Unsupported EEPROM version: 0x%04X\n",
4779 priv->eeprom.version);
4783 IWL_DEBUG_INFO("Initializing regulatory info from EEPROM\n");
4785 priv->channel_count =
4786 ARRAY_SIZE(iwl3945_eeprom_band_1) +
4787 ARRAY_SIZE(iwl3945_eeprom_band_2) +
4788 ARRAY_SIZE(iwl3945_eeprom_band_3) +
4789 ARRAY_SIZE(iwl3945_eeprom_band_4) +
4790 ARRAY_SIZE(iwl3945_eeprom_band_5);
4792 IWL_DEBUG_INFO("Parsing data for %d channels.\n", priv->channel_count);
4794 priv->channel_info = kzalloc(sizeof(struct iwl3945_channel_info) *
4795 priv->channel_count, GFP_KERNEL);
4796 if (!priv->channel_info) {
4797 IWL_ERROR("Could not allocate channel_info\n");
4798 priv->channel_count = 0;
4802 ch_info = priv->channel_info;
4804 /* Loop through the 5 EEPROM bands adding them in order to the
4805 * channel map we maintain (that contains additional information than
4806 * what just in the EEPROM) */
4807 for (band = 1; band <= 5; band++) {
4809 iwl3945_init_band_reference(priv, band, &eeprom_ch_count,
4810 &eeprom_ch_info, &eeprom_ch_index);
4812 /* Loop through each band adding each of the channels */
4813 for (ch = 0; ch < eeprom_ch_count; ch++) {
4814 ch_info->channel = eeprom_ch_index[ch];
4815 ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ :
4816 IEEE80211_BAND_5GHZ;
4818 /* permanently store EEPROM's channel regulatory flags
4819 * and max power in channel info database. */
4820 ch_info->eeprom = eeprom_ch_info[ch];
4822 /* Copy the run-time flags so they are there even on
4823 * invalid channels */
4824 ch_info->flags = eeprom_ch_info[ch].flags;
4826 if (!(is_channel_valid(ch_info))) {
4827 IWL_DEBUG_INFO("Ch. %d Flags %x [%sGHz] - "
4831 is_channel_a_band(ch_info) ?
4837 /* Initialize regulatory-based run-time data */
4838 ch_info->max_power_avg = ch_info->curr_txpow =
4839 eeprom_ch_info[ch].max_power_avg;
4840 ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
4841 ch_info->min_power = 0;
4843 IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s%s(0x%02x"
4844 " %ddBm): Ad-Hoc %ssupported\n",
4846 is_channel_a_band(ch_info) ?
4848 CHECK_AND_PRINT(VALID),
4849 CHECK_AND_PRINT(IBSS),
4850 CHECK_AND_PRINT(ACTIVE),
4851 CHECK_AND_PRINT(RADAR),
4852 CHECK_AND_PRINT(WIDE),
4853 CHECK_AND_PRINT(NARROW),
4854 CHECK_AND_PRINT(DFS),
4855 eeprom_ch_info[ch].flags,
4856 eeprom_ch_info[ch].max_power_avg,
4857 ((eeprom_ch_info[ch].
4858 flags & EEPROM_CHANNEL_IBSS)
4859 && !(eeprom_ch_info[ch].
4860 flags & EEPROM_CHANNEL_RADAR))
4863 /* Set the user_txpower_limit to the highest power
4864 * supported by any channel */
4865 if (eeprom_ch_info[ch].max_power_avg >
4866 priv->user_txpower_limit)
4867 priv->user_txpower_limit =
4868 eeprom_ch_info[ch].max_power_avg;
4874 /* Set up txpower settings in driver for all channels */
4875 if (iwl3945_txpower_set_from_eeprom(priv))
4882 * iwl3945_free_channel_map - undo allocations in iwl3945_init_channel_map
4884 static void iwl3945_free_channel_map(struct iwl3945_priv *priv)
4886 kfree(priv->channel_info);
4887 priv->channel_count = 0;
4890 /* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
4891 * sending probe req. This should be set long enough to hear probe responses
4892 * from more than one AP. */
4893 #define IWL_ACTIVE_DWELL_TIME_24 (20) /* all times in msec */
4894 #define IWL_ACTIVE_DWELL_TIME_52 (10)
4896 /* For faster active scanning, scan will move to the next channel if fewer than
4897 * PLCP_QUIET_THRESH packets are heard on this channel within
4898 * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
4899 * time if it's a quiet channel (nothing responded to our probe, and there's
4900 * no other traffic).
4901 * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
4902 #define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */
4903 #define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(5) /* msec */
4905 /* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
4906 * Must be set longer than active dwell time.
4907 * For the most reliable scan, set > AP beacon interval (typically 100msec). */
4908 #define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
4909 #define IWL_PASSIVE_DWELL_TIME_52 (10)
4910 #define IWL_PASSIVE_DWELL_BASE (100)
4911 #define IWL_CHANNEL_TUNE_TIME 5
4913 static inline u16 iwl3945_get_active_dwell_time(struct iwl3945_priv *priv,
4914 enum ieee80211_band band)
4916 if (band == IEEE80211_BAND_5GHZ)
4917 return IWL_ACTIVE_DWELL_TIME_52;
4919 return IWL_ACTIVE_DWELL_TIME_24;
4922 static u16 iwl3945_get_passive_dwell_time(struct iwl3945_priv *priv,
4923 enum ieee80211_band band)
4925 u16 active = iwl3945_get_active_dwell_time(priv, band);
4926 u16 passive = (band == IEEE80211_BAND_2GHZ) ?
4927 IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
4928 IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
4930 if (iwl3945_is_associated(priv)) {
4931 /* If we're associated, we clamp the maximum passive
4932 * dwell time to be 98% of the beacon interval (minus
4933 * 2 * channel tune time) */
4934 passive = priv->beacon_int;
4935 if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive)
4936 passive = IWL_PASSIVE_DWELL_BASE;
4937 passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
4940 if (passive <= active)
4941 passive = active + 1;
4946 static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv,
4947 enum ieee80211_band band,
4948 u8 is_active, u8 direct_mask,
4949 struct iwl3945_scan_channel *scan_ch)
4951 const struct ieee80211_channel *channels = NULL;
4952 const struct ieee80211_supported_band *sband;
4953 const struct iwl3945_channel_info *ch_info;
4954 u16 passive_dwell = 0;
4955 u16 active_dwell = 0;
4958 sband = iwl3945_get_band(priv, band);
4962 channels = sband->channels;
4964 active_dwell = iwl3945_get_active_dwell_time(priv, band);
4965 passive_dwell = iwl3945_get_passive_dwell_time(priv, band);
4967 for (i = 0, added = 0; i < sband->n_channels; i++) {
4968 if (channels[i].flags & IEEE80211_CHAN_DISABLED)
4971 if (channels[i].hw_value ==
4972 le16_to_cpu(priv->active_rxon.channel)) {
4973 if (iwl3945_is_associated(priv)) {
4975 ("Skipping current channel %d\n",
4976 le16_to_cpu(priv->active_rxon.channel));
4979 } else if (priv->only_active_channel)
4982 scan_ch->channel = channels[i].hw_value;
4984 ch_info = iwl3945_get_channel_info(priv, band, scan_ch->channel);
4985 if (!is_channel_valid(ch_info)) {
4986 IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
4991 if (!is_active || is_channel_passive(ch_info) ||
4992 (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN))
4993 scan_ch->type = 0; /* passive */
4995 scan_ch->type = 1; /* active */
4997 if (scan_ch->type & 1)
4998 scan_ch->type |= (direct_mask << 1);
5000 if (is_channel_narrow(ch_info))
5001 scan_ch->type |= (1 << 7);
5003 scan_ch->active_dwell = cpu_to_le16(active_dwell);
5004 scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
5006 /* Set txpower levels to defaults */
5007 scan_ch->tpc.dsp_atten = 110;
5008 /* scan_pwr_info->tpc.dsp_atten; */
5010 /*scan_pwr_info->tpc.tx_gain; */
5011 if (band == IEEE80211_BAND_5GHZ)
5012 scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
5014 scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
5015 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
5017 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
5021 IWL_DEBUG_SCAN("Scanning %d [%s %d]\n",
5023 (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
5024 (scan_ch->type & 1) ?
5025 active_dwell : passive_dwell);
5031 IWL_DEBUG_SCAN("total channels to scan %d \n", added);
5035 static void iwl3945_init_hw_rates(struct iwl3945_priv *priv,
5036 struct ieee80211_rate *rates)
5040 for (i = 0; i < IWL_RATE_COUNT; i++) {
5041 rates[i].bitrate = iwl3945_rates[i].ieee * 5;
5042 rates[i].hw_value = i; /* Rate scaling will work on indexes */
5043 rates[i].hw_value_short = i;
5045 if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
5047 * If CCK != 1M then set short preamble rate flag.
5049 rates[i].flags |= (iwl3945_rates[i].plcp == 10) ?
5050 0 : IEEE80211_RATE_SHORT_PREAMBLE;
5056 * iwl3945_init_geos - Initialize mac80211's geo/channel info based from eeprom
5058 static int iwl3945_init_geos(struct iwl3945_priv *priv)
5060 struct iwl3945_channel_info *ch;
5061 struct ieee80211_supported_band *sband;
5062 struct ieee80211_channel *channels;
5063 struct ieee80211_channel *geo_ch;
5064 struct ieee80211_rate *rates;
5067 if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
5068 priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
5069 IWL_DEBUG_INFO("Geography modes already initialized.\n");
5070 set_bit(STATUS_GEO_CONFIGURED, &priv->status);
5074 channels = kzalloc(sizeof(struct ieee80211_channel) *
5075 priv->channel_count, GFP_KERNEL);
5079 rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
5086 /* 5.2GHz channels start after the 2.4GHz channels */
5087 sband = &priv->bands[IEEE80211_BAND_5GHZ];
5088 sband->channels = &channels[ARRAY_SIZE(iwl3945_eeprom_band_1)];
5090 sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
5091 sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
5093 sband = &priv->bands[IEEE80211_BAND_2GHZ];
5094 sband->channels = channels;
5096 sband->bitrates = rates;
5097 sband->n_bitrates = IWL_RATE_COUNT;
5099 priv->ieee_channels = channels;
5100 priv->ieee_rates = rates;
5102 iwl3945_init_hw_rates(priv, rates);
5104 for (i = 0; i < priv->channel_count; i++) {
5105 ch = &priv->channel_info[i];
5107 /* FIXME: might be removed if scan is OK*/
5108 if (!is_channel_valid(ch))
5111 if (is_channel_a_band(ch))
5112 sband = &priv->bands[IEEE80211_BAND_5GHZ];
5114 sband = &priv->bands[IEEE80211_BAND_2GHZ];
5116 geo_ch = &sband->channels[sband->n_channels++];
5118 geo_ch->center_freq = ieee80211_channel_to_frequency(ch->channel);
5119 geo_ch->max_power = ch->max_power_avg;
5120 geo_ch->max_antenna_gain = 0xff;
5121 geo_ch->hw_value = ch->channel;
5123 if (is_channel_valid(ch)) {
5124 if (!(ch->flags & EEPROM_CHANNEL_IBSS))
5125 geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
5127 if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
5128 geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
5130 if (ch->flags & EEPROM_CHANNEL_RADAR)
5131 geo_ch->flags |= IEEE80211_CHAN_RADAR;
5133 if (ch->max_power_avg > priv->max_channel_txpower_limit)
5134 priv->max_channel_txpower_limit =
5137 geo_ch->flags |= IEEE80211_CHAN_DISABLED;
5140 /* Save flags for reg domain usage */
5141 geo_ch->orig_flags = geo_ch->flags;
5143 IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0%X\n",
5144 ch->channel, geo_ch->center_freq,
5145 is_channel_a_band(ch) ? "5.2" : "2.4",
5146 geo_ch->flags & IEEE80211_CHAN_DISABLED ?
5147 "restricted" : "valid",
5151 if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
5152 priv->cfg->sku & IWL_SKU_A) {
5153 printk(KERN_INFO DRV_NAME
5154 ": Incorrectly detected BG card as ABG. Please send "
5155 "your PCI ID 0x%04X:0x%04X to maintainer.\n",
5156 priv->pci_dev->device, priv->pci_dev->subsystem_device);
5157 priv->cfg->sku &= ~IWL_SKU_A;
5160 printk(KERN_INFO DRV_NAME
5161 ": Tunable channels: %d 802.11bg, %d 802.11a channels\n",
5162 priv->bands[IEEE80211_BAND_2GHZ].n_channels,
5163 priv->bands[IEEE80211_BAND_5GHZ].n_channels);
5165 if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
5166 priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
5167 &priv->bands[IEEE80211_BAND_2GHZ];
5168 if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
5169 priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
5170 &priv->bands[IEEE80211_BAND_5GHZ];
5172 set_bit(STATUS_GEO_CONFIGURED, &priv->status);
5178 * iwl3945_free_geos - undo allocations in iwl3945_init_geos
5180 static void iwl3945_free_geos(struct iwl3945_priv *priv)
5182 kfree(priv->ieee_channels);
5183 kfree(priv->ieee_rates);
5184 clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
5187 /******************************************************************************
5189 * uCode download functions
5191 ******************************************************************************/
5193 static void iwl3945_dealloc_ucode_pci(struct iwl3945_priv *priv)
5195 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
5196 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
5197 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
5198 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
5199 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
5200 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
5204 * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host,
5205 * looking at all data.
5207 static int iwl3945_verify_inst_full(struct iwl3945_priv *priv, __le32 * image, u32 len)
5214 IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
5216 rc = iwl3945_grab_nic_access(priv);
5220 iwl3945_write_direct32(priv, HBUS_TARG_MEM_RADDR, RTC_INST_LOWER_BOUND);
5223 for (; len > 0; len -= sizeof(u32), image++) {
5224 /* read data comes through single port, auto-incr addr */
5225 /* NOTE: Use the debugless read so we don't flood kernel log
5226 * if IWL_DL_IO is set */
5227 val = _iwl3945_read_direct32(priv, HBUS_TARG_MEM_RDAT);
5228 if (val != le32_to_cpu(*image)) {
5229 IWL_ERROR("uCode INST section is invalid at "
5230 "offset 0x%x, is 0x%x, s/b 0x%x\n",
5231 save_len - len, val, le32_to_cpu(*image));
5239 iwl3945_release_nic_access(priv);
5242 IWL_DEBUG_INFO("ucode image in INSTRUCTION memory is good\n");
5249 * iwl3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
5250 * using sample data 100 bytes apart. If these sample points are good,
5251 * it's a pretty good bet that everything between them is good, too.
5253 static int iwl3945_verify_inst_sparse(struct iwl3945_priv *priv, __le32 *image, u32 len)
5260 IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
5262 rc = iwl3945_grab_nic_access(priv);
5266 for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
5267 /* read data comes through single port, auto-incr addr */
5268 /* NOTE: Use the debugless read so we don't flood kernel log
5269 * if IWL_DL_IO is set */
5270 iwl3945_write_direct32(priv, HBUS_TARG_MEM_RADDR,
5271 i + RTC_INST_LOWER_BOUND);
5272 val = _iwl3945_read_direct32(priv, HBUS_TARG_MEM_RDAT);
5273 if (val != le32_to_cpu(*image)) {
5274 #if 0 /* Enable this if you want to see details */
5275 IWL_ERROR("uCode INST section is invalid at "
5276 "offset 0x%x, is 0x%x, s/b 0x%x\n",
5286 iwl3945_release_nic_access(priv);
5293 * iwl3945_verify_ucode - determine which instruction image is in SRAM,
5294 * and verify its contents
5296 static int iwl3945_verify_ucode(struct iwl3945_priv *priv)
5303 image = (__le32 *)priv->ucode_boot.v_addr;
5304 len = priv->ucode_boot.len;
5305 rc = iwl3945_verify_inst_sparse(priv, image, len);
5307 IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
5311 /* Try initialize */
5312 image = (__le32 *)priv->ucode_init.v_addr;
5313 len = priv->ucode_init.len;
5314 rc = iwl3945_verify_inst_sparse(priv, image, len);
5316 IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
5320 /* Try runtime/protocol */
5321 image = (__le32 *)priv->ucode_code.v_addr;
5322 len = priv->ucode_code.len;
5323 rc = iwl3945_verify_inst_sparse(priv, image, len);
5325 IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
5329 IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
5331 /* Since nothing seems to match, show first several data entries in
5332 * instruction SRAM, so maybe visual inspection will give a clue.
5333 * Selection of bootstrap image (vs. other images) is arbitrary. */
5334 image = (__le32 *)priv->ucode_boot.v_addr;
5335 len = priv->ucode_boot.len;
5336 rc = iwl3945_verify_inst_full(priv, image, len);
5342 /* check contents of special bootstrap uCode SRAM */
5343 static int iwl3945_verify_bsm(struct iwl3945_priv *priv)
5345 __le32 *image = priv->ucode_boot.v_addr;
5346 u32 len = priv->ucode_boot.len;
5350 IWL_DEBUG_INFO("Begin verify bsm\n");
5352 /* verify BSM SRAM contents */
5353 val = iwl3945_read_prph(priv, BSM_WR_DWCOUNT_REG);
5354 for (reg = BSM_SRAM_LOWER_BOUND;
5355 reg < BSM_SRAM_LOWER_BOUND + len;
5356 reg += sizeof(u32), image ++) {
5357 val = iwl3945_read_prph(priv, reg);
5358 if (val != le32_to_cpu(*image)) {
5359 IWL_ERROR("BSM uCode verification failed at "
5360 "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
5361 BSM_SRAM_LOWER_BOUND,
5362 reg - BSM_SRAM_LOWER_BOUND, len,
5363 val, le32_to_cpu(*image));
5368 IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n");
5374 * iwl3945_load_bsm - Load bootstrap instructions
5378 * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
5379 * in special SRAM that does not power down during RFKILL. When powering back
5380 * up after power-saving sleeps (or during initial uCode load), the BSM loads
5381 * the bootstrap program into the on-board processor, and starts it.
5383 * The bootstrap program loads (via DMA) instructions and data for a new
5384 * program from host DRAM locations indicated by the host driver in the
5385 * BSM_DRAM_* registers. Once the new program is loaded, it starts
5388 * When initializing the NIC, the host driver points the BSM to the
5389 * "initialize" uCode image. This uCode sets up some internal data, then
5390 * notifies host via "initialize alive" that it is complete.
5392 * The host then replaces the BSM_DRAM_* pointer values to point to the
5393 * normal runtime uCode instructions and a backup uCode data cache buffer
5394 * (filled initially with starting data values for the on-board processor),
5395 * then triggers the "initialize" uCode to load and launch the runtime uCode,
5396 * which begins normal operation.
5398 * When doing a power-save shutdown, runtime uCode saves data SRAM into
5399 * the backup data cache in DRAM before SRAM is powered down.
5401 * When powering back up, the BSM loads the bootstrap program. This reloads
5402 * the runtime uCode instructions and the backup data cache into SRAM,
5403 * and re-launches the runtime uCode from where it left off.
5405 static int iwl3945_load_bsm(struct iwl3945_priv *priv)
5407 __le32 *image = priv->ucode_boot.v_addr;
5408 u32 len = priv->ucode_boot.len;
5418 IWL_DEBUG_INFO("Begin load bsm\n");
5420 /* make sure bootstrap program is no larger than BSM's SRAM size */
5421 if (len > IWL_MAX_BSM_SIZE)
5424 /* Tell bootstrap uCode where to find the "Initialize" uCode
5425 * in host DRAM ... host DRAM physical address bits 31:0 for 3945.
5426 * NOTE: iwl3945_initialize_alive_start() will replace these values,
5427 * after the "initialize" uCode has run, to point to
5428 * runtime/protocol instructions and backup data cache. */
5429 pinst = priv->ucode_init.p_addr;
5430 pdata = priv->ucode_init_data.p_addr;
5431 inst_len = priv->ucode_init.len;
5432 data_len = priv->ucode_init_data.len;
5434 rc = iwl3945_grab_nic_access(priv);
5438 iwl3945_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
5439 iwl3945_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
5440 iwl3945_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
5441 iwl3945_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
5443 /* Fill BSM memory with bootstrap instructions */
5444 for (reg_offset = BSM_SRAM_LOWER_BOUND;
5445 reg_offset < BSM_SRAM_LOWER_BOUND + len;
5446 reg_offset += sizeof(u32), image++)
5447 _iwl3945_write_prph(priv, reg_offset,
5448 le32_to_cpu(*image));
5450 rc = iwl3945_verify_bsm(priv);
5452 iwl3945_release_nic_access(priv);
5456 /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
5457 iwl3945_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
5458 iwl3945_write_prph(priv, BSM_WR_MEM_DST_REG,
5459 RTC_INST_LOWER_BOUND);
5460 iwl3945_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
5462 /* Load bootstrap code into instruction SRAM now,
5463 * to prepare to load "initialize" uCode */
5464 iwl3945_write_prph(priv, BSM_WR_CTRL_REG,
5465 BSM_WR_CTRL_REG_BIT_START);
5467 /* Wait for load of bootstrap uCode to finish */
5468 for (i = 0; i < 100; i++) {
5469 done = iwl3945_read_prph(priv, BSM_WR_CTRL_REG);
5470 if (!(done & BSM_WR_CTRL_REG_BIT_START))
5475 IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i);
5477 IWL_ERROR("BSM write did not complete!\n");
5481 /* Enable future boot loads whenever power management unit triggers it
5482 * (e.g. when powering back up after power-save shutdown) */
5483 iwl3945_write_prph(priv, BSM_WR_CTRL_REG,
5484 BSM_WR_CTRL_REG_BIT_START_EN);
5486 iwl3945_release_nic_access(priv);
5491 static void iwl3945_nic_start(struct iwl3945_priv *priv)
5493 /* Remove all resets to allow NIC to operate */
5494 iwl3945_write32(priv, CSR_RESET, 0);
5498 * iwl3945_read_ucode - Read uCode images from disk file.
5500 * Copy into buffers for card to fetch via bus-mastering
5502 static int iwl3945_read_ucode(struct iwl3945_priv *priv)
5504 struct iwl3945_ucode *ucode;
5506 const struct firmware *ucode_raw;
5507 /* firmware file name contains uCode/driver compatibility version */
5508 const char *name = priv->cfg->fw_name;
5511 u32 ver, inst_size, data_size, init_size, init_data_size, boot_size;
5513 /* Ask kernel firmware_class module to get the boot firmware off disk.
5514 * request_firmware() is synchronous, file is in memory on return. */
5515 ret = request_firmware(&ucode_raw, name, &priv->pci_dev->dev);
5517 IWL_ERROR("%s firmware file req failed: Reason %d\n",
5522 IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n",
5523 name, ucode_raw->size);
5525 /* Make sure that we got at least our header! */
5526 if (ucode_raw->size < sizeof(*ucode)) {
5527 IWL_ERROR("File size way too small!\n");
5532 /* Data from ucode file: header followed by uCode images */
5533 ucode = (void *)ucode_raw->data;
5535 ver = le32_to_cpu(ucode->ver);
5536 inst_size = le32_to_cpu(ucode->inst_size);
5537 data_size = le32_to_cpu(ucode->data_size);
5538 init_size = le32_to_cpu(ucode->init_size);
5539 init_data_size = le32_to_cpu(ucode->init_data_size);
5540 boot_size = le32_to_cpu(ucode->boot_size);
5542 IWL_DEBUG_INFO("f/w package hdr ucode version = 0x%x\n", ver);
5543 IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n", inst_size);
5544 IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n", data_size);
5545 IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n", init_size);
5546 IWL_DEBUG_INFO("f/w package hdr init data size = %u\n", init_data_size);
5547 IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n", boot_size);
5549 /* Verify size of file vs. image size info in file's header */
5550 if (ucode_raw->size < sizeof(*ucode) +
5551 inst_size + data_size + init_size +
5552 init_data_size + boot_size) {
5554 IWL_DEBUG_INFO("uCode file size %d too small\n",
5555 (int)ucode_raw->size);
5560 /* Verify that uCode images will fit in card's SRAM */
5561 if (inst_size > IWL_MAX_INST_SIZE) {
5562 IWL_DEBUG_INFO("uCode instr len %d too large to fit in\n",
5568 if (data_size > IWL_MAX_DATA_SIZE) {
5569 IWL_DEBUG_INFO("uCode data len %d too large to fit in\n",
5574 if (init_size > IWL_MAX_INST_SIZE) {
5575 IWL_DEBUG_INFO("uCode init instr len %d too large to fit in\n",
5580 if (init_data_size > IWL_MAX_DATA_SIZE) {
5581 IWL_DEBUG_INFO("uCode init data len %d too large to fit in\n",
5586 if (boot_size > IWL_MAX_BSM_SIZE) {
5587 IWL_DEBUG_INFO("uCode boot instr len %d too large to fit in\n",
5593 /* Allocate ucode buffers for card's bus-master loading ... */
5595 /* Runtime instructions and 2 copies of data:
5596 * 1) unmodified from disk
5597 * 2) backup cache for save/restore during power-downs */
5598 priv->ucode_code.len = inst_size;
5599 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
5601 priv->ucode_data.len = data_size;
5602 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
5604 priv->ucode_data_backup.len = data_size;
5605 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
5607 if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
5608 !priv->ucode_data_backup.v_addr)
5611 /* Initialization instructions and data */
5612 if (init_size && init_data_size) {
5613 priv->ucode_init.len = init_size;
5614 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
5616 priv->ucode_init_data.len = init_data_size;
5617 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
5619 if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
5623 /* Bootstrap (instructions only, no data) */
5625 priv->ucode_boot.len = boot_size;
5626 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
5628 if (!priv->ucode_boot.v_addr)
5632 /* Copy images into buffers for card's bus-master reads ... */
5634 /* Runtime instructions (first block of data in file) */
5635 src = &ucode->data[0];
5636 len = priv->ucode_code.len;
5637 IWL_DEBUG_INFO("Copying (but not loading) uCode instr len %Zd\n", len);
5638 memcpy(priv->ucode_code.v_addr, src, len);
5639 IWL_DEBUG_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
5640 priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
5642 /* Runtime data (2nd block)
5643 * NOTE: Copy into backup buffer will be done in iwl3945_up() */
5644 src = &ucode->data[inst_size];
5645 len = priv->ucode_data.len;
5646 IWL_DEBUG_INFO("Copying (but not loading) uCode data len %Zd\n", len);
5647 memcpy(priv->ucode_data.v_addr, src, len);
5648 memcpy(priv->ucode_data_backup.v_addr, src, len);
5650 /* Initialization instructions (3rd block) */
5652 src = &ucode->data[inst_size + data_size];
5653 len = priv->ucode_init.len;
5654 IWL_DEBUG_INFO("Copying (but not loading) init instr len %Zd\n",
5656 memcpy(priv->ucode_init.v_addr, src, len);
5659 /* Initialization data (4th block) */
5660 if (init_data_size) {
5661 src = &ucode->data[inst_size + data_size + init_size];
5662 len = priv->ucode_init_data.len;
5663 IWL_DEBUG_INFO("Copying (but not loading) init data len %d\n",
5665 memcpy(priv->ucode_init_data.v_addr, src, len);
5668 /* Bootstrap instructions (5th block) */
5669 src = &ucode->data[inst_size + data_size + init_size + init_data_size];
5670 len = priv->ucode_boot.len;
5671 IWL_DEBUG_INFO("Copying (but not loading) boot instr len %d\n",
5673 memcpy(priv->ucode_boot.v_addr, src, len);
5675 /* We have our copies now, allow OS release its copies */
5676 release_firmware(ucode_raw);
5680 IWL_ERROR("failed to allocate pci memory\n");
5682 iwl3945_dealloc_ucode_pci(priv);
5685 release_firmware(ucode_raw);
5693 * iwl3945_set_ucode_ptrs - Set uCode address location
5695 * Tell initialization uCode where to find runtime uCode.
5697 * BSM registers initially contain pointers to initialization uCode.
5698 * We need to replace them to load runtime uCode inst and data,
5699 * and to save runtime data when powering down.
5701 static int iwl3945_set_ucode_ptrs(struct iwl3945_priv *priv)
5706 unsigned long flags;
5708 /* bits 31:0 for 3945 */
5709 pinst = priv->ucode_code.p_addr;
5710 pdata = priv->ucode_data_backup.p_addr;
5712 spin_lock_irqsave(&priv->lock, flags);
5713 rc = iwl3945_grab_nic_access(priv);
5715 spin_unlock_irqrestore(&priv->lock, flags);
5719 /* Tell bootstrap uCode where to find image to load */
5720 iwl3945_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
5721 iwl3945_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
5722 iwl3945_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
5723 priv->ucode_data.len);
5725 /* Inst bytecount must be last to set up, bit 31 signals uCode
5726 * that all new ptr/size info is in place */
5727 iwl3945_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
5728 priv->ucode_code.len | BSM_DRAM_INST_LOAD);
5730 iwl3945_release_nic_access(priv);
5732 spin_unlock_irqrestore(&priv->lock, flags);
5734 IWL_DEBUG_INFO("Runtime uCode pointers are set.\n");
5740 * iwl3945_init_alive_start - Called after REPLY_ALIVE notification received
5742 * Called after REPLY_ALIVE notification received from "initialize" uCode.
5744 * Tell "initialize" uCode to go ahead and load the runtime uCode.
5746 static void iwl3945_init_alive_start(struct iwl3945_priv *priv)
5748 /* Check alive response for "valid" sign from uCode */
5749 if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
5750 /* We had an error bringing up the hardware, so take it
5751 * all the way back down so we can try again */
5752 IWL_DEBUG_INFO("Initialize Alive failed.\n");
5756 /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
5757 * This is a paranoid check, because we would not have gotten the
5758 * "initialize" alive if code weren't properly loaded. */
5759 if (iwl3945_verify_ucode(priv)) {
5760 /* Runtime instruction load was bad;
5761 * take it all the way back down so we can try again */
5762 IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
5766 /* Send pointers to protocol/runtime uCode image ... init code will
5767 * load and launch runtime uCode, which will send us another "Alive"
5769 IWL_DEBUG_INFO("Initialization Alive received.\n");
5770 if (iwl3945_set_ucode_ptrs(priv)) {
5771 /* Runtime instruction load won't happen;
5772 * take it all the way back down so we can try again */
5773 IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n");
5779 queue_work(priv->workqueue, &priv->restart);
5784 * iwl3945_alive_start - called after REPLY_ALIVE notification received
5785 * from protocol/runtime uCode (initialization uCode's
5786 * Alive gets handled by iwl3945_init_alive_start()).
5788 static void iwl3945_alive_start(struct iwl3945_priv *priv)
5791 int thermal_spin = 0;
5794 IWL_DEBUG_INFO("Runtime Alive received.\n");
5796 if (priv->card_alive.is_valid != UCODE_VALID_OK) {
5797 /* We had an error bringing up the hardware, so take it
5798 * all the way back down so we can try again */
5799 IWL_DEBUG_INFO("Alive failed.\n");
5803 /* Initialize uCode has loaded Runtime uCode ... verify inst image.
5804 * This is a paranoid check, because we would not have gotten the
5805 * "runtime" alive if code weren't properly loaded. */
5806 if (iwl3945_verify_ucode(priv)) {
5807 /* Runtime instruction load was bad;
5808 * take it all the way back down so we can try again */
5809 IWL_DEBUG_INFO("Bad runtime uCode load.\n");
5813 iwl3945_clear_stations_table(priv);
5815 rc = iwl3945_grab_nic_access(priv);
5817 IWL_WARNING("Can not read rfkill status from adapter\n");
5821 rfkill = iwl3945_read_prph(priv, APMG_RFKILL_REG);
5822 IWL_DEBUG_INFO("RFKILL status: 0x%x\n", rfkill);
5823 iwl3945_release_nic_access(priv);
5826 clear_bit(STATUS_RF_KILL_HW, &priv->status);
5827 /* if rfkill is not on, then wait for thermal
5828 * sensor in adapter to kick in */
5829 while (iwl3945_hw_get_temperature(priv) == 0) {
5835 IWL_DEBUG_INFO("Thermal calibration took %dus\n",
5838 set_bit(STATUS_RF_KILL_HW, &priv->status);
5840 /* After the ALIVE response, we can send commands to 3945 uCode */
5841 set_bit(STATUS_ALIVE, &priv->status);
5843 /* Clear out the uCode error bit if it is set */
5844 clear_bit(STATUS_FW_ERROR, &priv->status);
5846 if (iwl3945_is_rfkill(priv))
5849 ieee80211_start_queues(priv->hw);
5851 priv->active_rate = priv->rates_mask;
5852 priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
5854 iwl3945_send_power_mode(priv, IWL_POWER_LEVEL(priv->power_mode));
5856 if (iwl3945_is_associated(priv)) {
5857 struct iwl3945_rxon_cmd *active_rxon =
5858 (struct iwl3945_rxon_cmd *)(&priv->active_rxon);
5860 memcpy(&priv->staging_rxon, &priv->active_rxon,
5861 sizeof(priv->staging_rxon));
5862 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
5864 /* Initialize our rx_config data */
5865 iwl3945_connection_init_rx_config(priv);
5866 memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
5869 /* Configure Bluetooth device coexistence support */
5870 iwl3945_send_bt_config(priv);
5872 /* Configure the adapter for unassociated operation */
5873 iwl3945_commit_rxon(priv);
5875 /* At this point, the NIC is initialized and operational */
5876 priv->notif_missed_beacons = 0;
5878 iwl3945_reg_txpower_periodic(priv);
5880 iwl3945_led_register(priv);
5882 IWL_DEBUG_INFO("ALIVE processing complete.\n");
5883 set_bit(STATUS_READY, &priv->status);
5884 wake_up_interruptible(&priv->wait_command_queue);
5886 if (priv->error_recovering)
5887 iwl3945_error_recovery(priv);
5889 ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
5893 queue_work(priv->workqueue, &priv->restart);
5896 static void iwl3945_cancel_deferred_work(struct iwl3945_priv *priv);
5898 static void __iwl3945_down(struct iwl3945_priv *priv)
5900 unsigned long flags;
5901 int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
5902 struct ieee80211_conf *conf = NULL;
5904 IWL_DEBUG_INFO(DRV_NAME " is going down\n");
5906 conf = ieee80211_get_hw_conf(priv->hw);
5909 set_bit(STATUS_EXIT_PENDING, &priv->status);
5911 iwl3945_led_unregister(priv);
5912 iwl3945_clear_stations_table(priv);
5914 /* Unblock any waiting calls */
5915 wake_up_interruptible_all(&priv->wait_command_queue);
5917 /* Wipe out the EXIT_PENDING status bit if we are not actually
5918 * exiting the module */
5920 clear_bit(STATUS_EXIT_PENDING, &priv->status);
5922 /* stop and reset the on-board processor */
5923 iwl3945_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
5925 /* tell the device to stop sending interrupts */
5926 spin_lock_irqsave(&priv->lock, flags);
5927 iwl3945_disable_interrupts(priv);
5928 spin_unlock_irqrestore(&priv->lock, flags);
5929 iwl_synchronize_irq(priv);
5931 if (priv->mac80211_registered)
5932 ieee80211_stop_queues(priv->hw);
5934 /* If we have not previously called iwl3945_init() then
5935 * clear all bits but the RF Kill and SUSPEND bits and return */
5936 if (!iwl3945_is_init(priv)) {
5937 priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
5939 test_bit(STATUS_RF_KILL_SW, &priv->status) <<
5941 test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
5942 STATUS_GEO_CONFIGURED |
5943 test_bit(STATUS_IN_SUSPEND, &priv->status) <<
5948 /* ...otherwise clear out all the status bits but the RF Kill and
5949 * SUSPEND bits and continue taking the NIC down. */
5950 priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
5952 test_bit(STATUS_RF_KILL_SW, &priv->status) <<
5954 test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
5955 STATUS_GEO_CONFIGURED |
5956 test_bit(STATUS_IN_SUSPEND, &priv->status) <<
5958 test_bit(STATUS_FW_ERROR, &priv->status) <<
5961 spin_lock_irqsave(&priv->lock, flags);
5962 iwl3945_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
5963 spin_unlock_irqrestore(&priv->lock, flags);
5965 iwl3945_hw_txq_ctx_stop(priv);
5966 iwl3945_hw_rxq_stop(priv);
5968 spin_lock_irqsave(&priv->lock, flags);
5969 if (!iwl3945_grab_nic_access(priv)) {
5970 iwl3945_write_prph(priv, APMG_CLK_DIS_REG,
5971 APMG_CLK_VAL_DMA_CLK_RQT);
5972 iwl3945_release_nic_access(priv);
5974 spin_unlock_irqrestore(&priv->lock, flags);
5978 iwl3945_hw_nic_stop_master(priv);
5979 iwl3945_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
5980 iwl3945_hw_nic_reset(priv);
5983 memset(&priv->card_alive, 0, sizeof(struct iwl3945_alive_resp));
5985 if (priv->ibss_beacon)
5986 dev_kfree_skb(priv->ibss_beacon);
5987 priv->ibss_beacon = NULL;
5989 /* clear out any free frames */
5990 iwl3945_clear_free_frames(priv);
5993 static void iwl3945_down(struct iwl3945_priv *priv)
5995 mutex_lock(&priv->mutex);
5996 __iwl3945_down(priv);
5997 mutex_unlock(&priv->mutex);
5999 iwl3945_cancel_deferred_work(priv);
6002 #define MAX_HW_RESTARTS 5
6004 static int __iwl3945_up(struct iwl3945_priv *priv)
6008 if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
6009 IWL_WARNING("Exit pending; will not bring the NIC up\n");
6013 if (test_bit(STATUS_RF_KILL_SW, &priv->status)) {
6014 IWL_WARNING("Radio disabled by SW RF kill (module "
6019 if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
6020 IWL_ERROR("ucode not available for device bringup\n");
6024 /* If platform's RF_KILL switch is NOT set to KILL */
6025 if (iwl3945_read32(priv, CSR_GP_CNTRL) &
6026 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
6027 clear_bit(STATUS_RF_KILL_HW, &priv->status);
6029 set_bit(STATUS_RF_KILL_HW, &priv->status);
6030 if (!test_bit(STATUS_IN_SUSPEND, &priv->status)) {
6031 IWL_WARNING("Radio disabled by HW RF Kill switch\n");
6036 iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF);
6038 rc = iwl3945_hw_nic_init(priv);
6040 IWL_ERROR("Unable to int nic\n");
6044 /* make sure rfkill handshake bits are cleared */
6045 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
6046 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR,
6047 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
6049 /* clear (again), then enable host interrupts */
6050 iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF);
6051 iwl3945_enable_interrupts(priv);
6053 /* really make sure rfkill handshake bits are cleared */
6054 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
6055 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
6057 /* Copy original ucode data image from disk into backup cache.
6058 * This will be used to initialize the on-board processor's
6059 * data SRAM for a clean start when the runtime program first loads. */
6060 memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
6061 priv->ucode_data.len);
6063 /* We return success when we resume from suspend and rf_kill is on. */
6064 if (test_bit(STATUS_RF_KILL_HW, &priv->status))
6067 for (i = 0; i < MAX_HW_RESTARTS; i++) {
6069 iwl3945_clear_stations_table(priv);
6071 /* load bootstrap state machine,
6072 * load bootstrap program into processor's memory,
6073 * prepare to load the "initialize" uCode */
6074 rc = iwl3945_load_bsm(priv);
6077 IWL_ERROR("Unable to set up bootstrap uCode: %d\n", rc);
6081 /* start card; "initialize" will load runtime ucode */
6082 iwl3945_nic_start(priv);
6084 IWL_DEBUG_INFO(DRV_NAME " is coming up\n");
6089 set_bit(STATUS_EXIT_PENDING, &priv->status);
6090 __iwl3945_down(priv);
6092 /* tried to restart and config the device for as long as our
6093 * patience could withstand */
6094 IWL_ERROR("Unable to initialize device after %d attempts.\n", i);
6099 /*****************************************************************************
6101 * Workqueue callbacks
6103 *****************************************************************************/
6105 static void iwl3945_bg_init_alive_start(struct work_struct *data)
6107 struct iwl3945_priv *priv =
6108 container_of(data, struct iwl3945_priv, init_alive_start.work);
6110 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6113 mutex_lock(&priv->mutex);
6114 iwl3945_init_alive_start(priv);
6115 mutex_unlock(&priv->mutex);
6118 static void iwl3945_bg_alive_start(struct work_struct *data)
6120 struct iwl3945_priv *priv =
6121 container_of(data, struct iwl3945_priv, alive_start.work);
6123 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6126 mutex_lock(&priv->mutex);
6127 iwl3945_alive_start(priv);
6128 mutex_unlock(&priv->mutex);
6131 static void iwl3945_bg_rf_kill(struct work_struct *work)
6133 struct iwl3945_priv *priv = container_of(work, struct iwl3945_priv, rf_kill);
6135 wake_up_interruptible(&priv->wait_command_queue);
6137 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6140 mutex_lock(&priv->mutex);
6142 if (!iwl3945_is_rfkill(priv)) {
6143 IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL,
6144 "HW and/or SW RF Kill no longer active, restarting "
6146 if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
6147 queue_work(priv->workqueue, &priv->restart);
6150 if (!test_bit(STATUS_RF_KILL_HW, &priv->status))
6151 IWL_DEBUG_RF_KILL("Can not turn radio back on - "
6152 "disabled by SW switch\n");
6154 IWL_WARNING("Radio Frequency Kill Switch is On:\n"
6155 "Kill switch must be turned off for "
6156 "wireless networking to work.\n");
6158 mutex_unlock(&priv->mutex);
6161 #define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
6163 static void iwl3945_bg_scan_check(struct work_struct *data)
6165 struct iwl3945_priv *priv =
6166 container_of(data, struct iwl3945_priv, scan_check.work);
6168 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6171 mutex_lock(&priv->mutex);
6172 if (test_bit(STATUS_SCANNING, &priv->status) ||
6173 test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
6174 IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN,
6175 "Scan completion watchdog resetting adapter (%dms)\n",
6176 jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
6178 if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
6179 iwl3945_send_scan_abort(priv);
6181 mutex_unlock(&priv->mutex);
6184 static void iwl3945_bg_request_scan(struct work_struct *data)
6186 struct iwl3945_priv *priv =
6187 container_of(data, struct iwl3945_priv, request_scan);
6188 struct iwl3945_host_cmd cmd = {
6189 .id = REPLY_SCAN_CMD,
6190 .len = sizeof(struct iwl3945_scan_cmd),
6191 .meta.flags = CMD_SIZE_HUGE,
6194 struct iwl3945_scan_cmd *scan;
6195 struct ieee80211_conf *conf = NULL;
6197 enum ieee80211_band band;
6199 conf = ieee80211_get_hw_conf(priv->hw);
6201 mutex_lock(&priv->mutex);
6203 if (!iwl3945_is_ready(priv)) {
6204 IWL_WARNING("request scan called when driver not ready.\n");
6208 /* Make sure the scan wasn't cancelled before this queued work
6209 * was given the chance to run... */
6210 if (!test_bit(STATUS_SCANNING, &priv->status))
6213 /* This should never be called or scheduled if there is currently
6214 * a scan active in the hardware. */
6215 if (test_bit(STATUS_SCAN_HW, &priv->status)) {
6216 IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. "
6217 "Ignoring second request.\n");
6222 if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
6223 IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n");
6227 if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
6228 IWL_DEBUG_HC("Scan request while abort pending. Queuing.\n");
6232 if (iwl3945_is_rfkill(priv)) {
6233 IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n");
6237 if (!test_bit(STATUS_READY, &priv->status)) {
6238 IWL_DEBUG_HC("Scan request while uninitialized. Queuing.\n");
6242 if (!priv->scan_bands) {
6243 IWL_DEBUG_HC("Aborting scan due to no requested bands\n");
6248 priv->scan = kmalloc(sizeof(struct iwl3945_scan_cmd) +
6249 IWL_MAX_SCAN_SIZE, GFP_KERNEL);
6256 memset(scan, 0, sizeof(struct iwl3945_scan_cmd) + IWL_MAX_SCAN_SIZE);
6258 scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
6259 scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
6261 if (iwl3945_is_associated(priv)) {
6264 u32 suspend_time = 100;
6265 u32 scan_suspend_time = 100;
6266 unsigned long flags;
6268 IWL_DEBUG_INFO("Scanning while associated...\n");
6270 spin_lock_irqsave(&priv->lock, flags);
6271 interval = priv->beacon_int;
6272 spin_unlock_irqrestore(&priv->lock, flags);
6274 scan->suspend_time = 0;
6275 scan->max_out_time = cpu_to_le32(200 * 1024);
6277 interval = suspend_time;
6279 * suspend time format:
6280 * 0-19: beacon interval in usec (time before exec.)
6282 * 24-31: number of beacons (suspend between channels)
6285 extra = (suspend_time / interval) << 24;
6286 scan_suspend_time = 0xFF0FFFFF &
6287 (extra | ((suspend_time % interval) * 1024));
6289 scan->suspend_time = cpu_to_le32(scan_suspend_time);
6290 IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n",
6291 scan_suspend_time, interval);
6294 /* We should add the ability for user to lock to PASSIVE ONLY */
6295 if (priv->one_direct_scan) {
6297 ("Kicking off one direct scan for '%s'\n",
6298 iwl3945_escape_essid(priv->direct_ssid,
6299 priv->direct_ssid_len));
6300 scan->direct_scan[0].id = WLAN_EID_SSID;
6301 scan->direct_scan[0].len = priv->direct_ssid_len;
6302 memcpy(scan->direct_scan[0].ssid,
6303 priv->direct_ssid, priv->direct_ssid_len);
6305 } else if (!iwl3945_is_associated(priv) && priv->essid_len) {
6306 scan->direct_scan[0].id = WLAN_EID_SSID;
6307 scan->direct_scan[0].len = priv->essid_len;
6308 memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
6313 /* We don't build a direct scan probe request; the uCode will do
6314 * that based on the direct_mask added to each channel entry */
6315 scan->tx_cmd.len = cpu_to_le16(
6316 iwl3945_fill_probe_req(priv, (struct ieee80211_mgmt *)scan->data,
6317 IWL_MAX_SCAN_SIZE - sizeof(*scan), 0));
6318 scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
6319 scan->tx_cmd.sta_id = priv->hw_setting.bcast_sta_id;
6320 scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
6322 /* flags + rate selection */
6324 switch (priv->scan_bands) {
6326 scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
6327 scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
6328 scan->good_CRC_th = 0;
6329 band = IEEE80211_BAND_2GHZ;
6333 scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
6334 scan->good_CRC_th = IWL_GOOD_CRC_TH;
6335 band = IEEE80211_BAND_5GHZ;
6339 IWL_WARNING("Invalid scan band count\n");
6343 /* select Rx antennas */
6344 scan->flags |= iwl3945_get_antenna_flags(priv);
6346 if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR)
6347 scan->filter_flags = RXON_FILTER_PROMISC_MSK;
6351 ("Initiating direct scan for %s.\n",
6352 iwl3945_escape_essid(priv->essid, priv->essid_len));
6353 scan->channel_count =
6354 iwl3945_get_channels_for_scan(
6355 priv, band, 1, /* active */
6357 (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
6359 IWL_DEBUG_SCAN("Initiating indirect scan.\n");
6360 scan->channel_count =
6361 iwl3945_get_channels_for_scan(
6362 priv, band, 0, /* passive */
6364 (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
6367 cmd.len += le16_to_cpu(scan->tx_cmd.len) +
6368 scan->channel_count * sizeof(struct iwl3945_scan_channel);
6370 scan->len = cpu_to_le16(cmd.len);
6372 set_bit(STATUS_SCAN_HW, &priv->status);
6373 rc = iwl3945_send_cmd_sync(priv, &cmd);
6377 queue_delayed_work(priv->workqueue, &priv->scan_check,
6378 IWL_SCAN_CHECK_WATCHDOG);
6380 mutex_unlock(&priv->mutex);
6384 /* inform mac80211 scan aborted */
6385 queue_work(priv->workqueue, &priv->scan_completed);
6386 mutex_unlock(&priv->mutex);
6389 static void iwl3945_bg_up(struct work_struct *data)
6391 struct iwl3945_priv *priv = container_of(data, struct iwl3945_priv, up);
6393 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6396 mutex_lock(&priv->mutex);
6398 mutex_unlock(&priv->mutex);
6401 static void iwl3945_bg_restart(struct work_struct *data)
6403 struct iwl3945_priv *priv = container_of(data, struct iwl3945_priv, restart);
6405 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6409 queue_work(priv->workqueue, &priv->up);
6412 static void iwl3945_bg_rx_replenish(struct work_struct *data)
6414 struct iwl3945_priv *priv =
6415 container_of(data, struct iwl3945_priv, rx_replenish);
6417 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6420 mutex_lock(&priv->mutex);
6421 iwl3945_rx_replenish(priv);
6422 mutex_unlock(&priv->mutex);
6425 #define IWL_DELAY_NEXT_SCAN (HZ*2)
6427 static void iwl3945_bg_post_associate(struct work_struct *data)
6429 struct iwl3945_priv *priv = container_of(data, struct iwl3945_priv,
6430 post_associate.work);
6433 struct ieee80211_conf *conf = NULL;
6434 DECLARE_MAC_BUF(mac);
6436 if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
6437 IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__);
6442 IWL_DEBUG_ASSOC("Associated as %d to: %s\n",
6444 print_mac(mac, priv->active_rxon.bssid_addr));
6446 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6449 mutex_lock(&priv->mutex);
6451 if (!priv->vif || !priv->is_open) {
6452 mutex_unlock(&priv->mutex);
6455 iwl3945_scan_cancel_timeout(priv, 200);
6457 conf = ieee80211_get_hw_conf(priv->hw);
6459 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
6460 iwl3945_commit_rxon(priv);
6462 memset(&priv->rxon_timing, 0, sizeof(struct iwl3945_rxon_time_cmd));
6463 iwl3945_setup_rxon_timing(priv);
6464 rc = iwl3945_send_cmd_pdu(priv, REPLY_RXON_TIMING,
6465 sizeof(priv->rxon_timing), &priv->rxon_timing);
6467 IWL_WARNING("REPLY_RXON_TIMING failed - "
6468 "Attempting to continue.\n");
6470 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
6472 priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
6474 IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n",
6475 priv->assoc_id, priv->beacon_int);
6477 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
6478 priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
6480 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
6482 if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
6483 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
6484 priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
6486 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
6488 if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
6489 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
6493 iwl3945_commit_rxon(priv);
6495 switch (priv->iw_mode) {
6496 case IEEE80211_IF_TYPE_STA:
6497 iwl3945_rate_scale_init(priv->hw, IWL_AP_ID);
6500 case IEEE80211_IF_TYPE_IBSS:
6502 /* clear out the station table */
6503 iwl3945_clear_stations_table(priv);
6505 iwl3945_add_station(priv, iwl3945_broadcast_addr, 0, 0);
6506 iwl3945_add_station(priv, priv->bssid, 0, 0);
6507 iwl3945_sync_sta(priv, IWL_STA_ID,
6508 (priv->band == IEEE80211_BAND_5GHZ) ?
6509 IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP,
6511 iwl3945_rate_scale_init(priv->hw, IWL_STA_ID);
6512 iwl3945_send_beacon_cmd(priv);
6517 IWL_ERROR("%s Should not be called in %d mode\n",
6518 __FUNCTION__, priv->iw_mode);
6522 iwl3945_sequence_reset(priv);
6524 iwl3945_activate_qos(priv, 0);
6526 /* we have just associated, don't start scan too early */
6527 priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN;
6528 mutex_unlock(&priv->mutex);
6531 static void iwl3945_bg_abort_scan(struct work_struct *work)
6533 struct iwl3945_priv *priv = container_of(work, struct iwl3945_priv, abort_scan);
6535 if (!iwl3945_is_ready(priv))
6538 mutex_lock(&priv->mutex);
6540 set_bit(STATUS_SCAN_ABORTING, &priv->status);
6541 iwl3945_send_scan_abort(priv);
6543 mutex_unlock(&priv->mutex);
6546 static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
6548 static void iwl3945_bg_scan_completed(struct work_struct *work)
6550 struct iwl3945_priv *priv =
6551 container_of(work, struct iwl3945_priv, scan_completed);
6553 IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN, "SCAN complete scan\n");
6555 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6558 if (test_bit(STATUS_CONF_PENDING, &priv->status))
6559 iwl3945_mac_config(priv->hw, ieee80211_get_hw_conf(priv->hw));
6561 ieee80211_scan_completed(priv->hw);
6563 /* Since setting the TXPOWER may have been deferred while
6564 * performing the scan, fire one off */
6565 mutex_lock(&priv->mutex);
6566 iwl3945_hw_reg_send_txpower(priv);
6567 mutex_unlock(&priv->mutex);
6570 /*****************************************************************************
6572 * mac80211 entry point functions
6574 *****************************************************************************/
6576 #define UCODE_READY_TIMEOUT (2 * HZ)
6578 static int iwl3945_mac_start(struct ieee80211_hw *hw)
6580 struct iwl3945_priv *priv = hw->priv;
6583 IWL_DEBUG_MAC80211("enter\n");
6585 if (pci_enable_device(priv->pci_dev)) {
6586 IWL_ERROR("Fail to pci_enable_device\n");
6589 pci_restore_state(priv->pci_dev);
6590 pci_enable_msi(priv->pci_dev);
6592 ret = request_irq(priv->pci_dev->irq, iwl3945_isr, IRQF_SHARED,
6595 IWL_ERROR("Error allocating IRQ %d\n", priv->pci_dev->irq);
6596 goto out_disable_msi;
6599 /* we should be verifying the device is ready to be opened */
6600 mutex_lock(&priv->mutex);
6602 memset(&priv->staging_rxon, 0, sizeof(struct iwl3945_rxon_cmd));
6603 /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
6604 * ucode filename and max sizes are card-specific. */
6606 if (!priv->ucode_code.len) {
6607 ret = iwl3945_read_ucode(priv);
6609 IWL_ERROR("Could not read microcode: %d\n", ret);
6610 mutex_unlock(&priv->mutex);
6611 goto out_release_irq;
6615 ret = __iwl3945_up(priv);
6617 mutex_unlock(&priv->mutex);
6620 goto out_release_irq;
6622 IWL_DEBUG_INFO("Start UP work.\n");
6624 if (test_bit(STATUS_IN_SUSPEND, &priv->status))
6627 /* Wait for START_ALIVE from ucode. Otherwise callbacks from
6628 * mac80211 will not be run successfully. */
6629 ret = wait_event_interruptible_timeout(priv->wait_command_queue,
6630 test_bit(STATUS_READY, &priv->status),
6631 UCODE_READY_TIMEOUT);
6633 if (!test_bit(STATUS_READY, &priv->status)) {
6634 IWL_ERROR("Wait for START_ALIVE timeout after %dms.\n",
6635 jiffies_to_msecs(UCODE_READY_TIMEOUT));
6637 goto out_release_irq;
6642 IWL_DEBUG_MAC80211("leave\n");
6646 free_irq(priv->pci_dev->irq, priv);
6648 pci_disable_msi(priv->pci_dev);
6649 pci_disable_device(priv->pci_dev);
6651 IWL_DEBUG_MAC80211("leave - failed\n");
6655 static void iwl3945_mac_stop(struct ieee80211_hw *hw)
6657 struct iwl3945_priv *priv = hw->priv;
6659 IWL_DEBUG_MAC80211("enter\n");
6661 if (!priv->is_open) {
6662 IWL_DEBUG_MAC80211("leave - skip\n");
6668 if (iwl3945_is_ready_rf(priv)) {
6669 /* stop mac, cancel any scan request and clear
6670 * RXON_FILTER_ASSOC_MSK BIT
6672 mutex_lock(&priv->mutex);
6673 iwl3945_scan_cancel_timeout(priv, 100);
6674 cancel_delayed_work(&priv->post_associate);
6675 mutex_unlock(&priv->mutex);
6680 flush_workqueue(priv->workqueue);
6681 free_irq(priv->pci_dev->irq, priv);
6682 pci_disable_msi(priv->pci_dev);
6683 pci_save_state(priv->pci_dev);
6684 pci_disable_device(priv->pci_dev);
6686 IWL_DEBUG_MAC80211("leave\n");
6689 static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
6690 struct ieee80211_tx_control *ctl)
6692 struct iwl3945_priv *priv = hw->priv;
6694 IWL_DEBUG_MAC80211("enter\n");
6696 if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
6697 IWL_DEBUG_MAC80211("leave - monitor\n");
6701 IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
6702 ctl->tx_rate->bitrate);
6704 if (iwl3945_tx_skb(priv, skb, ctl))
6705 dev_kfree_skb_any(skb);
6707 IWL_DEBUG_MAC80211("leave\n");
6711 static int iwl3945_mac_add_interface(struct ieee80211_hw *hw,
6712 struct ieee80211_if_init_conf *conf)
6714 struct iwl3945_priv *priv = hw->priv;
6715 unsigned long flags;
6716 DECLARE_MAC_BUF(mac);
6718 IWL_DEBUG_MAC80211("enter: type %d\n", conf->type);
6721 IWL_DEBUG_MAC80211("leave - vif != NULL\n");
6725 spin_lock_irqsave(&priv->lock, flags);
6726 priv->vif = conf->vif;
6728 spin_unlock_irqrestore(&priv->lock, flags);
6730 mutex_lock(&priv->mutex);
6732 if (conf->mac_addr) {
6733 IWL_DEBUG_MAC80211("Set: %s\n", print_mac(mac, conf->mac_addr));
6734 memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
6737 if (iwl3945_is_ready(priv))
6738 iwl3945_set_mode(priv, conf->type);
6740 mutex_unlock(&priv->mutex);
6742 IWL_DEBUG_MAC80211("leave\n");
6747 * iwl3945_mac_config - mac80211 config callback
6749 * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
6750 * be set inappropriately and the driver currently sets the hardware up to
6751 * use it whenever needed.
6753 static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
6755 struct iwl3945_priv *priv = hw->priv;
6756 const struct iwl3945_channel_info *ch_info;
6757 unsigned long flags;
6760 mutex_lock(&priv->mutex);
6761 IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value);
6763 priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
6765 if (!iwl3945_is_ready(priv)) {
6766 IWL_DEBUG_MAC80211("leave - not ready\n");
6771 if (unlikely(!iwl3945_param_disable_hw_scan &&
6772 test_bit(STATUS_SCANNING, &priv->status))) {
6773 IWL_DEBUG_MAC80211("leave - scanning\n");
6774 set_bit(STATUS_CONF_PENDING, &priv->status);
6775 mutex_unlock(&priv->mutex);
6779 spin_lock_irqsave(&priv->lock, flags);
6781 ch_info = iwl3945_get_channel_info(priv, conf->channel->band,
6782 conf->channel->hw_value);
6783 if (!is_channel_valid(ch_info)) {
6784 IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this SKU.\n",
6785 conf->channel->hw_value, conf->channel->band);
6786 IWL_DEBUG_MAC80211("leave - invalid channel\n");
6787 spin_unlock_irqrestore(&priv->lock, flags);
6792 iwl3945_set_rxon_channel(priv, conf->channel->band, conf->channel->hw_value);
6794 iwl3945_set_flags_for_phymode(priv, conf->channel->band);
6796 /* The list of supported rates and rate mask can be different
6797 * for each phymode; since the phymode may have changed, reset
6798 * the rate mask to what mac80211 lists */
6799 iwl3945_set_rate(priv);
6801 spin_unlock_irqrestore(&priv->lock, flags);
6803 #ifdef IEEE80211_CONF_CHANNEL_SWITCH
6804 if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) {
6805 iwl3945_hw_channel_switch(priv, conf->channel);
6810 iwl3945_radio_kill_sw(priv, !conf->radio_enabled);
6812 if (!conf->radio_enabled) {
6813 IWL_DEBUG_MAC80211("leave - radio disabled\n");
6817 if (iwl3945_is_rfkill(priv)) {
6818 IWL_DEBUG_MAC80211("leave - RF kill\n");
6823 iwl3945_set_rate(priv);
6825 if (memcmp(&priv->active_rxon,
6826 &priv->staging_rxon, sizeof(priv->staging_rxon)))
6827 iwl3945_commit_rxon(priv);
6829 IWL_DEBUG_INFO("No re-sending same RXON configuration.\n");
6831 IWL_DEBUG_MAC80211("leave\n");
6834 clear_bit(STATUS_CONF_PENDING, &priv->status);
6835 mutex_unlock(&priv->mutex);
6839 static void iwl3945_config_ap(struct iwl3945_priv *priv)
6843 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6846 /* The following should be done only at AP bring up */
6847 if ((priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) == 0) {
6849 /* RXON - unassoc (to set timing command) */
6850 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
6851 iwl3945_commit_rxon(priv);
6854 memset(&priv->rxon_timing, 0, sizeof(struct iwl3945_rxon_time_cmd));
6855 iwl3945_setup_rxon_timing(priv);
6856 rc = iwl3945_send_cmd_pdu(priv, REPLY_RXON_TIMING,
6857 sizeof(priv->rxon_timing), &priv->rxon_timing);
6859 IWL_WARNING("REPLY_RXON_TIMING failed - "
6860 "Attempting to continue.\n");
6862 /* FIXME: what should be the assoc_id for AP? */
6863 priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
6864 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
6865 priv->staging_rxon.flags |=
6866 RXON_FLG_SHORT_PREAMBLE_MSK;
6868 priv->staging_rxon.flags &=
6869 ~RXON_FLG_SHORT_PREAMBLE_MSK;
6871 if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
6872 if (priv->assoc_capability &
6873 WLAN_CAPABILITY_SHORT_SLOT_TIME)
6874 priv->staging_rxon.flags |=
6875 RXON_FLG_SHORT_SLOT_MSK;
6877 priv->staging_rxon.flags &=
6878 ~RXON_FLG_SHORT_SLOT_MSK;
6880 if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
6881 priv->staging_rxon.flags &=
6882 ~RXON_FLG_SHORT_SLOT_MSK;
6884 /* restore RXON assoc */
6885 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
6886 iwl3945_commit_rxon(priv);
6887 iwl3945_add_station(priv, iwl3945_broadcast_addr, 0, 0);
6889 iwl3945_send_beacon_cmd(priv);
6891 /* FIXME - we need to add code here to detect a totally new
6892 * configuration, reset the AP, unassoc, rxon timing, assoc,
6893 * clear sta table, add BCAST sta... */
6896 static int iwl3945_mac_config_interface(struct ieee80211_hw *hw,
6897 struct ieee80211_vif *vif,
6898 struct ieee80211_if_conf *conf)
6900 struct iwl3945_priv *priv = hw->priv;
6901 DECLARE_MAC_BUF(mac);
6902 unsigned long flags;
6908 if (priv->vif != vif) {
6909 IWL_DEBUG_MAC80211("leave - priv->vif != vif\n");
6910 mutex_unlock(&priv->mutex);
6914 /* XXX: this MUST use conf->mac_addr */
6916 if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) &&
6917 (!conf->beacon || !conf->ssid_len)) {
6919 ("Leaving in AP mode because HostAPD is not ready.\n");
6923 if (!iwl3945_is_alive(priv))
6926 mutex_lock(&priv->mutex);
6929 IWL_DEBUG_MAC80211("bssid: %s\n",
6930 print_mac(mac, conf->bssid));
6933 * very dubious code was here; the probe filtering flag is never set:
6935 if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) &&
6936 !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) {
6939 if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
6941 conf->bssid = priv->mac_addr;
6942 memcpy(priv->bssid, priv->mac_addr, ETH_ALEN);
6943 IWL_DEBUG_MAC80211("bssid was set to: %s\n",
6944 print_mac(mac, conf->bssid));
6946 if (priv->ibss_beacon)
6947 dev_kfree_skb(priv->ibss_beacon);
6949 priv->ibss_beacon = conf->beacon;
6952 if (iwl3945_is_rfkill(priv))
6955 if (conf->bssid && !is_zero_ether_addr(conf->bssid) &&
6956 !is_multicast_ether_addr(conf->bssid)) {
6957 /* If there is currently a HW scan going on in the background
6958 * then we need to cancel it else the RXON below will fail. */
6959 if (iwl3945_scan_cancel_timeout(priv, 100)) {
6960 IWL_WARNING("Aborted scan still in progress "
6962 IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
6963 mutex_unlock(&priv->mutex);
6966 memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN);
6968 /* TODO: Audit driver for usage of these members and see
6969 * if mac80211 deprecates them (priv->bssid looks like it
6970 * shouldn't be there, but I haven't scanned the IBSS code
6971 * to verify) - jpk */
6972 memcpy(priv->bssid, conf->bssid, ETH_ALEN);
6974 if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
6975 iwl3945_config_ap(priv);
6977 rc = iwl3945_commit_rxon(priv);
6978 if ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && rc)
6979 iwl3945_add_station(priv,
6980 priv->active_rxon.bssid_addr, 1, 0);
6984 iwl3945_scan_cancel_timeout(priv, 100);
6985 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
6986 iwl3945_commit_rxon(priv);
6990 spin_lock_irqsave(&priv->lock, flags);
6991 if (!conf->ssid_len)
6992 memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
6994 memcpy(priv->essid, conf->ssid, conf->ssid_len);
6996 priv->essid_len = conf->ssid_len;
6997 spin_unlock_irqrestore(&priv->lock, flags);
6999 IWL_DEBUG_MAC80211("leave\n");
7000 mutex_unlock(&priv->mutex);
7005 static void iwl3945_configure_filter(struct ieee80211_hw *hw,
7006 unsigned int changed_flags,
7007 unsigned int *total_flags,
7008 int mc_count, struct dev_addr_list *mc_list)
7012 * see also iwl3945_connection_init_rx_config
7017 static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw,
7018 struct ieee80211_if_init_conf *conf)
7020 struct iwl3945_priv *priv = hw->priv;
7022 IWL_DEBUG_MAC80211("enter\n");
7024 mutex_lock(&priv->mutex);
7026 if (iwl3945_is_ready_rf(priv)) {
7027 iwl3945_scan_cancel_timeout(priv, 100);
7028 cancel_delayed_work(&priv->post_associate);
7029 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
7030 iwl3945_commit_rxon(priv);
7032 if (priv->vif == conf->vif) {
7034 memset(priv->bssid, 0, ETH_ALEN);
7035 memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
7036 priv->essid_len = 0;
7038 mutex_unlock(&priv->mutex);
7040 IWL_DEBUG_MAC80211("leave\n");
7043 static int iwl3945_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
7046 unsigned long flags;
7047 struct iwl3945_priv *priv = hw->priv;
7049 IWL_DEBUG_MAC80211("enter\n");
7051 mutex_lock(&priv->mutex);
7052 spin_lock_irqsave(&priv->lock, flags);
7054 if (!iwl3945_is_ready_rf(priv)) {
7056 IWL_DEBUG_MAC80211("leave - not ready or exit pending\n");
7060 if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { /* APs don't scan */
7062 IWL_ERROR("ERROR: APs don't scan\n");
7066 /* we don't schedule scan within next_scan_jiffies period */
7067 if (priv->next_scan_jiffies &&
7068 time_after(priv->next_scan_jiffies, jiffies)) {
7072 /* if we just finished scan ask for delay */
7073 if (priv->last_scan_jiffies && time_after(priv->last_scan_jiffies +
7074 IWL_DELAY_NEXT_SCAN, jiffies)) {
7079 IWL_DEBUG_SCAN("direct scan for %s [%d]\n ",
7080 iwl3945_escape_essid(ssid, len), (int)len);
7082 priv->one_direct_scan = 1;
7083 priv->direct_ssid_len = (u8)
7084 min((u8) len, (u8) IW_ESSID_MAX_SIZE);
7085 memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len);
7087 priv->one_direct_scan = 0;
7089 rc = iwl3945_scan_initiate(priv);
7091 IWL_DEBUG_MAC80211("leave\n");
7094 spin_unlock_irqrestore(&priv->lock, flags);
7095 mutex_unlock(&priv->mutex);
7100 static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
7101 const u8 *local_addr, const u8 *addr,
7102 struct ieee80211_key_conf *key)
7104 struct iwl3945_priv *priv = hw->priv;
7108 IWL_DEBUG_MAC80211("enter\n");
7110 if (!iwl3945_param_hwcrypto) {
7111 IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n");
7115 if (is_zero_ether_addr(addr))
7116 /* only support pairwise keys */
7119 sta_id = iwl3945_hw_find_station(priv, addr);
7120 if (sta_id == IWL_INVALID_STATION) {
7121 DECLARE_MAC_BUF(mac);
7123 IWL_DEBUG_MAC80211("leave - %s not in station map.\n",
7124 print_mac(mac, addr));
7128 mutex_lock(&priv->mutex);
7130 iwl3945_scan_cancel_timeout(priv, 100);
7134 rc = iwl3945_update_sta_key_info(priv, key, sta_id);
7136 iwl3945_set_rxon_hwcrypto(priv, 1);
7137 iwl3945_commit_rxon(priv);
7138 key->hw_key_idx = sta_id;
7139 IWL_DEBUG_MAC80211("set_key success, using hwcrypto\n");
7140 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
7144 rc = iwl3945_clear_sta_key_info(priv, sta_id);
7146 iwl3945_set_rxon_hwcrypto(priv, 0);
7147 iwl3945_commit_rxon(priv);
7148 IWL_DEBUG_MAC80211("disable hwcrypto key\n");
7155 IWL_DEBUG_MAC80211("leave\n");
7156 mutex_unlock(&priv->mutex);
7161 static int iwl3945_mac_conf_tx(struct ieee80211_hw *hw, int queue,
7162 const struct ieee80211_tx_queue_params *params)
7164 struct iwl3945_priv *priv = hw->priv;
7165 unsigned long flags;
7168 IWL_DEBUG_MAC80211("enter\n");
7170 if (!iwl3945_is_ready_rf(priv)) {
7171 IWL_DEBUG_MAC80211("leave - RF not ready\n");
7175 if (queue >= AC_NUM) {
7176 IWL_DEBUG_MAC80211("leave - queue >= AC_NUM %d\n", queue);
7180 if (!priv->qos_data.qos_enable) {
7181 priv->qos_data.qos_active = 0;
7182 IWL_DEBUG_MAC80211("leave - qos not enabled\n");
7185 q = AC_NUM - 1 - queue;
7187 spin_lock_irqsave(&priv->lock, flags);
7189 priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min);
7190 priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max);
7191 priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
7192 priv->qos_data.def_qos_parm.ac[q].edca_txop =
7193 cpu_to_le16((params->txop * 32));
7195 priv->qos_data.def_qos_parm.ac[q].reserved1 = 0;
7196 priv->qos_data.qos_active = 1;
7198 spin_unlock_irqrestore(&priv->lock, flags);
7200 mutex_lock(&priv->mutex);
7201 if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
7202 iwl3945_activate_qos(priv, 1);
7203 else if (priv->assoc_id && iwl3945_is_associated(priv))
7204 iwl3945_activate_qos(priv, 0);
7206 mutex_unlock(&priv->mutex);
7208 IWL_DEBUG_MAC80211("leave\n");
7212 static int iwl3945_mac_get_tx_stats(struct ieee80211_hw *hw,
7213 struct ieee80211_tx_queue_stats *stats)
7215 struct iwl3945_priv *priv = hw->priv;
7217 struct iwl3945_tx_queue *txq;
7218 struct iwl3945_queue *q;
7219 unsigned long flags;
7221 IWL_DEBUG_MAC80211("enter\n");
7223 if (!iwl3945_is_ready_rf(priv)) {
7224 IWL_DEBUG_MAC80211("leave - RF not ready\n");
7228 spin_lock_irqsave(&priv->lock, flags);
7230 for (i = 0; i < AC_NUM; i++) {
7231 txq = &priv->txq[i];
7233 avail = iwl3945_queue_space(q);
7235 stats->data[i].len = q->n_window - avail;
7236 stats->data[i].limit = q->n_window - q->high_mark;
7237 stats->data[i].count = q->n_window;
7240 spin_unlock_irqrestore(&priv->lock, flags);
7242 IWL_DEBUG_MAC80211("leave\n");
7247 static int iwl3945_mac_get_stats(struct ieee80211_hw *hw,
7248 struct ieee80211_low_level_stats *stats)
7250 IWL_DEBUG_MAC80211("enter\n");
7251 IWL_DEBUG_MAC80211("leave\n");
7256 static u64 iwl3945_mac_get_tsf(struct ieee80211_hw *hw)
7258 IWL_DEBUG_MAC80211("enter\n");
7259 IWL_DEBUG_MAC80211("leave\n");
7264 static void iwl3945_mac_reset_tsf(struct ieee80211_hw *hw)
7266 struct iwl3945_priv *priv = hw->priv;
7267 unsigned long flags;
7269 mutex_lock(&priv->mutex);
7270 IWL_DEBUG_MAC80211("enter\n");
7272 iwl3945_reset_qos(priv);
7274 cancel_delayed_work(&priv->post_associate);
7276 spin_lock_irqsave(&priv->lock, flags);
7278 priv->assoc_capability = 0;
7279 priv->call_post_assoc_from_beacon = 0;
7281 /* new association get rid of ibss beacon skb */
7282 if (priv->ibss_beacon)
7283 dev_kfree_skb(priv->ibss_beacon);
7285 priv->ibss_beacon = NULL;
7287 priv->beacon_int = priv->hw->conf.beacon_int;
7288 priv->timestamp1 = 0;
7289 priv->timestamp0 = 0;
7290 if ((priv->iw_mode == IEEE80211_IF_TYPE_STA))
7291 priv->beacon_int = 0;
7293 spin_unlock_irqrestore(&priv->lock, flags);
7295 if (!iwl3945_is_ready_rf(priv)) {
7296 IWL_DEBUG_MAC80211("leave - not ready\n");
7297 mutex_unlock(&priv->mutex);
7301 /* we are restarting association process
7302 * clear RXON_FILTER_ASSOC_MSK bit
7304 if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
7305 iwl3945_scan_cancel_timeout(priv, 100);
7306 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
7307 iwl3945_commit_rxon(priv);
7310 /* Per mac80211.h: This is only used in IBSS mode... */
7311 if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) {
7313 IWL_DEBUG_MAC80211("leave - not in IBSS\n");
7314 mutex_unlock(&priv->mutex);
7318 priv->only_active_channel = 0;
7320 iwl3945_set_rate(priv);
7322 mutex_unlock(&priv->mutex);
7324 IWL_DEBUG_MAC80211("leave\n");
7328 static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
7329 struct ieee80211_tx_control *control)
7331 struct iwl3945_priv *priv = hw->priv;
7332 unsigned long flags;
7334 mutex_lock(&priv->mutex);
7335 IWL_DEBUG_MAC80211("enter\n");
7337 if (!iwl3945_is_ready_rf(priv)) {
7338 IWL_DEBUG_MAC80211("leave - RF not ready\n");
7339 mutex_unlock(&priv->mutex);
7343 if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) {
7344 IWL_DEBUG_MAC80211("leave - not IBSS\n");
7345 mutex_unlock(&priv->mutex);
7349 spin_lock_irqsave(&priv->lock, flags);
7351 if (priv->ibss_beacon)
7352 dev_kfree_skb(priv->ibss_beacon);
7354 priv->ibss_beacon = skb;
7358 IWL_DEBUG_MAC80211("leave\n");
7359 spin_unlock_irqrestore(&priv->lock, flags);
7361 iwl3945_reset_qos(priv);
7363 queue_work(priv->workqueue, &priv->post_associate.work);
7365 mutex_unlock(&priv->mutex);
7370 /*****************************************************************************
7374 *****************************************************************************/
7376 #ifdef CONFIG_IWL3945_DEBUG
7379 * The following adds a new attribute to the sysfs representation
7380 * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
7381 * used for controlling the debug level.
7383 * See the level definitions in iwl for details.
7386 static ssize_t show_debug_level(struct device_driver *d, char *buf)
7388 return sprintf(buf, "0x%08X\n", iwl3945_debug_level);
7390 static ssize_t store_debug_level(struct device_driver *d,
7391 const char *buf, size_t count)
7393 char *p = (char *)buf;
7396 val = simple_strtoul(p, &p, 0);
7398 printk(KERN_INFO DRV_NAME
7399 ": %s is not in hex or decimal form.\n", buf);
7401 iwl3945_debug_level = val;
7403 return strnlen(buf, count);
7406 static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO,
7407 show_debug_level, store_debug_level);
7409 #endif /* CONFIG_IWL3945_DEBUG */
7411 static ssize_t show_rf_kill(struct device *d,
7412 struct device_attribute *attr, char *buf)
7415 * 0 - RF kill not enabled
7416 * 1 - SW based RF kill active (sysfs)
7417 * 2 - HW based RF kill active
7418 * 3 - Both HW and SW based RF kill active
7420 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7421 int val = (test_bit(STATUS_RF_KILL_SW, &priv->status) ? 0x1 : 0x0) |
7422 (test_bit(STATUS_RF_KILL_HW, &priv->status) ? 0x2 : 0x0);
7424 return sprintf(buf, "%i\n", val);
7427 static ssize_t store_rf_kill(struct device *d,
7428 struct device_attribute *attr,
7429 const char *buf, size_t count)
7431 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7433 mutex_lock(&priv->mutex);
7434 iwl3945_radio_kill_sw(priv, buf[0] == '1');
7435 mutex_unlock(&priv->mutex);
7440 static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill);
7442 static ssize_t show_temperature(struct device *d,
7443 struct device_attribute *attr, char *buf)
7445 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7447 if (!iwl3945_is_alive(priv))
7450 return sprintf(buf, "%d\n", iwl3945_hw_get_temperature(priv));
7453 static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
7455 static ssize_t show_rs_window(struct device *d,
7456 struct device_attribute *attr,
7459 struct iwl3945_priv *priv = d->driver_data;
7460 return iwl3945_fill_rs_info(priv->hw, buf, IWL_AP_ID);
7462 static DEVICE_ATTR(rs_window, S_IRUGO, show_rs_window, NULL);
7464 static ssize_t show_tx_power(struct device *d,
7465 struct device_attribute *attr, char *buf)
7467 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7468 return sprintf(buf, "%d\n", priv->user_txpower_limit);
7471 static ssize_t store_tx_power(struct device *d,
7472 struct device_attribute *attr,
7473 const char *buf, size_t count)
7475 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7476 char *p = (char *)buf;
7479 val = simple_strtoul(p, &p, 10);
7481 printk(KERN_INFO DRV_NAME
7482 ": %s is not in decimal form.\n", buf);
7484 iwl3945_hw_reg_set_txpower(priv, val);
7489 static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
7491 static ssize_t show_flags(struct device *d,
7492 struct device_attribute *attr, char *buf)
7494 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7496 return sprintf(buf, "0x%04X\n", priv->active_rxon.flags);
7499 static ssize_t store_flags(struct device *d,
7500 struct device_attribute *attr,
7501 const char *buf, size_t count)
7503 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7504 u32 flags = simple_strtoul(buf, NULL, 0);
7506 mutex_lock(&priv->mutex);
7507 if (le32_to_cpu(priv->staging_rxon.flags) != flags) {
7508 /* Cancel any currently running scans... */
7509 if (iwl3945_scan_cancel_timeout(priv, 100))
7510 IWL_WARNING("Could not cancel scan.\n");
7512 IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n",
7514 priv->staging_rxon.flags = cpu_to_le32(flags);
7515 iwl3945_commit_rxon(priv);
7518 mutex_unlock(&priv->mutex);
7523 static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
7525 static ssize_t show_filter_flags(struct device *d,
7526 struct device_attribute *attr, char *buf)
7528 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7530 return sprintf(buf, "0x%04X\n",
7531 le32_to_cpu(priv->active_rxon.filter_flags));
7534 static ssize_t store_filter_flags(struct device *d,
7535 struct device_attribute *attr,
7536 const char *buf, size_t count)
7538 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7539 u32 filter_flags = simple_strtoul(buf, NULL, 0);
7541 mutex_lock(&priv->mutex);
7542 if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) {
7543 /* Cancel any currently running scans... */
7544 if (iwl3945_scan_cancel_timeout(priv, 100))
7545 IWL_WARNING("Could not cancel scan.\n");
7547 IWL_DEBUG_INFO("Committing rxon.filter_flags = "
7548 "0x%04X\n", filter_flags);
7549 priv->staging_rxon.filter_flags =
7550 cpu_to_le32(filter_flags);
7551 iwl3945_commit_rxon(priv);
7554 mutex_unlock(&priv->mutex);
7559 static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags,
7560 store_filter_flags);
7562 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
7564 static ssize_t show_measurement(struct device *d,
7565 struct device_attribute *attr, char *buf)
7567 struct iwl3945_priv *priv = dev_get_drvdata(d);
7568 struct iwl3945_spectrum_notification measure_report;
7569 u32 size = sizeof(measure_report), len = 0, ofs = 0;
7570 u8 *data = (u8 *) & measure_report;
7571 unsigned long flags;
7573 spin_lock_irqsave(&priv->lock, flags);
7574 if (!(priv->measurement_status & MEASUREMENT_READY)) {
7575 spin_unlock_irqrestore(&priv->lock, flags);
7578 memcpy(&measure_report, &priv->measure_report, size);
7579 priv->measurement_status = 0;
7580 spin_unlock_irqrestore(&priv->lock, flags);
7582 while (size && (PAGE_SIZE - len)) {
7583 hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
7584 PAGE_SIZE - len, 1);
7586 if (PAGE_SIZE - len)
7590 size -= min(size, 16U);
7596 static ssize_t store_measurement(struct device *d,
7597 struct device_attribute *attr,
7598 const char *buf, size_t count)
7600 struct iwl3945_priv *priv = dev_get_drvdata(d);
7601 struct ieee80211_measurement_params params = {
7602 .channel = le16_to_cpu(priv->active_rxon.channel),
7603 .start_time = cpu_to_le64(priv->last_tsf),
7604 .duration = cpu_to_le16(1),
7606 u8 type = IWL_MEASURE_BASIC;
7612 strncpy(buffer, buf, min(sizeof(buffer), count));
7613 channel = simple_strtoul(p, NULL, 0);
7615 params.channel = channel;
7618 while (*p && *p != ' ')
7621 type = simple_strtoul(p + 1, NULL, 0);
7624 IWL_DEBUG_INFO("Invoking measurement of type %d on "
7625 "channel %d (for '%s')\n", type, params.channel, buf);
7626 iwl3945_get_measurement(priv, ¶ms, type);
7631 static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR,
7632 show_measurement, store_measurement);
7633 #endif /* CONFIG_IWL3945_SPECTRUM_MEASUREMENT */
7635 static ssize_t store_retry_rate(struct device *d,
7636 struct device_attribute *attr,
7637 const char *buf, size_t count)
7639 struct iwl3945_priv *priv = dev_get_drvdata(d);
7641 priv->retry_rate = simple_strtoul(buf, NULL, 0);
7642 if (priv->retry_rate <= 0)
7643 priv->retry_rate = 1;
7648 static ssize_t show_retry_rate(struct device *d,
7649 struct device_attribute *attr, char *buf)
7651 struct iwl3945_priv *priv = dev_get_drvdata(d);
7652 return sprintf(buf, "%d", priv->retry_rate);
7655 static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate,
7658 static ssize_t store_power_level(struct device *d,
7659 struct device_attribute *attr,
7660 const char *buf, size_t count)
7662 struct iwl3945_priv *priv = dev_get_drvdata(d);
7666 mode = simple_strtoul(buf, NULL, 0);
7667 mutex_lock(&priv->mutex);
7669 if (!iwl3945_is_ready(priv)) {
7674 if ((mode < 1) || (mode > IWL_POWER_LIMIT) || (mode == IWL_POWER_AC))
7675 mode = IWL_POWER_AC;
7677 mode |= IWL_POWER_ENABLED;
7679 if (mode != priv->power_mode) {
7680 rc = iwl3945_send_power_mode(priv, IWL_POWER_LEVEL(mode));
7682 IWL_DEBUG_MAC80211("failed setting power mode.\n");
7685 priv->power_mode = mode;
7691 mutex_unlock(&priv->mutex);
7695 #define MAX_WX_STRING 80
7697 /* Values are in microsecond */
7698 static const s32 timeout_duration[] = {
7705 static const s32 period_duration[] = {
7713 static ssize_t show_power_level(struct device *d,
7714 struct device_attribute *attr, char *buf)
7716 struct iwl3945_priv *priv = dev_get_drvdata(d);
7717 int level = IWL_POWER_LEVEL(priv->power_mode);
7720 p += sprintf(p, "%d ", level);
7722 case IWL_POWER_MODE_CAM:
7724 p += sprintf(p, "(AC)");
7726 case IWL_POWER_BATTERY:
7727 p += sprintf(p, "(BATTERY)");
7731 "(Timeout %dms, Period %dms)",
7732 timeout_duration[level - 1] / 1000,
7733 period_duration[level - 1] / 1000);
7736 if (!(priv->power_mode & IWL_POWER_ENABLED))
7737 p += sprintf(p, " OFF\n");
7739 p += sprintf(p, " \n");
7741 return (p - buf + 1);
7745 static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level,
7748 static ssize_t show_channels(struct device *d,
7749 struct device_attribute *attr, char *buf)
7751 /* all this shit doesn't belong into sysfs anyway */
7755 static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL);
7757 static ssize_t show_statistics(struct device *d,
7758 struct device_attribute *attr, char *buf)
7760 struct iwl3945_priv *priv = dev_get_drvdata(d);
7761 u32 size = sizeof(struct iwl3945_notif_statistics);
7762 u32 len = 0, ofs = 0;
7763 u8 *data = (u8 *) & priv->statistics;
7766 if (!iwl3945_is_alive(priv))
7769 mutex_lock(&priv->mutex);
7770 rc = iwl3945_send_statistics_request(priv);
7771 mutex_unlock(&priv->mutex);
7775 "Error sending statistics request: 0x%08X\n", rc);
7779 while (size && (PAGE_SIZE - len)) {
7780 hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
7781 PAGE_SIZE - len, 1);
7783 if (PAGE_SIZE - len)
7787 size -= min(size, 16U);
7793 static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL);
7795 static ssize_t show_antenna(struct device *d,
7796 struct device_attribute *attr, char *buf)
7798 struct iwl3945_priv *priv = dev_get_drvdata(d);
7800 if (!iwl3945_is_alive(priv))
7803 return sprintf(buf, "%d\n", priv->antenna);
7806 static ssize_t store_antenna(struct device *d,
7807 struct device_attribute *attr,
7808 const char *buf, size_t count)
7811 struct iwl3945_priv *priv = dev_get_drvdata(d);
7816 if (sscanf(buf, "%1i", &ant) != 1) {
7817 IWL_DEBUG_INFO("not in hex or decimal form.\n");
7821 if ((ant >= 0) && (ant <= 2)) {
7822 IWL_DEBUG_INFO("Setting antenna select to %d.\n", ant);
7823 priv->antenna = (enum iwl3945_antenna)ant;
7825 IWL_DEBUG_INFO("Bad antenna select value %d.\n", ant);
7831 static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna);
7833 static ssize_t show_status(struct device *d,
7834 struct device_attribute *attr, char *buf)
7836 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7837 if (!iwl3945_is_alive(priv))
7839 return sprintf(buf, "0x%08x\n", (int)priv->status);
7842 static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
7844 static ssize_t dump_error_log(struct device *d,
7845 struct device_attribute *attr,
7846 const char *buf, size_t count)
7848 char *p = (char *)buf;
7851 iwl3945_dump_nic_error_log((struct iwl3945_priv *)d->driver_data);
7853 return strnlen(buf, count);
7856 static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log);
7858 static ssize_t dump_event_log(struct device *d,
7859 struct device_attribute *attr,
7860 const char *buf, size_t count)
7862 char *p = (char *)buf;
7865 iwl3945_dump_nic_event_log((struct iwl3945_priv *)d->driver_data);
7867 return strnlen(buf, count);
7870 static DEVICE_ATTR(dump_events, S_IWUSR, NULL, dump_event_log);
7872 /*****************************************************************************
7874 * driver setup and teardown
7876 *****************************************************************************/
7878 static void iwl3945_setup_deferred_work(struct iwl3945_priv *priv)
7880 priv->workqueue = create_workqueue(DRV_NAME);
7882 init_waitqueue_head(&priv->wait_command_queue);
7884 INIT_WORK(&priv->up, iwl3945_bg_up);
7885 INIT_WORK(&priv->restart, iwl3945_bg_restart);
7886 INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish);
7887 INIT_WORK(&priv->scan_completed, iwl3945_bg_scan_completed);
7888 INIT_WORK(&priv->request_scan, iwl3945_bg_request_scan);
7889 INIT_WORK(&priv->abort_scan, iwl3945_bg_abort_scan);
7890 INIT_WORK(&priv->rf_kill, iwl3945_bg_rf_kill);
7891 INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update);
7892 INIT_DELAYED_WORK(&priv->post_associate, iwl3945_bg_post_associate);
7893 INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
7894 INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
7895 INIT_DELAYED_WORK(&priv->scan_check, iwl3945_bg_scan_check);
7897 iwl3945_hw_setup_deferred_work(priv);
7899 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
7900 iwl3945_irq_tasklet, (unsigned long)priv);
7903 static void iwl3945_cancel_deferred_work(struct iwl3945_priv *priv)
7905 iwl3945_hw_cancel_deferred_work(priv);
7907 cancel_delayed_work_sync(&priv->init_alive_start);
7908 cancel_delayed_work(&priv->scan_check);
7909 cancel_delayed_work(&priv->alive_start);
7910 cancel_delayed_work(&priv->post_associate);
7911 cancel_work_sync(&priv->beacon_update);
7914 static struct attribute *iwl3945_sysfs_entries[] = {
7915 &dev_attr_antenna.attr,
7916 &dev_attr_channels.attr,
7917 &dev_attr_dump_errors.attr,
7918 &dev_attr_dump_events.attr,
7919 &dev_attr_flags.attr,
7920 &dev_attr_filter_flags.attr,
7921 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
7922 &dev_attr_measurement.attr,
7924 &dev_attr_power_level.attr,
7925 &dev_attr_retry_rate.attr,
7926 &dev_attr_rf_kill.attr,
7927 &dev_attr_rs_window.attr,
7928 &dev_attr_statistics.attr,
7929 &dev_attr_status.attr,
7930 &dev_attr_temperature.attr,
7931 &dev_attr_tx_power.attr,
7936 static struct attribute_group iwl3945_attribute_group = {
7937 .name = NULL, /* put in device directory */
7938 .attrs = iwl3945_sysfs_entries,
7941 static struct ieee80211_ops iwl3945_hw_ops = {
7942 .tx = iwl3945_mac_tx,
7943 .start = iwl3945_mac_start,
7944 .stop = iwl3945_mac_stop,
7945 .add_interface = iwl3945_mac_add_interface,
7946 .remove_interface = iwl3945_mac_remove_interface,
7947 .config = iwl3945_mac_config,
7948 .config_interface = iwl3945_mac_config_interface,
7949 .configure_filter = iwl3945_configure_filter,
7950 .set_key = iwl3945_mac_set_key,
7951 .get_stats = iwl3945_mac_get_stats,
7952 .get_tx_stats = iwl3945_mac_get_tx_stats,
7953 .conf_tx = iwl3945_mac_conf_tx,
7954 .get_tsf = iwl3945_mac_get_tsf,
7955 .reset_tsf = iwl3945_mac_reset_tsf,
7956 .beacon_update = iwl3945_mac_beacon_update,
7957 .hw_scan = iwl3945_mac_hw_scan
7960 static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
7963 struct iwl3945_priv *priv;
7964 struct ieee80211_hw *hw;
7965 struct iwl_3945_cfg *cfg = (struct iwl_3945_cfg *)(ent->driver_data);
7967 unsigned long flags;
7968 DECLARE_MAC_BUF(mac);
7970 /* Disabling hardware scan means that mac80211 will perform scans
7971 * "the hard way", rather than using device's scan. */
7972 if (iwl3945_param_disable_hw_scan) {
7973 IWL_DEBUG_INFO("Disabling hw_scan\n");
7974 iwl3945_hw_ops.hw_scan = NULL;
7977 if ((iwl3945_param_queues_num > IWL_MAX_NUM_QUEUES) ||
7978 (iwl3945_param_queues_num < IWL_MIN_NUM_QUEUES)) {
7979 IWL_ERROR("invalid queues_num, should be between %d and %d\n",
7980 IWL_MIN_NUM_QUEUES, IWL_MAX_NUM_QUEUES);
7985 /* mac80211 allocates memory for this device instance, including
7986 * space for this driver's private structure */
7987 hw = ieee80211_alloc_hw(sizeof(struct iwl3945_priv), &iwl3945_hw_ops);
7989 IWL_ERROR("Can not allocate network device\n");
7993 SET_IEEE80211_DEV(hw, &pdev->dev);
7995 hw->rate_control_algorithm = "iwl-3945-rs";
7997 IWL_DEBUG_INFO("*** LOAD DRIVER ***\n");
8001 priv->pci_dev = pdev;
8004 /* Select antenna (may be helpful if only one antenna is connected) */
8005 priv->antenna = (enum iwl3945_antenna)iwl3945_param_antenna;
8006 #ifdef CONFIG_IWL3945_DEBUG
8007 iwl3945_debug_level = iwl3945_param_debug;
8008 atomic_set(&priv->restrict_refcnt, 0);
8010 priv->retry_rate = 1;
8012 priv->ibss_beacon = NULL;
8014 /* Tell mac80211 and its clients (e.g. Wireless Extensions)
8015 * the range of signal quality values that we'll provide.
8016 * Negative values for level/noise indicate that we'll provide dBm.
8017 * For WE, at least, non-0 values here *enable* display of values
8018 * in app (iwconfig). */
8019 hw->max_rssi = -20; /* signal level, negative indicates dBm */
8020 hw->max_noise = -20; /* noise level, negative indicates dBm */
8021 hw->max_signal = 100; /* link quality indication (%) */
8023 /* Tell mac80211 our Tx characteristics */
8024 hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;
8026 /* 4 EDCA QOS priorities */
8029 spin_lock_init(&priv->lock);
8030 spin_lock_init(&priv->power_data.lock);
8031 spin_lock_init(&priv->sta_lock);
8032 spin_lock_init(&priv->hcmd_lock);
8034 for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++)
8035 INIT_LIST_HEAD(&priv->ibss_mac_hash[i]);
8037 INIT_LIST_HEAD(&priv->free_frames);
8039 mutex_init(&priv->mutex);
8040 if (pci_enable_device(pdev)) {
8042 goto out_ieee80211_free_hw;
8045 pci_set_master(pdev);
8047 /* Clear the driver's (not device's) station table */
8048 iwl3945_clear_stations_table(priv);
8050 priv->data_retry_limit = -1;
8051 priv->ieee_channels = NULL;
8052 priv->ieee_rates = NULL;
8053 priv->band = IEEE80211_BAND_2GHZ;
8055 err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
8057 err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
8059 printk(KERN_WARNING DRV_NAME ": No suitable DMA available.\n");
8060 goto out_pci_disable_device;
8063 pci_set_drvdata(pdev, priv);
8064 err = pci_request_regions(pdev, DRV_NAME);
8066 goto out_pci_disable_device;
8068 /* We disable the RETRY_TIMEOUT register (0x41) to keep
8069 * PCI Tx retries from interfering with C3 CPU state */
8070 pci_write_config_byte(pdev, 0x41, 0x00);
8072 priv->hw_base = pci_iomap(pdev, 0, 0);
8073 if (!priv->hw_base) {
8075 goto out_pci_release_regions;
8078 IWL_DEBUG_INFO("pci_resource_len = 0x%08llx\n",
8079 (unsigned long long) pci_resource_len(pdev, 0));
8080 IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base);
8082 /* Initialize module parameter values here */
8084 /* Disable radio (SW RF KILL) via parameter when loading driver */
8085 if (iwl3945_param_disable) {
8086 set_bit(STATUS_RF_KILL_SW, &priv->status);
8087 IWL_DEBUG_INFO("Radio disabled.\n");
8090 priv->iw_mode = IEEE80211_IF_TYPE_STA;
8092 printk(KERN_INFO DRV_NAME
8093 ": Detected Intel Wireless WiFi Link %s\n", priv->cfg->name);
8095 /* Device-specific setup */
8096 if (iwl3945_hw_set_hw_setting(priv)) {
8097 IWL_ERROR("failed to set hw settings\n");
8101 if (iwl3945_param_qos_enable)
8102 priv->qos_data.qos_enable = 1;
8104 iwl3945_reset_qos(priv);
8106 priv->qos_data.qos_active = 0;
8107 priv->qos_data.qos_cap.val = 0;
8109 iwl3945_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6);
8110 iwl3945_setup_deferred_work(priv);
8111 iwl3945_setup_rx_handlers(priv);
8113 priv->rates_mask = IWL_RATES_MASK;
8114 /* If power management is turned on, default to AC mode */
8115 priv->power_mode = IWL_POWER_AC;
8116 priv->user_txpower_limit = IWL_DEFAULT_TX_POWER;
8118 spin_lock_irqsave(&priv->lock, flags);
8119 iwl3945_disable_interrupts(priv);
8120 spin_unlock_irqrestore(&priv->lock, flags);
8122 err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group);
8124 IWL_ERROR("failed to create sysfs device attributes\n");
8125 goto out_release_irq;
8129 iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS,
8130 CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
8132 iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
8133 err = iwl3945_poll_bit(priv, CSR_GP_CNTRL,
8134 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
8135 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
8137 IWL_DEBUG_INFO("Failed to init the card\n");
8138 goto out_remove_sysfs;
8140 /* Read the EEPROM */
8141 err = iwl3945_eeprom_init(priv);
8143 IWL_ERROR("Unable to init EEPROM\n");
8144 goto out_remove_sysfs;
8146 /* MAC Address location in EEPROM same for 3945/4965 */
8147 get_eeprom_mac(priv, priv->mac_addr);
8148 IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr));
8149 SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
8151 err = iwl3945_init_channel_map(priv);
8153 IWL_ERROR("initializing regulatory failed: %d\n", err);
8154 goto out_remove_sysfs;
8157 err = iwl3945_init_geos(priv);
8159 IWL_ERROR("initializing geos failed: %d\n", err);
8160 goto out_free_channel_map;
8163 err = ieee80211_register_hw(priv->hw);
8165 IWL_ERROR("Failed to register network device (error %d)\n", err);
8169 priv->hw->conf.beacon_int = 100;
8170 priv->mac80211_registered = 1;
8171 pci_save_state(pdev);
8172 pci_disable_device(pdev);
8177 iwl3945_free_geos(priv);
8178 out_free_channel_map:
8179 iwl3945_free_channel_map(priv);
8181 sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
8184 destroy_workqueue(priv->workqueue);
8185 priv->workqueue = NULL;
8186 iwl3945_unset_hw_setting(priv);
8189 pci_iounmap(pdev, priv->hw_base);
8190 out_pci_release_regions:
8191 pci_release_regions(pdev);
8192 out_pci_disable_device:
8193 pci_disable_device(pdev);
8194 pci_set_drvdata(pdev, NULL);
8195 out_ieee80211_free_hw:
8196 ieee80211_free_hw(priv->hw);
8201 static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
8203 struct iwl3945_priv *priv = pci_get_drvdata(pdev);
8204 struct list_head *p, *q;
8206 unsigned long flags;
8211 IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n");
8213 set_bit(STATUS_EXIT_PENDING, &priv->status);
8217 /* make sure we flush any pending irq or
8218 * tasklet for the driver
8220 spin_lock_irqsave(&priv->lock, flags);
8221 iwl3945_disable_interrupts(priv);
8222 spin_unlock_irqrestore(&priv->lock, flags);
8224 iwl_synchronize_irq(priv);
8226 /* Free MAC hash list for ADHOC */
8227 for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) {
8228 list_for_each_safe(p, q, &priv->ibss_mac_hash[i]) {
8230 kfree(list_entry(p, struct iwl3945_ibss_seq, list));
8234 sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
8236 iwl3945_dealloc_ucode_pci(priv);
8239 iwl3945_rx_queue_free(priv, &priv->rxq);
8240 iwl3945_hw_txq_ctx_free(priv);
8242 iwl3945_unset_hw_setting(priv);
8243 iwl3945_clear_stations_table(priv);
8245 if (priv->mac80211_registered) {
8246 ieee80211_unregister_hw(priv->hw);
8249 /*netif_stop_queue(dev); */
8250 flush_workqueue(priv->workqueue);
8252 /* ieee80211_unregister_hw calls iwl3945_mac_stop, which flushes
8253 * priv->workqueue... so we can't take down the workqueue
8255 destroy_workqueue(priv->workqueue);
8256 priv->workqueue = NULL;
8258 pci_iounmap(pdev, priv->hw_base);
8259 pci_release_regions(pdev);
8260 pci_disable_device(pdev);
8261 pci_set_drvdata(pdev, NULL);
8263 iwl3945_free_channel_map(priv);
8264 iwl3945_free_geos(priv);
8266 if (priv->ibss_beacon)
8267 dev_kfree_skb(priv->ibss_beacon);
8269 ieee80211_free_hw(priv->hw);
8274 static int iwl3945_pci_suspend(struct pci_dev *pdev, pm_message_t state)
8276 struct iwl3945_priv *priv = pci_get_drvdata(pdev);
8278 if (priv->is_open) {
8279 set_bit(STATUS_IN_SUSPEND, &priv->status);
8280 iwl3945_mac_stop(priv->hw);
8284 pci_set_power_state(pdev, PCI_D3hot);
8289 static int iwl3945_pci_resume(struct pci_dev *pdev)
8291 struct iwl3945_priv *priv = pci_get_drvdata(pdev);
8293 pci_set_power_state(pdev, PCI_D0);
8296 iwl3945_mac_start(priv->hw);
8298 clear_bit(STATUS_IN_SUSPEND, &priv->status);
8302 #endif /* CONFIG_PM */
8304 /*****************************************************************************
8306 * driver and module entry point
8308 *****************************************************************************/
8310 static struct pci_driver iwl3945_driver = {
8312 .id_table = iwl3945_hw_card_ids,
8313 .probe = iwl3945_pci_probe,
8314 .remove = __devexit_p(iwl3945_pci_remove),
8316 .suspend = iwl3945_pci_suspend,
8317 .resume = iwl3945_pci_resume,
8321 static int __init iwl3945_init(void)
8325 printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
8326 printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
8328 ret = iwl3945_rate_control_register();
8330 IWL_ERROR("Unable to register rate control algorithm: %d\n", ret);
8334 ret = pci_register_driver(&iwl3945_driver);
8336 IWL_ERROR("Unable to initialize PCI module\n");
8337 goto error_register;
8339 #ifdef CONFIG_IWL3945_DEBUG
8340 ret = driver_create_file(&iwl3945_driver.driver, &driver_attr_debug_level);
8342 IWL_ERROR("Unable to create driver sysfs file\n");
8349 #ifdef CONFIG_IWL3945_DEBUG
8351 pci_unregister_driver(&iwl3945_driver);
8354 iwl3945_rate_control_unregister();
8358 static void __exit iwl3945_exit(void)
8360 #ifdef CONFIG_IWL3945_DEBUG
8361 driver_remove_file(&iwl3945_driver.driver, &driver_attr_debug_level);
8363 pci_unregister_driver(&iwl3945_driver);
8364 iwl3945_rate_control_unregister();
8367 module_param_named(antenna, iwl3945_param_antenna, int, 0444);
8368 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
8369 module_param_named(disable, iwl3945_param_disable, int, 0444);
8370 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
8371 module_param_named(hwcrypto, iwl3945_param_hwcrypto, int, 0444);
8372 MODULE_PARM_DESC(hwcrypto,
8373 "using hardware crypto engine (default 0 [software])\n");
8374 module_param_named(debug, iwl3945_param_debug, int, 0444);
8375 MODULE_PARM_DESC(debug, "debug output mask");
8376 module_param_named(disable_hw_scan, iwl3945_param_disable_hw_scan, int, 0444);
8377 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
8379 module_param_named(queues_num, iwl3945_param_queues_num, int, 0444);
8380 MODULE_PARM_DESC(queues_num, "number of hw queues.");
8383 module_param_named(qos_enable, iwl3945_param_qos_enable, int, 0444);
8384 MODULE_PARM_DESC(qos_enable, "enable all QoS functionality");
8386 module_exit(iwl3945_exit);
8387 module_init(iwl3945_init);